Care electric energia.english 2

CARE-ELECTRIC TURBINES

Perspective of an installation from up river.

The CARE–ELECTRIC technology is a technological innovation in electric energy

generation and distribution. - It is based on the conception on modulus which allow for different installation combinations.  - The installed capacity depends on the local river conditions and the water flow measured in  m³ / s - Units can be installed close to consumption point in out of the way villages and sites or it can be connected to energy power webs. - The technology is 100% friendly to the environment .

Some of the advantages of the CARE energy generating system.

 - No land is flooded.- No dam is erected and the river flow is not diverted.- River side populations are not removed from their land or homes.- Each unit is equipped with galleries and passages for fish and other river life.- The water as it passes through the blades is intensely oxygenated. - No organic or other material is contained avoiding the creation of gas or blocking the river bed. - No under water fences are installed

Passages for aquatic life.

- Low cost of instalation . - The CARE technology has no restrictions with respect to the environment especially when compared to traditional hydroelectric generating installations . - The cost of manufacturing and installation are significantly less than the cost or investment in a conventional system. Such costs can be less than 50%. Operating costs are also much lower . Units can be totally atomized , controlled and operated by satellite and the net. - Manufacturing time is minimum and can vary from 6 to 12 months between the project stage and the beginning of generation. Basic considerations are the volume to be generated and local conditions.

The following demonstrates the sequence of operations required to position the CARE

turbines in operating position.

1- The hydraulic cylinders are activated to lower the

generating sections .

2- The water rises on the up river side of the unit.

3- The deflector is elevated to provide for more pressure

by the water.

4- The flow doors are opened.

5- Beginning of rotation and generation of energy )

INFORMATION

Belo HorizonteWilson Pierazoli Filho +55 31 – 3361-7885

[email protected]

Rio de JaneiroFrank de Luca +55 21 – 3206-6000

[email protected]

São PauloEdson Figueira +55 11- 3039-8418

[email protected]