CMI RII Release 3.2 Functional Overview CATIA Teamcenter Interface RII
CMI RII Release 3.2 CMI Release 8.9 CMI Release 8.9 CMI Release 8.9 CMI Release 8.9 CMI Release 8.9 CMI Release 8.9 CMI Release 8.9
Functional Overview
CATIA Teamcenter Interface RII
ii CMI RII Releases – Functional Overview
Copyright
© 1999, 2009, 2012 T-Systems International GmbH.
All rights reserved. Printed in Germany.
Contact
T-Systems International GmbH PDC PLM Fasanenweg 5 70771 Leinfelden-Echterdingen Germany
http://www.cmi-support.com
+49-711-972-40304 +49-711-972-95975 mail : [email protected]
Document History
Version Date
1.1 February 2009
1.2 March 2009
2.0 July 2009
2.1 October 2009
2.2 April 2010
2.3 November 2010
3.0 April 2011
3.1 November 2011
3.2 April 2012
This edition obsoletes all previous editions.
Trademarks
CATIA is a registered trademark of Dassault Systèmes.
Metaphase is a registered trademark of Metaphase Technology, Inc.
Teamcenter is a registered trademark of Siemens PLM Corporation.
Names of other products mentioned in this manual are used only for identification purpose and may be trademarks of their companies.
CMI RII Releases – Functional Overview iii
Preface
About this Document
This document provides an overview about the functional enhancements of the current CMI RII release. A history of the functional enhancements of previous releases is also provided.
Related Documents
The following manuals contain information about installation, usage and customization of the CATIA Teamcenter Interface:
Manual Title Version
CATIA Teamcenter Interface RII Installation Manual 3.2 CATIA Teamcenter Interface RII User Manual 3.2 CATIA Teamcenter Interface RII Customizing Manual 3.2
Your Comments are Welcome
Please feel free to tell us your opinion; we are always interested in improving our publications. Mail your comments to:
T-Systems International GmbH PDC PLM Fasanenweg 5 70771 Leinfelden-Echterdingen Germany
E-mail: [email protected]
CMI RII Releases – Functional Overview v
Table of Contents
CMI RII VERSION 3.2......................................................................................................... 1
VISUALIZATION GEOMETRIES .............................................................................................. 1 CATANALYSIS SUPPORT .................................................................................................... 1 SINGLE MODEL EXPAND ...................................................................................................... 2 USE BOM PARTS IN CMIARCHIVES .................................................................................... 3 VOLUME/NEIGHBOURHOOD SEARCH IN CMI RII APPLICATION .............................................. 4 INSERT TO CATIA IN MY TEAMCENTER APPLICATION ........................................................... 4 MINIMIZE CATPRODUCT UPDATES...................................................................................... 4
CMI RII VERSION 3.1......................................................................................................... 5
START PART FROM TEAMCENTER ....................................................................................... 5 USE OF CATSCRIPT MACROS IN CATALOG ......................................................................... 6 SUPPORT OF CGM TYPE FILES ........................................................................................... 7 CUSTOMIZABLE NAMING SCHEMES FOR EXPORT .................................................................. 7 VOLUME/NEIGHBOURHOOD SEARCH IN PSE ....................................................................... 8
Neighbourhood Search: ............................................................................................................ 8 Volume Search: ......................................................................................................................... 9
ENHANCED WINDOW MANAGEMENT WITH WINDOWS OS ................................................... 10 ZERO QUANTITY SUPPORT ............................................................................................... 10 CHECKOUT ITEM REVISION AFTER CREATE ....................................................................... 11 CREATE ITEM FOR CATALOG ............................................................................................ 11 DERIVED FILES FOR CATDRAWING ................................................................................... 11 CMI INFO LIST VIEW ENHANCEMENT .................................................................................. 11 MULTISELECTION RECONNECT ......................................................................................... 12 CREATEITEM FORMDEFINITION FOR ITEMTYPES ................................................................ 13 COMPONENT HANDLING ................................................................................................... 13
CMI RII VERSION 3.0....................................................................................................... 15
NAME MAPPING OF EXTERNAL DATA ................................................................................. 15 Import – Synchronize with mapping file ................................................................................. 15 Export – Export Structure to Folder ....................................................................................... 15 Reimport – Reconnect with name mapping ............................................................................. 16
COPY STRUCTURE FACILITY ............................................................................................. 16 CMI CONTEXTUAL MENU IN CATIA .................................................................................. 16 CATIA VERSION HANDLING .............................................................................................. 17 CONFIGURABLE NEWSTUFF FOLDER ................................................................................. 18 DATASET TYPES FOR GEOMETRY ...................................................................................... 18 CHECK IN/CHECK OUT DIALOG ENHANCEMENT ................................................................. 19 USE LATEST ITEMREVISION IN CATALOGS ......................................................................... 19 USE CATIA FILENAME/PARTNUMBER ............................................................................... 19 USE PACK BOM LINE ...................................................................................................... 19
CMI RII VERSION 2.3....................................................................................................... 21
NAMING CONVENTION ...................................................................................................... 21 CMI RII FUNCTIONALITY IN SEVERAL APPLICATIONS ........................................................... 21 SELECT ITEM TYPE .......................................................................................................... 21 CREATE ITEM DIALOG WITH FORMS ................................................................................... 22 REMEMBER ATTRIBUTES .................................................................................................. 23 ENHANCED SUPPORT FOR READ MODE FROM CATIA ........................................................ 24 CATPROCESS SUPPORT ................................................................................................. 25
CMI RII VERSION 2.2....................................................................................................... 27
CMIARCHIVE SUPPORT .................................................................................................... 27 DESIGN TABLE SUPPORT .................................................................................................. 27 DRAWING FRAME SUPPORT .............................................................................................. 28 PERFORMANCE IMPROVEMENTS ....................................................................................... 28
vi CMI RII Releases – Functional Overview
CMI RII VERSION 2.1....................................................................................................... 29
DATASET PSEUDO REVISE ................................................................................................ 29 CREATE DIALOG .............................................................................................................. 29
CMI RII VERSION 2.0....................................................................................................... 31
TEAMCENTER 8 SUPPORT ................................................................................................ 31 ALTERNATE REPRESENTATIONS ....................................................................................... 31 MODIFIED ON ASSEMBLY .................................................................................................. 31 CATIA V4 SUPPORT ....................................................................................................... 31 INSERT FROM TEAMCENTER ............................................................................................. 32 TRANSLATION SERVICE SUPPORT .................................................................................... 32 CHECK IN/CHECK OUT ..................................................................................................... 32
CMI RII VERSION 1.2....................................................................................................... 33
SUPPORT FOR RELEASED CACHE CGR FILES ...................................................................... 33 SUPPORT FOR AUXILIARY GEOMETRY FILES ....................................................................... 33 RECONNECT WITH TEAMCENTER ...................................................................................... 33 INSERT FROM TEAMCENTER ............................................................................................. 34 SYNCHRONIZE – DIALOG AT PART NUMBER CONFLICT ....................................................... 35 SHOW DIALOGS IN CREATE PROCESS ............................................................................... 35 CREATE DRAWING: AUTOMATIC ATTACH OF CATDRAWING TO THE ITEM REVISION ............. 35
CMI RII VERSION 1.1....................................................................................................... 37
SEND TO CATIA FROM PSE APPLICATION ....................................................................... 37 SEND TO CATIA FROM MY TEAMCENTER APPLICATION .................................................... 37 LINK TO NEWSTUFF FOLDER ............................................................................................ 38 PERFORMANCE OPTIMIZATION .......................................................................................... 38
CMI RII Releases – Functional Overview vii
Figures
FIGURE 1: VISUALIZATION MODEL REPRESENTS THE FIXEDPARTS STRUCTURE. ................... 1 FIGURE 2: CATANALYSIS STORED IN A DATASET ............................................................... 2 FIGURE 3: CATANALYSIS RELATED SETTINGS AND CONTEXT MENUS ................................... 2 FIGURE 4: TEAMCENTER ITEMS ASSEMBLED IN CMIARCHIVE CONTENT ............................... 3 FIGURE 5: THE CMI RII CREATE DIALOG FOR ITEM AND DATASET WITH TEMPLATE ............... 5 FIGURE 6: THE CMI RII CREATE DIALOG FOR DATASET WITH TEMPLATE .............................. 6 FIGURE 7: CATSCRIPT QUERY IN TEAMCENTER ................................................................. 6 FIGURE 8: CATSCRIPT INSERTED IN THE CATIA CATALOG ................................................. 6 FIGURE 9: CMI RII PREFERENCES FOR CGM SUPPORT ..................................................... 7 FIGURE 10: NAMING SCHEMA DIALOG ................................................................................ 8 FIGURE 11: NEIGHBOURHOOD SEARCH ............................................................................. 8 FIGURE 12: VOLUME DEFINITION DIALOG ........................................................................... 9 FIGURE 13: CMI RII PREFERENCES PANEL ........................................................................ 9 FIGURE 14: SELECTED RESULT LINES IN STRUCTURE MANAGER ....................................... 10 FIGURE 15: INFO LIST ..................................................................................................... 11 FIGURE 16: RECONNECT DIALOG .................................................................................... 12 FIGURE 17: THE CMI RII SYNCHRONIZE DIALOG IN CATIA V5 ......................................... 15 FIGURE 18: THE CMI RII CONTEXT MENU IN CATIA V5 ................................................... 15 FIGURE 19: THE CMI RII EXPORT STRUCTURE TO FOLDER COMMAND IN CATIA V5 .......... 16 FIGURE 20: THE CMI RII CONTEXT MENU IN CATIA V5 ................................................... 16 FIGURE 21: THE CMI RII CONTEXT MENU IN CATIA V5 ................................................... 17 FIGURE 22: WARNING IN CATIA V5 ................................................................................ 17 FIGURE 23: THE CMI RII APPLICATION OPTIONS DIALOG .................................................. 18 FIGURE 24: CHECK IN/CHECK OUT DIALOG ...................................................................... 19 FIGURE 25: CREATE ITEM DIALOG WITH SELECT ITEM TYPE BUTTON ................................. 22 FIGURE 26: SELECT ITEM TYPE DIALOG ........................................................................... 22 FIGURE 27: FORMS IN THE CREATE ITEM DIALOG .............................................................. 23 FIGURE 28: CREATE ITEM DIALOG WITH REMEMBER ATTRIBUTES CHECK BOX .................... 24 FIGURE 29: CMI RII OPTIONS ......................................................................................... 25
CMI RII Releases – Functional Overview 1
CMI RII VERSION 3.2
New Functionalities
Visualization Geometries
CMI RII now supports Visualization geometries which can visualize substructures in CATIA.
The Build Visualization command in CATIA builds up or updates a visualization file from a selected product and stores the visualization under the selected item. This visualization file can then be created/updated with the CMI Synchronize command.
In the CMI RII Application a structure can be multiple level expanded with the Expand for Visualization command in the context menu. This command expands the structure, but skips the child structure expand when a visualization is found.
Figure 1: Visualization model represents the FixedParts structure.
The expanded structure can then be sent to CATIA and the visualization file visualizes the child structure.
CATAnalysis support
CATAnalysis files can now be stored in Teamcenter as a dataset, without need for a CMIArchive. The Analysis is attached to the Teamcenter Item Revision of the CATProduct or CATPart that it is referencing. It is handled in a similar way as a CATDrawing – normally the CATAnalysis files are not loaded; it is loaded if it is expanded in the CMI RII application.
2 CMI RII Releases – Functional Overview
Unlike with a CATDrawing, the assemblies referenced by the CATAnalysis are updated if you use the Synchronize Teamcenter function in the Analysis Workshop.
Figure 2: CATAnalysis stored in a Dataset
A new preference “Send analysis files to CATIA?” has been added to the CMI RII Options in the Rich Client. As with a CATDrawing, you would usually keep this as unchecked, and users would expand Analysis files explicitly, with the Expand Analysis context command provided for Item Revisions in the CMI RII application.
Figure 3: CATAnalysis related settings and context menus
Configuration
Set the configuration variable CMI_STORE_ANALYSIS=ON in the CATIA V5 environment
to store the Analysis as a Dataset. Otherwise the prior functionality to store the Analysis as a CMIArchive can be applied.
Single model expand
CATDrawing, CATAnalysis and cgm models can be separately expanded in the CMI RII application. If the “Send drawings to CATIA?”, “Send cgms to CATIA?” or “Send analysis files to CATIA?” preference is not selected, these dataset types can be expanded in the
CMI RII Releases – Functional Overview 3
CMI RII application window with the corresponding context menu. The expanded models can then be sent to CATIA.
Use BOM Parts in CMIArchives
CMIArchives can be used to store CATIA product structures that do not have a corresponding Teamcenter product structure.
The CMIArchive functionality was enhanced so that Items from Teamcenter can be built into CATProducts that are just part of a CMIArchive and do not have a Teamcenter Item. In the Teamcenter database, these Items are built directly into the assembly that attaches the CMIArchive.
Archives that reference Items are updated using the Synchronize Teamcenter function. When an Archive is newly created with Creates/Attaches an Archive, it must not reference BOM Parts.
Figure 4: Teamcenter Items assembled in CMIArchive content
Configuration
Set CMI_ARCHIVE_BOM_CHILDREN=ON in the CATIA V5 environment to allow
synchronization of Archives to contain Teamcenter parts.
Without this setting, Archives containing Teamcenter Item Revisions cannot be saved (as before).
4 CMI RII Releases – Functional Overview
Changed/enhanced Functionalities
Volume/Neighbourhood Search in CMI RII application
The Volume/Neighbourhood Search functionality is now available in the CMI RII Application.
Insert to CATIA in My Teamcenter application
The Insert to CATIA command is now also available in the My Teamcenter Application. After starting the Insert From Teamcenter command in CATIA it is now possible to send geometry files (BOM geometries and auxiliary geometries) from the My Teamcenter application to CATIA.
Minimize CATProduct updates
In prior releases of CMI RII it could often be observed that CATProducts needed an update even if only the geometry of a CATPart had been changed. We have been able to minimize this effect for CMI RII 3.2. CATProducts will still need to be updated if they are shown as modified in the CATIA save management, however.
CMI RII Releases – Functional Overview 5
CMI RII VERSION 3.1
New Functionalities
Start Part from Teamcenter
Now it is possible to create new CATIA files for a BOM CATPart, an AUX CATPart, a CATProduct, and a CATDrawing from Teamcenter. The template datasets are available in Teamcenter and their referenced CATIA files are used for the new CATIA file.
There is a new dialog to create an item with its dataset. In this dialog the template dataset can be selected (see Figure 5).
Figure 5: The CMI RII Create dialog for item and dataset with template
There is a new create dataset dialog. In this dialog the template dataset can be selected (see Figure 6).
6 CMI RII Releases – Functional Overview
Figure 6: The CMI RII Create dialog for dataset with template
Use of CATScript Macros in Catalog
CATScript files can now be registered in Teamcenter with the CATIA Script dataset CMI2Script.
New Insert CATScript from Teamcenter command allows insertion of CATScripts from Teamcenter into Teamcenter managed catalogs.
Figure 7: CATScript query in Teamcenter
Figure 8: CATScript inserted in the CATIA catalog
Configuration
Set CMI_ENABLE_CMICATALOGINSERTSCRIPTCMD=ON in the CATIA environment.
CMI RII Releases – Functional Overview 7
Support of CGM type files
CMI RII now supports the CGM: Computer Graphics Metafile format for basic Read and Update operations with CATIA V5.
CGM-Files are handled in the same manner as CATDrawings.
The support of sending CGM files to CATIA can be configured in the CMI RII preferences (see Figure 9).
Figure 9: CMI RII Preferences for CGM support
Configuration
Set CMI_ENABLE_CGM=ON in the CATIA environment. This will enable the Update, Synchronize, Save As and Save for Doc commands if a CGM is the active document in CATIA.
Customizable naming schemes for Export
When CATIA files are sent to a partner, it is often necessary to enrich the file names with information – like e.g. appending the revision number. The Export functionality has been enhanced with a default implementation to customize the part number and the file name when files are exported.
One of the following naming schemas can be selected (see Figure 10):
Use external names: no changes
FileName -> FileName_Revision: the revision of the object is added to the given file name
PartNumer -> PartNumber_Revision: the revision of the object is added to the given part number
FileName -> FileName_Revision and PartNumber -> PartNumber_Revision: both values are changed; see above
8 CMI RII Releases – Functional Overview
Figure 10: Naming Schema dialog
Configuration
Set CMI_EXPORT_CUSTOMIZE_NAMING=ON in the CATIA environment to enable this functionality.
In order to switch on the dialog of the default implementation you have to set the Teamcenter preference CMIUseNamingSchemaDialog to “1”.
Volume/Neighbourhood Search in PSE
CMI provides bounding box information when saving geometry files to Teamcenter. This information is stored in Teamcenter Forms inside the Datasets.
The search criteria can be defined in two ways:
Neighbourhood Search
Volume Search
Neighbourhood Search:
Select one or more lines in the Structure Manager Application. The bounding boxes of the selected lines (see Figure 17) are used as search criteria.
Figure 11: Neighbourhood Search
CMI RII Releases – Functional Overview 9
Volume Search:
Select a volume by defining 2 points which define a cuboid in the global coordinate system as search criteria (see Figure 12).
Figure 12: Volume definition Dialog
The DMU clearance can be set in the CMI RII options panel (see Figure 13).
Figure 13: CMI RII preferences panel
After defining the search criteria the structure is searched for bounding box information which is stored in the following dataset types:
CMI2Part, CMI2Model, CMI2Cgr, CMI2Rep,
CMI2AuxPart, CMI2AuxModel, CMI2AuxCgr, and CMI2AuxRep, CMIArchive
10 CMI RII Releases – Functional Overview
The Volume Search and the Neighbourhood Search command computes the result and selects the lines in the Structure Manager. This result can then be sent to CATIA V5 using the new command “Send selected To CATIA” (see Figure 14).
Figure 14: Selected result lines in Structure Manager
Configuration
To store the bounding boxes in Teamcenter you have to set the following CATIA Environment:
set CMI_CALC_BBOX=ON
set CMI_BOUNDING_BOX_EXCLUDE_HIDDEN=ON (optional)
Enhanced Window Management with Windows OS
Now the CATIA application window comes to foreground without user action.
Zero Quantity support
The used items with quantity = 0 will not be loaded from Teamcenter to CATIA V5.
In the CMI RII application the used items with quantity = 0 will not be expanded.
Configuration
Set the CMI RII preference “CMIDoNotLoadZeroQuantity” to “1” in the Teamcenter environment.
CMI RII Releases – Functional Overview 11
CheckOut Item Revision after Create
The standard Teamcenter preference “CheckoutOnCreatePref” is used in the create process of CMI RII for item revisions.
Configuration
Set the standard preference “CheckoutOnCreatePref” to “1” in the Teamcenter environment.
Create item for Catalog
Now it is possible to create an item object for a new catalog in Teamcenter. The dataset with the catalog will be related to this item.
Configuration
Set the CMI RII preference “CMICreateItemForCatalog” to “1” in the Teamcenter environment.
Derived files for CATDrawing
CATIA V5 can write derived files for a CATDrawing in several formats (e.g. pdf and tif). These derived files will be stored in an own dataset with the same name like the drawing dataset.
When the drawing dataset is related to an item then the datasets for the derived files will be related to this item, too.
Configuration
Set the CMI RII preference “CMIDrawingFileFormatsList” in the Teamcenter environment. This list of formats supports the values “pdf” and “tif”.
CMI Info list view enhancement
The Multiple Objects view in the Info dialog is now available even if only a single node is selected in CATIA (see Figure 15).
Figure 15: Info List
12 CMI RII Releases – Functional Overview
Multiselection Reconnect
In the Reconnect dialog (see Figure 16) you can now apply the Synchronize configuration options for multiple selected items. This facilitates e.g. to mark an assembly with all its subassemblies as New, to make a deep copy of an assembly structure.
Figure 16: Reconnect dialog
CMI RII Releases – Functional Overview 13
Changed/enhanced Functionalities
CreateItem FormDefinition for ItemTypes
In the create dialog for item and item revision it is possible to fill several forms with attributes. These forms will be created or used if they already exist. This existing functionality is enhanced in order to handle the forms based on the item type and item revision type.
Configuration
Set the CMI RII preferences “CMICreateItemItemFormList“ and “CMICreateItemItemRevisionFormList” in the Teamcenter environment. See CATIA Teamcenter Interface RII Customizing Manual for details.
Component handling
In general, a CATIA component – that is not a CATProduct - cannot be synchronized to Teamcenter, since the component is local to its CATProduct and cannot be mapped to a Part in the BOM (as Parts are required to be reusable in different Assemblies).
However, CATIA components can be skipped or ignored by CMI based on a configuration, to support specific use cases. CMI expands the possible use cases with new configuration options:
Skip Component based on the type of feature (e. g. Wire Bundle)
Identify Node type based on its instance name, rather than part number
Option to ignore all components that have no children
Configuration
In the CMI Configuration File in the section “ConfigurableBehaviors” a node can have the tag “ProductType”, e.g.:
<ConfigurableBehavior UniqueID="t0">
<BehaviorType>EmbeddedNodeBehavior</BehaviorType>
<ProductType>ElecWireGroup</ProductType>
<Behavior>SkipNode</Behavior>
</ConfigurableBehavior>
If the above configuration is set, an embedded CATProduct of the type ElecWireGroup will be skipped in the CMI Synchronize.
To facilitate configuration, the feature type of components is shown in the CMI Info dialog.
To ignore or skip component nodes based on their instance name the tag InstanceNamePrefix is introduced:
<ConfigurableBehavior UniqueID = "EmbeddedNode_IgnInst">
<BehaviorType>EmbeddedNodeBehavior</BehaviorType>
<PartNumberPrefix></PartNumberPrefix>
<InstanceNamePrefix>XY_</InstanceNamePrefix>
<Behavior>IgnoreNode</Behavior>
</ConfigurableBehavior>
This example will ignore components where the instance name begins with “XY_”.
To generally ignore – and hence admit - components that do not have child nodes, set the variable CMI_IGNORE_EMBEDDED_LEAFNODE=ON in the CATIA environment.
CMI RII Releases – Functional Overview 15
CMI RII VERSION 3.0
New Functionalities
Name Mapping of external Data
A set of functional extensions allow to map CATIA data that exists both in the customers PDM system and at a partner site, but under different names.
Import – Synchronize with mapping file
The Synchronize dialog (see Figure 17) has been enhanced with an option to record or map original names for CATIA data that is stored in Teamcenter.
Figure 17: The CMI RII Synchronize dialog in CATIA V5
An XML mapping file is created and attached to the Top level assembly in Teamcenter of the new structure.
Figure 18: The CMI RII Context menu in CATIA V5
Export – Export Structure to Folder
A new Export Structure to folder function (see Figure 19) allows to export CATIA data that was loaded from Teamcenter to a specific folder. Original file names can be restored thanks to the mapping file.
16 CMI RII Releases – Functional Overview
Figure 19: The CMI RII Export structure to folder command in CATIA V5
Reimport – Reconnect with name mapping
In order to update files received from a partner with different naming the Reconnect function has been enhanced to use mapping files. Data can also be reconnected with Teamcenter going by user supplied names.
Figure 20: The CMI RII Context menu in CATIA V5
Copy Structure facility
Another enhancement of the Reconnect dialog allows to copy structures with or without subassemblies. CATProducts and CATParts originally opened from Teamcenter can be flagged as New.
Synchronize will then create new Teamcenter objects for these files. This also allows to create PDM items for the contents of an Archive.
CMI Contextual Menu in CATIA
Several CMI functions that correspond to a selected product have been added to the CATIA context menu. They become active depending on applicability, and appear only if the corresponding toolbar button is configured.
This feature can be disabled.
CMI RII Releases – Functional Overview 17
Figure 21: The CMI RII Context menu in CATIA V5
CATIA version handling
The information about the CATIA release, hot fix and service pack is stored Teamcenter.
While loading from Teamcenter to CATIA, the stored CATIA release is compared with the actual CATIA release. If the stored CATIA release is higher, the data are not loaded to CATIA and a warning message is shown (see Figure 22) in CATIA.
Figure 22: Warning in CATIA V5
18 CMI RII Releases – Functional Overview
Configurable Newstuff folder
In the CMI RII preferences dialog, the newstuff settings can be set. It can be defined for new Items and Datasets to which folder they should be linked:
The default Newstuff Folder will be used.
The folder is chosen by the user.
The newly created object should not be linked to a folder.
Figure 23: The CMI RII application options dialog
Figure 23 shows the relevant settings for the Configurable Newstuff folder in the CMI RII Options.
Dataset types for geometry
New Dataset types are available for the different geometry files in CATIA. CATPart’s, model’s, cgr’s, or representations can be created with their own Dataset Types.
CMI RII Releases – Functional Overview 19
Check In/Check Out Dialog enhancement
Figure 24: Check In/Check Out dialog
Additional columns can be configured in CATIA and the values for these attributes will be sent from Teamcenter. Details please see in the Configuration Manual. In Figure 24 the columns “Checked-Out By”, “Object String Dataset”, and “Object String Item Revision” are added by configuration.
Use Latest ItemRevision in catalogs
CMI can store the Item ID, not only the ItemRevision ID in CATCatalogs. Manage Catalogs opens always the latest item revision of the Item, and not a static revision If the Dynamic catalog support is enabled.
Use CATIA filename/Partnumber
When new Auxiliary (Non BOM) files are stored in Teamcenter, the File names from CATIA can be stored.
The part number from new Auxiliary (Non BOM) files from CATIA can be stored in Teamcenter and used for the Read command.
The part number from CATIA can be used for the Dataset naming for the Auxiliary (Non BOM) files.
Use Pack BOM Line
Use existing (for same PartNumber) Find No. in Teamcenter in the assembly for new instances.
When the Existing Find No Support is enabled, CMI RII will use existing Find No. for new Children with the same part number. So the Lines are packed in the Structure Manager Application in Teamcenter.
CMI RII Releases – Functional Overview 21
CMI RII VERSION 2.3
New Functionalities
Naming convention
The types and attributes have been renamed to the new naming convention of Teamcenter 8.3. The prefix is “CMI2”.
CMI RII functionality in several applications
The following functions are now available in the “Structure Manager”, the “Multi-Structure Manager”, and the “Manufacturing Process Planner” application:
Send To CATIA
Send DMU To CATIA
Temp To CATIA
Insert To CATIA
Cancel CATIA Action
Highlight in CATIA
Select Item Type
The item type in the create item dialog can be selected from a list of valid item types. This list can be defined in the preferences.
22 CMI RII Releases – Functional Overview
Figure 25: Create Item dialog with Select Item Type button
Figure 26: Select Item Type dialog
The select button is deactivated if there is only one item type available in the list.
Create item dialog with forms
It is possible to fill several forms for item and item revision in the create item dialog. They are displayed in the sections “Item Form Information” and “Item Revision Form Information” in the dialog.
CMI RII Releases – Functional Overview 23
Figure 27: Forms in the create item dialog
Remember Attributes
The attribute values – except basic information attributes – of the create item and the create dataset dialog can be stored depending on the item/dataset type. These stored attributes will be filled as default in the new create dialog for the same type.
24 CMI RII Releases – Functional Overview
Figure 28: Create Item dialog with Remember Attributes check box
Enhanced Support for Read mode from CATIA
A new Option is added to the CMI RII options.
With the “Read Mode for Read From CATIA” option the read modus for the Read command within the CATIA V5 command can be changed.
Use Standard Read Mode Send the visible (expanded) children to CATIA
Use DMU Read Mode Send the DMU marked (checked) children to CATIA
Use Automatic Read Mode Use DMURead Mode if the Viewer is active Use Standard Read Mode if the Viewer is not active.
CMI RII Releases – Functional Overview 25
Figure 29: CMI RII options
CATProcess Support
Support for the CATProcess CATIA V5 data type.
See User Manual: Handling Of CATProcess
CMI RII Releases – Functional Overview 27
CMI RII VERSION 2.2
New Functionalities
CMIArchive support
CMI RII supports the use of CMI Archives. A CMI Archive is a dataset in Teamcenter which contains a CATIA V5 structure. The structure has one root item which can be a CATProduct or a CATPart. If the root item is a CATProduct, it can contain more items of type CATIA V5 Component, CATIA V5 CATProduct or CATIA V5 CATPart.
The picture above shows on the left side the Teamcenter dataset and on the right side the example content in CATIA V5.
Design Table support
CATIA V5 Design Tables can be stored in Teamcenter. Both CSV and Excel files are supported. The Design Table dataset is linked to the Item Revision and to the CATPart. Design tables referenced by CATParts and CATProducts are supported.
Design tables are not stored by default because of performance considerations; also, you need a sound methodology if you allow the use of design tables in your methodology, since design tables have the power to change your product structures.
The Teamcenter administrator needs to set CMIWorkWithDesignTables to 1 in the Teamcenter preferences in order to enable the Design Table support.
28 CMI RII Releases – Functional Overview
The CATIA administrator needs to set CMI_USE_DTFORPRODUCT=ON in the CATIA environment in order to enable the support of Design Tables and CATProducts.
Drawing frame support
CMI RII can automatically update text fields in the Drawing title blocks with attributes from Teamcenter. This requires a configuration in Teamcenter.
CMI RII will update the Knowledgeware Parameters in the CATDrawing document. In CATIA the Knowledgeware Parameters can be defined in the CATDrawing object. With the Attribute Link command in CATIA these parameters can be connected to text fields in the CATDrawing.
With the CMIRead command the parameters are updated in the CATDrawing document in CATIA.
Performance improvements
Performance of the CMI RII was improved in several ways.
One improvement was the caching of CMI preferences. So the change of CMI preferences requires a Teamcenter Rich Client restart. The preference caching can be disabled by setting CMI_CACHE_PREFERENCES=OFF in the Teamcenter Environment.
CMI RII Releases – Functional Overview 29
CMI RII VERSION 2.1
New Functionalities
Dataset pseudo Revise
The CAD datasets can be pseudo revised with CMI RII. This is possible in the dialog shown above in CATIA V5 and with a CMI RII command in the Rich Client.
Create Dialog
CMI RII can be configured to display a create dialog for item and dataset. The attributes of the dialog are taken from the data model definition of the Business Modeler.
CMI RII Releases – Functional Overview 31
CMI RII VERSION 2.0
New Functionalities
Teamcenter 8 Support
CMI RII supports the new release of Teamcenter 8.
Alternate Representations
An Item Revision can be represented in CATIA by different 3D-geometries. An alternative geometry represents the Item Revision it belongs to in a specific state/usage or aspect of the part, e.g. MASTER, OPEN, FLYAWAY and ENVELOPE.
Alternate Representations (ALT-reps) are handled globally and do not depend on the occurrence/instance of the Item Revision.
In CMI RII, an Alternate Representations filter can be applied. The Filter is used to filter the datasets (all dataset types, handled in CMI RII), which should be send to CATIA.
This dataset filter is defined in CMI RII options. In the Teamcenter Preferences the Alternate Representation list is defined. The first entry is called the MASTER. The next are the alternate representations.
Modified on Assembly
In the standard case the physical (CAD) data of a product is defined by the configuration and effectivity (TVE) of the BOM structure. Though, often, the CAD data must be altered depending on where a specific part is used in the assembly structure. Examples are flexible parts like a bent hose or parts that become modified when applied in the manufacturing process, like cut bolts or holes in a standard plate.
Basically, the same Item Revision in the BOM can exist in different aspects in the physical world when it is assembled. The geometrical representation of an Item Revision (Component or Assembly) can alter depending on the design context that is defined by a higher assembly Item Revision. The positioning of Item Revision in-stances may alter too when “Modified On Assembly” (ModOn) geometries are used in an product structure.
The ModOn Assembly provides the necessary functionality to support the described scenarios.
CATIA V4 Support
CMI RII supports CATIA V4 as CAD client.
32 CMI RII Releases – Functional Overview
Insert from Teamcenter
The Insert from Teamcenter command allows the user to load a CMI structure under a selected product. This change of the product structure has to be updated separately.
Translation Service Support
When CMI RII updates or creates files in Teamcenter a Dispatcher Request is created in Teamcenter to translate the files in Teamcenter with the ETS of Teamcenter. The ETS of Teamcenter must be installed and configured correctly to translate the required File Datasets.
Check In/Check Out
It is possible to check in and check out the dataset in Teamcenter out of a dialog in CATIA V5. In the dialog there is shows which action is possible.
CMI RII Releases – Functional Overview 33
CMI RII VERSION 1.2
New Functionalities
Support for released cache cgr files
CMI RII supports the use of CGR files in the released cache of CATIA V5. For this purpose the CGR files of CATIA models are stored in Teamcenter. During To CATIA these CGR files are copied to the released cache instead of the CATIA models to the exchange map. In CATIA V5 the CGR files are loaded in visualization mode.
Support for auxiliary geometry files
The standard behaviour for CMI RII is that every object in CATIA will be represented by an item object in Teamcenter. Auxiliary geometric objects which are not relevant for the BOM (not represented by an item in Teamcenter) must be stored in Teamcenter under Item Revisions.
An “Auxiliary Dataset File” or AUX Dataset is a geometrical representation (CATPart, CATIA V4 model, …) that has a meaning for the design process but does not represent an Item Revision in the Bill of Material. An AUX Dataset file is referenced by a parent CATProduct that represents the Assembly Item Revision in CATIA. An AUX Dataset is an additional Dataset at this Assembly Item Revision. Multiple different AUX Dataset Files are possible at one Item Revision node.
Reconnect with Teamcenter
The Reconnect with Teamcenter command in CATIA V5 allows the user to open a CATIA structure and to find the corresponding objects in Teamcenter. The objects are identified on their Part Number and File Name. The user can decide which objects have to be queried in Teamcenter.
The status can be:
CMI-Unknown: CMI does not know this item at all. It would be created as a new Part in
Teamcenter.
34 CMI RII Releases – Functional Overview
CMI-Reference: CMI knows this item is in Teamcenter. But it appears that in
Teamcenter there is no instance known by the same instance name under the same parent item. Maybe it was deleted or is new. It would be created as a new Part instance in Teamcenter.
CMI-Instance: CMI knows this instance is in Teamcenter. It can be updated in
Teamcenter.
With clicking the “OK” button the user accepts the result of the reconnect action. The objects are in the modified state. When he clicks on the “Cancel” he keeps the objects as unknown.
Via Synchronize he can save the changes in Teamcenter.
Insert from Teamcenter
The Insert from Teamcenter command in CATIA V5 allows the user to load a CMI-structure under a selected product. He drops the assembly-structure he wants to use in CATIA V5 in the CMI RII application window and clicks Tools Insert To Catia or the icon.
The object will be inserted in the structure in CATIA V5.
The dropped part/structure is removed from the CMI RII application window after he sends it to CATIA.
Via Synchronize he can save the new Use-Relation in Teamcenter.
CMI RII Releases – Functional Overview 35
Synchronize – Dialog at Part Number Conflict
Teamcenter can be configured to use the CATIA part number while the synchronize process. This can cause a part number conflict. The user can decide how to continue: Cancel the process, give a new part number, or use an existing item in Teamcenter.
Show dialogs in Create Process
During the create process of an item it is possible to set the properties of the Master Form and the Revision Master Form.
Create Drawing: Automatic attach of CATDrawing to the Item Revision
The newly created CATDrawing with its dataset will be related to the referenced part object.
CMI RII Releases – Functional Overview 37
CMI RII VERSION 1.1
New Functionalities
Send To CATIA from PSE Application
New CMI – RII Menu is available in the PSE Application which allows the Send to Catia from the PSE Application.
If the PSE Application is Active in Teamcenter, a Read from Workbench Command from CATIA will read the data from the PSE Application window.
Send To CATIA from My Teamcenter Application
New CMI – RII Menu is available in the My Teamcenter Application which allows the Send to Catia from the My Teamcenter Application. Only CAT Drawings are now supported in the My Teamcenter Application.
38 CMI RII Releases – Functional Overview
Link to Newstuff Folder
New created Items are now linked to the users Newstuff Folder in My Teamcenter.
Performance optimization
Performance optimization for large structures in CATIA CMI Module.