CASE STUDIES OF SUCCESSFUL ENTREPRENEURS TRAINED UNDER “SCHEME FOR ASSISTANCE TO TRAINING INSTITUTIONS” (ATI) Sponsored by Ministry of MSME Govt. of India, New Delhi Jointly published by National Institute of Micro, Small and Medium Enterprises (ni-msme) An Organization of the Ministry of MSME, Government of India, Hyderabad Central Institute of Plastics Engineering & Technology (CIPET) Department of Chemicals & Petrochemicals, Ministry of Chemicals & Fertilizers, Govt. of India IDA, Phase II, Cherlapally, Hyderabad – 500 051
26
Embed
CASE STUDIES OF SUCCESSFUL ENTREPRENEURS TRAINED ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CASE STUDIES OF SUCCESSFUL ENTREPRENEURS TRAINED UNDER
“SCHEME FOR ASSISTANCE TO TRAINING INSTITUTIONS” (ATI)
Sponsored by
Ministry of MSME
Govt. of India, New Delhi
Jointly published by
National Institute of Micro, Small and Medium Enterprises (ni-msme)
An Organization of the Ministry of MSME, Government of India, Hyderabad
Central Institute of Plastics Engineering & Technology (CIPET)
Department of Chemicals & Petrochemicals, Ministry of Chemicals & Fertilizers, Govt. of India IDA, Phase II, Cherlapally, Hyderabad – 500 051
CASE STUDIES OF SUCCESSFUL
ENTREPRENEURS TRAINED UNDER
ATI SCHEME OF
MINISTRY OF MSME, GOVERNMENT OF INDIA
Edited &
Compiled by:
Shri V Kiran Kumar Chief Manager (Project) & Head
CIPET-HYDERABAD +91-9959333415 040-27263750,
July 2015
Foreword
Creating an environment for a strong culture of entrepreneurship is a key for economic development of
the country. It is heartening to mention that India has been growing at a relatively high rate in the last
few years, and is likely to be the largest economy in the world by 2050. Fortunately, India is a young
country with about 63 percent population currently being in the working age group of 15 to 59 years
and it is pertinent to mention that improved training and skill development is critical for providing wage
employment or self-employment. The Ministry of MSME has been implementing skill training through
National Institute for Micro, Small and Medium Enterprises (ni-msme)to help and assist potential
people to become entrepreneurs or secure wage employment under the “Scheme of Assistance to
Training Institutes” since 2009-10 onwards. We gratefully acknowledge the support of the Ministry in
conducting the programmes.
It has been a journey of full of challenges. In general, most of youth are interested to go for wage
employment as most of them are not aware of the policies and schemes of the Ministry. They are also
not equipped with necessary skills to venture into business or secure wage employment. Therefore,
there was a need for programme on entrepreneurship and skill development with practical learning. ni-
msme has been privileged to be a part of this noble initiative through scheme of Assistance to Training
Institutes since inception. ni-msme has been Implementing the scheme in Southern India through
various esteemed partner Institutions. We are putting our best efforts to impart effective training,
monitoring and follow up. The efforts of ni-msme and its partner Institutions is resulting in to success
of our trainees. ni-msme has already brought one volume of success stories.
Moving forward, ni-msme would like to bring out few more success stories to present a glance of the
joint efforts of ni-msme & its Partner Institutions in nurturing entrepreneurship and enterprises in
many locations of few States. The credits of this success goes to collective efforts of Ministry of MSME,
ni-msme family & its Partner Institutions and our trainees for their efforts in learning, enhancing their
skills and endeavor to start their business.
These cases will continue to inspire various stakeholders as well as the future generation of
Trainees. In this context, we would like to thank the Heads of partner Institutions, Programme
coordinators and ni-msme Faculty members for their commitment and effective implementation of the
scheme for empowering the youth through necessary skills for self and wage employment.
Expecting many more such volumes from Partner Institutions in near future ……
M. Chandrasekhar Reddy
Director General
a
Success Story-1
Manasa Madasu is an Engineering graduate in the branch of Bio-Technology, PGDBM in Bio
Informatics at Osmania University, PGBM at HLU. Her Father is a Retired Sr. Manager from
BHEL, Hyderabad and mother is a Business women. Seeing the family in Business from her
childhood, she always had an ease in Business. The chosen industry was established for the
improvement of the importance of Bio Medical Engg. In India. The Hospital management
awareness is very much in need to every individual but bio medical is the source to start up.
As the basic bio products are through Disposals in Plastics.
She approached with the idea to MSME balanagar. The officials there have referred her
to Mr. Sai Surendra from CIPET for future industry & Technology ideas.
MED AVIO POLYMERS:
The Initiative to start the Industry is with the involvement in many live projects works in
college & with family support. She was identified for the EDP Programme sponsored by
ni-msme. She has completed the training and learnt about the Plastics Technology to start
up the Bio medical products in Plastics. She has availed a bank loan of Rs. 40 lakhs through
State Bank of Hyderabad, BHEL branch. The unit was set up at:
Mrs D Aruna is a Post graduate in HR Department at Dr. B R Ambedkar Open University at
Hyderabad. she always had an ease in Business. She worked in Market field and She was
very much interested in Entrepreneurship. She wants to set up an Industry.
She approached with the idea to MSME balanagar. The officials there have referred her
to Mr. Sai surendra from CIPET for future industry & Technology ideas. CIPET has
suggested her to get trained initially and then later to start the unit. She has joined in the
training programme and successfully completed the programme She has availed a bank loan
through CGTMSE Scheme of Rs. 30 lakhs through Canara Bank, Ameerpet branch.
The unit was set up at :
M/s Ananya Greentech
Cherlapally, Hyderabad
SUCCESS STORIES- 12
JK Polymers are set up by Mr Kareem Shaik is a Post graduate. As his father Mr Madar
Saheb Shaik is also a business man and mother was a house wife
While he was trying his business plans and he was very much interested in
Entrepreneurship. He has identified the prosperity of business in Plastics Recycling and
approached CIPET when he has seen the advt. of CIPET – NIMSME. CIPET has suggested
him to get trained initially and then later to start the unit. He has joined in the training
programme and successfully completed the Programme
He has started the plastics Recycled Granules Manufacturing unit with a self investment of
Rs. 20,00,000/- . He was manufacturing Various types granuels like PP, HDPE, LDPE, Etc
The unit was started in:
M/s JK Polymers India Pvt. Ltd,
PLOT NO : D-36 , PHASE - 5,
IDA Jeedimetla, Hyderabad.
Mob: 9550776976
SUCCESS STORIES- 13
Mr Akhil Sanjeev is an B Tech Engineering graduate. As his father Mr Sanjeevi was an
entrepreneur in the area of plastics manufacturing and mother was a house wife. Seeing the
family in Business from his childhood, he always had an ease in Business. He want to
establish his own unit and He approached CIPET for Technical Support to start industry.
CIPET has suggested for a training as it is starting a training programme in association with
ni-msme.
After training he has approached Bank of Maharastra, Khairatabad for a bank loan
and Rs. 20 lakhs was sanctioned a working capital.
He has started the plastics Recycling unit
M/s Aavegh Polymers:
Plot No. 3 & 4, Survey No. 229-246,
BN Reddy Colony,
Phase 1, Main Road,
Cherlapally, Hyderabad.
Mob: 9966400007
For any further queries on courses and technical support provided by CIPET-Hyderabad.
Please contact:
Shri V Kiran Kumar, Chief Manager (Project) & Head
Central Institute of Plastics Engineering & Technology (CIPET), Hyderabad Ministry of Chemicals & Fertilizers, Govt. of India IDA, Phase II, Cherlapally, Hyderabad- 500051.