CART & STACKING STAND SPECIFICATIONS CART & STACKING STAND SPECIFICATIONS www.turbochef.com DOC-1157 / Revision F / April 2018 / Page 1 of 2 TurboChef Global Operations 2801 Trade Center Drive Carrollton, Texas 75007 USA US: 800.90TURBO (800.908.8726) International: +1 214.379.6000 Fax: +1 214.379.6073 TM 18” 457mm 32” 813mm 27.5” 699mm 32” 813mm 32.5” 826mm PART NUMBERS n 18” Oven Cart: NGC-1217-2 n 24” Oven Cart: NGC-1217-1 n 32” Oven Cart: NGC-1217-3 n Stacking Stand (i3 and i5, for use with 18” cart only): i5-9369 CONSTRUCTION n Stainless steel top shelf and frame n Integrated locking casters (oven carts only) COMPATIBILITY n C3 Oven: Remove legs and attach to inner mounting holes with provided hardware n NGC Oven: Remove legs and attach to outer mounting holes with provided hardware n HhB Oven: Attach to outer mounting holes with HhB oven cart clamp set (see “Stacking Hardware,” below) n i5 and i3 Oven: Place oven on top shelf. Oven is sealed to the top shelf via integrated rubber-base gasket n Sota Oven: Stacking and installation on oven cart is not supported n Encore Oven: Remove legs and attach to mounting holes with provided hardware CAUTION: Seals, attachments, and locking the casters will not prevent injury or oven damage if the oven is forcefully pulled or not properly attached. STACKING HARDWARE CAUTION: Ovens cannot be safely stacked on top of a 32” cart. n C3 and NGC Stacking Bracket (P/N:TC3-0323) n NGC Sorbothane® Stacking Mat (P/N: NGC-1342-1) n HhB Stacking Bracket (P/N: HHB-8165) n HhB Oven Cart Clamp Set (P/N: HHB-8206) n Encore Stacking Bracket (P/N: ENC-1201) NOTE: See DOC-1032 for comprehensive stacking information. 18” Oven Cart-Front 32” Oven Cart-Front Oven Stacking Stand-Front 24” 610mm 26.6” 676mm 27.8” 706mm 44.6” 1133mm 27” 686mm 21.3” 541mm 28.6 726mm 24” Oven Cart-Front All Oven Carts-Top Shelf Oven Stacking Stand-Side OVEN DIMENSIONS WITH CARTS Cart Only NGC C3 HhB i5 i3 Encore Cart Only T: i3 B: i5 T: i3 B: i3 T: i5 B: i5 T: i5 B: i3 T: NGC B: NGC T: C3 B: C3 T: NGC B: C3 T: HhB B: HhB T: HhB B: C3 T: NGC B: HhB T: Encore B: Encore T: Encore B: NGC Inches mm 18 457 37 940 39.5 1003 38.5 978 42.3 1074 39.25 997 37 940 Inches mm 18 457 65.85 1673 65.85 1673 68.9 1750 68.9 1750 56 1422 61 1549 58.5 1486 59 1499 60 1524 57.5 1461 56 1422 56 1422 Inches mm 24 610 43 1092 45.5 1156 44.5 1130 48.3 1227 45.25 1149 43 1092 Inches mm 24 610 - - - - 62 1575 67 1702 64.5 1638 65 1651 66 1676 63.5 1613 62 1575 62 1575 Inches mm 32 813 51 1295 53.5 1359 52.5 1334 56.3 1430 53.25 1353 51 1295 Inches mm 32 813 - - - - - - - - - - - - Cart Only NGC C3 HhB i5 i3 Encore Cart Only T: i3 B: i5 T: i3 B: i3 T: i5 B: i5 T: i5 B: i3 T: NGC B: NGC T: C3 B: C3 T: NGC B: C3 T: HhB B: HhB T: HhB B: C3 T: NGC B: HhB T: Encore B: Encore T: Encore B: NGC Inches mm 27.8 706 27.8 706 29 737 27.8 706 28.1 714 27.8 706 27.8 706 Inches mm 27.8 706 32.5 826 32.5 826 32.5 826 32.5 826 27.8 706 29 737 29 737 27.8 706 29 737 27.8 706 27.8 706 27.8 706 Cart Only NGC C3 HhB i5 i3 Encore Cart Only T: i3 B: i5 T: i3 B: i3 T: i5 B: i5 T: i5 B: i3 T: NGC B: NGC T: C3 B: C3 T: NGC B: C3 T: HhB B: HhB T: HhB B: C3 T: NGC B: HhB T: Encore B: Encore T: Encore B: NGC Inches mm 26.6 676 28.2 716 32.25 819 31.5 800 31.1 790 31.25 794 32.7 831 Inches mm 26.6 676 31.25 794 31.25 794 31.1 790 31.25 794 28.2 716 32.25 819 32.25 819 31.5 800 32.25 819 31.5 800 32.7 831 32.7 831 Height - Stacked Ovens Width - Stacked Ovens Depth - Stacked Ovens Height - Single Ovens Width - Single Ovens Depth - Single Ovens ” mm v
2
Embed
CART & STACKING STAND SPECIFICATIONS · n i5 and i3 Oven: Place oven on top shelf. Oven is sealed to the top 676mm shelf via integrated rubber-base gasket n32” Sota Oven: Stacking
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CART & STACKING STANDSPECIFICATIONS
CA
RT & STA
CKING
STAN
D SPECIFIC
ATION
S
www.turbochef.comDOC-1157 / Revision F /April 2018 / Page 1 of 2
TurboChef Global Operations 2801 Trade Center DriveCarrollton, Texas 75007 USA
PART NUMBERSn 18” Oven Cart: NGC-1217-2n 24” Oven Cart: NGC-1217-1n 32” Oven Cart: NGC-1217-3n Stacking Stand (i3 and i5, for use with 18” cart only): i5-9369
CONSTRUCTIONn Stainless steel top shelf and framen Integrated locking casters (oven carts only)
COMPATIBILITYn C3 Oven: Remove legs and attach to inner mounting holes with provided hardwaren NGC Oven: Remove legs and attach to outer mounting holes with provided hardwaren HhB Oven: Attach to outer mounting holes with HhB oven cart clamp set (see “Stacking Hardware,” below)n i5 and i3 Oven: Place oven on top shelf. Oven is sealed to the top shelf via integrated rubber-base gasketn Sota Oven: Stacking and installation on oven cart is not supportedn Encore Oven: Remove legs and attach to mounting holes with provided hardware
CAUTION: Seals, attachments, and locking the casters will not prevent injury or oven damage if the oven is forcefully pulled or not properly attached.
STACKING HARDWARE
CAUTION: Ovens cannot be safely stacked on top of a 32” cart.
n C3 and NGC Stacking Bracket (P/N:TC3-0323)n NGC Sorbothane® Stacking Mat (P/N: NGC-1342-1)n HhB Stacking Bracket (P/N: HHB-8165)n HhB Oven Cart Clamp Set (P/N: HHB-8206)n Encore Stacking Bracket (P/N: ENC-1201)
NOTE: See DOC-1032 for comprehensive stacking information.
18” Oven Cart-Front
32” Oven Cart-Front
Oven Stacking Stand-Front
18”457mm
24”610mm
44.6”1133mm
32”813mm
26.6”676mm
27.8”706mm
27.5”699mm
32”813mm
27”686mm
24.1”612mm
24.1”612mm
20.9”531mm
20.9”531mm
21.3”541mm28.6
726mm32.5”
826mm
18”457mm
24”610mm
44.6”1133mm
32”813mm
26.6”676mm
27.8”706mm
27.5”699mm
32”813mm
27”686mm
24.1”612mm
24.1”612mm
20.9”531mm
20.9”531mm
21.3”541mm28.6
726mm32.5”
826mm
18”457mm
24”610mm
44.6”1133mm
32”813mm
26.6”676mm
27.8”706mm
27.5”699mm
32”813mm
27”686mm
24.1”612mm
24.1”612mm
20.9”531mm
20.9”531mm
21.3”541mm28.6
726mm32.5”
826mm
24” Oven Cart-Front
All Oven Carts-Top Shelf
Oven Stacking Stand-Side
OVEN DIMENSIONS WITH CARTS
Cart Only NGC C3 HhB i5 i3 Encore Cart Only T: i3B: i5
T: i3B: i3
T: i5B: i5
T: i5B: i3
T: NGCB: NGC
T: C3B: C3
T: NGCB: C3
T: HhBB: HhB
T: HhBB: C3
T: NGCB: HhB
T: EncoreB: Encore
T: EncoreB: NGC
Inchesmm
18457
37940
39.51003
38.5978
42.31074
39.25997
37940
Inchesmm
18457
65.851673
65.851673
68.91750
68.91750
561422
611549
58.51486
591499
601524
57.51461
561422
561422
Inchesmm
24610
431092
45.51156
44.51130
48.31227
45.251149
431092
Inchesmm
24610 - - - - 62
157567
170264.51638
651651
661676
63.51613
621575
621575
Inchesmm
32813
511295
53.51359
52.51334
56.31430
53.251353
511295
Inchesmm
32813 - - - - - - - - - - - -
Cart Only NGC C3 HhB i5 i3 Encore Cart Only T: i3B: i5
T: i3B: i3
T: i5B: i5
T: i5B: i3
T: NGCB: NGC
T: C3B: C3
T: NGCB: C3
T: HhBB: HhB
T: HhBB: C3
T: NGCB: HhB
T: EncoreB: Encore
T: EncoreB: NGC
Inchesmm
27.8706
27.8706
29737
27.8706
28.1714
27.8706
27.8706
Inchesmm
27.8706
32.5826
32.5826
32.5826
32.5826
27.8706
29 737
29 737
27.8706
29 737
27.8706
27.8706
27.8706
Cart Only NGC C3 HhB i5 i3 Encore Cart Only T: i3B: i5
T: i3B: i3
T: i5B: i5
T: i5B: i3
T: NGCB: NGC
T: C3B: C3
T: NGCB: C3
T: HhBB: HhB
T: HhBB: C3
T: NGCB: HhB
T: EncoreB: Encore
T: EncoreB: NGC
Inchesmm
26.6676
28.2716
32.25819
31.5800
31.1790
31.25794
32.7831
Inchesmm
26.6676
31.25794
31.25794
31.1790
31.25 794
28.2716
32.25819
32.25819
31.5800
32.25819
31.5800
32.7831
32.7831
Height - Stacked Ovens
Width - Stacked Ovens
Depth - Stacked Ovens
Height - Single Ovens
Width - Single Ovens
Depth - Single Ovens
18”457mm
24”610mm
44.6”1133mm
32”813mm
26.6”676mm
27.8”706mm
27.5”699mm
32”813mm
27”686mm
24.1”612mm
24.1”612mm
20.9”531mm
20.9”531mm
21.3”541mm28.6
726mm32.5”
826mm
v
HhC CONVEYOR OVEN CARTS
PART NUMBERSn 35.8” Oven Cart: HCT-3004-1n 23.5” Oven Cart: HCT-3004-2
* One stacking kit is required to stack two ovens and two stacking kits are required to stack three ovens; see “Stacking Hardware,” below.† When stacking, HhC 2620 ovens must always be placed below HhC 2020 and/or HhC 1618 ovens. HhC 2020 ovens must always be placed below HhC 1618 ovens.
CAUTION: Attachments and locking the casters will not prevent injury or oven damage if the oven is forcefully pulled or not properly attached.
CAUTION: Ovens cannot be safely stacked using 35.8” cart.
STACKING HARDWARE
n Stacking Kit, HhC 2020 to HhC 2020, HhC 2620 to HhC 2620, or HhC 2020 to HhC 2620 (flush back): HCT-3001
n Stacking Kit, HhC 2020 to HhC 2620 (flush front): HCW-4173
n Stacking Kit, HhC 1618 bottom to HhC 1618 middle/top: HCS-3001
n Stacking Kit, HhC 1618 middle to HhC 1618 top: HCS-3016
n Stacking Kit, HhC 1618 to HhC 2020, HhC 1618 to HhC 2620: HCS-3001
HhC CO
NV
EYOR O
VEN
CA
RTSTM
www.turbochef.comDOC-1157 / Revision F /April 2018 / Page 2 of 2
TurboChef Global Operations 2801 Trade Center DriveCarrollton, Texas 75007 USA