Page 1
BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
Catalogue automobile BVG 2017 2017 Automotive catalog
Ce document et les photos jointes sont la propriété de BVG.
Aucune reproduction et diffusion ne sera autorisée sans l’accord écrit de
notre société.
The content of this document is the property of BVG and cannot be used or
reproduced without the written authorization of BVG.
01/01/2017
Page 2
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P1
Porte-poinçons Punch holders
Plaques de frappe strike plates
Poinçons d’identification Identification punches
P2 P6 P7
Blocs à fixer Punches to fasten
Poinçons/Matrices/Cales Stamps/Dies/blocks
Poinçons Punches
P10 P12 P14
Blocs en T T-shaped punches
Blocs en L L-shaped punches
Blocs à encoche Groove punches
P16 P21 P24
Blocs droits Straight punches
Blocs interchangeables Interchangeable punches
Témoins de frappe / poinçons de contrôle
Punch inspection/ punch assembly followed
P25 P25 P26
Vis gravées Engraved screws
P26
Sommaire
Page 3
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P2
Porte-poinçons fournis avec tôle de choc et goupille
Porte-poinçons pour 4 à 12 blocs en T 10,5/7 x 4 x 12,5 mm
Porte-poinçons pour 8 à 24 blocs en T étroits 10,5/7 x 2 x 12,5 mm
Porte-poinçons / Punch holders
Punch holders provided with strike plate and pin
Punch holders for 4 to 12 T shaped punches 10,5/7 x 4 x 12,5 mm
Punch holders for 8 to 24 narrow T shaped punches 10,5/7 x 2 x 12,5 mm
Nombre de blocs No. of punches
Code MABEC MABEC code
Code BVG BVG code
4 R 100 050 232
P 399 391 701 25 70 24
6 R 100 197 803
N 000 467 867 25 70 30 RNUR
8 R 100 050 234
P 399 391 702 25 70 25
10 P 399 391 703
R 100 352 214 25 70 26
12 Spécial sur demande
on request
13 Spécial sur demande
on request
16 Spécial sur demande
on request
PSA/Renault
Page 4
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P3
Porte-poinçons / Punch holders
Pièce Piece
Dimensions
25x15x34
30x15x34
40x15x34
25x15x34
30x15x34
40x15x34
Pièce Piece
Dimensions
50x15x34
50x15x34
60x15x34
70x15x34
50x15x34
50x15x34
60x15x34
70x15x34
Pièce Piece
B1
12 13
8.1 6.1
39D 647
39D 647
39D 647
21
22
23
24
25
26
Volkswagen
39D 647
30
31
32
33
34
35
36
37
Page 5
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P4
Porte-poinçons with engravings / Punch holders with engravings
Page 6
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P5
Porte-poinçons spéciaux / Spécial punch holders
PSA Groupe
Bentley
Page 7
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P6
Plaques de frappe / Strike plates
Nombre de blocs Number of punches
Code MABEC MABEC code
CODE BVG BVG code
4 R 100 050 235 Z 000 151 091
25 70 27
6 R 100 197 805 N 000 467 866
25 70 31 RNUR
8 R 100 050 236 Z 000 151 092
25 70 28
10 Z 000 151 093 R 100 352 230
25 70 29
12 Spécial sur demande
On request
13 Spécial sur demande
On request
16 Spécial sur demande
On request
PSA / Renault
Page 8
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P7
Poinçons d’identifications / Identification punches
General Motors (GM)
Nissan
Ford Motor Company
Page 9
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P8
logo PSA logo TOYOTA D + texte
logo PSA logo TOYOTA G + texte
Poinçons d’identifications / Identification punches
Z 000 198 171
Z 000 198 170
Z 000 198 169
N 001 162 511
N 001 162 513
N 001 162 514
Z 000 113 361
Z 000 113 360
Z 000 113 359
Z 000 409 928
Z 000 409 927
Z 000 409 912
P 785 287 005
P 785 287 006
P 785 287 004
PSA Groupe
Logo RENAULT seul
Logo RENAULT + D ou RENAULT + G
Code ITG
LOGO DFM DS + DFM
Page 10
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P9
Poinçons d’identifications / Identification punches
Pavés de marquage PSA / CITROEN PSA Citroen marking blocks
Blocs spéciaux à double pente Double sloping marking blocks
PSA Groupe
Page 11
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P10
Blocs à fixer / Punches to fasten marking
R100 589 840 R100 632 898
R100 667 309 Texte seul : R100 667 308 Texte + logo : R100 667 307
CODE MABEC P 785 199 171 D 884 009 030
Ensemble poinçon à fixer en acier traité gravé
En relief à l'envers du texte RENAULT ou RENAULT DACIA ou code ITG
Fourni avec tôle de choc
Renault - Dacia
Jaguar DXC Smart
Alpine Mopar
Page 12
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P11
Blocs à fixer / Punches to fasten marking
CODE MABEC Mabec code
DÉSIGNATION Products
R 100 629 541
Cadenas ouvert à droite Assembly punch padlock opened on right
R 100 629 517 Cadenas ouvert à gauche
Assembly punch padlock opened on left
R 100 629 531 Cadenas fermé
Assembly punch padlock closed
Cadenas Renault / Padlocks
Cadenas ouverts à gauche, à droite ou fermés
Closed or opened padlocks
Page 13
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P12
Poinçons-Matrices-Cales / Stamps-Dies-blocks
CODE MABEC
Mabec code
CODE BVG
BVG code
DÉSIGNATION
Products
Z 000 503 028 597146 Ensemble poinçon mobile pour empreinte de dégazage laser
Z 000 503 032 597147 Poinçon mobile pour empreinte de dégazage laser
CODE MABEC DÉSIGNATION
Z 000 503 033 Matrice Die bush
Z 000 503 029 Cale D19 D19 spacer
Poinçon mobile
Poinçon empreinte femelle
Page 14
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P13
Poinçons-Matrices-Cales / Stamps-Dies-blocks
CODE MABEC Mabec code
DÉSIGNATION Products
Z 000 503 031 Poinçon - Punch
Z 000 504 280 Cale D17- D17 spacer
Z 000 503 030 ENSEMBLE POINCON/MATRICE/CALE
Set of Punch/ Die bush / spacer
CODE MABEC DÉSIGNATION
N 000 748 981 Ensemble poinçon orienté/Matrice/Cales Set of key-located punch, die bushes, spacer
N 000 748 982 Poinçon dégazage orienté
N 000 748 983 Cale 17 poinçon dégazage orienté
Poinçon empreinte mâle
Poinçon de dégazage
Page 15
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P14
Poinçons / Stamps
CODE MABEC P 785 128 500/P 785 128 100
CODE MABEC P 785 199 170
Gravure tranchante en relief à l’envers caractères 2,5 mm 2,5 mm relief on left cutting
Code ITG : losange de 12 x 8 - 3 caractères de 3 mm ITG code : diamond of 12 x 8 mm - 3 characters of 3 mm
Bloc à queue Punch with round shank
Poinçons à emmancher Round punches to engage
Page 16
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P15
Poinçons / Stamps
CODE MABEC Mabec code
LOGO Logo
DÉSIGNATION Products
N 000 748 978
Plat en bas
SENS HORAIRE Clockwise
N 000 748 980
Plat en haut
SENS ANTI HORAIRE Anticlockwise
N 000 911 413
Plat en bas
SENS HORAIRE Clockwise
N 000 911 414
Plat en haut
SENS ANTI HORAIRE Anticlockwise
Marquage sécurité enfants Child safety symbols
Page 17
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P16
Blocs en T / T-shaped punches
Dimensions du bloc Punch dimensions
F/G x B x A
Hauteur du caractère Height of the character
9,4/5 x 3 x 17,4 3 ou 4
7/4 x 2 x 9 2
13/8 x 4 x 25 3,5
6/10 x 2,5 x 19 3
6/4 x 2 x 19 2
10.5/7 x 2 x 10.6 3
Pour obtenir un devis, merci de nous faire parvenir le tableau complété To get a quote, please fill in the following table
A B C D E F G
Vous souhaitez d’autres dimensions?
Prenez contact avec nous! You can’t find dimensions you are looking for?
Get in touch with us!
Blocs en T spéciaux Custom T-shaped punches
Page 18
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P17
Blocs en T / T-shaped punches
Blocs en T 10.5/7 x 4 x 12.5mm
Gravure tranchante en relief à l’envers
Hauteur des caractères : 5 mm Height of the character : 5mm
Blocs pour montage dans les porte-poinçons : R 100 050 932 R 100 050 234 R 100 197 803 R 399 391 703
CODE BVG : 256999 suivi du caractère correspondant
RENAULT-PSA
Page 19
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P18
Blocs en T / T-shaped punches
Blocs en T 10,5/7 x 2 x 12,5 mm
Avec ou sans perçage - With or without a hole
Gravure tranchante en relief à l’envers - Relief on left cutting
Hauteur du caractère : 3 mm - Height of the character : 3 mm
CODE MABEC GRAVURE CODE MABEC GRAVURE CODE MABEC GRAVURE CODE MABEC GRAVURE
Z 000 491 893
P 785 154 003 0 ou O
Z 000 492 408
P 785 155 003
SPACER Z 000 491 971
P 785 155 306
G Z 000 491 980
P 785 140 950
Q
Z 000 491 957
P 785 154 103 1
Z 000 504 319 Dash "-" Z 000 491 972
P 785 155 307
H Z 000 492 022
P 785 140 951
R
Z 000 491 958
P 785 154 203
2 N 000 467 865 Underscore "_" Z 000 491 973
P 785 155 308
I Z 000 492 023
P 785 140 952
S
Z 000 491 959
P 785 154 303
3 Z 000 491 965
P 785 155 300
A Z 000 491 974
P 785 155 309
J Z 000 492 024
P 785 140 953
T
Z 000 491 960
P785 154 403
4 Z 000 491 966
P 785 155 301
B Z 000 491 975
P 785 155 310
K Z 000 492 025
P 785 140 954
U
Z 000 491 961
P785 154 503
5 Z 000 491 967
P 785 155 302
C Z 000 491 976
P 785 155 311
L Z 000 492 026
P 785 140 955
V
Z 000 491 962
P785 154 603
6 et 9 Z 000 491 968
P 785 155 303
D Z 000 491 977
P 785 155 312
M Z 000 492 027
P 785 140 956
W
Z 000 491 963
P 785 154 703
7 Z 000 491 969
P 785 155 304
E Z 000 491 978
P 785 155 313
N Z 000 492 028
P 785 140 957
X
Z 000 492 964
P785 154 803
8 Z 000 491 970
P 785 155 305
F Z 000 491 879
P 785 155 314
P Z 000 492 029
P 785 140 958
Y
Z 000 492 030
P 785 140 959
Z
RENAULT-PSA
Page 20
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P19
Blocs en T / T-shaped punches
CODE GRAVURE CODE GRAVURE CODE GRAVURE CODE GRAVURE
F33290043 0 ou O F33290052 9 F33290150 J F33290159 U
F33290044 1 F33290142 A F33290151 K F33290160 V
F33290045 2 F33290143 B F33290152 L F33290161 W
F33290046 3 F33290144 C F33290153 M F33290162 X
F33290047 4 F33290145 D F33290154 N F33290163 Y
F33290048 5 F33290146 E F33290155 P F33290164 Z
F33290049 6 F33290147 F F33290156 R
F33290050 7 F33290148 G F33290157 S
F33290051 8 F33290149 H F33290158 T
Opel
Page 21
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P20
Blocs en T / T-shaped punches
CODE MABEC F33290063
CODE MABEC R 100 589 841
CODE MABEC R 100 589 838
Bloc en T gravé du logo GM
General Motors
Mercedes
Poinçon de marquage Butée de Pare-Brise Marking punch Stop of Windscreen
Page 22
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P21
Blocs en L / L-shaped punches
CODE MABEC Gravure B CODE MABEC Gravure B CODE MABEC Gravure B
WDX20-70-0200
WDX20-70-0201
WDX20-70-0202
WDX20-70-0203
WDX20-70-0204
WDX20-70-0205
WDX20-70-0206
WDX20-70-0207
WDX20-70-0208
WDX20-70-0209
WDX20-70-0213
WDX20-70-0214
WDX20-70-0215
WDX20-70-0216
WDX20-70-0217
WDX20-70-0218
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
3,0
3,0
3,0
3,0
3,0
2,5
WDX20-70-0219
WDX20-70-0220
WDX20-70-0221
WDX20-70-0222
WDX20-70-0223
WDX20-70-0224
WDX20-70-0225
WDX20-70-0226
WDX20-70-0227
WDX20-70-0228
WDX20-70-0229
WDX20-70-0230
WDX20-70-0231
WDX20-70-0232
WDX20-70-0233
3,0
3,0
2,5
2,5
3,0
2,5
3,5
3,0
3,5
3,0
3,0
3,0
3,0
2,5
3,0
WDX20-70-0234
WDX20-70-0235
WDX20-70-0236
WDX20-70-0237
WDX20-70-0238
WDX20-70-0239
WDX20-70-0251
WDX20-70-0252
WDX20-70-0253
WDX20-70-0254
WDX20-70-0255
WDX20-70-0256
2,5
3,5
2,5
2,5
2,5
1,5
2,5
2,5
2,5
2,5
2,5
2,5
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
G
H
I
J
K
L
M
N
1/2
P
Q
R
S
T
U
V
W
X
Y
Z
-
A
B
C
D
E
N
Ford Motor Company
Page 23
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P22
Blocs en L / L-shaped punches
Arrière gauche Arrière droite
Avant droite Avant gauche
6/5 x 3 x 15 mm
5/4 x 2 x 15 mm
Blocs en L 16.5/15 x 22 x 12.5 mm
L-shaped punches 16.5/15 x 22 x 12.5 mm
Faurecia
Sigle voiture
Car engraving
Page 24
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P23
Blocs en L / L-shaped punches
Pour obtenir un devis, merci de nous faire parvenir le tableau complété To get a quote, please fill in the following table
A B C D E F G
Blocs en L spéciaux
Custom L-shaped punches
Page 25
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P24
Blocs à encoche / Groove punches
Pour obtenir un devis, merci de nous faire parvenir le tableau complété To get a quote, please fill in the following table
A B C D E F G
Page 26
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P25
Blocs droits gravés / Straight punches
Blocs droits dimensions selon plan fourni
straight engraved punches exactly to specifications (logo or text)
Gravure au choix : logo Renault, GM, Citroen, Peugeot, code ITG, etc.
Blocs interchangeables
Interchangeable punches
Page 27
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P26
Témoin de frappe / Punch inspection - punch assembly followed
Vis gravées / Engraved screws
CODE MABEC DÉSIGNATION
P 785 283 005 Ensemble poinçon contrôle de frappe
Page 28
For any price inquiry, please send us drawings and quantities BERNARD VANDROS GOM - www.bvgsa.com - +33 3 85 97 26 26 - 71590 GERGY France
P27