ø80-145mm ø145-195mm 12.0001 11.0010 13.0001 ALFA ROMEO • ASTON MARTIN • AUDI • AUSTIN • AUTOBIANCHI • BMW • BSA • BENTLEY • BUICK • CADILLAC • CHEVROLET • CHRYSLER • CITROEN • CORVETTE • DAF • DACIA • DAEWOO • DAIHATSU • DODGE • FERRARI • FIAT • FORD • GMC • HONDA • HUMMER • HYUNDAI • INFINITI • IVECO KIA • LDV • LADA • LAMBORGHINI • LANCIA • LAND-ROVER • LEXUS • LINCOLN • LOTUS • MG • MASERATI • MAZDA • MEGA • MERCEDES-BENZ • MINI • MITSUBISHI • MORRIS • NISSAN • BILE • OPEL • PEUGEOT • PLYMOUTH • PONTIAC • PORCHE • RENAUL T • ROLLS-ROYCE • ROVER • SAAB 11.0005 11.0006 80-195mm 80-364mm 80-195mm 80-364mm ø80-120mm ø80-200mm ø90-120mm ø120-140mm 90-140mm 70-167mm CANVIK PLUS €499 Improved version with increased safety Durable safety wire for improved safety. CANVIK PLUS Easy-to-use high quality coil spring compressor CANVIK PLUS is one of the most user-friendly coil spring compressors in the market. The built-in clamp sleeve made from hard-wearing polyurethane makes it safe to clamp the spring compressor in a bench vice. CANVIK PLUS tool case € 559 CANVIK PLUS TOOL CASE All-in-one Sturdy and practical blow molded carry case with inserts designed to fit CANVIK PLUS perfectly. Everything you need in one place. Incl. The large user-friendly and ergonomic adjusting handle makes manual positio- ning of the jaws fast and easy Safe clamping in the bench vice Max Ø17mm Max Load 1800 kg € 9.95 Optional Safety wire for improved safety Max Ø17mm Max Load 1500 kg CANVIK BASIC Competitively priced high quality coil spring compressor CANVIK BASIC is very competitively priced and makes the dismantling of McPherson struts both safer and easier compared to using a traditional tool. CANVIK BASIC € 325 Incl. CANVIK CENTER State-of-the-art coil spring compressor for wishbone/multilink suspension CANVIK CENTER is the only universal coil spring compressor in the market for this kind of suspension with angled, specially designed jaws improving safety and providing maximum functionality. The slim coil spring compressor is also suitable for mounting and dismounting of the rear springs on the most cars. New jaws with improved design for maximum safety Incl. Max Load 1500 kg The design of CANVIK CENTER is very compact, making it possible to use the tool on cars with very small hole in the rear spring control arm down to ø30mm. This makes it one of the only tools in the market capable of handling for instance VW Touran, Citroën C3, Skoda Octavia, and Peugeot 107. The unique safety torque key is specially developed to prevent overload and never previously seen CANVIK CENTER €499 Max Ø17mm NEW
2
Embed
CANVIK - SCANGRIP · ø80-145mm ø145-195mm 12.0001 11.0010 13.0001 ac • alfa romeo • aston martin • audi • austin • autobianchi • bmw • bsa • bentley • buick •
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ø80-145mm
ø145-195mm
12.0001
11.0010
13.0001
AC • ALFA ROMEO • ASTON MARTIN • AUDI • AUSTIN • AUTOBIANCHI • BMW • BSA • BENTLEY • BUICK • CADILLAC • CHEVROLET • CHRYSLER • CITROEN • CORVETTE • DAF • DACIA • DAEWOO • DAIHATSU • DODGE • FERRARI • FIAT • FORD • GMC • HONDA • HUMMER • HYUNDAI • INFINITI • IVECO • • JE• KIA • LDV • LADA • LAMBORGHINI • LANCIA • LAND-ROVER • LEXUS • LINCOLN • LOTUS • MG • MASERATI • MAZDA • MEGA • MERCEDES-BENZ • MINI • MITSUBISHI • MORRIS • NISSAN • BILE • OPEL • PEUGEOT • PLYMOUTH • PONTIAC • PORCHE • RENAUL T • ROLLS-ROYCE • ROVER • SAAB •
11.0005
11.0006
80-195mm
80-3
64m
m
80-195mm
80-3
64m
m
ø80-120mm
ø80-200mm
ø90-120mm
ø120-140mm
90-140mm
70-1
67m
m
CANVIK PLUS €499
Improved version with increased safety Durable safety wire for improved safety.
CANVIK PLUS Easy-to-use high quality coil spring compressor
CANVIK PLUS is one of the most user-friendly coil spring compressors in the market.
The built-in clamp sleeve made from hard-wearing polyurethane makes it safe to clamp the spring compressor in a bench vice.
CANVIK PLUS tool case € 559
CANVIK PLUS TOOL CASE
All-in-one Sturdy and practical blow molded carry case with inserts designed to fit CANVIK PLUS perfectly. Everything you need in one place.
Incl.
The large user-friendly and ergonomic adjusting handle makes manual positio-ning of the jaws fast and easy
Safe clamping in the bench vice
Max Ø17mm
Max Load1800 kg
€ 9.95
Optional Safety wire for improved safety
Max Ø17mm
Max Load 1500 kg
CANVIK BASIC Competitively priced high quality coil spring compressor CANVIK BASIC is very competitively priced and makes the dismantling of McPherson struts both safer and easier compared to using a traditional tool.
CANVIK BASIC € 325
Incl.CANVIK CENTER State-of-the-art coil spring compressor for wishbone/multilink suspension CANVIK CENTER is the only universal coil spring compressor in the market for this kind of suspension with angled, specially designed jaws improving safety and providing maximum functionality.
The slim coil spring compressor is also suitable for mounting and dismounting of the rear springs on the most cars.
New jaws with improved design for maximum safety
Incl.
Max Load1500 kg
The design of CANVIK CENTER is very compact, making it possible to use the tool on cars with very small hole in the rear spring control arm down to ø30mm. This makes it one of the only tools in the market capable of handling for instance VW Touran, Citroën C3, Skoda Octavia, and Peugeot 107.
The unique safety torque key is specially developed to prevent overload and never previously seen
CANVIK CENTER €499
Max Ø17mm
NEW
SPRINGCOMPRESSORS
COIL
CANVIK coil spring compressors - a safe investment
Since 1906, SCANGRIP has been manufacturing hand tools of very high quality for the industrial and automotive sectors.
SCANGRIP is the largest manufacturer of highquality coil spring compressors in Europe.
CANVIK coil spring compressors are used byhundreds of thousands for decades and knownthrough-out the world as high quality, speciali-zed tools designed with the focus on safety and userfriendliness.
In the ongoing development, design and produc-tion of coil spring compressors, SCANGRIP takes advantage of more than 30 years’ experience.
Today, the CANVIK products present a convincing and complete range of innovative tools andsolutions for dismantling springs and struts onall cars with both McPherson, multilink/wishbone suspension.
Recently, SCANGRIP has established itself as Europe´s leading manufacturer of work lights for professionals.
Financially, SCANGRIP is in a very stable and strong position and is triple A rated (AAA = Credit risk zero) .
SCANGRIP’s products are distributed through a woldwide network of professional tool impor-ters, distributors and wholesale dealers.
IN EUROPE
LARGESTMANUFACTURER
49.0
029-
UK-2
020-
1
All prices are gross prices, VAT exclusive and subject to change without notice, errors and omissions excepted.
Your guarantee for quality and safety Dismantling of McPherson struts can be a dangerous opera-tion. It involves extreme forces disengaging the spring and very serious accidents might occur if the right tool is not used with all recommended precautions.
During development and production of the CANVIK coil spring compressors safety is our highest priority and all products are designed to endure extremely high loads.
CANVIK coil spring compressors are carefully tested and manufactured under very strict quality control. Only the very best materials are used to ensure a robust, strong and efficient construction of the tool.
Risky operation - Maximum safety In order to ensure maximum safety the CANVIK coil spring compressors are equipped with a safety pin to prevent overload.
An air ratchet can be used on the spindle. To avoid overload use max. 120 Nm.
The CANVIK CENTER is supplied with a unique safety torque key preventing overload when using an air ratchet.
The load capacity of the CANVIK coil spring compressors exceeds by far the typi-cal requirements of any workshop. A CANVIK coil spring compressor will manage all tasks, ranging from SMART to BMW X5 – and more.
TÜV Approved Safety All CANVIK coil spring compressors are TÜV approved to sustain even extremely high loads (4 times safety factor for all mechanical compressors). The TÜV certi-ficate is the ultimate quality stamp for this kind of products and is acknowledged throughout the world as a guarantee for safety.
An economical solution – even in the long term With the CANVIK coil spring compressors dismantling of springs and struts is both easier and faster and compared to using a traditional tool, they make the operation much faster giving a considerable saving in working hours.
Quality Tools Made in Denmark CANVIK coil spring compressors are manufactured at our own productionfacilities in Denmark by skilled, dedicated personnel. We are therefore proud to mark our products with the quality stamp ”Made in Denmark”.
MAXIMUM SAFETYTo obtain maximum safety and avoid accidents it is very important to use the right size jaws which fits the spring to be handled.
SUPPLEMENTARY JAWS
THE JAWS are easily changed, secu-red with strong bolts, and equipped with a lip locking the spring during compression in order to improve safety. The surface of the jaws is powder coated or with polyurethane supports in order to protect the springs.
10.0010 Standard PLUS jaw with polyurethane insert covering spring diameters of 80-200 mm x € 98.50 each
10.0008 Standard PLUS jaw with polyurethane insert covering spring diameters of 80-120 mm x € 86.00 each
90.0010 Standard BASIC jaw covering spring diameters of 80-145 mm x € 61.00 each
90.0020 Standard BASIC jaw covering spring diameters of 145-195 mm x € 69.00 each
90.0050 Jaw covering spring diameters of 80-120 mm x € 66.90 each
90.0060 Jaw covering conical and ball springs diameters of 80-145 mm x € 83.00 each
To be used in pairs
SPECIAL JAWS
Special coil springs require special jawsFor special requirements we offer a wide range of additional jaws. An updated application car list is available on www.scangrip.com
To be used in pairs
90.0025 ”Counter clock” spring for NISSAN QUASQUAI and HONDA x € 69.00 each
90.0070 For BMW E39, E46, Renault , Megane ll and Toyota Avensis € 159.00 each
90.0075 Special jaw for selected BMW-F models, MINI and Opel Insignia B € 189.00 each
90.0080 For Mercedes C-class - 2008 € 125.00 each
90.0085 Special jaw for Mercedes C-class (W204+205) and E-class (W207) € 175.00 each
90.0090 For Mercedes E-class and Renault Megane ll € 119.00 each
90.0100 For Peugeot Break and Citroën C15 (pair) € 149.00 per pair
90.0110 McPherson shock absorber strut vice ø40-65mm € 299.00 each