Casing & Tubing Running Services - Al Saidiya · casing/tubing running jobs. Non-Premium thread service facility To provide comprehensive tools and equipments to run all types of

Casing & Tubing Running Services

م . م . السعيديه ش Al Saidiya Trading LLC

Objective of Presentation

• To present Al Saidiya Trading LLC, capability of

running all sizes and thread types (Non

Premium & Premium) casing and tubing.

• To Initiate Premium Thread casing/Tubing

running services of Al Saidiya Trading LLC.

AGENDA

Overview of Al Saidiya Treading LLC

Service offerings for Casing & Tubing Running

Services

Mobile Backing Facility

Casing Fill up & Circulating Tools

Non-Premium Casing & Tubing running

services

Premium Casing & Tubing running services.

Summary

Who We Are?

Al Saidiya Trading LLC, is a 100 % Omani owned

independent company and provider of oilfield services.

We operate to the highest international standards for

Quality, Safety and Environment.

Established in 2013, we have built up a solid reputation

as a dependable and reliable provider of quality Casing

& Tubing Running services.

Company Details

Company Name: Al Saidiya Trading LLC

Activity: Casing &Tubing Running Services

Number of employees for contract:

Omanization percentage: 95%

Client: Petro Gas, Shaleem Petrolum, Abraj, Al Baraka, Shlumbergar, CCED,

Petrotel, Dalma, Al Shawamikh, Occidental of Oman (OXY).

What Facilities We have for CTRS?

Premium thread service Facility

To provide all the related tools and equipments including JAM system to run all premium thread connections.

To provide experienced and professional torque/turn operators to perform premium thread connections casing/tubing running jobs.

Non-Premium thread service facility

To provide comprehensive tools and equipments to run all types of Non-premium thread connections from 30” to lowest size of OD.

To provide experienced and professional operators and stabbers to perform Non-premium thread connections casing/tubing running jobs.


Mobile Backing Facility

To make up or break out shoe track equipment's and accessories to casings

Sizes from 20” to 7”

Casing Fill up & Circulating Tools

To fill up casing during casing running jobs

To circulate the fluid or mud in severe hole conditions in order to get the casing down to bottom without resistance.

Sizes from 13-3/8 – 7”.

Also 18-5/8 Packer available.


30” Casing Services

Al Saidiya has all necessary handling tools to RIH or

POOH 30” OD casing along with Petol type Belt Tongs

to make up or break out 30” casing thread

connections.

Conventional Tubular Handling Tools

Handling tools available for all sizes of tubular from 30”

to 2 3/8” inclusive.

This also include Stabbing Guides and Klepo type thread

protectors for premium (VAM threads) Tubular.


Hydraulic Power Tongs

To make up / break out tubular thread connections.

All types of threads – Premium and Non-premium

Sizes of tubular from 20” to 2 3/8” including ODD sizes of tubular.

Torque range up to 50000 Ft-lbs.

Torque / Turn Monitoring Computer System

To monitor, record and display premium thread connections make up charts.

Pertain the connection data or make up chart and display to client as and when required.

To control and protect the connection thread from over torque and damage hence from leakage.

Scope of Work:

100% Non Premium Threads casing/tubing

running service.

Premium Threads casing/tubing

running service also provided to the client as

and when client call for it.

Al Saidiya investment on equipment's and tools

The company has invested and still investing a

huge fund to purchase equipment's and tools for

the Casing and tubing running operation.

The company owns enough casing/tubing

Running and handling tools as well as Torque/turn

(JAM) computer system to perform 3 premium

threads job at a time (with back up equipment's)

beside all Non premium jobs which being

currently performing.

Current stock of Al Saidiya Equipment's & Tools

EQUIPMENTQUANTITY REMARKS

CONNECTION

TECHNOLOGY

CT3000

TORQUE/

TURN SYSTEM

4 UNITS USED TO MONITOR , CONTROL THE

PREMIUM THREADS TORQUE/TURN CHARTS

AND SAVE THE CONNECTION MAKE UP DATA

TO RETREIVE FOR REFERENCE AT ANY TIME.

CAN COVER 3 PREMIUM THREAD JOBS WITH

BACK UP UNIT.

Current stock of Al Saidiya Equipment's & Tools


HYDRAULIC

POWER UNITS

6+3 UNITS USED TO OPERATE POWER TONGS AND FMS,

3MORE UNITS ON ORDER WILL BE READY BY

MIDDLE OF 2016, TOTAL WILL BE 10 UNITS

HYDRAULIC

POWER TONGS

20K FARR

CANAD

3 +1UNITS USED FOR LARGE OD CASINGS 20” & 18-

5/8”, HOWEVER THEY HAVE JWAS AND DIES

TO HANDLE SMALLER OD CASINGS DOWN TO

7”. 1MORE UNITS ON ORDER, TOTAL WILL

BE 4 UNITS.

Current stock of Al Saidiya Equipment's &

Tools


HYDRAULIC

POWER TONGS

KT13625 FARR

CANAD

7+3 UNITS USED FOR CASING OD 13-3/8” TO 7”,

HOWEVER THEY HAVE JWAS AND DIES TO

HANDLE SMALLER OD CASINGS DOWN TO 4-

1/2”. 3 UNITS ON ORDER WILL BE READY BY

MIDDLE OF 2016, TOTAL WILL BE 10 UNITS

HYDRAULIC

POWER TONGS

KT8625 FARR

CANAD

4+2 UNITS TONGS WITH HYDRAULIC ACTIVATED BACK

UP, TO HANDLE CASING OD FROM 7-5/8” TO

2-7/8” OD TUBING.

2 MORE ON ORDER WILL BE READY BY

MIDDLE OF 2016. TOTAL WILL BE 6 UNITS.

Current stock of Al Saidiya

Equipment's & Tools


HYDRAULIC

POWER TONGS

SL4500 FARR

CANAD

2+4 UNITS TONGS WITH HYDRAULIC ACTIVATED BACK

UP, TO HANDLE SMALL OD & LOW TORQUE

TUBINGS FROM 4-1/2” TO 2-3/8”

4 MORE ON ORDER WILL BE READY BY

MIDDLE OF 2016. TOTAL WILL BE 6 UNITS.


Equipment's & Tools


CASING FILL UP

& CIRCULATING

TOOL

(LAFLEUR)

4 UNITS

2 TOOLS ARE PURLY FOR TOP DRIVE SYSTEM

AND OTHER 4 TOOLS ARE CONVERTIBLE

BETWEEN TOP DRIVE OR KELLY DRIVE. FOR

CASING SIZES 13-3/8 TO 7”, WE ALSO HAVE

SEALING PACKERS FOR 18-5/8” IF

REQUIRED.

375 TON FMS 1+3 UNIT TO HANDLE CASING OD’S

13-3/8” TO 7”. 3 UNITS ON ORDER. TOTAL

WILL BE 4

500 TON FMS 1 UNIT TO HANDLE CASING OD’S

13-3/8” TO 7”


Equipment's & Tools


500 TON AIR

OPEARTED SPIDER

SLIPS / ELEVATOR

2 SETS FOR HANDLING CASING OD SIZES FROM

13-3/8” TO 7”, CURRENTLY FOR 1 JOB

WITH BACK UP

350 (20)TON AIR

OPERATED SPIDER

SLIPS/ ELEVATOR

1 SET FOR HANDLING LARGE OD CASING SIZES UP

TO 18-5/8”, CURRENTLY FOR 1 JOB

WITHOUT BACK UP.

350 TON AIR

OPERATED SPIDER

SLIPS/ ELEVATOR

2+2 SETS FOR HANDLING CASING OD SIZES FROM

13-3/8” TO 7”, CURRENTLY FOR 1 JOB

WITH BACK UP. 2 SETS ON ORDER, TOTAL

WILL BE 4 SETS.


Equipment’s & Tools


150 TON AIR

OPERATED SPIDER

SLIPS / ELEVATOR

1+! SET FOR HANDLING TUBING OD SIZES

5-1/2” TO 2-3/8”, CURRENTLY FOR 1 JOB

WITHOUT BACK UP. 1 SET ON ORDER, TOTAL

WILL BE 2 SETS

ELEVATOR BAILS

OR LINKS

2 +2SETS FOR 500 / 350 TON ELEVATORS,

FOR 2 JOBS WITH OUT BACK UP. 2 SETS ON

ORDER, TOTAL WILL 4 SETS.

Current stock of Al Saidiya Equipment’s

& Tools


200 TON HYC SLIP TYPE

ELEVATOR

1+3 SET COMPLETE WITH SLIPS INSERTS FOR HANDLING TUBING SIZES

3-1/2” TO 7”. 3SETS ON ORDER, TOTAL WILL 4

150 TON HYC SLIP TYPE

ELEVATOR

2+2 SETS COMPLETE WITH SLIPS INSERTS FOR HANDLING TUBING SIZES

4” TO 5-1/2”. 2 SETS ON ORDER, TOTAL WILL BE 4.

125TON MYC SLIP TYPE

ELEVATOR

2+2 SETS COMPLETE WITH SLIPS INSERTS FOR HANDLING TUBING SIZES

5” TO 7”. 2SETS ON ORDER, TOTAL WILL BE 4.

75 TON YC SLIP TYPE

ELEVATOR

3 +1SETS COMPLETE WITH SLIPS INSERTS FOR HANDLING TUBING SIZES

2-3/8” TO 3-1/2”. 1SET ON ORDER, TOTAL WILL BE 4.

75 TON YC SLIP TYPE

ELEVATOR

1 +3 SET COMPLETE WITH SLIPS INSERTS FOR HANDLING TUBING SIZES

3-1/2” TO 7”. 3SETS ON ORDER, TOTAL WILL BE 4.

Current stock of Al Saidiya Equipment’s

& Tools


80 TON AIR

OPERATED SLIPS

3+3 SETS TO HANDLE TUBING SIZES FROM

2-3/8” TO 5-1/2”. 3 SETS ON ORDER, TOTAL

WILL BE 6.

175 TON AIR

OPERATED SLIPS

3+3 SETS TO HANDLE TUBING SIZES FROM

2-3/8” TO 7-5/8”. 3 SETS ON ORDER, TOTAL WILL

BE 6.

Current stock Tools for handling 30”

casing


37.5” CASING

BUSHING

1 SET FITS NATIONAL ROTARY TABLE, FOR HANDLING, TO

HANDLE 1 JOB WITHOUT BACK UP

150 TON SLX TYPE

SIDE DOOR ELEVATOR

1 SET FOR 30” CASING, TO HANDLE 1 JOB WITHOUT BACK

UP.

SINGLE JOINT

ELEVATOR

2 SETS FOR 30” CASING TO HANDLE 1 JOB WITH BACK UP.

BULL TYPE BELT

TONGS

1 SET TO MAKE OR BREAK OUT 30” CASING CONNECTIONS,

TO HANDLE 1 JOB WITHOUT BACK UP.

ALSO OTHER HANDLING TOOLS LIKE SAFETY CLAMP AND HAND SLIPS ARE VAILABLE FOR 30”

CASING.


& 18-5/8”casing


37.5 SPLIT TYPE

CASING BUSHING

2+2 SETS FIT NATIONAL ROTARY TABLE, TO HANDLE

18-5/8” AND 20’ CASINGS.

2 SETS ON ORDER, TOTAL WILL BE 4.

200 TON HINGED

TYPE CASING

BUSHING

2 SETS RESTS OVER THE ROTARY TABLE TO HANDLE

18-5/8” AND 20” CASINGS.

20” SLX TYPE

SIDE DOOR

ELEVATORS

5 SETS MIXTURE OF 150 TON AND 250 TON

CAPACITY FOR HANDLING 20” CASINGS

18-5/8” SLX TYPE

SIDE DOOR

ELEVATORS

5 SETS MIXTURE OF 150 TON AND 250 TON

CAPACITY FOR HANDLING 18-5/8” CASINGS

Current stock Tools for handling 20” &

18-5/8”casing


20” SINGLE JOINT

ELEVATORS

5 TO HANDLE 20” CASING

18-5/8” SINGLE

JOINT ELEVATORS

5 TO HANDLE 18-5/8” CASING

OTHER HANDLING TOOLS, LIKE HAND SLIPS AND SAFETY CLAMP SUFFECIENT

TO HANDLE 2 JOBS AT THE SAME TIME OF EACH SIZE OF CASING.


casing


250 TON SLX

TYPE SIDE DOOR

ELEVATOR

1+1 SET FOR 16” CASING, TO HANDLE 1 JOB

WITHOUT BACK UP. 1 SET ON ORDER, TOTAL

WILL BE 2.

SINGLE JOINT

ELEVATOR

2 SETS FOR 16” CASING TO HANDLE 1 JOB WITH

BACK UP.

ALSO OTHER HANDLING TOOLS LIKE SAFETY CLAMP AND HAND SLIPS ARE

VAILABLE FOR 16” CASING.

Current stock Tools for handling 13-

3/8”CASING


SIDE DOOR

ELEVATOR, SLX

TYPE

8 150 TON AND 250 TON CAPACITY, FOR 13-

3/8” CASING. CAN HANDLE UP 4 JOBS WITH

BACK UP.

SINGLE JOINT

ELEVATORS

8 FOR 13-3/8” CASING. CAN HANDLE 4 JOBS

WITH BACK UP.

OTHER HANDLING TOOLS, LIKE HAND SIPS, SAFETY CLAMPS, THREAD

PROTECTORS AND STABBING GUIDES ARE ENOUGH FOR HANDLING FOR JOBS

AT A TIME


3/4”& 10-3/4”


11-3/4” SIDE

DOOR ELEVATOR

SLX TYPE

1 +1 150 TON CAPACITY, SIDE DOOR ELEVATOR.

1SET ON ORDER, TOTAL WILL BE 2.

11-3/4” SINGLE

JOINT ELEVATOR

1+1 SINGLE JOINT ELEVATOR. 1SET ON ORDER,

TOTAL WILL BE 2.

10-3/4” SIDE

DOOR CAPACITY,

SLX TYPE

2 150 TON & 250 TON SIDE DOOR ELEVATOR.

10-3/4” SINGLE

JOINT ELEVATOR

1+1 SINGLE JOINT ELEVATOR. 1SET ON ORDER,

TOTAL WILL BE 2.


7/8”casing


9-7/8” SIDE

DOOR ELEVATOR,

SLX TYPE

3+1 150 TON & 250 TON SIDE DOOR ELEVATORS,

CAN HANDLE 3 JOBS WITHOUT BACK UP.


9-7/8” SINGLE

JOINT ELEVATORS

3+1 CAN HANDLE 3 JOBS WITHOUT BACK UP.


ALSO OTHER HANDLING TOOL, LIKE HAND SLIPS, SAFETY CLAMP STABBING

GUIDE AND THREAD PROTECTOR ARE AVAILABLE TO HANDLE 3 JOBS WITHOUT

BACK UP.


5/8”casing


9-5/8” SIDE

DOOR ELEVATOR,

SLX TYPE

8 150 TON & 250 TON SIDE DOOR ELEVATORS,

CAN HANDLE 4 JOBS WITH BACK UP

9-5/8” SINGLE

JOINT ELEVATORS

8 CAN HANDLE 4 JOBS WITH BACK UP.


GUIDE AND THREAD PROTECTOR ARE AVAILABLE TO HANDLE 4 JOBS WITH

BACK UP.


5/8”casing


7-5/8” SIDE

DOOR ELEVATOR,

SLX TYPE

2+2 150 TON & 250 TON CAPACITY, CAN HANDLE

2 JOBS WITHOUT BACK UP. 2SETS ON

ORDER, TOTAL WILL BE 4.

7-5/8” SINGLE

JOINT ELEVATOR

2+2 CAN HANDLE 2 JOBS WITHOUT BACK UP.

2SETS ON ORDER, TOTAL WILL BE 4.


GUIDE AND THREAD PROTECTOR ARE AVAILABLE TO HANDLE 2 JOBS WITHOUT

BACK UP.

Current stock Tools for handling 7” casing


7” SIDE DOOR

ELEVATOR, SLX

TYPE

4+2 150 TON & 250 TON CAPACITY, CAN HANDLE

2 JOBS WITH BACK UP. 2SETS ON ORDER,

TOTAL WILL 6.

7” SINGLE JOINT

ELEVATOR

6 CAN HANDLE 3 JOBS WITH BACK UP.

7” HAND SLIPS 4+2 CAN HANDLE 2 JOBS WITH BACK UP. 2SETS

ON ORDER, TOTAL WILL BE 6.

ALSO OTHER HANDLING TOOL, LIKE SAFETY CLAMP STABBING GUIDE AND

THREAD PROTECTOR ARE AVAILABLE TO HANDLE 2 JOBS WITH BACK UP.


5/8” casing


6-5/8”SLX TYPE

SIDE DOOR

ELEVATOR

1+1 250 TON CAPACITY, CAN HANDLE 1JOB

WITHOUT BACK UP. 1SET ON ORDER, TOTAL

WILL BE 2.

6-5/8” SINGLE

JOINT ELEVATOR

2 CAN HANDLE 1 JOB WITH BACK UP

6-5/8” HAND

SLIPS

2 CAN HANDLE 1 JOB WITH BACK UP

ALSO OTHER HANDLING TOOL, LIKE SAFETY CLAMP STABBING GUIDE AND

THREAD PROTECTOR ARE AVAILABLE TO HANDLE 21 JOB WITH BACK UP.


1/2” tubing


THOSE SIZES OF TUBINGS ARE NOT PART OF OUR SCOPE OF WORK IN THE

CONTRACT, HOWEVER WE ARE STILL KEEPING SOME HANDLING TOOLS

5-1/2” SINGLE

JOINT ELEVATORS

2+2 TO HANDLE 1 JOB WITH BACK UP. 2SETS ON


5-1/2” SDML

HANDSLIPS



OTHER HANDLING TOOLS LIKE SAFETY CLAMP, THREAD PROTECTOR AND

STABBING GUID ALSO AVAILABLE TO HANDLE 1 JOB.


tubing


THOSE SIZES OF TUBINGS ARE NOT PART OF OUR SCOPE OF WORK IN THE

CONTRACT, HOWEVER WE ARE STILL KEEPING SOME HANDLING TOOLS

5” SINGLE JOINT

ELEVATORS



5” SDML

HANDSLIPS




STABBING GUID ALSO AVAILABLE TO HANDLE 1 JOB.


1/2” tubingEQUIPMENT QUANTITY REMARKS

4-1/2” SLX TYPE

SIDE DOOR

ELEVATOR

1+3 100 TON CAPACITY, TO HANDLE 1 JOB.

3SETS ON ORDER, TOTAL WILL BE 4

4-1/2” SINGLE

JOINT ELEVATORS

6 TO HANDLE 3 JOBS WITH BACK UP

4-1/2” SDML

HANDSLIPS

2+2 TO HANDLE 2 JOBS. 2SETS ON ORDER,

TOTAL WILL BE 4.


STABBING GUID ALSO AVAILABLE TO HANDLE 3 JOBS.


1/2” tubingEQUIPMENT

QUANTITY REMARKS

3-1/2” SLX TYPE

SIDE DOOR

ELEVATOR

1+3 100 TON CAPACITY, TO HANDLE 1 JOB.

3SETS ON ORDER, TOTAL WILL BE 4.

3-1/2” SINGLE

JOINT ELEVATORS


3-1/2” SDML

HANDSLIPS





7/8” tubing


2-7/8” SLX TYPE

SIDE DOOR

ELEVATOR

1+3 65 TON CAPACITY, TO HANDLE 1 JOB. 3SETS


2-7/8” SINGLE

JOINT ELEVATORS


2-7/8” SDML

HANDSLIPS

4 TO HANDLE 2 JOBS WITH BACK UP.




3/8” tubing


2-3/8” SLX TYPE

SIDE DOOR

ELEVATOR

1+3 65 TON CAPACITY, TO HANDLE 1 JOB. 3SETS


2-3/8” SINGLE

JOINT ELEVATORS


2-3/8” SDML

HANDSLIPS


OTHER HANDLING TOOLS LIKE SAFETY CLAMP AND STABBING GUID ALSO

AVAILABLE TO HANDLE 3 JOBS.

Current Al Saidiya personnel for

premium thread running services

Position QUANTITY REMARKS

TORQUE/TURN

OPERATOR

6 QUALIFIED TO OPERATE CONTECH

TORQUE/TURN COMPUTER SYSTEM AND

PERFORM PREMIUM THREAD CONNECTIONS.

CAN COVER 3 JOBS AT A TIME

TORQUE/TURN

WORKSHOP

TECHNICIAN

2 TRAINED AND QUALIFIED TECHNICIANS TO

REPAIR, MAINTAIN AND CALIBRATE THE

CT3000 SYSTEM

DETAILS OF VEHICLES USED FOR THE

OPERATION

NO: OF

VEHICLESTYPE REMARKS

4 HEAVY FOR EQUIPMENT MOBILISATION AND

DEMOBILIZATION.

6 LIGHT FOR CREW TRANSPORTATION FROM

OUR BASE TO DIFFERENT WORK

LOCATIONS.

Al Saidiya PERSONNEL

NO: OF JOBS

CAN

COVERED

EXPERIENCETYPE OF

TRAINING

NO,OF CREWPOSITION

3 JOBS4-7 YEARSHSE,IFR,DHR,

H2S,

6JAM

OPERATORS


H2S,DDC

10TONG

OPERATORS


H2S,DDC

10STABBERS

QA/QC OF THE PREMIUM THREADS JOBS

AS PREMIUM THREADS ARE VERY CRITICAL, THUS IN AL SAIDIYA WE CARRY

OUT THE FOLLOWING STEPS TO MAKE A LEAK FREE PREMIUM THREAD

CONNECTION AND CASING OR TUBING STRING INTGRITY:-

CONDUCT IN-HOUSE TRAINING FOR TORQUE/TURN OPERATORS ON HOW TO HANDLE

PREMIUM THREADS DURING RUNNING JOBS.

REGULAR BRIEFING TO THE CREW, BEFORE GOING OUT FOR ANY JOB.

USE THIRD PARTY TO CALIBRATE THE TORQUE GAUGES ON ANNUAL BASIS AND THE

TECHNICIANS CHECK THE CALIBRATION IN THE WORKSHOP BEFORE EACH JOB.

USE CONNECTION TECHNOLOGY CALIBARTION PROCEDURE TO CALIBRATE TORQUE/TURN

SYSTEM BEFORE EACH JOB.

ONE OF THE SENOIR PERSONNEL HAVE TO ATTEND ON EACH PREMIUM JOB ALONG WITH

CREW TO ENSURE THAT THEY FOLLOW THE PREMIUM THREAD CONNECTION HANDLING AND

RUNNING PROCEDURES AS WELL THE ACCEPTANCE CRITERIA OF THE EACH CONNECTION.

CONCLUSION

WITH CURRENT EQUIPMENTS AND HANDLING TOOLS AS WELL

AS TORQUE/TURN COMPUTER SYSTEM ANDTORQUE/TURN

OPERATORS, AL SAIDIYA CAN MANAGE TO HANDLE 3 PREMIUM

THREAD CASING OR TUBING JOB AT A TIME.

AL SAIDIYA WILL BE ABLE TO DEVELOP ITS PREMIUM JOB

ACTIVITY TO 3 JOBS AT A TIME IF WE ARE GIVEN AN

OPPORTUNITY BY ANY COMPANY.

Office Locations

Al Saidiya Trading LLC Headoffice: Muscat

P.O.Box:1950, Post Code: 133

Al Khuwair, Muscat

Sultanate of Oman

Tel: +968 - 94221111

Office: +968 – 24478672

Email: [email protected]

[email protected]

Al Saidiya Trading LLC, Workshop & Yard Area:

NIZWA (Interior of Oman)

Al Saidiya Operations: All Oman Concessions

mailto:[email protected]

mailto:[email protected]

SUMMARY

Full Service Casing & Tubing Running Service Company.

All types of PREMIUM & NON-PREMIUM jobs.

Experienced Omani Professionals

Countrywide Locations – Muscat, Nizwa.

Majority of Al Saidiya employees are Omani Nationals.

Al Saidiya is certified as ISO 14001:2008 Company

Thank You

For any further information or clarification please do nothesitate to contact us at any time. We would be delightedto receive your call.

Casing & Tubing Running Services - Al Saidiya · casing/tubing running jobs. Non-Premium thread service facility To provide comprehensive tools and equipments to run all types of

Documents