CameraLink SELECTOR / DISTRIBUTOR / REPEATER This unit works as a digital signal selector (also available as a distributor or a repeater) for 2 devices which is compliant with CameraLink Base Configuration standard. When using as a selector, image processing board can be used efficiently by switching input depend on devices. As a distributor, parallel processing by 2 distributing output is available when setting in image processing system. Overview Features MODE and SELECT of input panel - For control signal(CC1-CC4) and Communication Line(SerTFG,Ser TC) specified with CameraLink Base Configuration, input/output can be changed by the switch on input panel. Switching by external control signal is also available. - Providing pre-emphasis function to improve signal jitter. It can be used as a repeater to extend CameraLink cable. MODE D=Distributor R=Repeater S=Selector SELECT MODE=S A - LED lights green and INPUT A is selected. B - LED lights umber and INPUT B is selected. MODE=D A - LED lights green and CC1-CC4 of OUTPUT A and SERTC,SERFG are selected and connected. B - LED lights umber and OUTPUT B is selected.
2
Embed
CameraLink SELECTOR / DISTRIBUTOR / REPEATER · 2011. 7. 12. · CameraLink SELECTOR / DISTRIBUTOR / REPEATER This unit works as a digital signal selector (also available as a distributor
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CameraLink SELECTOR / DISTRIBUTOR / REPEATER
This unit works as a digital signal selector (also available as a distributor or a repeater) for 2 devices which is compliant with CameraLink Base Configurationstandard. When using as a selector, image processing board can be used efficiently by switching input depend on devices. As a distributor, parallel processing by 2 distributing output is available when setting in image processing system.
Overview
Features
MODE and SELECT of input panel
- For control signal(CC1-CC4) and Communication Line(SerTFG,Ser TC) specified with CameraLink Base Configuration, input/output can be changed by the switch on input panel. Switching by external control signal is also available.- Providing pre-emphasis function to improve signal jitter. It can be used as a repeater to extend CameraLink cable.
MODED=Distributor R=RepeaterS=Selector
SELECTMODE=SA - LED lights green and INPUT A is selected.B - LED lights umber and INPUT B is selected.MODE=DA - LED lights green and CC1-CC4 of OUTPUT A and SERTC,SERFG are selected and connected.B - LED lights umber and OUTPUT B is selected.
Switch MODE to use as a distributor, a repeater or a selector.
Distributor modeDistributor
SelectorSelector mode
* Product appearance and specifications are subject to change without notice.
CLSD-650
画像処理ボードCameraLink compatible camera
System connection example
RepeaterRepeater mode
CLSD-650Image processing device
Image processing device
Image processing device
CameraLink compatible cable
CameraLink compatible cable
CameraLink compatible cable
CameraLink compatible cable
CameraLink compatible camera
CLSD-650
CameraLink compatible camera
CameraLink compatible cable
CameraLink compatible cable
PEM (Pre emphasis) Improve jitter of signal.3 staged level change.Activate when extend cable length.
DC 5V IN
REMOTEWhen SELECT SW is in the center(LED=red light),INPUT A,B is selectable by control signal. When MODE is D, CC1-CC4 of OUTPUT A,B and SERTC,SERFG is selectable by control signal.