This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
• Para curetaje de superficie radicular en bolsas profundas, en zonas aproximales de difícil accesos y estrechas así como en furcaciónes .
• Para eliminación de granulación y concreción (sarro subgingival) y para alisamiento de superficies dientes después de eliminación de brackets , bloqueados o férulas .
•
•
Estos instrumentos de carburo de tungsteno ofrecen una alternativa al tratamiento con curetas. Estos instrumentos proporcionan un alisado radicular con menos formación de estrías en comparación con el uso de curetas
Öko-Cleaner: „Paro-forma” se prestan especialmentepara el pulido de furcaciónes en molares.
Recommendations for use:
• For the curettage of root surfaces in deep pockets,narrow interproximal areas that are difficult to reach as well as furcations.
• For the removal of granulation and concrement(subgingival calculus) and smoothing of tooth surface after removal brackets, blockings and splintings.
• Special developed tungsten carbide instrumentsoffer a real alternative to curette operation.
• The instruments enable gentle root planing and less striae formation compared to the usage of curettes.
Instrucciones de uso – T21XR, T23XR • para fácil eliminación de amalgama y composite•
•
El acabado garantiza una eliminación de material óptima y evita el embozamiento de los instrumentosEliminación del relleno rápida sin aumento de la temperatura.
Recommendations for use – T21XR, T23XR• Easy removal of amalgam and composite.• The special surface finish ensures an ideal material
flow and avoids smeared up instruments.• The removal of fillings happens by gross chips without
increase of temperature.FG
RA
L (mm)
Ø ( 1/10 mm)
REF
100120124,2012
T23XR
FG
RA
L (mm)
Ø ( 1/10 mm)
REF
100120124,2012
T21XR
T23XR (194)T21XR (137)
Revestido con nitruro de titanio /Titanium-Nitride-coated
Carburo de tungsteno / Tungsten Carbide
Fresas de carburo de tungsteno/ Tungsten carbide instruments
46
817
L
L (mm)
grano / gritØ ( 1/10 mm)
REF
0,56
047817
1,06
065817Separación de coronas para
zirconio, cerámica y metal
Diamond coated crown cutter for separating of zircon, all-ceramics and metal
160 .000 min-1160 .000 min-1
L (mm)
grano / gritØ ( 1/10 mm)
REF
6,010
012K880
L (mm)
grano / gritØ ( 1/10 mm)
REF
4,010
012K838
K880K838
160 .000 min-1
160 .000 min-1
• estrecha especial para mecanización rapida y sin problemas de coronas y puentes de todas las aleaciónes
• gran desalojo de viruta para la salida de viruta rapida
•
•
no se ensucian por desprendimiento de virutas de aleaciones auríferas
corte cruzado en la punta de instrumento para una mejor penetración en el material a remover.
• special toothing for quick and easy machiningof crowns and bridges of all common metal alloys
• large chip spaces for quick chip removal
• no smearing during the machiningof gold-bearing alloys
• crossing blade at the instrument tip for betterpenetration into the machine material
FG
L (mm)
Ø ( 1/10 mm)
REF
100123,5012C4X
C4X
160 .000 min-1
– Instrucciones de uso C34, C34L
Para separación de estructuras metálica en coronas cegados y puentes
• óptima geometría de corte• gran capacidad de remoción• baja vibración • larga vida
Recommendations for use
designed for cutting metal crowns and bridge frames• ideal cutting edge geometry• high removal rate• low vibration• high durability
FG
L (mm)
Ø ( 1/10 mm)
REF
100102,1010C34
100122,1012C34
C34 (138)
FG
L (mm)
Ø ( 1/10 mm)
REF
100103,5010
C34 L
100123,5012
C34 L
C34 L (139)
Carburo de tungsteno / Tungsten Carbide
Separación de coronas / Crown cutters
47
FG
RA
L (mm)
Ø ( 1/10 mm)
REF
100140144,6014
H23 R
100160164,9016
H23 R
H23 R (194)
RA = 30 .000 min-1 FG = 160 .000 min-1
30 .000 min-130 .000 min-1
• Para eliminación del adhesivo de brackets despues de retirar los brackets
• El laminado especial elimina el adhesivo sin dañar el diente .
• Los laminados diferente largos facilitan la tramitación de superficies pequeñas y grandes.
• For removing of bracket adhesive after debonding.
• The special toothing removes the adhesive without injuring the tooth.
• Different lengths of toothing facilitate the preparation of small and large areas.
RA
L (mm)
Ø ( 1/10 mm)
REF
100188,0018
CBR1V
RA
L (mm)
Ø ( 1/10 mm)
REF
100165,0016
CBR1S
CBR1V - metal duro full tungsten carbide
CBR1S
Instrucciones de uso – C22 …
• Para eliminación del adhesivo de brackets despues de
• •
retirar los brackets Disponible en tipos de mango FG y RAEl laminado especial elimina el adhesivo sin
.dañar el diente• El chaflán de seguridad al fin del laminado reduce le riesgo de
estrías en la superficie del esmalte .• Los laminados diferente largos facilitan la tramitación de
superficies pequeñas y grandes .• La punta sin laminado evita daños de la gingiva.
Recommendations for use – C22 …
• Designed for removal of bracket adhesive after debonding.• Available as FG and RA shank.• The special toothing removes adhesive without causing damage
to the tooth.• The security chamfer at the toothing end reduces the danger
of striae at the enamel surface.• Different lengths of toothing facilitate the preparation of small
and large areas.• The smooth non-cutting tip assures gentle finishing without
damage to the gingiva.
laminadoinclinado largoslant toothinglong
FGL
RAL
L (mm)
Ø ( 1/10 mm)
REF
100160168,0016
C22SL
C22SL (194)laminadoinclinado slanttoothing
FG
RA
L (mm)
Ø ( 1/10 mm)
REF
100160165,0016
C22S
C22S (194)laminadorectostraight toothing
FG
RA
L (mm)
Ø ( 1/10 mm)
REF
100160165,0016
C22G
C22G (194)
Carburo de tungsteno / Tungsten Carbide
Removedor de adhesivos / Adhesive removers
48
Carburo de tungsteno / Tungsten Carbide
Carburo de tungsteno - Acabados / Tungsten carbide finishing burs
C132 (699)
C246 (495)
C275 (296) C282 (288)
C246L (496) C246UF (495)
C282K (297)
€
€ €
∫ ∫
L
L
L L
L L
L
filos / blades
FG
L (mm)
Ø ( 1/10 mm)
REF
108
0083,0008C132
filos / blades
FG
L (mm)
Ø ( 1/10 mm)
REF
1012
0093,6009C246
10120103,6010
C246
10120123,6012
C246
filos / blades
FG
L (mm)
Ø ( 1/10 mm)
REF
10120107,0010
C275
10120128,0012
C275
filos / blades
FG
L (mm)
Ø ( 1/10 mm)
REF
108
0106,0010
C282
10100126,0012
C282
filos / blades
FG
L (mm)
Ø ( 1/10 mm)
REF
10120125,4012
C246L
filos / blades
FG
L (mm)
Ø ( 1/10 mm)
REF
1030
0093,6009
C246UF
filos / blades
FG
RA
L (mm)
Ø ( 1/10 mm)
REF
10100140146,0014
C282K
49
Resultados más rápidos con dos instrumentos
• procesamiento rapido y efectivo de la preparación de aditamentos de titanio
• diseño redondo de la punta evita la aparición de ángulos en la zona cervical de la preparación
• creación rápida y segura de superficies • elementos de trabajo largos para el diseño perfecto
sin esquinas y bordes incluso en largos aditamentos• El sistema de dos pasos reduce el tiempo de trabajo
en la preparación de aditamentos en clínica y laboratorio
Quicker results with two instruments
• quickly and effectively preparation of titanium abutments
• round form on the tip prevents the creationof angular preparations in the cervical area
• smooth surfaces are produced both quickly and reliablyusing the congruent finishing instruments
• the instruments – long working parts ensure perfect design resultswithout any rough edges, even in the case of long abutments
• the two step system reduces the time and effort with the processing of abutments in practices and laboratories
Carburo de tungsteno - Acabados / Tungsten carbide finishing burs
Carburo de tungsteno / Tungsten Carbide
C284 (290)
C375R (1)
C283 (289) C283K (298)
C284K (299) C297 (158)
C847KR (546)
∫
∫
∫
∫
∫
L
L L
LL
L L
filos / blades
FG
L (mm)
Ø ( 1/10 mm)
REF
101201410,0014
C284
filos / blades
FG
RA
L (mm)
Ø ( 1/10 mm)
REF
1010014
8,0014
C375R
1010016
8,0016
C375R
1010018
8,0018
C375R
1010
0230238,0023
C375R
filos / blades
FG
L (mm)
Ø ( 1/10 mm)
REF
10120108,0010
C283
10120128,0012
C283
10120148,0014
C283
filos / blades
FG
RA
L (mm)
Ø ( 1/10 mm)
REF
10120160168,0016
C283K
1012
0210218,0021
C283K
filos / blades
FG
L (mm)
Ø ( 1/10 mm)
REF
101201610,0016
C284K
101201810,0018
C284K
filos / blades
FG
L (mm)
Ø ( 1/10 mm)
REF
10100128,0012
C297
10100148,0014
C297
filos / blades
FG
L (mm)
Ø ( 1/10 mm)
REF
10
0168,0016
C847KR
50
Carburo de tungsteno / Tungsten Carbide
Carburo de tungsteno - Acabados / Tungsten carbide finishing burs