8/19/2019 CASE IH Steiger quadtrac
1/16
STEIGER® & QUADTRAC
394 - 548HP RATED POWER
433 - 602HP MAXIMUM POWER
321 hectares ploughed
in 24 hours
STX STEIGER
8/19/2019 CASE IH Steiger quadtrac
2/16
2
Low fuel consumptionfrom the world record holderOne tank of fuel is enough for up to 22
hours’ non-stop work. HID headlightsare available to turn night into day.
Power by traditionProven 12.9 litre and 14.9 litrecapacity six cylinder engines from394hp(CV) / 290 kW to 548 hp(CV) / 403 kW.All engines have four-valve technologyfor better performance and low fuelconsumption and offer torque rise of upto 40%.
Unbelievable manoeuvrability Articulation with an extremely widerange of movement: up to ± 13° framepivot angle about the longitudinal axishelps ensure constant good groundcontact and optimum weight distribution,
up to 42° frame articulation angle toright and left.
Keep it comingDesigned for maximum permanent loadwith an extremely torsion resistant,12mm steel frame, 115mm axle diameter,
special large planetary drive andreinforced bearings.
High lifting and pulling capacity - lowcompactionThree-point hitch with electronic slipcontrol: up to 8949kg continuous liftcapacity. Extremely heavy duty, centrepull adjustable drawbar. Optimum powertrain through long wheelbase chassis forideal weight distribution.
Awesome hydraulic powerHigh performance hydraulics: forsteering, auxiliary valves, power beyondport and three point hitch. Pressure-flow
compensated axial piston pump with151l/min or even 208l/min pumpcapacity available.
All-round visibility from the Surveyor™ cabExpansive areas of glass (6.3m2) for perfect visibility and an ergonomicoperator environment for maximum comfort. The tractor is fitted withautomatic air - conditioning, heated Optima™ seat with lumbar support
and a fully adjustable right armrest incorporating the most importantcontrols. Luxury version available with exclusive leather trim.
In total control at all timesErgonomic, modern controls: fullyadjustable steering column, electronicshifting, information display in the rightcab column. If required, withperformance monitor for full informationon all functions and maintenanceintervals.
Smart design -you are driving the flagship!Smart because it looks good andsmart because it helps you savetime and effort. The sloping hoodprovides easy access to the servicepoints from ground level, whilethe cab exterior is designed forsafe entry and exit.
LEADING THE INDUSTRY
AutoSkip™ shiftingfor smooth acceleration16x2 Powershift transmission: with ninegears in the central working range from5-13kph. AutoSkip™ shift will automaticallyskip gears when changing up and forrapid acceleration. Maximum speed of
37kph* helps ensure that a QUADTRAC orSTEIGER gets to work quickly.
8/19/2019 CASE IH Steiger quadtrac
3/16
3
Case IH has the perfect STEIGER andQUADTRAC Series for your operation.Choose from four major models rangingfrom 394 to 548 horsepower in Heavy-Duty wheeled, Scraper and QUADTRACversions.
THE WORLD RECORD HOLDER
More choice in the top power class. STEIGER and QUADTRAC tractors are tuned for
maximum performance and offer total ease of operation and cab comfort. This Series
offers large agricultural operations more choice than ever in the power class from
394hp(CV) / 290kW to 548 hp(CV) / 403kW: four models that differ not only in their
horsepower, but also in their technical conception, in three variants, making it possible
for every enterprise to decide which model best meets its requirements.
Based on the experience of 50 years of Steiger production at the Case IH facility in Fargo,North Dakota, the tradition of STEIGER tractors continues with two series.
STEIGER – the legendary articulated tractor. Four equally sized large wheels, four wheel
drive and a long wheelbase transfer all the power to the ground.
QUADTRAC - the flagship has four independently suspended crawler tracks and a 3.91m
wheelbase. Optimum traction and ground adjustment at all times with minimum ground
pressure make this the tractor for the heaviest ground conditions.
*) to comply with legislation and specification in your country
This Series from Case IH combines the tradition of the legendary
STEIGER tractors with the requirements of the 21st century.
No compromise large acreage technology for maximum productivity -as proven in the industry’s highest accolade: the 24 hour ploughing
World Record.
8/19/2019 CASE IH Steiger quadtrac
4/16
4
Largest cab in the industry Excellent visibility Classic Case IH ergonomics Intuitive instrument displays
Step in to the best cab on the market.
Light up even the darkest of nights withthe high intensity discharge (HID) light,available for the centre of the front grille.
1
2
3
4
5
6
8
9
10
11
12
14
13
7
8/19/2019 CASE IH Steiger quadtrac
5/16
5
CAB AND CONTROLS
A one-piece curved front windshield, ultra-narrow hood and slender steering column contribute to an exceptional view. The back
window has the same panoramic outlook to let you hook-up and watch the widest implements. Instrumentation in the right-hand A-
post is perfectly positioned at eye level to keep you informed. Monitor basic operating systems and track critical functions with the
advanced Performance monitor. The right-hand armrest control console can be fully adjusted to fit your chosen position. Intuitive
placement of controls reduces operator effort. The entire console moves with the air-suspension Optima seat, so you can find the
perfect position for the job. The new Surveyor cab has an estimated 75dB(A) sound level. For excellent night vision, the cab comes with
a standard lighting package that is much more than “standard”. With 55-watt lamps lighting the way, you’ll quickly see the difference
on your first night-shift. For those who like to run just as long after the sun goes down, a highintensity discharge (HID) light for the
centre of the grille is available.
Appreciate the panoramic productivity.When you’re driving a big tractor with bigimplements, you need a big cab with bigvisibility… to the front, sides and rear.That’s exactly what you get from thestunning Surveyor cab.
1 Vents to direct air flow2 Tilt and telescoping steering wheel
3 Shuttle lever
4 Carpeted mat
5 Optima air-suspension seat with lumbar support
6 Padded passenger seat with safety belt*
7 Armrest with throttle lever and hydraulic controls
8 A-post instrumentation and Performance monitor
9 One-piece tinted windshield
10 Elevated footrests
11 Front and rear windshield wipers
12 Six power outlets
13 Service window giving access to the right hand side
14 Front window step for cleaning windows or changing lights
*leather seat not offered in UK/ROI
Unmatched comfort and convenience.
Case IH equip the STEIGER and QUADTRAC tractors with the stunningSurveyor™ cab. From the expansive curved glass and forward sloping
hood to the comfortable Optima™ seat and ergonomic armrest controls,
the Surveyor cab creates the ultimate operator environment.
8/19/2019 CASE IH Steiger quadtrac
6/16
8/19/2019 CASE IH Steiger quadtrac
7/16
7
Click through the gears effortlesslyusing the electronic Powershift controlintegrated into the throttle.
The 16x2 Full Powershift transmissionfeatures an electronic control systemfor optimum shift quality.
Forward or reverse travel withoutusing the clutch by simply moving thePowershuttle lever.
Ready to run reliably.
At the heart of every STEIGER and QUADTRAC tractoris an engine designed to deliver maximum horsepower
with enhanced efficiency.
Electronically controlled engines in the STEIGER and QUADTRAC tractors ensure peak power growth without burning unnecessary fuel
for lower costs. Torque rise of up to 40 percent lets you get through tough spots without downshifting. Drawbar pull holds steady even
as conditions change in the field and torque peaks with 2563Nm at 1400rpm. When engine rpm drops under rated load, the engine
provides additional power to give you up to 54 more horsepower. With that kind of power growth, you have the boost you need to lug
through low spots and other difficult terrain. Perfect power transfer. The most important factor in a powershift is not the total number
of gears you have to choose from, but how many are in the primary working range. That’s where the 16-speed Full Powershift reallystands out with nine gears between 5 and 13kph. Depending on tyre size, this gives you 0.8kph speed splits in the working range - and
a better chance at finding the perfect speed for any job. The AutoSkip™ shift feature for the STEIGER and QUADTRAC tractors skips
automatically every other gear between 4 and 13 to help you get up to speed for faster transport. Pressing the Select Shift button on
the front of the throttle handle allows single shifts for more-precise speed choices — ideal for precision-farming operations. You can
also get from field to field faster with transport speeds up to 37kph* on the road.
*) to comply with legislation and specification in your country
ENGINE AND TRANSMISSION
8/19/2019 CASE IH Steiger quadtrac
8/16
8
Advanced electro-hydraulic controls putremote functions at your fingertips.
Up to nine remotes*. Four additionalvalves may be field installed
High lift capacity of up to 8949kg
PTO option available on every model
Up to five rear remotes can be factoryfitted. Four additional valves may be fieldinstalled.
A 1000rpm PTO assembly can be addedto any STEIGER and QUADTRAC.
Efficient power transfer to tow widerimplements
8/19/2019 CASE IH Steiger quadtrac
9/16
9
HYDRAULICS, PTO AND DRIVELINE
High performance hydraulics. The hydraul ic system of a STEIGER and QUADTRAC tractor provides power for steering, remotes, power
beyond, and the three-point hitch. A standard 151lpm (159lpm on QUADTRAC 535) pump relies on an efficient pressure-flow-
compensating (PFC) system that delivers the correct flow and pressure where it’s needed when it’s needed. Specify the 208lpm (216lpm
QUADTRAC 535) high-capacity pump for intensive hydraulic operations such as air seeders and beet lifters.
Huge lifting capacity , excellent response. To operate mounted tillage tools, planters or drills, equip this tractor with a factory-installed
threepoint hitch (not available on scraper versions). You’ll instantly have a lift capacity of up to 8949kg on QUADTRAC models. The
raise/lower switch and position control are within your natural reach on the armrest console.
True pulling power. STEIGER and QUADTRAC tractors have
the advantage where it really matters–at the drawbar. That’s
the common denominator used to size tillage tools to the
tractor. The centre-pull drawbar design efficiently transfers
engine horsepower into pulling power. Unlike competitive
units with drawbars mounted much farther behind thearticulation joint, the drawbar of this tractor is just 250mm
from the pivot point for maximum power transfer and
increased frame strength.
High capacity means higherproductivity.
To make the most of a new Series four-wheel drive,
specify high-capacity hydraulics, heavy-duty hitch and
powerful PTO. When you need to lift, lower, and power
implements, these systems help you do more work.
Conventional articulated steering gives the QUADTRACSeries full-power turns within 5.7m with minimal ridging.Easy-effort steering in all conditions allows you to do morework in less time, without levelling ridges left onheadlands.
8/19/2019 CASE IH Steiger quadtrac
10/16
10
Four independent tracks. Full power turns with minimal ridging. Built-in weight for easier ballasting. Choice of tyres or tracks.
8/19/2019 CASE IH Steiger quadtrac
11/16
The QUADTRAC 385, 435, 485, 535 in a version with 76 or 91cm tracks practically “floats” through the fields, giving you a smooth ride
with less soil compaction. That can result in better seed placement, a healthier root zone, uniform germination and higher yields.
As weight transfer is the key to putting power on the ground, the QUADTRAC tractor maintains an ideal 50/50 weight distribution under full
draft loads. Unlike a two-track system, which shifts weight from the front to the rear of the track, the QUADTRAC design evenly divides
the weight under load to an almost identical PSI load at the front and rear of the track. Two-track systems transfer more weight to the rear,
which decreases traction in the front and increases compaction at the rear. Another advantage of the QUADTRAC design is the positive
drive system. Lugs engage with bars on the drive wheel to eliminate internal slippage and help ensure minimal ground slippage.
A QUADTRAC tractor offers full-power turns under load, unlike two-track systems that
vary power to each track during turns. This makes it more efficient in contour and hillside
operations because no additional power is required to turn. Thanks to its built-in weight,
a STEIGER or QUADTRAC tractor offers an advantage over competitive four-wheel drives.
Greater gross vehicle weight reduces the amount of additional ballast needed for peak
performance and pulling power. When necessary, weight can be added to the front or
back by attaching cast brackets to the tractor frame. With the correct ballast, right tyres
and recommended PSI, a Series STEIGER tractor will respond with more pulling power,
a smoother ride, and maximum fuel efficiency.
11
TRACTION
Maximum traction withminimum compaction.
Case IH engineers first introduced the QUADTRAC
design in 1996 and it has led the industry ever since.
Like its predecessors, the QUADTRAC tractor continues
the tradition of setting new industry standards.
The QUADTRAC tractor is built to pivotand oscillate for constant track-to-soilcontact over rolling terrain.
The proven track design of a Case IHQUADTRAC tractor features positivedrive, self-adjusting tension and self-cleaning rubber belts.
QUADTRAC - 5.8PSI with 5.6m2 groundcontact.
8/19/2019 CASE IH Steiger quadtrac
12/16
12
A Case IH Steiger 4WD tractor is just as at-home on a land-leveling site or commercial scraper crew as it is in the farm fields. Special scraper versions of the Steiger 385,
435, 485, and 535 tractors have heavy scraper axles, heavy-duty drawbars, built-in frame weight and powerful engines with rugged transmissions. Also standard on all
scraper models are differential locks, backup alarm, tow cable, and beacon lights. For safety on the farm and on the construction jobsite, these tractors are ROPS and
FOPS certified. A special scraper quick-hitch drawbar with tow cable works well with most popular scraper brands. All this adds up to speedy hauling cycles to help you
move more dirt in a day, boosting your business productivity — and profitability.
SCRAPER APPLICATIONS
Built to work in the dirt.
Steiger scraper configurations designed with added durability tohandle demands of earthmoving applications.
The scraper tractor configuration’srugged chassis has the durabilityneeded for heavy loads, and responsivehydraulics for the cycle times youdemand.
For cutting to grade precisely andautomatically, the electronic hydraulicsystem
of a Steiger tractor interfaceswith popular laser-control systems,eliminating the need for expensive add-on valves.
8/19/2019 CASE IH Steiger quadtrac
13/16
13
INTEGRATED PRECISIONFOR MAXIMUM PRODUCTION
A powerful tool
for professional farming.
Increasing yield with the same input or
maintaining yield with reduced input, thatis what is done with Precision Farming.
With the DGPS based system on the
Case IH Axial-Flow® combines, you
permanently register your yield and store
it, linked to the precise location.
That information - in combination with
other DGPS based data l ike crop moisture
content and soil variations - is used to
prepare application maps for accurate,
site-specific seeding and spraying, thusincreasing your overall performance.
Precision Farming also reduces labour
costs and fuel consumption.
ISOBUS compatibility.
Having defined a communication protocol
used across the industry, ISOBUS extends
the possibilities of precision farming
through more intelligent functions and
efficient GPS data integration.
The Case IH AFS AccuGuide™
Autoguidance System.
Operators can concentrate fully on theperformance of their implement, while
the steering of the tractor or combine is
managed by AccuGuide™ Automatic
Steering System, designed and developed
by Case IH. In combination with DGPS
technology this system ensures parallelpasses when working in straight lines,
curves, pivots, or on undulating ground.
When planting, seeding, cultivating or
Advanced Farming Systems availableon Puma™ tractors are an essentialingredient for efficiency.
AccuGuide™ automatic steeringsystems with GPS receiver improveprecision farming accuracy a step further.
ISOBUS a powerful communication toolto control ISOBUS compatibleimplements for highest productivity.
tilling, there is no risk of overlap or
missed ground, even in difficult weather
conditions or at night.
AFS Pro 600 Display.
This industry-leading user interface system displays data in the cab, stores it for analysis
and makes adjustments on the go.
8/19/2019 CASE IH Steiger quadtrac
14/16
1414
OUR SYSTEMS APPROACH
Your local Case IH dealer can work with
CNH Capital to offer solutions that best fit
your budget and business goals.
At CNH Capital, we understand that no
two farms or agricultural businesses arethe same. That’s why we work so hard to
understand your needs first. We make it
our job to know your business inside and
out – your goals, your ideas, and your
unique outlook on the future. Then we can
put together financial solutions and
services that are right for you.
Skilled business advisor
at your dealership.
Demand more from your
Case IH dealership.
Purchasing a stand-alone piece of new
equipment? Keeping a whole fleet up-to-
date? Whatever your size of operation,
contact your local Case IH dealership for
professional advice on finance and future-
safe business investment. Case IH knows
your farming needs best.
Parts & service FinanceDealer
MAX
100% Support
100% Availability
Maintain the productivity of your
investment. Case IH and its dedicated
dealer network provide excellent support
when you take delivery of your new
machine and whilst it remains in your
ownership. On the farm, you can rely on
trained service professionals to maintain
the productivity of your investment.
Protect the value of your investment.
Behind every Case IH product stands an
extensive European parts logisticsorganisation, stocking more than 700,000
part numbers for products old and new.
Choosing to fit genuine Case IH parts will
maintain the safety, value and
performance of your original investment.
MAX - the new premium service from Case IH. We are always ready for you, around theclock, the whole year. Express delivery: when and where you need it.You get top priority during the season because your harvest cannot wait.
The call is free. However some European Operators may apply a charge, if the call ismade from a mobile phone. For any information about charge rate, please enquire inadvance from your provider.
00800 227344 00
00800 CASE IH 00
Extended protection programme.Case IH is at your side giving you the best professional solution: Safegard from CovéaFleet. This is the personalised insurance coverage for your Case IH machinery. Pleasecontact your dealer for more details. Subject to status and availability. Terms and
conditions apply.
8/19/2019 CASE IH Steiger quadtrac
15/16
15
SPECIFICATIONS
TECHNICAL DATA STEIGER®
385 STEIGER®
435 QUADTRAC 385 QUADTRAC 435 QUADTRAC 485 QUADTRAC 535
ENGINE IVECO CURSOR IVECO CURSOR IVECO CURSOR IVECO CURSOR IVECO CURSOR CUMMINS QSX
Displacement (cm3) 12900 12900 12900 12900 12900 14900
Rated engine power [kW/hp(CV)] 290 / 394 327 / 444 290 / 394 327 / 444 365 / 496 403 / 548
Rated Speed (rpm) 2000 2000 2000 2000 2000 2100
Maximum engine power [kW/hp(CV)] 319 / 433 360 / 489 319 / 433 360 / 489 402 / 546 443 / 602
Maximum torque at 1400rpm (Nm) 1939 2035 1939 2035 2442 2563
Engine torque rise (%) 40 40 40 40 40 40
Power growth [kW/hp(CV)] 29 / 39 33 / 45 29 / 39 33 / 45 37 / 50 40 / 54
Rated PTO power [kW/hp(CV)] 250 / 340 280 / 380 250 / 340 280 / 380 317 / 431 350 / 476
Fuel tank capacity (l) 1136 1136 1136 1136 1136 1136
TRANSMISSION
Type 16/2 Powershift 16/2 Powershift 16/2 Powershift 16/2 Powershift 16/2 Powershift 16/2 Powershift
AXLES
Axle drive Compound with 3 planets Drop Gear with 3 planets
Axle diameter (mm) 115 115 Flanged Flanged Flanged Flanged
HYDRAULICS
Hydraulic pump Pressure-flow compensated axial piston pump
Pump capacity Standard / Option (l/min) 151 / 208 151 / 208 151 / 208 151 / 208 151 / 208 159 / 216
Hitch category IV-N IV-N IV-N IV-N IV-N IV-N
Lift capacity, continuous at 610mm (kg) 8900 8900 8949 8949 8949 8949
CAB
Surveyor cab Standard / Option Deluxe / Luxury
WEIGHTS*
Total permitted weight (kg) 20864 20864 24494 24494 24494 24494
DIMENSIONS*
Wheel base (mm) 3911 3911 3912 3912 3912 3912
Frame pivot angle (°) ± 13 ± 13 ± 13 ± 13 ± 13 ± 13Frame articulation angle, horizontal (°) ± 42 ± 42 ± 38 ± 38 ± 38 ± 38
Centre line turning radius (m) 5.7 5.7 5.7 5.7 5.7 5.7
TRACKS
Drive Wheel drive 4 independent crawler tracks
Track width Standard / Option (cm) – – 76 / 91 76 / 91 76 / 91 76 / 91
*) To comply with legislation and specification in your country – Not available **) STEIGER 430 not offered in UK/ROI Case IH recommends lubricants
In addition to the extensive range of
standard equipment, Case IH offer acomprehensive choice of dealer installedaccessories, which are available at extracost.
Dealer installed
accessories
8/19/2019 CASE IH Steiger quadtrac
16/16
CASE IH: FOR THOSE WHO DEMAND MORE
www.caseih.com
Safety never hurts! Always read the Operator’s Manual before working with any equipment. Inspect equipment before using it, and be sure it is operating properly.Follow the product safety signs, and use any safety features provided.
This literature has been published for worldwide circulation. The standard and optional equipment and the availability of individual models may vary from one country to the next. Case IH reserves the right to undertake modifications without prior notice to the design and technical equipment at all times without this resulting in any obligation whatsoever to make such modifications to units already sold. Whilst every effort is made to ensure that the specifications, descriptions and illustrations in this brochure are correct at the time of going to press,these are also subject to change without prior notice. Illustrations may show optional equipment or may not show all standard equipment.
Case IH recommends lubricants
CNH Österreich GmbH, Steyrerstr. 32, A-4300 St.Valentin © 2008 CASE IH - STEIGER & QUADTRAC/COM/BR - Free phone 00800 22 73 44 00 - Printed in I taly - 04/08 - TP01 - Cod. N. 8C0006/INB