TBV™ Corrosion Resistant & Cryogenic Valves TBV™ PROCESS VALVES
Mar 25, 2016
TBV™ Corrosion Resistant & Cryogenic Valves
TBV™
PROCESS VALVES
PROCESS VALVES
PROCESS VALVES
CT-TBV-BALL-CRCV04/10-SWP-3M
TBV™ 3
TBV™ CoRRoSion ReSiSTAnT & CRyogeniC VALVeS
introduction .......................................................................................... 4
instrument Valves ................................................................................. 5
Flanged Ball Valves ............................................................................... 7
Three-Piece Ball Valves .......................................................................... 8
Diverter Valves ...................................................................................... 9
Cryogenic Ball Valves ............................................................................ 10
Special Service ...................................................................................... 12
Check Valves ........................................................................................ 13
instrument installation Details ............................................................... 14
instrument & Process Valves .................................................................. 14
Seat Rating Chart .................................................................................. 15
How to order ....................................................................................... 16
Aftermarket Services ............................................................................. 17
Trademark information ......................................................................... 18
TABLE OF CONTENTS
PROCESS VALVES
CT-TBV-BALL-CRCV04/10-SWP-3M
TBV™4
Cameron’s Valves & Measurement (V&M) group is a leading provider of valves
and measurement systems to the oil and gas industry. The group’s products are
primarily used to control, direct and measure the flow of oil and gas as it is moved
from individual wellheads through flow lines, gathering lines and transmission
systems to refineries, petrochemical plants and industrial centers for processing.
The Process Valves division provides critical service valves for refinery, chemical and
petrochemical processing businesses and for associated storage terminal
applications, particularly through the oRBiT® and geneRAL VALVe® product lines.
oRBiT and geneRAL lines are complimented by WKM® and TBV™ valve products
and expand the scope of this division’s product offerings.
TBV valve products are manufactured and assembled at Cameron’s new facility in
Millbury, Massachusetts. The TBV facility offers 100,000 ft2 of space of which
80,000 ft2 is dedicated to manufacturing, assembling, testing, shipping, and quality
assurance. The increased manufacturing space has afforded Cameron the
opportunity to expand its product offering and size ranges. TBV is now competitive
in the Lng, mining and petrochemical markets with its ability to offer larger size
ranges in its line of products.
Millbury, MA
PROCESS VALVES PROCESS VALVES
CT-TBV-BALL-CRCV04/10-SWP-3M
TBV™ 5
TBV™ CORROSiON RESiSTANT & CRyOgENiC VALVESinSTRuMenT VALVeS
Series 4100
The TBV Series 4100 is an all welded, double female instrument or process
valve which meets APi 607 4th edition fire safe requirements. Standard sizes
include 1/4 in. - 1 in. (8 mm - 25 mm). Material options include all commercially
available alloys.
Series 41/61
The TBV Series 41/61 is an all welded design with one female nPT end and one
male end. The male end is available with screwed, butt weld, socket weld, and
flanged connections. Male and female ends may be different sizes upon
request.
Series 5500
The TBV Series 5500 is a true dual ball block and bleed valve used for primary
isolation – for both instrumentation and process. There are two closure
members on each side of the bleed valve. For the bleed, a standard TBV
instrument ball valve is recommended. non-TBV brands can be utilized for the
bleed, such as needle or gate valves, depending on customer preference. The
Series 5500 is available up through 3” and ASMe 600 pressure class in any
commercially available material.
Series 6100
The TBV Series 6100 is fully rodable and provides three 1/2” female ports with
one male end for attachment to an orifice flange. The TBV Series 6100 allows
for different sized male ends up to 1” in size and is available in a variety
materials. The valve can be installed in pairs on 2 1/8” centers.
Series 61/41/61
The double male end TBV Series 61/41/61 Valve is a natural offshoot of the TBV
Series 4100 which eliminates the need for nipples to be used with female end
valves. The all welded design reduces the number of leak paths and extended
male ends are available upon request.
PROCESS VALVES
CT-TBV-BALL-CRCV04/10-SWP-3M
TBV™6
TBV™ CORROSiON RESiSTANT & CRyOgENiC VALVESinSTRuMenT VALVeS
Series 6400
The TBV Series 6400 Valve includes all of the advanced TBV Ball Valve features
in a fire safe design that meets APi 607 4th edition. The TBV Series 6400 is
available with a variety of seat materials in a carbon steel or stainless forged
body from 1/2” - 1”. other materials are available upon request. The TBV Series
6400 is furnished with one nPT end and allows a choice of nPT, socket weld,
or iReB end connections for the other end. This 1/4 turn ball valve replaces
leaky extended body gate valves in process, block, bleed and drain applications.
Series 6500
The TBV Series 6500 cast body process transmitter valve replaces gate valves
with advanced TBV Ball Valve features in a fire safe design meeting stringent
refinery and chemical plant requirements. The TBV Series 6500 features all
welded tamper proof construction, an internal blow-out proof stem and an oval
safety handle to prevent accidental operation. The unique design of the TBV
Series 6500 incorporates back-up metal fire lips to provide sealing should the
soft seals sublimate in the event of fire and optional graphoil stem seals
ensuring fire safe protection. TBV’s Series 6500 offers reliability, safety, visibility,
unique mounting capability, quality and unsurpassed leakage protection.
Series 6800
The TBV Series 6800 is an instrument valve with a cast body that incorporates
an integral lockout pad and a high performance stem packing. The valve comes
equipped with a locking oval handle as a standard feature. it is seal welded to
prevent tampering or accidental unthreading when removing from the line.
The TBV Series 6800 is fire safe when ordered with appropriate seals, and is fully
rodable. Because of the cast lockout pad, it cannot be turned on 2 1/8” centers.
Series 6900
An instrument valve similar to the TBV Series 6100 Valve, the TBV Series 6900
Valve uses a cast body that incorporates an integral lockout pad and a high
performance stem packing. Like the TBV Series 6100, the TBV Series 6900 is
intended as a gage isolation valve, with tapped nPT side ports for flush and
drain functions. it incorporates all of the other features of the TBV Series 6100
Valve; rodability, fire safety, and seal welding. The valve comes equipped with a
locking oval handle as a standard feature. Because of the cast lockout pad, it
cannot be turned on 2 1/8” centers.
PROCESS VALVES PROCESS VALVES
CT-TBV-BALL-CRCV04/10-SWP-3M
TBV™ 7
TBV™ CORROSiON RESiSTANT & CRyOgENiC VALVESFLAngeD BALL VALVeS
Series 2000
The TBV Series 2000 is a uniquely designed, reduced port flanged ball valve
offering unlimited versatility with respect to materials, features, and modifiers
to satisfy today’s sophisticated process valve requirements. Where corrosion,
high temperatures, slurries, and flow control applications are to be met, the
TBV Series 2000 is a clear choice. The valve body is designed to facilitate ease
of automation by including both iSo and flange boss mounting capabilities as
standard. The TBV Series 2000 is available in 1/2” - 8”, ASMe 150, 300.
Valve safety is also addressed by utilizing the standard blow-out proof stem
design in conjunction with optional features such as oval safety handle for sizes
up to 1 1/2”, lock-out device, fugitive emission and bellows seal bonnets. They
are designed to comply with the fire safe standards of major oil refineries and
APi 607. As with all TBV Valves, quality, flexibility, long service life, and safety
make this valve the best choice for integrity and application satisfaction.
Series 1800
The TBV Series 1800 Flanged Valve, available in standard or full port design, is a
high integrity two-piece design. The leak proof design is enhanced through the
use of an optional high performance bonnet which eliminates all possibility of
release of toxic media. The TBV Series 1800 also provides a stop plate with
open/closed indication and a tapped actuator mounting plate which allows
actuator installation without disturbing the stem packing. This unique design
allows the valve to be manufactured from bar stock, thereby maintaining
flexibility of manufacture. it is available from 1/2” to 10” in a variety of body
and seat materials with ASMe 150 - 1500 flanges.
Series FE2000 and Series FE1800
The TBV Series Fe2000 and TBV Series Fe1800 Valves incorporate all of the
features of the TBV Series 2000 and TBV Series 1800 Flange Valves, plus the
ability to be used in critical applications where handling of toxic emissions is
required. The bonnet is welded to the valve body eliminating a potential leak
path, utilizing either double chevron or wedge packing with lantern ring,
optional monitoring, leak off port, and maintenance free-extended cycle life.
Finally, our unique live loaded floating stem design preserves the Fe seal
integrity even in fire safe applications. The valve is available in 1/2” to 8”sizes
for the TBV Series Fe2000 and 1/2” to 10” sizes for the TBV Series Fe1800.FE1800FE2000
PROCESS VALVES
CT-TBV-BALL-CRCV04/10-SWP-3M
TBV™8
TBV™ CORROSiON RESiSTANT & CRyOgENiC VALVESFLAngeD BALL VALVeS
Series 2800
The TBV Series 2800 Two-Piece, cast full port flanged ball valve is specifically
designed to tackle severe service applications. This design includes a “Live
Loaded” dual stem seal (primary and secondary seal) as standard. The body
and bonnet are cast as a single piece with no welds or crevices. The TBV Series
2800 is available from 1” to 8” with ASMe 150 - 300 flanges (3”- 8” ASMe
600 available). Materials include cast stainless steel, monel, hastelloy, alloy 20,
nickel and others as required.
Series 3300
An enhanced version of the TBV Series 1800, the TBV Series 3300 is suited for
highly corrosive and erosive applications. Design includes a secured
downstream seat, spring loaded upstream seat and enhanced ball / stem
engagement. This valve is manufactured from barstock from any commercially
available material. it is available from 1” to 14” ASMe 150 - 1500.
Series 1100
Along with all of the features and versatility of a three-piece valve, the TBV
Series 1100 Valve incorporates a raised face on the seat bearing side of the
endplate which assures positive alignment of the components and positive
preset. The body seal is 100% enclosed, extending the temperature range of
virgin TFe. Rugged construction features a heavy duty handle and stop plate,
and oversize body bolts with a variety of material options. The TBV Series 1100
is 1500 Wog rated and is available in a wide variety of materials with nPT,
socket weld, butt weld, and flanged end connections in 1/4” through 10”
sizes. other special end connections are available upon request.
Series 3100
The TBV Series 3100 Wafer Three-Piece Valve combines the benefits of a
standard three piece with additional wafer features. The three-piece design
utilizes raised face end plates to ensure correct alignment with the body, totally
encapsulated body seals, and a bottom entry blow-out proof stem. The wafer
configuration provides additional benefits, including reduction of the material
mass of the valve and lower cost. The TBV Series 3100 can be used between
ASMe 150 - 600 flanges with a 1500 psi pressure rating and is available from
1/2” - 8” in a wide variety of alloys.
THRee-PieCe BALL VALVeS
PROCESS VALVES PROCESS VALVES
CT-TBV-BALL-CRCV04/10-SWP-3M
TBV™ 9
TBV™ CORROSiON RESiSTANT & CRyOgENiC VALVESDiVeRTeR VALVeS
Series 5100 (fabricated from a Series 1100)
TBV offers the Series 5100 Diverter Valve to accomplish what would otherwise
require two or more two-way valves. The diverter valve utilizes all of the
benefits of the two-way, three-piece TBV valve: a blow-out proof stem, raised
face end plates to eliminate radial piping stresses that could cause body seal
leakage, a wide variety of seals, and a large selection of end connections. The
TBV Series 5100 is also available in either a diverter or a three-way format with
bottom or side porting, and for 90° or 180° operation, from 1/4” through 6”,
making it valuable for a multitude of applications.
Four-Way
TBV’s Four-Way Valve is manufactured to our highest standards for use where
several two-way valves would otherwise be needed. it is available in a wide
array of flow patterns utilizing an L port, a T port or a double L ball. Four seats
ensure leak tight sealing. The four-way can be produced in a large variety of
body and seat materials from 1/2” - 6” and is available with screwed, socket
weld, butt weld or flanged end connections. Consult factory for specific
application.
Series 51/20 (fabricated from a Series 2000)
The TBV Series 51/20 Flanged, unibody Diverter Valve is an integrally flange
design for use in applications which would normally require two or more
two-way valves. it is available with side or bottom porting in 90° or 180°
operation. The 90º operation allows diverting from the bottom or side port to
either of the other two ports with a 90° turn of the handle, but the flow can
never be shut-off. The 180° operation allows diverting with a 180° turn of the
handle and flow can be shut-off at the 90° position. The TBV Series 51/20 is
available from 1/2” to 8” with ASMe 150 - 300 flanges and in a variety of alloys.
PROCESS VALVES
CT-TBV-BALL-CRCV04/10-SWP-3M
TBV™10
TBV™ CORROSiON RESiSTANT & CRyOgENiC VALVESCRyogeniC BALL VALVeS
Series 2100 (fabricated from a Series 1100)
The unique design of TBV’s Series 2100 Three-Piece Cryogenic Valve
incorporates features that provide long life, safety and low torque. The high
strength, blowout proof stem is used in conjunction with an all welded
extended bonnet and a five chevron V-Ring packing to provide leak proof stem
seal integrity, as well as providing live loaded self-adjustment. TBV’s specially
designed and formulated Cryofil seats provide low operating torque at
cryogenic temperatures. The TBV Series 2100 has a temperature rating down to
-452°F and is available up to ASMe 1500. it is available in 316L stainless steel,
brass and other commercially available materials with nPT, socket weld, butt
weld or ASMe 150 - 1500 flanged end connections, in 1/4” through 8” sizes.
For applications such as vent and bleed lines or intermittent cryogenic service,
TBV offers the non-extended stem. This valve incorporates all of the unique
features of our standard TBV Series 2100 Cryogenic Ball Valve.
Series 21/18, 21/20 and 21/28 Flanged Cryogenic Valves
TBV Flanged Cryogenic Valves provide chatter free operation down to -452°F
through the use of our exclusively formulated Cryofil seat. The integrity of the
valve is further enhanced by the all welded bonnet design and upstream cavity
relief. The stem is blowout proof and self adjusting to wear and pressure due to
live loading. The standard body materials are 316L Stainless Steel and are
available with ASMe 150-1500 flanges, model dependent, in ½” through 8”
sizes.
Series 21/20Series 21/18 Series 21/28
PROCESS VALVES PROCESS VALVES
CT-TBV-BALL-CRCV04/10-SWP-3M
TBV™ 11
TBV™ CORROSiON RESiSTANT & CRyOgENiC VALVESCRyogeniC BALL VALVeS
Series 21/80
The TBV Series 21/80 is the large bore (10” – 16”), cryogenic valve available
from ASMe 150 through 900. This series of valve is full port, trunnion, split
body design. The valve is low temperature tested per Bechtel 3PS-PV00-F0001
and Chevron, specification for testing requirements for qualification of valves in
low temperature and cryogenic service.
Series 21/51 (fabricated from a Series 1100)
The TBV Series 21/51 Cryogenic Diverter incorporates all features found in the
TBV Series 2100 and provides diverting capabilities for use where two or more
two-way valves would normally be necessary, specifically in dual safety relief.
The TBV Series 21/51 is available in two porting arrangements: 90° operation
and 180° operation. The 90° operation allows flow from a bottom port to be
diverted to either of two outlet ports over a 90° turn of the handle, but can
never shut-off the flow. The 180° operation also diverts a flow from the bottom
port to either of two outlet ports, but uses a 180° turn of the handle, allowing
the flow to be shut-off completely at the 90° position.
The TBV Series 21/51 is available in full port or standard port from 1/2” through
8”, in 316L stainless or brass, with or without an extended stem. Screw ends,
socket weld ends, butt weld ends or ASMe 150 - 600 flanged ends are also
available.
Series 21/51A
The TBV Series 21/51A High Flow Cryogenic Diverter Valve Assembly for dual
safety relief systems is designed to meet the high flow requirements of
stationary cryogenic containers. This valve features foolproof 180° operation,
provides positive porting with consistently high Cv during transfer and is
suitable for tank pressures to 600 psi. The TBV Series 21/51A combines TBV’s
compact, modular design virtually eliminating the necessity of costly field
fabrication.
PROCESS VALVES
CT-TBV-BALL-CRCV04/10-SWP-3M
TBV™12
TBV™ CORROSiON RESiSTANT & CRyOgENiC VALVESSPeCiAL SeRViCe
Actuation and Gear Operators
TBV’s pneumatic and electric actuation packages compliment our complete valve
line. Pneumatic actuation is available with spring return or double acting. electric
actuation includes all standard voltages. TBV can provide a total control package
including limit switches and positioners to meet customer requirements.
Oxygen Service
TBV Valves are commonly applied on oxygen service in either the liquid
(cryogenic) or gaseous phase. Because of the danger of oxygen reacting
explosively with any grease, oil or combustible material left in the piping system,
TBV Valves provided for oxygen service are:
• inspected for chips, burrs, foreign matter and any other defects
in workmanship
• Cleaned and degreased prior to assembly
• All tools and handling apparatus degreased as above
• Purged and dried with filtered, non-lubricated air
• Seats and seals are lubricated with an oxygen compatible lubricant
(Fluorolube) on gaseous o2 valves. Cryogenic valves are not lubricated
• Black light inspected before assembly
• Assembled, tested and air dried in a “Clean” room
• Capped on each end
• Tagged “Cleaned for oxygen Service”
• Poly bagged and sealed closed
• Complies with Praxair Standard gS-38
Chlorine Service
For the handling of chorine compounds, TBV has developed special designs to
withstand these harsh applications. TBV Chlorine Valves feature inconel Belleville
loaded stem seals for automatic compensation of temperature and pressure
fluctuations, an upstream pressure relief hole in the ball or a slotted upstream
end plate to allow expanding chlorine to escape harmlessly upstream, and a wide
variety of available materials to suit each individual application. TBV
Chlorine Valves are assembled, cleaned and bagged following the
recommendations of the Chlorine institute Pamphlet 6. The chlorine service
option is available for all of TBV’s Ball Valves and can be tailored to fit any
application.
PROCESS VALVES PROCESS VALVES
CT-TBV-BALL-CRCV04/10-SWP-3M
TBV™ 13
FE Bonnet for High Performance
For critical applications in which leakage of toxic or volatile organic compounds
cannot be tolerated, TBV provides the fugitive emissions bonnet. The bonnet
utilizes a unique design in which the stem packing is live loaded between the
threads on the top of the stem and a shoulder on the stem, rather than a
shoulder in the packing box. Through this floating stem design, TBV has
eliminated the effect of temperature cycles on the packing arrangement. The
packing consists of a stack of up to ten chevron v-ring sandwiched between
top and bottom adapter rings, or wedge style packing and can be modified to
accept a leak off with a lantern ring. This unique design has been proven in
hundreds of installations in services including phosgene and chlorine. Available
for our entire ball valve line with an optional fire safe version, this fully welded
or integrally cast bonnet can be used with any valve series in any configuration
to prevent the release of dangerous media.
1/4 Turn Bellows Seal
This product line demonstrates the utmost in sealing capabilities (zero leakage)
for processes involving volatile organic compounds. Available on most TBV
Valves, the ASMe 300 is uniquely designed for endurance, and backup
secondary standard sealing as well as all welded integrity. A standard mounting
plate allows automation with linear or 90° electrical and pneumatic actuators.
Series 7100
The TBV Series 7100 Swing Check Valve utilizes our special toggle arm and disc
arrangement. This valve is available with integral metal seats. The TBV Series
7300 Wafer Swing Check Valve can be supplied for use with all ASMe flanges
up to ASMe 600 as standard. Both the TBV Series 7100 Swing Check and the
TBV Series 7300 Wafer Swing Check Valves are available in sizes ranging from
2” through 8”.
Series 9100
TBV’s Series 9100 Ball Check is available from 1/2” to 2” in a wide variety of
material choices such as stainless, monel, hastelloy and titanium. TBV can
provide the TBV Series 9100 with all available end connections including socket
weld, butt weld, screw end or ASMe 150 - 900 flanged ends. The TBV Series
9100 is controlled by back pressure and can be supplied with a spring set
calibrated from 5-25 psi.
TBV™ CORROSiON RESiSTANT & CRyOgENiC VALVESSeVeRe SeRViCe
CHeCK VALVeS
PROCESS VALVES
CT-TBV-BALL-CRCV04/10-SWP-3M
TBV™14
TBV™ CORROSiON RESiSTANT & CRyOgENiC VALVESinSTRuMenT inSTALLATion DeTAiLS
TBV’s instrument installation details combine optimum measurement technology, proven mounting practices (close coupling)
and hardware integration to produce not only the specified .075 or .05% accuracy and zero stability, but a low installed cost
unequalled in performance and constructability. This system can reduce installation costs by modularizing, pre-engineering,
pre-fabricating, and locking in the optimum transmitter installation in a tamper-proof, foolproof system that guarantees the
rated performance of the transmitter, while lowering the installed cost per instrument loop by 30 to 80%.
inSTRuMenT & PRoCeSS VALVeS
TBV instrument Valves were developed in response to
concerns expressed by plant engineers. Common
problems such as center-to-center spacing in DP
installations, visual position indication, plunging of
impulse lines and tamper proofing have been eliminated
in our instrument valve line. The center-to-center spacing
problem arises in competitive designs since the bonnet
must be removed from the body in order to screw the
valve into the orifice flange next to another valve. TBV
has solved this problem since our instrument valves can
be installed on 2 1/8” centers* by simply removing the
mating valve handle, leaving the valve’s factory integrity
intact.
Visual position indication is achieved through the use of
an oval safety handle. This handle allows easy position
identification while maintaining safety. These tamper-
proof valves incorporate additional safety through a full
penetration, all welded design which assures that the
body parts can never be separated. Standard valves have
been subjected to bending loads exceeding 27,000 lbs.
without weld failure.
To avoid plunging of impulse lines, all of TBV’s
instrument Valves are fully rodable. The bore through
the ball and seats is larger than the body bore. This
failure prevents accidental damage to the ball or seats
during the rodding operation. TBV’s Ball Valves are
available in any commercially produced alloy. in fact, we
regularly produce valves in Alloy 20, Monel, Hastelloy
C22, Hastelloy C276, 316L Stainless, Titanium,
Zirconium and more. TBV can also accommodate the
entire spectrum of end connections on our instrument
product line. All are available with threaded, socket
weld, butt weld or flanged end connections and all can
be ordered as fire safe.
*With exception of the TBV Series 6800 + 6900.
Flow Applications Pressure Applications Level Applications
PROCESS VALVES PROCESS VALVES
CT-TBV-BALL-CRCV04/10-SWP-3M
TBV™ 15
TBV™ CORROSiON RESiSTANT & CRyOgENiC VALVESSeAT RATing CHART
psig (BAR)
4000 (276)
3500 (241)
3300 (207)
2500 (172)
2000 (138)
1500 (103)
1000 (69)
500 (34)
0 (0)
°F 0 100 200 300 400 500 600 700 800 900 1000 1100°C (-18) (38) (93) (149) (204) (260) (316) (371) (427) (482) (538) (593)
TEMPERATURE °F (°C)
PRES
SUR
E p
sig
(B
AR
)
extended pressures and temperatures may be achieved by altering design for specific applications.
Consult factory with service conditions.
Seat Material identification Code
T-Virgin PTFe White
g-Reinforced PTFe White (Red speckles)
u-ultrafil Black
C-Cryofil* White (identifying groove)
F-Thermafil (PeeK) Light Brown
P-u.H.M.W.P. Translucent White
D-Delrin Dark Brown
K-CTFe Translucent
M-Metal Silver
H-graphite Black
graphite and metal seats are available for services up to 1000°F, at varying pressures, dependant on media and service
conditions. Consult factory for specific rating.
* Registered Trademark of TBV.
extended pressures and temperatures may be achieved by altering designs for specific applications. Consult factory with
service conditions.
Metal
Thermafil
Delrin AFKel-F
UHMW Polyethelyne
Glass Filled PTFE
Virgin PTFE
Ultrafil
PROCESS VALVES
CT-TBV-BALL-CRCV04/10-SWP-3M
TBV™16
TBV™ CORROSiON RESiSTANT & CRyOgENiC VALVESHoW To oRDeR
* For valves with different end connections indicate upstream (first), downstream (second).** Special O.D. Wall Thickness and Length.
01 = 1/8”02 = 1/4”03 = 3/8”05 = 1/2”07 = 3/4”10 = 1”12 = 1 1/4”15 = 1 1/2”17 = 1” x 3/4”20 = 2”21 = 2” x 1”23 = 1/4” x 3/8”25 = 2 1/2”30 = 3”32 = 3/8” x 1/4”35 = 3 1/2”40 = 4”51 = 1/2” x 1”52 = 1/2” x 1/4”57 = 1/2” x 3/4”60 = 6”71 = 3/4” x 1”75 = 3/4” x 1/2”80 = 8”X0 = 10”X2 = 12”X4 = 14”X6 = 16”1A = 1” x 1/2”2A = 1/4” x 1/2”
S = Standard PortF = Full Port
11 = 1100-3 Piece16 = 1600-Tank Bottom18 = 1800-2 Piece
ASMe Flange20 = 2000-unibody
Flange21 = 2100-Cryogenic2B = 21/20-Cryogenic
unibody Flanged2C = 21/31 Cryogenic
Wafer2D = 21/51 Cryogenic
Diverter2F = 21/51/20
Cryogenic unibody Flanged Diverter
2g = 21/18-Cryogenic 2-piece ASMe Flanged
2H = 21/61 Series Cryo2K = 21/65 Series Cryo2L = 21/64 Series Cryo2P = 21/51/18 Split
body Flanged Cryogenic Diverter
2R = Switching Diverter non-extended Stem - Bottom Port
2S = Switching Diverter extended Stem - Side Port
2T = Switching Diverter non-extended Stem - Side Port
2V = Cryogenic 28002W = Cryogenic Large
Bore, Split Body28 = 2800-Cast Full Port31 = 3100-Wafer32 = 3200-Steam “Let
Down”33 = Severe Service
Valve3L = 3100L-Lugged
Wafer41 = 4100-Welded43 = 4300-Welded w /
ds Relief on Ball46 = 41/61-Male end
4100 unibody50 = 51/20-Diverter
unibody Flanged51 = 5100-Diverter53 = 51/18 Diverter61 = 6100-orifice Tap
gauge66 = 61/41/61-Double
Male end All Welded
71 = 7100-Swing Check73 = 71/31-Wafer
Swing Check91 = 9100-Ball Check
BWT = Buttweld ext. & Tube ends**
B_ = Buttweld + Schedule
(B40 = Schedule 40)CPe = CPi endsFSe = nPT Female ThreadFSW = Female Socket
WeldgRe = graylok endsMFD = Manifold
ConnectionMLS = Metal SealMSe = nPT Male ThreadMST = Straight Thread
with o-RingMSW= Male Socket WeldMWe = Male Weld endSoe = o.D. Tube end
Socket WeldSPL = SpecialTCe = Ladish endTe_ = Tube end (K,L,M) Socket Weld une = union end150 = ASMe 150 Flng RF15L = ASMe150 Lap Joint Flanged15R = ASMe 150 RTJ300 = ASMe 300 Flng RF30L = ASMe 300 Lap
Joint Flanged30R = ASMe 300 RTJ600 = ASMe 600 Flng RF60R = ASMe 600 RTJ900 = ASMe 900 Flng RF005 = ASMe 1500 Flng
RF 05R = ASMe 1500 RTJ
0 = iReB1 = MSe2 = MSW3 = FSe4 = FSW5 = i-Flange6 = BW807 = BW408 = BW1609 = i-Flange neutral
eXAMPLe: 1 x 3 = MSe X FSe
A2 = Alloy 20AL = AluminumBR = BrassCS = Carbon
SteelD1 = Duplex
Stainless unS-32550
D2 = Duplex Stainless unS-32750
DS = Duplex Stainless AL6Xn
HB = Hastelloy BHC = Hastelloy CH3 = Hastelloy
B-3H2 = Hastelloy
C-22in = inconeliy = incoloyLC = LCB
Carbon Steel
M4 = Monel 400M5 = Monel
K500n2 = nickel 200 T2 = Titanium
gr 2T5 = Titanium
gr 5T7 = Titanium
gr 7T12 = Titanium
gr 12Tn = TantalumZR = Zirconium34 = 304 SS36 = 316 SS37 = 317 SS4L = 304L SS6L = 316L SS
B = ASTM A193 B7M x A194 7M
C = ASTM A193 B8 CL2 x A194 gr 8
D = Alloy 20e = ASTM A193B8
CL1 x A194 gr 8FF = ASTM A540 B21 x
A194 gr 2Hg = ASTM A320 L7 x
A194 gr 4H = inconel 718J = 410SS A193 gr
B6K = 304L SSL = Hastelloy B2M = Monel 400n = ASTM A320 gr
B8PQ = A193 gr B8 x
ASTM A194 gr 8W = All Welded0 = none1 = Carbon Steel2 = 300 SS3 = ASTM A193 B7 x
A194 2H4 = ASTM A193 B8M
x A194 8M5 = Monel K-5006 = Hastelloy C7 = 316 SS8 = gr 5 Titanium9 = HAST C-276
01 = 90° operation (Diverter Valve)
02 = 180° operation (Diverter Valve)
04 = 4 SeatedAH = Act. Prep w/std
HandleAi = Act. installedAP = Prepared for
ActuationBS = Bellows SealCA = Cutaway SampleCB = enclosed BoltingCD = Cleaned and
DegreasedCS = Crusher SeatsCF = Cavity FillerCL = Chlorine CleaningeB = extended Bonnetee = extended endseP = electro PolisheS = extended StemFe = Fugitive emissions
BonnetFL = Fire LipFS = Fire Safego = gear operatorgS = grounding SpringHF = Hydro-Fluoric ServiceHP = High PressureLg = Locking gear
operatorLH = Locking Handle Lo = Locking oval HandleLR = Lantern RingLS = locking SS oval
HandleLV = Lever HandleM1 = 15° Control SeatM3 = 30° Control SeatM6 = 60° Control SeatM9 = 90° Control Seatne = non-extentedoH = oval HandleoS = Stainless Steel oval
HandleoX = oxygen CleanedPC = Phosgene CleanedPM = Panel MountedRS = Self Relieving SeatsSJ = Steam JacketSL = Spring Loaded/9100SP = Side Port/5100SR = Spring Return HandleTR = TrunnionVB = Vented BallVS = Vacuum ServiceW1 = Spiral Wound Body
Seal W2 = Spiral Wound Body
Seal 316S grafoilW3 = Spiral Wound Body
Seal Ti gr2 TFeW4 = Spiral Wound Body
Ti gr 2 grafoilW5 = Spiral Wound Body
gasket Hast C grafoil
A = Arlon 1555 PeeK
B = BunaC = CryofilD = Delrin AFe = e.P.R.F = Thermafilg = 15% gF TFeH = grafoil/graphiteK = CTFeL = VespelM = Metaln = nylonP = uHMWPQ = e.P.D.M.S = StelliteT = Virgin TFeu = ultrafil 25V = Viton1 = Tefzel2 = Kalrex3 = PFA4 = FeP5 = ertelyte
(CeRTAin CoMBinATionS noT AVAiLABLe)
VALVE SPECiFiCATiON CHART
Size Porting SeriesEnd
ConnectionsBody / End Material*
Ball / Stem Material
Seat / Seal Material
Bolting Modifiers
for mixed combination
of end plates
PROCESS VALVES PROCESS VALVES
CT-TBV-BALL-CRCV04/10-SWP-3M
TBV™ 17
CERTiFiCATiONS
AFTERMARKET SERViCES
Aftermarket Services• Supplies replacement valves and parts:
– Maintains a full inventory of new and
reconditioned valves for immediate delivery
– Provides factory warranty support for all
Cameron oeM brands as well as service for most
other valves
• Field Service & Technical Support
– Field service technicians on call 24 hours a day
7 days a week to handle service issues wherever
they arise
– Provides equipment installation, field repairs, as
well as track and perform scheduled
maintenance
• Customer Property Repair
– The Customer Property Repair program allows
Cameron valve customers to store assets at our
service centers throughout the world
– Valves tracked in electronic database accessible
through the internet
• Remanufactured Products
– offers a broad range of APi-compliant
reconditioned equipment with fast delivery
• Total Valve Management
– Supply and service automation and control
packages
– Assist with valve installation, commissioning and
start-up
Cameron’s Aftermarket Services’ goal is to help our
customers lower the total cost of valve ownership. To that
end we offer a full range of services from over twenty-five
Service Centers worldwide and can provide experienced
personnel trained to meet the specific service requirements
of each valve type.
PROCESS VALVES
CT-TBV-BALL-CRCV04/10-SWP-3M
TBV™18
TRADEMARK iNFORMATiON
TBV™ is a registered trademark which is owned by Cameron.
This document contains references to registered trademarks or product designations,
which are not owned by Cameron.
Trademark owner
DELRIN E.I. DuPont De Nemours & Company
HASTELLOy Haynes International, Inc.
INCONEL INCO Nickel sales, Inc.
MONEL INCO Alloys International, Inc.
PEEK Vitrex PLC Corp United Kingdom
TEFLON E.I. DuPont De Nemours & Company
VITON E.I. DuPont De Nemours & Company
PROCESS VALVES PROCESS VALVES
VALVES & MEASUREMENT3250 Briarpark Drive, Suite 300Houston, TX 77042USA Toll 800 323 9160
For the most current contact and location information go to: www.c-a-m.com
© Cameron Printed in USA 04/10-SWP-3M CT-TBV-BALL-CRCV
PROCESS VALVES