Carson’s Nut - Bolt & Tool Co. The Premier Tool Distributor 621 McGee Rd Unit B Anderson, SC 29625 Ph: 864-622-1080 Fx: 864-622-1086 522 Broadcast Rd Spartanburg, SC 29303 Ph: 864-585-9686 Fx: 864-583-9931 301 Hammett St Ex Greenville, SC 29609 Ph: 864-242-4720 Fx: 864-242-6821 GRINDING WHEEL For Steel and Cast Iron PERFORMANCE LINE SG-ELASTIC: A 24 R SG •Reinforced Grinding Wheels for Steel, Cast Iron: Type 27 (Depressed Center), Type 28 (Saucer) •Performance grinding wheel provides good removal rates and long life for reduced wheel changes. GRINDING/CUTOFF WHEEL - Specialty Line SG-PLUS for Stainless Steel (INOX) - Type 1 (Flat) •Features X-SLIM wheels, which are .030” (0.8 mm) – the thinnest wheel achieveable for the fastest cutting performance and the least material waste. •Manufactured without addition of ferrous, sulphurous or chlorinated fillers. CUT-OFF WHEEL For Steel and Cast Iron PERFORMANCE LINE SG-ELASTIC •Cut-off wheel for Steel, Cast Iron: Type 27 (Depressed Center) •The wide range of wheel shapes meet all demands for efficient cutting. NON-WOVEN ABRASIVES - POLIVLIES™ HAND PADS •The low aggressive characteristics of the polyamide fibres and the positive effect of the abrasive non-woven materials create brilliant smooth finished surfaces. •Designed for light manual grinding, deburring and cleaning work on metals, plastics, fibreglass, reinforced plastics, paint, coatings and fillers. POLIFAN®-CURVE Flap Discs SGP ZIRKON CURVE •Quickly achieve a smooth, consistent surface finish •Tough and aggressive – removes scale and bead from all metals: steel, stainless steel (INOX), aluminum and alloys. •Excellent tool life, including the radius edge of the disc. GRINDING WHEEL For Stainless Steel UNIVERSAL LINE PS-FORTE: A 24 LSF INOX •General purpose grinding wheel for use on all metals. •Smooth grinding action and fast removal rates with minimal contact pressure. •INOX: Manufactured without addition of ferrous, sulphurous or chlorinated fillers. CUT-OFF WHEEL For Stainless Steel SPECIALTY LINE SG-PLUS Steel (INOX) •Top performing cut-off wheels for Stainless Steel provide unparalleled cutting performance and service life. •The range features X-SLIM wheels, which are .030” (0.8 mm)– the thinnest wheel achieveable for the fastest cutting performance. Diameter Thickness Arbor Hole/ Grit Max RPM (inches) (mm) Thread Size 4-1/2 .045 1.6 7/8 A.H. 46 13,300 Diameter Thickness Arbor Hole/ Grit Max RPM (inches) (mm) Thread Size 4-1/2 1/4 7.2 7/8 A.H. 24 13,300 EDP Diameter Thickness Arbor Hole/ Grit Max RPM (inches) (mm) Thread Size 63162 4-1/2 .045 1.6 7/8 A.H. 46 13,300 63164 6 .045 1.6 7/8 A.H. 46 10,200 Diameter Thickness Arbor Hole/ Grit Max RPM (inches) (mm) Thread Size 4-1/2 .045 1.6 7/8 A.H. 46 13,300 Diameter Arbor Hole/ Max RPM Flange Set Thread Size 4-1/2 7/8 A.H. 13,300 EDP 69116/ EDP 69118 GRINDING WHEEL For Stainless Steel PERFORMANCE LINE SG-ELASTIC •As tough and safe as a reinforced grinding wheel and 100% increased aggressiveness •CC-GRIND-SOLID for rough grinding applications. •50% less noise and vibration during use Diameter Thickness Arbor Hole/ Grit Max RPM (inches) (mm) Thread Size 4-1/2 9/16 14 7/8 A.H. 40 13,300 Diameter Thickness Arbor Hole Grit Max RPM (inches) (mm) 4-1/2 .045 1.6 7/8 46 13,300