INNOVATIVE VISION OUR VISION HAS NO LIMITS
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CATA
LOGU
E 20
17 -
201
8BO
LLÉ
SAFE
TY
INNOVATIVE VISION
OUR VISION HAS NO LIMITS
WHAT TYPE OF PROTECTION SHOULD YOU CHOOSE?
HIGH PERFORMANCE PROTECTION ADAPTED TO YOUR TRADE.
Assessment of occupational risks involves; 1. Identifying
2. Assessing 3. Ranking risks in the workplace in order to implement
relevant preventive measures.To comply with occupational health and safety standards it is vital to check that the risk identified, the directives of the standard and the
markings on the product all align.For further information, ask for our training booklet.
P 40
The I, V, F, B or A symbol must imperatively be indicated on the lens and the frame to guarantee protection from mechanical risks. If the symbols differ, the symbol representing the lowest resistance applies to the protection as a whole.
PROTECT YOURSELF FROM MECHANICAL RISKSGrinding work, particle projections, projections of metal filings or debris from tools.
RUSH+TOP PRODUCT
RUSH+ model, page 40
RISKS OR USE SYMBOL* SPECTACLES GOGGLES /
HELMETSFACE
SHIELDS STANDARD
Medium impact 45 m/s I or F* AS/NZS
1337.1.2010
High impact 120 m/s
V or B*
AS/NZS 1337.1.2010
High energy impact 190 m/s
A AS/NZS 1337.1.2010
9
Risks or use Symbol* SPECTACLES GOGGLES /
HELMETSFACE
SHIELDS STANDARD
Splatters of molten metals and hot solids
M or 9* EN166
The M or 9 symbol must imperatively be indicated on the lens and the frame to guarantee protection from thermal risks.
*Second letter or number is that specified in the EN & proposed ISO standard. Future revision of the Australia standards will specify this marking where there is currently an alternative. See the marking in position page 18.
PROTECT YOURSELF FROM THERMAL RISKSProtection from hot liquids or solids, intense heat radiation, radiating from furnaces.
P 56
BLAST
TOP PRODUCT
RISKS OR USE SYMBOL* SPECTACLES GOGGLES /
HELMETSFACE
SHIELDS STANDARD
Short-circuit electric arc 8 EN166
The 8 symbol must imperatively be indicated on the lens and the frame to guarantee protection from electrical risks.
PROTECT YOURSELF FROM ELECTRICAL RISKSProtection from live contact and short-circuit electric arcs.
P 67
SPHERE
TOP PRODUCT
RISKS OR USE SYMBOL* SPECTACLES GOGGLES /
HELMETSFACE
SHIELDS STANDARD
Ultraviolet radiation 2 or 3
AS/NZS 1337.1.2010
&AS/NZS
1338.3.2012
Infrared radiation 4
AS/NZS 1337.1.2010
&AS/NZS
1338.3.2012
Electric welding
EN175 for the hood
EN379 for the filter
EN166-169EN175EN379
Gas welding 1.7/3/5 AS/NZS
1337.1.2010
The standard is identified on the lens markings.
PROTECT YOURSELF FROM RADIATION RISKSExposure of the eyes to high intensity, ultraviolet, infrared and visible light sources, welding activities, steelworks, surgery.
SILIUM+TOP PRODUCT
P 46
RISKS OR USE SYMBOL* SPECTACLES GOGGLES /
HELMETSFACE
SHIELDS STANDARD
Liquid droplets C or 3* AS/NZS
1337.1.2010
Liquid splashes C or 3* AS/NZS
1337.1.2010
Large dust particles > 5 microns
D or 4* AS/NZS 1337.1.2010
Gas and fine dust particles < 5 microns
G or 5* AS/NZS 1337.1.2010
The C, D, G, 3, 4 and 5 symbol or symbols must imperatively be indicated on the lens. If none of these symbols is indicated in the markings, then the equipment is not suitable for chemical risks.
PROTECT YOURSELF FROM CHEMICAL RISKS Protection from toxic dust, aerosols, dangerous liquids, gases or toxic vapours.
PILOT 2
TOP PRODUCT
P 61
COBRA model, page 27
ClearAmber
IR
100%
0%
50%0% 100%
of Bollé Safety lenses filter 99.99% of UVA/UVB radiation. 98%
of Bollé safety spectacles are manufactured from polycarbonate.
Polycarbonate combines comfort and protection: ultra resistant (20 times more resistant than conventional mineral glass)
ultra light (20g on average for a single lens) ultra thin (2.2 mm on average)
95%
of Bollé Safety lenses absorb UV radiation. 99%
THIS IS WHY BOLLÉ SAFETY HAS MADE EYE SAFETY ITS NUMBER ONE PRIORITY...
Bollé Safety is constantly innovating to guarantee optimum protection for your eyes with lens coatings that filter out the
harmful rays and improve your visual comfort.
A COMPLETE LINE OF LENSES
EXCELLENT TRANSMISSIONOF LIGHT
TOTAL ABSORPTION
OF BLUE LIGHT
LOWABSORPTION
OF BLUE LIGHT
LOW TRANSMISSIONOF LIGHT
SmokeWelding 3
Welding 5
Flash*
*Silver, red and blue flash
11
Extra Sensory Perception
THE WINNING COMBINATION FOR ALL CONDITIONS!
Like ESP, this innovative coating is an effective solution for all activities that alternate exposure to bright light and low light. CSP is ideal for cold and hot countries while also being suitable for extreme temperature environments. CSP technology filters 52% of blue light and is combined with the exclusive coating to effectively combat fogging and provide permanent visual comfort from a single pair of spectacles.
is available on the following models: BAXTER, SILIUM+ and PILOT 2.
COMBATS GLARE DURING FREQUENT SWITCHES FROM INDOORS TO OUTDOORS
ESP combines the advantages of clear and tinted lenses in a single model. It reduces glare when passing from a shaded zone to a bright zone and efficiently filters blue light.
ADVANTAGES:
Offers blue light filtration (57%) / visible light transmission (64%), which is a good ratio.
Is perfect for indoor/outdoor work.
is available on the RUSH+ and CONTOUR (SIDEWINDER) models.
FOR INDOOR / OUTDOOR USE
Comfort Sensitivity Perception
SILIUM+ P 46
Without polarised lenses With polarised lenses
SMOKEOutdoor use only. Filters UVA and UVB (99.99%). It provides maximum protection from solar radiation.
FLASHThe flash lens reflects heat. Ideal for outside use in full sunshine. It can be combined with the polarised coating.
FOR OUTDOOR USE
IDEAL FOR OUTDOOR USE IN LOW LIGHT CONDITIONS Recommended for outdoor work at dawn and at dusk, TWILIGHT is a shield against blue light. Contrasts are accentuated for better visibility and the inner/outer anti-fog coating is effective even in the most extreme conditions.
ADVANTAGES:
Improves contrast in low light
Absorbs blue light effectively (76%)
Is compatible with the coating
Offers perfect optical quality and 99.99% protection against UVA/UVB and solar radiation
is available in the RUSH, RUSH+, RUSH+ SEAL and COBRA MODELS.
AN END TO GLARE! POLARISED technology is ideal for use in all outdoor activities in which there is a high risk of glare. POLARISED technology offers incomparable comfort by eliminating both glare and reflections. All Bollé Safety’s polarised lenses are injection moulded. This optically precise polarising film is embedded into the lens ensuring it won’t wear or scratch off the lens.
ADVANTAGES:
Eliminates glare due to light reflection
Improves colour perception and visual comfort
Improves perception of contrast and depth
Reduces eye strain
Offers perfect optical quality and 99.99% protection against UVA/UVB and solar radiation
is available on the CONTOUR (SIDEWINDER), HUSTLER, HUSTLER SEAL, PROWLER, HURRICANE, JET, PHANTOM, BAXTER and VOODOO MODELS.
Protection from UV and infra-red radiation linked to certain welding activities that do not require a welding helmet to be worn.
Available in Shade 3 for the CONCEPT WELDING and TRACKER 2 WELDING models. Available in Shade 5 for the CONCEPT WELDING, TRACKER 2 WELDING and COBRA WELDING models.
WELDING
13
Primarily for Indoor use.
Safety spectacles with clear lenses are essential indoors. To encourage employees to wear the spectacles Bollé Safety offers a wide range of models, all available with clear lenses.
ADVANTAGES: Crystal clear lens
Ideal for working indoors
Exceptional visual clarity and transmission of light with a rate of 92% 99.9% UVA/UVB Protection
CLEAR
FOR INDOOR USE
FOR BETTER INDOOR WORKING COMFORTThe CONTRAST coating is applied as a graduation and recommended to combat the aggression of working under artificial lighting. Ideal for activity at a static workstation using neons, halogens or other sources of blue light that can affect the eyes.
The CONTRAST coating protects from the harmful effects on the retina and the crystalline lens of the eye. It reduces eye fatigue, providing optimum working comfort and improving contrast and relief.
ADVANTAGES: Thanks to its UVA/UVB absorbers and mirror coating, the contrast coating reduces heating of the cornea
which is a main cause of conjunctivitis
Filters over 30% of blue light, which can cause headaches and eye strain
Due to its coating that reflects the heat, it delays crystalline lens ageing, and reduces the likelihood of cataracts
Serves as a barrier to impact and light pollution (neon and halogen light, etc.)
Preserves colour, improves contrast and depth perception
is available on the RUSH+ model.
Acetate Lenses Use Compatible with
®
UV light absorption: 280-380 nm
Visible light transmission: 380-780 nm
Infrared light absorption:
780-1400 nm
Blue light absorption: 380-500 nm
Clear 99.99% 89% 10% 10%
Bollé Safety offers the new, exclusive scratch and fog resistant coating on many models (see the coating specifications for each model in your catalogue).
Polycarbonate Lenses (PC) Use Compatible with
®
UV light absorption:280-380 nm
Visible light transmission: 380-780 nm
Infrared light absorption:
780-1400 nm
Blue light absorption: 380-500 nm
Clear 99.99% 92% 13% 10%
99.99% 82% 30% 30%
Amber 99.99% 90% 9% 56%
99.99% 64% 28% 62%
99.99% 63% 14% 52%
99.99% 43% 19% 76%
99.99% 10% 13% 91%
Smoke 99.99% 13% 56% 86%
99.99% 10% 47% 89%
99.99% 13% 60% 89%
Silver flash 99.99% 13% 57% 86%
Welding 3 99.99% 21% 97% 98%
Welding 5 99.99% 2% 99% 99%
A COMPLETE LINE OF LENSES
Blue flash
Red flash
HOW TO CARE FOR AND CLEAN YOUR EYE PROTECTION ?
DON’TsDO’s
Use a clean microfibre soft cloth to dry the lenses
Always carry and store your spectacles in a protective case/pouch.
Spectacles or face shields which are scratched or whose frame is damagedmust be replaced
Never use hot water which can alter/damage the coatings (anti-reflective, anti-fog...)
Do not place your glasses with the lenses facing downward
Never use your clothes, fingers or general purpose tissues to clean lenses
Do not clean with any solvent or alcohol based cleaning product
You must place the glasses under cold water before any washing in order to remove any dust
Clean the lenses softly with our cleansing solutions or
impregnated wipes
bollesafety.com.au
Related Documents
