Casing & Tubing Running Services السعيديه ش. م. م Al Saidiya Trading LLC.

Casing & Tubing Running Services

Information Presentation

م . . م ش السعيديهAl Saidiya Trading LLC

Objective of Presentation

• To present Al Saidiya Trading LLC, capability of running all sizes and thread types (Non Premium & Premium) casing and tubing.

• To Initiate Premium Thread casing/Tubing running services of Al Saidiya Trading LLC.

AGENDA

Overview of Al Saidiya Treading LLC Service offerings for Casing & Tubing

Running ServicesMobile Backing FacilityCasing Fill up & Circulating ToolsNon-Premium Casing & Tubing running

servicesPremium Casing & Tubing running

services.

Summary

Who We Are?

Al Saidiya Trading LLC, is a 100 % Omani owned independent company and provider of oilfield services.

We operate to the highest international standards for Quality, Safety and Environment.

Established in 2013, we have built up a solid reputation as a dependable and reliable provider of quality Casing & Tubing Running services.

Company Details

Company Name: Al Saidiya Trading LLC

Activity: Casing &Tubing Running Services

Number of employees for contract:

Omanization percentage: 95%

Client: Petro Gas, Shaleem Petrolum, Abraj, Al Baraka, Shlumbergar, CCED, Petrotel, Dalma, Al Shawamikh, Occidental of Oman (OXY).

What Facilities We have for CTRS?

Premium thread service Facility To provide all the related tools and equipments including

JAM system to run all premium thread connections.

To provide experienced and professional torque/turn operators to perform premium thread connections casing/tubing running jobs.

Non-Premium thread service facility To provide comprehensive tools and equipments to run all

types of Non-premium thread connections from 30” to lowest size of OD.

To provide experienced and professional operators and stabbers to perform Non-premium thread connections casing/tubing running jobs.


Mobile Backing Facility To make up or break out shoe track equipment's and

accessories to casings

Sizes from 20” to 7”

Casing Fill up & Circulating Tools To fill up casing during casing running jobs

To circulate the fluid or mud in severe hole conditions in order to get the casing down to bottom without resistance.

Sizes from 13-3/8 – 7”.

Also 18-5/8 Packer available.


30” Casing Services Al Saidiya has all necessary handling tools to

RIH or POOH 30” OD casing along with Petol type Belt Tongs to make up or break out 30” casing thread connections.

Conventional Tubular Handling Tools Handling tools available for all sizes of tubular from

30” to 2 3/8” inclusive.

This also include Stabbing Guides and Klepo type thread protectors for premium (VAM threads) Tubular.


Hydraulic Power Tongs To make up / break out tubular thread connections. All types of threads – Premium and Non-premium Sizes of tubular from 20” to 2 3/8” including ODD sizes

of tubular. Torque range up to 50000 Ft-lbs.

Torque / Turn Monitoring Computer System To monitor, record and display premium thread

connections make up charts. Pertain the connection data or make up chart and

display to client as and when required. To control and protect the connection thread from over

torque and damage hence from leakage.

Scope of Work:

100% Non Premium Threads casing/tubing running service.

Premium Threads casing/tubing running service also provided to the client as and when client call for it.

Al Saidiya investment on equipment's and tools

The company has invested and still investing a huge fund to purchase equipment's and tools for the Casing and tubing running operation.

The company owns enough casing/tubing Running and handling tools as well as Torque/turn (JAM) computer system to perform 3 premium threads job at a time (with back up equipment's) beside all Non premium jobs which being currently performing.

Current stock of Al Saidiya Equipment's & Tools

EQUIPMENT QUANTITY REMARKS

CONNECTION TECHNOLOGY CT3000 TORQUE/TURN SYSTEM

4 UNITS USED TO MONITOR , CONTROL THE PREMIUM THREADS TORQUE/TURN CHARTS AND SAVE THE CONNECTION MAKE UP DATA TO RETREIVE FOR REFERENCE AT ANY TIME. CAN COVER 3 PREMIUM THREAD JOBS WITH BACK UP UNIT.



HYDRAULIC POWER UNITS

6+3 UNITS USED TO OPERATE POWER TONGS AND FMS, 3MORE UNITS ON ORDER WILL BE READY BY MIDDLE OF 2016, TOTAL WILL BE 10 UNITS

HYDRAULIC POWER TONGS 20K FARR CANAD

3 +1UNITS USED FOR LARGE OD CASINGS 20” & 18-5/8”, HOWEVER THEY HAVE JWAS AND DIES TO HANDLE SMALLER OD CASINGS DOWN TO 7”. 1MORE UNITS ON ORDER, TOTAL WILL BE 4 UNITS.



HYDRAULIC POWER TONGS KT13625 FARR CANAD

7+3 UNITS USED FOR CASING OD 13-3/8” TO 7”, HOWEVER THEY HAVE JWAS AND DIES TO HANDLE SMALLER OD CASINGS DOWN TO 4-1/2”. 3 UNITS ON ORDER WILL BE READY BY MIDDLE OF 2016, TOTAL WILL BE 10 UNITS

HYDRAULIC POWER TONGS KT8625 FARR CANAD

4+2 UNITS TONGS WITH HYDRAULIC ACTIVATED BACK UP, TO HANDLE CASING OD FROM 7-5/8” TO 2-7/8” OD TUBING.2 MORE ON ORDER WILL BE READY BY MIDDLE OF 2016. TOTAL WILL BE 6 UNITS.



HYDRAULIC POWER TONGS SL4500 FARR CANAD

2+4 UNITS TONGS WITH HYDRAULIC ACTIVATED BACK UP, TO HANDLE SMALL OD & LOW TORQUE TUBINGS FROM 4-1/2” TO 2-3/8”4 MORE ON ORDER WILL BE READY BY MIDDLE OF 2016. TOTAL WILL BE 6 UNITS.



CASING FILL UP & CIRCULATING TOOL (LAFLEUR)

4 UNITS2 TOOLS ARE PURLY FOR TOP DRIVE SYSTEM AND OTHER 4 TOOLS ARE CONVERTIBLE BETWEEN TOP DRIVE OR KELLY DRIVE. FOR CASING SIZES 13-3/8 TO 7”, WE ALSO HAVE SEALING PACKERS FOR 18-5/8” IF REQUIRED.

375 TON FMS 1+3 UNIT TO HANDLE CASING OD’S 13-3/8” TO 7”. 3 UNITS ON ORDER. TOTAL WILL BE 4

500 TON FMS 1 UNIT TO HANDLE CASING OD’S 13-3/8” TO 7”



500 TON AIR OPEARTED SPIDER SLIPS / ELEVATOR

2 SETS FOR HANDLING CASING OD SIZES FROM 13-3/8” TO 7”, CURRENTLY FOR 1 JOB WITH BACK UP

350 (20)TON AIR OPERATED SPIDER SLIPS/ ELEVATOR

1 SET FOR HANDLING LARGE OD CASING SIZES UP TO 18-5/8”, CURRENTLY FOR 1 JOB WITHOUT BACK UP.

350 TON AIR OPERATED SPIDER SLIPS/ ELEVATOR

2+2 SETS FOR HANDLING CASING OD SIZES FROM 13-3/8” TO 7”, CURRENTLY FOR 1 JOB WITH BACK UP. 2 SETS ON ORDER, TOTAL WILL BE 4 SETS.

Current stock of Al Saidiya Equipment’s & Tools


150 TON AIR OPERATED SPIDER SLIPS / ELEVATOR

1+! SET FOR HANDLING TUBING OD SIZES 5-1/2” TO 2-3/8”, CURRENTLY FOR 1 JOB WITHOUT BACK UP. 1 SET ON ORDER, TOTAL WILL BE 2 SETS

ELEVATOR BAILS OR LINKS

2 +2SETS FOR 500 / 350 TON ELEVATORS, FOR 2 JOBS WITH OUT BACK UP. 2 SETS ON ORDER, TOTAL WILL 4 SETS.



200 TON HYC SLIP TYPE ELEVATOR

1+3 SET COMPLETE WITH SLIPS INSERTS FOR HANDLING TUBING SIZES 3-1/2” TO 7”. 3SETS ON ORDER, TOTAL WILL 4

150 TON HYC SLIP TYPE ELEVATOR

2+2 SETS COMPLETE WITH SLIPS INSERTS FOR HANDLING TUBING SIZES 4” TO 5-1/2”. 2 SETS ON ORDER, TOTAL WILL BE 4.

125TON MYC SLIP TYPE ELEVATOR

2+2 SETS COMPLETE WITH SLIPS INSERTS FOR HANDLING TUBING SIZES 5” TO 7”. 2SETS ON ORDER, TOTAL WILL BE 4.

75 TON YC SLIP TYPE ELEVATOR

3 +1SETS COMPLETE WITH SLIPS INSERTS FOR HANDLING TUBING SIZES 2-3/8” TO 3-1/2”. 1SET ON ORDER, TOTAL WILL BE 4.

75 TON YC SLIP TYPE ELEVATOR

1 +3 SET COMPLETE WITH SLIPS INSERTS FOR HANDLING TUBING SIZES 3-1/2” TO 7”. 3SETS ON ORDER, TOTAL WILL BE 4.



80 TON AIR OPERATED SLIPS

3+3 SETS TO HANDLE TUBING SIZES FROM 2-3/8” TO 5-1/2”. 3 SETS ON ORDER, TOTAL WILL BE 6.

175 TON AIR OPERATED SLIPS

3+3 SETS TO HANDLE TUBING SIZES FROM 2-3/8” TO 7-5/8”. 3 SETS ON ORDER, TOTAL WILL BE 6.

Current stock Tools for handling 30” casing


37.5” CASING BUSHING

1 SET FITS NATIONAL ROTARY TABLE, FOR HANDLING, TO HANDLE 1 JOB WITHOUT BACK UP

150 TON SLX TYPE SIDE DOOR ELEVATOR

1 SET FOR 30” CASING, TO HANDLE 1 JOB WITHOUT BACK UP.

SINGLE JOINT ELEVATOR

2 SETS FOR 30” CASING TO HANDLE 1 JOB WITH BACK UP.

BULL TYPE BELT TONGS

1 SET TO MAKE OR BREAK OUT 30” CASING CONNECTIONS, TO HANDLE 1 JOB WITHOUT BACK UP.

ALSO OTHER HANDLING TOOLS LIKE SAFETY CLAMP AND HAND SLIPS ARE VAILABLE FOR 30” CASING.

Current stock Tools for handling 20” & 18-5/8”casing


37.5 SPLIT TYPE CASING BUSHING

2+2 SETS FIT NATIONAL ROTARY TABLE, TO HANDLE 18-5/8” AND 20’ CASINGS. 2 SETS ON ORDER, TOTAL WILL BE 4.

200 TON HINGED TYPE CASING BUSHING

2 SETS RESTS OVER THE ROTARY TABLE TO HANDLE 18-5/8” AND 20” CASINGS.

20” SLX TYPE SIDE DOOR ELEVATORS

5 SETS MIXTURE OF 150 TON AND 250 TON CAPACITY FOR HANDLING 20” CASINGS

18-5/8” SLX TYPE SIDE DOOR ELEVATORS

5 SETS MIXTURE OF 150 TON AND 250 TON CAPACITY FOR HANDLING 18-5/8” CASINGS

Current stock Tools for handling 20” &

18-5/8”casing


20” SINGLE JOINT ELEVATORS

5 TO HANDLE 20” CASING

18-5/8” SINGLE JOINT ELEVATORS

5 TO HANDLE 18-5/8” CASING

OTHER HANDLING TOOLS, LIKE HAND SLIPS AND SAFETY CLAMP SUFFECIENT TO HANDLE 2 JOBS AT THE SAME TIME OF EACH SIZE OF CASING.



250 TON SLX TYPE SIDE DOOR ELEVATOR

1+1 SET FOR 16” CASING, TO HANDLE 1 JOB WITHOUT BACK UP. 1 SET ON ORDER, TOTAL WILL BE 2.

SINGLE JOINT ELEVATOR

2 SETS FOR 16” CASING TO HANDLE 1 JOB WITH BACK UP.

ALSO OTHER HANDLING TOOLS LIKE SAFETY CLAMP AND HAND SLIPS ARE VAILABLE FOR 16” CASING.

Current stock Tools for handling 13-3/8”CASING


SIDE DOOR ELEVATOR, SLX TYPE

8 150 TON AND 250 TON CAPACITY, FOR 13-3/8” CASING. CAN HANDLE UP 4 JOBS WITH BACK UP.

SINGLE JOINT ELEVATORS

8 FOR 13-3/8” CASING. CAN HANDLE 4 JOBS WITH BACK UP.

OTHER HANDLING TOOLS, LIKE HAND SIPS, SAFETY CLAMPS, THREAD PROTECTORS AND STABBING GUIDES ARE ENOUGH FOR HANDLING FOR JOBS AT A TIME

Current stock Tools for handling 11-3/4”& 10-3/4”


11-3/4” SIDE DOOR ELEVATOR SLX TYPE

1 +1 150 TON CAPACITY, SIDE DOOR ELEVATOR. 1SET ON ORDER, TOTAL WILL BE 2.

11-3/4” SINGLE JOINT ELEVATOR

1+1 SINGLE JOINT ELEVATOR. 1SET ON ORDER, TOTAL WILL BE 2.

10-3/4” SIDE DOOR CAPACITY, SLX TYPE

2 150 TON & 250 TON SIDE DOOR ELEVATOR.


1+1 SINGLE JOINT ELEVATOR. 1SET ON ORDER, TOTAL WILL BE 2.

Current stock Tools for handling 9-7/8”casing


9-7/8” SIDE DOOR ELEVATOR, SLX TYPE

3+1 150 TON & 250 TON SIDE DOOR ELEVATORS, CAN HANDLE 3 JOBS WITHOUT BACK UP. 1SET ON ORDER, TOTAL WILL BE 4.


3+1 CAN HANDLE 3 JOBS WITHOUT BACK UP. 1SET ON ORDER, TOTAL WILL BE 4.

ALSO OTHER HANDLING TOOL, LIKE HAND SLIPS, SAFETY CLAMP STABBING GUIDE AND THREAD PROTECTOR ARE AVAILABLE TO HANDLE 3 JOBS WITHOUT BACK UP.




8 150 TON & 250 TON SIDE DOOR ELEVATORS, CAN HANDLE 4 JOBS WITH BACK UP


8 CAN HANDLE 4 JOBS WITH BACK UP.

ALSO OTHER HANDLING TOOL, LIKE HAND SLIPS, SAFETY CLAMP STABBING GUIDE AND THREAD PROTECTOR ARE AVAILABLE TO HANDLE 4 JOBS WITH BACK UP.




2+2 150 TON & 250 TON CAPACITY, CAN HANDLE 2 JOBS WITHOUT BACK UP. 2SETS ON ORDER, TOTAL WILL BE 4.


2+2 CAN HANDLE 2 JOBS WITHOUT BACK UP. 2SETS ON ORDER, TOTAL WILL BE 4.

ALSO OTHER HANDLING TOOL, LIKE HAND SLIPS, SAFETY CLAMP STABBING GUIDE AND THREAD PROTECTOR ARE AVAILABLE TO HANDLE 2 JOBS WITHOUT BACK UP.



7” SIDE DOOR ELEVATOR, SLX TYPE

4+2 150 TON & 250 TON CAPACITY, CAN HANDLE 2 JOBS WITH BACK UP. 2SETS ON ORDER, TOTAL WILL 6.

7” SINGLE JOINT ELEVATOR

6 CAN HANDLE 3 JOBS WITH BACK UP.

7” HAND SLIPS 4+2 CAN HANDLE 2 JOBS WITH BACK UP. 2SETS ON ORDER, TOTAL WILL BE 6.

ALSO OTHER HANDLING TOOL, LIKE SAFETY CLAMP STABBING GUIDE AND THREAD PROTECTOR ARE AVAILABLE TO HANDLE 2 JOBS WITH BACK UP.

Current stock Tools for handling 6-5/8” casing


6-5/8”SLX TYPE SIDE DOOR ELEVATOR

1+1 250 TON CAPACITY, CAN HANDLE 1JOB WITHOUT BACK UP. 1SET ON ORDER, TOTAL WILL BE 2.


2 CAN HANDLE 1 JOB WITH BACK UP

6-5/8” HAND SLIPS

2 CAN HANDLE 1 JOB WITH BACK UP

ALSO OTHER HANDLING TOOL, LIKE SAFETY CLAMP STABBING GUIDE AND THREAD PROTECTOR ARE AVAILABLE TO HANDLE 21 JOB WITH BACK UP.

Current stock Tools for handling 5-1/2” tubing


THOSE SIZES OF TUBINGS ARE NOT PART OF OUR SCOPE OF WORK IN THE CONTRACT, HOWEVER WE ARE STILL KEEPING SOME HANDLING TOOLS


2+2 TO HANDLE 1 JOB WITH BACK UP. 2SETS ON ORDER, TOTAL WILL BE 4.

5-1/2” SDML HANDSLIPS


OTHER HANDLING TOOLS LIKE SAFETY CLAMP, THREAD PROTECTOR AND STABBING GUID ALSO AVAILABLE TO HANDLE 1 JOB.

Current stock Tools for handling 5” tubing


THOSE SIZES OF TUBINGS ARE NOT PART OF OUR SCOPE OF WORK IN THE CONTRACT, HOWEVER WE ARE STILL KEEPING SOME HANDLING TOOLS

5” SINGLE JOINT ELEVATORS


5” SDML HANDSLIPS


OTHER HANDLING TOOLS LIKE SAFETY CLAMP, THREAD PROTECTOR AND STABBING GUID ALSO AVAILABLE TO HANDLE 1 JOB.



4-1/2” SLX TYPE SIDE DOOR ELEVATOR

1+3 100 TON CAPACITY, TO HANDLE 1 JOB. 3SETS ON ORDER, TOTAL WILL BE 4


6 TO HANDLE 3 JOBS WITH BACK UP


2+2 TO HANDLE 2 JOBS. 2SETS ON ORDER, TOTAL WILL BE 4.

OTHER HANDLING TOOLS LIKE SAFETY CLAMP, THREAD PROTECTOR AND STABBING GUID ALSO AVAILABLE TO HANDLE 3 JOBS.




1+3 100 TON CAPACITY, TO HANDLE 1 JOB. 3SETS ON ORDER, TOTAL WILL BE 4.













4 TO HANDLE 2 JOBS WITH BACK UP.










OTHER HANDLING TOOLS LIKE SAFETY CLAMP AND STABBING GUID ALSO AVAILABLE TO HANDLE 3 JOBS.

Current Al Saidiya personnel for premium thread running

services

Position QUANTITY REMARKS

TORQUE/TURN OPERATOR

6 QUALIFIED TO OPERATE CONTECH TORQUE/TURN COMPUTER SYSTEM AND PERFORM PREMIUM THREAD CONNECTIONS. CAN COVER 3 JOBS AT A TIME

TORQUE/TURN WORKSHOP TECHNICIAN

2 TRAINED AND QUALIFIED TECHNICIANS TO REPAIR, MAINTAIN AND CALIBRATE THE CT3000 SYSTEM

DETAILS OF VEHICLES USED FOR THE OPERATION

NO: OF VEHICLES

TYPE REMARKS

4 HEAVY FOR EQUIPMENT MOBILISATION AND DEMOBILIZATION.

6 LIGHT FOR CREW TRANSPORTATION FROM OUR BASE TO DIFFERENT WORK LOCATIONS.

Al Saidiya PERSONNEL

NO: OF JOBS CAN COVERED

EXPERIENCE TYPE OF TRAINING

NO,OF CREW

POSITION

3 JOBS 4-7 YEARS HSE,IFR,DHR,H2S,

6 JAM OPERATORS

6 JOBS 5-8 YEARS HSE,IFR,DHR,H2S,DDC

10 TONG OPERATORS

6 JOBS 5-7 YEARS HSE,IFR,DHR,H2S,DDC

10 STABBERS

QA/QC OF THE PREMIUM THREADS JOBS

AS PREMIUM THREADS ARE VERY CRITICAL, THUS IN AL SAIDIYA WE

CARRY OUT THE FOLLOWING STEPS TO MAKE A LEAK FREE

PREMIUM THREAD CONNECTION AND CASING OR TUBING STRING

INTGRITY:-

CONDUCT IN-HOUSE TRAINING FOR TORQUE/TURN OPERATORS ON HOW TO HANDLE

PREMIUM THREADS DURING RUNNING JOBS.

REGULAR BRIEFING TO THE CREW, BEFORE GOING OUT FOR ANY JOB.

USE THIRD PARTY TO CALIBRATE THE TORQUE GAUGES ON ANNUAL BASIS AND THE

TECHNICIANS CHECK THE CALIBRATION IN THE WORKSHOP BEFORE EACH JOB.

USE CONNECTION TECHNOLOGY CALIBARTION PROCEDURE TO CALIBRATE TORQUE/TURN

SYSTEM BEFORE EACH JOB.

ONE OF THE SENOIR PERSONNEL HAVE TO ATTEND ON EACH PREMIUM JOB ALONG WITH

CREW TO ENSURE THAT THEY FOLLOW THE PREMIUM THREAD CONNECTION HANDLING AND

RUNNING PROCEDURES AS WELL THE ACCEPTANCE CRITERIA OF THE EACH CONNECTION.

CONCLUSION

WITH CURRENT EQUIPMENTS AND HANDLING TOOLS AS WELL

AS TORQUE/TURN COMPUTER SYSTEM ANDTORQUE/TURN

OPERATORS, AL SAIDIYA CAN MANAGE TO HANDLE 3

PREMIUM THREAD CASING OR TUBING JOB AT A TIME.

AL SAIDIYA WILL BE ABLE TO DEVELOP ITS PREMIUM JOB

ACTIVITY TO 3 JOBS AT A TIME IF WE ARE GIVEN AN

OPPORTUNITY BY ANY COMPANY.

Office Locations

Al Saidiya Trading LLC Headoffice: Muscat

P.O.Box:1950, Post Code: 133

Al Khuwair, Muscat

Sultanate of Oman

Tel: +968 - 94221111

Office: +968 – 24478672

Email: [email protected]

[email protected]

Al Saidiya Trading LLC, Workshop & Yard Area: NIZWA (Interior of Oman)

Al Saidiya Operations: All Oman Concessions

mailto:[email protected]

mailto:[email protected]

SUMMARY

Full Service Casing & Tubing Running Service Company.

All types of PREMIUM & NON-PREMIUM jobs.

Experienced Omani Professionals

Countrywide Locations – Muscat, Nizwa.

Majority of Al Saidiya employees are Omani Nationals.

Al Saidiya is certified as ISO 14001:2008 Company

Thank You

www.al-saidiya.com

For any further information or clarification please do not hesitate to contact us at any time. We would be delighted to receive your call.

Casing & Tubing Running Services السعيديه ش. م. م Al Saidiya Trading LLC.

Documents

premium premium casing

casing thread connections

premium thread casingtubing

services casing tubing

tubular thread connections

od casing

servicespremium casing

thread types