CBLO - vetimplants.comangulation). In doing so there is no secondary translation, i.e. the proximal anatomic ... VOI is proud to sponsor labs that teach CBLO procedures by board certified

CBLO

5.1

www.vetimplants.com email: [email protected] . 436 . 6540

CBL

O |

CBLO

| CB

LOCBLO PlatesPlaques CBLO | CBLOプレート

CORA based leveling osteotomy is a procedure where tibial plateau slope is modified by centering the saw blade (ACA) at the location of the CORA (center of rotation of angulation). In doing so there is no secondary translation, i.e. the proximal anatomic axis and distal anatomic axis are aligned. The TPA/PTA angle lies between 88 degrees and 90 degrees.

The osteotomy is stabilized with a veterinary orthopedic implant (VOI) specially de-signed locking plate and countersink compression screw (CCS).

Advantages of the technique include the preservation of the proximal tibial epiphysis which allows for :

• Ease of surgical planning and technique • Application of ancillary stabilizing procedures • Rapid healing of the osteotomy (6-7 weeks)• Increase bone contact and compression of the entire osteotomy facilitating early bone union• Increase bone target for additional implant application for large and giant breeds of dogs• Ample target for implant application in small/toy breeds of dogs• Preservation of the proximal tibial growth plate in juvenile dogs with CCL injury• Facilitating treatment of dogs with excessive slope, protects CrCl and intra-articular grafts• Facilitating treatment of CCL injury with concurrent patella luxation• Normal, long-term appearance of articular cartilage

> 2.0 ..................................................................9-15 lbs> 2.4 ............................................................... 15-25 lbs> 2.7 ............................................................... 25-30 lbs> 3.5 Small .................................................. 35-50 lbs> 3.5 ............................................................... 50-80 lbs> 3.5 Broad ..............................................80-100 lbs> 3.5 Jumbo ..........................................100-150 lbs> Jumbo + ................................................... 150+ lbs

CBLO PATIENT WEIGHT RECOMMENDATIONS

CBLO Power and BladesCBLO surgeries are still relatively new. All power equipment and blades used for TPLO can also be used to perform CBLO surgeries simply by adjusting the position of the TPLO attachment.

CBLO Labs and Continued EducationVOI is proud to sponsor labs that teach CBLO procedures by board certified surgeons worldwide who are at the forefront of the advancements of this procedure. Please visit our website for a class or session near you.

This plate selection chart is a guide. The plate, pin and screw selections remains the surgeon’s decision, considering specific factors such as complexity of the fracture, age of the patient, body mass index, owner compliance, etc. We encourage surgeons to call VOI and be placed in touch with board certified surgeons on staff to review x-rays and offer FREE recommendations as to what implants to be used in uncommon / challenging situations in order to achieve desired outcomes.

5.2


CBLO

| CBLO | CBLO

Countersink Compression ScrewsVis de compression automèchante | カウンターシンク圧縮ネジ

CODE# LENGTH (mm)

CCS 450.28 28CCS 450.30 30CCS 450.32 32CCS 450.34 34CCS 450.36 36CCS 450.38 38CCS 450.40 40CCS 450.42 42CCS 450.44 44CCS 450.46 46CCS 450.48 48CCS 450.50 50CCS 450.52 52CCS 450.54 54CCS 450.56 56CCS 450.58 58CCS 450.60 60CCS 450.65 65CCS 450.70 70CCS 450.75 75

CODE# LENGTH (mm)

CCS 300.20 20CCS 300.22 22CCS 300.24 24CCS 300.26 26CCS 300.28 28CCS 300.30 30CCS 300.32 32CCS 300.34 34CCS 300.36 36CCS 300.38 38CCS 300.40 40

CODE# LENGTH (mm)

CCS 240.18 18CCS 240.20 20CCS 240.22 22CCS 240.24 24CCS 240.26 26

2.4 mm Countersink Compression Screws - T8Product Features

• Cancellous Partial Thread• Diameter of thread: 2.4 mm• Thread pitch: 1.0 mm• Diameter of core: 2.0 mm• Diameter of head: 3.0 mm


• Cancellous Partial Thread• Diameter of thread: 3.0 mm• Thread pitch: 1.25 mm• Diameter of core: 2 .0 mm• Diameter of head: 3.5 mm


• Cancellous Partial Thread• Diameter of thread: 4.5 mm• Thread pitch: 1.75 mm• Diameter of core: 3.0 mm• Diameter of head: 5.0 mm

NOTEStore and sterilize your Countersink Compression Screws in boxes

specifically designed for these screws on page 12.3

CC Screw Size Cannulated Drill Bit Size K Wire Size

2.4 mm CAN 2.0 150 QCK 0.0453.0 mm CAN 2.0 150 QCK 0.0454.0 mm CAN 3.2 225 QCK 0.062

Bit and Wire Selection Chart for CCS

5.3


CBL

O |

CBLO

| CB

LO

2.0 Locking CBLO PlatesCODE: DT L CBLO 2.0 L (left)CODE: DT L CBLO 2.0 R (right)Product Features

• Double threaded compression with locking holes• Pre-contoured• Low contact • Use with 0.027 K Wire• Use with SLH ST and HLH ST locking head screws

CBLO PlatesPlaques CBLO | CBLOプレート





Length: 35 mmWidth: 6.0 mm

Thickness: 2.5 mm


Thickness: 2.5 mm


Thickness: 2.5 mm

Indicates locking holes

Ruler (mm)0 10 20 30 40 50 60 70 80 90Please specify left or right when ordering CBLO plates

5.4


CBLO

| CBLO | CBLO

Ruler (mm)0 10 20 30 40 50 60 70 80 90

Indicates locking holes

3.5 mm Small Locking CBLO PlatesCODE: DT L CBLO 3.5 SM L (left)CODE: DT L CBLO 3.5 SM R (right)Product Features


CBLO PlatesPlaques CBLO | CBLOプレート

3.5 mm Locking CBLO PlatesCODE: DT L CBLO 3.5 L (left)CODE: DT L CBLO 3.5 R (right)Product Features


3.5 mm Broad Locking CBLO PlatesCODE: DT L CBLO 3.5B L (left)CODE: DT L CBLO 3.5B (right)Product Features


Length: 77.8 mmWidth: 11 mm

Thickness: 3 mm

Length: 95 mmWidth: 12.8 mmThickness: 4 mm

Please specify left or right when ordering CBLO plates


Thickness: 3.4 mm

3.5 mm JUMBO Locking CBLO Plates (Not Pictured)CODE: DT L 3.5 CBLO Jumbo L (left)CODE: DT L 3.5 CBLO Jumbo R (right)Product Features


5.5


CBL

O |

CBLO

| CB

LOCBLO InstrumentationInstrumentation CBLO | CBLO器具

Compression Sleeves for Countersink Compression ScrewsCODE: CCS-CS-2.4CODE: CCS-CS-3.0CODE: CCS-CS-4.5

Compression Sleeve Handles for Countersink Compression ScrewsCODE: CCS-HDL-2.4/3.0CODE: CCS-HDL-4.5

Cannulated Star Drive Screwdriver for Countersink Compression ScrewsCODE: CCS-CD-T8 (for CCS 2.4 & 3.0) - 210 mm LongCODE: CCS-CD-T15 (for CCS 4.5) - 263 mm long

CCS - CS-2.4

CCS - CS-3.0

CCS - CS-4.5

CCS-HDL-4.5 - 139 mm

Not to scale

5.6


CBLO

| CBLO | CBLO

CBLO InstrumentationInstrumentation CBLO | CBLO器具

Cannulated Drill Bits for K WiresCannulated drill bits are used with this system.

CODE: CAN 2.0 150 QCK | Length: 150 mm | Use with 0.045 K Wire

CODE: CAN 3.2 170 QCK | Length: 170 mm | Use with 0.054 K Wire

CODE :CAN 3.2 225 QCK | Length: 225 mm | Use with 0.062 K Wire

CODE: 2.7 JAC 130 CAN | Length: 130 mm | Use with 0.045 K Wire

K Wires used in CBLODouble trocar ends.

CODE: 0.027 K Wire | .027 mm Ø x 7 inches long | Trocar/Trocar Smooth





Additional K Wire sizes available in the K Wire and Pins Section.

K Wires are used for temporary fixation to hold the plates while preparing them for final attachment and for driving the Countersink Compression Screws (CCS) during the CBLO procedure.

5.7


Ref

eren

ce |

Réfé

renc

e | 参

照CBLO SterilizationStérilisation CBLO | CBLO滅菌

CBLO TraysCODE: CBLO TRAY 2.0/2.4/2.7CODE: CBLO TRAY 3.5 SM/3.5/3.5BProduct features:

• Annodized surface• Perforated for steam release• Outlined images make it easy to manage and store your implants,

screws and instruments• Above trays are designed to fit into the TPLO case for storage and

sterilizationCODE:TPLO CASE - TPLO case is in the Screw Racks and Sterilization Cases Section. Don't forget your sterimat!

5.8


CBLO

| CBLO | CBLO

CBLO Rotation ChartCharte de rotation CBLO | CBLO回転チャート

Try our CBLO Rotation calculator at www.vetimplants.com

8mm 10mm 12mm 15mm 18mm 21mm 24mm 27mm 30mm 33mm

5 0.7 0.9 1 1.3 1.6 1.8 2.1 2.4 2.6 2.96 0.8 1 1.3 1.6 1.9 2.2 2.5 2.8 3.1 3.57 1 1.2 1.5 1.8 2.2 2.6 2.9 3.3 3.7 48 1.1 1.4 1.7 2.1 2.5 2.9 3.3 3.8 4.2 4.69 1.3 1.6 1.9 2.4 2.8 3.3 3.8 4.2 4.7 5.210 1.4 1.7 2.1 2.6 3.1 3.7 4.2 4.7 5.2 5.811 1.5 1.9 2.3 2.9 3.5 4 4.6 5.2 5.8 6.312 1.7 2.1 2.5 3.1 3.8 4.4 5 5.6 6.3 6.913 1.8 2.3 2.7 3.4 4.1 4.8 5.4 6.1 6.8 7.514 1.9 2.4 2.9 3.7 4.4 5.1 5.8 6.6 7.3 815 2.1 2.6 3.1 3.9 4.7 5.5 6.3 7 7.8 8.616 2.2 2.8 3.3 4.2 5 5.8 6.7 7.5 8.4 9.217 2.4 3 3.5 4.4 5.3 6.2 7.1 8 8.9 9.818 2.5 3.1 3.8 4.7 5.6 6.6 7.5 8.4 9.4 10.319 2.6 3.3 4 5 5.9 6.9 7.9 8.9 9.9 10.920 2.8 3.5 4.2 5.2 6.3 7.3 8.3 9.4 10.4 11.521 2.9 3.6 4.4 5.5 6.6 7.7 8.7 9.8 10.9 1222 3.1 3.8 4.6 5.7 6.9 8 9.2 10.3 11.4 12.623 3.2 4 4.8 6 7.2 8.4 9.6 10.8 12 13.224 3.3 4.2 5 6.2 7.5 8.7 10 11.2 12.5 13.725 3.5 4.3 5.2 6.5 7.8 9.1 10.4 11.7 13 14.326 3.6 4.5 5.4 6.7 8.1 9.4 10.8 12.1 13.5 14.827 3.7 4.7 5.6 7 8.4 9.8 11.2 12.6 14 15.428 3.9 4.8 5.8 7.3 8.7 10.2 11.6 13.1 14.5 1629 4 5 6 7.5 9 10.5 12 13.5 15 16.530 4.1 5.2 6.2 7.8 9.3 10.9 12.4 14 15.5 17.131 4.3 5.3 6.4 8 9.6 11.2 12.8 14.4 16 17.632 4.4 5.5 6.6 8.3 9.9 11.6 13.2 14.9 16.5 18.233 4.5 5.7 6.8 8.5 10.2 11.9 13.6 15.3 17 18.734 4.7 5.8 7 8.8 10.5 12.3 14 15.8 17.5 19.3

CBLO/TPLO Blade Size (mm)CORAMagnitude

CBLO - vetimplants.comangulation). In doing so there is no secondary translation, i.e. the proximal anatomic ... VOI is proud to sponsor labs that teach CBLO procedures by board certified

Documents