CATTLE CARE & HANDLING GUIDELINES - Nebraska Cattle Care & Handling Guideline… · CATTLE CARE & HANDLING GUIDELINES 7 DISEASE PREVENTION, HEALTH CARE, AND CATTLE MANAGEMENT PRACTICES

1CATTLE CARE & HANDLING GUIDELINES

A SAFE, WHOLESOME ANDHEALTHY BEEF SUPPLY

CATTLE CARE & HANDLING GUIDELINES

Beef cattle producers take pride in their responsibility to provide proper care to cattle.

The Code of Cattle Care below lists general recommendations for care and handling of cattle:

Provide necessary food, water and care to protect the health and well-being of animals.

Provide disease prevention practices to protect herd health, including access to veterinary medical care.

Provide facilities that allow safe, humane, and effi cient movement and or restraint of cattle.

Use appropriate methods to humanely euthanize terminally sick or injured livestock and dispose of them properly.

Provide personnel with training experience to properly handle and care for cattle.

Make timely observations of cattle to ensure basic needs are being met.

Minimize stress when transporting cattle.

Keep updated on advancements and changes in the industry to make decisions based upon sound production practices and consideration for animal well-being.

Persons who willfully mistreat animals will not be tolerated.



4 CATTLE CARE & HANDLING GUIDELINES

INTRODUCTIONCattlemen have long recognized the need to properly care for livestock. ound animal husbandry practices, based on decades of practical experience and research, are known to impact the well- being of cattle, individual animal health and herd productivity. Cattle are produced in very diverse environments and geographic locations in the United tates. There is not one specifi c set of production practices that can be recommended for all cattle producers. Personal experience, Beef Quality Assurance (BQA) training and professional judgment can serve as a valuable resource for providing proper animal care. The following information is to be used as an educational resource, all production practices should be adapted to specifi c needs of individual operations.


FEEDING AND NUTRITION Diets for all classes of beef cattle should meet the recommendations of the National esearch Council (N C) and or recommendations of a nutritional consultant. For local recommendations and advice, contact your state agricultural extension as a potential resource.

Cattle must have access to an adequate water supply. Estimated water requirements for all classes of beef cattle in various production settings are described in the National Academy of ciences N C Nutrient

equirements of Beef Cattle. Provide adequate feed. Avoid feed and water interruption longer than

hours. Feedstuffs and feed ingredients should be of satisfactory quality to meet

nutritional needs. Under certain circumstances (e.g., droughts, frosts, and floods), test

feedstuffs or other dietary components to determine the presence of substances that can be detrimental to cattle well-being, such as nitrates, prussic acid, mycotoxins, etc.

Producers should become familiar with potential micronutrient deficiencies or excesses in their respective geographical areas and use appropriately formulated supplements.

Use only U DA, FDA and EPA approved products for use in cattle. These products must be used in accordance with the approved product use guidelines.


Feeding Guidelines for Beef CowsBody condition scoring of beef cows is a scientifically approved method to assess nutritional status. Body condition scores (BC ) range from (emaciated) to 9 (obese).

A BC of - is most desirable for health and production. A BC of or under is not acceptable and immediate corrective action should be taken.

During periods of prolonged drought and widespread shortages of hay and other feedstuffs, the average BC of cows within a herd may temporarily decline. This is not desirable, but may be outside the cattle owner’s control until drought relief is achieved.

During periods of decreasing temperature, feeding plans should reflect increased energy needs. See additional Cold Stress proceedures (pg. 20)

Feeding Guidelines for Stocker Cattle tockers are raised on a wide variety of forages (native pasture, annuals,

improved pasture) with minimal additional nutrient supplementation. n growing forages, stocking rates should be established that meet

production goals for growth and performance. n dormant pastures, supplement cattle as needed to meet maintenance

or growth requirements for the animal’s weight, breed, and age as established by N C guidelines and targeted production goals of the operation.

Feeding Guidelines for Feeder CattleFeedyard cattle can eat diverse diets, but the typical ration contains a high proportion of grain(s) (corn, milo, barley, grain by-products) and a smaller proportion of roughages (hay, straw, silage, hulls, etc.). The N C lists the dietary requirements of beef cattle (based on weight, weather, frame score, etc.) and the feeding value of various commodities included in the diet.

Consult a nutritionist (private consultant, university or feed company employee) for advice on ration formulation and feeding programs.

Avoid sudden changes in ration composition or amount of ration offered. Monitor changes in weight gain, feces, incidence of digestive upsets

(acidosis or bloat) and foot health to help evaluate the feeding program. A small percentage of cattle in feedyards develop laminitis or founder.

Mild cases do not affect animal welfare or performance however, hooves that are double their normal length compromise movement. In these instances, the individual animal should be provided appropriate care and marketed as soon as possible.


DISEASE PREVENTION, HEALTH CARE, AND CATTLE MANAGEMENT PRACTICES

ike other species, cattle are susceptible to infectious diseases, metabolic disorders, toxins, parasites, neoplasia and injury. Control programs should be based on risk assessment and efficacy of available products. Economic losses are reduced by early intervention through health management programs.

ealthy herds are more productive. Management programs should be science-based and common-sense driven.

The producer should work with a veterinarian to determine the risk of infectious, metabolic and toxic diseases and to develop effective management programs when designing a herd health plan. A VeterinaryClient Patient elationship (VCP ) is strongly encouraged.

Producers and their employees should have the taining and ability to recognize common health problems and know how to properly utilize animal health products and other control measures.

When prevention or control measures are ineffective, the producer should promptly contact a veterinarian for a diagnosis and treatment program to reduce animal suffering and animal losses.


A Producer’s Guide for Judicious Use of Antimicrobials in Cattle. Prevent Problems: Emphasize appropriate husbandry, management,

hygiene, routine health examinations, and vaccinations.. Select and Use Antibiotics Carefully: Consult with your veterinarian

on the selection and use of antibiotics. ave a valid reason to use an antibiotic. Therapeutic alternatives should be considered prior to using antimicrobial therapy.

3. Avoid Using Antibiotics Important In Human Medicine As First Line Therapy: Avoid using, as the first antibiotic, those medications that are important to treating strategic human or animal infections.

. Use the Laboratory to Help You Select Antibiotics: Cultures and susceptibility test results should be used to aid in the selection of antimicrobials, as neccessary.

. Combination Antibiotic Therapy Is Discouraged Unless There Is Clear Evidence The Specific Practice Is Beneficial: elect and utilize an antibiotic to affect a cure.

. Avoid Inappropriate Antibiotic Use: Confine therapeutic antimicrobial use to appropriate clinical indications, avoiding inappropriate uses such as for viral infections without bacterial complication.

. Treatment Programs Should Reflect Best Use Principles: egimens for therapeutic antimicrobial use should be optimized using current pharmacological information and principles.

. Treat the Fewest Number of Animals Possible: imit antibiotic use to sick or at risk animals.

9. Treat for the Recommended Time Period: This will minimize the potential for bacteria to become resistant to antimicrobials.

0. Avoid Environmental Contamination with Antibiotics: teps should be taken to minimize antimicrobials reaching the environment through spillage, contaminated ground run off or aerosolization.

. Keep Records of Antibiotic Use: Accurate records of treatment and outcome should be used to evaluate therapeutic regimens and always follow proper withdrawal times.

. Follow Label Directions: Follow label instructions and never use antibiotics other than as labeled without a valid veterinary prescription.

3. Extra-label Antibiotic Use Must follow FDA Regulations: Prescriptions, including extra label use of medications must meet the Animal Medicinal Drug Use Clarification Act (AMDUCA) amendments to the Food, Drug, and Cosmetic Act and its regulations. This includes having a valid VeterinaryClient Patient elationship (VCP ).

. Subtherapeutic Antibiotic Use Is Discouraged: Antibiotic use should be limited to prevention or control disease.


Cows It is desirable for cows to have a BC of at least before the calving

season. During the calving season, cows should be checked regularly for calving

difficulties. First-calf heifers may require more frequent observation and care.

Producers should consider contacting a veterinarian for advice or assistance if cows or heifers have calving difficulties that cannot be corrected by the producer within a reasonable amount of time.

Cows with mild lameness, early eye problems, mastitis or loss of body condition should be examined to determine well-being and promptly marketed as appropriate.

CalvesCastration and dehorning are done for the protection of the animal, other cattle in the herd and people who handle the cattle. In all cases producers may seek guidance from a veterinarian and advisability of analgesia or anesthesia for castration and dehorning of beef cattle, particularly in older animals, where development is more advanced.

Where practical, cattle should be castrated before the age of 3 months (90 days), or at the first available handling opportunity beyond this age.

Where practical, cattle should be dehorned while horn development is still at the horn bud stage, or at the first available handling opportunity beyond this age. This is because at this stage in development the procedure involves less tissue trauma. The selection of polled cattle is an alternative for horn management.

Weaning can be less stressful by castrating and dehorning calves early in life, vaccinating against respiratory diseases prior to weaning, and providing proper pre-weaning nutrition.

Stocker and Feeder Cattle In all cases producers may seek guidance from a veterinarian on the

advisability of vaccination protocols for incoming stocker and feeder cattle based on environmental and rearing conditions. The use of vaccines and parasite control should be based on risk assessment and efficacy of available animal health products.

Producers may seek guidance from a veterinarian on the availability and advisability of analgesia or anesthesia for dehorning of beef cattle, particularly in older animals, where horn development is more advanced.

A local anesthetic should be used when heifers are spayed using the flank approach.

igh risk cattle should be checked at least daily for illness, lameness or other problems during the first 30 days following arrival.


Pregnancy in immature heifers can result in calving difficulties and subsequent trauma to the birth canal, paralysis or death of the heifer. For these reasons it is often more humane to abort pregnant heifers. This should be done under the direction of a veterinarian.

If heifers in the feedyard or a stocker operation deliver a full-term, healthy calf, it should be allowed to nurse to obtain colostrum. At all times, these calves must be handled humanely and provided proper nutrition. Compromised calves or fetuses should be promptly euthanized and disposed of according to local regulations.

Bulling is a term to describe aggressive riding of a steer by one or more penmates. Bullers should be promptly removed from the pen to prevent serious injury.

Tail docking is not recommended. Increasing space per animal and proper bedding are effective means in preventing tail tip injury and necrosis.

IDENTIFICATIONBranding, ear-tagging, ear-notching, and radio frequency identification devices ( FID) are methods of identifying cattle.

If cattle are hot iron or freeze branded, it should be accomplished quickly, expertly and with the proper equipment. BQA guidelines recommend branding on the hip area.

Feeder cattle should not be re-branded when entering a feedlot unless required by law.

Brands should be of appropriate size to achieve clear identification.

Cattle should never be branded on the face or jaw.

Ear notching may be used to identify cattle.

Wattling, ear splitting and other surgical alterations for identification are strongly discouraged.


SHELTER AND HOUSING Cattle in backgrounding facilities or feedyards must be offered adequate

space for comfort, socialization and environmental management. Pen maintenance, including manure harvesting, will help improve pen

conditions. Mud is more of a problem in the winter with low evaporation rates or

improper drainage conditions. Accumulation of mud on cattle should be monitored as a measure of pen condition and cattle care in relation to recent weather conditions.

Feedyards should use dust reduction measures to improve animal performance.

Floors in housing facilities should be properly drained and barns and handling alleys should provide adequate traction to prevent injuries to animals and handlers.

andling alleys and housing pens should be free of sharp edges and protrusions to prevent injury to animals and handlers.

Design and operate alleys and gates to avoid impeding cattle movement. When operating gates and catches, reduce excessive noise, which may cause distress to the animals.

Adjust hydraulic or manual restraining chutes to the appropriate size of cattle to be handled. egular cleaning and maintenance of working parts is imperative to ensure the system functions properly and is safe for the cattle and handlers.

Mechanical and electrical devices used in housing facilities should be safe.


CATTLE HANDLINGAbuse of cattle is not acceptable under any circumstances.

Cattle should not be whipped or hit with objects that could cause injury, pain, or harm.

Kicking, prodding, or any other forceful actions should not be used on non-ambulatory cattle.

The use of sharp or hard solid objects to move cattle is not acceptable. Avoid slippery surfaces, especially where cattle enter a single file alley

leading to a chute or where they exit the chute. rooved concrete, metal grating (not sharp), rubber mats or deep sand can be used to minimize slipping and falling. Quiet handling is essential to minimize slipping. Under most conditions, no more than % of the animals should fall outside the chute. A level of more than % indicates a review of the process may be of value, including asking questions such as is this a cattle temperament issue, has something in the handling area changed that is affecting cattle behavior, etc.

Take advantage of cattle’s flight zone and point of balance to move them. For safety and welfare reasons, minimize the use of electric prods. Non-electric driving aids, such as plastic paddles, sorting sticks, flags or streamers (affixed to long handles) should be used to quietly guide and turn animals. When cattle continuously balk, cattle handlers should investigate and correct the reason rather than resort to overuse of electric prods.


Under desirable conditions, 90% or more of cattle should flow through cattle handling systems without the use of electric prods.

When cattle prods must be used, avoid contact with sensitive areas including the eyes, rectum, genitalia and udder.

Driving aids powered by AC current should never be used unless manufactured and labeled specifically for that purpose.

ome cattle are naturally more prone to vocalize, but if more than % of cattle vocalize (after being squeezed but prior to procedures being performed) it may be an indication that chute operation should be evaluated.

If more than % of cattle jump or run out of the chute there should be a review of the situation and questions asked such as is this a result from cattle temperament or prior handling issue, was the chute operating properly, etc.

Properly trained dogs can be effective and humane tools for cattle handling. Insure that barking or impeding cattle flow is minimized.

Cattle handling facilities can be evaluated using the BQA Assessment tools provided at bqa.org


MARKETING CATTLEThe overwhelming majority of cattle are marketed in good health and physical condition. Compromised cattle should not enter intermediate marketing channels because of animal welfare concerns. Depending upon the severity of the condition, processing plant policy, and state or U DA regulations, cattle healthy enough to enter the food supply should be sold directly to a processing plant. Non-ambulatory animals should be humanely euthanized (see umane Euthanasia section).

TRANSPORTATION Knowingly inflicting physical injury or unnecessary pain on cattle when

loading, unloading or transporting animals is not acceptable. Cattle sorting and holding pens should allow handling without undue

stress, be located near the loading unloading facility and be suitable for herd size.

Provide properly designed and maintained loading facilities for easy and safe animal movement. Proper design of loading chutes as well as personnel that are knowledgeable of their proper use can assure the safety of both cattle and cattle handlers. amps and chutes should be strong and solid, provide non-slip footing, and have sides high enough to keep cattle from falling or jumping off. A ramp angle of degrees or less will improve cattle movement.

All vehicles used to transport cattle should provide for the safety of personnel and cattle during loading, transporting and unloading.


trictly adhere to safe load levels with regard to animal weight and space allocation.

Producers hauling cattle in farm and ranch trailers must ensure that adequate space is provided so that cattle have sufficient room to stand with little risk of being forced down because of overcrowding.

Cattle that are unable to withstand the rigors of transportation should not be shipped.

When the vehicle is not full, safely partition cattle into smaller areas to provide stability for the cattle and the vehicle.

No gap which would allow injury to an animal should exist between the ramp, its sides, and the vehicle.

Vehicle doors and internal gates should be sufficiently wide to permit cattle to pass through easily without bruising or injury.

Cattle should be loaded, unloaded, and moved through facilities with patience and as quietly as possible to reduce stress and injury.

NON-AMBULATORY (DOWNER) CATTLE Marketing cattle promptly before this issue occurs will promote better

quality of life for the animal and be more efficient for the operation. A prompt diagnosis should be made to determine whether the animal

should be humanely euthanized or receive additional care. Provide adequate feed and water to non-ambulatory cattle at least

once daily. Move downer animals very carefully to avoid compromising animal

welfare. Acceptable methods of transporting downers include a sled, low-boy trailer or in the bucket of a loader. Dragging downer animals is unacceptable. ikewise, animals should not be lifted with chains onto transportation conveyances. Animals should not be scooped into a frontloader bucket, but rather should be humanely rolled into the bucket by caretakers.

When treatment is attempted, cattle unable to sit up unaided (i.e. lie flat on their side) and which refuse to eat or drink should be humanely euthanized within -3 hours of initial onset.

Even though signs of a more favorable prognosis may exist, cattle that are non-ambulatory must not be sent to a livestock market or to a processing facility.


HUMANE EUTHANASIAEuthanasia is humane death occurring without pain and suffering, it should be utilized when an animal’s condition is such that additional treatment options will not be effective. The decision to euthanize an animal should consider the animal’s welfare. The producer will most likely perform on-farm euthanasia because a veterinarian may not be immediately available to perform the service. Persons who perform this task must be technically proficient and have an understanding of the relevant anatomical landmarks and the protocols used for humane euthanasia of animals. When euthanasia is necessary, an excellent reference is the BQA Euthanasia of Cattle and Calves guidelines.

easons for euthanasia include Fractures of the legs, hip or spine that are not repairable and result in

immobility or inability to stand Emergency medical conditions that result in excruciating pain that cannot

be relieved by treatment Animals that are too weak to be transported due to debilitation from

disease or injury Paralysis from traumatic injuries or disease that result in immobility Disease conditions where no effective treatment is known, prognosis is

terminal, or a significant threat to human health is present.

Methods of Euthanasia in CattleAcceptable methods for conducting euthanasia in cattle include gunshot and penetrating captive bolt with a secondary step to insure death.

Firearms for Conducting Euthanasia in Cattleunshot is the most common method used for on-farm euthanasia of cattle.

Effectiveness depends upon selection of the appropriate caliber of firearm, type of bullet or shot shell, and accuracy of aim.

AnimalFirearm

Handgun Rifle Shotgun

Calves .3 to . caliberolid-point bullet

. caliber or largerolid-point bullet

. 0 to gauge- birdshot or slug

Adult .3 to . caliberolid-point bullet

. magnum or higher caliber1

olid-point bullet

0 to gauge- birdshot or slug

(within 3 feet)

1 .22 LR is discouraged for use in euthanasia of adult cattle because it lacks sufficient ballistic energy to yield consistent results. Higher caliber rifles should be avoided as bullets may exit the body and place by-standers in danger.


Penetrating Captive Bolt for Conducting Euthanasia of CattleCaptive bolt guns are designed to cause damage to the brain sufficient to cause an immediate loss of consciousness. owever, death is not certain in all cases. Therefore use of penetrating captive bolt should be followed with a secondary step to assure death. Methods used to assure death include a second or third shot if necessary, exsanguination (bleeding out), or use of a pithing rod.

Anatomical LandmarksCurrent information for adult cattle and calves indicates that the point of entry of the projectile should be at (or slightly above) the intersection of two imaginary lines, each drawn from the outside corner of the eye to the center of the base of the opposite horn. If a firearm is used it should be used within 3 feet of the target when possible and positioned so that the muzzle is perpendicular to the skull to avoid ricochet. When using penetrating captive bolt, operators are advised to restrain the head so that the captive boltmay be held flush with the skull.


Indications of UnconsciousnessWhen conducting euthanasia procedures one should always observe animals for the following behaviors

Animal collapses immediately when shot and makes no attempt to right itself Body and muscles become rigid immediately upon collapse followed by

relaxation of the body, brief tetanic spasms and eventually uncoordinated hind limb movements

An absence of vocalization An absence of eye reflexes and eyelids remain open facing straight

forward Immediate and sustained cessation of rhythmic breathing

These signs should be observed and monitored in all animals for which euthanasia procedures have been applied. Animals that attempt to right themselves, vocalize, blink with their eyes or begin rhythmic breathing are likely returning to a conscious state. In these cases one should immediately recheck the anatomical site used and re-shoot or re-apply the captive bolt.Confirmation of Death Criteria to be used for confirmation of death include lack of pulse, breathing, lack of corneal reflex, response to firm toe pinch (as with a hoof tester), failure to detect hear respiratory sounds or heart beat by use of a stethoscope, graying of the mucous membranes, and rigor mortis. None of these signs alone, with exception of rigor mortis, confirms death.

echecking of the animal for these parameters after a period of 0 minutes is a very useful method for confirmation of death.


HEAT STRESS PROCEDURES During periods of high heat and humidity and little wind, actions should

be taken to minimize the effects of heat stress as cattle are processed and managed.

Provide adequate water. If possible, avoid handling cattle when the risk of heat stress is high.

The final decision must consider temperature, humidity, wind speed, phenotype and cattle acclimation. If cattle must be handled, a general rule is to work them before the Temperature umidity Index (T I) reaches

, if possible. As an example, when the temperature is 9 o F and the humidity is 30%, the T I is 3. At a constant temperature, the T I increases as the relative humidity increases. Each one mile per hour increase in wind speed decreases the T I by approximately one point.

Work cattle more prone to heat stress first, earlier in the day or later if conditions moderate. For example, larger cattle should be processed during periods of lower T I.

imit the time cattle spend in handling facilities where heat stress may be more significant.

eat management tools, such as shades and sprinklers, should be considered if sufficient natural shade is not available.

PASTURE CATTLE HEAT STRESS PROCEDURES During summer, the T I in parts of the United tates can be high. Breeding programs should consider cattle’s heat tolerance and ability to

adapt to their regional environment. Trees are abundant on most farms and ranches, providing natural shade

and relief from heat. Cattle instinctively use shade and ponds for cooling when the T I is high.

30 35 40 45 50 55 60 65 70 75 80 85100 84 85 86 87 88 90 91 92 93 94 95 97

98 83 84 85 86 87 88 89 90 91 93 94 9596 81 82 83 85 86 87 88 89 90 91 92 9394 80 81 82 83 84 85 86 87 88 89 90 9192 79 80 81 82 83 84 85 85 86 87 88 8990 78 79 79 80 81 82 83 84 85 86 86 8788 76 77 78 79 80 81 81 82 83 84 85 8686 75 76 77 78 78 79 80 81 81 82 83 8484 74 75 75 76 77 78 78 79 80 80 81 8282 73 73 74 75 75 76 77 77 78 79 79 8080 72 72 73 73 74 75 75 76 76 77 78 7878 70 71 71 72 73 73 74 74 75 75 76 7676 69 70 70 71 71 72 72 73 73 74 74 75

Tem

pera

ture

(⁰F)

Temperature Humidity Index (THI)

Relative Humidity (%)

Beef Cattle Temperature Humidity Index

Normal <75 Alert 75-78 Danger 79-83 Emergency >84


When heat stress is extreme: Ensure adequate drinking water is available. Move or process cattle during the cooler part of the day. eat management tools, such as shades and sprinklers, should be

considered if sufficient natural shade is not available.

COLD STRESS PROCEDURES Cattle exposed to cold require more energy for maintenance, and performance will be reduced if action is not taken to provide for it. ome suggestions for reducing winter stress and maintaining production in cold weather are

Adjust feed and energy rations to match performance requirements when cattle reach low critical temperature.

Provide wind breaks and shelters to reduce wind, moisture, and mud. Construct feedlots and buildings in a manner that reduces winter stress

due to temperature and moisture. Provide bedding in severe conditions to allow cattle to lie down without

direct contact with frozen ground.Cattle will voluntarily seek protection from severe weather conditions if it is available. Modest protection by either natural or manmade structures can greatly reduce effects of extreme cold by allowing exposure to be intermittent rather than continuous.

Low CriticalTemperature

High CriticalTemperature

Intake

Gain

Maintenance

TNZ

Cold Hot

Effective Temperature

Effect of temperature on rate of feed intake, maintenance energy requirement, and gain.Source: Ames (1980).

Kilo

calo

ries

Estimated Low Critical Temperatures for Beef Cattle

Coat Description Low Critical Temperature

Summer coat or wet 59oFFall coat 45oFWinter coat 32oFHeavy winter coat 18oF


TRAINING AND EDUCATION Management practices should be informally assessed every day to ensure that animal welfare is not compromised. egardless, producers are encouraged to implement a system to verify efforts directed towards animal care and handling. This can be accomplished by

Establishing a network of resources on cattle care Following the Cattle Care and Handling Guidelines ecord training and education activities Conducting self-audits or external audits of animal care and handling

procedures ○ elf-assessment guides are available online at bqa.org

BQA training and certification programs ○ For more information go to bqa.org

Informal self-reviews should be periodically conducted by those involved with cattle feeding and care.

Training of those who handle cattle should include: An understanding of the animal’s point of balance and flight-zone Avoiding sudden movements, loud noises or other actions that may

frighten cattle Proper handling of aggressive easily excited cattle to ensure the welfare

of the cattle and safety of cattle handlers Proper use of handling and restraining devices ecognizing early signs of distress and disease ow to properly diagnose common illnesses and provide proper care udicious use of animal health products and how to responsibly perform

routine animal health procedures ecognizing signs associated with extreme weather stress and how to

respond with appropriate actions Basic feeding nutritional management of beef cattle

SELF EVALUATIONelf-evaluation is critical to continuous improvement. Producers are

encouraged to utilize the BQA elf Assessments most relevant to their operation. elf Assessment guides can be found online at www.bqa.org.


CONTACTS

Name ________________________ Phone _________________________________

Email _________________________________

Name ________________________ Phone _________________________________

Email _________________________________

Name ________________________ Phone _________________________________

Email _________________________________

Name ________________________ Phone _________________________________

Email _________________________________

Name ________________________ Phone _________________________________

Email _________________________________

Name ________________________ Phone _________________________________

Email _________________________________

Name ________________________ Phone _________________________________

Email _________________________________

Name ________________________ Phone _________________________________

Email _________________________________

Name ________________________ Phone _________________________________

Email _________________________________

Name ________________________ Phone _________________________________

Email _________________________________

Name ________________________ Phone _________________________________

Email _________________________________

Your Beef Checkoff Dollar — From Investment

to Results

1

Massachusetts, New Hampshire and Rhode Island — and all importeProducers in the six states with no beef councils — Alaska, Connecticut, Maine,

rs.2States may invest a portion of their 50 cents in national programs through the Federation of State Beef Councils.

3The Beef Promotion Operating Committee has 10 members from the Cattlemen’s Beef

Committee must contract with national industry-governed organizations to administer checkoff programs. Some of the primary contractors include National Cattlemen’s Beef Association (NCBA), American National CattleWomen (ANCW), the U.S. Meat Export Federation (USMEF), National Livestock Producers Association (NLPA) and the Meat Importers Council of America (MICA).

$1/hd invested every time an animal is sold

Boards made up of producers responsible for watching over

your investment

The programs you invest in

50¢

State Beef Council Collects Dollar

Beef • Dairy • Veal Producers pay $1/head

Promoting,Researching,Educating,

Safeguarding

Producers with no state beef councils1, and all importers pay $1/head or equivalent

Cattlemen’s Beef Board

Beef Promotion Operating

Committee3

Federation of State Beef Councils2

50¢

NationalPrograms

State Programs

For more information visit:www.bqa.org

[email protected]. 9 .030

9 0 East Nichols Avenue Centennial, Colorado 0

CATTLE CARE & HANDLING GUIDELINES - Nebraska Cattle Care & Handling Guideline… · CATTLE CARE & HANDLING GUIDELINES 7 DISEASE PREVENTION, HEALTH CARE, AND CATTLE MANAGEMENT PRACTICES

Documents