Catalogue

Product Catalogue

2010 Pricing(Rev. 03/19/10)

Phone: 279-7789Fax: 279-2816

[email protected]

Hours of OperationMon - Thurs 7:30 to 5:00Friday 7:30 to 4:00

11580 40 Street SE, Calgary, Alberta, T2Z 4V6

www.multiwood.com

1 In t roduct ion

PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816

To Provide High Quality Products at Competitive Prices with On-Time Deliveries, While Striving to Provide a Safe and Friendly Work Environment

______________

Alder Clear or Knotty................... 20%Beech......................................... 40%Cherry......................................... 54%Hickory........................................ 20%Knotty Pine.................................. Base Price

**May not be available in plywood panel doors (ie: MW1, MW2, MN1, MS1, etc).

______________

Maple (Brown)........................... 2%Maple (White Hard)................... 35%Maple Paint Grade MDF Panel.. 2%African Mahogony**................. 50%Walnut....................................... 65%

Rift Cut (Vertical Grain) Fir...........40%Rift Cut Red Oak**..................... 70%Rift Cut White Oak**................... 70%QTR Sawn African Rosewood**.. 75%QTR Sawn Red Oak**................. 70%QTR Sawn White Oak**...............70%

Products

Cabinet Doors - We produce a wide range of solid wood cabinet doors (standard and mitered, MDF routered doors and slab-plywooddoors). Applied mouldings are available for many of our doors as well.

Passage Doors - We produce high end interior solid wood and MDF passage doors to your specifications.

Mouldings - We produce hard wood mouldings in all domestic wood types and some exotic species. We stock hard wood mouldings in oak, maple, cherry, poplar, alder, knotty alder, and beech. We make custom MDF mouldings to your specifications.

Kitchen Components - We produce and stock 5/8” melamine kitchen components in white and hard rock melamine. Our system isdesigned to be as flexible as possible for the contractor who can design and install custom kitchens.

Hardware - We stock cabinet door European hinges, drawer slides (accuride and blumotion), and a variety of items for basic assembly.

Hardwood Flooring - We sell a wide range of prefinished hardwood flooring, installation available if required.

Custom Machining - We specialise in high production, including CNC routing and drilling, sheet goods cut to size, planing solid lumber,straight line ripping, laminating, sanding and custom mouldings. We also welcome custom design orders or other wood types. Wefeature fast turn-around times. Please inquire.

Pricing

We have provided pricing for selected sizes and styles of oak doors for reference purposes only. Customers are encouraged to contactour order desk for a written quote. Catalogue prices are subject to change without notice. Quoted prices will be honored for 30 days.

Wood Factors (upcharge by wood type)

Payment Terms

We accept cash, debit card, VISA, MasterCard or Company Cheque (must be personalized with company name, address and phone number). Cheques that are returned NSF will be subject to a service charge of $25.00. All cash sale orders require a minimum 50%deposit prior to the order being sent to production. Balance is payable on completion.

Order Changes & Cancellations

There will be a minimum $35.00 revision/cancellation charge, or the following charges will be applied: 33% of item price after the first day, 66% of item price after the second day, 100% item price after the third day.

Delivery Service

We offer delivery within the city of Calgary and to outlying communities including Okotoks, Cochrane, Airdrie and Chestermere Lake.

Mission Statement

Established in 1985

Wood Specifications

Multiwood is proud to produce fine products from a wide variety of wood species. Red oak, maple, pine, cherry, alder, walnut and hickory are some of the many species we work with. The characteristics of each species are unique, and equally as unique is each tree. Due to genetic differences, soil, moisture and weather, the wood we get in any one species varies widely. These natural variations - “God's Fingerprints” - give wood the beauty that we have learned to appreciate. It is impossible to guarantee that all pieces used will have uniform colour, and be free of these natural marks. Knotty wood is available in most species. Please Inquire!

Alder Alder is separated into clear and knotty alder

Clear Alder Sound pin knots up to 1/8” may appear on the face of the door, and up to 3/16” on the back. Colour Streaks up to 1/4” by 2” are acceptable on the face of the door, and the back.

Knotty Alder Sound knots of any size are acceptable, and see through holes in knots are allowed, if they are small. Color Streaks are acceptable, if there are no cracks or splits in the streak and it is sound. No pitch pockets are acceptable.Note: Some panels may have limited or no knots due to the nature of the wood. Whether a door is “too knotty” or “not knotty enough” is subjective, and cannot be warranted for replacement.

Cherry American Black Cherry is used for all of our cherry products. (the wood is named for the colour of the berry). The heartwood is colour matched and a reasonable grain match is made. The natural characteristics of cherry include mineral streaks, gum pockets, figured grain and pin knots. Pin knots up to 1/8” may be found on the face for the doors and up to 3/16” on the back. Mineral streaks and gum pockets may be found up to 1/8” by 2 ½” long on the face of the door, gum pockets of any size and quantity may be found on the back of the door, as long as there are no cracks or splits in the streak. Sap can be included in the face on request, and may be present on the back as long as it is sound.

Hickory Northern True Hickory is used for all our hickory products. Heartwood and sapwood is always mixed in various degrees. This results in extreme colour and grain variation which give it a rustic look. Sound pin knots up to 1/8” may appear on the face of the door, and up to 3/16” on the back.

Knotty Pine Eastern White Pine, or Furniture Pine, is used for our pine products. It is the preferred pine; due to its low pitch content. The doors will have knots in the panels but may, or may not have knots in the stiles and rails. Knots may extend to an edge of the stile and rail, but not the entire piece, and can be as large as 3” in diameter. Cracks in knots that penetrate the thickness of the doorare allowed. Pitch and mineral streaks up to ½” wide by 6” long may be found on the face of the door. Note: Some panels may have limited or no knots due to the nature of the wood. Whether a door is “too knotty” or “NOT knotty enough” is subjective, and cannot be warranted for replacement.

Maple Sugar Maple, also known as White Hard Maple is used for all our maple products. We separate our maple products into two categories: Maple, and Brown Maple. This is based on a combination of colour and natural defects.

Maple will be all white wood face. Mineral streaks 1/8” by 3/4” long may occur on the face of the door and 1/4” by 3” on the back. Some Brown or sugar tracks (heartwood) may occur on the back of the door. Sound pin knots up to 1/8” may appear on the face of the door, and up to 3/16” on the back. Some color streaks of 1/8” by 2/4” are acceptable on the face, and some brown or light green color streaks are acceptable on the back.

Brown maple will include heartwood and any natural defects, and miscellaneous sound defects, in any quantity and size. Brown and dark streaks may occur on face and back in any size and shape.

Red Oak Northern red oak is used for all our oak products. It is the most colour consistent of all red oak. We will make a reasonable colour and grain match. Colour variations are considered normal. Excessive mineral streaks are not allowed. Mineral streaks up to 1/8” by 2” may be found on the face of the doors and on the backs. Sound pin knots up to 1/8” may appear on the face of the door, and up to 3/16” on the back. Sapwood up to 1” is acceptable on the back of the door, as long as it does not show through the face.

Walnut Sound pin knots up to 1/8” may appear on the face of the door, and up to 3/16” on the back. Sapwood up to a width of 1” is acceptable on the back of the door, as long as it does not show through the face.

Our doors are sold unfinished and should not be left any length of time before finishing. Color changes will occur when wood is exposed to light and air. Finishing will slow down the process but changes in color will still occur. Unfinished wood can change color rapidly especially in the case of cherry. It is recommended that cherry be kept covered until you are ready to finish. Care should be taken when storing doors prior to finishing, or installation. Avoid Extreme Cold, Heat and Humidity

Wood Specifications2


Standard Shapes3

All frames are optionally available with groove and vinyl insert for easy installation of 3mm thick glass (see page 15). This option is available free of charge in either white or brown. When ordering frame doors please include door style and frame number: ie: MW3 F8

Standard: Frames available in all shapes including Cathedral and Eyebrow

MDF: Frames available in all shapes including Cathedral and Eyebrow

Miter: Open frame for all. Mullions in MN, MT, MX and MR only.

Cathedral Half Cathedral-L Half Cathedral-R Eyebrow Half Eyebrow-L Half Eyebrow-R

Double Cathedral

Double Eyebrow

Eyebrow Side By Side- Recommended from 28”

or wider

Square

Cathedral Side By Side- Recommended from

28” or wider

All Mitered Doors This Shape Only

F F4 F6 F9F8

French Frames

Square Side By Side- Recommended from

28” or wider

Double Panel with Cathedral top

Double Panel Side by Side with F4 Frames

Triple Panel with Eyebrow F4 Frame Top

Triple Panel Side by Side with Cathedral Top

Quadruple Panel 1A2 (1 Panel Above 2) 2A1(2 Panels Above 1)

Wainscoting - Advise the number of panels required. Individual

panels should be no wider than 24 inches. Overall width should be maximum 108 inches, anything

over this requires a special quote

Double panel and triple panel doors are recommended to prevent warpage on larger doors. Doors 42" or higher should have a double panel, doors 62" or higher should have a triple panel. Doors over 26" wide should have side by side double panels.

Recommendedover 42” high

Recommended over 62” high

Recommended over 80” high

Please note - These are only examples, as there are many combinations of

Double, Triple, Quadruple Panel and Side by Side Doors available by

selecting different shape and frame options. Also, the location of middle rails can vary according to your preference. Not available in the Miter Door style.

**No warranty for doors over 50” high or 28” wide.


Shaker Stile/Rail with Optional Panels For Doors

Standard Solid Wood Doors

DFB - Drawer Front Blank 2 1/4” Stile with 1 1/2” Rail(Codes Starting with “D”)

2 1/4” Stile & Rail(All Codes With Suffix “HG”)

Slab Reduced Rail Full Size Rail

Drawer Front Opt ions

Ply Panel

Cove Panel

Multiwood Panel

Pearl Panel

Bevel Panel

Soft Panel

Reversed Panel

Beaded Panel

V-Grooved Panel

See Page 18 for Outside Edge Profile Options

Codes with suffix “VP”

Codes with suffix “BP”

Codes with Suffix “F”See Page 3 for Frame Options

Shaker Stile/Rail

4

CODES MINIMUM SIZES

MS1 F Square, Full Drawer 127mm 5 140mm 5 1/2

MS2 F Cathedral & Half 127mm 5 180mm 7 1/16

MS8 F Eyebrow & Half 127mm 5 189mm 7 7/16

DS1 F Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2

WidthHeight

CODES MINIMUM SIZES

MS1, MS1 HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2

MS2, MS5L, MS5R Cathedral & Half 172mm 6 3/4 180mm 7 1/16

MS8, MS7L, MS7R Eyebrow & Half 156mm 6 1/8 189mm 7 7/16

DS1 Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2

WidthHeight

CODES MINIMUM SIZES

MSC3, MSC3 HG Square, Full Drawer 169mm 6 5/8 169mm 6 5/8

MSC4, MSC6L, MSC6R Cathedral & Half 210mm 8 1/4 180mm 7 1/16

MSC9, MSC10L, MSC10R Eyebrow & Half 194mm 7 5/8 189mm 7 7/16

DSC Reduced Rail Drawer 131mm 5 1/8 169mm 6 5/8

WidthHeight

CODES MINIMUM SIZES

MS3, MS3 HG Square, Full Drawer 164mm 6 7/16 164mm 6 7/16

MS4, MS6L, MS6R Cathedral & Half 205mm 8 1/16 180mm 7 1/16

MS9, MS10L, MS10R Eyebrow & Half 189mm 7 7/16 189mm 7 7/16

DS3 Reduced Rail Drawer 126mm 4 15/16 164mm 6 7/16

WidthHeight

CODES MINIMUM SIZES

MSP3, MSP3 HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16

MSP4, MSP6L, MSP6R Cathedral & Half 222mm 8 11/16 183mm 7 3/16

MSP9, MSP10L, MSP10R Eyebrow & Half 209mm 8 3/16 189mm 7 7/16

DSP Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

WidthHeight

CODES MINIMUM SIZES

MSB, MSB HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16

Not Available Cathedral & Half ─ ─ ─ ─

Not Available Eyebrow & Half ─ ─ ─ ─

DSB Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

WidthHeight

CODES MINIMUM SIZES

MSS, MSS HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16

MSS4, MSS6L, MSS6R Cathedral & Half 224mm 8 13/16 196mm 7 11/16

MSS9, MSS10L, MSS10R Eyebrow & Half 209mm 8 3/16 189mm 7 7/16

DSS Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

WidthHeight

BP and VP CODES MINIMUM SIZES

MSR, MSR HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2

MSR4, MSR6L, MSR6R Cathedral & Half 172mm 6 3/4 180mm 7 1/16

MSR9, MSR10L, MSR10R Eyebrow & Half 156mm 6 1/8 189mm 7 7/16

DSR VGBP, DSR VGVP DSR Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2

Width

For This Option add

Suffix "BP" or "VP" to

Codes Directly to Right

Height

Shaker Stile/Rail

Shaker Stile/Rail

Shaker Stile/Rail

Shaker Stile/Rail

Shaker Stile/Rail

Shaker Stile/Rail

Shaker Stile/Rail

Shaker Stile/Rail

Shaker Stile/Rail



Ply Panel

Cove Panel

Multiwood Panel

Pearl Panel

Bevel Panel

Soft Panel

Reversed Panel

Beaded Panel

V-Grooved Panel

Cove Stile/Rail with Optional Panels For Doors See Page 18 for Outside Edge Profile Options

5

CODES MINIMUM SIZES

MW1 F Square, Full Drawer 127mm 5 140mm 5 1/2

MW2 F Cathedral & Half 127mm 5 180mm 7 1/16

MW8 F Eyebrow & Half 127mm 5 189mm 7 7/16

DF1 F Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2

Height Width

CODES MINIMUM SIZES

MW1, MW1 HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2

MW2, MW5R, MW5L Cathedral & Half 172mm 6 3/4 180mm 7 1/16

MW8, MW7L, MW7R Eyebrow & Half 156mm 6 1/8 189mm 7 7/16

DF1 Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2

Height Width

CODES MINIMUM SIZES

MC3, MC3 HG Square, Full Drawer 169mm 6 5/8 169mm 6 5/8

MC4, MC6L, MC6R Cathedral & Half 210mm 8 1/4 180mm 7 1/16

MC9, MC10L, MC10R Eyebrow & Half 194mm 7 5/8 189mm 7 7/16

DC3 Reduced Rail Drawer 131mm 5 1/8 169mm 6 5/8

Height Width

CODES MINIMUM SIZES

MW3, MW3 HG Square, Full Drawer 164mm 6 7/16 164mm 6 7/16

MW4, MW6L, MW6R Cathedral & Half 205mm 8 1/16 180mm 7 1/16

MW9, MW10L, MW10R Eyebrow & Half 189mm 7 7/16 189mm 7 7/16

DF3 Reduced Rail Drawer 126mm 4 15/16 164mm 6 7/16

Height Width

CODES MINIMUM SIZES

MP3, MP3 HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16

MP4, MP6L, MP6R Cathedral & Half 224mm 8 13/16 183mm 7 3/16

MP9, MP10L, MP10R Eyebrow & Half 209mm 8 3/16 189mm 7 7/16

DP3 Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

Height Width

CODES MINIMUM SIZES

MB3, MB3 HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16



DB3 Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

Height Width

CODES MINIMUM SIZES

MWS, MWS HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16

MWS4, MWS6L, MWS6R Cathedral & Half 224mm 8 13/16 183mm 7 3/16

MWS9, MWS10L, MSW10R Eyebrow & Half 209mm 8 3/16 189mm 7 7/16

DFS Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

Height Width


MWR, MWR HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2

MWR4, MWR6L, MWR6R Cathedral & Half 172mm 6 3/4 180mm 7 1/16

MWR9, MWR10L, MWR10R Eyebrow & Half 156mm 6 1/8 189mm 7 7/16

DFR VGBP, DFR VGVP DFR Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2

For This Option add



Height Width


Cove Stile/Rail

DFB - Drawer Front Blank 2 1/4” Stile with 1 1/2” Rail(Codes Starting with “D”)



Drawer Front Opt ions

Cove Stile/Rail

Cove Stile/Rail

Cove Stile/Rail

Cove Stile/Rail

Cove Stile/Rail

Cove Stile/Rail

Cove Stile/Rail

Cove Stile/Rail

Cove Stile/Rail

Codes with suffix “BP”




Ogee Stile/Rail with Optional Panels For Doors

Ply Panel

Cove Panel

Multiwood Panel

Pearl Panel

Bevel Panel

Soft Panel

Reversed Panel

Beaded Panel

V-Grooved Panel

6


CODES MINIMUM SIZES

OW1 F Square, Full Drawer 127mm 5 140mm 5 1/2

OW2 F Cathedral & Half 127mm 5 194mm 7 5/8

OW8 F Eyebrow & Half 156mm 199mm 7 13/16

EF1 F Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2

Height Width

CODES MINIMUM SIZES

OW1, OW1 HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2

OW2, OW5L, OW5R Cathedral & Half 172mm 6 3/4 194mm 7 5/8

OW8, OW7L, OW7R Eyebrow & Half 156mm 6 1/8 199mm 7 13/16

EF1 Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2

Height Width

CODES MINIMUM SIZES

OC3, OC3 HG Square, Full Drawer 169mm 6 5/8 169mm 6 5/8

OC4, OC6L, OC6R Cathedral & Half 210mm 8 1/4 194mm 7 5/8

OC9, OC10L, OC10R Eyebrow & Half 194mm 7 5/8 199mm 7 13/16

EC3 Reduced Rail Drawer 131mm 5 1/8 169mm 6 5/8

Height Width

CODES MINIMUM SIZES

OW3, OW3 HG Square, Full Drawer 164mm 6 7/16 164mm 6 7/16

OW4, OW6L, OW6R Cathedral & Half 205mm 8 1/16 194mm 7 5/8

OW9, OW10L, OW10R Eyebrow & Half 189mm 7 7/16 199mm 7 13/16

EF3 Reduced Rail Drawer 126mm 4 15/16 164mm 6 7/16

Height Width

CODES MINIMUM SIZES

OP3, OP3 HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16

OP4, OP6L, OP6R Cathedral & Half 224mm 8 13/16 194mm 7 5/8

OP9, OP10L. OP10R Eyebrow & Half 209mm 8 3/16 199mm 7 13/16

EP3 Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

Height Width

CODES MINIMUM SIZES

OB3, OB3 HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16



EB3 Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

Height Width

CODES MINIMUM SIZES

OWS, OWS HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16

OS4, OS6L, OS6R Cathedral & Half 224mm 8 13/16 194mm 7 5/8

OS9, OS10L, OS10R Eyebrow & Half 209mm 8 3/16 199mm 7 13/16

EFS Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

Height Width


OWR, OWR HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2

OR4, OR6L, OR6R Cathedral & Half 172mm 6 3/4 194mm 7 5/8

OR9, OR10L, OR10R Eyebrow & Half 156mm 6 1/8 199mm 7 13/16

EFR VGBP, EFR VGVP EFR Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2

For This Option add



Height Width


Ogee Stile/Rail

DFB - Drawer Front Blank 2 1/4” Stile with 1 1/2” Rail(Codes Starting with “E”)



Drawer Front Opt ionsCodes with suffix “BP”


Ogee Stile/Rail

Ogee Stile/Rail

Ogee Stile/Rail

Ogee Stile/Rail

Ogee Stile/Rail

Ogee Stile/Rail

Ogee Stile/Rail

Ogee Stile/Rail

Ogee Stile/Rail


6 1/8


Pillow Stile/Rail with Optional Panels For Doors

Ply Panel

Cove Panel

Multiwood Panel

Pearl Panel

Bevel Panel

Soft Panel

Reversed Panel

Beaded Panel

V-Grooved Panel

7


CODES MINIMUM SIZES

AW1 F Square, Full Drawer 127mm 5 140mm 5 1/2

AW2 F Cathedral & Half 127mm 5 194mm 7 5/8

AW8 F Eyebrow & Half 156mm 6 1/8 199mm 7 13/16

BF1 F Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2

Height Width

CODES MINIMUM SIZES

AW1, AW1 HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2

AW2, AW5L, AW5R Cathedral & Half 172mm 6 3/4 194mm 7 5/8

AW8, AW7L, AW7R Eyebrow & Half 156mm 6 1/8 199mm 7 13/16

BF1 Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2

Height Width

CODES MINIMUM SIZES

AC3 AC3 HG Square, Full Drawer 169mm 6 5/8 169mm 6 5/8

AC4, AC6L, AC6R Cathedral & Half 210mm 8 1/4 194mm 7 5/8

AC9, AC10L, AC10R Eyebrow & Half 194mm 7 5/8 199mm 7 13/16

BC3 Reduced Rail Drawer 131mm 5 1/8 169mm 6 5/8

Height Width

CODES MINIMUM SIZES

AW3, AW3 HG Square, Full Drawer 164mm 6 7/16 164mm 6 7/16

AW4, AW6L, AW6R Cathedral & Half 205mm 8 1/16 194mm 7 5/8

AW9, AW10L, AW10R Eyebrow & Half 189mm 7 7/16 199mm 7 13/16

BF3 Reduced Rail Drawer 126mm 4 15/16 164mm 6 7/16

Height Width

CODES MINIMUM SIZES

AP3, AP3 HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16

AP4, AP6L, AP6R Cathedral & Half 224mm 8 13/16 194mm 7 5/8

AP9, AP10L, AP10R Eyebrow & Half 209mm 8 3/16 199mm 7 13/16

BP3 Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

Height Width

CODES MINIMUM SIZES

AB3, AB3 HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16



BB3 Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

Height Width

CODES MINIMUM SIZES

AS3 AS3 HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16

AS4, AS6L, AS6R Cathedral & Half 224mm 8 13/16 194mm 7 5/8

AS9, AS10L, AS10R Eyebrow & Half 209mm 8 3/16 199mm 7 13/16

BFS Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

Height Width


AR3, AR3 HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2

AR4, AR6L, AR6R Cathedral & Half 172mm 6 3/4 194mm 7 5/8

AR9, AR10L, AR10R Eyebrow & Half 156mm 6 1/8 199mm 7 13/16

BFR VGBP, BFR VGVP BFR Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2

For This Option add



Height Width


Pillow Stile/Rail

DFB - Drawer Front Blank 2 1/4” Stile with 1 1/2” Rail(Codes Starting with “B”)





Pillow Stile/Rail

Pillow Stile/Rail

Pillow Stile/Rail

Pillow Stile/Rail

Pillow Stile/Rail

Pillow Stile/Rail

Pillow Stile/Rail

Pillow Stile/Rail

Pillow Stile/Rail



V-Groove Through Stile/Rail with Optional Panels For Doors

V-Groove Through Stile/Rail

Ply Panel

Cove Panel

Soft Panel

Beaded Panel

V-Grooved Panel

Bevel Panel

Multiwood Panel

Pearl Panel

Reversed Panel

8


CODES MINIMUM SIZES

VS1 F Square, Full Drawer 127mm 5 140mm 5 1/2

VS2 F Cathedral & Half 127mm 5 180mm 7 1/16

VS8 F Eyebrow & Half 127mm 5 189mm 7 7/16

VF1 F Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2

Height Width

CODES MINIMUM SIZES

VS1, VS1 HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2

VS2, VS5L, VS5R Cathedral & Half 172mm 6 3/4 180mm 7 1/16

VS8, VS7L, VS7R Eyebrow & Half 156mm 6 1/8 189mm 7 7/16

VF1 Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2

Height Width

CODES MINIMUM SIZES

VSC, VSC HG Square, Full Drawer 169mm 6 5/8 169mm 6 5/8

VSC4, VSC6L, VSC6R Cathedral & Half 210mm 8 1/4 180mm 7 1/16

VSC9, VSC10L, VSC10R Eyebrow & Half 194mm 7 5/8 189mm 7 7/16

VFC Reduced Rail Drawer 131mm 5 1/8 169mm 6 5/8

Height Width

CODES MINIMUM SIZES

VS3, VS3 HG Square, Full Drawer 164mm 6 7/16 164mm 6 7/16

VS4, VS6L, VS6R Cathedral & Half 205mm 8 1/16 189mm 7 7/16

VS9, VS10L, VS10R Eyebrow & Half 189mm 7 7/16 189mm 7 7/16

VF3 Reduced Rail Drawer 126mm 4 15/16 164mm 6 7/16

Height Width

CODES MINIMUM SIZES

VSP, VSP HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16

VSP4, VSP6L, VSP6R Cathedral & Half 224mm 8 13/16 183mm 7 3/16

VSP9, VSP10L, VSP10R Eyebrow & Half 209mm 8 3/16 196mm 7 11/16

VFP Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

Height Width

CODES MINIMUM SIZES

VSB, VSB HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16



VFB Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

Height Width

CODES MINIMUM SIZES

VSS, VSS HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16

VSS4, VSS6L, VSS6R Cathedral & Half 224mm 8 13/16 183mm 7 3/16

VSS9, VSS10L, VSS10R Eyebrow & Half 209mm 8 3/16 189mm 7 7/16

VFS Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

Height Width


VSR, VSR HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2

VSR4, VSR6L, VSR6R Cathedral & Half 172mm 6 3/4 180mm 7 1/16

VSR9, VSR10L, VSR10R Eyebrow & Half 156mm 6 1/8 189mm 7 7/16

VFR VGBP, VFR VGVP VFR Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2

For This Option add



Height Width


DFB - Drawer Front Blank 2 1/4” Stile with 1 1/2” Rail 2 1/4” Stile & Rail(All Codes With Suffix “HG”)















Bevel Shaker Stile/Rail with Optional Panels For Doors

9


Bevel Shaker Stile/Rail

Ply Panel

Cove Panel

Multiwood Panel

Pearl Panel

Soft Panel

Bevel Panel

Reversed Panel

V-Grooved Panel

Beaded Panel

CODES MINIMUM SIZES

KS1 F Square, Full Drawer 127mm 5 140mm 5 1/2



KF1 F Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2

Height Width

CODES MINIMUM SIZES

KS1, KS1 HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2



KF1 Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2

Height Width

CODES MINIMUM SIZES

KSC, KSC HG Square, Full Drawer 169mm 6 5/8 169mm 6 5/8



KFC Reduced Rail Drawer 131mm 5 1/8 169mm 6 5/8

Height Width

CODES MINIMUM SIZES

KS3, KS3 HG Square, Full Drawer 164mm 6 7/16 164mm 6 7/16



KF3 Reduced Rail Drawer 126mm 4 15/16 164mm 6 7/16

Height Width

CODES MINIMUM SIZES

KSP, KSP HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16



KFP Reduced Rail Drawer 158mm 5 11/16 158mm 7 3/16

Height Width

CODES MINIMUM SIZES

KSB, KSB HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16



KFB Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

Height Width

CODES MINIMUM SIZES

KSS, KSS HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16



KFS Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

Height Width


KSR, KSR HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2



KFR VGBP, KFR VGVP KFR Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2

For This Option add



Height Width

















Lip Stile/Rail with Optional Panels For Doors

10

CODES MINIMUM SIZES

LS1 F Square, Full Drawer 127mm 5 140mm 5 1/2

LS2 F Cathedral & Half 127mm 5 180mm 7 1/16

LS8 F Eyebrow & Half 127mm 5 189mm 7 7/16

LF1 F Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2

Height Width

CODES MINIMUM SIZES

LS1, LS1 HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2

LS2, LS5L, LS5R Cathedral & Half 172mm 6 3/4 180mm 7 1/16

LS8, LS7L, LS7R Eyebrow & Half 156mm 6 1/8 189mm 7 7/16

LF1 Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2

Height Width

CODES MINIMUM SIZES

LSC, LSC HG Square, Full Drawer 169mm 6 5/8 169mm 6 5/8

LSC4, LSC6L, LSC6R Cathedral & Half 210mm 8 1/4 180mm 7 1/16

LSC9, LSC10L, LSC10R Eyebrow & Half 194mm 7 5/8 189mm 7 7/16

LFC Reduced Rail Drawer 131mm 5 1/8 169mm 6 5/8

Height Width

CODES MINIMUM SIZES

Ls3, LS3 HG Square, Full Drawer 164mm 6 7/16 164mm 6 7/16

LS4, LS6L, LS6R Cathedral & Half 205mm 8 1/16 189mm 7 7/16

LS9, LS10L, LS10R Eyebrow & Half 189mm 7 7/16 189mm 7 7/16

LF3 Reduced Rail Drawer 126mm 4 15/16 164mm 6 7/16

Height Width

CODES MINIMUM SIZES

LSP, LSP HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16

LSP4, LSP6L, LSP6R Cathedral & Half 224mm 8 13/16 183mm 7 3/16

LSP9, LSP10L, LSP10R Eyebrow & Half 209mm 8 3/16 196mm 7 11/16

LFP Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

Height Width

CODES MINIMUM SIZES

LSB, LSB HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16



LFB Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

Height Width

CODES MINIMUM SIZES

LSS, LSS HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16

LSS4, LSS6L, LSS6R Cathedral & Half 224mm 8 13/16 183mm 7 3/16

LSS9, LSS10L, LSS10R Eyebrow & Half 209mm 8 3/16 189mm 7 7/16

LFS Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

Height WIDTH


LSR, LSR HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2

LSR4, LSR6L, LSR6R Cathedral & Half 172mm 6 3/4 180mm 7 1/16

LSR9, LSR10L, LSR10R Eyebrow & Half 156mm 6 1/8 189mm 7 7/16

LFR VGBP, LFR VGVP LFR Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2

For This Option add



Height Width







Lip Stile/Rail

Ply PanelLip Stile/Rail

Lip Stile/Rail

Lip Stile/Rail

Lip Stile/Rail

Lip Stile/Rail

Lip Stile/Rail

Lip Stile/Rail

Lip Stile/Rail

Lip Stile/RailV-Grooved Panel

Beaded Panel

Reversed Panel

Soft Panel

Bevel Panel

Pearl Panel

Multiwood Panel

Cove PanelLip Stile/Rail



Stretch Stile/Rail with Optional Panels For Doors See Page 18 for Outside Edge Profile Options

CODES MINIMUM SIZES

CS1 F Square, Full Drawer 127mm 5 140mm 5 1/2

CS2 F Cathedral & Half 127mm 5 180mm 7 1/16

CS8 F Eyebrow & Half 127mm 5 189mm 7 7/16

CF1 F Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2

Height Width

CODES MINIMUM SIZES

CS1, VS1 HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2

CS2, CS5L, CS5R Cathedral & Half 172mm 6 3/4 180mm 7 1/16

CS8, CS7L, CS7R Eyebrow & Half 156mm 6 1/8 189mm 7 7/16

CF1 Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2

Height Width

CODES MINIMUM SIZES

CSC, CSC HG Square, Full Drawer 169mm 6 5/8 169mm 6 5/8

CSC4, CSC6L, CSC6R Cathedral & Half 210mm 8 1/4 180mm 7 1/16

CSC9, CSC10L, CSC10R Eyebrow & Half 194mm 7 5/8 189mm 7 7/16

CFC Reduced Rail Drawer 131mm 5 1/8 169mm 6 5/8

Height Width

CODES MINIMUM SIZES

Cs3, CS3 HG Square, Full Drawer 164mm 6 7/16 164mm 6 7/16

Cs4, CS6L, CS6R Cathedral & Half 205mm 8 1/16 189mm 7 7/16

Cs9, CS10L, CS10R Eyebrow & Half 189mm 7 7/16 189mm 7 7/16

Cf3 Reduced Rail Drawer 126mm 4 15/16 164mm 6 7/16

Height Width

CODES MINIMUM SIZES

CSP, CSP HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16

CSP4, CSP6L, CSP6R Cathedral & Half 224mm 8 13/16 183mm 7 3/16

CSP9, CSP10L, CSP10R Eyebrow & Half 209mm 8 3/16 196mm 7 11/16

CFP Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

Height Width

CODES MINIMUM SIZES

CSB, CSB HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16



CFB Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

Height Width

CODES MINIMUM SIZES

CSS, CSS HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16

CSS4, CSS6L, CSS6R Cathedral & Half 224mm 8 13/16 183mm 7 3/16

CSS9, CSS10L, CSS10R Eyebrow & Half 209mm 8 3/16 189mm 7 7/16

CFS Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16

Height Width


CSR, CSR HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2

CSR4, CSR6L, CSR6R Cathedral & Half 172mm 6 3/4 180mm 7 1/16

CSR9, CSR10L, CSR10R Eyebrow & Half 156mm 6 1/8 189mm 7

7/16

CFR VGBP, CFR VGVP CFR Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2

For This Option add



Height Width







Cove Panel

Pearl Panel

Soft Panel

V-Grooved Panel

Beaded Panel

Bevel Panel

Multiwood Panel

Reversed Panel

11

Ply Panel

StretchStile/Rail

StretchStile/Rail

StretchStile/Rail

StretchStile/Rail

StretchStile/Rail

StretchStile/Rail

StretchStile/Rail

StretchStile/Rail

StretchStile/Rail

StretchStile/Rail

1 7/8" mm (47.6 )

MT Doors:

3" 76.2 mm ( )

MT3 Door

MT Stile/Rail (for Door) Multiwood Panel DT Stile/Rail (for Drawer)

DT3 Drawer

MT1 Door

MT Stile/Rail + Ply Panel MT Stile/Rail + Cove Panel MT Stile/Rail + Pearl Panel

MT Stile/Rail + Soft Panel

MTS Door

MTP Door

MTB Door MTR Door

MTC Door

MT Stile/Rail + Bevel Panel MT Stile/Rail + Reversed Panel(Available in Beaded or V-Groove)

MN Doors:

3" 76.2 mm ( ) 1 3/4" mm (44.5 )

MN Stile/Rail (for Door) Multiwood Panel DN Stile/Rail (for Drawer)

MN3 Door DN3 Drawer

MN Stile/Rail + Bevel PanelMN Stile/Rail + Soft Panel

MN Stile/Rail + Pearl PanelMN Stile/Rail + Cove PanelMN Stile/Rail + Ply Panel

MNS Door

MNP Door

MNR DoorMNB Door

MNC DoorMN1 Door

MR Doors:

2 1/4" .2 mm (57 ) 1 3/4" mm (44.5 )

MR Stile/Rail (for Door) Multiwood Panel DR Stile/Rail (for Drawer)

MR3 Door DR3 Drawer

MR Stile/Rail + Bevel PanelMR Stile/Rail + Soft Panel

MR Stile/Rail + Pearl PanelMR Stile/Rail + Ply Panel MR Stile/Rail + Cove Panel

MRP Door

MRS Door

MRC Door

MRB Door

MR1 Door

MRR Door

See Page 3 for Frame Options. For Full Size Rail Drawer Fronts, Add Suffix “HG” to Door Code

See Page 3 for Frame Options. For Full Size Rail Drawer Fronts, Add Suffix “HG” to Door Code.

See Page 3 for Frame Options. For Full Size Rail Drawer Fronts Add Suffix “HG” to Door Code.

MN Stile/Rail + Reversed Panel(Available in Beaded or V-Groove)

MR Stile/Rail + Reversed Panel(Available in Beaded or V-Groove)

Codes

MT1 169mm 6 5/8

MT3 202mm 7 15/16

MTC 207mm 8 1/8

MTR 200mm 7 7/8

MTP, MTB, MTS 223mm 8 3/4

DT1 127mm 5

DT3 145mm 5 11/16

DTC 150mm 5 7/8

DTR 143mm 5 5/8

DTP, DTB, DTS 166mm 6 1/2

D

r

a

w

e

r

D

o

o

r

Height & Width

MINIMUM SIZES

Codes (Doors)

MN1 169mm 6 5/8

MN3 202mm 7 15/16

MNC 207mm 8 1/8

MNR 200mm 7 7/8

MNP, MNB, MNS 223mm 8 3/4

DN1 127mm 5

DN3 139mm 5 7/16

DNC 143mm 5 5/8

DNR 137mm 5 3/8

DNP, DNB, DNS 159mm 6 1/4

D

o

o

r

D

r

a

w

e

r

MINIMUM SIZES

Height & Width

Codes (Doors)

MR1 131mm 5 1/8

MR3 164mm 6 7/16

MRC 169mm 6 5/8

MRR 162mm 6 3/8

MRP, MRB, MRS 185mm 7 1/4

DR1 127mm 5

DR3 139mm 5 7/16

DRC 143mm 5 5/8

DRR 137mm 5 3/8

DRP, DRB,DRS 159mm 6 1/4

D

r

a

w

e

r

D

o

o

r

MINIMUM SIZES

Height & Width

12 Mitered Solid Wood Doors


2 1/4" .2 mm (57 ) 1 3/4" mm (44.5 )

MX Doors: MX3 Door

MX Stile/Rail (for Door) Multiwood Panel DX Stile/Rail (for Drawer)

DX3 Drawer

MX1 Door

MX Stile/Rail + Ply Panel MX Stile/Rail + Cove Panel MX Stile/Rail + Pearl Panel

MX Stile/Rail + Soft Panel

MXS Door

MXP Door

MXB Door MXR Door

MXC Door

MX Stile/Rail + Bevel Panel

ML Doors:

1 3/4" mm (44.5 )

ML3 Door DL3 Drawer

ML1 Door

ML Stile/Rail + Ply Panel ML Stile/Rail + Cove Panel ML Stile/Rail + Pearl Panel

ML Stile/Rail + Soft Panel

MLS Door

MLP Door

MLB Door MLR Door

MLC Door

ML Stile/Rail + Bevel Panel

ML Stile/Rail (for Door) Multiwood Panel DL Stile/Rail (for Drawer)

MH Doors: MH3 Door

MH1 Door

MH Stile/Rail + Ply Panel MH Stile/Rail + Cove Panel MH Stile/Rail + Pearl Panel

MH Stile/Rail + Soft Panel

MHS Door

MHP Door

MHB Door MHR Door

MHC Door

MH Stile/Rail + Bevel Panel

2 1/4" .2 mm (57 )2 1/4" .2 mm (57 )

MH Stile/Rail (for Door) Multiwood Panel MH Stile/Rail (for Drawer)

See Page 3 for Frame Options. For Full Size Rail Drawer Fronts Add Suffix “HG” to the Door Code. MX is Available with Outside Edge Profile.

See Page 3 for Frame Options. For Full Size Rail Drawer Fronts, Add Suffix “HG” to Door Code.

See Page 3 for Frame Options. For Full Size Rail Drawer Fronts Add Suffix “HG” to Doors Code.

3" 76.2 mm ( )

MX Stile/Rail + Reversed Panel(Available in Beaded or V-Groove)

ML Stile/Rail + Reversed Panel(Available in Beaded or V-Groove)

MH Stile/Rail + Reversed Panel(Available in Beaded or V-Groove)

Codes (Doors)

MX1 131mm 5 1/8

MX3 164mm 6 7/16

MXC 169mm 6 5/8

MXR 162mm 6 3/8

MXP, MXB, MXS 185mm 7 1/4

DX1 127mm 5

DX3 139mm 5 7/16

DXC 143mm 5 5/8

DXR 137mm 5 3/8

DXP, DXB, DXS 159mm 6 1/4

MINIMUM SIZES

Height & Width

D

r

a

w

e

r

D

o

o

r

Codes (Doors)

ML1 169mm 6 5/8

ML3 202mm 7 15/16

MLC 207mm 8 1/8

MLR 200mm 7 7/8

MLP, MLB, MLS 223mm 8 3/4

DL1 127mm 5

DL3 139mm 5 7/16

DLC 143mm 5 5/8

DLR 137mm 5 3/8

DLP, DLB, DLS 159mm 6 1/4

MINIMUM SIZES

Height & Width

D

o

o

r

D

r

a

w

e

r

Mitered Solid Wood Doors

Codes (Doors)

MH1 131mm 5 1/8

MH3 164mm 6 7/16

MHC 169mm 6 5/8

MHR 162mm 6 3/8

MHP, MHB, MHS 185mm 7 1/4

D

o

o

r

MINIMUM SIZES

Height & Width

13

MH3 HG Drawer


Standard MDF Doors14


M13 M14 M17

M11 M12 M15

M05 M06 M16

M01 M02 M09

M03 M04 M10

M07 M08 M18

M40 M41 M42

2" 50.8 mm ( )

1" 25.4 mmDrawer Size

( )(D01)

2" 50.8 mm ( )


( )(D03)

2" 50.8 mm ( )


( )(D05)

2" 50.8 mm ( )


( )(D07)

2" 50.8 mm ( )


( )(D11)

2" 50.8 mm ( )


( )(D13)

2" 50.8 mm ( )


( )(D40)

2" 50.8 mm ( )


( )(D40)

Square Shape Only MDF Doors

M94 2 pc. Recessed Panel Beaded Stile and Rail

M92 2 pc. Step Recessed Panel

M96 V-Groove Panel & V-Groove Through Stile and Rail

15

M86 V-Groove Raised Panel (Square Pattern Routered Only)

M95 Beaded (Washboard) Raised Panel

M34 2 pc. Chamfer Recessed Panel

M32 2 pc. Shaker Panel Recessed 1/4”


M38 2 pc. Shaker Panel Recessed 3/8”

2" (50.8 mm)

1" (25.4 mm)Drawer Size (D34)

2 1/4" (57.2 mm)

M70 Cove Panel

M89 2 pc. Cove Recessed Panel


1 1/4" (31.8 mm)Drawer Size (D32)

2 1/4" (57.2 mm)

2" (50.8 mm)

1 1/4" (31.8 mm)Drawer Size (D38)

2 1/4" (57.2 mm)

1 1/4" (31.8 mm)Drawer Size (D70)

2 1/4" (57.2 mm)

2 1/4" (57.2 mm)

1 1/4" (31.8 mm)Drawer Size (D95)

2 1/4" (57.2 mm)

1 1/4" (31.8 mm)Drawer Size (D96, D86)

2 1/4" (57.2 mm)


1 1/4" (31.8 mm)Drawer Size (D94)

2 1/4" (57.2 mm)

1 1/4" (31.8 mm)Drawer Size (D89)

2 1/4" (57.2 mm)

Plywood And Melamine Doors15

.9

Melamine Door .5mm Edge

MELAMINE DOOR .5MM EDGE

Melamine Door 3mm Edge

MELAMINE DOOR 3MM EDGE

3.0

15.9

19

.0

Plywood Door .5mm Edge

PLYPLYWOOD DOOR

.5MM EDGE

Plywood Door 3mm Edge

PLY3PLYWOOD DOOR

3MM EDGE

19

.05

3.00

!

!

!

5/8" (15.9mm) thick PB core slab melamine door.Matching Melamine BackEdges are edge-tapded using .5mm pvc edge tape.

!

!

!

White (MEL)Hard Rock Maple (MEL)Others (call for availability)

! No Frame Options available

Available in:

Summary:

!

!

!

5/8" (15.9mm) thick PB core slab melamine door.Matching Melamine BackEdges are edge-tapded using 3mm pvc edge tape.

Summary:

!

!

!

White (MEL3)Hard Rock Maple (MEL3)Others (call for availability)

! No Frame Options available

Available in:

!

!

3/4" (19.1mm) thick Veneer on Particle Board coreEdges are edge-tapded using 1/8” (3mm) veneer edge tape.

Summary:

!

!

!

!

OakCherryMapleOthers (call for availability)

! Use shaker wood frame of same wood type

Species:

Frame Option:

!

!

3/4" (19.1mm) thick Veneer on Particle Board coreEdges are edge-tapded using .5mm veneer edge tape.

Summary:

PLY PLY3

!

!

!

!

OakCherryMapleOthers (call for availability)

! Use shaker wood frame of same wood type with #13 profile on face and back

Species:

Frame Option:

MEL MEL3

16


Custom Mitered Doors like the ones shown here can be ready for delivery in 3 weeks. Set-up charges will apply. Available with any of our panel options.

Fridge Panel

TV Cut-Out

Arched Inside

Examples of Speaker GrillsAvailable with Vinyl & Groove

Vinyl & Groove Option Vinyl & Groove to wrap speaker cloth to Cloth Grill Insert (MDF) to wrap speaker cloth to

3 mm Glass Speaker ClothSpeaker Cloth

Speaker Grills Custom Mitered Doors

Custom Wood and MDF Doors17


Cove (2 1/4” Width)Shaker (2 1/4” Width) Ogee (2 1/4” Width) Pillow (2 1/4” Width) MG (2 1/4” Width) MK (3” Width)

MJ (2 1/4” Width) ME (2 1/4” Width) MY (2 1/4” Width) MX (3” Width) DG (1 3/4” Width)For Drawers

DK (1 3/4” Width)For Drawers

Speaker Grills Speaker Grill & Glass Options

For all Standard Wood, MDF and “MX” Mitered Doors

Door Outside Edge Profiles 18


Outside Bead(MDF Only)

3/8” Lip

1/4” Cove 1/4” Chamfer 1/4” Round

3/8” Round 3/8” Bead(3mm Drill Not Available)

1/4” Bead

1/8” Chamfer

Flat Ogee3mm Drill Not Available

1/8” RoundFinger Pull

Back Rabbet

MW Ogee

1/4” Lip Flat Cove

1/8” Lip 1/16’ Round

Standard(No Charge)

1/8 Notch

Sub ZeroLarge Radius 1/2” Round Over Cove Finger Pull

#7

#11

#3

#16

#26

#2

#6

#10

#14

#25

#66

#1

#5

#9

#13

#18

#31

#0

#4

#8

#12

#17

#27

#23

Drill Styles for Wood and MDF Doors

Standard Drilling for European Hinges:

Diameter: 35 mmOffset: typical 5mm from edge of door or your spec.Height: 95mm from door top & bottom to centre of holesDrilling Height and Offset are Adjustable.

Style A Drilling for European Hinges:Ferrari pattern

Same as standard with:Two holes for plastic knock-in dowels Diameter: 8.0 mm

Style D Drilling for European Hinges:Ferrari pattern

Same as standard with:Two pilot holes for screwsDiameter: 2.5 mm

Multiwood offers 3 basic drilling types for all our doors. Please specify the type needed at time of order. Custom drill styles are also available (pending approval). Please ask salesperson for details. Hinge drilling matches our Ferrari Clip-On Hinges.

**3 hinges recommended for doors greater than 42" / *** Please consult your particular hinge manufacturer's specs before ordering.

45.0

mm

9.5 mm

35

.0 m

m

8.0 mm

Drill Style A

As PerOrder

95

.0 m

m(U

nle

ss S

pe

cifie

dO

the

rwis

e)

10.0 mm deep

13.0 mm deep

45.0

mm

9.5 mm

35

.0 m

m

2.5 mm

Drill Style D

As PerOrder

95

.0 m

m(U

nle

ss S

pe

cifie

dO

the

rwis

e)

12.0 mm deep

13.0 mm deep

Standard Drilling

95

mm

Un

less

Sp

eci

fie

dO

the

rwis

e)

35

.0 m

m

As PerOrder

Available in all wood types and MDF.Made from Solid wood 3/4" thick, to your specifications. H=grain direction.

Large pieces can be made from MDF core plywood in various wood types as available.

Comes as a pair (front and back).

Bottle Neck

WNRK Diamond Style WAVE Style

Bottle Bottom

Wine Racks

Now available in stock.Sold in 8 Foot Lengths as a pair (front and back)

19


Valances

Specify All Dimensions, including F = number of arches.Available in all wood types + MDF. Custom Styles also available.

Scrollings

Cold Air Returns

Custom Fluted Columns

Custom sized columns are available in either dish or v-groove styles single sided or double sided. Please call with your dimensions for pricing.

Shelf Brackets / Corbels

254 [10]

203.2 [8] Standard Stock Item

Shelf brackets are available in all wood types and MDF. Available 3/4” thick or 1-1/2” thick.Stock: Oak, Maple, Cherry, MDF

Custom corbels and custom size shelf brackets also available by special order.

SHB Shelf Bracket (see moulding prices)

STD

Height

Width

Bread Boards & Butcher Blocks

Width

Height

Table Tops3/4” - 1 3/4” Thick

(2 1/4” - 3 ½” Laminations)

MBB - 3/4" thick

Width

Height

Bread Boards

Butcher Block Tops3/4” - 4” Thick

(13/16” Laminations)

7.94 [5/16”]

Cold Air returns are available in standard wood types as well as mdf. There are two stiles, plain and fancy.

Plain Fancy19.05 or 25.4 [3/4”] or [1”]

12.7 [1/2”]

Height

8 1/4" 16 24 32

Width

Standard Cold Air ReturnFinished Sizes

Scrollings can be Through cut or Face cut. Add a minimum 1" to size for 1/2 " border. Custom Sizes Also Available. 4 ½”

Height

10 16 24 34

12 18 26 36

14 20 28 38

Width

3 ½”

2 ½”

Standard Scrolling Sizes

20


Butcher Blocks & Table tops are G1Sunless otherwise requested

Multiwood's interior passage doors are available in Standard + MDF door profiles. They are built out of solid MDF or wood. Open frames or frames and mullion are also available. MDF passage doors are built with solid wood insert for hinge attachment. Doors illustrated below are examples only and can be modified to your specifications. Send Us your design for quotation.

Wood and MDF Passage Doors21


Wood and MDF Passage Doors22


Solid Wood Mouldings23

CW-031 1/4" x 3/4"

PN - 011" x 1 3/8"

3/4” Panel Mould

PN - 091 1/8" x 1 5/8"

3/4” Panel Mould

PN - 1013/16" x 2"

½”Panel Mould

PN - 0813/16" x 1 9/16”½”Panel Mould

PN - 061" x1/2"

3/4” Panel MouldAS - 01

3/8" x 3/4"AS - 07

5/16" x 1 1/4"

CE - 013/4" x 1 5/16"

OC - 021 1/16" x 1 1/16"

CW-021 1/8" x 9/16"

CV - 011/2" x 1/2"

PN - 461" X 1 3/4”

AS - 081/4" x 3/4"


CW - 201 5/16" x 2 5/8"

CW - 211 7/32" x 2 1/2"

CW - 041 1/8" x 1 7/8"

AS - 17 3/8" x 3/4"

AS - 401 1/2" x 3"

AS - 143/4" x 1 1/2"

AS - 167/8" x 1 3/4"

Solid Wood Mouldings

CR - 551 1/16" x 3 1/2"

CR - 453/4" x 3 1/4"

CR - 353/4" x 2 11/16"

CR - 063/4" x 4 3/4"

Covers: 3 5/16"W by 3 1/2"H

CR - 053/4" x 4 3/8"

Covers: 3 1/16"Hby 3 3/16"W

CR - 013/4" x 2 1/2"

Covers: 1 7/8"Hby 1 11/16"W

CR - 023/4" x 3 1/2"

Covers: 2 13/16"Hby 2 1/16"W

CR - 90 1 1/4" x 6"

Covers: 4 15/16"H y 3 7/16"W

CR - 803/4" x 3 3/4"

Covers 3"H by 2 5/16"W

CR - 95 1 3/16" x 6"

Covers: 4 7/8"H y 3 1/2”W

CR - 853/4" x 3 3/4"

Covers 3 1/6"H by 2 3/16"W

CR - 043/4" x 2 1/8"

Covers: 1 1/2"Hby 1 1/2"W

24


Solid Wood Mouldings

CS - 113/4" x 3 1/2"

CS - 083/4" x 3 1/4"

VA - 013/4" x 3"

PL - 021" x 6"

CR - 70 13/16" x 6"

Covers: 5"H by 3 3/8"W

CR - 6513/16" x 4 13/16”

Covers: 4”H by 2 5/8"W

CR - 6013/16" x 3 3/4"

Covers: 3 3/16"H by 2”W

FLU8” x 3/4” x 8’

25


5.0 Product Warranty26

PRODUCT WARRANTY

Products manufactured by Multiwood Inc. (hereinafter referred to as Multiwood) are warranted by Multiwood to be free from failure resulting from defects in material and/or workmanship, within the following limitations:

1. Multiwood agrees to repair or replace, at its option, any part of its own manufacture which proves to be defective, within six months, provided the products have not been subjected to unreasonable abuse or damage and have received reasonable care, commencing from the date of manufacture, provided such parts are returned prepaid to our factory and upon return, found to be defective in material or workmanship. Items that are not returned to our factory (prepaid) for our direct inspection/evaluation will not be warranted.

2. Multiwood will only repair or replace defective product in its original, unfinished state. Once it has been altered (including, but not limited to, chemically treated, painted, stained or lacquered) the warranty will become null and void (excepting structural failure).

3. Natural characteristics of the wood (including but not limited to knots, discoloration, mineral streaking, burl and grain pattern) will not be considered a defect unless specified on the original order. REFER to Wood Specifications

4. Subjecting products to excessive heat, cold or humidity, improper or incorrect installation of hardware or the improper application of finish is sufficient grounds for disqualification under this warranty.

5. Any component or part, whether manufactured by Multiwood or any others, which show signs of abuse, neglect, accident, improper handling, unauthorized alteration or use in such manner as was not intended shall be excluded from any warranties, expressed or implied.

6. Any part that Multiwood considers to be a maintenance item shall be excluded from any warranties, expressed or implied.7. All defective parts must be returned to our factory with all transportation, customs and duty charges prepaid.8. Any warranted replacement parts/products from Multiwood or other manufactures are shipped FOB (collect) from each

respective factory.9. All warranty work to be performed by others must be pre-approved in writing by Multiwood.10. Multiwood shall not be held liable for any extraneous charges, damages, delays or lost production caused by such defects in

material and/or workmanship as described above. The liability of Multiwood under this warranty is limited to the repair and/or replacement (at our option) as originally supplied, as set forth above, providing the claim is made within the above noted warranty period.

11. Any requests to alter our normal construction specifications are not guaranteed.12. Multiwood will only accept warranty claims on warped wood doors if the warpage is more than 1/16 per 18” of height for

doors under 24”wide, and 3/32 per 18” of height for doors over 24” wide, (1mm per 300mm of height for doors under 610mm wide, and 1.5mm per 300mm for doors wider than 610mm.). In ALL cases the maximum warranty heights are 42” (1067mm) or 50” ( 1270mm) with a cross rail and 28” for width.

13. There are no other warranties of any kind, expressed or implied.

Pertinent to Wood Mitered Doors:It is an inherent fact that wood will expand and contract with changes in weather and humidity. Almost all of this movement will occur across the grain. The width of the piece of wood will increase with an increase in humidity or decrease with a decrease in humidity. Mitered doors will react the same way. As the wood in a mitered door takes on moisture the joint will tend to open up on the outside edge of the door. A gap of .5mm is normal during high humidity conditions. If a mitered door loses moisture it will tend to open on the inside of the miter. Under normal humidity conditions mitered doors may open up .5mm. This will not be considered a warranty condition. This movement of wood is beyond our control and is an expected change.

This warranty is expressly in lieu of and supersedes all other warranties, expressed or implied, written or oral, including without limitation any warranties of merchantability or suitable for a particular purpose or application.

Warranty Administration - Please provide invoice for warrantiesAll warranty claims must be made, in writing, to:

Multiwood Inc.th11580 40 Street South East

Calgary, AlbertaT2C 1N9

within 10 days of the manifestation of the defect. Multiwood's obligation on warranty claims and Buyer's Remedy therefore shall be exclusively limited to, at Multiwood's option, any one of the following:

1. Replacing at Multiwood's factory any part proved to be defective,2. Remedying or repairing such defect, or3. Refunding the original purchase price in the form of a credit to be applied to future purchases.

Multiwood may require the return of (or upon Multiwood's prior written consent, Buyer may return) the alleged defective part, transportation charges to be paid by Buyer, before Multiwood recognizes any claim for defective workmanship or material. If the claim is not recognized, Buyer shall reimburse Multiwood for Multiwood's expenses in investigating the claim. Buyer shall pay travel and living expenses for any warranty work Multiwood determines must be undertaken at Buyer's site.

Limitation of LiabilityMultiwood's liability under this warranty will be limited to replacing or repairing the defective product at our option. In no case will Multiwood's liability exceed the contractual value of the order. Buyer's exclusive remedy for any loss or claim resulting from the use or inability to use this product shall be repair or replacement of the defective product, or, at the option of Multiwood, return of the product to Multiwood and refund of the original purchase price.

Finishing MapleWiping stain is not recommended on Maple. Multiwood will not be responsible for any colour or wood variations/defects on maple products when


Wood Door Sample Pricing

Custom Size Wood Door Pricing

*Soft raised panel doors are additional 5%

Height x Width sq. in c/sq. in Door c/sq. in Door c/sq. in Door c/sq. in Door c/sq. in Door

13" x 8 1/2" 111 15.12 $16.52 17.67 $19.26 24.09 $26.31 26.65 $29.06 25.30 $27.63

13" x 14 1/2" 189 10.98 $20.42 12.48 $23.17 17.66 $32.85 19.16 $35.59 18.55 $34.49

13" x 20 1/2" 267 9.02 $23.69 10.08 $26.43 15.00 $39.40 16.06 $42.14 15.75 $41.36

16" x 8 1/2" 136 13.75 $18.39 15.83 $21.14 21.38 $28.60 23.46 $31.35 22.45 $30.03

16" x 14 1/2" 232 9.81 $22.39 11.03 $25.14 16.11 $36.77 17.33 $39.51 16.91 $38.61

16" x 20 1/2" 328 8.28 $26.71 9.14 $29.46 13.75 $44.37 14.61 $47.12 14.44 $46.59

18" x 8 1/2" 153 12.82 $19.29 14.67 $22.04 20.20 $30.40 22.05 $33.15 21.21 $31.92 18" x 14 1/2" 261 9.29 $23.86 10.38 $26.60 14.63 $37.58 15.72 $40.32 15.37 $39.46

18" x 20 1/2" 369 7.88 $28.60 8.65 $31.35 12.69 $46.08 13.46 $48.83 13.33 $48.39

21 1/4" x 8 1/2" 181 11.71 $20.85 13.27 $23.59 18.35 $32.68 19.92 $35.43 19.27 $34.31

21 1/4" x 14 1/2" 308 8.57 $25.98 9.49 $28.72 14.08 $42.66 15.00 $45.41 14.78 $44.80

21 1/4" x 20 1/2" 436 7.29 $31.29 7.94 $34.03 12.42 $53.28 13.07 $56.03 13.04 $55.95

23 1/2" x 8 1/2" 200 11.54 $22.71 12.96 $25.46 16.61 $32.68 18.02 $35.43 17.44 $34.31

23 1/2" x 14 1/2" 341 8.23 $27.61 9.06 $30.36 13.15 $44.13 13.98 $46.87 13.81 $46.33

23 1/2" x 20 1/2" 482 7.05 $33.43 7.64 $36.17 11.87 $56.31 12.46 $59.05 12.47 $59.12

28" x 8 1/2" 238 10.68 $25.00 11.87 $27.75 15.35 $35.94 16.54 $38.69 16.12 $37.74

28" x 14 1/2" 406 7.85 $31.37 8.55 $34.11 12.49 $49.91 13.19 $52.66 13.12 $52.41

28" x 20 1/2" 574 6.71 $37.92 7.21 $40.66 11.30 $63.80 11.79 $66.55 11.86 $66.99

30 1/2" x 8 1/2" 259 9.97 $25.40 11.06 $28.14 14.75 $37.58 15.84 $40.32 15.48 $39.46

30 1/2" x 14 1/2" 442 7.35 $31.95 7.99 $34.69 12.33 $53.61 12.97 $56.35 12.94 $56.29

30 1/2" x 20 1/2" 625 6.33 $38.89 6.78 $41.64 11.32 $69.62 11.77 $72.36 11.89 $73.10

OW2 OW3

MWR/MSR/MC3

OW4

MW2

OP3/OWR/OC3/MP3

MW3 MW4MW1/MS1

OW1

27


Pricing Custom Height - Using door size that is closest to your door size, but smaller, find the square inch price for the right style of door. Now multiply the height by the width by the square inch price listed, rounding up dimensions to the next full inch.Pricing Custom Width - Calculate the same as Custom Height adding 15% to the cost.Please Note: The calculations above are for estimating purposes only, contact the order desk for an exact price.

MH mitered door styles are 30% more than their respective standard door styles.MT, ML and MN mitered door styles are 25% more than their respective standard door styles.MG, MJ, MK, MR and MX mitered door styles are 20% more than their respective standard door styles.V-Grooved and Beaded Panels add $7.00 per door.V-Groove through Stile & Rail add $7.00 per door.

Cabinet Door and Drawer Height Combinations

Box height 1 Door 1 Drawer 1 Door

384 (15 1/8") 382 (15 1/16")

672 (26 7/16") 670 (26 3/8")

704 (27 11/16") 702 (27 5/8") 189 (7 7/16") 510 (20 1/16") 189 (7 7/16") 2-254 (10")

768 (30 1/4") 765 (30 3/16”) 189 (7 7/16") 574 (22 9/16) 189 (7 7/16") 2-286 (11 1/4")

800 (31 1/2") 797 (31 7/16") 189 (7 7/16") 606 (23 7/8") 189 (7 7/16") 2-302 (11 7/8") 1-189 (7 7/16") 3-200 (7 7/8")

1088 (42 13/16") 1086 (42 3/4")

1376 (54 3/16") 1374 (54 1/8")

2048 (80 5/8") 2046 (80 9/16")

4 - 189 (7 7/16")

4 Drawers3 Drawers

Variations in Door and Drawer heights are possible in increments of 32mm(1 1/4"). If you want to reduce drawer height by 32mm(1 1/4"), add 32mm (1 1/4") to door. This will allow for the standard drilling of the doors to line up with the components.

Box Height Drawer 1 Door

Standard 800 (31 1/2") 189 (7 7/16") 606 (23 7/8") minus 32 (1 1/4") add 32 (1 1/4")

e.g. 800 (31 1/2") 157 (6 3/16") 638 (25 1/8") 638mm

158mm190mm

606mm

Before After

DFB (Solid Slab) PricingMultiply length by price

Prices are based on Oak. Multiply price shown bywood factor (see page 2) for other species

Frame pricing is based on Oak, MDF or Knotty Pine. Please multiply by wood factor to determine pricing for other material types.

To determine a frame's price, start from the same style of flat panel door, and add the up-charge cost. Frame styles illustrated on Page 3.

Type Charge

F $0.00F4 $14.64F6 $23.18F8 $31.72F9 $40.26F10 $48.80F12 $57.34

Solid Slab Drawer Pricing

Width

Price per

Lineal Inch Width

Price per

Lineal Inch

up to 4" 0.42 up to 9" 0.97

up to 5" 0.53 Up to 10" 1.08

up to 6" 0.63 Up to 11" 1.18

up to 7" 0.74 Up to 12" 1.30

up to 8" 0.86 Up to 13" 1.41

Style MDFMelabond

Back

$/sq.ft. $/sq.ft.

M00 6.25 6.88 Imperial Metric Imperial Metric Imperial Metric

M01 7.71 8.49 4 5/16" 109mm 6 5/16" 160mm 6 5/16" 160mm

M02 7.91 8.7 7 15/16" 202mm 6 5/16" 160mm

M03 7.91 8.7 5 1/4" 133mm 7 1/4" 184mm 7 1/4" 184mm

M04 8.12 8.94 8 7/8" 226mm 7 1/4" 184mm

M05 10.01 11.01 5 3/8" 136mm 7 3/8" 187mm 7 3/8" 187mm

M06 10.20 11.22 9" 229mm 7 3/8" 187mm

M07 10.20 11.22 6 5/16" 160mm 8 5/16" 211mm 8 5/16" 211mm

M08 10.40 11.44 9 15/16" 253mm 8 5/16" 211mm

M09 7.91 8.7 7 9/16" 192mm 6 5/16" 160mm

M10 8.12 8.94 8 1/2" 216mm 7 1/4" 184mm

M11 8.12 8.94 5 3/8" 136mm 7 3/8" 187mm 7 3/8" 187mm

M12 8.33 9.17 9" 229mm 7 3/8" 187mm

M13 8.12 8.94 6 5/16" 160mm 8 5/16" 211mm 8 5/16" 211mm

M14 8.33 9.17 9 15/16" 253mm 8 5/16" 211mm

M15 8.33 9.17 8 5/8" 219mm 7 3/8" 187mm

M16 10.20 11.22 8 5/8" 219mm 7 3/8" 187mm

M17 8.33 9.17 9 9/16" 243mm 8 5/16" 211mm

M18 10.40 11.44 8 5/16" 211mm 8 5/16" 211mm

M32 10.01 n/a 3 1/4" 83mm 5 1/4" 133mm 5 1/4" 133mm

M34 11.03 n/a 3 1/4" 83mm 5 1/4" 133mm 5 1/4" 133mm

M70 10.40 11.44 5 7/16" 138mm 7 7/16" 189mm 7 7/16" 189mm

M86 9.37 10.31 3 3/8" 86mm 5 3/8" 137mm 5 3/8" 137mm

M89 10.01 n/a 3 1/4" 83mm 5 1/4" 133mm 5 1/4" 133mm

M92 11.57 n/a 3 1/4" 83mm 5 1/4" 133mm 5 1/4" 133mm

M94 11.13 n/a 3 1/4" 83mm 5 1/4" 133mm 5 1/4" 133mm

M95 11.13 12.25 3 1/2" 89mm 5 1/2" 140mm 5 1/2" 140mm

M96 9.37 10.31 3 3/8" 86mm 5 3/8" 137mm 5 3/8" 137mm

Drawers Doors Doors/Drawers

MDF Doors

Minimum Height Minimum Width

Minimum Sizes - MDF Doors & Drawers

MDF Door Minimum Sizes and Pricing

28 Frame Pricing


Sheet Goods29

NOTE: Veneer Sheet Goods have Particle Core, NOT Plywood core.

*Subject to Availability

Slot Wall, Bead Board & V-Grooving Sheet Goods require minimum 5 days for delivery. Requires MDF core, call for pricing and availability.


Code Price Lift Price Code Price Lift Price

CA1 70.60$ 68.17$ PGTALD $48.57 n/a

CAP 94.19$ 91.05$ PGTCHY $42.72 n/a

CAP1 80.48$ 77.88$ PGTMPL $36.95 n/a

KA1 58.44$ 56.42$ PGTOAK $36.95 n/a

KAP 83.87$ 80.98$ PGTWAL $50.63 n/a

KAP1 65.53$ 63.27$ EWAL 141.75$ 136.50$

BA1 54.10$ 52.35$ EWEN 133.65$ 128.70$

BAP 76.95$ 74.30$ EZEB 141.75$ 136.50$

BAP1 68.54$ 66.33$ ERWO 141.75$ 136.50$

CH1 79.45$ 76.71$ ETEWEN $147.62 n/a

CHP 97.96$ 94.58$ ETEWAL $147.62 n/a

CHP1 80.23$ 77.64$ ETEZEB $147.62 n/a

MA1 50.90$ 49.14$ ETERWO $147.62 n/a

MAP121 71.78$ 69.30$ ETEWEN2 $230.58 n/a

MAC58 54.59$ 52.71$ ETEWAL2 $230.58 n/a

MAC 59.44$ 57.39$ ETEZEB2 $230.58 n/a

MAC1 52.61$ 50.79$ ETERWO2 $230.58 n/a

*MACS 54.23$ 52.36$ K3 26.22$ 18.01$

MAMD1BP 106.69$ 103.01$ FLX 96.11$ n/a

OA1 54.22$ 52.35$ FLXPLY 60.67$ n/a

OAP 63.45$ 61.26$ MB1 57.27$ 40.27$

QO1 66.25$ 64.30$ MD1 21.06$ 12.86$

QOP 86.15$ 83.54$ MD2 22.68$ 21.84$

WA1 87.85$ 85.02$ MD5 27.35$ 26.34$

WAP1 94.09$ 90.85$ MD7 23.36$ 22.49$

WAP 105.60$ 101.83$ MD7P 27.34$ 26.33$

BK1 23.13$ n/a MD7BP 49.06$ 47.24$

BK4 40.51$ n/a MD4 46.21$ 44.50$

ME2W 33.25$ 25.48$ MED 58.85$ n/a

ME5W 33.62$ 22.43$ BB12 40.37$ 38.87$

ME3W 39.04$ 29.32$ BB18 48.47$ 46.67$

ME2M 48.11$ 32.70$ SPR58 23.42$ 22.56$

ME5M 41.85$ 29.25$ SPR38 14.78$ 14.24$

ME3M 53.91$ 40.17$

PGTW White Preglued Edge Tape 27.84$ n/a PGTM 59.29$ n/a

Echo Wood Sheets and Edge Tapes Stocked in Limited Quantitys

1/4" MDF Flex. Kerfed 4' Way Ranger

HR Maple Preglued Edge Tape

3/4" Echo Rift WHITE OAK P/C G2S

.5mm Echo Qtr Wenge Veneer Raw ET

.5mm Echo Qtr Zebrawood Veneer Raw ET

.5mm Echo Rift White Oak Veneer Raw ET

2mm Echo Qtr Wenge Veneer Raw ET

2mm Echo Qtr Walnut Veneer Raw ET

2mm Echo Qtr Zebrawood Veneer Raw ET

2mm Echo Rift White Oak Veneer Raw ET

5/8" K-3 - Raw Particle Board

3/4" HR Maple Melamine 2 Sides

5/8" White Melamine 2 Sides




3/4" Walnut P/C A-1 G2S

1/4" White Backing - MDF 1 side

1/4" White / HR Maple Melamine Backing

1/4" Oak P/C A-4 G1S



1/4" Oak QTR Sawn P/C G1S




3/4" Alder Clear P/C A-4 G1S

1/4" Knotty Alder P/C C-4 G1S


3/4" Maple MDF Core Bead Board 3"cc 8'

3/4" Maple P/C CAB Grade G2S Shop

1/4" Cherry P/C A-4 G1S




1/4" Beech P/C G1S

3/4" MDF Premium Ranger

3/4" MDF Bead Board 3"cc 8' Shop

5/8 " Spruce Sheathing

Mahogany Flex 5mm x 95"x48", 4' Grain

3/4" MDF Melabond Back W1S Ranger


1/2” MDF Premium Ranger


3/4" MDF SHOP Ranger


1" MDF Premium Ranger

3/4" Medex Premium

12mm Baltic Birch - 60" x 60"

18mm Baltic Birch 60" x60"

Alder Veneer Preguled Edge Tape

Cherry Veneer Preglued Edge Tape

Maple Veneer Preglued Edge Tape

Oak Veneer Preglued Edge Tape

DESCRIPTION


.5mm Echo Qtr Walnut Veneer Raw ET

Walnut Veneer Preglued Edge Tape

3/4" Beech P/C G2S

3/4" Beech P/C G1S

3/4" Echo Qtr WALNUT P/C G2S

3/4" Echo Qtr WENGE P/C G2S

3/4" Echo Qtr ZEBRAWOOD P/C G2S

DESCRIPTION


3/4" Maple P/C CAB Grade G1S BWPF-4

1/4" Maple P/C B-4 G1S

1/2" Maple P/C BW-4 G1S



Melamine Cabinet Components - White Melamine, Maple Melamine, **White Melamine With Oak or Maple Veneer Edge (Not Stock Item allow 2 weeks)

Stock Cabinet Components30

Code Item White MapleWhite Melamine

Veneer Edge**

SG Stove Gable 15 1/8 x 12 1/8 384 x 308 $7.07 $8.47 $7.89

SG1 Stove Gable One 20 1/8 x 12 1/8 512 x 308 $9.32 $11.19 $10.01

SGS Stove Gable Special 26 1/2 x 12 1/8 672 x 308 $11.58 $16.00 $12.89

UG Upper Gable 31 1/2 x 12 1/8 800 x 308 $9.78 $13.51 $10.61

UG1 Upper Gable One 36 1/2 x 12 1/8 928 x 308 $11.58 $13.92 $12.89

UGS Upper Gable Special 42 7/8 x 12 1/8 1088 x 308 $13.91 $16.21 $14.91

DUG Douglas Upper Gable 36 1/2 x 15 7/8 928 x 404 $12.44 $14.31 $13.35

DGS Douglas Gable Special 42 7/8 x 15 7/8 1088 x 404 $14.60 $16.58 $15.65

MG Microwave Gable 15 1/8 x 15 7/8 384 x 404 $9.32 $11.19 $10.01

MG1 Microwave Gable One 20 1/8 x 15 7/8 512 x 404 $9.89 $11.88 $10.64

MGS Microwave Gable Special 26 1/2 x 15 7/8 672 x 404 $10.98 $13.19 $12.20

VG Vanity Gable 27 3/4 x 20 3/8 704 x 518 $12.48 $14.35 $13.91

VGS Vanity Gable Special 26 7/16 x 20 3/8 672 x 518 $12.48 $14.35 $13.91

FG Fridge Gable 15 1/8 x 23 1/2 384 x 596 $9.78 $12.26 $10.86

FG1 Fridge Gable One 20 1/8 x 23 1/2 512 x 596 $11.11 $12.78 $11.91

FGS Fridge Gable Special 26 1/2 x 23 1/2 672 x 596 $12.42 $14.28 $13.84

LG Lower Gable 31 1/2 x 23 1/2 800 x 596 $12.80 $14.71 $14.22

LGS Lower Gable Special 30 1/4 x 23 1/2 768 x 596 $12.80 $14.71 $14.22

PG Pantry Gable 80 5/8 x 23 1/2 2048 x 596 $30.86 $37.03 $34.30

PGS Pantry Gable Special 92 x 23 1/2 2336 x 596 $32.36 $38.81 $35.95

DUTB Drilled Upper Top/Bottom 96 x 12 1/8 2440 x 308 $29.77 $33.76 $33.06

DMWB Drilled Microwave Bottom 96 x 15 7/8 2440 x 404 $32.02 $36.67 $35.56

CN1 Corner Gable One 30 1/4 x 6 768 x 152 $9.78 $11.24 n/a

CN2 Corner Gable Two 35 1/4 x 6 896 x 152 $10.91 $12.57 n/a

CN3 Corner Gable Three 41 1/2 x 6 1056 x 152 $11.58 $13.30 n/a

CUS 22" Corner Upper Shelf (308 gable) 21 5/8 x 21 5/8 551 x 551 $10.96 $12.59 $12.30

CS1 26" Corner Upper Shelf (308 gable) 25 3/4 x 25 3/4 651 x 651 $12.69 $14.60 $14.03

DCS 26" Corner Upper Shelf (404 gable) 25 3/4 x 25 3/4 651 x 651 $15.37 $18.44 $16.69

CUB 22" Corner Upper Bottom (308 gable) 22 x 22 559 x 559 $10.96 $12.59 $12.28

CB1 26" Corner Upper Bottom (308 gable) 26 x 26 660 x 660 $12.69 $14.60 $14.03

DCB 26" Corner Upper Bottom (404 gable) 26 x 26 660 x 660 $15.37 $18.44 $16.70

CLB Corner Lower Bottom (596 gable) 31 1/2 x 31 1/2 800 x 800 $14.82 $17.05 $16.16

CL90 L Shaped Lower Bottom (596 gable) 36 x 36 914 x 914 $16.32 $18.75 $17.66

DSR Drawer Rail – Small (5/8" Rabbet) 97 x 4 2464 x 100 $8.25 $9.92 $9.57

DMR Drawer Rail – Medium (5/8" Rabbet) 97 x 5 2464 x 127 $9.35 $11.31 $10.67

DLR Drawer Rail – Large (5/8" Rabbet) 97 x 6 3/4 2464 x 170 $10.49 $12.73 $11.81

DXR Drawer Rail – Extra Large (5/8" Rabbet) 97 x 9 2464 x 230 $14.33 $17.53 $15.65

D4D Drawer Rail – Small (5/8" Dado) 97 x 4 2464 x 100 $12.49 $14.18 $13.83

D5D Drawer Rail – Medium (5/8" Dado) 97 x 5 2464 x 127 $13.60 $15.57 $14.93

D7D Drawer Rail – Large (5/8" Dado) 97 x 6 3/4 2464 x 170 $14.74 $16.99 $16.06

D9D Drawer Rail – Extra Large (5/8" Dado) 97 x 9 2464 x 230 $18.57 $21.79 $19.90

D12D Drawer Rail – File (5/8" Dado) 97 x 12 2464 x 308 $20.07 $25.26 $21.41

MDS Drawer Rail – Small 97 x 4 2464 x 100 $6.79 $8.47 $7.50

MDL Drawer Rail – Large 97 x 6 3/4 2464 x 170 $9.03 $11.28 $10.08

MDX Drawer Rail – Extra Large 97 x 9 2464 x 230 $12.87 $16.09 $13.76

US Upper Shelf 97 x 11 3/8 2464 x 288 $13.18 $17.15 $14.49

UTB Upper Top/Bottom 97 x 12 1/8 2464 x 308 $13.18 $17.15 $14.60

MWB Microwave Bottom 97 x 15 7/8 2464 x 404 $15.42 $20.07 $17.11

VB Vanity Bottom 97 x 20 3/8 2464 x 518 $22.35 $27.92 $24.68

LS Lower Shelf 97 x 22 5/8 2464 x 576 $22.35 $29.06 $24.84

LB Lower Bottom 97 x 23 1/2 2464 x 596 $22.50 $30.38 $25.00

SB Sink Bottom 97 x 25 1/2 2464 x 648 $24.32 $31.63 $25.78

MDWMPL 3/4" Maple Veneer P/C 3mm edge 2 Long 97 x 12 2464 x 304.8 n/a n/a $35.95

Size (Metric)

H W

Size (Imperial)

H W


Cabinet Hardware31

*All Hinges in Stock With or Without Knock-in Dowel Plugs

Edge Tape


Style Item Unit Price Pair/Case Case Price

AE14 14" Full Extension Slides - Accuride, Easy Close pair $23.70 10 $213.38





F6 6" Full Extension Slides - Accuride pair $14.64 10 $110.52









B12 12" Blumotion Runner Pairs/Locks - Regular pair $33.33 6 $179.98






BHD20 20" Blumotion Runner Pairs/Locks - Heavy Duty pair $56.33 6 $304.21

BHD22 22" Blumotion Runner Pairs/Locks - Heavy Duty pair $59.11 6 $319.15

BLUJIG Blumotion Tandem Bore Template - Jig for Installation of Slides ea $31.81

H11SOFT 110 Full Overlay Soft Close pair $9.46 100 $852.00

H10 110 Clip-On Inset Hinges w/ Mounting Plates - 5mm Drill pair $7.61 100 $685.08

H11 110 Clip-On Full Overlay Hinge w/ Mounting Plates - 5mm Drill pair $5.99 100 $538.19

H12 110 Clip-On Half Overlay Hinge w/ Mounting Plates - 5mm Drill pair $6.29 100 $566.05

H17 170 Clip-On Full Overlay Hinge w/ Mounting Plates - 5mm Drill pair $14.67 50 $659.76

H45 45 Clip-On Hinge w/ Mounting Plates - 5mm Drill pair $13.90 100 $1,249.86

HN45 Negative 45 Clip-On Hinge w/ Mounting Plates - 4.5mm Plate pair $13.90

HF1 110 Face Frame Hinge w/ Mounting Plates - 3mm Drill pair $7.61 150 $1,027.63

HLS Lasy Susan Hinge w/ Mounting Plates - 0mm Drill pair $14.49 100 $1,304.30

HPN 30" Brass Piano Hinge ea $7.47

DOWEL 8mm Dowels for Ferrari Hinges ea $0.10

SHIMS Bundle (12 pcs) 8" Cedar Shims ea $2.56 84 Bndls $193.61

SHIMLARGE Bundle (100 pcs) 8" Cedar Shims ea $10.98

retail Style Item Unit Price

PGTW 13/16" x 250' roll white preglued ET Roll $27.84

PGTM 13/16" x 250' roll hard rock maple preglued ET. Roll $59.29

PGTALD 13/16" x 250' roll alder veneer preguled ET. Roll $70.76

PGTWAL 13/16" x 250' roll walnut veneer preglued ET. Roll $50.63

PGTMPL 13/16" x 250' roll maple veneer preglued ET. Roll $36.96

PGTOAK 13/16" x 250' roll oak veneer preglued ET. Roll $36.96

PGTCHY 13/16" x 250' roll cherry veneer preglued ET. Roll $42.73

PGTBCH 13/16" x 250' roll beech veneer preglued ET. Roll $36.50

retail Style Item Unit Price

ETEWEN 0.5mm x 22mm x 550' roll echo Qtr Wenge veneer raw ET. Roll $147.62

ETEWAL 0.5mm x 22mm x 550' roll echo Qtr Walnut veneer raw ET. Roll $147.62

ETEZEB 0.5mm x 22mm x 550' roll echo Qtr Zebrawood veneer raw ET. Roll $147.62

ETERWO 0.5mm x 22mm x 550' roll echo rift cut white oak veneer raw ET. Roll $147.62

ETEWEN2 2mm x 22mm x 336' roll echo Qtr wenge veneer raw ET. Roll $231.19

ETEWAL2 2mm x 22mm x 336' roll echo Qtr walnut veneer raw ET. Roll $231.19

ETEZEB2 2mm x 22mm x 336' roll echo Qtr zebrawood veneer raw ET. Roll $231.19

ETERWO2 2mm x 22mm x 336' roll echo rift cut white oak veneer raw ET. Roll $231.19

Style Item Unit Price

WAMELS Wilsonart Melamine Glue 473ML ea $12.14

WA10S Wilsonart WA10 Blue 473ML ea $5.98

WA10M Wilsonart WA10 Blue 3.78L ea $29.02

WA10L Wilsonart WA10 Blue 18.9L ea $118.93

K28 28" Kidney lazy susan - 2 shelf, complete w/ hardware ea $81.40

R28 28" Round lazy susan - 2 shelf, complete w/ hardware ea $81.40

CAPW FastCap White Sticky Screw Cap - Sheet of 52 ea $2.75

CAPWC FastCap Maple Sticky Screw Cap - Package of 1040 pkg $38.98

CAPM FastCap Maple Sticky Screw Cap - Sheet of 52 ea $3.36

CAPMC FastCap Maple Sticky Screw Cap - Package of 1040 pkg $48.74

SHF Shelf support clips - 100 pkg, clear w/metal support pin pkg $6.81

BMP Rubber Door Bumpers - Sheet of 100, Clear ea $7.89

SCSP 13mm Euro Screw Pkg of 50 - #2 Phillips Head pkg $4.64

SCWC #6-5/8” Screw Pack of 100 - #1 Robertson Head pkg $4.15

SPR 1" Slide Spacer Set - Set of 4 w/ Mounting Screws set $4.15

CAPMPL Maple Veneer Sticky Screw Cap Sheet of 52 ea $4.45

CAPMPLC Maple Veneer Sticky Screw Cap Package of 260 pkg $19.83

CAPOAK Oak Veneer Sticky Screw Cap Sheet of 52 ea $4.45

CAPOAKC Oak Veneer Sticky Screw Cap Package of 260 pkg $19.83

Style Item Unit Price

OIL 500ml denatured mineral oil - butcher block treatment ea $6.97

CSB411 10x80T chopsaw blade - ATB neg rake-moulding ea $91.50

CSB431 10x50T combination blade - Positive rake-all round ea $91.50

CSB445 10x80T blade - Triple chip flat top (Melamine) ea $109.80

DB5 5mm Brad Point Drill - For Shelf Clip Holes (Right Hand) ea $19.84

HSM20 500 - M4 X 20 PAN HEAD ROBERTSON box $34.16




HSI78 100 - #8 X 7/8 TRUSS HEAD PHILLIPS box $21.96

HSI1 100 - #8 X 1 TRUSS HEAD PHILLIPS box $21.96

HSI125 100 - #8 X 1 1/4 TRUSS HEAD PHILLIPS box $25.62

HSI150 100 - #8 X 1 1/2 TRUSS HEAD PHILLIPS box $26.84

DB5CHK Adapter Chuck 1/4" hex to DB5 ea $23.79

CC48 48" x 250' corrugated packing cardboard - 1 Side ea $92.17

CC30 30" x 250' corrugated packing cardboard - 1 Side ea $69.30

WRAP Bubble Wrap 48'' x 250" Roll ea $139.26

FOAM 3/32 X 48 X 750' PERF AT 1/2" roll $232.11

Wood Moulding Prices

32


Solid Lumber - S4F & S3R

Price per lineal foot. / Random Lengths

S3R

Moulding Poplar Oak White Maple CherryAS-01 $0.88 $1.22 $1.32 $2.03AS-07 $0.88 $0.94 $1.28 $1.63AS-08 $0.54 $0.72 $0.81 $0.99AS-14 $1.32 $1.85 $2.16 $3.20AS-16 $1.55 $2.15 $2.55 $3.72AS-17 $0.88 $1.22 $1.32 $2.03AS-40 $4.38 $6.88 $9.09 $13.05AS-75 $1.10 $1.28 $1.78 $2.16AS-975 $1.10 $1.28 $1.78 $2.16CE-01 $1.18 $1.57 $2.17 $3.18CR-01 $1.54 $2.43 $2.84 $4.16CR-02 $2.15 $3.21 $3.81 $5.49CR-04 $1.37 $2.15 $2.60 $3.88CR-05 $2.85 $4.22 $5.61 $8.20CR-06 $3.20 $4.58 $5.84 $7.81CR-35 $1.78 $2.96 $3.60 $5.37CR-45 $2.24 $3.42 $4.27 $6.22CR-55 $3.25 $4.45 $6.71 $8.91CR-60 $2.57 $3.57 $4.51 $6.14CR-65 $3.29 $4.58 $5.61 $9.88CR-70 $4.04 $5.49 $7.44 $11.83CR-80 $2.57 $3.57 $4.58 $6.14

Moulding Poplar Oak White Maple CherryCR-85 $2.65 $3.68 $4.58 $6.31CR-90 $6.38 $9.70 $13.18 $17.20CR-95 $6.38 $9.70 $13.18 $17.20CS-08 $1.73 $2.99 $3.75 $5.14CS-11 $2.17 $3.01 $4.03 $5.20CV-01 $0.70 $0.99 $1.12 $1.50CW-02 $0.81 $1.37 $1.56 $2.33CW-03 $0.94 $1.54 $1.73 $3.07CW-04 $2.09 $3.55 $4.64 $6.04CW-20 $3.05 $4.82 $5.86 $7.44CW-21 $3.05 $4.82 $5.86 $7.44OC-02 $1.40 $2.15 $2.76 $3.72PL-02 $4.32 $7.26 $9.46 $12.32PN-01 $0.96 $1.54 $1.62 $2.61PN-06 $0.93 $1.22 $1.28 $2.07PN-08 $1.34 $2.34 $3.17 $4.06PN-09 $1.37 $2.56 $3.42 $4.37PN-10 $1.56 $2.49 $3.28 $4.12PN-16 $0.95 $1.46 $1.88 $2.53PN-46 $1.49 $2.56 $2.70 $4.45VA-01 $2.10 $3.18 $4.03 $6.37

CODE SIZE NET PRICE CODE SIZE NET PRICE

1X2ALD 1x2 3/4" x 1-1/2" $2.65 1X2CHY 1x2 3/4" x 1-1/2" $3.861X3ALD 1x3 3/4" x 2-1/2" $3.86 1X3CHY 1x3 3/4" x 2-1/2" $5.901X4ALD 1x4 3/4" x 3-1/2" $5.11 1X4CHY 1x4 3/4" x 3-1/2" $7.961X6ALD 1x6 3/4" x 5-1/2" $6.83 1X6CHY 1x6 3/4" x 5-1/2" $10.891X8ALD 1x8 3/4" x 7-1/4" $8.86 1X8CHY 1x8 3/4" x 7-1/4" $14.171X10ALD 1x10 3/4" x 9-1/4" $11.09 1X10CHY 1x10 3/4" x 9-1/4" $17.88

CODE SIZE NET PRICE CODE SIZE NET PRICE

1X2MPL 1x2 3/4" x 1-1/2" $2.34 1X2OAK 1x2 3/4" x 1-1/2" $2.261X3MPL 1x3 3/4" x 2-1/2" $3.36 1X3OAK 1x3 3/4" x 2-1/2" $3.241X4MPL 1x4 3/4" x 3-1/2" $4.37 1X4OAK 1x4 3/4" x 3-1/2" $4.221X6MPL 1x6 3/4" x 5-1/2" $5.82 1X6OAK 1x6 3/4" x 5-1/2" $5.581X8MPL 1x8 3/4" x 7-1/4" $7.50 1X8OAK 1x8 3/4" x 7-1/4" $7.221X10MPL 1x10 3/4" x 9-1/4" $9.37 1X10OAK 1x10 3/4" x 9-1/4" $8.98

CODE Description SIZE PRICE / BFT

S3RALD Clear Alder 3/4" X RW $10.32S3RBCH Beech 3/4" X RW $9.59S3RCHY Cherry 3/4" X RW $16.36

S3RKA Knotty Alder 3/4" X RW $5.09

S3RMPL Maple 3/4" X RW $8.78

S3ROAK Oak 3/4" X RW $8.45

S3RPOP Poplar 3/4" X RW $6.11

S3RQO Qtr. Sawn Oak 3/4" X RW $14.16S3RWAL Walnut 3/4" X RW $18.96Random width and length , planed and two faces, straight line ripped one edge. Pricing per board foot.

, sanded

CODE Description Price / ft

AS07MDF Bullnose Door Stop 3/8 x 1-1/4 $0.23

JAMBMDF MDF Flatjamb 11/16 x 4-9/16 $0.65JAMB69MDF MDF Flatjamb 11/16 x 6-9/16 $0.94

MDF Door Jamb Material

33


Company: Date: PO#

Phone: Fax: Pick Up � Ship � Via:

Job Reference: Ship Address:

Site Address: City: PROV:

Code QTY Code QTY

CA1 PGTALD

CAP PGTCHY

CAP1 PGTMPL

KA1 PGTOAK

KAP PGTWAL

KAP1 EWAL

BA1 EWEN

BAP EZEB

BAP1 ERWO

CH1 ETEWEN

CHP ETEWAL

CHP1 ETEZEB

MA1 ETERWO

MAP121 ETEWEN2

MAC58 ETEWAL2

MAC ETEZEB2

MAC1 ETERWO2

*MACS K3

MAMD1BP FLX

OA1 FLXPLY

OAP MB1

QO1 MD1

QOP MD2

WA1 MD5

WAP1 MD7

WAP MD7P

BK1 MD7BP

BK4 MD4

ME2W MED

ME5W BB12

ME3W BB18

ME2M SPR58

ME5M SPR38

ME3M

PGTW White Preglued Edge Tape PGTM

Echo Wood Sheets and Edge Tapes Stocked in Limited Quantitys

1/4" MDF Flex. Kerfed 4' Way Ranger

HR Maple Preglued Edge Tape

3/4" Echo Rift WHITE OAK P/C G2S

.5mm Echo Qtr Wenge Veneer Raw ET

.5mm Echo Qtr Zebrawood V eneer Raw ET

.5mm Echo Rift White Oak Veneer Raw ET

2mm Echo Qtr Wenge Veneer Raw ET

2mm Echo Qtr Walnut Veneer Raw ET

2mm Echo Qtr Zebrawood Veneer Raw ET

2mm Echo Rift White Oak Veneer Raw ET

5/8" K-3 - Raw Particle Board







1/4" White Backing - MDF 1 side

1/4" White / HR Maple Melamine Backing











3/4" Maple MDF Core Bead Board 3"cc 8'

3/4" Maple P/C CAB Grade G2S Shop





1/4" Beech P/C G1S


3/4" MDF Bead Board 3"cc 8' Shop


Mahogany Flex 5mm x 95"x48", 4' Grain

3/4" MDF Melabond Back W1S Ranger


1/2” MDF Premium Ranger


3/4" MDF SHOP Ranger


1" MDF Premium Ranger

3/4" Medex Premium

12mm Baltic Birch - 60" x 60"

18mm Baltic Birch 60" x60"

Alder Veneer Preguled Edge Tape

Cherry Veneer Preglued Edge Tape

Maple Veneer Preglued Edge Tape

Oak Veneer Preglued Edge Tape

DESCRIPTION


.5mm Echo Qtr Walnut Veneer Raw ET

Walnut Veneer Preglued Edge Tape

3/4" Beech P/C G2S

3/4" Beech P/C G1S

3/4" Echo Qtr WALNUT P/C G2S

3/4" Echo Qtr WENGE P/C G2S

3/4" Echo Qtr ZEBRAWOOD P/C G2S

DESCRIPTION



1/4" Maple P/C B-4 G1S

1/2" Maple P/C BW-4 G1S



Sheets Goods Order Form

Sheets Goods Order Form Sheets/Hardware Order Form34


C o d e I t e m U n i t Q u a n t i ty P a i r s / C a s e C a s e s

A E 1 4 1 4 " F u ll E x t e n s i o n S li d e s , E a s y C lo s e p a ir 1 0





F 6 6 " F u l l E x t e n s i o n S l id e s p a ir 1 0

F 8 8 " F u l l E x t e n s i o n S l id e s p a ir 1 0

F 1 0 1 0 " F u ll E x t e n s i o n S li d e s p a ir 1 0







B 1 2 1 2 " B lu m o t i o n p a ir s / lo c k s - re g u la r p a ir 6






B H D 2 0 2 0 " B lu m o t i o n p a ir s / lo c k s - H D p a ir 6

B H D 2 2 2 2 " B lu m o t i o n p a ir s / lo c k s - H D p a ir 6

B L U J I G B lu m o t io n T a n d e m B o re T e m p l a t e e a 1

P G T W W h it e P re g lu e d E d g e T a p e R o l l

P G T M H a rd R o c k M a p le P re g lu e d E d g e T a p e R o l l

P G T A L D A ld e r V e n e e r P r e g u le d E d g e T a p e R o l l

P G T C H Y C h e r r y V e n e e r P re g lu e d E d g e T a p e R o l l

P G T M P L M a p le V e n e e r P r e g lu e d E d g e T a p e R o l l

P G T O A K O a k V e n e e r P re g lu e d E d g e T a p e R o l l

P G T W A L W a ln u t V e n e e r P re g lu e d E d g e T a p e R o l l

E T E W E N 0 . 5 m m E c h o Q t r W e n g e V e n e e r R a w E d g e T a p e R o l l

E T E W A L 0 . 5 m m E c h o Q t r W a l n u t V e n e e r R a w E d g e T a p e R o l l

E T E Z E B 0 . 5 m m E c h o Q t r Z e b r a w o o d V e n e e r R a w E d g e T a p e R o l lE T E R W O 0 . 5 m m E c h o R if t C u t W h it e O a k V e n e e r R a w E d g e T a p e R o l l

E T E W E N 2 2 m m E c h o Q t r W e n g e V e n e e r R a w E d g e T a p e R o l l

E T E W A L 2 2 m m E c h o Q t r W a ln u t V e n e e r R a w E d g e T a p e R o l l

E T E Z E B 2 2 m m E c h o Q t r Z e b ra w o o d V e n e e r R a w E d g e T a p e R o l l

E T E R W O 2 2 m m E c h o R if t C u t W h it e O a k V e n e e r R a w E d g e T a p e R o l l

H 1 1 S O F T 1 1 0 F u ll O v e r la y S o f t C lo s e p a ir 1 0 0

H 1 0 1 1 0 C l ip -O n I n s e t H in g e s p a ir 1 0 0

H 1 1 1 1 0 C l ip -O n F u l l O v e r l a y H in g e p a ir 1 0 0

H 1 2 1 1 0 C l ip -O n H a l f O v e r la y H i n g e p a ir 1 0 0

H 1 7 1 7 0 C l ip -O n F u l l O v e r l a y H in g e p a ir 5 0

H 4 5 4 5 C lip - O n H in g e p a ir 1 0 0

H N 4 5 N e g a t i v e 4 5 C l ip -O n H in g e p a ir

S O F T C L O S E S o f t c l o s e s c re w o n d a m p e r e a 2 0 0

H F 1 1 1 0 F a c e F r a m e H i n g e p a ir 1 5 0

H L S L a s y S u s a n H i n g e w / M o u n t in g P la t e s p a ir 1 0 0

H P N 3 0 " B ra s s P i a n o H I n g e e a

K 2 8 2 8 " k i d n e y l a zy s u s a n D O W E L 8 m m D o w e l s fo r F e r r a r i H i n g e s

R 2 8 2 8 " r o u n d l a zy s u s a n C S B 4 1 1 1 0 " X 8 0 T C h o p s a w B l a d e

C A P W w h i te s t i c k y s c r e w c a p C S B 4 3 1 1 0 " X 5 0 T C o m b i n a ti o n B l a d e

C A P M m a p l e s t i c k y s c r e w c a p C S B 4 4 5 1 0 " X 8 0 T T r i p l e C h i p B l a d e

C A P M P L w h i te v e n e e r s c r e w c a p D B 5 5 m m B r a d P o i n t D r i l l

C A P O A K m a p l e v e n e e r s c r e w c a p O IL 5 0 0 M L M i n e r a l O i l

B M P R u b b e r D o o r B u m p e r s W A M E L S W i l s o n a r t m e l a m i n e g l u e 4 7 3 M L

S H F S h e l f S u p p o r t C l i p s W A 1 0 S W i l s o n a r t W A 1 0 B l u e 4 7 3 M L

S P R 1 " S l i d e S p a c e r S e t W A 1 0 M W i l s o n a r t W A 1 0 B l u e 3 .7 8 L

H S M 2 0 5 0 0 M 4 X 2 0 r o b e r ts o n W A 1 0 L W i l s o n a r t W A 1 0 B l u e 1 8 .9 L

H S M 2 5 5 0 0 M 4 X 2 5 r o b e r ts o n FO A M 3 /3 2 x4 8 x7 5 0 ' 1 /2 "P E R F

H S M 3 5 5 0 0 M 4 X 3 5 r o b e r ts o n W R A P B u b b l e W r a p 4 8 '' x 2 5 0 "

H S M 4 0 5 0 0 M 4 X 4 0 r o b e r ts o n C C 4 8 4 8 " x 2 5 0 ' c o r r u g a te d c a r d b o a r d

H S I 7 8 5 0 0 # 8 X 7 /8 p h i l l i p s C C 3 0 3 0 " x 2 5 0 ' c o r r u g a te d c a r d b o a r d

H S I 1 5 0 0 # 8 X 1 p h i l l i p s S H IM S B u n d l e ( 1 2 p c s ) 8 " C e d a r S h i m s

H S I 1 2 5 5 0 0 # 8 X 1 1 /4 p h i l l i p s S H IM L A R G E B u n d l e ( 1 0 0 p c s ) 8 " C e d a r S h i m s

H S I 1 5 0 5 0 0 # 8 X 1 1 /2 p h i l l i p s S O FT C L O S E S o ft c l o s e s c r e w o n d a m p e r

S C W C # 6 - 5 /8 ” S c r e w 1 0 0 /p k W A 7 0 0 A W i l s o n a r t 7 0 0 A C o n ta c t 4 7 0 .6 g

S C S P 1 3 m m e u r o s c w 5 0 /p k


Com pany: Date: PO#Phone: Fax: Pick Up P Ship P Via:

Job Reference: Ship Addre ss:Site Address: City: PROV:

W= White Melamine M=HR Maple Melam ine

Code Qty. W Qty. M Item Goes With

SG Stove Gable UTB (308mm )SG1 Stove Gable One UTB (308mm )

SGS Stove Gable Special UTB (308mm )UG Upper Gable UTB (308mm )

UG1 Upper Gable One UTB (308mm )UGS Upper Gable Special UTB (308mm )

DUG Douglass Upper Gable MWB (404m m)

DGS Douglass Gable Special MWB (404m m)MG Microwave Gable MWB (404m m)

MG1 Microwave Gable One MWB (404m m)MGS Microwave Gable Special MWB (404m m)

VG Vanity Gable VB (518m m)VGS Vanity Gable Special VB (518m m)

FG Fridge Gable LB (596mm )FG1 Fridge Gable One LB (596mm )

FGS Fridge Gable Special LB (596mm )

LG Lower Gable LB (596mm )LGS Lower Gable Special LB (596mm )

PG Panty Gable LB (596mm )PGS Pantry Gable Special LB (596mm )

DUTB Dril led Upper Top/Bottom US or UTBDMWB Dril led Microwave Bottom MWB

CUS 22" Corner Upper Shelf (308 gable) CUB & CN(#)*CUB 22" Corner Upper Bottom (308 gable) 308 W gables

CS1 26" Corner Upper Shelf (308 gable) CB1 & CN (#)*CB1 26" Corner Upper Bottom (308 gable) 308 W gables

DCS 26" Corner Upper Shelf (404 gable) CB1 & CN (#)*DCB 26" Corner Upper Bottom (404 gable) 404 W gables

CN1* Corner Shelf Gable One (CUS/CS1/DCS) 800 H gables

CN2* Corner Shelf Gable Two (CUS/CS1/DCS) 928 H gablesCN3* Corner Shelf Gable Three (CUS/CS1/DCS) 1088 H gables

CLB Corner Lower B ottom (Round Lazy Susan) 596 W gablesCL90 L Shaped Lower Bottom (Kidney Lazy Susan) 596 W gables

MDWMPL Drawer Rail 3/4" Maple Veneer (3mm edge)

DSR Drawer Rail Sm all ( 5/8" R abbet- bott om f lush) 5/8" bottoms

DMR Drawer Rail Medium ( 5/8" R abbet- bott om f lush) 5/8" bottoms

DLR Drawer Rail Large ( 5/8" R abbet- bott om f lush) 5/8" bottoms

DX R Drawer Rail XLarge ( 5/8" R abbet- bott om f lush) 5/8" bottoms

D4D Drawer Rail Sm all ( 5/8" Da do up 12 mm /B LU M) 5/8" bottoms

D5D Drawer Rail Medium ( 5/8" Da do up 12 mm /B LU M) 5/8" bottoms

D7 D Drawer Rail Large ( 5/8" Da do up 12 mm /B LU M) 5/8" bottoms

D9D Drawer Rail XLarge ( 5/8" Da do up 12 mm /B LU M) 5/8" bottoms

D12D Drawer Rail File ( 5/8" Da do up 12 mm /B LU M) 5/8" bottoms

MDS Drawer Rail Sm all

MDL Drawer Rail Large MDX Drawer Rail XLarge

US Upper Shelf (UTB- 20m m fo r Screw R ail & Ba cker) 308 W gablesUTB Upper Top Bottom 308 W gables

MWB Microwave B ottom 404 W gables

VB Vanity Bottom 518 W gablesLS Lower Shelf (L B- 20m m fo r Screw R ail & Ba cker) 596 W gables

LB Lower Bottom 596 W gablesSB Sink Bottom

Size HxW(Imp.)

15 1/8 x 12 1/8

Size HxW(Metric)

384 x 308

31 1/2 x 12 1/8 800 x 308

36 1/2 x 12 1/8 928 x 308

20 1/8 x 12 1/8 512 x 308

26 1/2 x 12 1/8 672 x 308

42 7/8 x 15 7/8 1088 x 404

15 1/8 x 15 7/8 384 x 404

42 7/8 x 12 1/8 1088 x 308

36 1/2 x 15 7/8 928 x 404

27 3/4 x 20 3/8 704 x 51826 7/16 x 20 3/8 672 x 518

20 1/8 x 15 7/8 512 x 40426 1/2 x 15 7/8 672 x 404

26 1/2 x 23 1/2 672 x 59631 1/2 x 23 1/2 800 x 596

15 1/8 x 23 1/2 384 x 59620 1/8 x 23 1/2 512 x 596

92 x 23 1/2 2336 x 596

96 x 12 1/8 2440 x 308

30 1/4 x 23 1/2 768 x 596

80 5/8 x 23 1/2 2048 x 596

22 x 22 559 X 559

25 3/4 x 25 3/4 651 X 651

97 x 15 7/8 2440 x 404

21 5/8 x 21 5/8 551 x 551

26 x 26 661 X 660

30 1/4 x 6 768 X 152

26 x 26 660 X 660

25 3/4 x 25 3/4 652 X 651

31 1/2 x 31 1/2 800 x 800

36 x 36 914 x 914

35 1/4 x 6 896 X 152

36 1/4 x 6 1056 X 152

96 x 5 2440 x 127

96 x 6 3/4 2440 x 170

96 x 12 2440 x 304.8

96 x 4 2440 x 100

96 x 5 2440 x 12796 x 6 3/4 2440 x 170

96 x 9 2440 x 230

96 x 4 2440 x 100

96 x 20 3/8 2440 x 518

96 x 9 2440 x 23096 x 9 2440 x 308

96 x 6 3/4 2440 x 170

96 x 11 3/8 2440 x 288

96 x 4 2440 x 100

96 x 15 7/8 2440 x 404

96 x 9 2440 x 230

96 x 12 1/8 2440 x 308

96 x 22 5/8 2440 x 576

96 x 25 1/2 2440 x 64896 x 23 1/2 2440 x 596

Cabinet Components Order Form35

Reference:

Site Address:

Pick - up Ship Via:

Ship Address:

Company:

Ordered by:

Phone:

Fax:

Po:Date:

City: Prov:


S4S, S4F, S3R, Moulding Order Form36

S4F & S3R

Moulding Order Form Mouldings

S 4 F S 3 R

Thickness Width (net) LF Wood Type Wood Type Board Feet Required Wood Type Board Feet Required

Knotty Alder Cherry

Clear Alder White Hard Maple

Oak Walnut

QTR Sawn Oak Other (Specify):

Style Quantity(LF) Wood Type Style Quantity(LF) Wood Type Style Quantity(LF) Wood Type

AS - 01 CR - 60 PN - 06

AS - 07 CR - 65 PN - 08

AS - 08 CR - 70 PN - 09

AS - 14 CR - 80 PN - 10

AS - 16 CR - 85 PN - 16

AS - 17 CR - 90 PN - 46

AS - 40 CR - 95 VA - 01

AS - 75 CS - 08 FLU (8')

AS - 975 CS - 11 SHBALD

CE - 01 CV - 01 SHBCHY

CR - 01 CW - 02 SHBMPL

CR - 02 CW - 03 SHBOAK

CR - 04 CW - 04 SHBPOP

CR - 05 CW - 20 SHBLALD

CR - 06 CW - 21 SHBLCHY

CR - 35 OC - 02 SHBLMPL

CR - 45 PL - 02 SHBLOAK

CR - 55 PN - 01 SHBLPOP

AL DE R CH ER RY

CO DE SI Z E NE T Q T Y / L F T CO DE SIZ E NE T Q T Y / L F T

1X 2AL D 1 x2 3 /4" x 1 -1/2" 1X 2C HY 1x 2 3 /4" x 1 -1 /2"1X 3AL D 1 x3 3 /4" x 2 -1/2" 1X 3C HY 1x 3 3 /4" x 2 -1 /2"1X 4AL D 1 x4 3 /4" x 3 -1/2" 1X 4C HY 1x 4 3 /4" x 3 -1 /2"1X 6AL D 1 x6 3 /4" x 5 -1/2" 1X 6C HY 1x 6 3 /4" x 5 -1 /2"1X 8AL D 1 x8 3 /4" x 7 -1/4" 1X 8C HY 1x 8 3 /4" x 7 -1 /4"1X 10 AL D 1x 1 0 3 /4" x 9 -1/4" 1X 10 CHY 1x 10 3 /4" x 9 -1 /4"

M AP L E O AKCO DE SI Z E NE T Q T Y / L F T CO DE SIZ E NE T Q T Y / L F T

1X 2M P L 1 x2 3 /4" x 1 -1/2" 1X 2O AK 1x 2 3 /4" x 1 -1 /2"1X 3M P L 1 x3 3 /4" x 2 -1/2" 1X 3O AK 1x 3 3 /4" x 2 -1 /2"1X 4M P L 1 x4 3 /4" x 3 -1/2" 1X 4O AK 1x 4 3 /4" x 3 -1 /2"1X 6M P L 1 x6 3 /4" x 5 -1/2" 1X 6O AK 1x 6 3 /4" x 5 -1 /2"1X 8M P L 1 x8 3 /4" x 7 -1/4" 1X 8O AK 1x 8 3 /4" x 7 -1 /4"1X 10 M PL 1x 1 0 3 /4" x 9 -1/4" 1X 10 O AK 1x 10 3 /4" x 9 -1 /4"

Door Order Form37


Standard DoorsClient:______________________________________________ Contact:______________________________

M DF Doors

Call #:_________________________Fax #:_________________________Reference:_______________________

Site Address:________________________________________PO#_________________ Pickup / Delivery

Delivery Address:________________________________________________ Ship Via?:_________________

Woodtype:____________________________ Drill Offset: 5mm Offset / Custom Offset :___________

Doors Drawers: Full size Rail

Style:________________ Edge Profile:__________ Style:_____________ Edge Profile:__________

Stile Width:___________ Rail Width:___________ Stile Width:___________ Rail Width:___________Notes Notes

M iter Doors L R (Frame, F4, F6? DP/TP, VP/BP) (Side-by-side, VP/BP)

Wood Panels

Drawers: Slabs or Reduced Rail

Style:_____________ Edge Profile:__________

Stile Width:___________ Rail Width:___________Notes

(Side-by-side, VP/BP)

Edge Prof iles Edge Prof iles

Width

Qty Height Width

Qty

Drill

Drill Style: STD __ A __ D __

Height

Qty Height Width

Cathedral

Double EyebrowDouble Cathedral Frame - F9Frame F8Frame - F6

Square

Frame - F4Frame - F

Half Eyebrow-RHalf Eyebrow-LEyebrowHalf Cathedral-RHalf Cathedral-L

Door Shape

Stile/Rail Panel Drawer Options

Outside Edge Profile

Other Options

Vinyl & Groove?

Drill Style?: Std. A D Offset:____mm

Wood Type? ____________

Standard Door Selection Sheet

Customer O.K._________________________________

Quote/Order #____________________

38


3/8” Bead

#5

Flat Cove

#10

1/4” Lip

#8

3/8” Lip

#7

1/4” Bead

#6

3/8” Round

#4

1/4” Round

#3

1/4” Chamfer

#2

1/4” Cove

#1

Standard

#0

Finger Pull

#12

1/8” Round

#13

MW Ogee

#16

1/8” Chamfer

#14

Flat Ogee

#11

Sub Zero

#66#31

Cove Finger Pull1/8 Notch

#25

1/16’ Round

#18

1/8” Lip

#17

Large Radius

#26

Back Rabbet

#9

1/2” Round Over

#27

Slab

Full Size Rail

Reduced Rail

Reverse

Soft

Bevel

Pearl

Multiwood

Cove

Ply

V-Grooved

Beaded

Yes No

Shaker Pillow

Ogee

Cove V-Groove Through

Bevel Shaker

Lip Stretch

Mitered Door Selection Sheet

Stile/Rail

ML - Mu l l i ons no t ava i l ab le fo r f rames .

MX - A l l f r ame op t i ons and a l l ou ts ide p ro f i l es ava i l ab le .

MR - A l l f r ench f rame op t i ons ava i l ab le .

MH - Mu l l i ons no t ava i l ab le fo r f rames .

MN - A l l f r ench f rame op t i ons ava i l ab le .

MT - A l l f r ench f rame op t i ons ava i l ab le .

Frame - F9Frame F8Frame - F6Frame - F4Frame - FSquare

Other Options

Door ShapeQuote/Order #____________________

Outside Edge Profile - Only Available for MX

39


Vinyl & Groove?


Wood Type? ____________

Customer O.K._________________________________Yes No

Sub Zero Ply

#77

3/8” Bead

#5

Flat Cove

#10

1/4” Lip

#8

3/8” Lip

#7

1/4” Bead

#6

3/8” Round

#4

1/4” Round

#3

1/4” Chamfer

#2

1/4” Cove

#1

Standard

#0

Finger Pull

#12

1/8” Round

#13

MW Ogee

#16

1/8” Chamfer

#14

Flat Ogee

#11

#31

Cove Finger Pull1/8 Notch

#25

1/16’ Round

#18

1/8” Lip

#17

Large Radius

#26

Back Rabbet

#9

1/2” Round Over

#27

Panel Drawer Options

Slab

Full Size Rail

Reduced Rail

Reverse

Soft

Bevel

Pearl

Multiwood

Cove

Ply

V-Grooved

Beaded

MDF Door Selection Sheet

Other Options

Quote/Order #____________________

Outside Edge Profile

MDF Door Profile Square Shape Only MDF Door Profile

Door Shape

Drawer Options

40


Cathedral Double EyebrowDouble Cathedral

Frame - F9Frame F8Frame - F6

Square

Frame - F4Frame - F

Eyebrow

M32

M96

M95

M86

M70

M94

M92

M89

M38

M34

M11 - SquareM12 - CathedralM15 - Eyebrow







Vinyl & Groove?


Customer O.K._________________________________Yes No

Outside Bead

#23

3/8” Bead

#5

Flat Cove

#10

1/4” Lip

#8

3/8” Lip

#7

1/4” Bead

#6

3/8” Round

#4

1/4” Round

#3

1/4” Chamfer

#2

1/4” Cove

#1

Standard

#0

Finger Pull

#12

1/8” Round

#13

MW Ogee

#16

1/8” Chamfer

#14

Flat Ogee

#11

Sub Zero

#66

Cove Finger Pull

#31

1/16’ Round

#18

1/8” Lip

#17

Large Radius

#26

Back Rabbet

#9

1/2” Round Over

#27

1/8 Notch

#25

Slab

Full Size Rail

Reduced Rail

Dovetail Drawer Boxes41

Scoop Handle Types for Internal Drawers

mm mm

57 mm 2 1/4 2.25" 57 mm 2 1/4 2.25"

85 mm 3 3/8 3.375" 85 mm 3 3/8 3.375"

105 mm 4 1/8 4.125" 105 mm 4 1/8 4.125"

140 mm 5 1/2 5.5" 140 mm 5 1/2 5.5"

175 mm 6 7/8 6.875" 150 mm 5 15/16 5.9375"

230 mm 9 1/16 9.0625" 175 mm 6 7/8 6.875"

261 mm 10 1/4 10.25" 230 mm 9 1/16 9.0625"

261 mm 10 1/4 10.25"

inches inches

MAPLE , HARD WHITE, 15mm( 11mm,3/8" bottom)

STANDARD DRAWER HEIGHTS

BIRCH UV, 16mm ( 6.35mm,1/4" bottom)

Example Pricing

BUILT FOR BLUE MOTION TAMDEM SLIDES, BACK NOTCHED, WITH CLIPS INSTALLED.

ICW DEPTH HEIGHT Solid Solid Baltic Baltic Solid MapleBirch/Melamine Birch/Plywood 6mm 12mm Plywood

8 x 20 x 4 1/8 39.97$ 47.24$ 58.16$ 60.28$ 62.17$ 8 x 20 x 6 7/8 47.43$ 54.70$ 67.00$ 67.91$ 75.68$

16 x 22 x 2 1/4 38.25$ 46.09$ 55.38$ 57.86$ 61.80$ 16 x 22 x 3 3/8 43.19$ 51.03$ 59.46$ 61.98$ 68.15$ 16 x 22 x 4 1/8 45.33$ 53.17$ 62.17$ 65.60$ 70.91$ 16 x 22 x 5 1/2 51.74$ 57.75$ 66.25$ 69.30$ 78.06$ 16 x 22 x 6 7/8 54.84$ 62.68$ 72.24$ 74.30$ 87.65$ 16 x 22 x 9 1/16 71.92$ 79.76$ 77.08$ 79.25$ 106.36$ 16 x 22 x 10 1/4 77.25$ 85.09$ 80.77$ 84.34$ 118.62$

32 x 22 x 4 1/8 54.50$ 63.41$ 69.23$ 75.04$ 85.72$ 32 x 22 x 6 7/8 67.30$ 76.19$ 81.26$ 85.47$ 107.65$ 32 x 22 x 9 1/16 86.97$ 95.86$ 87.22$ 91.80$ 132.38$


Catalogue

Documents

knotty wood

hard wood mouldings

alder alder

wide variety of wood

wood typealder clear

domestic wood types

wood factors upcharge

knotty alder sound knots