CATERPILLAR MACHINE PRICE LIST 525D 525D WHEEL SKIDDER Ship Weight List Price LAGRANGE, GA, USA lbs At Factory Standard Equipment: ELECTRICAL 24-volt electrical system Alarm, back-up Alternator, 115-amp Batteries, maintenance free (2-1000CCA) Lighting system, halogen (4 total) Main disconnect switch with Diesel Exhaust Fluid (DEF) purge indicator light Starter, electric, heavy duty Starting and charging system Diagnostic connector Horn, warning OPERATOR ENVIRONMENT Power port, 12V Converter, 24V to 12V Beverage holders (2) Headliner with dome light Floormat, non permeable and removable Mirror, rear view Radio, AM/FM/CD/Sirius-Satellite Computerized Monitoring System Instrumentation Gauges: Engine coolant temperature Fuel level Diesel Exhaust Fluid (DEF) level Hydraulic oil temperature Engine Tachometer Torque converter oil temperature Instrumentation, Warning Indicators: Air filter restriction Autograb Brake oil pressure Differential locks Emissions system Engine Engine oil pressure Hydraulic lockout status Hydraulic filter bypass Lockup clutch Parking brake Primary steer pressure Starting aid System voltage Transmission Transmission filter bypass Winch freespool (if equipped) Work lights Instrumentation, Digital Data: Gear and direction Service hour meter Fault code and warning description Computerized diagnostics & monitoring: Engine fault code log Hydraulic system fault code log Machine fault code log Machine electronic component troubleshooting capability POWERTRAIN Engine, Cat C7 with ACERT Technology EPA/ARB Tier 4 Final and EU Stage IV Equivalent Engine with Cat Clean Emissions Module (CEM) Fuel priming pump, electric Fuel transfer pump, electric Fuel filters, inline, primary and secondary Air Precleaner, Turbine Air Cleaner, 2-stage Cooling, cross-flow system with stationary cores and swing out panel Stationary Cores Engine coolant Fuel Hydraulic Transmission Swing Out Panel Air to air aftercooler Air conditioner condenser Reversing cooling fan, hydraulically driven on demand Transmission, countershaft powershift (6F/3R) Lock-up torque converter Lubed for life driveline slipjoint and universal joints Axles, heavy duty Cat inboard planetary approved for odd sized dual tires up to 30.5-32 inner and 24.5-32 outer and single wide tires up to 73-44 with chains Differential locks, independent front and rear Four-wheel enclosed disc service brakes Parking brake, hydraulically released, spring applied Fuel tank, high capacity OTHER STANDARD EQUIPMENT Access panels, hinged or removable Articulation lock link Center Hitch, dual tapered roller bearing upper and lower Ecology drains (engine oil, engine coolant, hyd tank, fuel tank, axles, transmission) Fuel fill, ground level Supersedes Subject to change without notice Effective 21MAR2015 Printed in USA Caterpillar: Confidential Green US-A D U. S. DOLLAR CURRENCY 525D-001
61
Embed
CATERPILLAR MACHINE PRICE LIST 525D 525D WHEEL … group 19...CATERPILLAR MACHINE PRICE LIST 525D 525D WHEEL SKIDDER Ship Weight List Price LAGRANGE, GA, USA lbs At Factory OTHER STANDARD
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CATERPILLAR MACHINE PRICE LIST 525D525D WHEEL SKIDDER Ship Weight List PriceLAGRANGE, GA, USA lbs At Factory
Starter, electric, heavy dutyStarting and charging systemDiagnostic connectorHorn, warning
OPERATOR ENVIRONMENTPower port, 12VConverter, 24V to 12VBeverage holders (2)Headliner with dome lightFloormat, non permeable and removableMirror, rear viewRadio, AM/FM/CD/Sirius-SatelliteComputerized Monitoring System
Swing Out PanelAir to air aftercoolerAir conditioner condenser
Reversing cooling fan, hydraulicallydriven on demand
Transmission, countershaftpowershift (6F/3R)
Lock-up torque converterLubed for life driveline slipjoint anduniversal joints
Axles, heavy duty Cat inboard planetaryapproved for odd sized dual tires up to30.5-32 inner and 24.5-32 outer andsingle wide tires up to 73-44with chains
Differential locks, independent frontand rear
Four-wheel enclosed disc service brakesParking brake, hydraulically released,spring applied
Fuel tank, high capacity
OTHER STANDARD EQUIPMENTAccess panels, hinged or removableArticulation lock linkCenter Hitch, dual tapered rollerbearing upper and lower
Ecology drains (engine oil, enginecoolant, hyd tank, fuel tank, axles,transmission)
Fuel fill, ground level
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 525D-001
CATERPILLAR MACHINE PRICE LIST 525D525D WHEEL SKIDDER Ship Weight List PriceLAGRANGE, GA, USA lbs At Factory
OTHER STANDARD EQUIPMENT (CONT.)
Frames, heavy dutyLimb risers, heavy dutySegregated compartments, engine/CEMand cooling
HYDRAULICSLoad Sense HydraulicsPumps, variable displacement mainand fan
Main control valve, high performanceand multifunctioning
Filter, in-tank returnCAT ToughGuard hoses
ANTIFREEZEIncludes 50% concentration of extendedlife coolant with freeze protection to-36C (-33F) and anti-boil protectionto 106C (223F)
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 525D-002
CATERPILLAR MACHINE PRICE LIST 525D525D WHEEL SKIDDER Ship Weight List PriceLAGRANGE, GA, USA lbs At Factory
366-4832 525D SKIDDER 21,431 $238,250.......................................203 hp/143.8 inch wheelbase
0P-3512 525D MISC MATERIAL 0 NC......................................Use this as the top level reference number when orderingmiscellaneous material without ordering a machine.
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 525D-003
CATERPILLAR MACHINE PRICE LIST 525DREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
ARCH/BOOM AND WINCH
ARCH/BOOM (Must Select One)
L 367-1846 ARCH & GRAPPLE, SF 5,934 $30,120...............................Includes: Single function arch; 1.34 sq.m (14.4 sq.ft)continuous rotation grappleREQUIRES: 426-4640 Frame, SF Rear, No fender -OR-
Includes: Cable arch; Heavy duty 2-position fairlead; Highperformance hydraulic logging winch; Cable rear frame withheavy duty, extended coverage cable fenders; For cableapplications only where significant rear tire protectionis requiredREQUIRES: 454-8496 Cab, Encl Cable W/Whl SteeringCANNOT BE USED WITH: 373-4610 Winch, Retrieval
373-4611 Winch, Logging373-4612 Retrieval Ready426-4640 Frame, SF Rear, No Fender393-8135 Frame, SF Rear, Garpple Fender426-4650 Frame, DF Rear, No Fender369-2493 Frame, DF Rear, Grapple Fender
C 476-6796 INDUSTRIAL ARRANGEMENT 339 $11,000............................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Includes: 6 section control valve with 4 open sectionscontrolled by joystick in the cab, 5th section to controla retrieval winch and 6th section to control the blade.REQUIRES: 454-8494 Cab, Encl GR W/Whl Steering
426-4640 Frame, SF Rear, No Fender -OR-393-8135 Frame, SF Rear, GR Fender -OR-426-4650 Frame, DF Rear, No Fender -OR-369-2493 Frame, DF Rear, GR Fender
CANNOT BE USED WITH: 373-4610 Winch, Retrieval373-4611 Winch, Logging373-4612 Retrieval Ready
WINCH (Grapple Skidder Only)
L 373-4612 RETRIEVAL READY 0 NC......................................Includes: Universal winch mounting plate with additional treadplate; Bolt on arch guard; Compatible with either RetrievalWinch or Logging Winch not installed kitsCANNOT BE USED WITH: 367-1852 Arch & Winch, Cable -OR-
Includes: Hydraulic retrieval winch; Fairleadroller subassemblyCANNOT BE USED WITH: 367-1852 Arch & Winch, Cable -OR-
476-6796 Industrial Arrangement
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 525D-004
CATERPILLAR MACHINE PRICE LIST 525DREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
ARCH/BOOM AND WINCH (CONT.)
WINCH (Grapple Skidder Only) (Cont.)
L 373-4611 WINCH, LOGGING 1,879 $22,590..................................Includes: High performance hydraulic logging winch;Fairlead roller subassemblyCANNOT BE USED WITH: 367-1852 Arch & Winch, Cable -OR-
476-6796 Industrial Arrangement
FRAME
REAR FRAME (Grapple Or Industrial Skidder Only)
L 426-4640 FRAME, SF REAR, NO FENDER 2,806 NC.........................Includes: Single function rear frame,; For applications whererear tire protection is not requiredREQUIRES: 367-1846 Arch & Grapple, SF -OR-
476-6796 Industrial ArrangementL 393-8135 FRAME, SF REAR, GR FENDER 3,331 $1,905.........................
Includes: Single function rear frame with grapple fenders;For applications where rear tire protection is requiredREQUIRES: 367-1846 Arch & Grapple, SF -OR-
Includes: Dual function rear frame with grapple fenders;For applications where rear tire protection is requiredREQUIRES: 367-1849 Arch Boom & Grapple, DF -OR-
476-6796 Industrial Arrangement
OPERATOR ENVIRONMENT
CAB (Must Select One)
L 454-8494 CAB, ENCL GR W/WHL STEERING 2,818 NC......................Includes: Enclosed ROPS, FOPS, and OPS certified cab; Highperformance HVAC system; Air suspension high back seat withlap seat belt; 30 degree Seat rotation with positions at 0, 10,20, and 30 degrees; Telescopic and tilting steering wheel;Seat mounted electrohydraulic grapple joystick with arch/boom andgrapple controls; Single position throttle and brake pedalsCANNOT BE USED WITH: 367-1852 Arch & Winch, Cable
L 454-8496 CAB, ENCL CABLE W/WHL STEERING 2,774 NC...................Includes: Enclosed ROPS, FOPS, and OPS certified cab; Highperformance HVAC system; Air suspension high back seat withlap seat belt; 30 degree Seat rotation with positions at 0, 10,20, and 30 degrees; Telescopic and tilting steering wheel withtransmission controls; Single position throttle and brake pedalsCANNOT BE USED WITH: 367-1846 Arch & Grapple, SF -OR-
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 525D-005
CATERPILLAR MACHINE PRICE LIST 525DREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
OPERATOR ENVIRONMENT (CONT.)
SCREENS (Must Select One)
L 435-4324 SCREENS, READY ONLY 18 NC................................Includes: Grab handle/Window retainer;Mounting positions ready for Window and Wiper Screens
L 378-9921 SCREENS, WINDOW & WIPER 176 $1,110............................Includes: Additional swing open screens for the 3 rear windowsprotecting windows and optional wipers; REQUIRES GLASS TOREMAIN INSTALLED AND IS NOT CERTIFIED FOR OPERATORPROTECTION WITHOUT GLASS INSTALLED
WATER TANKS
(Must Select One)
L 378-9923 WATER TANK, READY ONLY 109 NC............................Includes: Reinforced plate to cover the in-roof watertank position
L 375-2731 WATER TANK 220 $2,370.......................................Includes: Integrated in-roof water tank; Cab located hosewith nozzle; Pressure valve with gauge
BLADES/MOLDBOARDS
(Must Select One)
L 368-5677 BLADE, STANDARD 2,344 $2,490................................Includes: Overall width of 2678 mm (105.4") for standardtire coverage; Replaceable cutting edges
L 385-5004 BLADE, WIDE 2,559 $3,140.....................................Includes: Overall width of 3138 mm (123.5") for standardtire coverage; Replaceable cutting edges
C 476-6807 BLADE, OMISSION 0 NC.....................................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Includes: Lines routings from the main control valve to thefront frame and capped near the blade mounting location.
SERVICE INSTRUCTIONS
DECAL PACKAGE & LUBE GROUP (Must Select One)
426-4617 INSTRUCTIONS, ANSI 0 NC...................................Includes: Standard ANSI decal package required for all USAshipments
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 525D-006
CATERPILLAR MACHINE PRICE LIST 525DREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
TIRES, RIMS, & WHEELS
Due to industry-wide tire availability limitations, tire brand andtype cannot be guaranteed. Every effort will be made to satisfy yourtire choice. However, if the tire type cannot be supplied we willcontact the dealer to propose alternatives. The dealer needs to choosebetween an alternative tire or a "rims only" option (where available)within 72 hours. If no response is provided by the deadline, the orderwill default to the alternative tire and will be changed at thatpoint. As a consequence of a possible tire change, the total machineprice will be decreased or increased depending on the price of the newtire.
FIRESTONE TIRES (Tubes ARE Included)
P 375-0679 TIRES, 35.5L-32 24PR FS 7,807 $17,710............................Provides width of 3703 mm (145.8")
P 375-2706 TIRES, 35.5L-32 24PR FS, NOAW 7,807 $17,640......................Provides narrow overall width of 3533 mm (139.1"). Notapproved for use with chains due to narrow overallwidth offset
P 375-0704 TIRES, 35.5L-32 20PR FS 7,575 $12,130............................Provides width of 3703 mm (145.8")
P 375-0706 TIRES, 35.5L-32 20PR FS, NOAW 7,575 $12,050......................Provides narrow overall width of 3533 mm (139.1"). Notapproved for use with chains due to narrow overallwidth offset
P 375-0694 TIRES,30.5L-32 26PR FS 2X RING 6,951 $9,550......................Includes mounting plate for 24.5L-32 outer duals to beattached. Provides narrow overall width of 3216 mm (126.6").Not approved for use with chains due to narrow overallwidth offset
P 375-0685 TIRES,30.5L-32 20PR FS 2X RING 6,843 $5,820......................Includes mounting plate for 24.5L-32 outer duals to beattached. Provides narrow overall width of 3216 mm (126.6").Not approved for use with chains due to narrow overallwidth offset
P 375-0682 TIRES, 30.5L-32 26PR FS 6,299 $4,005............................Provides width of 3386 mm (133.3")
P 375-0697 TIRES, 30.5L-32 26PR FS, NOAW 6,299 $3,635......................Provides narrow overall width of 3216 mm (126.6"). Notapproved for use with chains due to narrow overallwidth offset
P 374-9855 TIRES, 30.5L-32 20PR FS 6,191 $780............................Provides width of 3386 mm (133.3")
P 375-0691 TIRES, 30.5L-32 20PR FS NOAW 6,191 $750.......................Provides narrow overall width of 3216 mm (126.6"). Notapproved for use with chains due to narrow overallwidth offset
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 525D-007
CATERPILLAR MACHINE PRICE LIST 525DREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
TIRES, RIMS, & WHEELS (CONT.)
FIRESTONE TIRES (Tubes NOT Included)
C 457-5772 TIRES, 35.5L-32 20PR FS 7,405 $9,770............................Provides width of 3703 mm (145.8")Tubes NOT included.CONTACT LAGRANGE FACTORY FOR AVAILABILITY
C 457-5774 TIRES, 35.5L-32 20PR FS NOAW 7,405 $9,690.......................Provides narrow overall width of 3533 mm (139.1")Tubes NOT included.Not approved for use with chains due to narrowoverall width offsetCONTACT LAGRANGE FACTORY FOR AVAILABILITY
C 457-5768 TIRES, 30.5L-32 20PR FS 6,020 $-1,275............................Provides width of 3386 mm (133.3")Tubes NOT included.CONTACT LAGRANGE FACTORY FOR AVAILABILITY
C 457-5770 TIRES, 30.5L-32 20PR FS NOAW 6,020 $-1,305.......................Provides narrow overall width of 3216 mm (126.6")Tubes NOT included.Not approved for use with chains due to narrowoverall width offset.CONTACT LAGRANGE FACTORY FOR AVAILABILITY
PRIMEX TIRES (Tubes ARE Included)
C 426-1333 TIRES, 35.5L-32 20PR PM 7,575 $9,000............................Provides width of 3703 mm (145.8")CONTACT LAGRANGE FACTORY FOR AVAILABILITY
C 426-1329 TIRES, 35.5L-32 20PR PM, NOAW 7,575 $8,920......................Provides narrow overall width of 3533 mm (139.1"). Notapproved for use with chains due to narrow overallwidth offset.CONTACT LAGRANGE FACTORY FOR AVAILABILITY
C 426-1321 TIRES, 30.5L-32 20PR PM 2XRING 6,843 $3,580......................Includes mounting plate for 24.5L-32 outer duals to beattached. Provides narrow overall width of 3216 mm (126.6").Not approved for use with chains due to narrow overallwidth offset.CONTACT LAGRANGE FACTORY FOR AVAILABILITY
C 426-1325 TIRES, 30.5L-32 20PR PM 6,191 $-1,355............................Provides width of 3386 mm (133.3")CONTACT LAGRANGE FACTORY FOR AVAILABILITY
C 426-1317 TIRES, 30.5L-32 20PR PM, NOAW 6,191 $-1,385......................Provides narrow overall width of 3216 mm (126.6"). Notapproved for use with chains due to narrow overallwith offset.CONTACT LAGRANGE FACTORY FOR AVAILABILITY
NO RIMS -TIRES
P 174-7607 TIRES, ALLOWANCE FOR OMISSION 0 $-17,770........................Omits tires and rims.
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 525D-008
CATERPILLAR MACHINE PRICE LIST 525DREF Ship Weight List Price
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 525D-009
CATERPILLAR MACHINE PRICE LIST 525DREF Ship Weight List Price
USE NO. lbs At FactoryOPTIONAL ATTACHMENTS
OTHER ATTACHMENTS
STARTING AIDS
P 367-4974 RECEPTACLE, JUMP START 2 $283...............................Includes: Remote mounted battery jump start posts; Does notrequire special jump start cable
P 374-3425 STARTING, COLD WEATHER 26 $585.............................Includes: Mounting brackets; Ether hoses and lines; Ethercanister NOT includedThe ether bottle is available seperately from Parts Distribution
OTHER
P 378-9922 LIGHTS, LED WORKING 18 $1,040.................................Includes: 8 LED lights (2 front, 4 sides, 2 rear) in additionto the 4 standard halogen lights (2 front, 2 rear)
L 375-2729 WIPERS, FRONT AND REAR 39 $690..............................Includes: Single wiper on front window and 2 wipers onrear windows with washer; Single speed
L 436-1770 STEERING, SECONDARY 84 $3,055................................Includes: Electric powered secondary steering pump
PACKING
MISCELLANEOUS
0P-0058 PACK, MISC SHIPMENTS $153 NET.............................................Required when ordering miscellaneous materialwithout ordering a machine.
FIELD INSTALLED ATTACHMENTS
Available for MISC orders only.
Use 0P-3512 for TOP LEVEL and 0P-0058 for PACKING.
Kits must be ordered NOT-INSTALLED.
No returns on Kit components or for parts removed.
C 472-0339 KIT, SCREENS, WINDOW & WIPER 350 $2,365 NI........................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Includes: Additional swing open screens for the 3 rearwindows protecting windows and optional wipers; REQUIRESGLASS TO REMAIN INSTALLED AND IS NOT CERTIFIED FOROPERATOR PROTECTION WITHOUT GLASS INSTALLED
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 525D-010
CATERPILLAR MACHINE PRICE LIST 535D535D WHEEL SKIDDER Ship Weight List PriceLAGRANGE, GA, USA lbs At Factory
Starter, electric, heavy dutyStarting and charging systemDiagnostic connectorHorn, warning
OPERATOR ENVIRONMENTPower port, 12VConverter, 24V to 12VBeverage holders (2)Headliner with dome lightFloormat, non permeable and removableMirror, rear viewRadio, AM/FM/CD/Sirius-SatelliteComputerized Monitoring System
Swing Out PanelAir to air aftercoolerAir conditioner condenser
Reversing cooling fan, hydraulicallydriven on demand
Transmission, countershaftpowershift (6F/3R)
Lock-up torque converterLubed for life driveline slipjoint anduniversal joints
Axles, heavy duty Cat inboard planetaryapproved for odd sized dual tires up to30.5-32 inner and 24.5-32 outer andsingle wide tires up to 73-44with chains
Differential locks, independent frontand rear
Four-wheel enclosed disc service brakesParking brake, hydraulically released,spring applied
Fuel tank, high capacity
OTHER STANDARD EQUIPMENTAccess panels, hinged or removableArticulation lock linkCenter Hitch, dual tapered rollerbearing upper and lower
Ecology drains (engine oil, enginecoolant, hyd tank, fuel tank, axles,transmission)
Fuel fill, ground level
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 535D-001
CATERPILLAR MACHINE PRICE LIST 535D535D WHEEL SKIDDER Ship Weight List PriceLAGRANGE, GA, USA lbs At Factory
OTHER STANDARD EQUIPMENT (CONT.)
Frames, heavy dutyLimb risers, heavy dutySegregated compartments, engine/CEMand cooling
HYDRAULICSLoad Sense HydraulicsPumps, variable displacement mainand fan
Main control valve, high performanceand multifunctioning
Filter, in-tank returnCAT ToughGuard hoses
ANTIFREEZEIncludes 50% concentration of extendedlife coolant with freeze protection to-36C (-33F) and anti-boil protectionto 106C (223F)
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 535D-002
CATERPILLAR MACHINE PRICE LIST 535D535D WHEEL SKIDDER Ship Weight List PriceLAGRANGE, GA, USA lbs At Factory
366-4833 535D SKIDDER 21,637 $252,080.......................................225 hp/149.4 inch wheelbase
0P-3513 535D MISC MATERIAL 0 NC......................................Use this as the top level reference number when orderingmiscellaneous material without ordering a machine.
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 535D-003
CATERPILLAR MACHINE PRICE LIST 535DREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
ARCH/BOOM AND WINCH
ARCH/BOOM (Must Select One)
L 367-1859 ARCH & GRAPPLE, SF 6,145 $36,200...............................Includes: Single function arch; 1.54 sq.m (16.6 sq.ft)continuous rotation grappleREQUIRES: 426-4591 Frame, SF Rear, No Fender -OR-
Includes Cable arch; Heavy duty 2-position fairlead; Highperformance hydraulic logging winch; Cable rear frame withheavy duty, extended coverage cable fenders; For cableapplications only where significant rear tire protectionis requiredREQUIRES: 454-8496 Cab, Encl Cable W/Whl SteeringCANNOT BE USED WITH: 373-4618 Winch, Retrieval Ready
373-4613 Winch, Retrieval373-4614 Winch, Logging426-4591 Frame, SF Rear, No Fender426-4590 Frame, SF Rear, Grapple Fender426-4592 Frame, DF Rear, No Fender378-7300 Frame, DF Rear, Grapple Fender
C 476-4798 INDUSTRIAL ARRANGEMENT 339 $11,600............................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Includes: 6 section control valve with 4 open sectionscontrolled by joystick in the cab, 5th section to controla retrieval winch and 6th section to control the blade.REQUIRES: 454-8494 Cab, Encl GR W/Whl Steering
426-4591 Frame, SF Rear No Fender -OR-426-4590 Frame, SF Rear Grapple Fender -OR-426-4592 Frame, DF Rear No Fender -OR-378-7300 Frame, DF Rear Grapple Fender
CANNOT BE USED WITH: 373-4618 Winch, Retrieval Ready373-4613 Winch, Retrieval373-4614 Winch, Logging
WINCH (Grapple Skidder Only)
L 373-4618 WINCH, RETRIEVAL READY 0 NC...............................Includes: Universal winch mounting plate with additional treadplate; Bolt on arch guard; Compatible with either RetrievalWinch or Logging Winch not installed kitsCANNOT BE USED WITH: 367-1853 Arch & Winch, Cable -OR-
Includes: Hydraulic retrieval winch; Fairleadroller subassemblyCANNOT BE USED WITH: 367-1853 Arch & Winch, Cable -OR-
476-6798 Industrial Arrangement
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 535D-004
CATERPILLAR MACHINE PRICE LIST 535DREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
ARCH/BOOM AND WINCH (CONT.)
WINCH (Grapple Skidder Only) (Cont.)
L 373-4614 WINCH, LOGGING 1,880 $22,590..................................Includes: High performance hydraulic logging winch;Fairlead roller subassemblyCANNOT BE USED WITH: 367-1853 Arch & Winch, Cable -OR-
476-6798 Industrial Arrangement
FRAME
REAR FRAME (Grapple or Industrial Skidder Only)
L 426-4591 FRAME, SF REAR NO FENDER 2,908 NC.........................Includes: Single function rear frame,; For applications whererear tire protection is not requiredREQUIRES: 367-1859 Arch & Grapple, SF -OR-
Includes: Single function rear frame with grapple fenders;For applications where rear tire protection is requiredREQUIRES: 367-1859 Arch & Grapple, SF -OR-
Includes: Dual function rear frame with grapple fenders;For applications where rear tire protection is requiredREQUIRES: 367-1850 Arch Boom & Grapple, DF -OR-
476-6798 Industrial Arrangement
OPERATOR ENVIRONMENT
CAB (Must Select One)
L 454-8494 CAB, ENCL GR W/WHL STEERING 2,818 NC......................Includes: Enclosed ROPS, FOPS, and OPS certified cab; Highperformance HVAC system; Air suspension high back seat withlap seat belt; 30 degree Seat rotation with positions at 0, 10,20, and 30 degrees; Telescopic and tilting steering wheel;Seat mounted electrohydraulic grapple joystick with arch/boom andgrapple controls; Single position throttle and brake pedalsCANNOT BE USED WITH: 367-1853 Arch & Winch, Cable
L 454-8496 CAB, ENCL CABLE W/WHL STEERING 2,774 NC...................Includes: Enclosed ROPS, FOPS, and OPS certified cab; Highperformance HVAC system; Air suspension high back seat withlap seat belt; 30 degree Seat rotation with positions at 0, 10,20, and 30 degrees; Telescopic and tilting steering wheel withtransmission controls; Single position throttle and brake pedalsCANNOT BE USED WITH: 367-1859 Arch & Grapple, SF
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 535D-005
CATERPILLAR MACHINE PRICE LIST 535DREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
OPERATOR ENVIRONMENT (CONT.)
SCREENS (Must Select One)
L 435-4324 SCREENS, READY ONLY 18 NC................................Includes: Grab handle/Window retainer;Mounting positions ready for Window and Wiper Screens
L 378-9921 SCREENS, WINDOW & WIPER 176 $1,110............................Includes: Additional swing open screens for the 3 rear windowsprotecting windows and optional wipers; REQUIRES GLASS TOREMAIN INSTALLED AND IS NOT CERTIFIED FOR OPERATORPROTECTION WITHOUT GLASS INSTALLED
WATER TANKS
(Must Select One)
L 378-9923 WATER TANK, READY ONLY 109 NC............................Includes: Reinforced plate to cover the in-roof watertank position
L 375-2731 WATER TANK 220 $2,370.......................................Includes: Integrated in-roof water tank; Cab located hosewith nozzle; Pressure valve with gauge
BLADES/MOLDBOARDS
(Must Select One)
L 388-0456 BLADE, STANDARD 2,344 $2,490................................Includes: Overall width of 2678 mm (105.4") for standardtire coverage; Replaceable cutting edges
L 385-5009 BLADE, WIDE 2,559 $3,140.....................................Includes: Overall width of 3138 mm (123.5") for standardtire coverage; Replaceable cutting edges
C 476-6808 BLADE, OMISSION 0 NC.....................................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Includes: Lines routings from the main control valve to thefront frame and capped near the blade mounting location.
SERVICE INSTRUCTIONS
DECAL PACKAGE & LUBE GROUP (Must Select One)
426-4618 INSTRUCTIONS, ANSI 0 NC ...................................Includes: Standard ANSI decal package required for all USAshipments
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 535D-006
CATERPILLAR MACHINE PRICE LIST 535DREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
TIRES, RIMS, & WHEELS
Due to industry-wide tire availability limitations, tire brand andtype cannot be guaranteed. Every effort will be made to satisfy yourtire choice. However, if the tire type cannot be supplied we willcontact the dealer to propose alternatives. The dealer needs to choosebetween an alternative tire or a "rims only" option (where available)within 72 hours. If no response is provided by the deadline, the orderwill default to the alternative tire and will be changed at thatpoint. As a consequence of a possible tire change, the total machineprice will be decreased or increased depending on the price of the newtire.
FIRESTONE TIRES (Tubes ARE Included)
P 375-0679 TIRES, 35.5L-32 24PR FS 7,807 $17,710............................Provides width of 3703 mm (145.8")
P 375-2706 TIRES, 35.5L-32 24PR FS, NOAW 7,807 $17,640......................Provides narrow overall width of 3533 mm (139.1"). Notapproved for use with chains due to narrow overallwidth offset
P 375-0704 TIRES, 35.5L-32 20PR FS 7,575 $12,130............................Provides width of 3703 mm (145.8")
P 375-0706 TIRES, 35.5L-32 20PR FS, NOAW 7,575 $12,050......................Provides narrow overall width of 3533 mm (139.1"). Notapproved for use with chains due to narrow overallwidth offset
P 375-0694 TIRES,30.5L-32 26PR FS 2X RING 6,951 $9,550......................Includes mounting plate for 24.5L-32 outer duals to beattached. Provides narrow overall width of 3216 mm (126.6").Not approved for use with chains due to narrow overallwidth offset
P 375-0685 TIRES,30.5L-32 20PR FS 2X RING 6,843 $5,820......................Includes mounting plate for 24.5L-32 outer duals to beattached. Provides narrow overall width of 3216 mm (126.6").Not approved for use with chains due to narrow overallwidth offset
P 375-0682 TIRES, 30.5L-32 26PR FS 6,299 $4,005............................Provides width of 3386 mm (133.3")
P 375-0697 TIRES, 30.5L-32 26PR FS, NOAW 6,299 $3,635......................Provides narrow overall width of 3216 mm (126.6"). Notapproved for use with chains due to narrow overallwidth offset
P 374-9855 TIRES, 30.5L-32 20PR FS 6,191 $780............................Provides width of 3386 mm (133.3")
P 375-0691 TIRES, 30.5L-32 20PR FS NOAW 6,191 $750.......................Provides narrow overall width of 3216 mm (126.6"). Notapproved for use with chains due to narrow overallwidth offset
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 535D-007
CATERPILLAR MACHINE PRICE LIST 535DREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
TIRES, RIMS, & WHEELS (CONT.)
FIRESTONE TIRES (Tubes NOT included)
C 457-5772 TIRES, 35.5L-32 20PR FS 7,405 $9,770............................Provides width of 3703 mm (145.8")Tubes NOT included.CONTACT LAGRANGE FACTORY FOR AVAILABILITY
C 457-5774 TIRES, 35.5L-32 20PR FS NOAW 7,405 $9,690.......................Provides narrow overall width of 3533 mm (139.1")Tubes NOT included.Not approved for use with chains due to narrowoverall width offsetCONTACT LAGRANGE FACTORY FOR AVAILABILITY
C 457-5768 TIRES, 30.5L-32 20PR FS 6,020 $-1,275............................Provides width of 3386 mm (133.3")Tubes NOT included.CONTACT LAGRANGE FACTORY FOR AVAILABILITY
C 457-5770 TIRES, 30.5L-32 20PR FS NOAW 6,020 $-1,305.......................Provides narrow overall width of 3216 mm (126.6")Tubes NOT included.Not approved for use with chains due to narrowoverall width offset.CONTACT LAGRANGE FACTORY FOR AVAILABILITY
PRIMEX TIRES (Tubes ARE Included)
C 426-1333 TIRES, 35.5L-32 20PR PM 7,575 $9,000............................Provides width of 3703 mm (145.8")CONTACT LAGRANGE FACTORY FOR AVAILABILITY
C 426-1329 TIRES, 35.5L-32 20PR PM, NOAW 7,575 $8,920......................Provides narrow overall width of 3533 mm (139.1"). Notapproved for use with chains due to narrow overallwidth offset.CONTACT LAGRANGE FACTORY FOR AVAILABILITY
C 426-1321 TIRES, 30.5L-32 20PR PM 2XRING 6,843 $3,580......................Includes mounting plate for 24.5L-32 outer duals to beattached. Provides narrow overall width of 3216 mm (126.6").Not approved for use with chains due to narrow overallwidth offset.CONTACT LAGRANGE FACTORY FOR AVAILABILITY
C 426-1325 TIRES, 30.5L-32 20PR PM 6,191 $-1,355............................Provides width of 3386 mm (133.3")CONTACT LAGRANGE FACTORY FOR AVAILABILITY
C 426-1317 TIRES, 30.5L-32 20PR PM, NOAW 6,191 $-1,385......................Provides narrow overall width of 3216 mm (126.6"). Notapproved for use with chains due to narrow overallwith offset.CONTACT LAGRANGE FACTORY FOR AVAILABILITY
NO RIMS -TIRES
P 174-7607 TIRES, ALLOWANCE FOR OMISSION 0 $-17,770........................Omits tires and rims.
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 535D-008
CATERPILLAR MACHINE PRICE LIST 535DREF Ship Weight List Price
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 535D-009
CATERPILLAR MACHINE PRICE LIST 535DREF Ship Weight List Price
USE NO. lbs At FactoryOPTIONAL ATTACHMENTS
OTHER ATTACHMENTS
STARTING AIDS
P 367-4974 RECEPTACLE, JUMP START 2 $283...............................Includes: Remote mounted battery jump start posts; Does notrequire special jump start cable
P 374-3425 STARTING, COLD WEATHER 26 $585.............................Includes: Mounting brackets; Ether hoses and lines; Ethercanister NOT includedThe ether bottle is available seperately from Parts Distribution
OTHER
P 378-9922 LIGHTS, LED WORKING 18 $1,040.................................Includes: 8 LED lights (2 front, 4 sides, 2 rear) in additionto the 4 standard halogen lights (2 front, 2 rear)
L 375-2729 WIPERS, FRONT AND REAR 39 $690..............................Includes: Single wiper on front window and 2 wipers onrear windows with washer; Single speed
L 436-1770 STEERING, SECONDARY 84 $3,055................................Includes: Electric powered secondary steering pump
PACKING
MISCELLANEOUS
0P-0058 PACK, MISC SHIPMENTS $153 NET.............................................Required when ordering miscellaneous materialwithout ordering a machine.
FIELD INSTALLED ATTACHMENTS
Available for MISC orders only.
Use 0P-3513 for TOP LEVEL and 0P-0058 for PACKING.
Kits must be ordered NOT-INSTALLED.
No returns on Kit components or for parts removed.
C 472-0339 KIT, SCREENS, WINDOW & WIPER 350 $2,365 NI........................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Includes: Additional swing open screens for the 3 rearwindows protecting windows and optional wipers; REQUIRESGLASS TO REMAIN INSTALLED AND IS NOT CERTIFIED FOROPERATOR PROTECTION WITHOUT GLASS INSTALLED
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 535D-010
CATERPILLAR MACHINE PRICE LIST 545D545D WHEEL SKIDDER Ship Weight List PriceLAGRANGE, GA, USA lbs At Factory
Starter, electric, heavy dutyStarting and charging systemDiagnostic connectorHorn, warning
OPERATOR ENVIRONMENTPower port, 12VConverter, 24V to 12VBeverage holders (2)Headliner with dome lightFloormat, non permeable and removableMirror, rear viewRadio, AM/FM/CD/Sirius-SatelliteComputerized Monitoring System
Swing Out PanelAir to air aftercoolerAir conditioner condenser
Reversing cooling fan, hydraulicallydriven on demand
Transmission, countershaftpowershift (6F/3R)
Lock-up torque converterLubed for life driveline slipjoint anduniversal joints
Axles, heavy duty Cat inboard planetaryapproved for odd sized dual tires up to30.5-32 inner and 24.5-32 outer andsingle wide tires up to 73-44with chains
Differential locks, independent frontand rear
Four-wheel enclosed disc service brakesParking brake, hydraulically released,spring applied
Fuel tank, high capacity
OTHER STANDARD EQUIPMENTAccess panels, hinged or removableArticulation lock linkCenter Hitch, dual tapered rollerbearing upper and lower
Ecology drains (engine oil, enginecoolant, hyd tank, fuel tank, axles,transmission)
Fuel fill, ground level
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 545D-001
CATERPILLAR MACHINE PRICE LIST 545D545D WHEEL SKIDDER Ship Weight List PriceLAGRANGE, GA, USA lbs At Factory
OTHER STANDARD EQUIPMENT (CONT.)
Frames, heavy dutyLimb risers, heavy dutySegregated compartments, engine/CEMand cooling
HYDRAULICSLoad Sense HydraulicsPumps, variable displacement mainand fan
Main control valve, high performanceand multifunctioning
Filter, in-tank returnCAT ToughGuard hoses
ANTIFREEZEIncludes 50% concentration of extendedlife coolant with freeze protection to-36C (-33F) and anti-boil protectionto 106C (223F)
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 545D-002
CATERPILLAR MACHINE PRICE LIST 545D545D WHEEL SKIDDER Ship Weight List PriceLAGRANGE, GA, USA lbs At Factory
366-4834 545D SKIDDER 22,203 $290,130.......................................250 hp/155.1 inch wheelbase
0P-3514 545D MISC MATERIAL 0 NC......................................Use this as the top level reference number when orderingmiscellaneous material without ordering a machine.
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 545D-003
CATERPILLAR MACHINE PRICE LIST 545DREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
ARCH/BOOM AND WINCH
ARCH/BOOM (Must Select One)
L 367-1861 ARCH BOOM & GRAPPLE, DF 7,491 $57,900..........................Includes: Dual function arch and boom; 1.77 sq.m(19.0 sq.ft) continuous rotation grappleREQUIRES: 426-4592 Frame, DF Rear, No Fender -OR-
C 476-6800 INDUSTRIAL ARRANGEMENT 339 $11,600............................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Includes: 6 section control valve with 4 open sectionscontrolled by joystick in the cab, 5th section to controla retrieval winch and 6th section to control the blade.REQUIRES: 454-8494 Cab, Encl GR W/whl Steering
CANNOT BE USED WITH: 373-4618 Winch, Retrieval Ready373-4613 Winch, Retrieval373-4614 Winch, Logging
WINCH (Grapple Skidder Only)
L 373-4618 WINCH, RETRIEVAL READY 0 NC...............................Includes: Universal winch mounting plate with additional treadplate; Bolt on arch guard; Compatible with either RetrievalWinch or Logging Winch not installed kitsCANNOT BE USED WITH: 367-1853 Arch & Winch, Cable -OR-
Includes: High performance hydraulic logging winch;Fairlead roller subassemblyCANNOT BE USED WITH: 367-1853 Arch & Winch, Cable -OR-
476-6800 Industrial Arrangement
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 545D-004
CATERPILLAR MACHINE PRICE LIST 545DREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
FRAME
REAR FRAME (Grapple or Industrial Skidder Only)
L 426-4592 FRAME, DF REAR NO FENDER 2,945 NC.........................Includes: Dual function rear frame; For applications whererear tire protection is not requiredREQUIRES: 367-1861 Arch Boom & Grapple, DF -OR-
Includes: Dual function rear frame with grapple fenders;For applications where rear tire protection is requiredREQUIRES: 367-1861 Arch Boom & Grapple, DF -OR-
476-6800 Industrial Arrangement
OPERATOR ENVIRONMENT
CAB (Must Select One)
L 454-8494 CAB, ENCL GR W/WHL STEERING 2,818 NC......................Includes: Enclosed ROPS, FOPS, and OPS certified cab; Highperformance HVAC system; Air suspension high back seat withlap seat belt; 30 degree Seat rotation with positions at 0, 10,20, and 30 degrees; Telescopic and tilting steering wheel;Seat mounted electrohydraulic grapple joystick with arch/boom andgrapple controls; Single position throttle and brake pedalsCANNOT BE USED WITH: 367-1853 Arch & Winch, Cable
L 454-8496 CAB, ENCL CABLE W/WHL STEERING 2,774 NC...................Includes: Enclosed ROPS, FOPS, and OPS certified cab; Highperformance HVAC system; Air suspension high back seat withlap seat belt; 30 degree Seat rotation with positions at 0, 10,20, and 30 degrees; Telescopic and tilting steering wheel withtransmission controls; Single position throttle and brake pedalsCANNOT BE USED WITH: 367-1861 Arch Boom & Grapple, DF -OR-
476-6800 Industrial Arrangement
SCREENS (Must Select One)
L 435-4324 SCREENS, READY ONLY 18 NC................................Includes: Grab handle/Window retainer;Mounting positions ready for Window and Wiper Screens
L 378-9921 SCREENS, WINDOW & WIPER 176 $1,110............................Includes: Additional swing open screens for the 3 rear windowsprotecting windows and optional wipers; REQUIRES GLASS TOREMAIN INSTALLED AND IS NOT CERTIFIED FOR OPERATORPROTECTION WITHOUT GLASS INSTALLED
WATER TANKS
(Must Select One)
L 378-9923 WATER TANK, READY ONLY 109 NC............................Includes: Reinforced plate to cover the in-roof watertank position
L 375-2731 WATER TANK 220 $2,370.......................................Includes: Integrated in-roof water tank; Cab located hosewith nozzle; Pressure valve with gauge
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 545D-005
CATERPILLAR MACHINE PRICE LIST 545DREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
BLADES/MOLDBOARDS
(Must Select One)
L 379-5775 BLADE, STANDARD 2,346 $2,490................................Includes: Overall width of 2678 mm (105.4") for standardtire coverage; Replaceable cutting edges
L 385-5011 BLADE, WIDE 2,561 $3,140.....................................Includes: Overall width of 3138 mm (123.5") for standardtire coverage; Replaceable cutting edges
C 476-6809 BLADE, OMISSION 0 NC.....................................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Includes: Lines routings from the main control valve to thefront frame and capped near the blade mounting location.
SERVICE INSTRUCTIONS
DECAL PACKAGE & LUBE GROUP (Must Select One)
426-4619 INSTRUCTIONS, ANSI 0 NC ...................................Includes: Standard ANSI decal package required for all USAshipments
TIRES, RIMS, & WHEELS
Due to industry-wide tire availability limitations, tire brand andtype cannot be guaranteed. Every effort will be made to satisfy yourtire choice. However, if the tire type cannot be supplied we willcontact the dealer to propose alternatives. The dealer needs to choosebetween an alternative tire or a "rims only" option (where available)within 72 hours. If no response is provided by the deadline, the orderwill default to the alternative tire and will be changed at thatpoint. As a consequence of a possible tire change, the total machineprice will be decreased or increased depending on the price of the newtire.
FIRESTONE TIRES (Tubes ARE Included)
P 375-0679 TIRES, 35.5L-32 24PR FS 7,807 $17,710............................Provides width of 3703 mm (145.8")
P 375-2706 TIRES, 35.5L-32 24PR FS, NOAW 7,807 $17,640......................Provides narrow overall width of 3533 mm (139.1"). Notapproved for use with chains due to narrow overallwidth offset
P 375-0704 TIRES, 35.5L-32 20PR FS 7,575 $12,130............................Provides width of 3703 mm (145.8")
P 375-0706 TIRES, 35.5L-32 20PR FS, NOAW 7,575 $12,050......................Provides narrow overall width of 3533 mm (139.1"). Notapproved for use with chains due to narrow overallwidth offset
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 545D-006
CATERPILLAR MACHINE PRICE LIST 545DREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
TIRES, RIMS, & WHEELS (CONT.)
FIRESTONE TIRES (Tubes ARE Included) (Cont.)
P 375-0694 TIRES,30.5L-32 26PR FS 2X RING 6,951 $9,550......................Includes mounting plate for 24.5L-32 outer duals to beattached. Provides narrow overall width of 3216 mm (126.6").Not approved for use with chains due to narrow overallwidth offset
P 375-0685 TIRES,30.5L-32 20PR FS 2X RING 6,843 $5,820......................Includes mounting plate for 24.5L-32 outer duals to beattached. Provides narrow overall width of 3216 mm (126.6").Not approved for use with chains due to narrow overallwidth offset
P 375-0682 TIRES, 30.5L-32 26PR FS 6,299 $4,005............................Provides width of 3386 mm (133.3")
P 375-0697 TIRES, 30.5L-32 26PR FS, NOAW 6,299 $3,635......................Provides narrow overall width of 3216 mm (126.6"). Notapproved for use with chains due to narrow overallwidth offset
P 374-9855 TIRES, 30.5L-32 20PR FS 6,191 $780............................Provides width of 3386 mm (133.3")
P 375-0691 TIRES, 30.5L-32 20PR FS NOAW 6,191 $750.......................Provides narrow overall width of 3216 mm (126.6"). Notapproved for use with chains due to narrow overallwidth offset
FIRESTONE TIRES (Tubes NOT Included)
C 457-5772 TIRES, 35.5L-32 20PR FS 7,405 $9,770............................Provides width of 3703 mm (145.8")Tubes NOT included.CONTACT LAGRANGE FACTORY FOR AVAILABILITY
C 457-5774 TIRES, 35.5L-32 20PR FS NOAW 7,405 $9,690.......................Provides narrow overall width of 3533 mm (139.1")Tubes NOT included.Not approved for use with chains due to narrowoverall width offsetCONTACT LAGRANGE FACTORY FOR AVAILABILITY
C 457-5768 TIRES, 30.5L-32 20PR FS 6,020 $-1,275............................Provides width of 3386 mm (133.3")Tubes NOT included.CONTACT LAGRANGE FACTORY FOR AVAILABILITY
C 457-5770 TIRES, 30.5L-32 20PR FS NOAW 6,020 $-1,305.......................Provides narrow overall width of 3216 mm (126.6")Tubes NOT included.Not approved for use with chains due to narrowoverall width offset.CONTACT LAGRANGE FACTORY FOR AVAILABILITY
PRIMEX TIRES (Tubes ARE Included)
C 426-1333 TIRES, 35.5L-32 20PR PM 7,575 $9,000............................Provides width of 3703 mm (145.8")CONTACT LAGRANGE FACTORY FOR AVAILABILITY
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 545D-007
CATERPILLAR MACHINE PRICE LIST 545DREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
TIRES, RIMS, & WHEELS (CONT.)
PRIMEX TIRES (Tubes ARE Included) (Cont.)
C 426-1329 TIRES, 35.5L-32 20PR PM, NOAW 7,575 $8,920......................Provides narrow overall width of 3533 mm (139.1"). Notapproved for use with chains due to narrow overallwidth offset.CONTACT LAGRANGE FACTORY FOR AVAILABILITY
C 426-1325 TIRES, 30.5L-32 20PR PM 6,191 $-1,355............................Provides width of 3386 mm (133.3")CONTACT LAGRANGE FACTORY FOR AVAILABILITY
C 426-1317 TIRES, 30.5L-32 20PR PM, NOAW 6,191 $-1,385......................Provides narrow overall width of 3216 mm (126.6"). Notapproved for use with chains due to narrow overallwith offset.CONTACT LAGRANGE FACTORY FOR AVAILABILITY
NO RIMS -TIRES
P 174-7607 TIRES, ALLOWANCE FOR OMISSION 0 $-17,770........................Omits tires and rims.
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 545D-008
CATERPILLAR MACHINE PRICE LIST 545DREF Ship Weight List Price
USE NO. lbs At FactoryOPTIONAL ATTACHMENTS
OTHER ATTACHMENTS
STARTING AIDS
P 367-4974 RECEPTACLE, JUMP START 2 $283...............................Includes: Remote mounted battery jump start posts; Does notrequire special jump start cable
P 374-3425 STARTING, COLD WEATHER 26 $585.............................Includes: Mounting brackets; Ether hoses and lines; Ethercanister NOT includedThe ether bottle is available seperately from Parts Distribution
OTHER
P 378-9922 LIGHTS, LED WORKING 18 $1,040.................................Includes: 8 LED lights (2 front, 4 sides, 2 rear) in additionto the 4 standard halogen lights (2 front, 2 rear)
L 375-2729 WIPERS, FRONT AND REAR 39 $690..............................Includes: Single wiper on front window and 2 wipers onrear windows with washer; Single speed
L 371-3449 STEERING, SECONDARY 84 $3,055................................Includes: Electric powered secondary steering pump
PACKING
MISCELLANEOUS
0P-0058 PACK, MISC SHIPMENTS $153 NET.............................................Required when ordering miscellaneous materialwithout ordering a machine.
FIELD INSTALLED ATTACHMENTS
Available for MISC orders only.
Use 0P-3514 for TOP LEVEL and 0P-0058 for PACKING.
Kits must be ordered NOT-INSTALLED.
No returns on Kit components or for parts removed.
C 472-0339 KIT, SCREENS, WINDOW & WIPER 350 $2,365 NI........................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Includes: Additional swing open screens for the 3 rearwindows protecting windows and optional wipers; REQUIRESGLASS TO REMAIN INSTALLED AND IS NOT CERTIFIED FOROPERATOR PROTECTION WITHOUT GLASS INSTALLED
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 545D-009
CATERPILLAR MACHINE PRICE LIST 553C553C WHEEL FELLER BUNCHER Ship Weight List PriceLAGRANGE, GA, USA lbs At Factory
Standard Equipment:
POWERTRAINEngine, CAT C6.6 with ACERT TechnologyEPA/ARB Tier 3 Certified EngineEU Stage IIIA Certified EngineFuel priming pump, electric
Air PrecleanerAir Cleaner, 2-stageCooling, cross-flow system with side byside cores and integrated airconditioner condenser
Reversing cooling fan, hydraulicallydriven on demand
Hydrostatic drive hydraulic system2 Speed transmission, manually shiftedfor working and travel range
Heavy Duty Axles, CAT inboard planetaryapproved for odd size dual tires up to30.5 x 32 with 24.5 x 32 and wide tiresup to 73 x 44
Front differential lock, momentarycontrol
Rear differential lock, on/off controlFour-wheel enclosed disc service brakesDriveshafts, heavy duty and lubricatedUniversal joints, lubed for lifeParking brake, hydraulically released,spring applied
Fuel tank, high capacity
HYDRAULICSPowerDirect Plus SystemLoad Sense HydraulicsPumps, variable displacement main,attachment, hydrostatic, and fan
Main control valve, high performancemultifunctioning
Spin on filters, dual full inline returnCAT ToughGuard hoses
Main Disconnect SwitchStarter, electric, heavy dutyStarting and charging systemDiagnostic connectorHorn, warningProduct Link, ReadyIQAN MD3 full function control systemwith display
OPERATOR ENVIRONMENTEnclosed cab, OPS/FOPS/ROPS certifiedWindshield, reverse slope 3-pieceHVAC, high capacity systemWater tank, pressurizedSeat, air suspension with harnessseat belt
Headliner with dome lightFloormat, non-permeable and removableMirror, rear view24V to 12V converterPower ports, 12 volt (2)Beverage holders (2)Electro-hydraulic machine controlsAdvanced Operator ControlsOperator control adjustabilityTerrain Selection ModeCreep ModeRoad Steer Mode
Computerized diagnostics and monitoringEngine specific, quick accessinformation page including hours,coolant temperature, oil pressure,battery voltage, and speed
Hydraulic system specific, quickaccess information page includingattachment and auxiliary pumppressures, oil temperature, andfilter restriction information
Supersedes Subject to change without notice Effective 12FEB2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 553C-001
CATERPILLAR MACHINE PRICE LIST 553C553C WHEEL FELLER BUNCHER Ship Weight List PriceLAGRANGE, GA, USA lbs At Factory
OTHER STANDARD EQUIPMENTHeavy Duty Frames, double walled boxsection front and rear
Center Hitch, dual tapered rollerbearing upper and lower
Pins, Chrome plated lift arm and tiltTilt CabPressurized compartments, engine andhydraulic
Fuel fill, ground levelHydraulic oil fill pump, ground levelelectric with quick coupler
Test ports, remote mounted bankAccess panels, hinged or removable
Supersedes Subject to change without notice Effective 12FEB2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 553C-002
CATERPILLAR MACHINE PRICE LIST 553C553C WHEEL FELLER BUNCHER Ship Weight List PriceLAGRANGE, GA, USA lbs At Factory
375-1135 553C WHEEL FELLER BUNCHER 25,979 $262,360...........................174 hp/110 inch wheelbase
0P-2818 553C MISC MATERIAL 0 NC......................................Use this as the top level reference number when orderingmiscellaneous material without ordering a machine.
Supersedes Subject to change without notice Effective 12FEB2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 553C-003
CATERPILLAR MACHINE PRICE LIST 553CREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
NOTE
One item must be selected from each categoryin the MANDATORY ATTACHMENT section of this price list.
POWERTRAIN
Engine
L 388-1878 ENG AR-TIER 3 CERTIFIED FLEX 0 NC............................FOR USE WITH: 553C machines sold into Tier 4
regulated countries
ELECTRICAL
PRODUCT LINK (Must Select One)Product Link enables the remote transmission of information
about the location, operation, and condition of yourequipment. Efficiently and effectively monitor performanceof your assets to help keep your jobs on schedule, maintainequipment condition, and reduce the costs of owning andoperating your fleet. Availability varies by country.Please contact your Cat marketing representative with questions.
L 351-9955 PRODUCT LINK, SATELLITE PL321 19 NC .........................Satellite Product Link uses a satellite network fortransmission of asset information including location,utilization and condition. For use in areas withpoor or no cellular coverage.Data from the Product Link is displayed in VisionLink.
OPERATOR ENVIRONMENT
Steering Control Selection
L 455-3862 STEERING, JOYSTICK GATHER ARM 195 NC......................Includes: Air suspension seat with harness seat belt;Left joystick with steering, gather arm control,all open attachment function, and creep controls;Right joystick with lift, tilt, bunching controland momentary front differential
L 455-3863 STEERING, JOYSTICK FOOT PEDAL 195 $590.......................Includes: Air suspension seat with harness seat belt;Left joystick with steering, all open attachmentfunction, and creep controls; Right joystick withlift, tilt, bunching control and momentary frontdifferential control; Left foot pedals for gatherarm control.
Supersedes Subject to change without notice Effective 12FEB2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 553C-004
CATERPILLAR MACHINE PRICE LIST 553CREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
TIRES, RIMS, AND WHEELS
Due to industry-wide tire availability limitations, tire brand andtype cannot be guaranteed. Every effort will be made to satisfy yourtire choice. However, if the tire type cannot be supplied we willcontact the dealer to propose alternatives. The dealer needs to choosebetween an alternative tire or a "rims only" option (where available)within 72 hours. If no response is provided by the deadline, the orderwill default to the alternative tire and will be changed at thatpoint. As a consequence of a possible tire change, the total machineprice will be decreased or increased depending on the price of the newtire.
FIRESTONE TIRES
P 375-1128 TIRES,30.5L-32 20PR FS 2X RING 6,480 $3,980......................Includes mounting plate for 24.5L-32 outer duals to be attachedProvides width of 2966 mm (116.8")
P 375-1126 TIRES, 67-34 14 PR FS 6,080 $2,070..............................Provides standard width of 3222 mm (126.9")
P 375-1123 TIRES, 30.5L-32 20PR FS, NOAW 6,080 $-1,760......................Provides narrow overall width of 2980 mm (117.3")
P 375-1132 TIRES, 30.5L-32 20PR FS 6,080 $-1,760............................Provides width of 3140 mm (123.6")
P 375-1124 TIRES, 28L-26 16PR FS, NOAW 4,360 $-8,550.......................Provides narrow overall width of 2793 mm (110.0")
P 375-1125 TIRES, 28L-26 16PR FS 4,360 $-8,550..............................Provides standard width of 2920 mm (115.0")
C 375-1127 TIRES, 24.5L-32 16PR FS, NOAW 4,320 $-8,780......................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides narrow overall width of 2801 mm (110.3")
PRIMEX TIRES
C 389-0389 TIRES, 67-34 20PR PM 6,080 $11,130..............................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides standard width of 3222 mm (126.9")
C 387-5432 TIRES, 30.5L-32 20PR PM, NOAW 6,080 $-4,945......................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides narrow overall width of 2980 mm (117.3")
C 387-5431 TIRES, 30.5L-32 20PR PM 6,080 $-4,945............................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides width of 3140 mm (123.6")
C 375-1097 TIRES, 28L-26 20PR PM, NOAW 4,360 $-7,000.......................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides narrow overall width of 2793 mm (110.0")
C 375-1098 TIRES, 28L-26 20PR PM 4,360 $-7,000.............................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides standard width of 2920 mm (115.0")
Supersedes Subject to change without notice Effective 12FEB2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 553C-005
CATERPILLAR MACHINE PRICE LIST 553CREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
TIRES, RIMS, AND WHEELS (CONT.)
NO RIMS-TIRES
P 355-4173 TIRES, ALLOWANCE FOR OMISSION 0 $-19,100........................Omits tires and rims.
OTHER ATTACHMENTS
Radio
L 357-8159 RADIO, READY PACKAGE 0 NC................................Includes speakers, AM/FM Antennae and blank cover in headliner.
P 357-8158 RADIO, AM/FM/CD/XM-SATELLITE 3 $1,025.........................Includes Digital AM/FM/Sirius Satellite RadioReceiver with CD player, USB input, auxillary input;Speakers; AM/FM antennae; Sirius satellite radio antennawith protective cover (Subscription Required forSirius Service).
WORK TOOLS
Felling Heads
P 376-5449 SH-56B BUNCHING SAW 5,870 $71,740.............................5,870 $71,740 NI
Single Cut Capacity 53.3 cm (21.0");Accumulation Area 0.69 m (7.4 ft )
P 337-5523 SC-57 FELLING SAW 5,841 $71,010................................5,841 $71,010 NI
Single Cut Capacity 57.6 cm (22.7");Accumulation Area 0.47 m (5.1 ft )
P 440-4884 SS-56 FELLING SAW 5,453 $68,240................................5,453 $68,240 NI
Single Cut Capacity 56.0 cm (22.0");Directional Fell Capacity 76.2 cm (30.0");Accumulation Area 0.37 m (4.0 ft )
P 434-4990 OMISSION, HEAD 0 NC......................................
Disc Selection
Must select one when ordering any Disc Saw Head.
P 372-3922 BUNCHING DISC, INLINE 1 PIECE 743 $1,285.........................Includes 18 x 2.25" bolt on shankless carbide teeth.REQUIRES: 376-5449 SH-56B Bunching Saw
P 385-9331 BUNCHING DISC, STAGGERED 719 NC...........................Includes 16 x 1.875" bolt on shankless carbide teethstaggered high and low providing overall cut of 2.25".REQUIRES: 376-5449 SH-56B Bunching Saw
P 330-4903 FELLING DISC, INLINE 1 PIECE 829 $840...........................Includes 16 x 2.25" bolt on shankless carbide teeth.REQUIRES: 337-5523 SC-57 Felling Saw -OR-
440-4884 SS-56 Felling Saw
Supersedes Subject to change without notice Effective 12FEB2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 553C-006
CATERPILLAR MACHINE PRICE LIST 553CREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
WORK TOOLS (CONT.)
Disc Selection (Cont.)
P 351-0511 FELLING DISC, STAGGERED 757 NC.............................Includes 16 x 1.875" bolt on shankless carbide teethstaggard high and low providing overall cut of 2.25".REQUIRES: 337-5523 SC-57 Felling Saw -OR-
440-4884 SS-56 Felling Saw
Mount Selection
Must select one when ordering any Disc Saw Head.
P 384-8349 C SERIES MOUNTS, SH-56B 272 NC............................Includes tilt links, hoses, pins, wire harness, andother miscellaneous installation hardware.REQUIRES: 376-5449 SH-56B Bunching Saw
P 379-4357 C SERIES MOUNTS, SC-57 430 NC.............................Includes tilt links, hoses, pins, wire harness, andother miscellaneous installation hardware.REQUIRES: 337-5523 SC-57 Felling Saw
P 386-1383 C SERIES MOUNTS, SS-56 272 NC.............................Includes tilt links, hoses, pins, wire harness, andother miscellaneous installation hardware.REQUIRES: 440-4884 SS-56 Felling Saw
Starter, electric, heavy dutyStarting and charging systemDiagnostic connectorHorn, warning
OPERATOR ENVIRONMENTPower port, 12VConverter, 24V to 12VBeverage holders (2)Headliner with dome lightFloormat, non permeable and removableMirror, rear viewRadio, AM/FM/CD/Sirius-SatelliteComputerized Monitoring System
Swing Out PanelAir to air aftercoolerAir conditioner condenser
Reversing cooling fan, hydraulicallydriven on demand
Transmission, countershaftpowershift (6F/3R)
Lock-up torque converterLubed for life driveline slipjoint anduniversal joints
Axles, heavy duty Cat inboard planetaryapproved for odd sized dual tires up to30.5-32 inner and 24.5-32 outer andsingle wide tires up to 73-44with chains
Differential locks, independent frontand rear
Four-wheel enclosed disc service brakesParking brake, hydraulically released,spring applied
Fuel tank, high capacity
OTHER STANDARD EQUIPMENTAccess panels, hinged or removableArticulation lock linkCenter Hitch, dual tapered rollerbearing upper and lower
Ecology drains (engine oil, enginecoolant, hyd tank, fuel tank, axles,transmission)
Fuel fill, ground level
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 555D-001
CATERPILLAR MACHINE PRICE LIST 555D555D WHEEL SKIDDER Ship Weight List PriceLAGRANGE, GA, USA lbs At Factory
OTHER STANDARD EQUIPMENT (CONT.)
Frames, heavy dutyLimb risers, heavy dutySegregated compartments, engine/CEMand cooling
HYDRAULICSLoad Sense HydraulicsPumps, variable displacement mainand fan
Main control valve, high performanceand multifunctioning
Filter, in-tank returnCAT ToughGuard hoses
ANTIFREEZEIncludes 50% concentration of extendedlife coolant with freeze protection to-36C (-33F) and anti-boil protectionto 106C (223F)
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 555D-002
CATERPILLAR MACHINE PRICE LIST 555D555D WHEEL SKIDDER Ship Weight List PriceLAGRANGE, GA, USA lbs At Factory
366-4835 555D SKIDDER 22,548 $319,920.......................................275 hp/160.3 inch wheelbase
0P-3515 555D MISC MATERIAL 0 NC......................................Use this as the top level reference number when orderingmiscellaneous material without ordering a machine.
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 555D-003
CATERPILLAR MACHINE PRICE LIST 555DREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
ARCH/BOOM AND WINCH
ARCH/BOOM (Must Select)
L 390-7507 ARCH BOOM & GRAPPLE, DF 7,704 $66,590..........................Includes: Dual function arch and boom; 2.04 sq.m(22.0 sq.ft) continuous rotation grappleREQUIRES: 426-4630 Frame, DF Rear, No Fender
CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Includes: 6 section control valve with 4 open sectionscontrolled by joystick in the cab, 5th section to controla retrieval winch and 6th section to control the blade.REQUIRES: 454-8494 Cab, Encl GR W/whl Steering
CANNOT BE USED WITH: 373-4620 Winch, Retrieval Ready373-4619 Winch, Retrieval
WINCH (Must Select One)
L 373-4620 WINCH, RETRIEVAL READY 0 NC...............................Includes: Universal winch mounting plate with additional treadplate; Bolt on arch guard; Compatible with RetrievalWinch not installed kitCANNOT BE USED WITH: 476-6802 Industrial Arrangement
L 373-4619 WINCH, RETRIEVAL 1,754 $17,140.................................Includes: Hydraulic retrieval winch; Fairleadroller subassemblyCANNOT BE USED WITH: 476-6802 Industrial Arrangement
FRAME
REAR FRAME (Must Select One)
L 426-4630 FRAME, DF REAR NO FENDER 3,149 NC.........................Includes: Dual function rear frame; For applications whererear tire protection is not requiredREQUIRES: 390-7507 Arch Boom & Grapple, DF -OR-
Includes: Dual function rear frame with grapple fenders;For applications where rear tire protection is requiredREQUIRES: 390-7507 Arch Boom & Grapple, DF -OR-
476-6802 Industrial Arrangement
OPERATOR ENVIRONMENT
CAB (Must Select)
L 454-8494 CAB, ENCL GR W/WHL STEERING 2,818 NC......................Includes: Enclosed ROPS, FOPS, and OPS certified cab; Highperformance HVAC system; Air suspension high back seat withlap seat belt; 30 degree Seat rotation with positions at 0, 10,20, and 30 degrees; Telescopic and tilting steering wheel;Seat mounted electrohydraulic grapple joystick with arch/boom andgrapple controls; Single position throttle and brake pedals
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 555D-004
CATERPILLAR MACHINE PRICE LIST 555DREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
OPERATOR ENVIRONMENT (CONT.)
SCREENS (Must Select One)
L 435-4324 SCREENS, READY ONLY 18 NC................................Includes: Grab handle/Window retainer;Mounting positions ready for Window and Wiper Screens
L 378-9921 SCREENS, WINDOW & WIPER 176 $1,110............................Includes: Additional swing open screens for the 3 rear windowsprotecting windows and optional wipers; REQUIRES GLASS TOREMAIN INSTALLED AND IS NOT CERTIFIED FOR OPERATORPROTECTION WITHOUT GLASS INSTALLED
WATER TANKS
(Must Select One)
L 378-9923 WATER TANK, READY ONLY 109 NC............................Includes: Reinforced plate to cover the in-roof watertank position
L 375-2731 WATER TANK 220 $2,370.......................................Includes: Integrated in-roof water tank; Cab located hosewith nozzle; Pressure valve with gauge
BLADES/MOLDBOARDS
(Must Select One)
L 388-0457 BLADE, STANDARD 2,346 $2,490................................Includes: Overall width of 2678 mm (105.4") for standardtire coverage; Replaceable cutting edges
L 385-5012 BLADE, WIDE 2,561 $3,140.....................................Includes: Overall width of 3138 mm (123.5") for standardtire coverage; Replaceable cutting edges
C 476-6810 BLADE, OMISSION 0 NC.....................................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Includes: Lines routings from the main control valve to thefront frame and capped near the blade mounting location.
SERVICE INSTRUCTIONS
DECAL PACKAGE & LUBE GROUP (Must Select One)
426-4620 INSTRUCTIONS, ANSI 0 NC ...................................Includes: Standard ANSI decal package required for all USAshipments
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 555D-005
CATERPILLAR MACHINE PRICE LIST 555DREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
TIRES, RIMS, & WHEELS
Due to industry-wide tire availability limitations, tire brand andtype cannot be guaranteed. Every effort will be made to satisfy yourtire choice. However, if the tire type cannot be supplied we willcontact the dealer to propose alternatives. The dealer needs to choosebetween an alternative tire or a "rims only" option (where available)within 72 hours. If no response is provided by the deadline, the orderwill default to the alternative tire and will be changed at thatpoint. As a consequence of a possible tire change, the total machineprice will be decreased or increased depending on the price of the newtire.
FIRESTONE TIRES (Tubes ARE Included)
P 375-0679 TIRES, 35.5L-32 24PR FS 7,807 $17,710............................Provides width of 3703 mm (145.8")
P 375-2706 TIRES, 35.5L-32 24PR FS, NOAW 7,807 $17,640......................Provides narrow overall width of 3533 mm (139.1"). Notapproved for use with chains due to narrow overallwidth offset
P 375-0704 TIRES, 35.5L-32 20PR FS 7,575 $12,130............................Provides width of 3703 mm (145.8")
P 375-0706 TIRES, 35.5L-32 20PR FS, NOAW 7,575 $12,050......................Provides narrow overall width of 3533 mm (139.1"). Notapproved for use with chains due to narrow overallwidth offset
P 375-0694 TIRES,30.5L-32 26PR FS 2X RING 6,951 $9,550......................Includes mounting plate for 24.5L-32 outer duals to beattached. Provides narrow overall width of 3216 mm (126.6").Not approved for use with chains due to narrow overallwidth offset
P 375-0685 TIRES,30.5L-32 20PR FS 2X RING 6,843 $5,820......................Includes mounting plate for 24.5L-32 outer duals to beattached. Provides narrow overall width of 3216 mm (126.6").Not approved for use with chains due to narrow overallwidth offset
P 375-0682 TIRES, 30.5L-32 26PR FS 6,299 $4,005............................Provides width of 3386 mm (133.3")
P 375-0697 TIRES, 30.5L-32 26PR FS, NOAW 6,299 $3,635......................Provides narrow overall width of 3216 mm (126.6"). Notapproved for use with chains due to narrow overallwidth offset
PRIMEX TIRES (Tubes ARE Included)
C 426-1333 TIRES, 35.5L-32 20PR PM 7,575 $9,000............................Provides width of 3703 mm (145.8")CONTACT LAGRANGE FACTORY FOR AVAILABILITY
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 555D-006
CATERPILLAR MACHINE PRICE LIST 555DREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
TIRES, RIMS, & WHEELS (CONT.)
PRIMEX TIRES (Tubes ARE Included) (Cont.)
C 426-1329 TIRES, 35.5L-32 20PR PM, NOAW 7,575 $8,920......................Provides narrow overall width of 3533 mm (139.1"). Notapproved for use with chains due to narrow overallwidth offset.CONTACT LAGRANGE FACTORY FOR AVAILABILITY
NO RIMS -TIRES
P 174-7607 TIRES, ALLOWANCE FOR OMISSION 0 $-17,770........................Omits tires and rims.
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 555D-007
CATERPILLAR MACHINE PRICE LIST 555DREF Ship Weight List Price
USE NO. lbs At FactoryOPTIONAL ATTACHMENTS
OTHER ATTACHMENTS
STARTING AIDS
P 367-4974 RECEPTACLE, JUMP START 2 $283...............................Includes: Remote mounted battery jump start posts; Does notrequire special jump start cable
P 374-3425 STARTING, COLD WEATHER 26 $585.............................Includes: Mounting brackets; Ether hoses and lines; Ethercanister NOT includedThe ether bottle is available seperately from Parts Distribution
OTHER
P 378-9922 LIGHTS, LED WORKING 18 $1,040.................................Includes: 8 LED lights (2 front, 4 sides, 2 rear) in additionto the 4 standard halogen lights (2 front, 2 rear)
L 375-2729 WIPERS, FRONT AND REAR 39 $690..............................Includes: Single wiper on front window and 2 wipers onrear windows with washer; Single speed
L 371-3449 STEERING, SECONDARY 84 $3,055................................Includes: Electric powered secondary steering pump
PACKING
MISCELLANEOUS
0P-0058 PACK, MISC SHIPMENTS $153 NET.............................................Required when ordering miscellaneous materialwithout ordering a machine.
FIELD INSTALLED ATTACHMENTS
Available for MISC orders only.
Use 0P-3515 for TOP LEVEL and 0P-0058 for PACKING.
Kits must be ordered NOT-INSTALLED.
No returns on Kit components or for parts removed.
C 472-0339 KIT, SCREENS, WINDOW & WIPER 350 $2,365 NI........................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Includes: Additional swing open screens for the 3 rearwindows protecting windows and optional wipers; REQUIRESGLASS TO REMAIN INSTALLED AND IS NOT CERTIFIED FOROPERATOR PROTECTION WITHOUT GLASS INSTALLED
Supersedes Subject to change without notice Effective 21MAR2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 555D-008
CATERPILLAR MACHINE PRICE LIST 563C563C WHEEL FELLER BUNCHER Ship Weight List PriceLAGRANGE, GA, USA lbs At Factory
Standard Equipment:
POWERTRAINEngine, CAT C7 with ACERT TechnologyEPA/ARB Tier 4 Interim andEU Stage IIIB Certified Engine with CATClean Emissions Module (CEM)Fuel priming pump, electric
Air PrecleanerAir Cleaner, 2-stageCooling, cross-flow system with side byside cores and integrated airconditioner condenser and fuel cooler
Reversing cooling fan, hydraulicallydriven on demand
Hydrostatic drive hydraulic system2 Speed transmission, manually shiftedfor working and travel range
Heavy Duty Axles, CAT inboard planetaryapproved for odd size dual tires up to30.5 x 32 with 24.5 x 32 and wide tiresup to 73 x 44
Front differential lock, momentarycontrol
Rear differential lock, on/off controlFour-wheel enclosed disc service brakesDriveshafts, heavy duty and lubricatedUniversal joints, lubed for lifeParking brake, hydraulically released,spring applied
Fuel tank, high capacity
HYDRAULICSPowerDirect Plus SystemLoad Sense HydraulicsPumps, variable displacement main,attachment, hydrostatic, and fan
Main control valve, high performancemultifunctioning
Spin on filters, dual full inline returnCAT ToughGuard hoses
Main Disconnect SwitchStarter, electric, heavy dutyStarting and charging systemDiagnostic connectorHorn, warningProduct Link, ReadyIQAN MD3 full function control systemwith display
OPERATOR ENVIRONMENTEnclosed cab, OPS/FOPS/ROPS certifiedWindshield, reverse slope 3-pieceHVAC, high capacity systemWater tank, pressurizedSeat, air suspension with harnessseat belt
Headliner with dome lightFloormat, non-permeable and removableMirror, rear view24V to 12V converterPower ports, 12 volt (2)Beverage holders (2)Electro-hydraulic machine controlsAdvanced Operator ControlsOperator control adjustabilityTerrain Selection ModeCreep ModeRoad Steer Mode
Computerized diagnostics and monitoringEngine specific, quick accessinformation page including hours,coolant temperature, oil pressure,battery voltage, and speed
Hydraulic system specific, quickaccess information page includingattachment and auxiliary pumppressures, oil temperature, andfilter restriction information
Supersedes Subject to change without notice Effective 12FEB2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 563C-001
CATERPILLAR MACHINE PRICE LIST 563C563C WHEEL FELLER BUNCHER Ship Weight List PriceLAGRANGE, GA, USA lbs At Factory
OPERATOR ENVIRONMENT (CONT.)
Hydraulic system fault code logMachine fault code log
OTHER STANDARD EQUIPMENTHeavy Duty Frames, double walled boxsection front and rear
Center Hitch, dual tapered rollerbearing upper and lower
Pins, Chrome plated lift arm and tiltTilt CabPressurized compartments, engine,hydraulic, and CEM
Fuel fill, ground levelHydraulic oil fill pump, ground levelelectric with quick coupler
Test ports, remote mounted bankAccess panels, hinged or removable
Supersedes Subject to change without notice Effective 12FEB2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 563C-002
CATERPILLAR MACHINE PRICE LIST 563C563C WHEEL FELLER BUNCHER Ship Weight List PriceLAGRANGE, GA, USA lbs At Factory
368-4290 563C WHEEL FELLER BUNCHER 26,479 $277,030...........................203 hp/110 inch wheelbase
0P-2819 563C MISC MATERIAL 0 NC......................................Use this as the top level reference number when orderingmiscellaneous material without ordering a machine.
Supersedes Subject to change without notice Effective 12FEB2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 563C-003
CATERPILLAR MACHINE PRICE LIST 563CREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
NOTE
One item must be selected from each categoryin the MANDATORY ATTACHMENT section of this price list.
ELECTRICAL
PRODUCT LINK (Must Select One)Product Link enables the remote transmission of information
about the location, operation, and condition of yourequipment. Efficiently and effectively monitor performanceof your assets to help keep your jobs on schedule, maintainequipment condition, and reduce the costs of owning andoperating your fleet. Availability varies by country.Please contact your Cat marketing representative with questions.
L 351-9955 PRODUCT LINK, SATELLITE PL321 19 NC .........................Satellite Product Link uses a satellite network fortransmission of asset information including location,utilization and condition. For use in areas withpoor or no cellular coverage.Data from the Product Link is displayed in VisionLink.
OPERATOR ENVIRONMENT
Steering Control Selection
L 455-3862 STEERING, JOYSTICK GATHER ARM 195 NC......................Includes: Air suspension seat with harness seat belt;Left joystick with steering, gather arm control,all open attachment function, and creep controls;Right joystick with lift, tilt, bunching controland momentary front differential
L 455-3863 STEERING, JOYSTICK FOOT PEDAL 195 $590.......................Includes: Air suspension seat with harness seat belt;Left joystick with steering, all open attachmentfunction, and creep controls; Right joystick withlift, tilt, bunching control and momentary frontdifferential control; Left foot pedals for gatherarm control.
Supersedes Subject to change without notice Effective 12FEB2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 563C-004
CATERPILLAR MACHINE PRICE LIST 563CREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
TIRES, RIMS, AND WHEELS
Due to industry-wide tire availability limitations, tire brand andtype cannot be guaranteed. Every effort will be made to satisfy yourtire choice. However, if the tire type cannot be supplied we willcontact the dealer to propose alternatives. The dealer needs to choosebetween an alternative tire or a "rims only" option (where available)within 72 hours. If no response is provided by the deadline, the orderwill default to the alternative tire and will be changed at thatpoint. As a consequence of a possible tire change, the total machineprice will be decreased or increased depending on the price of the newtire.
FIRESTONE TIRES
P 375-1128 TIRES,30.5L-32 20PR FS 2X RING 6,480 $3,980......................Includes mounting plate for 24.5L-32 outer duals to be attachedProvides width of 2966 mm (116.8")
P 375-1126 TIRES, 67-34 14 PR FS 6,080 $2,070..............................Provides standard width of 3222 mm (126.9")
P 375-1123 TIRES, 30.5L-32 20PR FS, NOAW 6,080 $-1,760......................Provides narrow overall width of 2980 mm (117.3")
P 375-1132 TIRES, 30.5L-32 20PR FS 6,080 $-1,760............................Provides width of 3140 mm (123.6")
P 375-1124 TIRES, 28L-26 16PR FS, NOAW 4,360 $-8,550.......................Provides narrow overall width of 2793 mm (110.0")
P 375-1125 TIRES, 28L-26 16PR FS 4,360 $-8,550..............................Provides standard width of 2920 mm (115.0")
C 375-1127 TIRES, 24.5L-32 16PR FS, NOAW 4,320 $-8,780......................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides narrow overall width of 2801 mm (110.3")
PRIMEX TIRES
C 389-0389 TIRES, 67-34 20PR PM 6,080 $11,130..............................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides standard width of 3222 mm (126.9")
C 387-5432 TIRES, 30.5L-32 20PR PM, NOAW 6,080 $-4,945......................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides narrow overall width of 2980 mm (117.3")
C 387-5431 TIRES, 30.5L-32 20PR PM 6,080 $-4,945............................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides width of 3140 mm (123.6")
C 375-1097 TIRES, 28L-26 20PR PM, NOAW 4,360 $-7,000.......................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides narrow overall width of 2793 mm (110.0")
C 375-1098 TIRES, 28L-26 20PR PM 4,360 $-7,000.............................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides standard width of 2920 mm (115.0")
Supersedes Subject to change without notice Effective 12FEB2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 563C-005
CATERPILLAR MACHINE PRICE LIST 563CREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
TIRES, RIMS, AND WHEELS (CONT.)
NO RIMS-TIRES
P 355-4173 TIRES, ALLOWANCE FOR OMISSION 0 $-19,100........................Omits tires and rims.
OTHER ATTACHMENTS
Radio
L 357-8159 RADIO, READY PACKAGE 0 NC................................Includes speakers, AM/FM Antennae and blank cover in headliner.
P 357-8158 RADIO, AM/FM/CD/XM-SATELLITE 3 $1,025.........................Includes Digital AM/FM/Sirius Satellite RadioReceiver with CD player, USB input, auxillary input;Speakers; AM/FM antennae; Sirius satellite radio antennawith protective cover (Subscription Required forSirius Service).
WORK TOOLS
Felling Heads
P 376-5449 SH-56B BUNCHING SAW 5,870 $71,740.............................5,870 $71,740 NI
Single Cut Capacity 53.3 cm (21.0");Accumulation Area 0.69 m (7.4 ft )
P 337-5523 SC-57 FELLING SAW 5,841 $71,010................................5,841 $71,010 NI
Single Cut Capacity 57.6 cm (22.7");Accumulation Area 0.47 m (5.1 ft )
P 440-4884 SS-56 FELLING SAW 5,453 $68,240................................5,453 $68,240 NI
Single Cut Capacity 56.0 cm (22.0");Directional Fell Capacity 76.2 cm (30.0");Accumulation Area 0.37 m (4.0 ft )
P 434-4990 OMISSION, HEAD 0 NC......................................
Disc Selection
Must select one when ordering any Disc Saw Head.
P 372-3922 BUNCHING DISC, INLINE 1 PIECE 743 $1,285.........................Includes 18 x 2.25" bolt on shankless carbide teeth.REQUIRES: 376-5449 SH-56B Bunching Saw
P 385-9331 BUNCHING DISC, STAGGERED 719 NC...........................Includes 16 x 1.875" bolt on shankless carbide teethstaggered high and low providing overall cut of 2.25".REQUIRES: 376-5449 SH-56B Bunching Saw
P 330-4903 FELLING DISC, INLINE 1 PIECE 829 $840...........................Includes 16 x 2.25" bolt on shankless carbide teeth.REQUIRES: 337-5523 SC-57 Felling Saw -OR-
440-4884 SS-56 Felling Saw
Supersedes Subject to change without notice Effective 12FEB2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 563C-006
CATERPILLAR MACHINE PRICE LIST 563CREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
WORK TOOLS (CONT.)
Disc Selection (Cont.)
P 351-0511 FELLING DISC, STAGGERED 757 NC.............................Includes 16 x 1.875" bolt on shankless carbide teethstaggard high and low providing overall cut of 2.25".REQUIRES: 337-5523 SC-57 Felling Saw -OR-
440-4884 SS-56 Felling Saw
Mount Selection
Must select one when ordering any Disc Saw Head.
P 384-8349 C SERIES MOUNTS, SH-56B 272 NC............................Includes tilt links, hoses, pins, wire harness, andother miscellaneous installation hardware.REQUIRES: 376-5449 SH-56B Bunching Saw
P 379-4357 C SERIES MOUNTS, SC-57 430 NC.............................Includes tilt links, hoses, pins, wire harness, andother miscellaneous installation hardware.REQUIRES: 337-5523 SC-57 Felling Saw
P 386-1383 C SERIES MOUNTS, SS-56 272 NC.............................Includes tilt links, hoses, pins, wire harness, andother miscellaneous installation hardware.REQUIRES: 440-4884 SS-56 Felling Saw
Main Disconnect SwitchStarter, electric, heavy dutyStarting and charging systemDiagnostic connectorHorn, warningProduct Link, ReadyIQAN MD3 full function control systemwith display
OPERATOR ENVIRONMENTEnclosed cab, OPS/FOPS/ROPS certifiedWindshield, reverse slope 3-pieceHVAC, high capacity systemWater tank, pressurizedSeat, air suspension with harnessseat belt
Headliner with dome lightFloormat, non-permeable and removableMirror, rear view24V to 12V converterPower ports, 12 volt (2)Beverage holders (2)Electro-hydraulic machine controlsAdvanced Operator ControlsOperator control adjustabilityTerrain Selection ModeCreep ModeRoad Steer Mode
Computerized diagnostics and monitoringEngine specific, quick accessinformation page including hours,coolant temperature, oil pressure,battery voltage, and speed
Hydraulic system specific, quickaccess information page includingattachment and auxiliary pumppressures, oil temperature, andfilter restriction information
Supersedes Subject to change without notice Effective 12FEB2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 573C-001
CATERPILLAR MACHINE PRICE LIST 573C573C WHEEL FELLER BUNCHER Ship Weight List PriceLAGRANGE, GA, USA lbs At Factory
OPERATOR ENVIRONMENT (CONT.)
Hydraulic system fault code logMachine fault code log
OTHER STANDARD EQUIPMENTHeavy Duty Frames, double walled boxsection front and rear
Center Hitch, dual tapered rollerbearing upper and lower
Pins, Chrome plated lift arm and tiltTilt CabPressurized compartments, engine,hydraulic, and CEM
Fuel fill, ground levelHydraulic oil fill pump, ground levelelectric with quick coupler
Test ports, remote mounted bankAccess panels, hinged or removable
Supersedes Subject to change without notice Effective 12FEB2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 573C-002
CATERPILLAR MACHINE PRICE LIST 573C573C WHEEL FELLER BUNCHER Ship Weight List PriceLAGRANGE, GA, USA lbs At Factory
354-1650 573C WHEEL FELLER BUNCHER 27,259 $298,740...........................241 hp/115 inch wheelbase
0P-2820 573C MISC MATERIAL 0 NC......................................Use this as the top level reference number when orderingmiscellaneous material without ordering a machine.
Supersedes Subject to change without notice Effective 12FEB2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 573C-003
CATERPILLAR MACHINE PRICE LIST 573CREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
NOTE
One item must be selected from each categoryin the MANDATORY ATTACHMENT section of this price list.
ELECTRICAL
PRODUCT LINK (Must Select One)Product Link enables the remote transmission of information
about the location, operation, and condition of yourequipment. Efficiently and effectively monitor performanceof your assets to help keep your jobs on schedule, maintainequipment condition, and reduce the costs of owning andoperating your fleet. Availability varies by country.Please contact your Cat marketing representative with questions.
L 351-9955 PRODUCT LINK, SATELLITE PL321 19 NC .........................Satellite Product Link uses a satellite network fortransmission of asset information including location,utilization and condition. For use in areas withpoor or no cellular coverage.Data from the Product Link is displayed in VisionLink.
OPERATOR ENVIRONMENT
Steering Control Selection
L 455-3862 STEERING, JOYSTICK GATHER ARM 195 NC......................Includes: Air suspension seat with harness seat belt;Left joystick with steering, gather arm control,all open attachment function, and creep controls;Right joystick with lift, tilt, bunching controland momentary front differential
L 455-3863 STEERING, JOYSTICK FOOT PEDAL 195 $590.......................Includes: Air suspension seat with harness seat belt;Left joystick with steering, all open attachmentfunction, and creep controls; Right joystick withlift, tilt, bunching control and momentary frontdifferential control; Left foot pedals for gatherarm control.
Supersedes Subject to change without notice Effective 12FEB2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 573C-004
CATERPILLAR MACHINE PRICE LIST 573CREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
TIRES, RIMS, AND WHEELS
Due to industry-wide tire availability limitations, tire brand andtype cannot be guaranteed. Every effort will be made to satisfy yourtire choice. However, if the tire type cannot be supplied we willcontact the dealer to propose alternatives. The dealer needs to choosebetween an alternative tire or a "rims only" option (where available)within 72 hours. If no response is provided by the deadline, the orderwill default to the alternative tire and will be changed at thatpoint. As a consequence of a possible tire change, the total machineprice will be decreased or increased depending on the price of the newtire.
FIRESTONE TIRES
P 355-4184 TIRES,30.5L-32 20PR FS 2X RING 6,480 $3,980......................Includes mounting plate for 24.5L-32 outer duals to be attachedProvides width of 2966 mm (116.8")
P 355-4180 TIRES, 67-34 14 PR FS 6,080 $2,070..............................Provides standard width of 3222 mm (126.9")
P 355-4174 TIRES, 30.5L-32 20PR FS, NOAW 6,080 $-1,760......................Provides narrow overall width of 2980 mm (117.3")
P 364-4714 TIRES, 30.5L-32 20PR FS 6,080 $-1,760............................Provides width of 3140 mm (123.6")
P 375-1124 TIRES, 28L-26 16PR FS, NOAW 4,360 $-8,550.......................Provides narrow overall width of 2793 mm (110.0")
P 375-1125 TIRES, 28L-26 16PR FS 4,360 $-8,550..............................Provides standard width of 2920 mm (115.0")
C 355-4182 TIRES, 24.5L-32 16PR FS, NOAW 4,320 $-8,780......................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides narrow overall width of 2801 mm (110.3")
PRIMEX TIRES
C 375-1103 TIRES, 67-34 20PR PM 6,080 $11,130..............................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides standard width of 3222 mm (126.9")
C 387-5430 TIRES, 30.5L-32 20PR PM, NOAW 6,080 $-4,945......................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides narrow overall width of 2980 mm (117.3")
C 387-5429 TIRES, 30.5L-32 20PR PM 6,080 $-4,945............................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides width of 3140 mm (123.6")
C 375-1097 TIRES, 28L-26 20PR PM, NOAW 4,360 $-7,000.......................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides narrow overall width of 2793 mm (110.0")
C 375-1098 TIRES, 28L-26 20PR PM 4,360 $-7,000.............................CONTACT LAGRANGE FACTORY FOR AVAILABILITY.Provides standard width of 2920 mm (115.0")
Supersedes Subject to change without notice Effective 12FEB2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 573C-005
CATERPILLAR MACHINE PRICE LIST 573CREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
TIRES, RIMS, AND WHEELS (CONT.)
NO RIMS-TIRES
P 355-4173 TIRES, ALLOWANCE FOR OMISSION 0 $-19,100........................Omits tires and rims.
OTHER ATTACHMENTS
Radio
L 357-8159 RADIO, READY PACKAGE 0 NC................................Includes speakers, AM/FM Antennae and blank cover in headliner.
P 357-8158 RADIO, AM/FM/CD/XM-SATELLITE 3 $1,025.........................Includes Digital AM/FM/Sirius Satellite RadioReceiver with CD player, USB input, auxillary input;Speakers; AM/FM antennae; Sirius satellite radio antennawith protective cover (Subscription Required forSirius Service).
WORK TOOLS
Felling Heads
P 376-5449 SH-56B BUNCHING SAW 5,870 $71,740.............................5,870 $71,740 NI
Single Cut Capacity 53.3 cm (21.0");Accumulation Area 0.69 m (7.4 ft )
P 337-5523 SC-57 FELLING SAW 5,841 $71,010................................5,841 $71,010 NI
Single Cut Capacity 57.6 cm (22.7");Accumulation Area 0.47 m (5.1 ft )
P 440-4884 SS-56 FELLING SAW 5,453 $68,240................................5,453 $68,240 NI
Single Cut Capacity 56.0 cm (22.0");Directional Fell Capacity 76.2 cm (30.0");Accumulation Area 0.37 m (4.0 ft )
P 434-4990 OMISSION, HEAD 0 NC......................................
Disc Selection
Must select one when ordering any Disc Saw Head.
P 372-3922 BUNCHING DISC, INLINE 1 PIECE 743 $1,285.........................Includes 18 x 2.25" bolt on shankless carbide teeth.REQUIRES: 376-5449 SH-56B Bunching Saw
P 385-9331 BUNCHING DISC, STAGGERED 719 NC...........................Includes 16 x 1.875" bolt on shankless carbide teethstaggered high and low providing overall cut of 2.25".REQUIRES: 376-5449 SH-56B Bunching Saw
P 330-4903 FELLING DISC, INLINE 1 PIECE 829 $840...........................Includes 16 x 2.25" bolt on shankless carbide teeth.REQUIRES: 337-5523 SC-57 Felling Saw -OR-
440-4884 SS-56 Felling Saw
Supersedes Subject to change without notice Effective 12FEB2015Printed in USA Caterpillar: Confidential Green
US-A D U. S. DOLLAR CURRENCY 573C-006
CATERPILLAR MACHINE PRICE LIST 573CREF Ship Weight List Price
USE NO. lbs At FactoryMANDATORY ATTACHMENTS
WORK TOOLS (CONT.)
Disc Selection (Cont.)
P 351-0511 FELLING DISC, STAGGERED 757 NC.............................Includes 16 x 1.875" bolt on shankless carbide teethstaggard high and low providing overall cut of 2.25".REQUIRES: 337-5523 SC-57 Felling Saw -OR-
440-4884 SS-56 Felling Saw
Mount Selection
Must select one when ordering any Disc Saw Head.
P 384-8349 C SERIES MOUNTS, SH-56B 272 NC............................Includes tilt links, hoses, pins, wire harness, andother miscellaneous installation hardware.REQUIRES: 376-5449 SH-56B Bunching Saw
P 379-4357 C SERIES MOUNTS, SC-57 430 NC.............................Includes tilt links, hoses, pins, wire harness, andother miscellaneous installation hardware.REQUIRES: 337-5523 SC-57 Felling Saw
P 386-1383 C SERIES MOUNTS, SS-56 272 NC.............................Includes tilt links, hoses, pins, wire harness, andother miscellaneous installation hardware.REQUIRES: 440-4884 SS-56 Felling Saw