catalogo 01

i

BuckinghamBuckingham and Safety StandardS

OSHA

The Occupational Safety and Health Administration (OSHA) has spelled out certain requirements for equipment used in the construction (including power line construction) and telecommunications industries. These standards are under Title 29, CFR Chapter XVII, Parts 1910 and 1926 as detailed below.• Part 1910.67 (c) (2) (V) and 1926.556 (b) (2) (V) apply specifically to extensible and articulation boom platforms — belting

requirements.• Part 1910.268 (g) (2) (i and ii) applies specifically to telecommunications and personal climbing equipment for use in that

industry.• 1910.269 applies to electric power generation, transmission and distribution, electrical protection equipment.• Part 1926.104 (e) and (f) applies to safety belts, lifelines and lanyards used primarily in the construction industry.• Part 1926.959 applies specifically to linemens’ body belts, pole straps and lanyards. (Other than in telecommunications

covered in 1910.268).• Part 1926.951k, Tool and Protective Equipment, deal with the care and use of personal climbing equipment. Other require-

ments and/or standards may be issued.

ANSI Z359

The American National Standards Institute (ANSI) in Z359 establishes requirements for the performance, design, marking, qualification, instruction, training, use, maintenance and removal from service of connectors, full body harnesses, lanyards, energy absorbers, anchorage connectors, fall arresters, vertical lifelines, and self-retracting lanyards comprising personal fall arrest systems. The ANSI Z359 Fall Protection Code currently includes nine standards:• Z359.0-2009“DefinitionsandNomenclatureUsedforFallProtectionandFallArrest”• Z359.1-2007“SafetyRequirementsforPersonalFallArrestSystems,SubsystemsandComponents"• Z359.2-2007“MinimumRequirementsforaComprehensiveManagedFallProtectionProgram"• Z359.3-2007“SafetyRequirementsforPositioningandTravelRestraintSystems”• Z359.4-2007“SafetyRequirementsforAssisted-RescueandSelf-RescueSystems,SubsystemsandComponents”• Z359.6-2009“SpecificationandDesignRequirementsforActiveFallProtectionSystems”• Z359.12-2009“ConnectingComponentsforPersonalFallArrestSystems”• Z359.13-2009“PersonalEnergyAbsorbersandEnergyAbsorbingLanyards”

ASTM

TheAmericanSocietyforTestingandMaterials(ASTM)hasrevisedtheEdisonElectricalInstitute(EEI)“SpecificationsforLinemen’sClimbingEquipment”AP-21973.ThenewstandardisASTMF887,“StandardSpecificationsforPersonalClimbingEquipment.”

CSA

CSA International is a provider of third party product testing and certification services for compliance to national and international standards. The CSA Certification mark, generally required by the Canandian market, indicates that a product has been evaluated by their process (examination, testing and follow-up inspection) and complies to the requirements of the applicable standard for which the product is labeled. •CSA-Z259.1-05-Bodybeltsandsaddlesforworkpositioningandtravelrestraint•CSA-Z259.2.2-98(Reaffirmed2004)-Selfretractingdevicesforpersonalfall-arrestsystem•CSA-Z259.10-06-FullBodyHarness•CSA-Z259.11-05-EnergyAbsorbersandLanyards•CSA-Z259.12-01-ConnectingComponentsFor(PFAS)•CSA-Z259.14-01-FallRestrictEquipmentForWoodPoleClimbing.

Our Guarantee

Weguaranteetheequipmentwemanufacturetobefreefromdefectsinmaterialandworkmanship.Wewillrepair or replace any equipment defective which is returned to us. This express guarantee supersedes all other expressed or implied guarantees, obligations or liabilities.

If you have questions about a product or its intended use, please contact us between 8:00 a.m. and 5:00 p.m.,EasternTime,MondaythroughFriday,at(607)773-2400.

ii

Buckingham manufacturingBuckinghamManufacturingCompanyhasproudlyservedindustrieswith workers who climb wood poles, trees, towers and structures that support electricity and telecommunications equipment for well over 100years.Whetherforworkaboveorbelowgroundintheseindus-tries, we produce safety equipment and specialty tools for work posi-tioning, retrieval, fall restraint, fall restriction, fall arrest and suspension workapplications.Mostpeopledonotthinkabouttheimportanceof work performed by linemen every day until the power goes out, the telephone/computer stops working or a tree falls on a house or power line. Our customers maintain and restore services in all types of weather. This catalog is a tribute to these highly trained workers performing dangerous jobs with little recognition!

Buck ToughKnowingthedangersoftheseindustries,wemakeourproductsBuckTough.Theyaredesignedforroughuseand no product is made without thorough testing and inspection. This includes the raw materials, in-process manufacturing and the finished product.

Buck TestedWhenmultiplestandardscanbeappliedtoaproduct,Buckinghamusesthetougheststandardforcompliance.AndtomakesureweareuptodateonstandardswearemembersofANSI,ASTMandCSA.

Buckinghamiscommittedtodevelopnewproductsforourcustomersthataretopqualityandsafe.Wewillcon-tinue to listen to our customers to improve existing products and develop new. Our products will be produced withtheutmostattentiontoqualityandsafetyprovidingourcustomersassuranceofbeingBuckToughandBuckTested.

Product ApplicationTo help you use this catalog, most products are accompanied by a symbol that indicates whether the product is intended for fall arrest, work positioning, suspension, retrieval, or fall restraint.

Fall Arrest System:A product specifically designed to arrest a fall from an elevated position.

Suspension System:Equipment designed to suspend or lower a person to a work site. Not intended to arrest a fall.

Work Positioning System & Wood Pole Fall Restriction Device

Fall Restraint System:Equipment designed & used to prevent the worker from reach-ing an area where a free fall could occur.

Retrieval System:Equipment used to evacuate a person from an area in an upright position. Not intended to arrest a fall unless also equipped for fall arrest.

• AmericanSocietyforTestingandMaterials(ASTM)• AmericanSocietyofSafetyEngineers(ASSE)• GreaterBinghamtonChamberofCommerce• InternationalSafetyEquipmentAssociation(ISEA)• InternationalSocietyofArborculture(ISA)

• NationalAssociationofManufacturers(NAM)• NationalAssociationofTowerErectors(NATE)• NortheastPublicPowerAssociation• TreeCareIndustryAssociation(TCIA)• UnitedWay

Membership in Professional Trade Associations & Community Involvement

iii

taBle of contentSSafety Standards ............................................................................................................................................iYour Partner in Safety ....................................................................................................................................ii

climbers 1Climber Information & Options ....................................................................................................... 2Pole Climbers .................................................................................................................................. 8Tree Climbers ................................................................................................................................ 10

climber accessories 13Climber Pads ................................................................................................................................ 14Climber Straps .............................................................................................................................. 19Climber Accessories ............................................................................................................... 18, 20

Body Belts 21BodyBeltInformation ................................................................................................................... 22FullFloatBodyBelts ..................................................................................................................... 24Semi-FloatBodyBelts ................................................................................................................... 28LadderBelts............................................................................................................................ 28, 84 BodyBeltAccessories .................................................................................................................. 29

Pouches & holsters 31Pouches & Holsters....................................................................................................................... 32MiscellaneousHolsters ................................................................................................................. 33LeatherNut&BoltBags ............................................................................................................... 35CarryBelts .................................................................................................................................... 35

Positioning Straps & rescue Products 37LockingSnapHooks ..................................................................................................................... 38Positioning Straps ......................................................................................................................... 39BuckSqueezeWoodPoleFallProtection ..................................................................................... 41Practice Pole Top Rescue System ................................................................................................ 42

knives & tools 43Knives & Scissors ......................................................................................................................... 44Reels&Lifts .................................................................................................................................. 46Strand&WireDispenser ............................................................................................................... 46ManholeHooks ............................................................................................................................. 46GroundRodDriver ........................................................................................................................ 46Staple Sticks ................................................................................................................................. 47Staple Puller .................................................................................................................................. 47Thread Restorers .......................................................................................................................... 47

guards & Scabbards 49

canvas & fiberglass 53Aerial Accessories ........................................................................................................................ 55Nut&BoltBags............................................................................................................................. 58ToolBags ...................................................................................................................................... 60UtilityBags .................................................................................................................................... 62NoseBags .................................................................................................................................... 63Buckets ......................................................................................................................................... 65GloveBags ................................................................................................................................... 67Sleeve Rollups .............................................................................................................................. 68Safety Canvas Items ..................................................................................................................... 69Specialty Canvas Items ................................................................................................................ 71HydraulicTool&BatteryStorageBags ........................................................................................ 72

iv

MeshBags .................................................................................................................................... 73Fiberglass Accessories................................................................................................................. 74

fall Protection 79Harnesses ..................................................................................................................................... 80 ShockAbsorbingLanyards .......................................................................................................... 90 Tower Rescue Harnesses for Steel Structure Fall Pro ................................................................... 96 Dual,SpecialtyandTieBackShockAbsorbingLanyards ........................................................... 98RopeandCableGrabs ................................................................................................................. 99TowerFallProtectionStepBoltsandFlanges ............................................................................. 100RetractableLifelineandAnchorageDevices ............................................................................. 101ApprenticeLinemen'sFallProtection ........................................................................................ 102BucketTruck&SuspensionRescueSystems ............................................................................ 103VerticalLifeLinesandAnchorSlings ........................................................................................ 107Roof Top Fall Protection Systems ............................................................................................... 108 Confined Space Retrieval Systems ............................................................................................. 109 BuckLadderLockSystem .......................................................................................................... 113 BuckStepSuspensionTraumaRescueSystem .......................................................................... 113

Promotional Products 115

index 119

2Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425www.buckinghammfg.com

Climber information & optionsWe at Buckingham are committed to making sure that our equipment can help you be safe at work. Our skilled crafts-men make the widest choice of climbers and options to provide each user with proper fit and comfort. All of our leg irons and gaffs are inspected throughout the manufacturing process and samples from each lot are tested to destruc-tion. Buckingham climbers are rated to 350 lbs. when the user is fully outfitted with tools and equipment.

Inspect Your Climbers As Well As All Safety Equipment Before Each Use!

Twisted ShankA twisted shank follows the contour of the calf muscle to help reduce chafing. (Add suffix ‘T’ to part #.)

Contoured& Non Contoured ShankThe Contoured Shank top is straight with an outward projection to accommodate the ankle bone. The Non Contoured Shank is straight from the top of the sleeve to the base of the gaff.

Offset& Straight StirrupsA straight climber stirrup rests slightly on the back of the arch. An offset climber stirrup sits in the center of the foot.

Offset Stirrup

Straight Stirrup

TwistedShank*

Non ContouredShank (T)

ContouredShank (TB)

Adjustable Length Climber Sleeves

Standard Chrome Sleeve [9204]Long Chrome Sleeve [9202](See How to Order Climbers on the next page for sleeve ranges and widths.)

Cleated Climbers

Model TB95089S

With 2 threaded replaceable cleat like logger spikes in the stirrup of the climber for traction climbing in wet & in damp conditions. Sold with 12 replace-ment cleats & wrench. To order, add an ‘S’ suffix to the climber number.

Replaceable Gaff ClimbersScrew Style Replaceable Gaff: Available on all Titanium and Steel replaceable gaff climbers.

Pin Style Replaceable Gaff: for all existing steel replaceable gaff climbers in the field. Buckingham no longer manufactures pin style replaceable gaff climbers.

Gaff Types Permanent Pole:• Standard 1 3/4” [4.4cm]

• CCA 1 5/8” [4.1cm]

Permanent Tree:• Tree 3 ½” [8.9cm]

Screw Style Replaceable Pole:• Standard 1 3/4” [4.4cm]

• CCA 1 5/8” [4.1cm]

Pin Style Replaceable Pole:• Standard 1 3/4” [4.4cm]• CCA 1 11/16” [4.3cm]

Replaceable Tree:• Tree 2 ¾” [7cm]

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425www.buckinghammfg.com3

Daily Climber Inspection Requirements• Visible Cracks - usually a fine jagged line• Cuts or marks in the steel - create stress risers causing the

climber to break at that point• Make sure loop on climber sleeve is secure• Make sure footstrap ring or loop is secured to climber stirrup• Use two fasteners to secure the sleeve to the climber• Inspect climber straps for cuts and excessive wear• Make sure the pad loops are secure and free of cuts and are

not worn thin• Inspect climber stirrup to be sure it's not worn too thin

IF ANY OF ThESE CONDITIONS ExIST, DISCONTINUE USE IMMEDIATELY.

Proper Fit & ComfortBuckingham believes that proper fit and comfort affect a person’s ability to climb. An ill-fitting climber distracts the wearer. This is why we offer the industry’s widest choice of climber styles and features.

how to Size Your ClimberProper fit is important to your comfort and safety. Correct climber length is normally measured from the boot sole under the instep to a point 1/2" below the bone projection just below the knee joint. There are long sleeves available and they are generally preferred by people over 6’2". NOTE: Pull your pant cuffs up slightly just below the knee before fastening the leg strap... it provides greater mobility to climb.

how to Order ClimbersThe proper fit of a climber requires the leg iron, with pad attached, to extend from the instep to about ½” below the bot-tom of the inside projection of the knee joint.Climber adjustment varies based on style of climber and the sleeve length. Standard length sleeves 9204 are included unless long sleeves are requested by adding the suffix ‘L’ to the product number.

Standard sleeves permit leg length adjustment from 16 1/4" to 18 3/4" for standard width stirrup climbers [40cm to 48cm] using two fasteners, 14 1/2" to 17 1/4" [37cm to 42cm] with narrow stirrup style climbers.Long sleeves 9202 may be ordered at a slight extra cost. These permit length adjustment from 19 1/4" to 21 3/4" [48cm to 55cm] for standard width stirrup climbers, 17 1/4" to 20 1/4" [37cm to 51cm] with narrow stirrup climbers. Add suffix ‘L’ to the climber catalog number for long sleeves.

Tape Measuring

Strength & Reliability• Buckingham climber leg irons are manufactured from selected high

strength grades of steel and titanium. Gaffs are forged from a quality steel.• Before, during and after manufacturing Buckingham climbers from every

production lot undergo rigorous testing. They are subjected to physical abuse far beyond that encountered in normal use.

• Ductility Test: Leg irons are bent 180° around a two inch diameter man-drel. Gaff tips are bent 3/4" beyond normal position. Tested climbers are then examined by magnaflux to check for cracks.

• Gaff security is checked then reexamined for loose gaffs.• Hardness of steel in both leg irons and gaffs are rechecked through Rockwell readings.• Gaffs are magnaflux inspected to ensure there are no flaws in the forging.• Upon completion, every climber is reviewed to insure the gaff angle, position and the contour meets very tight tolerances.• Once the gaff has been final honed, it is inspected to make sure width, thickness, length, and radius meet the specified

requirements.• Random sample climbers are fatigue cycle tested to simulate a lineman climbing a pole.• The deformation test is to aid in the elimination of climber fatigue in the event a climber is used in an unusual manner

such as descending a pole with large steps.• Buckingham climbers are tested for persons with weight up to 350 lbs when fully equipped.

This is what happened to a climber with a stress riser. Someone chiseled their initial 'L' into the climber shank. It eventually broke in the spot the shank was initialed.

RULE OF ThUMB: BUCKINGhAM RECOMMENDS ThAT ALL REPLACEABLE GAFF CLIMBERS BE REPLACED WhEN ThE ORIGINAL GAFF AND ONE REPLACEMENT SET OF GAFFS hAvE BEEN WORN OUT FROM NORMAL USE.


proper Gaff sharpeninG proCedureA climber gaff improperly sharpened may be as dangerous as a gaff not sharpened at all. The gaff radius tip is critical for gaff penetration. A needle point gaff could result in breakage. Follow the instructions to be sure of proper maintenance and have a qualified person inspect your work.

1. Place climber in a clamp with blocks on each side to protect the climber.

2. File gaff from heel to tip in a smooth over and down motion. Hint - color in gaff with black marker to ensure you are taking material off evenly. Never file across or against the grain as it creates stress risers which may cause gaff to break. Never file the beehive of gaff.

3. Slot marked “Correct” on the gaff gauge should be your GUIDE to proper shaping of the gaff tip. 4. Never use a pole gaff shorter than 1 1/4" long.

Never use a tree gaff shorter than 2 1/4" long.

6. Check thickness of stirrup to ensure it is thick enough to support your weight.

5. Check gaff width and thickness at the 1/2" and 1" windows as illustrated in the instruc-tions included with the gaff gauge.


how to perform the pole Cut out test

(C) Making certain that the strap loop is held against the pole with pressure from the leg, gradually exert full pres-sure of the foot straight down on the stirrup without raising the other foot off the ground so as to maintain balance if the gaff does not hold.

(A) Place the climber on the leg, holding the sleeve with the hand, palm facing the pole. With the leg at about a 30° angle to the pole and the foot about 12 inches off the ground, lightly jab the gaff into the pole to a distance of approxi-mately 1/4".

(D) The point of the gaff shall cut into the wood and hold. The pole surface cut shall not be longer than 2 inches, measured from the point of gaff entry into the pole to the bottom of the cut on the pole surface.

(B) Keeping enough pressure on the stirrup to keep the gaff in the pole but not so much as to cause the gaff to penetrate any deeper, push the climb-er and the hand toward the pole by moving the knee until the strap loop of the sleeve is against the pole.

INSPECTION IS YOUR RESPONSIBILITY!RULE OF ThUMB - REPLACEABLE GAFF - CLIMBERS ShOULD BE ChANGED OUT ONLY ONCE IF

ORIGINAL SET WEARS OUT ThROUGh NORMAL USE.

how to perform the plane testThis test may be used to determine that the gaff is correctly shaped and sharpened to properly penetrate the pole. Place the climber on a flat, soft pine or cedar board as shown in Fig. 1 below. Holding it upright with the shank paral-lel to the board, but with no pressure on the stirrup, push the climber forward along the board. If the gaff is properly shaped and sharpened and if the gaff angle with the wood is sufficient, the gaff point will dig into the wood and begin to hold within a distance of approximately 1" (2.54cm). If the climber gaff slides along the wood without digging in, or merely eaves a mark or groove in the wood as shown in Fig. 2 the gaff is either not properly sharpened and shaped or the gaff angle is too small. The gaff angle is built into the climber by the manufacturer and should be between 11 and 17 degrees with the climber placed parallel to the surface of the wood.


Pin Style Steel Replaceable Gaffs

Buckingham Replacement GaffsThe Buckingham replaceable gaff climber came to being in WWI so the servicemen could climb both trees and poles, and if gaffs became damaged it was easier to carry spare gaffs rather than a whole set of climbers. We offer two styles of replaceable gaffs: we continue to supply the original with driv-lok pin attachment for those types of climbers still in the field and the screw style, available on our titanium and steel replaceable climbers.

how to Change Screw Style Gaffs on Buckingham Climbers

Figure 1

Figure 2

Figure 3

Figure 4

PATENTED

9206: pole gaffs as sup-plied on pole climbers 9209 (straight) and 9409 (offset).

9306: tree gaffs as sup-plied on tree climber 9309 (straight), and 9509 (offset).

9106: CCA (Copper Chromate Arsenic) pole gaff designed to penetrate hard CCA poles with ease. Sup-plied on steel 9109 (offset) and 9009 (straight).

NOTE: To order replacement screws order Model 11T (4/pkg.); To order replacement pins order Model 11 (4/pkg.)

Screw Style Replaceable Gaffs for Titanium and Steel Climbers

T9106A: 16 degree angled replaceable CCA pole gaffs designed to penetrate hard CCA poles with ease. To be used with all T, TB & SB climbers.

TB9306: tree gaffs as supplied on all titanium and steel tree climbers.

T9206A: 16 degree angled replaceable pole gaffs. To be used with all T, TB & SB climbers.

GAFF REMOvAL1. Secure the climber such that the heads of the hex head fasteners are facing you

(Buckingham Mfg. recommends using a vise with protective jaw covers or small wooden blocks to secure the climber).

2. With a 5/32” hex head wrench loosen and remove the two hex head screws. See fig. 1.

3. To remove the gaff from the climber place the gaff on a soft surface such as a block of wood and strike the ridge of the gaff 5/8” from the tip of the gaff. The gaff will come out of the slot. See fig. 2.

4. Ensure no damage is done to the climber or climber slot.

GAFF INSTALLATION1. The climber slot and gaff lug are both manufactured for a precision fit. The climb-

ers are then given a protective powder coat finish that may impede the insertion of gaff into climber slot. The finish may be removed from the boss hole and the gaff lug with fine emery cloth.

2. Press the front of the gaff lug into the climber leg iron slot. (A light coat of grease will ease insertion). It may be necessary to drive the gaff in by striking the back ridge of the gaff on a soft surface such as a block of wood. See Fig. 3

3. Insert the two black grade 8 screws and tighten using a 5/32” x 2 ¾” length Allen wrench. Hand tighten with maximum torque to achieve complete and maximum tightness. This method can yield Buckingham’s 136 inch pound tightening rec-ommendation for these fasteners. Note: use of a longer wrench can yield results exceeding the 136 inch pound recommendation and result in stripping of the screw head. Visually inspect to ensure screw heads are flush with the inside surface of the climber leg iron. See fig. 4.

4. Screw fasteners should be replaced after the first time removed. If re-using, apply a low to medium strength thread sealant (Loctite® or equivalent) to prevent screws from loosening. Screws may not be removable if a permanent type thread sealant is used.


how to Change Pin Style Gaffs on Buckingham Climbers GAFF REMOvAL1. Drive Lock Pins are always driven in from the right side of

the climber and must be driven out from the left side. 2. To determine the left side hold the climber parallel to the ground with the gaff on top and gaff tip pointing away from your body (see Fig. 1).

3. Secure the climber such that the left edge (as determined in step 2) is facing up. Buckingham Mfg. recommends using a vise with protective jaw covers or small wooden blocks to prevent the climber from being marred (Fig. 2).

4. Drive the installed pin part way out with one of the sup-plied extra pins or a straight sided punch (smaller than 1/8” diameter, but not less than 3/32”) so it may be grasped and removed with piers or a vise. ·If using an extra pin drive the smooth side of the pin through the pinhole. Do not drive the fluted portion of the pin into the pinhole (see Fig. 9). ·If using a punch drive the inserted pin through the pinhole and remove punch.

5a. If using pliers grasp the inserted pin and pull downward. Grasp the driven pin and pull upward (Fig. 3). (Rotating the pin while pulling may ease removal).

5b. If using a vise place the exposed portion of the installed pin in the vise and tighten. Place a small block of wood against the climber. While holding the climber strike the wood block with a hammer until the pin is removed (Fig. 4). Rotate the climber and re-move the other pin. Never directly strike the climber with a steel hammer.

6. To remove the gaff from the climber, strike the ridge of the gaff approximately ½” from the tip on a soft surface such as a block of wood (Fig. 5). Ensure no damage is done to the climber or climber slot.

7. Repeat the above procedure for your other climber.

PARTS LIST• May include any one pair of the following Gaffs: PN 9106 for climbing hard CCA poles, PN 9206 for climbing stan-

dard poles or PN 9306 for climbing trees. • 2 Drive Lock Pins for attaching gaffs (2 extra pins included)

Fig. 6 Fig. 7

Fig. 8

Fig. 9

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

GAFF INSTALLATION 1. The climber slot and gaff lug are both manufac-

tured for a precision fit. They are then given a protective powder coat finish that may impede the insertion of gaff into climber slot. This finish may be removed from the boss hole and the gaff lug with fine emery cloth.

2. Press the front of the gaff lug into the front of the climber slot (Fig. 6). (A light coat of grease will ease insertion).

3. It may be necessary to drive the gaff in by strik-ing the top ridge of the lug end of the gaff on a soft surface such as a block of wood (Fig. 7).

4. Ensure the pinholes of the gaff and the climber slot are properly aligned.

5. Lightly grease the smooth end of the Drive Lock Pin (Fig 9).6. Insert smooth end of the Drive Lock Pin into the pinhole on the right side of the

climber (See Gaff Removal step 2 to determine the right or left side of the climber).7. Using a hammer squarely strike the Drive Lock Pin so that it passes completely

through the lug of the gaff and into the climber pinhole on the left side (Fig. 8). The head of the pin should be flush with the right side of the climber.


Buckingham Manufacturing has been producing climbers in Binghamton, NY since 1896. The same craftsmanship that went into our climbers over a century ago is still in effect at Buckingham today. This vast experience combined with modern technology helps to keep Buckingham on the cutting edge of climber development.

Buckingham's latest climber development is the Titanium climber. Titanium is a strong, light metal. It is strong like steel, 45% lighter than steel and is twice as strong as aluminum.

All these characteristics of titanium give this climber it's strength, durability and lightweight character making Buckingham Titanium climbers safe, and comfortable as well as a providing an excellent return on investment due to durability.

The Buckingham Titanium is the strongest, lightest and most versatile • American Made climber on the market.The Buckingham Titanium allows for a non contoured, contoured and even • a twisted shank in a light weight climber. Current aluminum climbers in the marketplace do not have the versatility to offer these benefits.The Buckingham Titanium is much more durable than other lightweight • climbers. The suggested life of the Buckingham Titanium is the original set of gaffs and one replacement through normal use. Current aluminum climbers in the marketplace suggest replacement after 5 years. The Buckingham Titanium offers an optional patented “serrated” CCA gaff. • This gaff offers the best penetration available for CCA poles. This Gaff is available for all Buckingham climbers.The Buckingham Titanium with its lower gaff position and 16 degree gaff • angle offers 'extra forgiveness'. This is an excellent benefit especially for new apprentices.

*Available on all Buckingham pole climbers; add suffix T to the part #.

Twisted Shank*(T suffix)

e.g. TB94089AT

Offset Stirrup

Straight Stirrup

Contoured Shank (TB prefix)

e.g. TB94089A

Non ContouredShank (T prefix)

e.g. T94089AUse this chart when evaluating climbers on the facing page.


350lb.**Rated

Titanium Contoured Shank Replaceable Gaff Pole Climbers

Titanium Non Contoured Shank Replaceable Gaff Pole Climbers

GoldColoREd

ChRomEColoREd

*Indicates a complete set including leg irons, gaffs, foot & leg straps and climber pads.

OFFSET MODEL #

STRAIGHT MODEL #

CCA GAFF

LEATHER LEG STRAPS

LEATHER FOOT STRAPS

NYLON LEG STRAPS

NYLON FOOT STRAPS

CLIMBER PADS

TB9408A TB9208A 21341

TB9108A TB9008A X 21341

TB94089A TB92089A 21391

TB91089A TB90089A X 21391

TB9405A TB9205A 2234 21341 3122

TB9105A TB9005A X 2234 21341 3122

TB94059A TB92059A 2239 21391 3122

TB91059A TB90059A X 2239 21391 3122

*

*

*

*


OFFSET MODEL #

STRAIGHT MODEL #

CCA GAFF

LEATHER LEG STRAPS

LEATHER FOOT STRAPS

NYLON LEG STRAPS

NYLON FOOT STRAPS

CLIMBER PADS

T9408A T9208A 21341

T9108A T9008A X 21341

T94089A T92089A 21391

T91089A T90089A X 21391

T9405A T9205A 2234 21341 3122

T9105A T9005A X 2234 21341 3122

T94059A T92059A 2239 21391 3122

T91059A T90059A X 2239 21391 3122

*

*

*

*

Popular Choice

SilvERColoREd

Titanium Contoured Shank Permanent Gaff Pole Climbers

**Buckingham Climbers may be used by persons weighing 350 lbs. when fully outfitted with tools and equipment.


OFFSET MODEL #

STRAIGHT MODEL #

CCA GAFF

LEATHER LEG STRAPS

LEATHER FOOT STRAPS

NYLON LEG STRAPS

NYLON FOOT STRAPS

CLIMBER PADS

TB9847 TB9646 21341

TB91078 TB90078 X 21341

TB98479 TB96469 21391

TB91079 TB90079 X 21391

TB8747 TB8646 2234 21341 3122

TB8105 TB8005 X 2234 21341 3122

TB87479 TB86469 2239 21391 3122

TB81059 TB80059 X 2239 21391 3122

*

*

*

*


350lb.**rated


Steel Contoured Shank Replaceable Gaff Pole Climbers

Steel Contoured Shank Permanent Gaff Pole Climbers

BLUECOLORED

BLACKCOLORED


OFFSET MODEL #

STRAIGHT MODEL #

CCA GAFF

LEATHER LEG STRAPS

LEATHER FOOT STRAPS

NYLON LEG STRAPS

NYLON FOOT STRAPS

CLIMBER PADS

SB9408A SB9208A 21341

SB9108A SB9008A X 21341

SB94089A SB92089A 21391

SB91089A SB90089A X 21391

SB9405A SB9205A 2234 21341 3122

SB9105A SB9005A X 2234 21341 3122

SB94059A SB92059A 2239 21391 3122

SB91059A SB90059A X 2239 21391 3122

*

*

*

*


OFFSET MODEL #

STRAIGHT MODEL #

CCA GAFF

LEATHER LEG STRAPS

LEATHER FOOT STRAPS

NYLON LEG STRAPS

NYLON FOOT STRAPS

CLIMBER PADS

9847 - 21341

91078 90078 X 21341

98479 - 21391

91079 90079 X 21391

8747 - 2234 21341 3122

8105 8005 X 2234 21341 3122

87479 - 2239 21391 3122

81059 80059 X 2239 21391 3122

*

*

*

*

Popular Choice

Popular Choice



e.g. TB94089AT

Offset Stirrup

Straight Stirrup


e.g. TB94089A


e.g. T94089A

Climber accessories and replacement parts are found in the 'CLIMBER ACCESSORIES' section.


350lb.**rated

Titanium Contoured Shank Permanent Gaff Tree Climbers


Titanium Contoured Shank Replaceable Gaff Tree Climbers

SILvERCOLORED

SILvERCOLORED

OFFSET MODEL #

STRAIGHT MODEL #

CCA GAFF

LEATHER LEG STRAPS

LEATHER FOOT STRAPS

NYLON LEG STRAPS

NYLON FOOT STRAPS

CLIMBER PADS

TB9508 TB9308 21341

TB95089 TB93089 21391

TB9505 TB9305 2234 21341 3122

TB95059 TB93059 2239 21391 3122

*

*Popular Choice


OFFSET MODEL #

STRAIGHT MODEL #

CCA GAFF

LEATHER LEG STRAPS

LEATHER FOOT STRAPS

NYLON LEG STRAPS

NYLON FOOT STRAPS

CLIMBER PADS

- TB91428R 21341

- TB91429R 21391

- TB8142R 2234 21341 3122

- TB81429R 2239 21391 3122

*

*Popular Choice




e.g. TB94089AT

Offset Stirrup

Straight Stirrup


e.g. TB94089A


e.g. T94089A



350lb.**rated

Steel Contoured Shank Permanent Gaff Tree Climbers


**Buckingham Climbers may be used by persons weighing 350 lbs.when fully outfitted with tools and equipment.

Steel Contoured Shank Replaceable Gaff Tree Climbers

BLACK COLORED

BLACK COLORED OFFSET

MODEL #STRAIGHT MODEL #

CCA GAFF

LEATHER LEG STRAPS

LEATHER FOOT STRAPS

NYLON LEG STRAPS

NYLON FOOT STRAPS

CLIMBER PADS

SB9508 SB9308 21341

SB95089 SB93089 21391

SB9505 SB9305 2234 21341 3122

SB95059 SB93059 2239 21391 3122

*

*Popular Choice


STRAIGHT w/ RING

CCA GAFF

LEATHER LEG STRAPS

LEATHER FOOT STRAPS

NYLON LEG STRAPS

NYLON FOOT STRAPS

CLIMBER PADS

91428R 21341

91429R 21391

8142R 2234 21341 3122

81429R 2239 21391 3122

*

*Popular Choice



e.g. TB94089AT

Offset Stirrup

Straight Stirrup


e.g. TB94089A


e.g. T94089A


•3"and4"width;withorwithoutacinchloop •Thecinchloopdesignprovidesatightfit•Rollededgetopreventchafing •Maximumadjustability•3/4"ofpadding •Stitchedtunnelforasecurefit•Availablewithorwithoutmetalinserts•FitsBuckingham,Bashlin,StringerBrooks*andKleinClimbers.*TofitStringerBrooksclimberaddthesuffix'S'tothemodelnumber,e.g.3500CSwithcinchor3500Swithoutcinch.

Climber PadsClimberpadsareamajorfactorintheuser'scomfort.AtBuckinghamweoffermorestylesofpadoptionsthananymanufacturer.Dailyinspectionshouldbedonetoensureuser'ssafety.BenefitsInclude:

Inspect checkpoints for climber pads:

VelCro® Pads

The VelCro® CUshIon wraP Pads are easy To PUT on and more ComForTaBle Than ConVenTIonal ClImBer Pads.

•tornstitching•rippedortornleather•loose/damagedrivets•Velcro®thatdoesnotadhere

•damagedcinchloop•Velcro®wrapstominimumwraplabel(longerVelcro®strapsavailable)

without Cinch•ContinuousWrap•IdealforRodeos

with Cinch•PassStrapthroughthecinchloop•PullTight&SecureVelcro®Closure

model number of Velcro® Pads w/o the metal Insert

Wrap Width

3"

4"

Continuous Wrap

3503

3500

Cinch Loop

3503C

3500C

3202C Big Buck Velcro wrap Pad

BuckinghamwasthefirstmanufacturertointroducetheindustrytotherevolutionaryideaoftheVelcrowrappad.ThisinnovativecommitmenttoclimbercomforthasledtotheproductionoftheBigBuckVelcropad.TheBugBuckVelcropadisacombinationofyourtwofavoriteclimberpads.WehavetakentheadjustabilityoftheVelcrowrappad,theincreasedsurfaceareoftheBigBuckpadandaddedamoisturewickingDri-lexlining.Featuresalsoinclude:•Increasedsurfaceareatodistributepressure•Steel'C-Pad'insertforproperclimbershankposition•Cinchlooptoprovideanextratightfit•Rollededgetopreventchafing

new


VelCro® Cushion WraP Pads With metal insertsTheVelcro®Padwithametalinsertisofferedinastraightorangleddesignwithorwithoutthecinchdesign.Themetalinsertisdesignedtokeeptheclimbershankstationarytoreducechafingtotheleg.Buckinghamdoesnotrecommendusingangledinsertswithtwistedshankclimbers.

straightangled

3502•Angled

3504•Straight

VelCro Pads With a metal insert for buCkingham titanium/steel & bashlin aluminum/steel Climbers

TofitKleinclimbersaddthesuffix"KL"tothemodelnumber.Example:3502KLor3502CKL

TheVelcro®PadwithmetalinsertsdoesnotfitStringerBrooksclimbers.

Type Continuous Wrap Cinch Loop

4" Angled 3502 3502C

4" Straight 3504 3504C


Climber Pads

Themostcomfortable'L'padonthemarket.Theclosedcellfoamfillerpreventstheclimbershankfromirritatingtheuser'sleg.Therollededgespreventschafingthecalfmuscle.Alittleheavierpadbutitprovidesmaximumcomfort.

• roundededges-nosharpcornerstochafeleg•closedcellfoamfiller• tunneldesigntoholdshank• requiresa26"strap

35032 Angledwithmetalinsert

The3127providesincreasedsupportandhelpstoreducelegirritation.The8"widepadsecurestheclimbertothelegwithdualstrapsandthethickfeltfillerpreventsirrita-tionfromtheclimbershankrubbingthecalfmuscle.

• requirestwo26"straps• feltlined• tunneldesigntokeepclimbershankrigid•heavyleatherconstruction•dualstrapdesignprovidessuperiorsup-port

The'C'padisdesignedwithametalinsertandoversizedfeltlinerforadditionalcomfort.Thelineredgeminimizeschafingonthelegandthemetalinsertpreventstheclimbershankfromshiftingonthecalf,reducingirritation.

• requiresa26"strap• feltlined•heavyleatherconstruction

3126

35034 Straightw/metalinsert

3127

improved

For the straight insert order 35034. For the angled insert order 35032. To fit the Klein sleeve order 35032Kl or 35034Kl.To order replacement steel inserts order model 5032 for angled and 5032s for straight.For Klein order 5032Kl for angled and 5032sKl for straight.


The3119Under-pad-AVelcroPaddedLegprotectorthatmountsdirectlytothelegandunderneathastandardclimberpad.Providesanadditional1/4"ofpaddingtoprotectthecalffrombe-ingrubbedbytheclimbershank.Idealforappren-ticetraining.AnelasticstrapwithVelcro®closuremakesiteasytogetonandoff.Itisrecommendedthatusersaddanadditional2"oflengthtothetopstrapforacomfortablefitandadjust-ment.ONESIZEFITSALL.10"Hx81/2"W

Climber Pads

3201The'I'padcushionsonlytheclimber'sshankwithaminimumofadditionalweight.Allleatherconstructionwith3/4"padding.

3120Rivet-lesspadwiththebuiltintunneldesign.Asoftleatherisusedagainsttheleg.Allleathercon-structionwith3/4"padding.

3122Aqualityleatherpadwith3loopsandatunneldesigntokeepclimberstationary.Allleatherconstructionwith3/4"padding.

3125The'L'Tunnelpadhasasoft3/4"cushionsandwichedbetweentwopiecesofleather.Allleatherconstructionwith3/4"padding.3loopsandatunneldesigntokeepclimberstationary.

3124The'T'padhasathickfeltlinerandatunneldesigntostabilizetheclimbershank.Allleatherconstructionwith3/4"padding.

The new 3118 Big Buck Climber Pad

3118The3118BigBuckclimberpadutilizesadoublestrapsystem,thatfits1"and11/4"straps,tosecurethepadtothecalfresultinginsuperiorsupportoftheleg.requires 2 pair of leg straps and comes with a pair of 2639 straps.

Anangledmetalinsertpreventstheclimbershankfromshiftingonthecalfandthethickfeltpaddingaddstotheoverallcomfortmak-ingthisclimberpadafavoriteamonglinemenandarborists.9"Hx121/2"W

3119


Climber aCCessoriesComfortandsafetyarefeaturesBuckinghamstrivestoprovideourcustomers.

osha requires gaff guards when climber is not in use.

35033Theclimberfootplateattacheseasilytoanysteelortitaniumclimber.Twoplatecon-structionfastenedtogetherwithtwoscrews.Simplyscrewthetwoplatestogetherwiththerubbersoledown.Standingonthepolewasneversocomfortable.Instructionspackedwithfootplate.Toorderreplacementscrewsusepart#14.not for use with aluminum climbers.

3128shank pad-Iftheclimbershankirritatesyourankletrythebenefitofapaddesignedtocushionthistenderarea.Acushionbe-tweentheclimberandyouranklepreventstheirritation.

10The Climber shield-Alightweightshieldthatisidealforapprentices.Helpspreventgaffpuncturewoundswhenlearningtoclimb.Shieldattacheseasilywithonescrewtotheclimbershank.Slotinshieldallowsforclimberfootstrap.

6909-OnlyforBuck-inghampermanentgaffclimbers.

6909U-Acoatedwireuniversalpolegaffguardthatfitsallpoleclimbers:Buckingham,Bashlin,KleinandStringerBrooks.

6909a Snap on Gaff Guard fits all Buckingham replaceable gaffs with a 16° angle (A style).

60091 -LeatherGaffGuardwithVelcroFasteners60091-Tree60092-PoleFitsallclimbers.

6009 -LeatherGaffGuardwithabucklefastener.Fitsallclimbers.

60093 -LeatherGaffGuardwithBungeestrapthatattachestothesleeveloop.Fitsallclimbers.

60094-LeatherGaffGuardworkswithallmanufactur-ersreplaceableorperma-nentpolegaffclimbers.

Velcroclosuresandreinforcedsteelrivetstopreventgafftipfromprotruding.

new


Inspectfor:•cuts,nicksorcracks•elongatedholes•rottedleather•faultybuckle

Climber straPsClimberstrapsshouldbeinspecteddaily.

desCriPtions

Twopiecestrapispermanentlyattachedtostirrupring.

Onepiecestrapweavesthroughthestirruploop.

Two Piece Foot straps with split rings (sold in pairs) 1"(25mm) 11/4"(32mm) 1"(25mm) 11/4"(32mm) LATIGO LATIGO NYLON NYLON LEATHER LEATHER

26"(66cm)assembled 21391 213591 21341 2135126"(66cm)unassembled 2139 21359 2134 2135

single Piece straps (sold in pairs) 1"(25mm) 11/4"(32mm) 1"(25mm) 11/4"(32mm) LATIGO LATIGO NYLON NYLON LEATHER LEATHER

OnePiece22"(56cm) 2239 22359 2234 2235OnePiece24"(61cm) 2439 24399 2434 2445OnePiece24"(61cm)withBucklePad 2449 24359 2444 2435OnePiece26"(66cm) 2639 26399 2634 2635OnePiece26"(66cm)withBucklePad 2649 26359 2644 2645OnePiece28"(71cm) 2839 28399 28344 28354OnePiece28"(71cm)withBucklePad 2849 28359 2844 28454OnePiece30"(76cm) - 30399 263432 -OnePiece30"(76cm)withBucklePad 3049 26309 - -


misCellaneous Climber aCCessories

sleeve Fasteners-Therearetworeplacementsleevefasteners;oneusesa10/32threadedsem,productnumber996andthesecondusesabarrelfastenerandscrew,productnumber9215.Examinetheholeinyourclimberstoseeiftheyarethreadedorsmooth.Usemodel996ifthreadedand,ifsmooth,useproductnumber9215.

9204-Chromecoloredshortsleevesadjustfrom161/4"to183/4"forstandardlengthclimbers.Narrowstirrupclimbersadjustfrom141/2"to171/4".

9202 -Chromecoloredlongsleevesadjustfrom191/4"to213/4"forstandardlengthclimbers.Narrowstirrupclimbersadjustfrom171/4"to201/4".

sleeve Fasteners

996

sleeves9204 9202

Multi-GaffGaugeHolderforthecrewforemanorsafe-tydirectorwhohastocheckmorethanonemanufac-turers'climbers.Ordergaugesseparately.

6027 holder

Completeillustratedinstructionsareprovidedinaprotectivecovering.

Theyshoweachstepintheshapingoperation.Eachtoolmaybepurchasedseparately.

6025 Pole Gaff maintenance Kit6025C CCa Pole Gaff maintenance Kit

Correctlyshapedgaffsareessentialforclimbing.TheBuckinghamgaugeisyourguidetopropershaping.Itiscompact,uncomplicated,revealingandindispensable.Yourgaugeshouldbeabusytool.Itdefinesyourwork,checksyourprogressandjudgesyourresults.

In30secondstimethegaugewillsurveytheconditionofyourclimbersandindicatewhatiswrong,whereitiswrong,andwhatneedstobedone.

6303 Pole Gaff shaping Gauge6303C CCa Pole Gaff shaping Gauge6306 Tree Gaff shaping Gauge

Gaff Gauges with InstructionsGaff maintenance Kit

Kit includes:6058smooth,singlecutfile6303polegaffgauge(6303CforCCAGaff)6501finishinghone

9215split ring9218Splitringsaresoldinpairs.


Types of Body BelTsAll Buckingham body belts meet applicable OSHA standards, 1910.268 and 1926.959, the ASTM F887 standard plus all consensus and governing standards. Every Buckingham body belt is designed to provide the user with maximum comfort, safety and the necessary belt accessories. Body belts are designed for work positioning and not intended for fall arrest.

All body belts come with pouch tabs, a tape thong, knife snap, sleeve bag ring, gut strap rings, and tool loops. Plus all neoprene impregnated waist straps have 9 holes punched in the waist strap to accommodate for adjust-ment of heavy clothing in the winter.

Buckingham body belts are tested to 350 lbs. A person who’s weight and tools do not exceed 350 lbs. can work safely. There is a surcharge for persons requiring a body belt larger than size 30 or smaller than size 18. Special sized body belts may not be returned.

X - Distance from waist to top of hip bone to where body belt is worn.Y - Measurement is from front of hip bone around the back to the front of the other hip bone.Measure - ("Y" distance) is hip to hip and add 2 inches to padded belts and 4" for lightweight dri-lex belts. This measurement is the Dee size.Rule of Thumb - Measure from seam of pant, around buttocks to other seam and add 2 inches to padded belts and 4 inches to lightweight dri-lex belts.

The 6087 sizing belt ensures accurate dee measurement. This belt is designed to provide the user with an exact hip to hip measurement. For proper belt size add 2 inches to padded belts and 4 inches to lightweight dri-lex belts.

6087

The full float body belt allows the dee rings to shift ap-proximately 4" and the waist strap is stationary.

Full Float Semi Float

On Semi-float body belts the dee rings are station-ary and the waist strap shifts within the back pad.

How To Size A Body BeltThe most critical measurement of a body belt, in terms of comfort, is the dee measurement. The proper dee size is normally found by measuring from the prominent part of one hip bone around the back to the same point on the other hip bone. Add 2" (50mm) and 4" (102mm) for light weight Dri-lex® belts for padded belts so that the dee ring heels are just forward of the hip bones not on them. All measuring should be done over clothing to be worn under the belt. Normal combinations of dee and belt measurements are shown on the next page.


Inspect Your Body Belt Prior To Every Use For:•cracks,nicks,distortion,orcorrosionofhardware• loosestitching,brokenthreadsorburns• looseorwornrivets• loosegrommetsorelongatedholesonwaiststrap•wornmaterial•brokenaccessorysnaporring• toolloopsworntoallowtoolstofallfree•pockettabsthatwon’tsupportpouchesandtools

Immediately remove the belt from service if any of these conditions exist.Never:•modifyorpunchaholeinasupportcomponentofthebodybelt.•useabodybeltmadeofallleather.•disconnectwaiststrapandrelyongutstraporsuspenders(suspenders&gut

straps are rated to maximum of 25 lbs.).•useanaccessoryring,snaporsuspenderringsforworkpositioning.

An extra hole was punched to fit a larger user.

Buckingham Strongly Recommends the Use of Locking Snap Hooks!

Bo

dY

BE

LT S

IzIN

gB

od

Y B

ELT

INF

oR

MA

TIo

N

FoR A LEFT HANdEd BELT Add A '0' SUFFIX To BELT SIzE; E.g. 2000M-220

Belt Strap* Belt Strap Belt Strap No. of Tool dee Size Min Center Hole Max Loops

In. cm. In. cm. In. cm. In. cm.D18 46 32 81 36 91 40 102 3D19 48 33 84 37 94 41 104 3D20 51 34 86 38 97 42 107 3D21 53 36 91 40 102 44 112 4D22 56 37 94 41 104 45 114 4D23 58 38 97 42 107 46 117 4D24 61 40 102 44 112 48 122 4D25 64 41 104 45 114 49 125 4D26 66 42 107 46 117 50 127 4D27 69 44 112 48 122 52 132 4D28 71 45 114 49 125 53 135 4D29 74 46 117 50 127 54 137 4D30 76 47 119 51 130 55 140 4

*Belt Strap is Not Waist Size.

do Not Use Improperly Configured dee Rings when using a positioning strap with non-lock-

ing snap hooks

Double Bar Dee Ring straight sides

Properly shaped 'S' bend

Single Bar Dee Ring straight sides

Use Properly Shaped dee Rings When Using Non-locking Snap Hooks

Excessive 'S' bend

Exterior Circle Shaped Dee Ring

'D' Dee Ring


BUCKINGHAM 4 dee Body BelTspatent pending

Buckingham Manufacturing offers a new series of 4 dee full float body belts with all the same quality features as our 2 dee belts including a 5 1/2" foam cushioned pad reinforced with rawhide lace, bridge pieces and belt straps crafted of leather with a nylon center to provide strength and longer life, full float-ing dees that provide 4" lateral movement to reduce the wear on the pole strap, pouch tabs, a tape thong, knife snap, sleeve bag ring, gut strap rings and tool loops. These belts are ideal for use when a secondary lanyard is used to climb over obstacles.

With the wide acceptance of Wood Pole Fall Restriction and subsequent implementation, we quickly discovered the addition of a secondary lanyard created congestion in the dee rings of a 2 dee belt. Hence, the develop-ment of Buckingham's patent pending four dee body belts - both in-line and stacked models.

• The in-line model has front dee rings that are primary• In the stacked dee ring belt the lower set of dee's are primary.

The secondary dee's on both models are used to stow and for use of the lanyard to climb over obstructions. Both style of 4 dee body belts are available in leather and Dri-Lex® and with backsavers.

Model 2014M - Like the 2012M and with 4 in line Dee rings for attaching a second strap when crossing an obstacle on the pole.Weight 6.35 lbs.

Model 2015M - Like the 2014M with an 8" back-saver to provide support and relieve lower back strain.Weight 6.5 lbs.

fUll floAT • 4 dee • IN-lINe • Body BelTsleather & lightweight dri-lex®

2014M 2015M

2000EM Model 2000EM - This is the finest belt available and is hand crafted of the highest quality leather. It features a full float body belt with a 5 1/2" foam cushioned pad reinforced with rawhide lace. The belt strap is leather with a nylon center to provide strength and longer life. The floating dees provide 4" lateral movement to reduce the wear on the pole strap. Burgundy - 2000M-BU shown. Also available in Black (BL) or Brown. Weight 7 lbs.


A new series of 2000M body belts offering all the same high quality features of the 2000M with the added benefit of stacked dee rings. Ideal for use when a secondary lanyard is used to climb over obstructions. Features include hand crafting of the highest quality leather, full float body belt with a 5 1/2" foam cushioned pad reinforced with rawhide lace, bridge pieces and belt straps crafted of leather with a nylon center to provide strength and longer life, and full floating dees that pro-vide 4" lateral movement to reduce the wear on the pole strap. Available in black (BL), burgundy (BU) and brown (BR).

• 2largefullfloatdoublebardee• 2smallupperdeerings• 9"BackPad• Waiststraponly;nouppergutstrap

Available in black (BL), burgundy (BU) and brown (BR).

2100M

Model 2018M- Same as the 2019M but with a removable MAN RATED gut strap. (Must be used with a Buckingham provided man rated gut strap.)

2107M

• 2largefullfloatdoublebardee• 2smallupperdeerings• 9"PaddedBackPad• Removeablenon-ratedgutstrap

Available in black (BL), burgundy (BU) and brown (BR).

Weight 7.8 lbs. Weight 9.2 lbs.

2103M

9" 9"

12"

9" 9"

2017M

2019M 2018M

9"

• Dri-lex®lined• 2largefullfloatdoublebardee• 2smalldeerings–back• 9"contoured&pliableBackPad• MANRATEDRemovablegutstrap• Weight6.5lbs.

• Dri-lex®lined• Stackeddeerings• 2largefullfloatdoublebardee• 2smallupperdeerings• Backsupport;nogutstrap• Weight6.35lbs.

• Weight 9 lbs.

fUll floAT • 4 dee • sTACKed • Body BelTs WITH BACKsAVeRleather & lightweight dri-lex®

• 2largefullfloatdouble bar dee• 2smalldeerings• 51/2"paddedBeltpadreinforced with rawhide laces • Nonpaddedbacksaver• RemovableMANRATEDgutstrap(mustbeusedwitha

Buckingham provided gut strap) Available in black (BL), burgundy (BU) and brown (BR).


Model 1988M - This full float body belt has a 5 1/2" wide pad and utilizes a leather lined 6-ply neoprene impreg-nated nylon waist strap. The pad has a soft cushion to provide the user maximum comfort. The laced belt offers a quality look and added longevity for the user. Weight 7 lbs.

Model 1962M - A full float body belt constructed of the highest quality leather with a 6-ply neoprene impregnated waist nylon. The pad has rounded corners on the front to eliminate sharp edges from irritating the user when bending or reaching. The pad is 5" wide. Weight 5 lbs.

Model 19655M - The economy model of traditional full float body belts. The padded leather liner has a soft cushion. The 1 3/4" waist strap is made of 6-ply neoprene impregnated nylon. The formed leather bridge pieces allows the dee rings to float smoothly and easily. The pad width is 5". Weight 5 lbs.

Model 29636M - A full float body belt with a leather apron that prevents the insertion of tools between the waist strap and the pad which helps to reduce the risk of falling tools. The pad is 5" wide and the liner is a soft leather with a thick cush-ion. Weight 6 lbs.

fUll floAT • 2 dee • Body BelTs Add suffix 'e' for 4 dee rings, applicable to all 2000 series (special order only).

Model 2012M - A light weight full float body belt with a 5 " Dri-lex® lined cushion pad designed to wick moisture away from the user. Superior comfort is provided by extra pad-ding in the back support. Weight 6 lbs.

Model 2013M - Like the 2012M with an 8" back-saver to provide support and relieve lower back strain.Weight 6.2 lbs.

Model 2000M - This is the finest belt available and is hand crafted of the highest quality leather. It features a full float body belt with a 5 1/2" foam cushioned pad reinforced with rawhide lace. The belt strap is leather with a nylon center to provide strength and longer life. The floating dees provide 4" lateral movement to reduce the wear on the pole strap. Black - 2000M-BL shown. Also available in Burgundy (BU) or Brown (BR). Weight 7 lbs.

5 1/2"CSA Approved(Add 'C' prefix to part number for CSA labeled belt.)

Weight 6 lbs.

Model 1993F - A lightweight full float body belt with an extra wide back support. The back pad is 8" of continuous firm cushion lined with durable brushed leather. The 1 3/4" waist strap is 6-ply neoprene impregnated nylon with 9 adjustment holes.

Model 1994FR - Designed to be functional, yet lightweight. Waist strap is constructed of 1 3/4" 6-ply neoprene nylon with 9 adjustment holes. 5" wide pad has rounded edges for added comfort and is covered with tuff duck nylon on the outside and brush leather against the user's back. Weight 6 lbs.


11 3/8"

CSA Approved(Add 'C' prefix to part num-ber for CSA labeled belt.)

11"

CSA Approved(Add 'C' prefix to part number for CSA labeled belt.)

For a padded backsaver add letter 'N' to the model number.20005MN

fUll floAT • 2 dee • Body BelTs • WITH BACKsAVeRAdd suffix 'e' for 4 dee rings, applicable to all 2000 series (special order only).

9"

Model 20005M - The backsaver attached to the padded 2000M body belt allows the user to adjust the back rest using two straps in the center of the back. The front of the backsaver is tightened using a single strap with a tongue buckle. Never rely on the backsaver for life support.

Weight 7 lbs.Brown - 20005M-BR shown Also available in:Black (BL) Burgundy (BU)

Weight 9 lbs.

Model 20003M - The body belt section of model 20003M is con-structed using the padded 2000M belt and has the added feature of a stitched on backsaver. The extra width provides support to the back helping to relieve lower back strain. The backsaver helps hold the belt and the dee rings in the perfect location. The backsaver is tightened by the single strap with a tongue buckle. The backsaver is not designed as a life support belt. Burgundy - 20003M-BU shown. Also available in Black (BL) or Brown. (BR).

Model 20002M - The 20002M backsaver provides all the advantages of the 2000M body belt, minus the belt padding, and with the added feature of the backsaver. The non padded back support is not stitched on and provides one continuous piece of leather from the belt liner to the top of the back support.

Weight 8 lbs.Black - 20002M-BL shown.

Also available in Brown (BR) or Burgundy (BU).

12 1/2"

CSA Approved(Add 'C' prefix to part number for CSA labeled belt.)

Model 20006M - The 20006M features a smooth non-padded backsaver constructed from a single piece of leather thereby eliminating a ridge line and minimizing chafe. The backsaver, attached to the 2000M body belt minus the belt padding, fits comfortably on those of you with a shorter torso. It allows the user to adjust the back rest using a strap in the center of the back. The front of the backsaver is tightened using a single strap with a tongue buckle. Never rely on the backsaver for life support.

Brown - 20006M-BR shown. Also available in Black (BL) or Burgundy (BU)

Model 20007M - includes the same features as the 20006M except features a padded belt.

Weight 7 lbs.


Model 1958 - The 1958 body belt has a 5" wide back pad made of the highest quality leather. The 1 3/4" waist strap is 6-ply neoprene impregnated nylon. The pad corners are rounded to prevent irritation when bending or reaching.

Model 1902 - The 1902 is an economy model of the typical linemen's belt using quality leathers with a 6-ply neoprene impregnated nylon 1 3/4" waist strap. The rounded edge and the 5" pad make this a favorite body belt among fixed dee ring, semi-float body belt users.

Model 1997T2 - The 1997T2 is a light weight semi-float body belt that can be attached to a harness utilizing quick connect plastic clips. This belt is ideal for someone climbing towers and needing back support and a place to hold tools.

Weight 5 lbs.

Weight 5 lbs.

Weight 4 lbs.

lAddeR BelTs

seMI floAT Body BelTs Semi Float Body Belts are made so the waist strap shifts within the back pad.

Typical Fit of a Ladder Belt for a Person with Waist Size:

24-28 X-Small

28-32 Small

32-36 Medium

36-40 Large

40-44 X-Large

Model 38523Q1

Made of 1 3/4" (44mm) woven nylon sewn to a man-made synthetic material wear. A 3" (76mm) wide soft woven pad is attached for added comfort. Features leather tool loops, pouch tabs, tape thong and grommet holes on the billet end of strap for adjustment. Also features 2 stationary work positioning dee rings.


Model 6109A wire hour glass shaped handline carrier that separates when approximately 14 - 18 lbs. of pressure is applied.

Model 341Leather adjust-able loop and strap to fit up to a 2" belt.

Model 6107Tape thongs connect to belt or holster by a rivet or barrel fastener.

600031" nylon strap with snap to girth hitch up to a 3" belt.

600021" Nylon

strap with 1 1/8" ring to

girth hitch up to a 3" belt.

Model 6104Lowell Wrench holder constructed of heavy leather and a steel bracket. Secure the wrench holder to the body belt pouch tab easily and quick-ly with the barrel fasteners provided. (Wrench is not included.)

130031Leather strap

with 1 1/8" ring to fit up to a 3" belt.

13003Leather strap with snap to fit up to a 3" belt.

Model 6102A durable wrench keeper designed

to attach to the body belt. The leather back is strong to hold heavy tools.

(Wrench is not included.)2 1/2" x 3 3/4"

Care & Maintenance

Model 2402

A nylon handline carrier that will straighten when approximately 14 - 18 lbs. pressure is applied to allow the handline to pull free.

Model 201 Cleaner & Model 202 ConditionerClean and recondition your leather products regularly to extend their life. Lexol cleaner removes dirt and grime and the conditioner restores essential oils to keep leather soft and supple.

Handline Carriers

Body BelT ACCessoRIes

Handline System

Model 2406Handline HookA reliable tool to raise and lower material at the work site. The welded eye and formed hook is rated to 500 lbs.

Model 2407-80 Handline System to raise and lower material at the work site. Includes the 500 lb. rated Buckingham handline hook, 750 lb. test rope snap, a 1000 lb. nylon block and 80' of 12 strand rope. The kit can also be purchased with

60', 100' and 120' rope lengths [2407-60, 2407-100 and 2407-120].

Custom rope lengths avail-able upon request.

HANdlINe sysTeM


Body BelT ACCessoRIes

Model 6256

Model 6259 Woven nylon with leather shoulder pads designed to disburse the weight of the belt and tools. Not intended to support belt by itself. Never detach the waist belt tongue buckle. Straight keeper snap used to attach suspender to the body belt (25 lbs. maximum support).

One size fits all.

gut StrapsModel 6257

How to Size a BacksaverFor proper fit take the dee size center hole measurement on Body Belt Sizing and subtract 2 i.e. dee size 23, center hole measurement is 42", subtract 2 and order a 6272-40.)

Suspenders

Model 62583-Leather Model 62593 - Nylon

A suspender that attaches to the belt using adjust-ment buckles that form a loop. Ideal if your body

belt does not have suspension dee rings.

One size fits all.

For an additional charge, leather gut straps may be ordered in black,

brown or burgundy to match your body belt.

For an additional charge, leather sus-penders & gut straps

may be ordered in black, brown or bur-gundy to match your

body belt.

oRdER INdUSTRIAL BELTS ANd PAdS BY WAIST SIzEFit is important to comfort. Be sure to allow for wear over heavy clothing.

Model 6258Leather suspenders with shoulder pads are used to support the weight of the belt and tools. The 6258 uses a snap hook with a flat keeper to prevent the snap from disengaging accidentally (25 lbs. maximum support). Suspenders are not intended to hold the belt without the assistance of the body belt waist strap being buckled.

One size fits all.

Model 6257

Model 6257 is a heavy 1 3/4" leather waist belt with 4 buckles and snaps designed to help support the tool belt and tools. Not to be used solely to support belt without assistance of body belt waist strap. Never detach the body belt waist strap tongue from the billet end of the waist while working aloft.

Order by Small, Medium, Large or X-Large.

Model 6256 is a 4 ply nylon 1 3/4" waist belt with a wide leather pad to help support belt and provide added comfort. Not to be used as a support belt.

Order by Small, Medium, Large or X-Large.

New

Model 62531Designed for comfort and functionality. Sponge lined pad relieves irritation when bending. Connecting straps and snaps slide on the waist strap for aligning to suspension dee rings on body belt. Each snap supports up to 25 ibs. Not man rated. Order S, M, L, or XL.

Typically Fit for A Size Person With Waist SizeSmall 28-32Medium 32-36Large 36-40X-Large 40-44

gut Strap with Back SupportAttaches to any body belt with four suspension dee rings. The dual take-up straps in the back with the wide back saver, and a front buckle assure a comfortable fit. Backsaver width 9".

Model 6272


491906 Pockets10" x 3 1/2"

42266S-BR5 Pockets2 Way Knife Snap 8" x 9 1/4"Standard back

Short back

Double back Holsters

49233 Pockets 11" x 6 1/4"

PoucHes & Holsters*Leather holsters are made of heavy tanned leather* and select models include a double back that stays rigid, even after years of use, to ensure easy tool removal from the pockets. The double back design features pockets that are riveted to a thick layer of leather with another leather layer sewn over the rivet heads. Sandwiched in the middle of the leather layers is a plastic stiffener to keep the back rigid. For left handed persons add suffix 'L' to reverse pockets.

* Holsters may be ordered, at an additional charge, to match body belt colors in black (BL suffix), brown (BR suffix), or burgundy (BU suffix).

To prevent your holster from hanging too low order the short back holster. If a short back holster is preferred, add suffix 'S' to the model number.

49261SShort back

2 Way Knife Snap 8" x 5"

492614 Pockets2 Way Knife Snap 11" x 6 1/4"

4926-BR4 Pockets 11" x 6 1/4"

4951-BL2 speed wrench slots

3 Pocket10" x 7"

422665 Pockets 10 3/4" x 8" 2 Way Knife Snap

Popular Choice

66Burr and Barrell Nut Fastener KitOne assembled unit per package

Unassembled

Assembled

5 Pockets 10 3/4" x 8" 2 Way Knife Snap4089 Knife Sheath Attached

42666-BL

New


Miscellaneous Holsters

single back Holsters*Buckingham holsters are constructed of the highest quality leather and built to last. Our craftsmen take pride in their work and years of experience has proven to be an asset to manufacturing the best.

4223

3 Pockets 10 1/4" x 6"

4051

1 Pocket 11 3/4" x 3 3/4"

4020

2 Pockets 11 1//2" x 4"

4226

4 Pockets 11” x 6 1/4”

5041Top View

4079

Knife Sheath 9 1/2" x 3"

40231-BR

3 Pockets 11 1/4" x 6 1/4"

3 Pockets 11 1/4" x 6 1/4"

4023 5041

4 Pockets / 5 Tool Loops 9 1/4" x 5 1/2"

4126 4659 4164 4650

* Holsters may be ordered, at an additional charge, to match body belt colors in black (BL suffix), brown (BR suffix), or burgundy (BU suffix).

4089

Knife Sheath 9 1/2" x 3"

5 Pockets, 8 1/2" x 8"9 Pocketsw/ Hammer Loop& Tape Thong 11" x 9 1/2"

8 Pockets, 10" x 7"5 Pockets, 10" x 8 1/4"


5 Pocket 10 1/2" x 4 5/8"

931 930

3 Pockets 10 1/2" x 4 5/8"

Miscellaneous Holsters anD PoucHes

945 LEA

945 LEA - Top

Tool Holster, 5 Pockets 4 Tool Loops, 8 1/2" x 6"

4013

1 Scissor Pocket6" x 2"

Side View

6283 Pockets 6 3/4" x 5 3/4"

Top View

4191

7 Pockets, 4 Tool Loops 8" x 6" x 2"

1 Tool Loop 11" x 3 3/4"

4074

Spray Can Holder1 Pocket, 8" x 4"

4076


leatHer nut & bolt bags

Extra heavy duty nut & bolt bag with a covered front pocket.10 1/4" x 10"

45785299

Models 5299 and the 52993 are available in brown - 'BR', black - 'BL', and burgundy - 'BU'. To specify color, add the designated abbreviation as a suffix to the model number.10 1/4" x 10"

52993BR

Like 5299 with 3 inside pock-ets to accommodate speed wrenches. Available in brown - 'BR', black - 'BL', and burgundy - 'BU'. To specify color, add the designated abbreviation as a suffix to the model number.10 1/4" x 10"

A heavy duty nut & bolt bag with side gussets to keep the bag open. Raw hide lace provided to connect to body belt.9" x 6 1/2"

5302

orDer inDustrial belts bY Waist siZe

Fit is important to comfort. Be sure toallow for wear over heavy clothing.

Typically Fit for A Size Person With Waist SizeSmall 28-32Medium 32-36Large 36-40X-Large 40-44

buckingHaM carrY belts

62872

1" wide, 50" long belt designed so user can cut off excess strap.

Electrician Belt1285 - Size (S, M, L or XL)

1 3/4" Wide• Accessorysnap• Toolloop• Tapethong

Telephone Installers Belt6286

1 1/4" Wide •Adjustableslidebuckle•T-buckleconnection•Telephonehanger

Carry All Belt - Double Tongue Buckle5279 - Size (S, M, L or XL)

2" Wide

Miscellaneous Tool Belt - Single Tongue6287 - Size (S, M, L or XL)

1 3/4" Wide

Popular Choice


notes


•Alwaysinspectpriortoeachusetoensurelockerworksproperly.•Whenattachingthepositioningstraptothebodybelt,alwayslooktoensureyouareattachedtothedeering.

•Neveruseapositioningstrapifredisexposed.•Neveruseanallleatherpositioningstrap.• Ifrepositioning,immediatelyrechecksnaphookengagement.•Neverhooksnaphooktosnaphookorbackontoitself.•Neverhookmultiplesnaphookstoasingledeering.•Neverattachanon-lockingsnaphooktoadeeringwithanexteriorcircleora'D'shapeddeering.

•Neverallowthepositioningstraptobecometwisted.

Positioning straPsPositioningstraps,commonlyreferredtoaspolestrapsorsafetystraps,areonepartofaworkpositioningsystemdesignedtoprovidetheusertheabilitytoworkandhavefreeuseofbothhands.Thepositioningstrapisnotintendedtobeusedasafallprotectiondeviceunlesstheusersecurestheirstrapaboveacrossarm,latticetower,etc.limitingthefalldistancetolessthantwo(2)feet.Buckinghamprovidesthewidestchoiceofposition-ingstrapstylesandoptions.

Therearethreebasictypesofmaterialusedtomanufactureapolestrap:6-plyneopreneimpregnatednylon,leatherwithanyloncenterandwovennylon.Thecharacteristicsofeachtypeofmaterialare:

Locking snaP Hooks Differ in functionaLityBuckingham always recommends using a locking snap hookandofferstwolockingsnaphookstoaccommodatetheuser.Thesnaphooksonthepositioningstrapusedtoconnecttoyourworkpositioningbodybeltdeeringsareacriticalpartofthestrap.Theusermustbecomfortablewiththeabilitytousethesnaphookeasily.

Aneasy-to-usesnaphookdesignedtooperatelikeanon-locker.Thehingepointlocationmakestheuseroperatethe99Elockingsnaphookastheydidtheirnon-lockingsnaphook.Thelockmechanismsareinternalthereforelesslikelytomalfunction.Thissnapoffersthewidestopeningtoeaseattachmentanddetachmentwiththeglovehand.

Thehingepointsmakethislockereasytohandle.Thislockeriseasytooperatewithaglovedhand.Thebump&locksystemwillnoteasilymalfunction.

6-plyneopreneimpregnatedisthemostwidelyusedamongutilitylinepersonnel.Excellentabrasionresistance,contrastingcentercolortoalertusertoreplace,stiffmate-rialtostart&slidesonpoleeasily.

Leather/nyloncombination-abrasiongood,hasanyloncentertoserveasthewearindicator.Adherestopolewell(lessslide),andgenerallystiffuntilusedforashortperiodoftime.

Wovennylon-abrasionresistancegood,centerlayerhascontrastingredcolortoalertuserofwear,adherestopolewell(lessslide)andwelllikedontowers,veryflexiblefromdayone.

99E

77

It could result in a serious injury or death.

Exterior Circle Shaped Dee Ring

'D' ShapedDee Ring

NEVER DEFEAT THE LOCK MECHANISM ON ANY LOCKING SNAP HOOK


Neoprene Impregnated Nylon with Tongue Buckle

Positioning straPs

386099EPopular Choice

Neoprene Impregnated Nylon with Slide Buckle

Length 99E 77 Lockers Lockers

5'8" 344299E 344277

6' 346099E 346077

6'6" 346699E 346677

7' 347099E 347077

8' 348099E 348077

346099E

Whentheexistingpositioningstrapisnotlongenoughanextensionstrapprovidestheextralengthneeded.Simplyconnectthesnaptothedeeringandthesnaptothebodybelt.

38189E - is 18" long

Extension StrapEasy to adjust the length of the strap!

Woven Nylon with Friction BuckleThewovennylonpositioningstrapusesafrictionbuckleinconjunctionwithacarabiner.


5'8" 494299E 494277

6' 496099E 496077

6'6" 496699E 496677

7' 497099E 497077

8' 498099E 498077

494299E

Woven Nylon with Friction BuckleAdjustseasilywithafrictionbuckle.Idealfortransmission

towers,substationsorladders.


6' 48129Y-6 48127Y-6

6'6" 48129Y-66 48127Y-66

7' 48129Y-7 48127Y-7

8' 48129Y-8 48127Y-8

48129Y-6

Leather with Woven Nylon Center and Tongue BuckleAfavoriteamonglinemenandavailableinblack(BL),burgundy(BU)andbrown(BR).


5'8" 364299E 364277

6' 366099E 366077

6'6" 366699E 366677

7' 367099E 367077

366099E


5'8" 384299E 384277

6' 386099E 386077

6'6" 386699E 386677

7' 387099E 387077

8' 388099E 388077


BuckSqueeze Wood Pole Fall Protection SyStemIn production since 2000, the BuckSqueeze Wood Pole Fall Restriction Device is made to fall protect line personnel from ground to ground. To operate, the BuckSqueeze user hitchhikes up and down the pole and if the user starts to fall, the strap squeezes the pole, preventing a fall. The new improved BuckSqueeze with the three slot dee ring provides a slot that accepts the carabiner making the connection rigid thereby easier to hitch-hike up and down the pole. While climbing over obstructions, the user shall secure a secondary lanyard or a second positioning strap prior to removing the BuckSqueeze.

The BuckSqueeze is easy to adjust to accommodate the size of the pole and it's BuckTooth (Model 485) or BuckWheel (model 487) accessory shall be added when climbing an iced or slippery poles.

Model 483D For distribution poles with a circumference from 16" (5" diameter) to 50" (16" diameter)Model 484T For transmission poles up to a 90" circumference (28.7" diameter)

483D Patented•3slotdeeincreases

rigidity of the strap while hitchhiking.

BuckSqueeze enHancementS

•Newcarabinerwithserra-tions for improved gripping of the pole.

•Newpaddlehandlehasachannel allowing the webbing to glide freely keeping the strap evenly spaced while ascending or desecending.

• Incorporationofathreadedremoveable cleat into the CAM buckle housing improves the ar-resting capability in the event of a cut out.

•Removalofthelinkbetween the friction buckle and snap adds to ease in the adjustment to and from the pole.

•Frictionbucklemodificationtomaketheopeningslightly larger resulting in easier strap adjustment.

FeatureS & BeneFitS:• ONCEYOU’REONTHEPOLE,YOU’RECONTINUOUSLYWOODPOLEFALLPROTECTED

• FRICTION&CAMBUCKLEADJUSTMENTSATUSER'SSIDESMAKESITEASYTOADJUSTFORTHECIRCUMFERENCEOFTHEPOLE

• MOSTWIDELYUSEDWOODPOLEFALLRESTRICTIONDEVICEINTHEUSA

• DOESNOTWORKITSELFOUTOFADJUSTMENT

• ONEDISCONNECTTOCLIMBOVERANOBSTRUCTION

• OUTSTANDINGFACTORYSUPPORT-FOLLOWUPTRAININGAFTERTHESALE

• NOTONGUEBUCKLETOADJUSTATTHEBACKOFTHEPOLE!

• ONEMODEL,WITHACCESSORIES,CANBEUSEDDURINGALLSEASONS:WETORICEDPOLESWITHORWITHOUTCONDUIT

3 Slot Dee

Serrated Roto-Snap

Linkless Snap

Channel Handle

Cleat


38N99E

38A

Practice PoLe toP rescuePoletoprescuerequirespracticetobeproficientinareallifesituation.Productnumber38N99Eofferstheabilitytopracticewithouttheexpenseofusingawholepolestrap.Duringpracticetheonlypartthatiscutisthe12"6-plyneoprenepiecethatcanbeused3timesandislesscostlythancuttingapolestrap.Itsimulateshowdifficultitistocutthepolestrapinarealemergency.Theothercomponentsofthesystemmaybereused.

483M

Pole Top Rescue with Conventional Positioning Strap

Pole Top Rescue with the BuckSqueeze

•38A:Two12"six-plyneoprenestripswith4punchedholes.

•38A-150:150'ofsix-plyneoprenewithbuckleholesspacedeverythreeinches.

•38N99E:Wholesystem-snap&buckle(2),backstrapw/bucklesandtwo12"pieces.

•483M BuckSqueeze Rescue Trainer:ModifiedBuckSqueezeunitforhurtmanrescuetraining.OfferstheabilitytotrainwithouttheexpenseofdestroyingaBuckSqueezeunit.Duringpracticetheonlypartthatiscutisthe12"orangenylonwebbing.Withreplacementofthe12"strip,theunitcanbereused.

•483A:Two12"nylonstripswithholes.

•483A-50:50'ofwebbingwithpunchedholes.

4812Y-8

For dee size, add 4” to the seam to seam measurement.

485

BuckTooth used for climbing icy poles.

BuckAdjuster Model 9-8(9 designates model # and 8 is the length in feet)• Maybeusedasaprimaryworkpositioningdevice.• Stitched1/2"ropelanyardwith1706SnapHook.• Greenandwhitejacketwithred core.• FeaturesthenewBuckGrab5004BLAD(LengthAdjustingDevice)

487

BuckWheel Usedforicyorslipperypoles.Angledwheelallowscuttingedgetopenetratethroughiceandintothepoletoarrestafall.TheBuckWheelrollsonthepoleforeasylateralmovement.Easytoattach.

Lightweight Body Belt2015MWith4dee’s:facilitatescrossingobstructionsusingtheBuckSqueeze&yourchoiceoflanyard.

Bucksqueeze accessories

Adjustable Web Lanyard

BuckGrab Model 5004BTwistedCAMtolay

betterinworkposition.


notes


7058J

Consists of:7058 Pouch 7088 Knife 7075 Scissors2" x 7 1/2"

7059

Tools not included. Designed to hold scissors, knife and can wrench.

• Tempered• 1 7/8" cut• Plated forged steel• Notched & serrated blades

7075

• Stainless steel • 1 7/8" cut• Less fatigue • Ice tempered• Notched & serrated blades

7086 - 9" length with Yellow Handle7080 - 9 1/2" length with Wooden Handle

7058CK

Consists of:7058 Pouch 7088 Knife

7085 Scissors2" x 7 1/2"

Buckingham Skinning kniveS & SciSSorS*(*More pouches available - See Pouches & Holsters Section)

Buckingham knives are well accepted for their durable blades. The blade stays sharp, and when sharpening is needed, the honing stone can put a sharp edge on it in no time.

Popular Choice

7089 - 9 5/8" length with Red Handle 7088 - 6" length with Comfortable Rubber Grip

High quality Steel Blade

7090 - 9 7/8" length with Ergonomic Handle

4089 Knife Sheath

Wood Handle

1 1/4" Dia. Yellow Handle

1 1/8" Dia. Red Handle

Ergonomic Handle

Accessory Ring 7080 7086 7089 7090

Without Accessory Ring 70801 70861 70891 70901

Blunt Point 70802 70862 70892 70902

Notched Blade 70803 70863 70893 70903

Notched & Blunt Point 70804 70864 70894 70904

7085


7095 Buckskinner

70951 Buckskinner Guard

BuckSkinnerErgonomically designed dual handle skinning knife constructed to quickly, easily & safely strip wire.

(To order the Buckskinner with an accessory ring order 7095R.)

Popular Choice

The BuckSkinner advanTageS4051 Buckskinner Holster

• Ergonomically designed grips and a convex edge cuts the jacket not the conductor

• Finger guards prevents user lacerations

• Ablility to strip outer jackets on overhead or underground cables up to 2 inches in diameter

• User can flip over to use with one hand, just like your regular hook knife, to do end connections. Use your other hand for holding the conductor

• Sharpens like any other edge

• Ideal for stripping cable in any position

• Less fatigue

Buckskinner used off the pole

The Three p'S for STripping caBle

Buckskinner used underground

• Penetrate the blade into the insulation jacket at approximately thirty degrees

• Place thumbs under the cable, applying pressure against the bottom of the cable as the knife cuts the jacket

• Pull with straightened arms once the sharpened edge is on the conductor, leaning back and easing the knife toward you to strip the insulation jacket

Penetrate Place Pull


reel lifTSA one man reel lift for on-the-job raising of cable reels for free reeling. Turns on axle through the center. No jamming due to damaged reel rims. Use in yards, on trucks & in the warehouse. Simple set up with 5 parts.265 1267

ground rod driver6160 Ground Rod Driver with no moving parts. Rugged manual unit designed for one man to sink ground rods using the weight of the tool as the driving force. The permanently attached weight avoids finger crushing hazards. The dual-ended unit permits efficient use to start driving with "long" end, finish with "short" end. Fits over 5/8" ground rod. Overall length 6 feet (180 cm), weight 36 lbs. (16 kg). Inside diameter fits 5/8" rod.

6142 This forged and heat treated hook, bent at just the right angle for easy lifting of vault and manhole covers, is 26" (66 cm) long, weight 2 lbs, 4 oz. (1 kg).

manhole cover hook

STrand & Wire diSpenSer6150 A new design with strength where it is needed. Raise the pivoted swing-away arm, drop in the coil of strand, lower the arm and you are ready to cut the bands and feed strand. No loose parts to drop and lose, no unneeded metal bands with this sturdy tool. Handles full coils with ease while storing partially used ones safely. A time and labor saver.

Two sizes:265 for reels to 44" diameter, 40" width, weight 55 lbs.1267 for reels to 48" diameter, 40" width, weight 65 lbs.Capacity for each 2500 lbs.

Arm swings to drop in guide wire Arm locks with wing nut

Two Sizes6150

6"D x 30"W; 10 lbs.

615018"D x 36"W; 12 lbs.

goaT Wrench7071 Made from alloy steel to withstand hard usage. The jaws are designed so that a nut, bolt or pipe is drawn further into the throat as pressure is applied. Weighs 2 lbs.

Model 4559

Model 4558

Model 4559Ribbed 10" x 8" x 6" (25 x 20 x 15cm)Weight 8.5 lbs (4 kg)

Model 4558Smooth 10" x 8" x 5.5" (25 x 20 x 14cm)Weight 7 lbs. (3 kg)

Wheel chockSBuckingham wheel chocks grip the surface and the tire for a positive lock. The interior of wheel chocks (models 4558 and 4559) have a void in the center to allow easy handling. Solid rubber chocks are available upon request.


STaple STickThe Staple Stick allows for added dexterity and accuracy, especially when wearing rubber gloves. It also prevents the user from dropping staples or having them fly into the road or the user’s face. Approximately two loaded staple sticks service a standard distribution pole. The overall dimensions = 7/8" x 3/4" x 14 1/4" & the diameter of hole to hang stick = 1/2".

STaple puller

Hold the stick with staple over the ground wire, hammer top of staple to get started, pull staple stick away and set staple.

6400 - Cushioned Handle

Easy removal of staples installed over ground wire moulding. Welded bridge straddles the molding so removal is accom-plished without damage.

574L• Holds 10 staples• Slots 1/8" W x 1" L

574• Holds 12 staples• Slots 1/8" W x 3/4" L

Hang the Staple Stick on the belt while climbing.

Thread reSTorerSNo Need for Elaborate Dies

Chase & Renew Battered & Rusted Threads

Just one tool, with the standard set of die blades, handles SAE, USS, NPT or Metric type threads in any pitch from 6 to 28 threads per inch - right or left hand threads - in any outside diameter from 1/4" up to and including 12" diameters, depending on the specific model.

Model 6103 - Has an out-side diameter capacity of 1/4" to 1". Weighs 1 lb.

Model 6203 - Has outside diameter capacity of 1/4" to 1". Has maximum handle swing of 3" for work in closely confined places. For such applications as cylin-der head studs, 'U' bolts, wheel lugs, etc. Weighs 1 1/4 lbs.

Model 62070 - Outside di-ameter capacity of 4" to 6". Has plain guide die blade which allows dies to pass over keyways and milled flats on threaded parts. Weighs 4 1/2 lbs.

Model 61060 - Outside di-ameter capacity of 1 3/4" to 4". Same general design as Model 62070. Weighs 3 1/4 lbs.

Model 62040 - Outside diameter capacity of 1" to 2 9/16". Same general design as Model 62070. Weighs 2 3/4 lbs.

Model 6212 - Outside di-ameter capacity of 6" to 12". Weighs 10 lbs.


noTeS


Model 6223C BeltingModel 6223 LeatherDual saw scabbard. Large pocket is de-signed for curved blade pruning saws with up to a 24" blade. Small pocket fits curved blade pruning saws with up to a 16" blade.Large Pocket26" (66cm) overall length21" (53cm) pocket depthSmall Pocket17" (43cm) overall length16" (41cm) pocket depth

Model 60212C BeltingModel 60212 LeatherChainsaw saw scabbard. Pre-vents damage to chain and other equipment. For use

with bar lengths from 12" to 14". 12 3/4" (32cm) overall length; 12" (30cm) pocket depth.

Model 6022C BeltingModel 6022 LeatherChainsaw saw scabbard. Use with bar lengths from 16" to 20". 18 1/4" (46cm) overall length; 17" (45cm) pocket depth.

Model 60156C BeltingPole saw scabbard fits Fanno blade F1-17S.

16" (41cm) overall length16" (41cm) pocket depth4" (10 cm) wide

Model 65156C BeltingPole saw scabbard fits Fanno blades #16 and #17 as well as Mundo pruning saws.

16" (41cm) overall length16" (41cm) pocket depth4" (10 cm) wide

Saw ScabbardSBuckingham's line of pruning saw scabbards are made from the highest quality top grain leather or rubberized belting material. They feature a 1/2" nylon washer and double thick leather spacers on the tooth side to ease inserting and removing the saw from the scabbard. A 1 1/8" steel ring is attached to the back, 3" down from the top, to suspend scabbard and saw closer to the user. Clean out openings on the side and bottom to prevent buildup of saw chips and dust in the bottom of the scabbard.

Saw Saw Model # Compatible Scabbards [Scabbard information & pictures below & on following pages]

Corona

Fanno

Gilmour

Hastings

Jameson

Marvin

7100-1, AC7240, Ac7241

16, 20

20, 20B, 2011, 2011B

P11004

SB-1C, SB-2, SB-4, SB-5U,

PS-3S-17, S-18,

S-19, S-20

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

6515CS65156C 6515 6515C 6515P 6515CP 6015 6015C 6223 6223C 6517 6517C 6515S 6222 6222C

X X


Model 6226C BeltingModel 6226 LeatherFits curved blade hand pruning saws with a 26" blade.30" (78cm) overall length26" (66cm) pocket depth

Saw ScabbardS

Model 6222C BeltingModel 6222 LeatherFits curved blade hand pruning saws with 22" and 24" blades.26" (66cm) overall length21" (53cm) pocket depth

Model 6515C BeltingModel 6515 LeatherDesigned to be used with curved blade hand pruning saws with up to a 16" blade.3 1/2" (9cm) x 19 3/4" (50cm) overall length3" (8cm) x 15" (38cm) pocket depth

Model 6208C BeltingModel 6208 LeatherStraight saw scabbards. Designed to be used with pruning saws with a 22" to 26" blade length. See below for ordering information.26" (66cm) overall length19 1/2" (50cm) pocket depth6221C Belting6221 Leather29" (74cm) overall length23" (58cm) pocket depth

Model 6515CP BeltingModel 6515P LeatherDesigned to hold curved blade hand pruning saws with a 16" blade. A leather pruner pouch is included to hold hand prun-ers.Scabbard3 1/2" (9cm) x 19 3/4" (50cm) overall length3" (8cm) x 15" (38cm) pocket depthPruner Pouch2 1/2" (5cm) x 5 3/4" (12 cm)

Model 6016C BeltingModel 6016 LeatherFits straight blade hand prun-ing saws with up to a 16" blade.19 1/2" (49cm) overall length14 1/2" (37cm) pocket depth


MiScellaneouS ScabbardS and GuardS

Model 6020 (Leather) Hydraulic Chainsaw ScabbardModel 6020C (Belting)3 1/4" (11 cm) x 15" (38 cm) Overall3 1/4" (8 cm) x 14 1/2" (37 cm) Pocket

Model 6019 (Leather)Manual Pruner Guard (Large)For pruners with 1 1/2" cutting capacity.Model 6019C (Belting)4 1/2" (11 cm) x 6 3/4" (17 cm)

Model 6030 (Leather)Single Edge Axe CoverModel 6030C (Belting)4" (10cm) x 9 1/2" (24cm)Blade end depth 5 1/2" (14cm)

Model 6031 (Leather)Hydraulic Pruner GuardModel 6031C (Belting)7 1/2" (19 cm) x 7 1/2" (19 cm) Overall6 3/4" (17 cm) x 6 3/4" (17 cm) Pocket

Model 6225-21 (Leather)Bow Saw BladeSpecify length when ordering.Model 6225-21 Fits 21" saw bladeModel 6225-24 Fits 24" saw bladeModel 6225-30 Fits 30" saw blade

Model 6217 (Leather)Brush Axe GuardModel 6217C (Belting)18" (45cm) overall depth12" (30.5cm) pocket depth6 1/2" (16.5cm) width

Model 62005 (Leather)Hydraulic Circle Saw GuardModel 62005C (Belting)Fits circle saws with 9" blades.

Model 60299C (Belting)Double Edge Axe CoverModel 60299 (Leather)5 3/4" (15cm) x 11 1/2" (29cm)

Model 6017 (Leather)Manual Pruner Guard (Small)Pruners with 1" cutting capacity.Model 6017C (Belting)3 3/4" (10 cm) x 4 1/2" (11 cm)

Model 6029 (Leather)Single Edge Axe CoverModel 6029C (Belting)3" (8cm) x 5" (13cm)


Canvas adders To Know:To assist our customers, to know exactly what materials and what options are available, we have designated characters to assist you in specifying how to build the product.

Canvas opTions:Buckingham has developed a line of canvas, coated vinyl , mesh and fiberglass products to accommodate and protect tools and equipment for linemen, arborists and industrial users. Our objective is to manufacture them of high quality materials to provide our customers a product that will provide years of service. Whether the product you need is to hold tools, carry tools, store tools or protect them, let us know so we can assist you to design a product if it is not available.

1 - Hard Bottom (4569 Series Only)

B1 - Blue Tuff Duck

B2 - Black Canvas

B3 - Black TNX (Vinyl Coated Polyester)

B4 - Black Magna Tuff

B5 - Blue TNX (Vinyl Coated Polyester)

B6 - Blue Magna tuff

B7 - PVC Coated Black Tuff Duck

B8 - Black Mesh

B9 - Blue Nylon (70 Denier)

B12 - Blue Mesh

C - Oval Bucket Nylon Handles

C1 - Tri-Suspension System (Canvas Only)

C4 - #4 Canvas

C6 - Camouflage (300/600 Denier)

C7 - Camouflage (1000 Denier)

G1 - Green Mesh

G2 - Green TNX (Vinyl Coated Polyester)

G3 - Green Canvas

G4 - Neon Green Cordura

G5 - Kelly Green Tuff Duck

G6 - Gold Tuff Duck

H1 - Hard Body (Mainly Oval Buckets)

K - PVC Bumper Bar to level while Suspended (Canvas Buckets)

L - Less Oval Bucket Hooks

M1 - Maroon TNX

M2 - Magnetic Strip

O - 1000 D Neon Orange

O1 - Orange TNX (Vinyl Coated Polyester)

O2 - Pumpkin Orange Cordura

P - Outside Pocket (4569 Series)

P1 - Purple Cordura

P2 - Neon Pink Cordura

P3 - Black Mesh Outside Pockets w/ Velcro Closure

P4 - Padded Bag

P5 - One Clear Vinyl Pocket

P6 - Purple Tuff Duck

R1 - Red Magna Tuff

R2 - Red Tuff Duck

R3 - Red TNX 18oz. (Vinyl Coated Polyester)

R4 - Red #8 Canvas

R5 - Rubber Bottom

R6 - Red Mesh

S - Adjustable Shoulder Strap w/ Pad

S1 - Bronze 4958 Swivel Snap

S2 - Two Attachment Snaps

S3 - Z-711 1" Snap

S4 - 1/4" Spliced Polypropylene Rope

S5 - Three Attachment Snaps

S6 - Adjustable Shoulder Straps (Backpack Style)

S7- Built-in Stiffener

S9 - 3/4" Wed with Snap & Dee Attachment Straps

T - Oval Bucket add 2" to height

T1 - Oval Bucket Cover

T3 - Drawstring Closure

V - Velcro Closure

W1 - Wheel/Handle Mechanism

W2 - All Terrain Wheel Assembly

W3 - All Terrain Wheel Assembly w/ Fixed Axle

Y - Yellow TNX 180z. (Vinyl Coated Polyester)

Y1 - Yellow TNX 22oz. (Vinyl Coated Polyester)

Y2 - Yellow Cordura

Y3 - Yellow Canvas

Y5 - Yellow Canvas #4

CusTom Logos & arTworKContact us for custom logos and artwork of all your canvas products. Contact customer service for additional information.


aeriaL aCCessories

45455Aerial Bucket Covers4545 Aerial Basket Cover - This 18oz. vinyl coated nylon cover holds snugly on standard one-man buckets with a heavy sewn in bungee cord and snap to secure to the bucket. The secure grommet hole may be used to install tie line or for hang-up loop. Fits up to 50" square bucket.

45455 Aerial Basket Cover with a fiberglass pyramid shaped insert 29" x 29" to fit various buckets. Increases water drainage. Outer cover same as 4545.454551 - Fiberglass insert only.

4548 Aerial Basket Cover in a larger size to fit two-man baskets. Fits up to 50" x 62" basket.

* Aerial covers are available in orange, black, and yellow 18oz. vinyl.

4545 - (Orange) 4545Y - (Yellow) 4545B3 - (Black)

45150 (12" dia. x 48" length)• Madeofheavyweightcan-

vas• 3/8"polypropylenehandle• Molded12"bottomwith

drain holes• Availableinyellowor

orange coated nylon, add Y for yellow or O1 for orange to end of model number

• Alsoavailablewithsnap,add S1 to end of model number

• SolidPVCring

45151 (12" dia. x 60" length)

Line Hose Bags

Hose bags are used for numerous purposes such as hoisting materials up and down poles or hot stick "caddy" for multiple sticks on a pole or aerial basket.

451509S1Line Hose Bag that measures 9" diam-eter x 48" high. • PVCringintop• Bronzeswivel

snap• Plasticbottom

45158S1-44An extra large sized Line Hose Bag. • 18"diameterx44"high

is large enough to store line hose or other mis-cellaneous equipment

• IncludesaPVCringintop, bronze swivel snap and hard bottom

Hot Stick Bags

45152• Madeof18oz.yellowcoatednylon• Heavydutycarryhandle• Variablelengthsavailable• Alsoavailableinorangecoated

nylon, add O1 to end of model number

Model 45152 6" x 72"Model 45153 6" x 84"Model 45154 6" x 130"Model 45155 8" x 84"Model 45156 6" x 102"Model 45157 6" x 66"

Dimensions 6"W x 72"L

Fiberglass insert

Snap closure

Carry handle

new

Telescopic Hotstick Bag

45147Y•Measures9"Widex9"Deepx32"

High•Featuresahardbottomforadded

support•Suspendsonthebasketusing2stan-dardbuckethooks(NOTINCLUDED).

•Velcroclosuredesignedtokeepweather out

•Manufacturedwithheavydutyvinylcoated nylon.

•Includes2brassgrommettdrainholesin bottom.

4545


aeriaL aCCessories Aerial Tool ApronsAll Buckingham Aprons are designed to provide years of service using heavy vinyl coated nylon or heavy canvas duck. Re-inforcementandstiffenersareaddedwhereneeded.Allpocketshavegrommetsfordrainage.Therearetwo3/4"grommetswithreinforcedPVCrodsforsecuresuspension.

23 7/8"L x 4"W x 21 3/4"H

PVC cap bottom

PVC pipe insert for auger bit holder

11 socket pockets with grommeted drain holes

PVC pipe insert for auger bit holder

sewn in stiffener4500Y

2 nut and bolt bags

2 pocket holster

hammer loop

See bucket hooks on page 53.

18"L x 4"W x 10 1/2"H 4040

LargePocket

Built-in stiffenerDouble pockets

7 Pockets with 3 straps

18"L x 4"W x 10"H 4042

Pockets6" x 8"

PVC rod

PVC rodRivet reinforcements

18"L x 4"W x 19 1/2"H 4041

Knife snap

Sewn in stiffener Rivet reinforcements

LargePocket

8 ToolPockets

4500YM2

With magnetic strip to allow the lineman to store loose hardware and easily access it when required.

4045 26" H x 4" W x 28" L4044 29" H x 4" W x 24" L

Aerial Basket Tool ApronsAll pockets are sewn through two layers of vinyl coated nylon plus one layer of heavy canvas. The two large grommet holes are used tosuspendtheapronfromthebucketusingBuckinghamPVCorpolymer hooks.

Heavy Canvas Tool Apron4048To mount on door panel to hold miscellaneous small parts. • Overall171/2"Wx28"L• Pockets–8-eachmeasuring8"Wx63/4"Deep

•4PVCrodstomaintainrigidity

•Twohooks3/8"plasticcoated.

Hooks with clip.

Hooks not included Hooks not included

Hooks not included

Hooks not included

Hooks not included Hooks not included Hooks not included


2401

PVChooksareformedfromPVCRod.Thesehooksareeconomicalandofferawidevarietyofstyles.

• Fits21/4"BucketLip• Yellowmodel11/16"O.D

polymer• Maintainsitsstrengthand

flexibility through temperature extremes

• Fits3"BucketLip• Yellowmodel11/16"O.D

polymer• Maintainsitsstrength

and flexibility through temperature extremes

5058Aerial Basket 5/8"stock(pr.)

5134 S-Hook3/4"stock(ea.)

5434 AerialBasket3/4" stockfits41/2"lip(pr.)

Sold in pairs

aeriaL aCCessories HooKs

BUCKingHAM nYLOn, POLYMer And PVC HOOKS FiT A Wide rAnge OF AeriAL BUCKeTS And SerVe MAnY APPLiCATiOnS

Polymerhooksaremoldedfromamixtureofplasticsandnylonthatgivethemhighbreakingstrengthandexcel-lent cold resistance.

new from Buckingham! A strong polymer hookthatfeaturesa1/2"taperedendal-lowing the user to hang up to four rubber blankets from an aerial basket without rippingtheeyelets.Fitsuptoa3"widebucket lip.

2405

2401-3

The2403hookismadeof100%nylonandisvirtuallyindestructible if used in normal conditions:

• Stretcheshorizontallywithoutbreakingat1,000lbs.• Retaintheirphysicalpropertiesupto200degreesF(+93.3°C)andaslowas-40degreesF(-4.4°)

• Fits3"BucketLip• 5/8"stock

nylon HookSold in pairs

2403

5358AerialBasketfits3"lip5/8"stock(pr.)

5175 Cross Arm Hook 3/4"stock(ea.)

5034 Aerial Basket 3/4"stock(pr.)


Nut & Bolt BagsBuckingham Canvas Nut & Bolt Bags are made from top quality, heavy cotton duck. Some nut & bolt bags are made of durable 6oz. leather. All bags have reinforced tops, drain holes and attachment straps.

Reinforced top

Tapered bottom4570

4570B2 4574

Canvas4570: 10" deep x 9" wide. U-shaped with no bottom corners to trap small parts.

4570B2: A 4570 in black canvas.

4570M2: With magnetic strip to allow the lineman to store loose hardware and easily access it when required.

4573: 10" deep x 9" wide. Same as 4570 but with reinforced vinyl bottom.

4571: 10" deep x 9" wide. Same as 4570, but with inside pocket (6 3/4" x 9 1/4").

45701: 10" deep x 9" wide. Same as 4570, but with inside pocket (6 3/4" x 9 1/4") and 1" friction buckle on straps.

45100: 9" deep x 9" wide.

4574: 9" deep x 9" wide. With rigid vinyl liner to keep pouch open.

Above bags available in black canvas (suffix B2), heavy duty orange (suffix O1) and yellow coated nylon (suffix Y).

4570M2

45703C4S9 45702C4S9

An Equipment Storage Bag with a drawstring top. A bag specially designed to keep miscellaneous parts and tools securely stored while working aloft. Snap/Dee attachment straps. Heavy weight canvas. Mea-sures 10"H x 3"W x 9"L.

Similar to model shown at left. Except elastic retainer prevents equipment from falling out while allowing easy access into the bag.

45100

45911M2

Finally, a canvas bag built with thelineman in mind. An inside pocketfor organizing spare parts, web loopsstrategically positioned to store cotter pins during work, a powerful magnet, and a reinforced bottom to prevent premature wear makes this baga must for any line worker. Measures 3" T x 8"W x 9"L

45713

The best built nut and bolt bag designed for many small parts that can

be easily inserted and removed. Measuring 3" T x 9" W x 9" L, it is bigger

than most bags. There is a plastic liner on the bottom of bag to help keep bag open and makes picking up small parts easier.

The extra wide gusset makes it easy to insert a gloved hand to remove parts. This bag is built

BuckTough - wear points have double thick canvas, the seams are secured with sturdy binder and the

inside pocket helps organize.


52994-Br5302

Leather ties

45772 45771S9 45771

Tower worKer nuT & BoLT BagsA line of Tool, Nut and Bolts bags manufactured with the tower worker in mind.• Reinforcedtopkeepsbagopen• Heavyweightcanvasforaddeddurability• AnoptionalVelcroclosureisavailabletokeep

contents securely stored• AvailablewithastandardtunnellooporDeering/

attachment straps• Measures10"Hx4"Wx10"L• Alsoavailablein16"high• Seebelowfororderinginformation.

Tunnel Loop Attachment45771Nut/BoltBag

45771-16Nut/BoltBag16"high

45772Nut/BoltBagw/VelcroClosure

45772-16Nut/BoltBagw/VelcroClosure16"high

Snap/dee Attachment Straps45771S9Nut/BoltBag

45771S9-16 Nut/BoltBag16"high

45772S9Nut/BoltBagw/VelcroClosure

45772S9-16Nut/BoltBagw/VelcroClosure16"high

5302Madeofheavyleatherforlong service and hard usage. This bag is considered a “must” by most linemen. With one of these spacious bags on your belt it is possible to carry loose tools, and connectors and remove with glovedhand.9"Hx31/2"Wx7"L

52994-BrA leather nut and bolt bag with leather thongs for attachment to a body belt. Snap closure helpscontainparts.9"Hx3"Wx 8.5"LAvailable in black, brown or burgundy. Brown is standard. AddBL(black)orBU(burgun-dy)toendofmodelnumberfor requested color.

5299-BrA strong pliable lightweight leather, ideal for maintenanceandrepairwork.10"Hx3"Wx9"L

52993-BrSameconstructionas5299exceptwith3insidepockets to store wrenches or screwdrivers. 10"H x 3"Wx9"L

5288Same construction as 5299 except has a tunnel piecetosliponbelt.10"Hx3"Wx9"L

Above bags are available in black, brown or bur-gundy.Brownisstandard.AddBL(black)orBU(burgundy)toendofmodelnumberfor requested color.

52993-Br Inside pocket

Leather straps w/grommet reinforced holes

5299-Br

Leather

5288


TooL BagsBUCKingHAM TOOL BAgS Are BUiLT TO LAST!

All tool bags have the following construction:• Heavycanvasorvinylcoatednylon• 1/4"doubletemperedMasonitebottom• Sixbrassstudsonbottom• Heavydutynylonwebhandlessewnaroundthebag• Heavysteeltopframeenclosedincanvas• Topgrainreinforcedleatherstrapsaredoublerivetedwithleatherwashers• Industrialweightnickelplatedsnapsonpockets• Heavyvinylcoatednylonbottomreinforcementandweathersealed• Anytoolbag11"wideby24"longcanbemadewithhardrubberbottomby

adding the suffix R5• Availableinavarietyofcolors[seematerialchart]•Anytoolbagcanhaveashoulderstrapbyaddingsuffix'S'

45333r5SYDimensions 19"H x 11"W 24"L• Twoinchmoldedrubberlipprotects

against water getting into bag• Heavygaugerubberforsuperior

strength• Therigidityoftheformedrubberbottom

allows bag to maintain its shape• Doublestitchedbodytotherubber

bottom• Cleatsonbottomaredesignedto

prevent water from being absorbed

45300CDimensions 15"H x 7"W 20"L• Madeofheavydutycanvas• Oneinsidepocketforsmallparts• Leatherhandlesandstraps• 45300C-24 same as 45300C

Dimensions 15"H x 7"W x 24"L

45334Dimensions 12"H x 9"W 16"L• Webhandles• Leathersnapclosure• Reinforcedbottom

45333SDimensions 17"H x 11"W 24"L w/Two Outside Pockets• Madeofheavydutycanvas• Adjustableandremovablenylon

shoulder strap with leather pad for comfort

• Twosidepocketsforstoringprotectors, sockets and miscellaneous tools

• Onepockethaselasticsocketholders

• Pocketbottomsaredoublelinedfor added wear

• VelcroclosurerainflaplinedwithTNX for added protection

45332Dimensions 17"H x 11"W 24"L w/One Outside Pocket• Madeofheavydutycanvas• Onelargeoutsidepocketfor

storage of protectors or tools

45331YDimensions 17"H x 11"W 24"L• Madeofheavydutyyellow

coated nylon• Completelyweatherproofwith

fold over storm flap• Roomyinsidepocketforstorage

of small parts


An economically priced equipment bag with features and quality of bags costing much more. • Twolarge(20"x5"x11")outsidepocketscanbe

secured with three snap fasteners• Vinylcoatednylonrainflapandheavy-dutyleather

straps and buckle to secure bag closed

41333

Hard rubber bottom equipment bag with 2" molded rub-ber lip to prevent water seeping into the bottom of the bag. • Heavygaugerubberbottomisdoublestitchedtothe

bag and is very durable, even in cold weather• CanbemanufacturedonanyBuckinghamequipment

bag measuring 11" wide by 24" long. Add suffix ‘R5’

41333r5SY

41333O1r5W1rubber Bottom Tool Bag with Wheels

Some of the advantages are:• Idealfortransportingequipmentbetweentrucksortore-

mote work sites.• Heavy-dutyrubberwheelsdesignedforyearsofuse.• Pushbuttonhandleretractswhennotinuse.• Wheelscanbemanufacturedwithany11"wideby24"longrubberbottomtoolbagbyaddingSuffix‘W1’.IE.Model4133301R5SW1.

Small Tool Bag

•Heavycanvasformaximumdurability•Heavydutyzipperclosure•TemperedMasonitebottom•1”webcarryhandles•Measures14”Lx9”Hx6”W

Small Tool Bag

•Heavycanvasformaximumdurability•Twolargeoutsidepocketwithsnapfasteners•Heavydutyzipperclosure•TemperedMasonitebottom•1”webcarryhandles•Measures14”Lx9”Hx6”W

506 506P7-14


Dimensions 12"Dia x 13"H

45299

Dimensions 17"L x 24"H x 6"W

• Constructedofheavycanvas• Reinforcedbottomforwearability• Doublecarryhandlesforaddedstrength• Hundredsofuses

uTiLiTY Bags You'll find many uses for these popular bags!

Often used for storing rain gear, personal protective equipment, blankets, safety vest, safety equipment and many other uses.

Dimensions 18"L x 9.5"H x 9.5"W

• Idealforcarryingpersonalfallprotection equipment

•Madefromheavyweightredwater resistant polyester

• Strongnylonhandles1,000lb.break strength

• Nylonzipperclosurethatwon’tcorrode or bind

• Availableinblue,addsuffixBtoend of model number

45400r2-18

AlsoavailableModel45400-12(12")and45400-24(24"). Same construction as standard 45400 except length difference. Also available in blue, add suffix B to end of model number.

AnextralargeDuffelBagdesigned to carry mis-cellaneous equipment. Measures12"diameterx36"long.

45402r2-36

45297

• Doubleplybottom• Grommeteddrain

hole• 13/4"webhandle/

shoulder strap

Dimensions 56"L x 22"W Tapered

• Madefromheavydutyyellowcoatednylon

• Strongnylonhandlessurroundthebag for added carrying strength

• Snapclosuresalongentirelength• Fits7'tripod• Availableinorangecoatednylon,addsuffixO1(orange)toendofmodelnumber

• Model50039Bfits9'tripod

50037BY (Tripod Bag)


• Madefromheavydutyyellowcoated nylon

• Idealforcarryingorstoringwinches, safety gear, etc.

• Nylonzipperclosurewon'tcor-rode or bind

• Strongnylonhandles1,000lb.break strength

• Availableinorangecoatednylon,add suffix O1 to end of model number

5000B

Dimensions 13" H x 11" W x 22" L

• Webhandles• 1outsidepocket• Insidepocket• LeatherstrapclosureonbagandpocketsForshoulderstrapaddsuffix'S'.

45521


TooL / nose Bags Total Quality from the inside Out

ToolBucketshavemanyuniquefeaturesthatmakethemEXTRATOUGH!

rope Splice - the more weight you put in the bucket, the tighter it gets.

Solid PVC ring - stronger than typi-calPVCrodtapedtogether. Top Ring is solid continuous, moldedPVC material.

Bottoms - high impact thermoplastic rubber or leather - the strongest in the industry.

Polypropylene rope - won’t rot.

Leather Side Supports - at rope holes prevent abrasion to canvas.

nylon Thread - heavy nylon thread won’t rot. Seams and hems won’t separate.

Unique Construction - canvas is folded over outside stitches to protect thread from abrasion which could cause the bottom to fail. Also stitched again on outside for added strength.

5" Dia. x 7"H

Mini Tool Buckets 1231 1230

• Canbeusedforconnectors,nutsand other small items

• Canbesetondeskorhunginvehicle for other uses

• Greatforsafetyawards

11216 Same as 11215, but without pocket11217 Same as 11215, but without snap11218 Same as 11215, but without pocket and snap

12" Dia. x 15"H

11215• Heavycanvasconstruction• SolidcontinuousPVCringintop• Polypropyleneropewith4958

brass swivel snap• 8"x8"insidepocket• LeatherbottomreinforcedwithMasonite

16" Dia. x 23"H

note: Buckets may be made of yellow TnX material by adding suffix 'Y' to the model number. i.e. ... 1215Y.

11227 (The Big One)• Heavycanvasconstruction• 8"x10"insidepocket• Polypropylenerope• Reinforcedleatherbottom

309C• Heavycanvasconstruction• Steeltopring• Polypropyleneropewith4958

brass swivel snap• Insideglovestrap• Moldedrubberbottom

12" Dia. x 15"H

1216 Same as 1215, but without pocket1216P Same as 1215, but with 15 inside pockets1217 Same as 1215, but without snap1218 Same as 1215, but without pocket and snap

1215• Heavycanvasconstruction• SolidcontinuousPVCringintop• Polypropyleneropewith4958

brass swivel snap• 8"x8"insidepocket• Moldedrubberbottom

1215T31215 with drawstring top •Idealtokeeptrashfrom

coming out during travel 9" Dia. x 11 1/2"H


312C12"Dia.attop,9"Dia.atbottomx13"H• 12"steelringintop• Insideglovestrap• Manilaropewith4958

brass swivel snap• Moldedrubberbottom• Heavycanvas

4958• LightDutyHandline&Tool

Bucket Swivel Snap (not for humansupport)

• 3/4"(19mm)Eye• 31/4"(83mm)Length• 1/2"(13mm)Opening

Tapered Tool Buckets

Splicer Tool Buckets

11213• PVCmoldedtopring• Polypropyleneropewith4958

brass swivel snap• 4outsidepockets• 2insidepockets• Moldedrubberbottom• Heavycanvas

1213 Canvas Body - rubber bottom11213 Canvas Body - rubber bottom with swivel snap11223 Canvas Body - leather bottom11233 Canvas Body - leather bottom with swivel snap

9" Diameter x 12" High

Splicers Tool Buckets

12" Diameter x 22" High

11229• PVCmoldedtopring• Polypropyleneropewith

4958 brass swivel snap• 4outsidepockets• 2insidepockets• Moldedrubberbottom• Heavycanvas

1219 Heavy Canvas Body rubber bottom11219 Heavy Canvas Body leather bottom11229 Heavy Canvas Body rubber bottom with swivel snap11239 Heavy Canvas Body leather bottom with swivel snap

note: Without swivel snap order 1219.

122012"Dia.attop,9"Dia.atbottomx13"H• PVCmoldedtopring• Polypropyleneropewith

4958 brass swivel snap• Moldedrubberbottom• Heavycanvas

31112"Dia.attop,9"Dia.atbottom x 14"H• PVCmoldedtopring• Polypropyleneropewith

4958 brass swivel snap• Moldedrubberbottom• Heavycanvas

1228S8• 9"diameterx12"Hwithloopsto

accommodate up to 20 Amp tool cartridge shells

• Anextralargegrommetcanbeusedto suspend off a bucket hook

• Includesabronzeswivelsnap

121514• PVCring• 14outsidepockets• Heavycanvas• Rubberbottom• 12"Diameterx12"High w/14outsidepockets


All oval buckets are available with Hard Body style, add H1 to end of model number, example 12165H1. Oval buckets can have the bumper feature by adding the suffix letter "K" to the model number.

Dimensions 14" L x 10"H x 6 1/2"W Dimensions 14" L x 10"H x 6 1/2"W

Dimensions 14" L x 10"H x 6 1/2"W

ovaL BuCKeTsBuckingham oval buckets are designed to accommodate your needs. They are built to last and provide the user withenoughvarietyofconfigurationstomeeteveryneed.Ifwedon'thaveonethatmeetsyourneedswecanbuild one that does.

12163• Heavycanvasfor

maximum durability• 13outsidetoolpockets• Nylonwebcarryhandles• Durablemoldedbottom

with drain holes• Moldedtopring

12165L• Heavycanvasfor

maximum durability• 14outsidetoolpockets• Nylonwebcarry

handles• Large13/16"

grommet hole• Durablemoldedbottom

with drain holes• Moldedtopring• PVChooksnotincluded


12166• Heavycanvasformaxi-

mum durability• 8insidetoolpockets• Large13/16"grommethole• Durablemoldedbottom

with drain holes• Moldedtopring• Two5334PVChooks

included• WithoutPVChooksorderModel12166L

121656 Same as 12166 with 15 outside pockets



maximum durability• 15insidetoolpockets• 2polypropyleneropes

connected to a heavy snap for suspension

• Durablemoldedbot-tom with drain holes

• Moldedtopring

12164• Heavycanvasformaximum

durability• 12shellloopsonfront• Insidepocket8"x5"• Large13/16"grommethole• Durablemoldedbottomwith

drain holes• Moldedtopring• Two5334PVChooks included• WithoutPVChooksorderModel12164L

12161• Heavycanvasformaximumdurability• 15insidetoolpockets• Builtinsidestiffenerssobucketwon’t collapse• Large13/16"grommetholes• Moldedtopring• Two53343/4"buckethookby3"width included• Durablemoldedbottomwithdrainholes• WithoutPVChooksorderModel12161L•Dimensions14"Lx10"Hx61/2"W

12161M2With magnetic strip to allow the

lineman to store loose hardware and easily access it when required.

Hooks not included

Hooks not included

Hooks not included

Two53343/4"buckethookby3"widthincluded


ovaL BuCKeTs




12169H1K• Heavycanvasformaximum

durability• 12insidepockets• PVCbumpertokeepbucket

from tilting on bucket• Moldedrubberbottom• Two53585/8"x3"wide bucket hooks included• WithouthooksorderModel

12169H1KL

121615CH1L• 14Outsidetoolpockets• 15insidepockets• Canvasexteriorwithhard

body• Nobuckethooks• Moldedtopring• Heavycanvas• Nylonwebhandles


durability• 6insidepockets• Large13/16"grommetholes• Moldedbottom• Two5334PVChooks

included• Withouthooksorder Model12167L

nOTe: The 12167H1 will beconstructed with canvasexterior with a plastic liner.


maximum durability• 9insidetoolpockets• 1insidetoolpouch• Moldedrubber

bottom• Two5334PVChooks

included• Withouthooksorder Model12168L

All oval buckets are available with Hard Body style, add H1 to end of model number, example 12167H1. Any oval bucket can be made with the bumper feature by adding the letter"K" to the model number.

12168K• Sameas12168

with bumper added

•Includes25334PVChooks.


durability• 26inside,and15outside

pockets• Moldedtopring• Durablemoldedbottomwith

drain holes• Manilasuspensionropewith

4958 brass swivel snap• Measures 14”Lx10”Hx61/2”W

Street Light Bulb Bag: This bag is designed to carry oversized bulbs aloft in an aerial basket. Solid luan bottom and hard body construction helpkeepbagrigid.Grommetinbottom provides adequate drainage.

Hooks not included

Hooks not included

1216OS1H1LHooks not included MeASUreS 25" L X 14" H X 12.5" W


For canvas material drop the suffix "Y".

All glove bags can be made of orange or yellow vinyl by adding O1 (fororange)orY(foryellow)toendofmodel number.

reinforced Snap For Hanging


gLove Bags

Straight Sides

455400• Heavydutycanvas• Nickelplatedsteelsnapfas-

teners• Doublestitchrollededges• Grommetedholeinbottomfor

ventilation• Backsnapwithleatherholder

for hanging• Straightsided

Tapered Sides

455805Y• YellowTNX• Doublestitchedrollededges• Grommetedholeinbottomfor

ventilation• Backsnapwithleatherholder

for hanging• Gussetedsides

glove and Sleeve Bag

521• Heavydutycanvas• Velcroclosure• Backsnapwithleatherholderfor

hanging• Grommetedholesinbottomfor

ventilation• Doublestitchedrollededges

Pockets glove SleeveNo.519 171/2"x31/2" 19"x31/2"No.521 17"x4" 20"x4"

glove-Sleeve and goggle Bag

418• Heavydutycanvas• Nickelplatedsteelsnap

fasteners• Glovepocket18"x41/2"• Sleevepocket20"x3"• Gogglepouch7"x4"• Backsnapwithleather

holder for hanging

“Hard Body” glove Bag

455200H1• Heavydutycanvas• Rigidpolyethyleneonsidesto

prevent collapsing• Grommetedholesinbottomfor

ventilation• Velcroclosure• Backsnapwithleatherholderfor

hanging

CottonDuck

Straight SidesFor12"(31cm)gloves 455300For14"(36cm)gloves 455400For18"(46cm)gloves 455401

Tapered SidesFor14"(36cm)gloves 455805For18"(46cm)gloves 455895

Dimensions 14"L x 9"W x 3 1/2"D

Dimensions 14"L x 8"W x 6" [top] tapered to 3" [bottom] D


Sleeve roll-Up

4585• Nylonreinforcedvinyl• Velcrobuttonfastening• SizedtoholdX-longsleevesflat

without folding• Deeringtohangup• 321/2"x21"(83x54cm).

TradiTionaL sLeeve Bags & sLeeve roLL-up

Blanket roll-Up

4587• Heavydutycanvas• Webbingtiestraps• Sewnwebcarryhandle• 3'x6"

Hoist Bag

45148These sturdy canvas bags, with a #5258 hook to fit truck racks, provide a clean place to store nylon strap hoists, keeping them off the truck floor and extending the life of the hoist straps.

#45149fitstheEatonLittleMule#300and#344.AlsofitsLugAll#2and#3.36"long.

#45149 fits Lug All #4 and A.B. Chance 1 ton strap hoist. 42" long.

Available in yellow or orange coated nylon,addY(yellow)orO1(orange)to end of model number.

Sleeve Bag

528• Heavydutycanvas• Holds29"sleeves• Taperedtosupportsleeves

when hung on belt• Quickreleasesnapon

back• Snapclosuretop

Sleeve Bag

5231A30"longsleevebagthatcan fit up to 29" sleeves. Front Pocketaccommodatesupto18"gloves.FeaturesaVelcroretainer that prevents sleeves from falling to the bottom. Also features a glove liner dust pouch. All pockets have aVelcroclosure. Measures30"Lx3"W.

Blanket Bag

4588• Heavyyellowvinyl• Nylonzipperclosurewon’trustorcorrode• 13/4"nyloncarryhandles• 63/4"x401/2"


First Aid Blood Stopper Pouch

TheNewFirstAidBloodStopperPouchquicklyattachestoanyBuckinghamsaddleorbodybeltandcontainsonelarge blood stopper to control bleeding until the victim can be administered First Aid on the ground. Secures to any bodysupportusingeitheranattachmentsnapor3/4"steeldeering.

Measures 3 1/2" W X 5 1/2" H

4600S3Y First Aid Blood Stopper Pouch With Attachment Snap4600d1Y First Aid Blood Stopper Pouch With 3/4" Steel dee ring4600nY First Aid Blood Stopper Pouch With 1 3/4" nylon Belt Loop 1 Large Blood Stopper included with each Kit

Contents of First Aid Blood Stopper Pouch

safeTY iTems

rescue Buck

694• Height5'6"• Idealforpoletoprescuetraining,re-

trieval training and fall protection testing• Fillwithtirechipsorgrounduprubber

to get desired training weight• Looponbackforlifting• Loopsonfrontforholdingbodybelt• Separatecompartmentsforactuallife-

like movement

694F1• Buckmix–55lbs.ofrubberpellets

Specialty Products

5Y2-MArm Protectors

Designedtopreventsplintersinthe forearm during apprentice linemantrainingMadefrom1000 denier cordura for dura-biltiy.Measures16"long.


safeTY iTems warning fLags & marKers

Buckingham offers a wide variety of grounding, danger and line marker flags. All are constructed of a durable high visibility vinyl coated nylon for years of service. Custom screen printing, sizes and designs are available.

8454O3V

Hi-visibilityorangeGROUNDSflagwith two reflective strips on frontand back for easy visibility at night.Velcrostrapsfor a secure attachment. Wire attachment for hot line clamp on top andPVCstiffeneronbottom. Includes truck/radio#andservice location lettering along the top.Measures171/2"Hx161/2"W.

Toorderwithouttruck/radio#andserviceloca-tion lettering use part number 8452O3V.

8451g7P5V

Hi-visibilitygreenDANGERflagwithtwo reflective strips for easyvisibilityatnight.Velcrostrap for a secure attachment.Features a 61/2"x61/2"clearvinyl pocket on back-side for crew, truck orcompany information.PVCstiffenerontop.Measures181/2"Hx161/2"W.

To order without clear vinyl pocket and snap closure attachment instead use part number 8451g7S.

8453O1-45

Hi-visibilityorangeWORKERONLINEmarkerwith two reflective strips for easy visiblity when workingatnight.11/2"widevelcroisusedtosecurelywraparoundpole.91/2"longx7"wide clear vinyl pocket for truck, crew or com-panyinformation.Measures45"Lx7"H.

Also available in 50" model use part number8453O1-50.

8455g7-45

Hi-visibilitygreenLINEBEINGPATROLLEDmarker with two reflective strips for easy viewing at night. 11/2"widevelcroisusedtosecurelywraparound pole. 9" L x 6" W clear vinyl pocket for truck,creworcompanyinformation.Measures45" L x 6" H.

Also available in 50" model use part number8455g7-50.

new


speCiaLTY Canvas iTems

Jumper Cable Bag502• Madeofheavydutycanvas• Velcrotopclosures• 1"nyloncarryhandle• AvailableinTNX,add'Y' yellow,add'O'fororange

• 5"x13"x19"

Throw Line Bag4560

• Madeoftoughwaterresistantpolyester fabric

• Topdrawstringclosure• Usedforcarryingorstoring

throw line • Holdsupto100ft.• Drawstringclosurefoldoutfor

easy access to throw line• 8"x12"

4469B1-150The new Buckingham Back PackEquipmentBagmakesit easy to carry a rescue line, tools or miscellaneous equip-ment aloft. Outside mesh pocketswithVelcroclosureallows parts to be stored while being visible from the outside. Paddedshoulderstrapsaddto comfort. A drawstring top keeps equipment securely stored.Measures12"dia.x 16" high.

5081r3A bag specially designed to storeyour15KVJumpers.

• Aroomy5"highx20" longx3"deepinsidepocketwithaVelcroclosure.

• Durablecoatednylon material and 2 ply bottom for years of service.

• AnylonwebcarryhandleandVelcroclosure• Overalldimensionsare25"longx28"highx5"deep.

45775A belt mountedtool bag that measures14" high x 9" wide x 5" deep. Constructed from heavy duty canvas with steel rivets forreinforcements at all stress points. An 8" wide x 5" high x 1" deep inside pocket with two fasteners to keep parts securely stowed. Features 8 insidetoolloopsand2insidetool/bullpinholders.Tunnelpieceacceptsuptoa3"beltstrap.Reinforcedtoplipthatkeeps opening rigid.

Tower Beacon Carry Bag 526Allows the user to transport bulbs aloft.• Fourindividualcompartmentsinsure

glass bulbs will not come in contact with each other.

• Asnapallowsthebagtobeattached to a harness.

• A1/8"steelringonthebottomallowsmultiple bags to be attached.

• Avelcroclosurekeepscoversecurelyclosed.

• Measures14"highx8"deepx8"wide• Individualpocketsmeasuring

14" high x 4" deep x 4" wide.

rope Bag 4569r2-150• Madeofheavywaterresistant

cordura fabric • Topdrawstringtokeepwaterout

and rope or tools in• Sturdywheninuseyetcollapsible

for storage when not used• Holds150ft.of1/2"rope• Drawstringclosurefoldsoutward

to give easy access

4569r2-120: same as above except holds 120 ft. of rope 12" x 13"4569Pr2-150: same as above except has outside pockets to carry miscellaneous small parts 12" x 16"4569r2-225 or 4569Pr2-225 holds 225 ft. of rope 12" x 22"


HYdrauLiC TooL & BaTTerY sTorage Bags

Battery Tool Holder

4555

Overall Dimension – 14" x 4" x 14 1/2"Pocket Dimension – 6 1/2" x 4" x 14 1/2"

greenlee & Fairmont Tool Holder

MadetofitGreenleeandFairmontbatterypowered,slimprofile crimping tools.• Madeof1000DenierCordura®formaximumdurability.• NylonstrapwithVelcro®closurekeepstoolsecurely

stowed when not in use. • SnapandDeeringattachmentstrapcanbeusedtosecure

to a tool belt or suspend from an aerial basket hook.• Anyloncarrystrap,Model 4036S, can be purchased

separately and easily attaches to the holster to be used for working on a ladder or underground.

4036B4

Holster 4036B4

Strap4036S

Front Back

40351B3inline Hydraulic Crimper Carry Bag (251/2"Hx11"Wx7"D)

Designedtosafelycarry&storeaninlinecrimper, charger, batteries and dies. Tool pocket measures 22" long by 10" wide with aVelcro®closuretokeepthetoolsecurelystowed.Charger/batterypocket,withVel-cro®closure,measures91/2"longby83/4"wide.Diepocketmeasures71/2"longby7"wide and features an eleastic closure for easy access. Additional features include:• Adjustableshoulderstrap• Grommetsformountingtoanaerial

basket• Durablevinylcoatednylon

Compression Tool Holder

4035Y (22"Hx10"W)TwoPocketcarrybagdesignedtocarryan inline tool , spare baterries and dies. BothpocketshaveaVelcro®closurethat can be fastened out of the way for easy access to the pockets. Tool pocket measures 18" long by 8" wide. Accessory pocket measures 8" long by 7"wide.Additional features include:• Paddedbottomintoolpocketfor

added protection• Adjustableshoulderstrap• Grommetsformountingtoanaerial

basket• Durablevinylcoatednylon

Compression Tool Holder

4037• Heavyorangevinyl• Heavyneoprenenylon

bottom to prevent premature wear

• Grommetedholeinbottom for drainage

• Grommetedeyesintop for suspension from bucket

• 3pocketsforcompressiontools and/oracombinationofboltcutters

• Overalldimensions10"x26" Pocket1 15" Pocket2 18" Pocket3 22"

manuaL Compression TooL Bags


mesH Bags

45400g1-18

45400g1-9 4561g1See Through Storage & rope Mesh BagsTheseNewSeeThroughMeshBagsmakeiteasytolocate carabiners and small accessories. No lon-ger will you have to open every bag to find the right equipment.Meshmaterialalsoallowssufficientair-flow through the bag, which aids in drying wet gear.

Available in many different sizes and styles. See below for ordering information:

45400g1-9 5" diameter X 9" Long45400g1-12 9 1/2" diameter X 12" Long45400g1-18 9 1/2" diameter X 18" Long45400g1-24 9 1/2" diameter X 24" Long45400g1-30 9 1/2" diameter X 30" Long4560g1 8" diameter X 12" High4561g1 8" diameter X 10" High

Dimensions 13"L x 14"H

45500g1

• Madeofheavycoatednylon mesh to let the harness breathe

• Velcroclosure• Grommetreinforcedholefor

hanging• Allowsaircirculation

Private Label Logos Available

We'll give your logo center stage, imprinted on your Products.

Generate team spirit and company recognition with your Logo.

Keeping your name in front of your customers and employees is just

good business.

4540MB

The new mesh bag is designed to contain a full body harness or other soft goods when laundering. Can also be used to store and carry miscellaneous equipment. The mesh design allows air to flow through reducing the possibility of mold and mildew. A heavy duty draw string closure keeps equipment securely inside.

8" wide x 14" high.

4581

Ideal to hang on a step ladder to accommodate miscellaneous parts. A wire frame with a removeableheatresistantPVCcoatedmaterial.BagDimensions9"Dx7"Wx11"L

• Metalframetohangonladderrung

• Heatresistantmaterial• Bagremovesfromframe


fiBergLass aCCessories

Tool Trays4509

• 8.25"Wx8"Dx19"L• Builtonhangerfitsa25/8"basketlip• Reinforcedliparoundtray• Built-inbumperkeepstraylevel • 9"Wx11"Dx18"L

• PVChooks(#5334)included• Maybehunginsideoroutside

basket• B1Bumperavailable

4510

• 6"Wx8"Dx11.5"L• Builtonhangerfits33/4"basketlip• Idealfortroublelantern• B2Bumperisavailable

45124511

• 6.5"Wx19.25"Dx18.4"L• Builtonhangerandbumper

to keep level• Reinforcedliparoundedge

for added strength• Built-inbumperkeepstray

level

4510M2With magnetic strip to allow the lineman to store loose hardware and easily access it when required.

Bumpers are available to keep fiberglass tool trays and aprons level. Note the styles available:

B1 - Half Circle BumperB2 - L-Shape Bumper

B1 B2

4510M2


• 20"Wx18"L• Removeablefluorescentlightideal

to illuminate tools and bucket• Lightinterchangeswithsmall

pocket to hold test set• Numerouspocketstoholdalltools

needed• Augerbitholder• B1Bumperisavailable• Reinforced4-plyneoprenenylon

behind the leather pouches for added strength

• LightReplacementOrderPart Number 400094

• Lightillustratednotavailable

fiBergLass TooL apronsNowavailablewithholesinsteadofbuiltinhanger.HolesalignwithModel4510tooltray.Idealforhangingtooltray on outside of a basket and the apron inside the basket.

The 45006 is the top of the line tool board. It can hold numerous tools without having to carry them and it keeps them organized.

45006Reinforced Pouches

4501 Bare board - design your own board layout; 20" W x 18" L.45004 Model 4500 with 4226 four pocket holster replaces the 3 pocket holster.

• 20"Wx201/2"L• Augerbitholder• Wrenchandhammerloops• Canvasnutandboltbag• B1Bumperisavailable

• 20"Wx18"L• 3pocketholster• Wrenchandhammerloops• Canvasnutandboltbag• B1Bumperisavailable

•20"Wx18"L•4pocketholster•Wrenchandhammerloops•Knifepouch•5299leathernutandboltbag

45004505 45003


non-rotating Long reach Bucket Tool Holder

The economical long reach bucket tool holder offers the user a secure method to hold long reach tools horizontally on the bas-ketlipandverticallyinsidethebasket.Itdoesnotallowthetoolholdercliptorotate360degreesnorallowtheusertophysicallymove the clip from horizontal to vertical position as the 4590 model. The non-rotating version does provide the user a permanent verticaland/orhorizontalmount.Thisunitprovidesmultipleoptionstoaccommodatetheuser'sneedsasshownbelow:

Mounting Brackets

45894589 4589

45891

4589 45891

A combination of 4589/45891allowsuserto hold one saw hori-zontal and two vertical.

Mount4589and45891toholdmultiple tools - two vertical and one horizontal.

Mounttwo4589'stoholdonetool horizontal.

Two of the 4589 mounts allows user to hold one single stick.

Hydraulic Boom Tool Holders

Round Square Boom Boom

HANDLEEND 4530R 45301R Replacementclip 45302** 45302**

CHAIN SAW 4531R* 45311R* Replacementpocket 45312** 453112**

PRUNER 4532R* 45321R* Replacementpocket 45322** 453212**

CIRCULARSAW NA 453311R

*Extralongbaseavailabletopreventdamageto boom when inserting and removing tool; addsuffixC(i.e.4531RC)

**All replacement parts come with sticky backed foam and fasteners.

Square Boom

45301rSelect a Long Reach Boom Tool Holder:round Boom Square Boom4530R 45301RHandle4531R 45311RChainsaw4532R 45321RPruner

Long reach Hydraulic Boom Tool Holders

Handle Holder

4530r • Roundboom-mountwithratchetclosure• Clipspringacceptshandleendofhydraulictool(replacementclip,order45302)

• Redesignedspringclips–now more durable• Foampadtopreventslippageonboom

4532r

Pruner Holder• Roundboom-mountwithratchet• Bonnetfithydraulicpruner• Foampadbacktopreventslippage

Note:Forlongerbaseorder4531RC

4531r

Chainsaw Holder• Acceptschainsawhead• Ratchetclosuretoattachtoboom• Foambacktopreventslippage • Extralongtoshieldboom

45311rC


A bumper is available to keep holders level. See page 16.

misCeLLaneous fiBergLass TooL HoLders

4522M

• 4.5"Wx10"L• EquippedwithStreamlightbase• Builtinhangertofitover33/4"

basket lip• Lightsoldseparately• B2Bumperisavailable

Order without Streamlight charger. 4503Bcomeswith4barrelfastenersto mount your own recharger.

4503 4503B

Fiberglass Bucket Step

45502The Fiberglass Bucket Step provides the user ease in and out of the bucket. This unit will enable the user to step out of the bucket to other elevated work surfaces where work prac-tices allow. Two 4" wide steps with a nonskid surface and leveling bumper make climbing easier and safer.

Dimensions 12"W x 27 1/2"L

Built-in bumper keeps step level.

Fiberglass Step

4550• Reinforcedtosupport300lbs.• Easesteppingintoandout

of the basket• Smallenoughnottointerfere wheninbasket–24"long

• B1Bumperisavailable

4514• Designedtoholdmost

chainsaws• 8.5"Wx33"L• Mountsoutsideorinside• Springspreventfallingoffifmountedoutside• Reinforcedsides• B1Bumperisavailable

Replacement pocket, order 45141.

Chainsaw Scabbard

4514Wwith reinforced pocket for added durability of the chainsaw pocket. Reinforced replacement pockets are available and can be ordered with part number 45141W.

• 9.5"Wx13"L• Built-inhangertofitover33/4"

basket lip• Acceptsmostimpactwrenches.

Stanley - IW05, IW08, IW09 and IW04 Fairmont - 6500, 6505, 6505A and 8508

• B2Bumperisavailable


noTes


Economy HarnEssEsOur standard design Economy Harnesses are made from Type 13 (7000 lbs nylon) nylon webbing with orange upper and black lower sections and meet all applicable ANSI and/or ASTM standards. Except for a Universal fit harness, order by adding size S, M, L, X, to part number; non-standard sizes available upon request.

‘H’ style full body harness. Features:• Heightandlegstraplength

adjustment through the interlocking buckles at the leg positions.

• Fixedpositioninterlockingcheststrap buckle.

• Interlockinglegstrapbuckles.• SteelDeeringdorsalattachment.• Onesizefitsmost;non-standard

sizes available upon request.

A no metal and light weight ‘H’ style full body harness. Features:• Velcro®cheststrapthatmeets

ANSI Z359.1 requirements.• Reinforcedwebloopdorsalattach-

ment used to half hitch a shock absorbing lanyard.

• Stepinlegstraps.• Noheightorlegstrapadjustment.

An economically priced ‘H’ style full body harness with height and leg strap adjustability for just the right fit. Features:• Velcro®cheststrapthat

meets ANSI Z359.1 requirements.

• Interlockinglegstrapbuckles.• SteelDeeringdorsal

attachment.• Standardfrictionbucklefor

vertical adjustment.

S = Small; M = Medium; L = Large, X = Extra Large; XX = 2X; XXX = 3X.

U64A23H6E00 6381700 63936E00T2

HARNESS SIZING MATRIXCHEST SIZE

Indicates meets ASTM F887 Electric Arc Performance Requirements.

BuckingHam standard HarnEssEsBuckingham Manufacturing offers a full array of standard design full body harnesses to be used in fall arrest, work positioning, suspension, retrieval and rappelling applications. Standard design harnesses are returnable and can be ordered in sizes S, M, L, & X.

Buckingham Manufacturing allows you to design a harness from our matrix or to specify a non-standard size. We’ll manufacture the harness to accommodate your needs. Non standard harnesses and sizes are not consid-ered standard design and therefore are not returnable.

HEIGHT 34-36 38-40 42-44 46-48 50-54 56-60

5' 4"- 5' 7" S S M L X XX

5' 8"- 5' 11" S M L X XX XXX

6' 0"- 6' 3" M M L X XX XXX

6' 3" + L L X X XX XXX


Basic HarnEssEsOur standard design Basic Harnesses are available in both ‘H’ & ‘X’ styles and have contrasting color upper and lower sections for easy donning. They meet all applicable ANSI and/or ASTM standards. Order by adding S, M, L, X, to part number; non-standard sizes available upon request.


603B3700-Web Dorsal Loop [shown]or 603B3600Steel Dorsal Dee

An ‘X’ style full body harness featuring:• Interlockingtorso&legstrapbuckles

with leather chafes.• Weblooporsteeldeedorsal

attachment.• Reinforcedwebfrontloopthatcanbe

used for rescue or rope/cable grab.• Cheststrapsewnabovewebloopto

prevent spreading.• MadefromType13nylonwebbing

with orange upper & black lower sections.

603E3700R3-Web Dorsal Loop [shown]or 603E3600R3-Steel Dorsal Dee

An ‘X’ style full body harness featuring:• Interlockingtorso&legstrapbuckles.• Weblooporsteeldeedorsal

attachment.• Fullyadjustableinterlockingtorso

buckles are for height adjustment.• Reinforcedwebfrontloopthatcanbe

used for rescue or rope/cable grab.• MadefromType10(R3)nylonweb-

bing with red upper and black lower sections.

• Nochafesbehindbuckles.

6383700-Web Dorsal Loop [shown]or 6383600-Steel Dorsal Dee

An ‘H’ style full body harness featuring:• Velcro®cheststrapthatmeetsANSI

Z359.1 requirements.• Interlockinglegstrapbuckleswith

leather chafes.• Weblooporsteeldeedorsal

attachment.• MadefromType13nylonwebbing


• Noverticaladjustmentbecausetheharness has no metal above the waist.

6483600-Steel Dorsal Dee [shown]or 6483700-Web Dorsal Loop

An ‘H’ style full body harness featuring:• Interlockingcheststrapbucklewith

leather chafe.• Interlockinglegstrapbuckleswith

leather chafes.• Steeldeeorwebloopdorsal

attachment.• MadefromType13nylonwebbing


• Noverticaladjustment.

6493500D1R3 Steel Chest Buckle [shown]or 6393500D1R3 Velcro® Chest Strap

An ‘H’ style full body harness featuring:• Interlockingcheststrapbuckleor Velcro®cheststrap.

• 24"[61cm]dorsalpigtailwithsmalldee ring.

• Standardfrictionbuckleforverticalheight adjustment.

• MadefromType10nylon(R3)web-bing with red upper and black lower sections.

• Nochafesbehindbuckles.• Interlockinglegstrapbuckles.

An ‘H’ style full body harness featuring:• Velcro®cheststrapthatmeets

ANSI Z359.1 requirements.• Interlockinglegstrapbuckleswith

leather chafes.• Weblooporsteeldeedorsal

attachment.• Standardfrictionbuckleforheight

adjustment.• MadefromType13nylonwebbing


6393700-Web Dorsal Loop [shown]or 6393600-Steel Dorsal Dee


Basic HarnEssEs...continuEd

HigH End HarnEssEsOur standard design High End Harnesses are available in both ‘H’ & ‘X’ styles and have contrasting color upper and lower sections for easy donning. They feature the Buckingham patented split tongue Quick Connect Buckle for ease of use and adjustability and they meet all applicable ANSI, ASTM & OSHA standards. Order by adding size S, M, L, X, to part number; non-standard sizes available upon request.

6493600K-Steel Dorsal Dee [shown]or 6493700K-Web Dorsal Loop

Kevlar®‘H’stylefullbodyharness featuring:• Interlockingcheststrap&legstrap

buckles, all with leather chafes.• Steeldeeorwebloopdorsal

attachment.• Frictionbucklesmountedonvertical

shoulder strap for height adjustment.• MadefromKevlar®withyellowupper

and black lower sections.

6494600-Steel Chest Buckle [shown]or 6394600-Velcro® Chest Strap

An ‘H’ style full body harness featuring:• InterlockingcheststrapbuckleorVelcro®cheststrap.

• Tongue&GrommetBucklelegstraps.• Steeldeedorsalattachment.• Frictionbucklesmountedonvertical

shoulder strap for height adjustment.• MadefromType13nylonwebbing


6493700R3-Web Dorsal Loop [shown]or 6493600R3-Steel Dorsal Dee

An ‘H’ style full body harness featuring:• Interlockingchestandlegstrapbuck-

les - no chafes behind buckles.• Weblooporsteeldeedorsal


shoulder strap for height adjustment.• MadefromType10(R3)nylonweb-

bing with red upper and black lower sections.

6398C700-Web Dorsal Loop [shown]or 6398C600-Steel Dorsal Dee

An ‘H’ style full body harness that’s ideal for the user who wants to minimize the amount of metal above the waist. Fea-tures:• Velcro®cheststrapthatmeetsANSI

Z359.1 requirements.• LegstrapswiththeBuckinghampatentedsplittongueQuickConnectBuckles and leather chafes.

• Weblooporsteeldeedorsal attachment.

• Frictionbucklesmountedonverticalshoulder strap for height adjustment.

68D98C600-Steel Dorsal Dee [shown]or 68D98C700-Web Dorsal Loop

An ‘H’ style full body harness featuring:• TheBuckinghampatentedsplittongueQuickConnectBuckleswithleather chafes on the chest and leg

straps.• Steeldeeorwebloopdorsal


shoulder strap for height adjustment.

603S8C700-Web Dorsal Loop [shown]or 603S8C600-Steel Dorsal Dee

An ‘X’ style full body harness featuring:• TheBuckinghampatentedsplittongueQuickConnectBuckleswithleather chafes on the leg straps and at the torso for height adjustment.

• Weblooporsteeldeedorsal attachment.

• Reinforcedwebfrontloopthatcanbeused for rescue or rope/cable grab.


BuckFit & BuckFit Fr HarnEssEsThe standard design Buckfit harnesses are uniquely constructed for the user’s safety, comfort and ease of use. Thefullbodyharnessslipsonlikeavest[‘H’style]orpullover[‘X’style]-nomoretwistedloopsofwebbingtountanglebeforeyoustartyourday!TheymeetallapplicableANSIstandardsandournewBuckfitFRHarnesseshaveaKevlar®meshshellthatmeetstheASTMF887ElectricArcperformancerequirements!Orderbyaddingsize S, M, L, X, to part number; non-standard sizes available upon request.


ThisBuckfit[shown]isan‘X’stylefullbodyharnessfeaturing:• ADri-lex®shellthatisdesignedtowickmoistureawayfromthe userwithpaddedDri-lex®shoulderandlegpadsforaddedoverall comfort.

• TheBuckinghampatentedsplittongueQuickConnectBuckles with leather chafes on the leg straps and at the torso for height adjustment.

• Weblooporsteeldeedorsalattachment.• Areinforcedwebfrontloopcanbeusedforrescueorwitha

rope/cable grab.• MadefromType13nylonwebbingwithsilverupperandblack

lower sections.• MeetsapplicableANSIstandards.

603S8C700V9-Web Dorsal Loop [shown]or 603S8C600V9-Steel Dorsal Dee

ThisBuckfitFR[shown]isan‘X’stylefullbodyharnessfeaturing:• AKevlar®meshshellthatisdesignedto“breathe”.• FRfoampaddedshoulderandlegpadsforaddedoverall

comfort.• TheBuckinghampatentedsplittongueQuickConnectBuckles

with leather chafes on the leg straps and at the torso for height adjustment.

• Weblooporsteeldeedorsalattachment.• Areinforcedwebfrontloopcanbeusedforrescueorwitha

rope/cable grab.• MadefromType13nylonwebbingwithsilverupperandblack

lower sections.• MeetsASTMF887andallapplicableANSIstandards.

603S8C700K1-Web Dorsal Loop [shown]or 603S8C600K1-Steel Dorsal Dee

TheBuckfitFR[shown]isan‘H’stylefullbodyharnessfeaturing:• AKevlar®meshshellthatisdesignedto“breathe”.• FRfoampaddedshoulderandlegpadsforaddedoverall

comfort.• Velcro®cheststrapthatmeetsANSIZ359.1requirement.• TheBuckinghampatentedsplittongueQuickConnectBuckles

with leather chafes on the leg straps.• 18"[45.7cm]dorsalpigtailwithsmalldeeringtoattacha41/2'[1.37m]shockabsorbinglanyard.

• Springloadedfrictionbucklesforheightadjustment.• MadefromType13nylonwebbingwithsilverupperandblack

lower sections.• MeetsASTMF887andallapplicableANSIstandards.

637G8C500CK1- FR w/ Dorsal Pigtail [shown]or 637G8C500CV9- Non FR w/ Dorsal Pigtail


This Buckfit [shown] is an ‘H’ style full body harness featuring:• ADri-lex®shellthatisdesignedtowickmoistureawayfromtheuserandpaddedDri-lex®shoulderandlegpadsforaddedoverallcomfort.

• Velcro®cheststrapthatmeetsANSIZ359.1requirements.• Buckingham’spatentedsplittongueQuickConnectBuckleswithleatherchafesonthelegstraps.

• Weblooporsteeldeedorsalattachment.• Springloadedfrictionbucklesforheightadjustment.• MadefromType13nylonwebbingwithsilverupperandblacklowersections.• MeetsapplicableANSIstandards.

This Buckfit FR is an ‘H’ style full body harness featuring:• Ameshshellthatisdesignedto“breathe”.• FRfoampaddedshoulderandlegpadsthataddtooverallcomfort.• TheBuckinghampatentedsplittongueQuickConnectBuckleswith leatherchafesonthechestandlegstraps.

• Steeldeeorwebloopdorsalattachment.• Springloadedfrictionbucklesforheightadjustment.• MadefromType13nylonwebbingwithsilverupperandblack lowersections.

• MeetsASTMF887andallapplicableANSIstandards.

This Buckfit [shown] is an ‘H’ style full body harness featuring:• ADri-lex®shellthatisdesignedtowickmoistureawayfromtheuserandpaddedDri-lex®shoulderandlegpadsforaddedoverallcomfort.

• Buckingham’spatentedsplittongueQuickConnectBuckleswith leatherchafesonthechestandlegstraps.

• Steeldeeorwebloopdorsalattachment.• Springloadedfrictionbucklesforheightadjustment.• MadefromType13nylonwebbingwithsilverupperandblack lowersections.

• MeetsapplicableANSIstandards.

This Buckfit FR [shown] is an ‘H’ style full body harness featuring:• AKevlar®meshshellthatisdesignedto“breathe”.• FRfoampaddedshoulderandlegpadsthataddtooverallcomfort.• Velcro®cheststrapthatmeetsANSIZ359.1requirements.• TheBuckinghampatentedsplittongueQuickConnectBuckleswithleatherchafesonthelegstraps.

• Weblooporsteeldeedorsalattachment.• Springloadedfrictionbucklesforheightadjustment.• MadefromType13nylonwebbingwithsilverupperandblacklowersections.• MeetsASTMF887andallapplicableANSIstandards.

Buckfit & Buckfit fR HaRnesses... continued

637G8C700V9-Web Dorsal Loop [shown]or 637G8C600V9-Steel Dorsal Dee

68D7G8C600V9-Steel Dorsal Dee [shown]or 68D7G8C700V9-Web Dorsal Loop

68D7G8C600K1-Steel Dorsal Dee [shown]or 68D7G8C700K1-Web Dorsal Loop

637G8C700K1-Web Dorsal Loop [shown]or 637G8C600K1-Steel Dorsal Dee


Harness & Body Belt ComBinationsBuckingham Harness and Body Belt combinations are ideal for individuals working in generation/sub stations or off ladders where both Fall Protection and Work Positioning are required. Any lineman’s body belt can be permanently attached to a harness by means of stitching or by web loops. If you want a belt that can be removed, Buckingham offers quick connect nylon clips attached to the harness that keeps the body belt in place.

6493640 Harness (non-standard) with 1997T2 Body Belt [harness & belt sold separately]

‘H’ style full body harness featuring:• Interlocking chest strap & leg strap buckles, all with leather chafes.• SteelDeedorsalattachment.• Standardfrictionbuckleforheightadjustment.• MadefromType13nylonwebbingwithorangeupperandblacklowersections.• MeetsallapplicableANSI,OSHA,&ASTMstandards.• OrderharnessbyaddingsizesuffixS,M,L,X,topartnumber;non-standardsizesavailableuponrequest.

Shownwitha1997T2lightweightsemi-floatbodybeltthatisattachedbythread-ing the belt through web loops on the harness and then securing quick connect nylonclipsresidentonthebelt.Thebeltfeaturesinclude:

• 4"[10.2cm]widepaddedbackpadformaximumsupport.• SpeciallydesignedworkpositioningDeeringstoeasetheattachmentofapositioningstrapbyrestrictingDeeringswing.• Leathertoolloops,toolpouchtabsandanaccessorysnapandringfortoolstorage.• Grommettonguebuckletofastenthewaistbelt.• BodybeltsareorderedbyDeesize18-30;non-standardsizesavailableuponrequest.• MeetsallapplicableASTMstandards.

6394710 Harness (non-standard) with 1993F Body Belt [harness & belt sold separately]

‘H’ style full body harness featuring:• Velcro®cheststrapthatmeetsANSIZ359.1requirements.• Grommetlegstraps.• Reinforcedwebloopdorsalattachmentusedtohalfhitchshockabsorbinglanyard.• Standardfrictionbuckleforheightadjustment.• MadefromType13nylonwebbingwithorangeupperandblacklowersections.• MeetsallapplicableANSI,OSHA,&ASTMstandards.• OrderharnessbyaddingsizesuffixS,M,L,X,topartnumber;non-standard sizesavailableuponrequest.

Shownwitha1993Flightweightfullfloatbodybelt[securedtotheharnesswith quickconnectnylonclipsresidentontheharness]featuring:

• 8"[20.3cm]widesuedelinedbackpadformaximumsupport.• SpeciallydesignedworkpositioningDeeringstoeasetheattachmentofapositioningstrapbyrestrictingDeeringswing.• Leathertoolloops,toolpouchtabs,accessorysnap&ring,andatapethongfortool&equipmentstorage.• Aneopreneimpregnatednylonbeltstraptosecurethewaistbelt.• BodybeltsareorderedbyDeesize18-30;non-standardsizesavailableuponrequest.• MeetsallapplicableASTMstandards.

61999 Combination Harness: 68D7G8C600V9 Harness (standard) with Drilex® Body Belt [belt sold together]

‘H’ style full body harness featuring:• ADri-lex®shellthatisdesignedtowickmoistureawayfromtheuserand paddedDri-lex®shoulderandlegpadsforaddedoverallcomfort.

• Buckingham’spatentedsplittongueQuickConnectBuckleswithleatherchafeson the chest and leg straps.

• Steeldeedorsalattachment.• Springloadedfrictionbucklesforheightadjustment.• MadefromType13nylonwebbingwithsilverupperandblacklowersections.• MeetsapplicableANSIstandards.

Shownwithalightweightbodybeltthatispermanentlyattachedtotheharness.Thebeltfeaturesinclude:

• Dri-lex®linedbeltdesignedtowickmoisturefromtheuser.• 4"[10.2cm.]widepaddedbackpadformaximumsupport.• Buckingham’spatentedsplittongueQuickConnectBuckletofastenthewaistbelt.• Steeldeeringonhipsforusewithapolestraporaworkpositioninglanyard.• ThiscombinationharnessisorderedinS,M,L&XL;non-standardsizesavailableuponrequest.• MeetsallapplicableASTMstandards.


The Ergovation® H-Style Harness Model 16906H1 (shown with optional batten seat model # 1368)TheErgovation®H-StyleHarnessaccommodatesdorsalfallarrest.ItalsohastheabilitytoaccommodateclimbersutilizingSingleRopeTechnique(SRT)toaccesstheir work vertically. This H-Style Harness is unmatched in comfort, durability and versatility and it’s features include:•¼”closedcellfoampaddingforimprovedcomfortandhygiene.•Padsthatarestitchedtotheharnesswebbingtopreventshiftingandimproveeasy donning of harness.•AluminumD-ringfordecreasedweightandincreasedcomfortwhilealoft.•Plasticquickconnectbucklestoanchorandkeepchestcamverticalandintension while ascending.•Y2frictionbucklesforquickandsecureadjustmentofwebbinginfrontandinback.•Velcrochestretentionstrapforquickandeasydonningofharness•Byutilizingtheharnesstheclimberisabletodecreasethestrainonthelowback region and disperse the weight of the harness, as well as the tools that the climber is using, throughout the entire upper body.

The Ergovation® Y-Style Harness Model 16906H2 (withSRTmodel#WES)TheErgovation®Y-StyleHarnessisauniqueharnesstailoredspecificallytousers that require either dorsal or sternal fall arrest attachment. It also has the abilitytoaccommodateindividualsutilizingSingleRopeTechnique(SRT)toac-cesstheirworkvertically.ThisY-StyleHarnessisunmatchedincomfort,durabil-ity, and versatility and it’s features include:•¼”closedcellfoampaddingforimprovedcomfortandhygiene.•Padsthatarestitchedtotheharnesswebbingtopreventshiftingandimproveeasy donning of harness.•AluminumD-ringfordecreasedweightandincreasedcomfortwhilealoft.•Y2frictionbucklesforquickandsecureadjustmentofwebbinginfrontandinback.•AoneofakindsnapretentionsystemtosecurechestascendertoY-StyleHar-ness.•Theonlyharnessthataccommodatesbothsternalanddorsalfallarrest,aswellasachestcamattachmentforSRTaccess.•Byutilizingtheharnesstheclimberisabletodecreasethestrainonthelowback region and disperse the weight of the harness, as well as the tools that the climber is using, throughout the entire upper body.

The Ergovation® Sigma Suspension SRT Attachment Model WES

[Shown Above on 16906H1 &16901H2]TheErgovation®SigmaSuspensionSRTattachmentisarevolutionarydesignthataccom-modates users that want a ventral attachment for vertical work. Once attached to the harness, theSRT’stwoloopsareusedtoanchorlifesupportconnectinglinks.TheSRTattachmentconsistsofa1.75”webbinglooptocreatetheattachmenttothewaistbeltandtwo1”adjust-

mentstrapsandbucklesthatattachtothelegstraps.Becausethe1”redstrapsadjustthepositionofauser’schestcam,andtheheightoftheSRTattachment,itcanbeadjustedtosupporttheclimber’slowerbackwhilekeepingtheclimber upright on the rope. This positioning increases vertical gain and maintains vertical efficiency.TheSRTattachmentoftheErgovation™harnesscanberiggedtwoways:forfulltimeusebyusersthatrequireaventral attachment all of the time or for part time use for users that only require a ventral attachment for a portion of their work.

NEW


HarnEss matrix*To order a harness to meet your specific needs, use the following procedure. Simply insert the digit noted to configure the harness you desire (note: harness always starts with a 6).

HARNESS MATRIX

350 lb.Rated

*Harnesses configured from the matrix are non-returnable.

**8C=QuickConnectBuckle


If prefix 'U' inserted universal fit. Only available with harness with upper body adjustment buckles.

X

6

CHESTSTRAPATTACHMENT

0 = Used only with harness type 3

HARNESSTYPE LEGSTRAPATTACHMENT

FALLARRESTATTACHMENT

5 = Permanently attached

5Q = Shock Absorber permanently attached

BODYBELTATTACHMENT

0 = None

1 = Outside Mount 1" Plastic Buckle

4Q = Body Belt permanently attached

SHOULDERPADS

0 = None

1 = Permanent

2=Replaceable

3=Replaceablewith 1" 4-ply nylon loop for Snaphook andVelcroloopto hold lanyard on shoulder(6JLV)

4 = Light Weight Permanent

5 = Light Weight Replaceable

OPTIONS

SEE NEXT PAGE(S)

3E=#3Dwithloopat cross on front of harness

4 = Interlocking Buckle

3=Velcro ChestStrap

4B = Interlocking Buckle black powder coated

3=Cross-overdesign w/perm. attach. chest strap located 3 3/4" above front 'X'. (Applicable only to chest strap attachment "0")

4 = Body Belt attached through means of loops attached to harness

7 = Friction Buckles on vertical shoulder straps (chest mount)

3B = #3 with loop at cross on front of harness

8D=QuickConnectBucklew/black belt chafes for vertical adjustment

3D=#3w/ocheststrap, with 1 3/4" nylon attach piece stitched across back shoulder straps directly below the chafe in back.

3A = #3 with black powder coated shoulder strap buckle

3S= #3B w/Quick ConnectBuckles

9 = Basic Harness with shoulder strap adjustment

**8C=QuickConnectBuckle

8 = Basic Harness- no shoulder strap adjustment

9A = Basic Harness, #9 with black powder coated shoulder strap hardware

7A = Friction Buckles on vertical shoulder straps (low mount)

4=Grommets

3A = Interlocking Buckle (black powder coated)

1 = Step-in leg straps - no buckles

3 = Interlocking Buckle

9 = Small Shoulder DeeRing

7 = Web Loop

6=DeeRing(1069)7G=Vertical

mounted spring loaded friction buckle


BuckingHam HarnEss matrix options

A3 =1½”dia.rappellingloops. Sewn to shldr strap at 20° angle & encased in yellow tube wear piece.

C1 = Leather cover for adjustment buckles with 2”Velcro.

E=1¾”dia.loop(1”4-plynylon) in hip area (left side only) to attach snap hook.


C4=1¾”orangewebcross piece to prevent fall arrest attachment from sliding down.

A=15”rappellingloop(seatsection)-1”yellowwebwithVelcroback.

G=18”extensionstrap (1”yellowweb)that terminateswith¾”dia. loop for carabiner.

C =18”extensionstrap (1”ylwweb)thatterminateswith a dee ring.

D1=24”extensionstrap (1”yellowweb)terminatingwith dee ring.

A2 =3”lengthrappellingloops on vertical shoulder straps.

A4 =“A”rappellingloopw/additionof3”wideelastickeeper.

F = Work positioning dee rings attached to harness by green web, which goes around the back & connects the two dee rings.

C2=18”extensionstrap (13/4”orangeweb)termi-nating with a small dee ring.

G3 =18”extensionstrap (1¾”orangeweb)withwearpiecearound3½”dia.loopforattachment of shock absorber.

G4 =18”extensionstrap (1¾”orangeweb)thatterm.w/a13/4”diameterloop encased in yellow wear piece.

G6 =18”extensionstrap (1¾”orangeweb)thatterm. w/ a small dee ring attachedina13/4”dia-meter loop en-cased in yel-low tube wear piece.

G1 =18”extensionstrap (1”ylwweb)w/aloop (approx.3”dia.)tohalfhitchon a shock absorber.


H1 =10”Reflectivestripsstitched to front & back shldrstraps&Velcrocheststrap.

H=Reflectivematerial(standard gray).

R = Harness manufactured with all polyester web material. NOTE: 2 material colors used (i.e.: red upper section and black lower section). R3=10,000lbs.nylon

T2 = Harness made w/o leg strap elastic bands & leatherchafesandwith2”plastic slide buckle.

V9=CoolMaxpaddedshell and leg pads (green with gray type 13 webbing)

N=2”dia.loopsin1”blwebstitched to both shldr straps 5”abovetheVelcroloopcheststrap adjustment buckles.


BuckingHam HarnEss matrix options

P =ShoulderDeeRing(forretrieval)

T9 = Harness manufactured without leather chafes behind hardware but with elastic bands.

T3 = Harness made w/o leg strapleatherchafe&with2”plastic slide buckle.

K1 = Kevlar mesh; meets ASTM F887 electric arc per-formance requirements.

N1 = chafe loop attached to left shldr strap & used to attach snap hook.

Z12 = 5 labels inside leather coverw/Velcrowrap(walletstyle).


Shock Absorbing Lanyards (ANSI Z359.1-2007)The Buckingham deceleration lanyards reduce the impact force of a 220 pound (100 Kg) steel mass to less than 900 pounds (318 Kg) in a six-foot (1.8 m) free fall. By contrast, in the same test, the arrest force of a rope lanyard is in the area of 2400 lbs. (1089 Kg) and 2800 lbs. (1270 Kg) for a web lanyard. Shock-absorbing lanyards are not intended for work positioning, suspension or retrieval. When 600 lbs. of force is exerted, the Buckingham shock absorbing lanyard starts to expand which may extend an additional 3 1/2 feet (1.1 m) before arresting the fall. Shock absorbing lanyards and full body harnesses that have been in a fall should be discarded and replaced with new equipment.

BuckingHam standard dEsign sHock aBsorBing lanyardsBuckingham Manufacturing offers four different styles of shock absorbing lanyards. Standard design shock absorbing lanyards are returnable and can be ordered in 4', 4 1/2' and 6' lengths. Buckingham Manufacturing also allows you to design a shock absorbing lanyard from our matrix, specifying connection options and lengths. We’ll manufacture the shock absorbing lanyard to accommodate your needs. Matrix designed shock absorbing lanyards are not considered standard design and therefore are not returnable.

Harness Dorsal Attachment

Maximum Lanyard Length

SteelDeeRing 6' (1.8 m)

Web Loop 6' (1.8 m)

18" Pigtail 4 1/2" (1.4 m)

24" Pigtail 4" (1.2 m)

nEVEr usE a locking snap Hook WitH a Full Body HarnEss dorsal WEB loop!

aErial BElts

3852Made of 1 3/4" (44mm) woven nylon sewn to a man-made synthetic material for wear. A 3" (76mm) wide soft woven pad is attached for added comfort. Features grommet holes at the billet end of strap for adjustment.

20225 1/2" PadThis aerial belt is designed to provide the user with maximum mobility because of the sliding dee ring. The 5 1/2" (140mm) pad and waist strap are both made of strong neoprene impregnated nylon. Waist strap has 9 adjustment holes.

For a single dee work positioning aerial belt a 2 ft lanyard is required.

Available in S, M, L & X

Personal Energy Absorber / Energy Absorbing Lanyard - 6 ft. FF (ANSI Z359.13-2009)The Buckingham Personal Energy Absorber/ Energy Absorbing Lanyard reduces the impact force of a 282 pound (128kg) steel mass to less than 900 pounds (4kN) in a six-foot (1.8m) free fall. Personal Energy Absorbers / Energy Absorbing Lan-yards are not intended for work positioning, suspension or retrieval. When 600 lbs. (2.7 kN) of force is exerted, the Bucking-ham Personal Energy Absorber / Energy Absorbing Lanyard starts to expand which may extend an additional 4 feet (1.2 m) before fully arresting the fall. Personal Energy Absorber / Energy Absorbing Lanyards and full body harness that have been in a fall should be discarded and replaced with new equipment.

Personal Energy Absorber / Energy Absorbing Lanyard - 12 ft FF (ANSI Z359.13-2009)The Buckingham Personal Energy Absorber / Energy Absorbing Lanyard reduces the impact force of a 282 pound (128 Kg) steel mass to less than 1,350 pounds (6 kN) in a twelve-foot (3.65 m) free fall. Personal Energy Absorbers / Energy Absorbing Lanyards are not intended for work positioning, suspension or retrieval. When 600 lbs. (2.7 kN) of force is exerted, the Buck-ingham Energy Absorber / Energy Absorbing Lanyard starts to expand which may extend an additional 5 feet (1.5 m) before fully arresting the fall. Personal Energy Absorber / Energy Absorbing Lanyards and full body harness that have been in a fall should be discarded and replaced with the new equipment.

- When using a full body harness with a steel dee ring dorsal attachment, only use a shock ab-sorbing lanyard with a locking snap hook or a locking carabiner connector.


The Buckyard Stretch offers the same benefits as the Buckyard with the addition of elastic Bungee. This feature reduces a 6' lanyard to approximately 44" greatly reducing trip hazards while climbing in and out of an aerial basket. The Buckyard Stretch is available in 4, 4 1/2 ft. and 6 ft. non-adjustable lengths.

When ordering an FR lanyard, add the 'S1' suffix to the model #; e.g.: 84V716S1.The +Z Suffix indicates the hardware meets ANSI Z359.12-2009. To order a lanyard with the 1706 locking snap hook drop the +Z suffix.


standard dEsign sHock aBsorBing lanyardsThe Buckyard has the flexibility of a standard web or rope lanyard with the benefit of a reduced arresting force. The tubular nylon exterior may expand 42" maximum while the interior material stretches to reduce the arresting force to less than 900 pounds. The Buckyard is available in 4, 4 1/2 ft. and 6 ft. non-adjustable lengths. When ordering an FR lanyard, add the 'S1' suffix to the model #; e.g.: 84V116S1.The +Z Suffix indicates the hardware meets ANSI Z359.12-2009. To order a lanyard with the 1706 (non 3600 lbs.)locking snap hook drop the +Z suffix.

FOR FULL BODY FOR FULL BODY HARNESS w/ STEEL HARNESS w/ WEB RING DORSAL LOOP DORSAL ATTACHMENT ATTACHMENT

Model Model Length8VV114+Z 84V114+Z 4feet(1.2m)8VV114.5+Z 84V114.5+Z 4.5feet(1.4m)8VV116+Z 84V116+Z 6feet(1.8m)

(e.g.:84V116+Z: 6' (1.8 m) length with loop on one end and locking snap hook with 3600 lb. gate load on the other for use on harnesses with a dorsal web loop.)

8VV116S1+Z 84V114+Z

84V714.5+Z8VV714.5+Z

FOR FULL BODY FOR FULL BODY HARNESS w/STEEL HARNESS w/WEB RING DORSAL LOOP DORSAL ATTACHMENT ATTACHMENT

Model Model Length8VV714+Z 84V714+Z 4 feet (1.2 m)8VV714.5+Z 84V714.5+Z 4.5 feet (1.4 m)8VV716+Z 84V716+Z 6 feet (1.8 m)

(e.g.:84V716+Z:6'(1.8m)lengthwithloopononeendandlocking snap hook with 3600 lb. gate load on the other for use on harnesses with a dorsal web loop.)

Indicates meetsANSI Z359.12-2009

To order Buckyards meeting ANSI Z359.13-2009 for a 6' free fall add optionX6.E.g.:8VV116X6. To also meet ASTM F887 add optionsS1X6.E.g.:8VV116S1X6.



Adjustable Length Woven Nylon with Locking Snap Hook on One End and Web Loop on the Other EndModel Length - - - -64V126+Z 6feet(1.8m)

Fixed Length Woven Nylon with Locking Snap Hook on One End and Web Loop on the Other EndModel Length64V114+Z 4feet(1.2m)64V114.5+Z 4.5feet(1.4m)64V116+Z 6feet(1.8m)

Adjustable Length Woven Nylon with Locking Snaps on Both EndsModel Length - - - -6VV126+Z 6feet(1.8m)

Fixed Length Woven Nylon with Locking Snaps on Both EndsModel Length6VV114+Z 4feet(1.2m)6VV114.5+Z 4.5feet(1.4m)6VV116+Z 6feet(1.8m)

For Full Body Harness w/Steel Ring Dorsal Attachment

Adjustable Length Woven Nylon with Locking Snaps on Both EndsModel Length - - - -5VV126+Z 6feet(1.8m)

Fixed Length Woven Nylon with Locking Snaps on Both EndsModel Length5VV114+Z 4feet(1.2m)5VV114.5+Z 4.5feet(1.4m)5VV116+Z 6feet(1.8m)

For Full Body Harness w/Steel Ring Dorsal Attachment

Fixed Length Woven Nylon with Locking Snap Hook on One End and Web Loop on the Other EndModel Length54V114+Z 4feet(1.2m)54V114.5+Z 4.5feet(1.4m)54V116+Z 6feet(1.8m)

Adjustable Length Woven Nylon with Locking Snap Hook on One End and Web Loop on the Other EndModel Length - - - -54V126+Z 6feet(1.8m)

6VV114+Z64V114+Z

5VV114+Z54V114+Z

6VV126+Z

5VV126+Z

5VV116S1+Z

The Buck Stop features a 6" shock pack covered by clear shrink tube making inspection easy. When ordering an FR lanyard, add the 'S1' suffix to the model #; e.g.: 54V116S1. The +Z Suffix indicates the hardware meets ANSI Z359.12-2009. To order a lanyard with the 1706 locking snap hook drop the +Z suffix.

standard dEsign sHock aBsorBing lanyardsThe Buck Arrest features a 16" shock pack covered by a water resistant nylon tube that reduces the bulkiness of the pack on the back. When ordering an FR Buck Arrest add the ‘S2’ suffix to the model #; eg: 64V114S2+Z. The +Z Suffix indicates the hardware meets ANSI Z359.12-2009. To order a lanyard with the 1706 locking snap hook drop the +Z suffix

For Full Body Harness w/Web Loop Dorsal Attachment

For Full Body Harness w/Web Loop Dorsal Attachment

Indicates meetsANSI Z359.12-2009

To order a Buck Arrest or Buck Stop meeting ANSI Z359.13-2009 for a 6' free fall add option X6.E.g.:6VV116X6or5VV116X6.Toalsomeet ASTM F887 add options S1X6 or S2X6. E.g.:6VV116S2X6or5VV116S1X6.

To order a Buck Arrest or Buck Stop meeting ANSI Z359.13-2009 for a 12' free fall add option X12. E.g.:6VV116X12or5VV116X12.ToalsomeetASTM F887 add options S1X12 or S2X12. E.g.:6VV116S2X12or5VV116S1X12.


A B C D E F (Hardware for both Ends Except Items with (*) for End #2 Only) x xDECELERATOR/WORK POSITIONING

MATRIx FOR BUCKINGhAM ShOCK ABSORBING/WORK POSITIONING LANyARDS

(Illustrated Model 64V126R)

5-BUCK STOP6-BUCK ARREST7-WORK POSITIONING LANYARD8-BUCK YARD

hARDWARE (END #1 ATTAChED TO USER)

0 = 3/4" eye forcarabiner

4 = StandardHalf-hitch loop

6 = 3" Nylon LoopDual Lanyards Only

+4 = 2 1/4" lockingladder snap 3035 or when used w/ option +Z, a 30351 w/ 3600lb gateload

+6 = Aluminum Body Locking Rope Snap

+7 = 1709 RopeSnap or when used w/ option +Z, a1712 w/ 3600lb gateload

+J = 2" offsetcarabiner*

8 = 1704 Swivelsnap

A = Aluminum Carabiner Self-Locking 5005SA

D = 5005, 3600 lb. Gate Steel Carabiner

hARDWARE (END #2 ATTAChED TO ANChOR)

L = 1705 Rope Snap or when used w/ option +Z, a17051 w/ 3600lb gateload

M = PermanentlyAttached

R = 2 1/2" LadderHook 3130 or when used w/ option +Z, a 31301 w/ 3600lb gateload

U = 5005SAE AutoLocking Captive EyeCarabiner

V = 1706 Snap or when used w/ option +Z, a 17061 w/ 3600lb gateload

Z = 1 3/4" LadderHook Model 3129*

+H = Model 30341Large LockingRebar Hook

+K = Model 1711Roto-Snap

+N = Model 1710 Aluminum LockingSnap

MATERIALWEB/ROPE

1 = 1" Yellowpolyester web; 5,6,7 Series Only

1 = 1 3/16" Green Nylon tube; 8 Series Only

3B = 5/8" Polyester3 Strand Rope

4 = 1/2" Multiline Rope (3 Strand)

4A = 5/8' Multiline Rope (3 Strand)

4B = 3/4" MultilineRope (3 Strand)

7 = Green Nylon Tube w/ elasticcore; 5,6 & 8Series Only

8A = 1/2" BlueStreak Rope

8G = 5/8" DoubleBraid Rope

FIxED ORADJUSTABLE

1 = Fixed

2 = Adjustable

OVERALL LENGTh

4 = 4'

4.5 = 4 1/2'

5 = 5'

6 = 6'

OPTIONS

D = Dual Lanyard

R = Rescue Loop

S1 = Shrink Tube Over Arc Flash Rated Label. Used on Arc Flash Approved Products.

S2 = Arc Flash Rated Cover for Buck Arrest

V = Velcro Sewn at Anchor End of Lanyard

W = Leather WearGuard

W5 = Clear PlasticTube Wear Guard

x6 = Meets ANSI-Z359.13-09 for 6' FF

x12 = Meets ANSI-Z359.13-09 for 12' FF

+Z = Hardwaremeets Z359.12-09(3600 lbs gate)

Indicates meets ANSI Z359.12-2009 standard.

1706 (Option V); Locking Rope Snap: 1" (25mm) eye, 15/16" opening, 6" (152mm) long. Rated to 5000 lbf. (22kn) or, when using suffix +Z in part number, Model 17061 Locking Rope Snap (shown on right) with a 3600 lb gate load

1706 17061

3130 31301

3130 (Option R); Large Locking Ladder Snap: 1" (25mm) eye (I.D.), 2.5" (63.5mm) opening, 9 3/4" (248mm) length, 1 lb. 8 oz. weight. Rated to 5000 lbf. (22kn) or when using suffix +Z in part number, Model 31301 Locking Ladder Snap (shown on right) with a 3600 lb gate load.

17121709

1709 (Option +7); Locking Rope Snap [1" (25mm) eye (I.D.), 3/4" (19mm) opening, 6 1/8" (156mm) length, 10.2 oz. (290gm) weight. Min. tensile strength 5000 lbs. (22kn)] or, when using suffix +Z in part number, model 17091 Locking Rope Snap with a 3600 lb gate load.

hardware Used with Shock Absorbing Lanyards (see following pages for carabiner options)

3129 (Option Z); Small Locking Ladder Snap: 1" (25mm) eye (I.D.), 1.750" (44.5mm) opening, 8 1/8" (206mm) length, 1 lb. 3 oz. weight. Rated to 5,000 pounds (22kn)

1710 (Option +N); Locking Aluminum Snap: .75" (19mm) eye (I.D.), .875" (22mm) opening, 5.375" (137mm) length. Rated to 7,200 pounds (32.7kn)

3035 (Option +4); Locking Ladder Snap: 1" (25mm) eye (I.D.), 2.25" (57mm) opening, 8.75" (222mm) length, 1 lb. 4 oz. weigh. Rated to 5000 lbf. (22kn) or, when using suffix +Z in part number, Model 30351 Locking Rope Snap with a 3600 lb gate load.

3035 30351

1708 (Option +6); Aluminum Body Locking Rope Snap hook: 7/8" (22mm) eye (I.D.), .718" (18mm) opening, 5 1/4" (133mm) length, 5.4 oz. (154gm) weight. Min. tensile strength 5600 lbs. (24kn)

30341 (Option +h); Large Locking Snap hook: 15/16" (24mm) eye (I.D.),3 11/32" (85mm) opening, 13" (330mm) length. Rated to 5000 lbs.

1711 (Option +K); Alloy Steel RotoSnap: .670" (17mm) gate opening, 5 3/16" (132mm) long, 11.2 oz. weight. Min. tensile strength 10,000 lbs. and min. gate/side load 5000 lbs

5005SAE (Option U); Auto Lock Aluminum Carabiner with eye: .71" (18mm) opening; 5 1/4" (133mm) length; Rated to 5620 lbs (25kn)

1705 (Option L) Locking Rope Snap [1" (25mm) eye (I.D.), .812" (20.6mm) opening (keeper to bill in open position), 5 1/2" (140mm) length, 9.6 oz weight. Rated to 5000 lbf. (22kn) or, when using suffix +Z in part number, Model 17051 Locking Rope Snap (not shown) with a 3600 lb gate load.

8K = 1/2" xTC 16 Strand Rope w/ Red Rope Warning Core

E - desired length

D C BFA


5008-83RV

5008-80+1V Retractable Lanyard For use in an aerial lift truck. Attaches directly to boom.

5008-103EV

BuckingHam rEtractaBlE lanyardsThe retractable lanyard automatically extends and retracts to allow user mobility. This unit utilizes an inertia-brake mechanism which locks when 5" of material pulls out per second to restrain the worker to a fall of less than 12". Meets all applicable ANSI standards.

Model 5008-83EVA - desired length

C B D

pErsonal Fall limitEr

(Hardware for both ends except when noted)

RETRACTABLEUNIT

5008 DCBA OPTIONAL

LENGTHINFEET SWIVEL CONNECTINGDEVICE FRAMEEND

CONNECTINGDEVICE- LANYARDEND

OPTIONS

8'

6'

10'

0 = None

3 = 5/16 Swivel w/ Bolt & Nut

0 = 1" dia. Integral loop with wear piece

+6=LockRopeSnap,alum. body - stamped

F = 1 3/4" ret. lanyard bracket (frame end only)

V=1706lockingsnapor when used with option +Z, a 17061 with 3600 lb gateload

Z = 3129 ladder hook 1 3/4"

+N = Attac carabiner 223516

Suffix +Z = Indicates hardware meets Z359.1 (3600 lbs gate)

A1-Rubberbootfor carabiner

K = Signifies Buck Stop pack only at-tached to lanyard end

6008

RETRACTABLEUNIT ConnectingDevice(webend)*ConnectingDevice(Swivelend)*SWIVELLENGTHINFEET

7' 4 = Swivel Built In D=P/N50051SteelCarabinerw/3600 lb. gate

+4 = 2 1/4" locking snap 3035 or when used w/ option +Z , a 30351 w/ 3600 lb. gateload+X=AluminumCarabinermeets

Z359.1 (3600 lbs. gate) D=P/N50051SteelCarabinerw/ 3600 lb. gate

V=1706snaporwhenusedw/option +Z, a 17061 w/ 3600 lb. gateload.

+X=AluminumCarabinermeets Z359.1 (3600 lbs gate)

+Z = All hardware on lanyard meets Z359-07 3600 lb gate load

* Load capacity = 310 lbs.

6008-74+X+4+Z

BuckLimiterBuilt In Swivel for Easier Movement

BuckLimiterModel 6008-74DV+Z

•AluminumAlloyConstructionInside&Out:boththe mechanism and housing made of corrosion resistant alloy.

•Tanglefreeswiveltopforaddedmobility.

•7'extensionforexpandedworkarea

•Dyneema®polymerfiber1"webbing-upto15xstrongerthansteel.Resistanttomoisture,abrasions,UVlightandchemicals.

•Abrakingsystemdesignedforsmoothconsistent operation to prevent "jerky" lock-ups.

•Nofactoryrecertificationrequired.

nEW


Carabiners

*WARNING: NOT INTENDED FOR HUMAN SUPPORT OR FALL PROTECTIONIndicates meets ANSI Z359.12-2009 standard.

5005M Screw Gate Steel Carabiner*Length – 4 1/2" (114mm)Opening – 1" (25mm)Breaking Strength – 11,240 lbs.

5005T Twist Lock Steel CarabinerLength – 4 1/4" (108mm)Opening – 1" (25mm)Breaking Strength – 8,992 lbs.

5005L1 Steel Twist Lock CarabinerLength – 9" (225mm)Opening – 2" (51mm)Breaking Strength – 9,220 lbs. (41kn)

5005K Steel Auto Lock CarabinerLength – 4 1/2" (113mm)Opening – 1" (25mm)Breaking Strength – 6,747 lbs. (30kn)

5555W1 Tri-Act CarabinerLength – 4 5/8" (115mm)Opening – 1" (25mm)Breaking Strength – 5,625 lbs. (25kn)

5555SA Ball Lock Aluminum Carabiner (Option +2)Length – 4.25" (108 mm)Opening – .826" (21 mm)Breaking Strength – 6,295 lbs. (28 kn.)

5555WSA William Ball Lock Aluminum CarabinerLength – 4 5/8" (115mm)Opening – 1" (25mm)Breaking Strength – 5,625 lbs. (25kn)

5555S1 AM'D Aluminum CarabinerLength – 4.25" (108 mm)Opening – .826" (21 mm)Breaking Strength – 6,295 lbs. (28 kn.)

1711 (Option +K); Alloy Steel RotoSnap:.670" (17mm) gate opening, 5 3/16" (132mm) long, 11.2 oz. weight. Min. tensile strength 10,000 lbs. and min. gate/side load 5000 lbs

5005SA (Option A) Auto Lock Aluminum CarabinerLength – 4 1/2" (114mm)Opening – 3/4" (19mm)Breaking Strength – 6700 lbf (30kn)

5005L2 Steel Twist Lock CarabinerLength – 7 1/8" [178mm]Opening – 1 1/8" [28mm]Breaking Strength – 10,120 lbs. (45kn)

5005 (Option D) Auto Lock Steel Carabiner w/ 3600 rated gate keeperLength – 5" (127mm), Opening – 1" (25mm) Breaking Strength.


toWEr & rEscuE HarnEssEs For stEEl structurE Fall protEctionOur standard design Tower&RescueHarnessesaredesignedtoaccommodatetheTowerWorkers’needforwork positioning, suspension, fall protection and retrieval for rescue. A body belt is added for comfort and to attach a work positioning strap, tools & pouches.

‘H’ style full body harness with built in body belt featuring:•Dri-lex®shellthatfitslikeavestandwicksmoisture

away from the user.•CanbemadeinKevlarmeshtomeetASTM5887Elec-tricArcPerformanceRequirements.Toorder61995K1.•Dri-lex®shoulderandlegpadstoaddtooverallcomfort.

Buckingham’s patent pending split tongue Quick ConnectBucklesonthechestandlegstraps.•SteelDeedorsalattachment.•Springloadedfrictionbucklesforheightadjustment.•FrontalchestDeeringadjustsupanddownindepen-

dently of the shoulder straps allowing the user to correctly position when using a ladder climb system.•PVCshoulderloopstostowlanyardhardwarewhen

not in use.•MadefromType13nylonwebbingwithsilverupper

and black lower sections.

tHE BuckingHam prEmiEr toWEr HarnEssModel 61995

S = Small; M = Medium; L = Large, X = Extra Large; XX = 2X; XXX = 3X.

HARNESS SIZING MATRIX CHEST SIZE

Order by adding Suffix S, M, L, XFit is important to comfort. Be sure to allow for wear over heavy clothing.

Typically Fit for A Size Person With Waist Size Small 28-32 Medium 32-36 Large 36-40 X-Large 40-44

HEIGHT 34-36 38-40 42-44 46-48 50-54 56-605' 4"- 5' 7" S S M L X XX

5' 8"- 5' 11" S M L X XX XXX

6' 0"- 6' 3" M M L X XX XXX

6' 3" + L L X X XX XXX

Body belt features include:• SpeciallydesignedworkpositioningDeeringstoeasetheattachmentofapositioningstrapbyrestricting Deeringswing.

• Leathertoolloopsandanaccessorysnapandringfortoolstorage.• Agrommettonguebuckletofastenthewaistbelt;anda5"[12.7cm]widebeltwiththickpaddingandbuiltin

stiffener for maximum comfort.

The modular suspension system can be entirely removed if desired and includes:• Arigidbattenseatwithpaddingformaximumcomfort(battencanberemovedforthosepreferringasoftseat).• ElasticretainerswithsnapfastenersonseatsectiontostowsuspensionDeeringsoutofthewaywhenclimbing.• MeetsallapplicableANSI&OSHAstandards.• OrderbyaddingsizesuffixS,M,L,X,topartnumber;non-standardsizesavailableuponrequest.


toWEr & rEscuE HarnEssEs

A‘Y’stylefullbodyharnesswithbuiltinbodybeltandfeaturing:• TheBuckingham’spatentpendingsplittongueQuickConnectBuckles:• onthelegstrapsforeaseofuse&attheumbilical&shoulderstrappositions

to work in conjunction with a back mounted friction buckle to adjust for height.• AsternumDeeringthatadjustsup&downindependentlyoftheshoulder

straps allowing the user to correctly position for rescue or when using a ladder climb system.

• SteelDeedorsalattachment.• Speciallydesignedbackchafes&roundedshoulderpadstopreventchafing

on neck.• Paddedindividuallegstrapsforsuperiormobilityandcomfort.• MadefromType13nylonwebbingwithorangeupperandblacklowersections.

61993

The light weight body belt features include:• Arigidbackpadformaximumsupport.• SpeciallydesignedworkpositioningDeeringstoeasetheattachmentofapositioningstrapbyrestrictingDeeringswing.• Leathertoolloops,toolpouchtabsandaccessoryloopsfortoolstorage.• Frictionbucklestosecurethebodybelt.• Afloatsystemthatallowstheusertopositionthebodybeltandharnessindependentlyformaximumcomfort.• MeetsallapplicableANSI&OSHAstandards.• OrderbyaddingsizesuffixS,M,L,X,topartnumber;non-standardsizesavailableuponrequest.

An ‘H’ style full body harness with built in full float body belt and featuring:• Interlockingcheststrapbuckle.• Standardfrictionbucklesforheightadjustment.• Interlockinglegstrapbuckles.• SteelDeedorsalattachment.• Noneremovableshoulderandlegpadsforaddedcomfort.• SteelDeeringsonshoulderstoaidinrescueandretrieval.• Reinforcedwebloopsatthechestthatcanbeusedforcontrolleddescent,

rescue or ladder climb system. • AnumbilicalDeeringidealforropeaccesswork.• MadefromType13nylonwebbingwithorangeupperandblacklowersections.

61990

Body belt features include:• SpeciallydesignedworkpositioningDeeringstoeasetheattachmentofapositioningstrapbyrestrictingDeeringswing.• Leathertoolloops,toolpouchtabsandanaccessorysnapandringfortoolstorage.• Frictionbucklestosecurethebodybeltand1"[2.54cm]adjustmentstrapsforproperbodybeltplacement.• MeetsallapplicableANSI&OSHAstandards.• OrderbyaddingsizesuffixS,M,L,X,topartnumber;non-standardsizesavailableuponrequest.

An ‘X’ style full body harness with built in body belt and featuring:• Interlockingtorsobucklesforheightadjustment.• Grommetlegstraps.• SteelDeeringfordorsalattachment.• Removablecushionedshoulderpadswithnylonloopstostowlanyardhardware

when not in use.• MadefromType13nylonwebbingwithorangeupperandblacklowersections.

603K469E3T9

Body belt features include:• SpeciallydesignedworkpositioningDeeringstoeasetheattachmentofapositioningstrapbyrestrictingDeeringswing.• Leathertoolloopsandanaccessorysnapandringfortoolstorage.• Elasticretainers,withsnapfasteners,ontheseatsectiontostowsuspensionDeeringswhenclimbing.• Agrommettonguebuckletofastenthewaistbeltanda5"[12.7cm]widebeltwiththickpaddingformaximumcomfort.• MeetsallapplicableANSI&OSHAstandards.• OrderbyaddingsizeS,M,L,X,topartnumber;non-standardsizesavailableuponrequest.


Work Positioning Lanyards & StrapsModel 9+N08K15A2M4 is a lightweight work positioning strap that features a micro adjuster for ease of use. A double

locking aluminum snap hook is used to keep the overall weight under 2 lbs. A protective sleeve is included to protect the rope from excessive wear. Overall length is 5’ [1.5m].

The Model 7VV7A13B+4 rebar assembly has polyester webbing and easy to use 1706 locking snaphooks. The locking rebar snap has a 2 1/4” gate opening.The 1” polyester webbing has a red warning center to indicate excessive wear or cuts, and is encased in a nylon tube to protect against abrasion (36” length). Please indicate desired length when ordering.

Dual, Specialty & tie Back Shock aBSorBing lanyarDSBuckingham Manufacturing offers a wide variety of dual and tie back shock absorbing lanyards for 100% fall protection while climbing and working on transmission towers, cell towers and steel structures.

Dual & Specialty Shock Absorbing Lanyards

8+66716D+J+6W4

546716RDR+Z

The Model 546716RDR+Z BuckStop Dual Lanyard features two 3130 Locking Ladder Snaps that have a 2 1/2" gate opening. Red rescue loops facilitate the rescue of an injured worker.The +Z Suffix indicates the hardware meets ANSI Z359.12-2009. To order a lanyard with the 3130 locking snap hook drop the +Z suffix.

The Model 64V7A26E+Z Tie Back Lanyard is designed to be wrapped around a 5,000 lb. anchor and connected back to itself via an adjustable dee ring. Should the user fall, the force is reduced with a built-in shock absorbing pack. The anchorage lanyard may be ordered in lengths greater than six feet to allow the user to wrap to the an-chor point and still have freedom of movement. A green nylon web tube is used to protect against abrasion. The +Z Suffix indicates the hardware meets ANSI Z359.12-2009. To order a lanyard with the 1706 locking snap hook drop the +Z suffix.

64V7A26E+Z

Model 8+66716D+J+6W4 is available with an aluminum double locking rope snap piggybacked with large auto locking carabiners so that users can tie off to step bolts.

8VB716R

The Model 8VB716R Buckyard Stretch Shock Absorbing Lanyard features a 3034 snap that has a 3 11/32" gate opening. This snap eliminates the need for a separate anchor sling.

Tie Back Shock Absorbing LanyardsThe Model 5V+K116+Z BuckStop Tie Back Shock Absorbing Lanyard features a 1711 roto-snap captive eye steel carabiner with a 5000 lb. rated gate making it safe and easy to 'tie back' to itself. One inch wide polyester web has a red warning center to alert the user of exces-sive wear.The +Z Suffix indicates the hardware meets ANSI Z359.12-2009. To order a lanyard with the 1706 locking snap hook drop the +Z suffix. 5V+K116+Z

Model 8+66716D+JW4 is a dual legged shock absorbing lanyard that weighs in at just 3 lbs. and features lightweight alumi-num hardware. The auto locking 2” offset gate and double locking aluminum snap help keep weight to a minimum. A stretch core automatically contracts lanyard length preventing it from becoming tangled when not in use and while climbing.

8+66716D+JW4

Model 7VV7A13B+4


ropE and caBlE graBs

Model 5004Stainlesssteel5/8”RopeGrabmoves freely up and down until a fall occurs. The downward pull will stop the fall by locking the CAMtotherope.

Model 5013ThisCableGrabisdesignedtoworkon3/8”cable.Should the user fall while ascending or descending, the cable grab will lock onto the cable preventing the user from falling more than one foot.Model 5012 for use on 5/16" cable.

Model 5004TThisRopeGrabismadetofit5/8”and3/4”rope.Thegrabismadeof high quality aluminum alloy with dual cams for better braking. This grab will move freely up and down until a fall occurs.

Model 5008-DDual Retractable Lanyard

The Buckingham dual retractable lanyard is made of two retractable lanyards, a shock absorbing pack, two steel carabiners, and two aluminum carabiners. The unit has an overall length of 17'. If a fall should occur, andtheshockabsorbingpackdeploys,the5008-Dcanextenduptoanadditional42".

Model 3032LEasy to use locking spreader snap.Overall Length - 9 3/4"EyeDiameter-1"Ratedto5000lbs.

Model 5004F5/8”RopeGrabmovesupanddown the rope with user until a fall happens, then it locks to the rope. This rope grab also has the added feature of a park brake, so the user can lock the grab above their head while working to minimize the fall distance.


Model 30

toWEr Fall protEction stEp Bolts and FlangEs

Without any one of the three components the fall protection system will not work. To fulfill a need to provide tower climbers the ability to stay continuously attached to the steelpoleorlatticetower,Buckingham,workingwithDukeEnergy,hasdevelopedamethod to do this easily and safely.

Model 3058

Step bolts with anchor:3058 - 5/8" diameter thread 3075 - 3/4" diameter thread Overall Length: 8 1/2"Tread Length: 5Thread Length: 2 1/4"5000lbs.Rated

Anchorage

The three mandatory components of fall protection are:

A - Suitable AnchorageB - Body SupportC - Connecting Device

Flange:BoltHoleDiameter30-F1 11/16"30-F2 15/16"30-F3 13/16"30-F4 1 1/16"

For new construction, insert a step bolt every third step. For existing towers, install flange under every third step. It only takes an additional three minutes per 100 feet to climb using this system.

Model 3075Model 30-F1 Use a dual lanyard to ascend and descend.


Model 5203 Buckingham Harness BeamThe answer to OSHA 1910.269 when training (unqualified) wood pole climbers.

• Full360°BallBearingrotationfortraditionalclimbertraining• Providesa5400lb.anchorpoint(OSHA29CFR1910.269)• Requiresnopoledrilling• Weighsapproximately160lbs.• Adjustabletofitoveramax.9.5"diameterpoletop*• 36"Armlength(Centerpoletoarmend)• Centerliftingeye• Limitsarrestingforcetolessthan900lbs.whenusedinconjunction

with a quality retractable lifeline and full body harness• Installationona45'class3poletakeslessthan10minutes• Eightboltstosecuretopole*To fit poles with a 12" diameter top order Model 5203-12.

Retractable LifelineModel 5201-50

Retractablelifelinesareidealforpersons susceptible to a slip or fall from elevated heights. Should the user fall, a centrifugal braking mecha-nism engages to limit the free fall to less than two feet (.6 m). The simple rules of fall protection requires a suitable anchor, a connection device such as a retractable lifeline and a full body harness. Shock absorbers should always be used to protect the user and reduce force appliedtotheanchorpoint.Ratedat350lbs.

BuckingHam rEtractaBlE liFElinE and ancHoragE dEVicEs

5203

Dual harness beam - two trainees are fall protected. *New Feature - Leveling footpads

Note: If Kevlar desired add suffix K example 5201-25K.If stainless desired add suffix S example 5201S-25.For steel stamped housing model add suffix 'SH' to the model

Model 5201-50

Model 5201-2525 ft. (7.6 m) of galvanized cable

Model 5201-5050 ft. (15.2 m) of galvanized cable

Model 5201-100100 ft. (30.4) of galvanized cable

Model 52032Model 52032

Model 5203


spEcialty products

Rescue Buck Model 694

RescueBuckisidealforpoletoprescuetraining, retrievaltrainingandfallprotectiontesting.Youcanfill rescue Buck with recycled tires to the desired weight. Height - 5' 6" (1.68 m)

694F1Buckmix rubber pellets: 55 lb. bag.

Model 5204

Fall protEction For tHE apprEnticE linE pErsonnElThe Buck TrainerThe Buck Trainer is a reliable apprentice fall protection 5000 lb. anchor that rotates 250°. It can be attached to any pole up to a 9" diameter at any height by a qualified climber and a groundman. This unit is ideal to transport to remote areas to field test potential apprentices before sending them to the actual training facility.

All parts included to secure to pole:• RatchetstraptoliftBuckTrainerwithhandline• Boltsandnuts• Mountingbrackets• CarabinertomountlifelineRetractableLifelinesoldseparately.

Benefits and specifications of the Buck Trainer:• Fitsapolewithdiameterupto9"• Mountsanywhereonpole• Rotates250°• Keepsclimber36"frompole• Testedto5000lbs.


spEcialty products

BuckEt truck & suspEnsion rEscuE systEms

106-50 Buck Self Rescue SystemProvides the means to safely and easily descend to the ground in the event of:

•Afallfromthebucket•Theneedtoevacuateaninoperablebucket

Victim suffers fall and hardhat is lost.

Pulls components from bag.

Attaches descender to rappelling loops on harness.

Steps up into ladder to slacken the shock absorbing lanyard.

Steps down on ladder until supported by descender and then removes feet from ladder.

Disconnects shock absorbing lanyard.

Descends safely to the ground.

idEal For tHE

'onE man' crEW

106-50

Thesystemcombinesaspeciallydesignedbagthat,whendeployed,releasesaladder[torelieve pressure],anascender,descenderand50'ofrope.Longerlengthsareavailableuponrequest.


To ascend the user climbs up the built-in steps.

Steps spaced 8" apart and stiffeners are built- in to ease inserting foot.

3813

Unit designed to stay on boom at all times.

3813D1

Boom strap with dee ring stays onboom.Rescueblocksarestored in a compartment of the line truck.

102SRA longer pack that mounts to the bucket truck boom.

Non-slip adhesive rubber to prevent slippage.

Ratchet Boom Strap Model 3809R(5000 lbs. rated) The ratchet boom strap provides a secure anchor on the bucket truck boom.

aFtEr Fall sElF-rEscuE systEm... 102sr, 102srs & 103sr

102SRSA short pack that connects to an anchor point and hangs freely.

The3813D1Q4-95isacombinationhurtman/highelevationselfresucesystem.This kit provides all the components needed to remove an injured co-worker from the bottom of an aerial basket and will also allow someone who is stranded in an aerial basket to safely and easily descend to the ground. Kit contains stainless steel blocks with a 5 to 1 lifting ratio, 95' of a 1/2" braided rope, boom strap with dee ring, descending device with built in anti-panic feature and retrofit rappelling straps. Locking snap hooks and carabiner feature ANSI 359 3600 lb. rated gates. Packed in a 6" diameter by 26" tall containment bag.

3813d1Q4-95nEW

tHE Hurt man BuckEt truck BaskEt rEmoVal 3813Should a fellow employee experience an accident where they fall to the bottom of the basket floor, removing them without a mechanical advantage can be near impossible. The 3813, with the stainless steel block and tackle provides a lifting ratio of 5 to 1 with 95' of double braid, 11 mm rope. Since harnesses are predominately used in bucket trucks, the ability to lift the victim higher is a must to clear the top of the basket. Buckingham has addressed this by a higher mount on the boom and a lower cord to deploy and activate the block and tackle system.

An employee working alone subjected to a fall from a bucket truck could be suspendedforhoursifnoassistanceisavailable.Withthe102SRor102SRS,the victim subjected to a fall can easily climb back into the basket, reducing the riskofsuspensiontrauma.Whenthepersonfalls,the102SRsystemsdeploysafifteen foot (15') webbed ladder allowing them to ascend back to the bucket and safety.The103SRhasa25'webbedladderallowingafallvictimtoeitherreturnto the bucket or descend to the ground.


Model 7003Rescuinganinjuredco-workerhasneverbeeneasier.TheDualRescueStrapfromBuckinghamenables the user to safely and easily rescue a co-worker from an elevated position using our 101SRSelf-RescueSystem.

Reinforcedloopused to attach descending device

Reinforcedeyeusedto attach to rescuer

Adjustable loop used to connect to victim

Friction buckle used to take slack out of loop to victim

tHE dual rEscuE strap modEl 7003

High Elevation Self-Rescue SystemShould there be a need to self-rescue or rescue someone else from an elevated height, such as an inoperable bucket truck, the new Buckingham101SRmakesiteasy.TheBuckingham101SRprovidesallthe components required to self-rescue or if the need arises to rescue a fellowemployee.The101SRdescenderwillautomaticallystoptheuseruntil the user compresses the handle allowing a smooth controlled descent. An additional built in (anti-panic) safety feature stops descent if the user compresses the handle too hard. This unit will allow the rescuer the advantage of lowering a hurt person with ease as well. The 101SRkitcomeswithretrofitrappellingstrapsthatcanbeaddedtoanexisting harness for self-rescue.

101SR-50 (50' 1/2" braided rope)101SR-75 (75' 1/2" braided rope)101SR-100 (100' 1/2" braided rope)4563 Bag only

Customlengthsavailableandpackedinabackpackropebag.

Model 101SR-50

Model 4469B1-150BackPackRopeBagmakescarryingthehighelevationsystemaloft easy. Padded shoulder straps and a chest strap to keep shoulder straps in place while climbing. Three outside mesh pocketswithVelcroclosures.Includesquickadjustfrictionbuck-les, elastic strap retainers, fairlead drawstring closure system, poly battens and a carry handle. Available in 120', 150',200, 225' and 300' models.

BuckEt truck & HigH ElEVation rEscuE systEms

For Bucket Truck Rescue and High Elevation Rescue Order Model 108-95.


HigH ElEVation rEscuE systEms

RescueFigure8strapsaredesignedtobegirthhitchedon a structure to aid in a rescue of an injured victim. The strap is 36" long and made from 1" yellow webbing. The Figure 8 is made from aluminum and can either be orderedwithout'ears'[model5009-36], orwithears[model5009E-36].

Model 5009E-36, with ears, to prevent rope from slipping down and knotting at the bottom of the Figure 8.

Model 4578 LeatherModel 4579 Canvas

TheRescuePouchisdesignedtostoreaknifeand a Figure 8 with strap in the front pocket. The main section of the pouch would be used to store tools and miscellaneous nuts and bolts.

Model 5009E-36 shown girth hitched on a structure.

Model 5009E-36 shown tied to a victim's shock absorbing lanyard.

Figure 8 Rescue Straps

Figure 8 Model 5009-36

Should a worker fall, the rescuer has everything they need to lower the victim to the ground safely. •TherescuerwouldrigthehandlinethroughtheFigure8alreadysecuredtothestructure[seephotobelow].•Therescuerwouldthenattachthehandlinetothevictim'sshockabsorbinglanyardloop.•Therescuerwouldthencuttheredrescueloopontheshockabsorbinglanyardandlowerthevictimtotheground.

rEscuE procEdurE


Model 7V-8G150+Z5/8" diameter 16 strand double braided rope vertical life line with a 17061 locking snap hook that meets ANSI Z359.1-07 3600 lb. gate requirements. This is a high strength, low stretch life line that is Samthane coated to resist wear.Model 7V-8G1100+Z: 100' Life Line

Model 3901 Temporary Anchor Rated to 5000 lb.A sling that allows user to make a half hitch around a secure anchor. Overall length is 72". (Available in any length; e.g. to order a 5' length use model number 3901-5).

VErtical liFE linEs and ancHor slings

Model 7V-4A150+Z5/8" diameter 3 strand vertical life line with a 17061 locking snap hook that meets ANSI Z359.1-07 3600 lb. gate requirements. A blended polyester/polyolefin rope is used to provide maximum life.Model 7V-4A1100+Z: 100' Life Line

Model 4888-40: Vertical Lifeline3/8" eye to eye wire sling, 5/8" metal thimble with a 40' spliced 5/8" Tenex rope with dual whipping twine, 80lbs. each, and a locked brummell splice.Available in different lengths.

Model 3902 Temporary Anchor Rated to 5000 lb.A sling that utilizes a small dee to pass through a larger dee making a secure anchor. Overall length is 72". (Available in any length; e.g. to order a 4' length use model number 3902-4).


rooF top Fall protEction systEms

rigging Blocks

Model 5007S & 5007LAluminumRiggingBlocksThese rigging blocks from Buckingham combine the convenience of a spring loaded upper pin with a captive bushing, and a lightweight aluminum design. Simply push and twist the upper pin, and the checkplates will swing open. And best of all, the bushing and pin can not fall out of the block. Stainless steel sheave and bushing pins., with an epoxy polyester coating over aluminum make up the construction of this high quality rigging block. Avail-able for 5/8" and 3/4" rigging lines.

Model 3111 is designed to fall protect individuals installing rooftopequipment.Rooftopfallprotectionisrequiredwhenworking on sloped roofs or within 10 feet of the edge of flat roofs. • Model U6393600: Full body harness. • BuckStop Model 5V+5113HDecelerationLanyard. • Model 7+K+K4A1100: 100' of 1/2" diameter multiline rope with 2 locking rope snaps on opposite ends. • Model 45400R2-18:Carrybag. • Model 16-16R-150: 16 oz. red throw bag with 150' of attached slickline. • Model 4560:Carrybagforthrowbagandslickline.

Model 3114The Fall Arrest Solution for roofers designed as a temporarily installed anchorage connector on wood frame structures with lifeline components including: • FullBodyHarness • ShockAbsorberattachedtoRopePositioner (compatible with 5/8" rope only) • 50'ofMultiline5/8"rope • RoofAnchor • Nails • CarryBag


Confined SpaCe RetRieval SyStemSWhen entering a confined space, a worker must be attached to an independent lifeline for adequate fall protection and retrieval. Buckingham's retrieval systems exceed all current OSHA and ANSI requirements. Read and follow the users manual enclosed with every system.

A complete retrieval system should consist of:1) A man rated winch to be attached

to personnel at all times during the de-scent and work below grade.

2) Tripod3) Full Body Harnesses (See Harness

Section)4) Work Winch to raise and lower

materials only.

Tripod, Man Rated Winch and Work Winch are purchased separately.

dURaBility

Model 50005007 Pulley and carabiner sold separately.



5003(Tripod)

50003-wayWinch

5010(PersonnelWinch)

COMPONENT OPTIONS

Above winches come in 50, 65 or 100 ft. lengths. Please designate length desired.Winches may be purchased with spectra rope (Kevlar) as lifeline by adding suffix "K" to model number.

Capabilities Model 5000 3 Way Winch

Model 5002 Work Winch

Model 5010 Personnel Winch

1) Arresting Yes No No

2) Retrieval Yes Yes-Materials Only Yes

3) Lowering Yes Yes-Materials Only Yes


Maximum Static Load 5400 pounds 5400 pounds

Maximum Work Load 350 pounds 350 pounds

Height With Legs 84" 108"

at Maximum Extension 84" 108" at Minimum Extension 48" 96"

DistanceBetweenFeet

at Maximum Extension 56" 68" at Minimum Extension 36" 45"

Upper Legs

Aluminum Extrusion 1 3/4" x 1 3/4" o.d. 1 3/4" x 1 3/4" o.d. Wall Thickness 1/8" 1/8"

Lower Legs

Aluminum Extrusion 1 1/2" x 1 1/2" o.d. 1 3/4" x 1 3/4" o.d. Wall Thickness 1/8" 1/8"

Adjustment Lengths 2 3/4" 2 3/4"

PermanentlyAttached GalvanizedSteel GalvanizedSteel Push Pin 3/8" dia. 3/8" dia.

Feet CastAluminum CastAluminum

6 1/2" x 3" W x 2" H 6 1/2" x 3" W x 2" H

RubberPad 51/4"x21/2"W 51/4"x21/2"W

Head CastAluminum CastAluminum

Forged Anchor Bolts 5/8" x 6" 5/8" x 6" Pre-drilled Leg Locks 3/8" x 4" 3/8" x 4"

LegChains 168" 192"

Weight 40 pounds 46 pounds

Maximum Working Load 350 Pounds (136 kg)

CableSpeedtoEngageBrake 4.5Ft./Sec.(1.4m/sec)

StoppingDistance <24"(220#Wt.-NoFreeFall) .6 m (100 kg)

Arresting Force 1200 Pounds (5.3 kn) (approx.)

GearRatio 5.5:1

RetrievalSpeed 20Ft./Min.(6m/sec)(approx.)

BrakeSystem FrictionDisk

CableLength 50,65or100ft.(15,20or30m)

Weight 50 ft. (15 m) - 32 lbs. (14.5 kg) 65 ft. (20 m) - 35 lbs. (15.9 kg) 100 ft. (30 m) - 50 lbs. (22.7 kg)

Housing Aluminum Alloy

RopeDrum AluminumAlloy

Shaft Stainless Steel

Mainspring Spring Steel

Brake Pawls Stainless Steel

BrakeCog StainlessSteel

Bearings Ball Bearings

BrakePad Composite

Cable GalvanizedSteel Stainless Steel KevlarRope

BUCKINGHAMWINCHES(MadeintheUSA)

Model 50039 9 Foot Tripod

Model 50037 Foot Tripod

Winches Specifications Model 5000

accEssoriEs

Tripod Specifications

Pulley Model 5007

Retrieval Yoke w/Two 36" (.9mm) LegsModel 72Uses two locking snaphooks, 1 3/4" (44.5 mm) nylon web and a 5000 lb. (22.2 kn) rated dee ring.

Model 50037BCarrybagfor7'Tripod

Model 50039BCarrybagfor9'Tripod

Model 5000BCarrybagforretrievalsystemwinch


modEl 80 conFinEd spacE rEtriEVal HarnEssTheConfinedSpaceRetrievalHarnessbyBuckinghamisdesigned to easily lift a hurt man out of a confined area. Simply place the harness under the victim just below the armpits, secure the velcro chest strap closures, pass the leg straps with cara-biners between the victim's legs and attach to leg strap loops, attach winch line hook to the retrieval loop, and lift to safety. The unique design of the retrieval harness supports the victim in an upright position making it easy to lift victim through man hole. One size fits all.

Model 81 Buck Diaper for RescueDesignedtobeusedforavictimthatneedstobeloweredfromahighelevation. TheBuckDiaperprovidesasecure,easymethodtotransportthevictim.

Model 81


non-Entry manHolE rEscuE systEmMaterial Lift with GuardThis unique system allows for a rescue to be accomplished without having to send ad-ditional personnel into the hazardous area. Two ways in which a rescue can be per-formed are:

SYSTEM A: Entrant suited with a full body harness (No. 63936Q) enters the confined space with a lifeline (39SAM13Q1) attached. The lifeline is attached to the manhole guard/rescue winch with a specially designed breakaway device. This device will release upon impact such as that of a vehicle which has entered the work zone and strikes the manhole guard. For rescue the attendant/rescuer attaches the ascender to the winch line and proceeds to raise the victim.

SYSTEM B: Entrant suited with a full body harness (No. 63936Q) enters the confined space without being tethered. For rescue the attendant/rescuer uses the rescue line system (39SAM13Q-30). The rescue line equipped with a carabiner is attached to a 16' telescopic pole via a special clip. The clip releases the carabiner once the rescuer locates one of four reflective rescue loops, "hooks" into a loop and pulls back on the pole. The rescue line is then tied on to the winch and the rescuer then proceeds to raise the victim. For a free on-site demonstration please contact us.

This rugged material lift is an excellent device for raising and lowering equipment and material into manholes. It clamps securely to the universal manhole guard, making it a safety fence as well as a valuable tool and rescue device.The entire unit is lightweight and portable, sets up quickly and has a 300 lb. capac-ity with a safety factor of three to one. The side pieces are constructed of high tensile, heavy-gauge aluminum with a durable yellow finish that stands up to rough weather andwear.Liftrope1/2”x30’DURA-PLEX™BraidedRope.

Model 63937Q5

39SAM13Q-30Rescuelinesystemincludedin 105Q2-30 and consisting of 2 each 30' lines with carabiners. Shown attached to a 16' telescopic pole.POLENOTINCLUDED

Features a dorsal web loop ring and easy access reflective loops at the shoulders, hips, pigtail and neck area.

Lifeline system included in 105Q1-30 and consisting of 30' line with locking snap hook, ascender, shackle, quick link, pin and storage bag.

Model 105Q1-30 Life Line Kit with a 42" Guard for use with 36" man holes.

Model 40

Model 39SAM13Q1

Carabiner w/ rope sold separately

Model 105Q1-30 Life Line Kit for System A. Includes: manhole guard, winch, 30' life line system and break away assembly.

Model 105Q2-30RescueKitforSystemB.Includes:manholeguard,winch,two30'rescuelinesystemsanda16'telescopicpole with quick release assembly.

Model 40 for Telescopic Pole Adapter Assembly

Order Harnesses separately.

For a free video demonstrating both systems, call Buckingham Customer Service at 1-800-937-2825.

Model


Ladders and rounded poles are a potentially dangerous combination. Buckingham offers a ladder safety solution that includes ladder safety straps enclosed in bags that are attached to your ladders. No more forgetting the safety straps in the vehicle or the garage. Straps are ready for deployment when the ladder goes up to prevent kickout and exces-sive rocking. The Buck Ladder Lock is designed for poles and trees.

The Buck Ladder Lock advantages include:• Bagsthatdonotinterferewiththeclimbingspaceofthetechnician’sfoot

or interfere with the storage of the ladder on the truck.• Highlyvisiblebrightlycoloredbagstoremindtechniciansthatprotection

is required.• Quickaccesstostraps.• Weatherresistantstoragebags.• Completesystemwithtopandbottombagsandstraps;355BT• Bottombagandstraps;355B• Topbagandstraps;355T

Buck laddEr lock systEm modEl 355Bt

tHE BuckstEp modEl 105rs suspEnsion trauma rEscuE systEmIs designed to alleviate the effects of orthostatic intolerance, also known as suspension trauma. Tests have proven that potentially fatal suspension trauma can occur within minutes of a fall. Since the typical rescue time is 15 minutes, the BuckStep allows a victim to immediately deploy a body support system that allows for improved blood circulation and the ability to move and flex muscles until rescue.

Compactandeasytomount,theBuckStepattachesto any brand full body harness and is fully adjustable for any sized user.

1.) Remove carabiner & strap from pouch

3.) Step into sling with both feet

BuckStep 105RS

2.) Attach carabiner to opposite side of harness

355T355B

Model 355BT, the Buck Ladder Lock Solution with both top and bottom storage bags & straps.

Model 355T, Orange Top Storage Bag & StrapsModel 355B,YellowBottomStorageBag&Straps


notEs

116

Buckingham Promotional Products

Shirt 1A long sleeved green shirt that features a larger Buckingham logo on back and a smaller logo on front. Also features Buckingham on the sleeve. Available in S, M, L, XL & 2X.

Shirt 2Green Buckingham T-shirt that features the big Buckingham logo on the back and a small logo on front. Available in S, M, L, XL & 2X.

Shirt 3 comes in green with a navy collar. Shirt 4 comes in white with a green collar. Both shirts feature the Buckingham logo on front. Available in S, M, L, XL & 2X.

Shirt 3

Shirt 4 Shirt 5A denim button up shirt that features the Buckingham logo on the front. Available in S, M, L, and XL.

117

Shirt 7 BuckMan long sleeved shirt. Features Climb Safe With Buck on back and the Buckingham logo on the front. Also features Buckingham on sleeve. Available in S, M, L, XL & 2X.

Shirt 6BuckMan short sleeved T-Shirt. Features Climb Safe With Buck on back and the Buckingham logo on front.Available in S, M, L, XL & 2X.

5555CT A green carhartt zip up jacket with two frontpockets. Features the Buckingham logo on the front. Available in S, M, L, XL & 2X.

1Green Buckingham hat that features the Buckingham logo on the front and Climber's Choice on the back. One size fits all.


1CNew camouflage hat that features the Bucking-ham logo on the front and Climber's choice on the back. One size fits all.

118

notEs

5296A black leather portfolio that features a pocket for business cards. Measures 10" x 12".

1231 & 1230Can be used for connectors, nuts and other small items. Also can be set on a desk or hung in a vehicle for other uses. Great for safety awards

5295-BLThe Buck satchel features a spring loaded closure and measures 10 1/2" diameter x 16" length. Comes in brown, burgundy and black.

5005NKA Non-lockingkey chain carabiner. Length 3", opening 5" and breaking strength is not rated. Not intended for human support.

4004A Buckingham key chain featuring the Buckingham logo.


12301231


INDEXSB9005A Climbers 10SB90059A Climbers 10SB9008A Climbers 10SB90089A Climbers 10SB9105A Climbers 10SB91059A Climbers 10SB9108A Climbers 10SB91089A Climbers 10SB9205A Climbers 10SB92059A Climbers 10SB9208A Climbers 10SB92089A Climbers 10SB9305 Climbers 12SB93059 Climbers 12SB9308 Climbers 12SB93089 Climbers 12SB9405A Climbers 10SB94059A Climbers 10SB9408A Climbers 10SB94089A Climbers 10SB9505 Climbers 12SB95059 Climbers 12SB9508 Climbers 12SB95089 Climbers 12Shirt1 Buckingham Long Sleeve Shirt 116 Shirt2 Buckingham Tee Shirt 116Shirt3 Green Polo Tee Shirt 116Shirt4 White Polo Tee Shirt 116 Shirt5 Denim Shirt 116Shirt6 BuckMan Tee Shirt 117Shirt7 BuckMan Long Sleeve Shirt 117TB8005 Climbers 9TB80059 Climbers 9TB8105 Climbers 9TB81059 Climbers 9TB8142R Climbers 11TB81429R Climbers 11TB8646 Climbers 9TB86469 Climbers 9TB8747 Climbers 9TB87479 Climbers 9TB9005A Climbers 9TB90059A Climbers 9TB90078 Climbers 9TB90079 Climbers 9TB9008A Climbers 9TB90089A Climbers 9TB9105A Climbers 9TB91059A Climbers 9TB91078 Climbers 9TB91079 Climbers 9TB9108A Climbers 9TB91089A Climbers 9TB91428R Climbers 11TB91429R Climbers 11TB9205A Climbers 9TB92059A Climbers 9T9206A Climber Gaff 6TB9208A Climbers 9TB92089A Climbers 9TB9305 Climbers 11TB93059 Climbers 11TB9306 Climber Gaff 6TB9308 Climbers 11TB93089 Climbers 11TB9405A Climbers 9TB94059A Climbers 9TB9408A Climbers 9TB94089A Climbers 9TB9505 Climbers 11TB95059 Climbers 11TB9508 Climbers 11TB95089 Climbers 11TB9646 Climbers 9TB96469 Climbers 9TB9847 Climbers 9TB98479 Climbers 9T9005A Climbers 9T90059A Climbers 9T9008A Climbers 9T90089A Climbers 9

T9105A Climbers 9T91059A Climbers 9T9106A Climber Gaff 6T9108A Climbers 9T91089A Climbers 9T9205A Climbers 9T92059A Climbers 9T9208A Climbers 9T92089A Climbers 9T9405A Climbers 9T94059A Climbers 9T9408A Climbers 9T94089A Climbers 9U64A23H6E00 ‘H’ Style Full Body Harness 80WES Ergovation Sigma Suspension 861 Buckingham Hat 1171C Buckingham Camo Hat 11710 Climber Shield 18101SR High Elevation Self-Rescue System 105101SR-50 High Elevation Self Rescue System 105101SR-75 High Elevation Self Rescue System 105101SR-100 High Elevation Self Rescue System 105102SR After Fall Self Rescue System 104102SRS After Fall Self Rescue System 104103SR After Fall Self Rescue System 104105Q1-30 Life Line Kit 112105Q2-30 Rescue Kit 112105RS Suspension Trauma Rescue System 113106-50 Buck Self Rescue System 10311T Replaceable Gaff Screws 6 11213 Tool Bucket 6411215 Tool Bucket 6311216 Tool Bucket 6311217 Tool Bucket 6311218 Tool Bucket 6311219 Tool Bucket 6411223 Tool Bucket 6411227 Tool Bucket 6311229 Tool Bucket 6411233 Tool Bucket 6411239 Tool Bucket 641213 Tool Bucket 641215 Tool Bucket 63121514 Tool Bucket 641215T3 Tool Bucket 631215Y Tool Bucket 631216 Tool Bucket 631216OS1H1L Oval Bucket 6612161 Oval Bucket 65121615CH1L Oval Bucket 6612161L Oval Bucket 6512161M2 Oval Bucket 6512162 Oval Bucket 651216241 Oval Bucket 6612163 Oval Bucket 65 12164 Oval Bucket 6512164L Oval Bucket 65121656 Oval Bucket 6512165H1 Oval Bucket 6512165L Oval Bucket 6512166 Oval Bucket 6512166L Oval Bucket 6512167 Oval Bucket 6612167H1 Oval Bucket 6612167L Oval Bucket 6612168 Oval Bucket 66 12168K Oval Bucket 6612168L Oval Bucket 6612169H1K Oval Bucket 6612169H1KL Oval Bucket 661216P Tool Bucket 631217 Tool Bucket 631218 Tool Bucket 631219 Tool Bucket 641220 Tool Bucket 641228S8 Tool Bucket 641230 Tool Bucket 63,118

1231 Tool Bucket 63,1181267 Reel Lift 461285 Electrician’s Belt 3513003 Belt Loop & Ring 29 130031 Belt Loop & Ring 2916906H1 Ergovation H Style Harness 8616906H2 Ergovation Y Style Harness 861705 Locking Rope Snap 9317051 Locking Rope Snap; 93 3600 lb gate1706 Locking Rope Snap 9317061 Locking Rope Snap; 3600 lb gate 931708 Locking Rope Snap 931709 Snap Hook 931710 Carabiner 931711 Roto-Snap 93, 951712 Locking Rope Snap; 3600 lb gate 931902 Body Belt 281958 Body Belt 281962M Body Belt 2619655M Body Belt 261988M Body Belt 261993F Body Belt 261994FR Body Belt 261997T2 Body Belt 282000EM Body Belt 242000M Body Belt 262100M Body Belt 2520002M Body Belt 2720003M Body Belt 2720005M Body Belt 2720006M Body Belt 2720007M Body Belt 24201 Leather Cleaner 292012M Body Belt 262013M Body Belt 262014M Body Belt 242015M Body Belt 24, 412017M Body Belt 252018M Body Belt 252019M Body Belt 25202 Leather Cleaner 292022 Aerial Belt 902103M Body Belt 262107M Body Belt 262134 Climber Straps 1921341 Climber Straps 192135 Climber Straps 1921351 Climber Straps 1921359 Climber Straps 19213591 Climber Straps 192139 Climber Straps 1921391 Climber Straps 192234 Climber Straps 192235 Climber Straps 1922359 Climber Straps 192239 Climber Straps 192401 Bucket Hook 572401-3 Bucket Hook 572402 Handline Carrier 292403 Bucket Hook 572405 Bucket Hook 572406 Handline Carrier 292407-80 Handline System 292434 Climber Straps 192435 Climber Straps 1924359 Climber Straps 192439 Climber Straps 1924399 Climber Straps 192444 Climber Straps 192445 Climber Straps 192449 Climber Straps 1926309 Climber Straps 192634 Climber Straps 19263432 Climber Straps 192635 Climber Straps 1926359 Climber Straps 192639 Climber Straps 1926399 Climber Straps 192644 Climber Straps 19

Cat. No. Description Pg. Cat. No. Description Pg. Cat. No. Description Pg.



2645 Climber Straps 192649 Climber Straps 19265 Reel Lift 4628344 Climber Straps 1928354 Climber Straps 1928359 Climber Straps 192839 Climber Straps 1928399 Climber Straps 192844 Climber Straps 1928454 Climber Straps 192849 Climber Straps 1929636M Body Belt 2730-F1 Flange 10030-F2 Flange 10030-F3 Flange 10030-F4 Flange 1003032L Locking Spreader Snap 9930341 Snap Hook 933035 Locking Ladder Snap 9330351 Locking Ladder Snap; 3600 lb gate 9330399 Climber Straps 19309C Tool Bucket 633049 Climber Straps 193058 Step Bolt 1003075 Step Bolt 100311 Tool Bucket 643111 Roof Top Fall Protection System 1083114 Roof Top Fall Protection System 108312C Tool Bucket 643118 Climber Pad 173119 Climber Pad 173120 Climber Pad 173122 Climber Pad 173124 Climber Pad 173125 Climber Pad 173126 Climber Pad 163127 Climber Pad 163128 Shank Pad 183129 Locking Ladder Snap 933130 Locking Ladder Snap 9331301 Locking Ladder Snap; 3600 lb gate 933201 Climber Pad 17341 Loop & Snap 29344277 Positioning Strap 39344299E Positioning Strap 39346077 Positioning Strap 39346099E Positioning Strap 39346677 Positioning Strap 39346699E Positioning Strap 39347077 Positioning Strap 39347099E Positioning Strap 39348077 Positioning Strap 39348099E Positioning Strap 393500 Velcro Pad 143500C Velcro Pad 143502 Velcro Pad 153502C Velcro Pad 153503 Velcro Pad 143503C Velcro Pad 1435032 Climber Pad 1635032KL Climber Pad 1635033 Footplate 1835034 Climber Pad 1635034KL Climber Pad 163504 Velcro Pad 153504C Velcro Pad 15355B Buck Ladder Lock System 113355BT Buck Ladder Lock System 113355T Buck Ladder Lock System 113364277 Positioning Strap 39364299E Positioning Strap 39366077 Positioning Strap 39366099E Positioning Strap 39366677 Positioning Strap 39366699E Positioning Strap 39367077 Positioning Strap 39367099E Positioning Strap 3938A Practice Pole Rescue System 41

38A-150 Practice Pole Rescue System 4138N99E Practice Pole Rescue System 413809R Ratchet Boom Strap 1043813 Hurt Man Bucket Truck Basket Removal 1043813D1 Hurt Man Bucket Truck Basket Removal 1043813D1Q4-95 Hurtman/High Elevation Self Self Rescue System 10438189E Positioning Strap Extension 39384277 Positioning Strap 39384299E Positioning Strap 393852 Aerial Belt 9038523 Aerial Belt 28386077 Positioning Strap 39386099E Positioning Strap 39386677 Positioning Strap 39386699E Positioning Strap 39387077 Positioning Strap 39387099E Positioning Strap 39388077 Positioning Strap 39388099E Positioning Strap 3939SAM13Q1 Life Line System 11239SAM13Q-30 Life Line System 1123901-5 Anchor Sling 1073901 Anchor Sling 1073902 Anchor Sling 1073902-4 Anchor Sling 10740 Telescopic Pole Adapter Assembly 1124004 Buckingham Key Chain 118400094 Light Replacement 754013 Scissor Pouch 344020 2 Pocket Holster 334023 3-Way Pouch 3340231-BR 3 Pocket Holster in Brown 334035Y Compression Tool Holder 7240351B3 Hydraulic Tool Storage Bag 724036B4 Greenlee & Fairmont Tool Holder 724036S Greenlee & Fairmont Tool Holder 724037 Compression Tool Holder 724040 Tool Apron 564041 Tool Apron 564042 Tool Apron 564044 Tool Apron 564045 Tool Apron 564048 Tool Apron 564051 Plier Pouch 33, 454074 Flashlight Holder 344076 Spray Can Holder 344079 Knife Sheath 334089 Knife Sheath 334126 5 Pocket Holster 3341333 Equipment Bag 6141333O1R5W1 Tool Bag 6141333R5SY Equipment Bag 614164 8 Pocket Holster 33418 Glove Bag 674191 7 Pocket Holster 344223 3 Pocket Holster 334226 4 Pocket Holster 3342266 Tool Pouch 3242266S-BR 5 Pocket Holster in Brown 324469B1-150 Equipment Bag 714469B1-150 Back Pack Rope Bag 1054500 Tool Apron 754500YM2 Tool Apron 5645003 Tool Apron 7545004 Tool Apron 7545006 Tool Apron 754500Y Tool Apron 564501 Tool Apron 754503 Tool Holder 774503B Tool Holder 774505 Tool Apron 754509 Tool Tray 744510 Tool Tray 744510M2 Tool Tray 7445100 Nut/Bolt Bag 584511 Tool Tray 74

4512 Tool Tray 744514 Chainsaw Scabbard 774514W Chainsaw Scabbard 7745141 Replacement Pocket 7745147Y Hotstick Bag 5545148 Hoist Bag 6845149 Hoist Bag 6845150 Line Hose Bag 55451509S1 Line Hose Bag 5545151 Line Hose Bag 5545152 Hot Stick Bag 5545153 Hot Stick Bag 5545154 Hot Stick Bag 5545155 Hot Stick Bag 5545156 Hot Stick Bag 5545157 Hot Stick Bag 5545158S1-44 Line Hose Bag 554522M Tool Holder 7745297 Utility Bag 6245299 Utility Bag 6245300C Tool Bag 60 45300C-24 Tool Bag 6045301R Handle Holder w/Ratchet 7645302 Replacement Clip 764530R Boom Tool Holder 76453112 Replacement Pocket/45311R 7645311R Tool Holder w/Ratchet 7645311RC Saw Holder w/Ratchet ext.base 7645312 Replacement Pocket/4531R 764531R Chainsaw Holder 76453212 Replacement Pocket/45321R 7645321R Saw Holder w/Ratchet 7645322 Replacement Pocket/4532R 764532R Pruner Holder 7645331Y Tool Bag 6045332 Tool Bag 6045333R5SY Tool Bag 6045333S Tool Bag 6045334 Tool Bag 6045400-12 Utility Bag 6245400-24 Utility Bag 6245400G1-12 Mesh Bag 7345400G1-18 Mesh Bag 7345400G1-24 Mesh Bag 7345400G1-30 Mesh Bag 7345400G1-9 Mesh Bag 7345400G1-18 Mesh Bag 7345400R2-18 Utility Bag 6245402R2-36 Duffel Bag 624540MB Mesh Bag 734545 Aerial Basket Cover 55 45455 Aerial Basket Cover 554545B3 Aerial Basket Cover 554545Y Aerial Basket Cover 554548 Aerial Basket Cover 554550 Fiberglass Step 7745500G1 Utility Bag 7345502 Fiberglass Bucket Step 77455200H1 Glove Bag 6745521 Bag 62455300 Glove Bag 67455400 Glove Bag 67455401 Glove Bag 674555 Battery Tool Holder 71455805 Glove Bag 67455805Y Glove Bag 67455895 Glove Bag 674558 Wheel Chock 464559 Wheel Chock 464560 Throw Line Bag 714560G1 Mesh Bag 734561G1 Mesh Bag 734563 Bag 1054569R2-120 Rope Bag 71 4569R2-150 Rope Bag 714569R2-225 Rope Bag 714569PR2-150 Rope Bag 714569PR2-225 Rope Bag 714570 Nut/Bolt Bag 584570B2 Nut/Bolt Bag 584570M2 Nut/Bolt Bag 5845701 Nut/Bolt Bag 58



45702C4S9 Nut/Bolt Bag 5845703C4S9 Nut/Bolt Bag 5845713 Nut/Bolt Bag 584573 Nut/Bolt Bag 584574 Nut/Bolt Bag 5845771 Nut/Bolt Bag 5945771-16 Nut/Bolt Bag 5945771S9 Nut/Bolt Bag 5945771S9-16 Nut/Bolt Bag 5945772 Nut/Bolt Bag 5945772-16 Nut/Bolt Bag 5945772S9 Nut/Bolt Bag 5945772S9-16 Nut/Bolt Bag 5945775 Tool Bag 714578 Leather Nut & Bolt Bag 354578 Lanyard Rescue Pouch 1064579 Lanyard Rescue Pouch 1064581 Ladder Bag 734585 Sleeve Roll Up 684587 Blanket Roll Up 684588 Blanket Bag 684589 Bucket Tool Holder 7645891 Bucket Tool Holder 7645911M2 Nut/Bolt Bag 584600D1Y Blood Stopper Pouch 694600NY Blood Stopper Pouch 694600S3Y Blood Stopper Pouch 694650 All Purpose Pouch 334659 9 Pocket Pouch 334812Y-8 Positioning Strap 3948127Y-6 Positioning Strap 3948127Y-66 Positioning Strap 3948127Y-7 Positioning Strap 3948127Y-8 Positioning Strap 3948129Y-6 Positioning Strap 3948129Y-66 Positioning Strap 3948129Y-7 Positioning Strap 3948129Y-8 Positioning Strap 39483A Practice Pole Rescue System 41483A-150 Practice Pole Rescue System 41483D Buck Squeeze 40483M Bucksqueeze for Hurt Man Rescue 41484T Bucksqueeze for Transmission Poles 40485 Buck Tooth 41487 BuckWheel 414888-100 Vertical Life Line 10749190 Holster 324923 Pouch 3249261 Tool Pouch 3249261S 4 Pocket Short Back Holster 324926-BR 4 Pocket Holster in Brown 32494277 Positioning Strap 39494299E Positioning Strap 394951-BL Holster 324958 Tool Bucket Swivel Snap 64496077 Positioning Strap 39496099E Positioning Strap 39496677 Positioning Strap 39496699E Positioning Strap 39497077 Positioning Strap 39497099E Positioning Strap 39498077 Positioning Strap 39498099E Positioning Strap 395VV114+Z Buck Stop 925VV114.5+Z Buck Stop 925VV116+Z Buck Stop 925VV116S1+Z Buck Stop 925VV126+Z Buck Stop 925V+K116+Z Tie Back Shock Absorbing Lanyard 985Y2-M Arm Protectors 695000B Utility Bag 62, 1105000 3 Way Winch 1095002 Work Winch 1095003 7FT Tripod 109,11050037B Carry Bag 11050037BY Tri-Pod Bag - 7’ 6250039 9FT Tripod 11050039B Tri-Pod Bag - 9’ 6250039B Carry Bag 110

5004 Rope Grab 995004B BuckGrab 415004F Rope Grab 995004T Rope Grab 9950051 Carabiner; 3600 lb. gate 955005K Carabiner 955005L1 Carabiner 955005L2 Carabiner 955005M Carabiner 955005NK Carabiner Key Chain 1185005SA Carabiner 955005SAE Carabiner 935005T Carabiner 935007 Pulley 1105007L Aluminum Rigging Blocks 1085007S Aluminum Rigging Blocks 1085008-D Dual Retractable Lanyard 995008-103EV Retractable Lanyard 945008-80+1V Retractable Lanyard 945008-83RV Retractable Lanyard 945008-83EV Retractable Lanyard 945009-36 Rescue Figure 8 1065009E-36 Rescue Figure 8 1065010 Personnel Winch 1095012 Cable Grab 995013 Cable Grab 99502 Jumper Bag 715032 Climber Pad 165032KL Climber Pad 165032S Climber Pad 165032SKL Climber Pad 165034 Bucket Hook 575041 Installer’s Pouch 335058 Bucket Hook 57506 Small Tool Bag 61506P7-14 Small Tool Bag 615081R3 Jumper Bag 715134 Bucket Hook 575175 Bucket Hook 57519 Glove Bag 675201-25 Retractable Lifeline 1015201-50 Retractable Lifeline 1015201-100 Retractable Lifeline 1015203 Harness Beam 1015203-12 Harness Beam 10152032 Dual Harness Beam 1015204 Buck Trainer 102521 Glove Bag 675231 Sleeve Bag 68526 Tower Beacon Carry Bag 715279 Carry All Belt 35528 Sleeve Bag 685288 Nut/Bolt Bag 585295-BL Buck Satchel 118 5296 Leather Portfolio 1185299 Leather Bolt Bag 3552993BR Leather Bolt Bag 3552993-BR Nut/Bolt Bag 5952994-BR Nut/Bolt Bag 595299-BR Nut/Bolt Bag 595302 Leather Bolt Bag 35, 595358 Bucket Hook 5754V114+Z Buck Stop 9254V114.5+Z Buck Stop 9254V116+Z Buck Stop 9254V116S1+Z Buck Stop 9254V126+Z Buck Stop 9254V126+Z Buck Stop 925434 Bucket Hook 57546716RDR+Z Dual Shock Absorbing Lanyard 985555CT Insulated Denim Jacket 1175555CT2 Non-Insulated Denim Jacket 1175555SA Carabiner 955555S1 Carabiner 955555WSA Carabiner 955555W1 Carabiner 95574 Staple Stick 47574L Staple Stick - Long 476VV114+Z Buck Arrest 926VV114.5+Z Buck Arrest 92

6VV116+Z Buck Arrest 926VV126+Z Buck Arrest 9260002 Strap With Ring 2960003 Strap With Ring 296008-74+X+4+Z Personal Fall Limiter 946008-74DV+Z Personal Fall Limiter 946009 Gaff Guard 1860091 Gaff Guard 1860092 Gaff Guard 1860093 Gaff Guard 1860094 Leather Gaff Guard 1860156C Pole Saw Scabbard 516016 Leather Saw Scabbard 516016C Rubberized Belting Saw Scabbard 516017 Leather Pruner 526017C Rubberized Belting Pruner Guard 526019 Leather Pruner Guard 526019C Rubberized Belting Pruner Guard 526020 Leather Chainsaw Scabbard 526020C Rubberized Belting Chainsaw Scabbard 4860212 Leather Chainsaw Scabbard 5060212C Rubberized Belting Chainsaw Scabbard 506022 Leather Chainsaw Scabbard 506022C Rubberized Belting Chainsaw Scabbard 506025 Pole Gaff Maintenance Kit 206025C CCA Pole Gaff Maintenance Kit 206027 Gaff Gauge Holder 206029 Leather Single Edge Axe Cover 526029C Rubberized Belting Single Edge Axe Cover 5260299 Leather Double Edge Axe Cover 5260299C Rubberized Belting Double Edge Axe Cover 52603B3600 ‘X’ Style Full Body Harness 81603B3700 ‘X’ Style Full Body Harness 81603E3600R3 ‘X’ Style Full Body Harness 81603E3700R3 ‘X’ Style Full Body Harness 81603K469E3T9 Tower and Rescue Harness 97603S8C600 ‘X’ Style Full Body Harness 82603S8C600K1 BuckFit FR 83603S8C600V9 BuckFit 83603S8C700 ‘X’ Style Full Body Harness 82603S8C700K1 BuckFit FR 83603S8C700V9 BuckFit 836030 Leather Single Edge Axe Cover 526030C Rubberized Belting Single Edge Axe Cover 526031 Leather Pruner Guard 526031C Rubberized Belting Pruner Guard 526058 File 206087 Sizing Belt 226102 Wrench Keeper 296103 Thread Restorer 476104 Wrench Holder 2961060 Thread Restorer 476107 Tape Thong 296109 Handline Carrier 296142 Manhole Cover Hook 466150 Strand & Wire Dispenser 4661501 36” Wire Dispenser 466160 Ground Rod Driver 4661990 Tower and Rescue Harness 9761993 Tower and Rescue Harness 9761995 Premier Tower Harness 9661999 Harness and Body Belt Combo 8562005 Leather Circular Saw Guard 5262005C Rubberized Belting Circular Saw Guard 526203 Thread Restorer 4762040 Thread Restorer 4762070 Thread Restorer 476208 Leather Saw Scabbard 516208C Rubberized Belting



Saw Scabbard 516212 Thread Restorer 476217 Leather Brush Axe Guard 526217C Rubberized Belting Brush Axe Guard 526222 Leather Saw Scabbard; Curved 516222C Rubberized Belting Saw Scabbard; Curved 506223 Leather Dual Saw Scabbard 506223C Rubberized Belting Dual Saw Scabbard 506225-21 21” Leather Bow Saw Blade Cover 486225-24 24” Leather Bow Saw Blade Cover 486225-30 30” Leather Bow Saw Blade Cover 486226 Leather Saw Scabbard; Curved 516226C Rubberized Belting Saw Scabbard; Curved 5162531 Belt Supporter 306256 Belt Supporter 306257 Belt Supporter 306258 Belt Supporter 3062583 Suspenders 306259 Belt Supporter 3062593 Belt Supporter 306272 Back Saver; Snap On 30628 Leather Pouch 346286 Telephone Installer’s Belt 356287 Miscellaneous Tool Belt 3562872 Carry Belt 356303 Pole Gaff Gauge 206303C CCA Pole Gaff Gauge 206306 Tree Gaff Gauge 20637G8C500CK1 BuckFit FR 83637G8C500CV9 BuckFit 83637G8C600K1 BuckFit FR 84637G8C600V9 BuckFit 84637G8C700K1 BuckFit FR 84637G8C700V9 BuckFit 846381700 ‘H’ Style Full Body Harness 806383600 ‘H’ Style Full Body Harness 816383700 ‘H’ Style Full Body Harness 816393500D1R3 ‘H’ Style Full Body Harness 8163936E00T2 ‘H’ Style Full Body Harness 806393600 ‘H’ Style Full Body Harness 816393700 ‘H’ Style Full Body Harness 8163937Q5 Full Body Harness 1126394600 ‘H’ Style Full Body Harness 826394710 Harness and Body Belt Combo 856398C600 ‘H’ Style Full Body Harness 826398C700 ‘H’ Style Full Body Harness 8264V114+Z Buck Arrest 9264V114.5+Z Buck Arrest 9264V116+Z Buck Arrest 9264V126+Z Buck Arrest 9264V7A26E+Z Tie Back Shock Absorbing Lanyard 986400 Staple Puller 476483600 ‘H’ Style Full Body Harness 816483700 ‘H’ Style Full Body Harness 816493500D1R3 ‘H’ Style Full Body Harness 816493600K Kevlar ‘H’ Style Full Body Harness 826493600R3 ‘H’ Style Full Body Harness 826493640 Harness and Body Belt Combo 856493700K Kevlar ‘H’ Style Full Body Harness 826493700R3 ‘H’ Style Full Body Harness 826494600 ‘H’ Style Full Body Harness 826501 Hone for Gaffs 206515 Leather Dual Saw/ Pruner Scabbard 516515C Rubberized Belting 516515CP Rubberized Belting Saw Scabbard; Curved 516515P Leather Saw Scabbard; Curved 4965156C Pole Saw Scabbard 5066 Burr & Barrell Nut Fastener Kit 32

68D7G8C600K1 BuckFit FR 8268D7G8C600V9 BuckFit 8468D7G8C700K1 BuckFit FR 8468D7G8C700V9 BuckFit 8468D98C600 ‘H’ Style Full Body Harness 8268D98C700 ‘H’ Style Full Body Harness 826909 Gaff Guard 186909U Gaff Guard 18694 Rescue Buck 69, 102694F1 Buck Mix Rubber Pellets 69, 1027VV7A13B+4 Work Positioning Lanyard 987V-4A150+Z Vertical Life Line 1077V-4A1100+Z Vertical Life Line 1077V-8G150+Z Vertical Life Line 1077V-8G1100+Z Vertical Life Line 1077002 Dual Rescue Strap 1057058 Leather Pouch 447058CK Pouch with Knife & Scissors 447058J Pouch with Knife & Scissors 447059 Knife/Scissor Pouch 447071 Goat Wrench 467075 Scissors 447080 Skinning Knife 4470801 Skinning Knife 4470802 Skinning Knife 4470803 Skinning Knife 4470804 Skinning Knife 447085 Scissors 447086 Skinning Knife 4470861 Skinning Knife 4470862 Skinning Knife 4470863 Skinning Knife 4470864 Skinning Knife 447088 Skinning Knife 447089 Skinning Knife 4470891 Skinning Knife 4470892 Skinning Knife 4470893 Skinning Knife 4470894 Skinning Knife 447090 Knife 4470901 Skinning Knife 4470902 Skinning Knife 4470903 Skinning Knife 4470904 Skinning Knife 447095 BuckSkinner Knife 4570951 Skinning Knife 4572 Retrieval Yoke 11077 Locking Snap Hook 388VB716R Specialty Shock Absorbing Lanyard 988VV114+Z Buckyard 898VV114.5+Z Buckyard 918VV116+Z Buckyard 918VV116S1+Z Buckyard 918VV714+Z Buckyard Stretch 918VV714.5+Z Buckyard Stretch 918VV716+Z Buckyard Stretch 918+66716D+JW4 Dual Shock Absorbing Lanyard 988+66716D+J+6W4 Dual Shock Absorbing Lanyard 9880 Confined Space Retrieval Harness 1118005 Climbers 1080059 Climbers 1081 Buck Diaper for Rescue 10981059 Climbers 108142R Climbers 1281429R Climbers 1284V114+Z Buckyard 9184V114.5+Z Buckyard 9184V116+Z Buckyard 9184V714+Z Buckyard Stretch 9184V714.5+Z Buckyard Stretch 9184V716+Z Buckyard Stretch 918451G7P5V Warning Flags & Markers 708451G7S Warning Flags & Markers 708452O3V Warning Flags & Markers 708453O1-45 Warning Flags & Markers 708453O1-50 Warning Flags & Markers 708454O3V Warning Flags & Markers 708455G7-45 Warning Flags & Markers 708455G7-50 Warning Flags & Markers 70

8747 Climbers 1087479 Climbers 109+N08K15A2M4 Work Positioning Lanyard 989-8 BuckAdjuster 4190078 Climbers 1090079 Climbers 109106 Climber Gaff 691078 Climbers 1091079 Climbers 1091428R Climbers 1291429R Climbers 129202 Long Climber Sleeves 209204 Regular Climber Sleeves 209206 Climber Gaff 69215 Climber Sleeve Fasteners 209218 Split Ring 20930 Leather Pouch 349306 Climber Gaff 6931 Leather Pouch 34945 LEA 5 Pocket Tool Holster 349847 Climbers 1098479 Climbers 1099E Locking Snap Hook 38996 Sleeve Fasteners 20

catalogo 01

Documents

fine emery

manual pruner

full floating

protective

entire upper

dorsal pigtail

vinyl coated

alloy steel