TM 5-3800-205-23-2 0008 00-1 BACKUP ALARM REPLACEMENT 0008 00 THIS WORK PACKAGE COVERS Removal, Installation INITIAL SETUP Maintenance Level Unit Tools and Special Tools Tool kit, general mechanic’s (Item 33, WP 0048 00) Materials/Parts Strap, tiedown (Item 38, WP 0047 00) Equipment Condition Machine parked on hard, level surface (TM 5-3800- 205-10-1) Scraper bowl lowered to ground (TM 5-3800-205- 10-1) Parking brake applied (TM 5-3800-205-10-1) Wheels chocked (TM 5-3800-205-10-1) Battery disconnect switch in OFF position (TM 5- 3800-205-10-1) NOTE Backup alarm is located on crossmember, underneath rear deck. Alarm can be accessed from underneath machine. REMOVAL 1. Remove electrical tiedown strap (3) and discard. 2. Disconnect backup alarm connector (2) from wiring harness connector (1). 1 2 3 390-1753