Additive Jet Fuel Injection CBI Additive Jet Fuel Injection System in CSC Approved 20´ Containers NATO Code 4235-22-607-9088t Automated Injecon The CBI Addive Injecon Container unit has been developed specifically for military pur- poses and over the past decade it has proven its stability in harsh condions around the world, in which all the components has been working flawlessly. The unit has been developed in accordance with NATO specificaons and has been ap- proved by NATO for use with Aviaon type Turbine Fuels (Kerosene) such as • NATO F-34 (JP-8) • NATO F35 • JP-8+100 (B-fluid) Injecon Addives (others available) Addive one FSll an-icing addive (assumed) ≤ 2.000 PPM Addive two Corrosion inhibitor (assumed) ≤ 120 PPM Addive three SDA Stadis 450 (assumed) ≤ 36 PPM All the equipment is fied into a standard CSC approved (ISO 668, ISO 1161) container. Ac- cess is provided through two standard con- tainer doors in one end to enter the contain- er, and one door on the side to allow access for pallet tanks (1,000 liter) by forkliſt, and a window to oversee the operaon. Furthermore there is a bracket for one 200 lit- er Chemical Drum with Corrosion Inhibitor; a 20 liter drum of SDA Stadis and a sump inside the container to take any unwanted of the ad- dives or from the pallet tank. The sump has a drain valve. The container is insulated with 45 mm pre-in- sulated plates covered with galvanized sheets and have self-regulated electrical heang el- ements (EEx) and light (Ex) installed with EU connecon outside the container. Using the customized con- trol unit the Addive Fuel Injecon offers the follow- ing advantages • Fully automated Injecon • Easy to operate • Easy to install • Fied into a 20´ CSC ap- proved container • Blending to exact specifi- caon TURNKEY SOLUTIONS There are many variables to take into account when fing an Addive Injec- on System and our highly skilled engineers will adapt our system to fit your exact requirements. TECHNICAL SUPPORT We are with you all the way. Before, during and aſter the installaon to secure a flaw- less integraon and opera- on. ZERO DOWNTIME As a central part of a fuel delivery system; mechanical stability, toughness and dura- bility is an important aspect of the manufacturing and design philosophy. For more informaon on these or other of our prod- ucts or services please visit us on the Web at: www.cbi.dk The specificaons are based on specific requirements for injecon. Other injecon specificaons are available on request.