Heat Release Adhesives (Epoxy) 放熱接着剤 1液熱硬化放熱接着剤 Single Component Heat Curable Heat Release Adhesive 2液常温硬化放熱接着剤 Two-Component Room Temperature Curable Heat Release Adhesive 特徴 Features 用途例 Application 積水化学工業株式会社 高機能プラスチックスカンパニー エレクトロニクス営業部 基板・半導体材料営業所 TEL:03-5521-0931 SEKISUI CHEMICAL CO.,LTD. High Performance Plastics Company PCB/Semiconductor Materials Sales Branch TEL:03-5521-0931 問合せ先 Contact us ★低弾性と接着性を両立 Achieve both low-modulus and adhesiveness ★薄膜(BLT 15um)により、低熱抵抗化 Achieve low thermal resistance because of "BLT 15um" ★シロキサンフリー Low molecular siloxane free ★シロキサンフリー Low molecular siloxane free ★良好な放熱性 Good thermal conductivity ★高靱性な接着剤 Adhesive with toughness 0 1 2 3 4 5 6 7 8 9 接着力 Adhesive force (N/cm²) 積水放熱接着剤 Normal Type アルミ (AI) 銅 (Cu) ステンレス (stainless) シリコーン接着剤 (General Silicone adhesive) 物性 Properties Thermal Conductivity Viscosity BLT Curing condition Hardness (Type D) Adhesive Strength (Al/Al) Breakdown Voltage Normal 2.5 W/m・K 70 Pa・s 15 μm 150℃ 2h 50±5 7.5 N/cm² >20 kV/mm Low Temp Cure 2.5 W/m・K 100 Pa・s 20 μm 85℃ 30min 40±5 4.0 N/cm² >20 kV/mm 物性 Properties Thermal Conductivity Viscosity Viscosity After Mixing BLT Curing Condition Hardness (Type D) Adhesive Strength (Al/Al) Breakdown Voltage PartA / PartB 2.9 W/m・K A:120 Pa・s / B:80 Pa・s 100 Pa・s 150 um 25℃ 24h 60±5 9.0 N/cm² ≧ 20 kV/mm 特徴 Features 用途例 Application with Paste ▲60℃ without Paste 180℃ 120℃ 1E+11 1E+10 1E+09 1E+08 1E+07 Heat radiation of motor (coil etc.) ★モーター用放熱(コイル等) To fix LiB ★LiBの固定 Heat Spreader