04/2003 Cam Slide Units 2 · 16726· 2000· 1 Art.-Nr. 2.2902.01.0203.01000
2 .
1167
28.
2001
. 2
�
3
Contents
Horizontal Cam Slide Unit BAK-Standard pages 5 - 31
Horizontal Cam Slide Unit, Standard pages 33 - 59Horizontal Cam Slide Unit, part assembled
Flying Cam Slide Unit, Standard pages 61 - 101Flying Cam Slide Unit, full assembledwith Gas spring
Slope Cam Slide Unit, Standard pages 103 - 123Slope Cam Slide Unit, part assembled
FIBRO – The latest technology – with a tradition of service pages 124 - 125
Note:
Please visit fibro.partserver.de for CAD data regarding horizontal cam slide units and cam slide units suspended from above.Application-independent CAD formats are available on CD-ROM upon request.
subject to alterations
4
2 .
1672
9.
2001
. 1
�
Please request your catalogue
Hydraulic Cam System
Roller Slide Units
subject to alterations
7
2 .
1673
2.
2001
. 1
�
Horizontal Cam Slide Unit (BAK-Standard)
� STANDARDISED WEAR PARTS – BRONZE WITH EMBEDDED SOLID LUBRICANT
� SLIDER RETRACTION BY GAS SPRINGS – EASY TO ASSEMBLE
� INCREASED CONTACT SURFACE BETWEEN SLIDER AND BED
� SLIDER MATERIAL GGG 60
� SHOULDERED SLIDER AND DRIVER
� CLEARANCE OF DRIVER 0,03 mm
� TO ASSIST ASSEMBLY; ALL UNITS HAVE DOWEL LOCATION HOLES
Note: Please visit fibro.partserver.de for CAD data regarding horizontal cam slide unitsand cam slide units suspended from above.Application-independent CAD formats are available on CD-ROM upon request.
max. max. rating installation dimensionslide nominal Tool face return (working attitude)stroke force width height springs weight cata-
width height length logueOrder No [mm] [kN] [mm] [mm] [kN] [mm] [mm] [mm] [kg] page
2016.12.00.065.040.2 40 175,5 65 90 2,5 134 161 200 19 8 - 9.060.2 60 175,5 2,7 230 21 10 - 11.080.2 80 224,3 115 186 265 29 12 - 13.100.2 100 263,3 135 207 305 38 14 - 15
2016.12.00.100.040.2 40 270 100 90 2,5 185 161 200 31 16 - 17.060.2 60 270 2,7 230 36 18 - 19.080.2 80 345 115 186 265 43 20 - 21.100.2 100 405 135 207 305 56 22 - 23
2016.12.00.150.040.2 40 405 150 90 2,5 260 161 205 39 24 - 25.060.2 60 405 2,7 235 43 26 - 27.080.2 80 517,5 115 186 270 61 28 - 29.100.2 100 607,5 135 207 310 78 30 - 31
subject to alterations
8
2 .
1673
3.
2001
. 1
�
2016.12.00.065.040.2
Reference surface
stroke 40
47.6
7(p
ress
str
oke)
subject to alterations
9
2 .
1673
4.
2001
. 1
�
slider stroke: 40 mmmax. driver force: 175,5 kNspring restoring force: 2,5 kN
part piece amount Designation1 1 piece slider2 1 piece driver3 1 piece slider bed4 1 piece retaining gib5 1 piece stop plate6 1 piece sliding pads7 1 piece sliding pads8 2 piece flat guide bar9 2 piece flat guide bar
10 1 piece gas spring
Horizontal Cam Slide UnitBAK-Standard
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
10
2 .
1673
5.
2001
. 1
�
2016.12.00.065.060.2
Referencesurface
72.5
1(p
ress
str
oke)
stroke 60
subject to alterations
11
2 .
1673
6.
2001
. 1
�
slider stroke: 60 mmmax. driver force: 175,5 kNspring restoring force: 2,7 kN
part Piece amount Designation1 1 piece slider2 1 piece driver3 1 piece slider bed4 2 piece retaining gib5 1 piece stop plate6 1 piece sliding pads7 1 piece sliding pads8 2 piece flat guide bar9 2 piece flat guide bar
10 1 piece gas spring
Horizontal Cam Slide UnitBAK-Standard
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
12
2 .
1673
7.
2001
. 1
�
2016.12.00.065.080.2
Reference surface
95.3
4(p
ress
str
oke)
stroke 80
subject to alterations
13
2 .
1673
8.
2001
. 1
�
slider stroke: 80 mmmax. driver force: 224,3 kNspring restoring force: 2,7 kN
part Piece amount Designation1 1 piece slider2 1 piece driver3 1 piece slider bed4 2 piece retaining gib5 1 piece stop plate6 1 piece sliding pads7 1 piece sliding pads8 2 piece flat guide bar9 2 piece flat guide bar
10 1 piece gas spring
Horizontal Cam Slide UnitBAK-Standard
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
14
2 .
1673
9.
2001
. 1
�
2016.12.00.065.100.2
Referencesurface
119.
75(p
ress
str
oke)
stroke 100
subject to alterations
15
2 .
1674
0.
2001
. 1
�
slider stroke: 100 mmmax. driver force: 263,3 kNspring restoring force: 2,7 kN
part Piece amount Designation1 1 piece slider2 1 piece driver3 1 piece slider bed4 2 piece retaining gib5 1 piece stop plate6 1 piece sliding pads7 1 piece sliding pads8 2 piece flat guide bar9 2 piece flat guide bar
10 1 piece gas spring
Horizontal Cam Slide UnitBAK-Standard
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
16
2 .
1674
1.
2001
. 1
�
2016.12.00.100.040.2
Reference surface
47.6
7(p
ress
str
oke)
stroke 40
subject to alterations
17
2 .
1674
2.
2001
. 1
�
slider stroke: 40 mmmax. driver force: 270 kNspring restoring force: 2,5 kN
part Piece amount Designation1 1 piece slider2 1 piece driver3 1 piece slider bed4 2 piece retaining gib5 1 piece stop plate6 1 piece sliding pads7 1 piece sliding pads8 2 piece flat guide bar9 2 piece flat guide bar
10 1 piece gas spring
Horizontal Cam Slide UnitBAK-Standard
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
18
2 .
1674
3.
2001
. 1
�
2016.12.00.100.060.2
Reference surface
72.5
1(p
ress
str
oke)
stroke 60
subject to alterations
19
2 .
1674
4.
2001
. 1
�
slider stroke: 60 mmmax. driver force: 270 kNspring restoring force: 2,7 kN
part Piece amount Designation1 1 piece slider2 1 piece driver3 1 piece slider bed4 2 piece retaining gib5 1 piece stop plate6 1 piece sliding pads7 1 piece sliding pads8 2 piece flat guide bar9 2 piece flat guide bar
10 1 piece gas spring
Horizontal Cam Slide UnitlBAK-Standard
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
20
2 .
1674
5.
2001
. 1
�
2016.12.00.100.080.2
Referencesurface
95.3
4(p
ress
str
oke)
stroke 80
subject to alterations
21
2 .
1674
6.
2001
. 1
�
slider stroke: 80 mmmax. driver force: 345 kNspring restoring force: 2,7 kN
part Piece amount Designation1 1 piece slider2 1 piece driver3 1 piece slider bed4 2 piece retaining gib5 1 piece stop plate6 1 piece sliding pads7 1 piece sliding pads8 2 piece flat guide bar9 2 piece flat guide bar
10 1 piece gas spring
Horizontal Cam Slide UnitBAK-Standard
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
22
2 .
1674
7.
2001
. 1
�
2016.12.00.100.100.2
Referencesurface
119.
75(p
ress
str
oke)
stroke 100
subject to alterations
23
2 .
1674
8.
2001
. 1
�
slider stroke: 100 mmmax. driver force: 405 kNspring restoring force: 2,7 kN
part Piece amount Designation1 1 piece slider2 1 piece driver3 1 piece slider bed4 2 piece retaining gib5 1 piece stop plate6 1 piece sliding pads7 1 piece sliding pads8 2 piece flat guide bar9 2 piece flat guide bar
10 1 piece gas spring
Horizontal Cam Slide UnitBAK-Standard
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
24
2 .
1674
9.
2001
. 1
�
2016.12.00.150.040.2
Reference surface
stroke 40
47.6
7(p
ress
str
oke)
subject to alterations
25
2 .
1675
0.
2001
. 1
�
slider stroke: 40 mmmax. driver force: 405 kNspring restoring force: 2,5 kN
part Piece amount Designation1 1 piece slider2 1 piece driver3 1 piece slider bed4 2 piece retaining gib5 1 piece stop plate6 1 piece sliding pads7 1 piece sliding pads8 2 piece flat guide bar9 2 piece flat guide bar
10 1 piece gas spring
Horizontal Cam Slide UnitBAK-Standard
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
26
2 .
1675
1.
2001
. 1
�
2016.12.00.150.060.2
Reference surface
stroke 60
72.5
1(p
ress
str
oke)
subject to alterations
27
2 .
1675
2.
2001
. 1
�
slider stroke: 60 mmmax. driver force: 405 kNspring restoring force: 2,7 kN
part Piece amount Designation1 1 piece slider2 1 piece driver3 1 piece slider bed4 2 piece retaining gib5 1 piece stop plate6 1 piece sliding pads7 1 piece sliding pads8 2 piece flat guide bar9 2 piece flat guide bar
10 1 piece gas spring
Horizontal Cam Slide UnitBAK-Standard
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
28
2 .
1675
3.
2001
. 1
�
2016.12.00.150.080.2
Reference surface
stroke 80
95.3
4(p
ress
str
oke)
subject to alterations
29
2 .
1675
4.
2001
. 1
�
slider stroke: 80 mmmax. driver force: 517,5 kNspring restoring force: 2,7 kN
part Piece amount Designation1 1 piece slider2 1 piece driver3 1 piece slider bed4 2 piece retaining gib5 1 piece stop plate6 1 piece sliding pads7 1 piece sliding pads8 2 piece flat guide bar9 2 piece flat guide bar
10 1 piece gas spring
Horizontal Cam Slide UnitBAK-Standard
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
30
2 .
1675
5.
2001
. 1
�
2016.12.00.150.100.2
Reference surface
stroke 100
119.
75(p
ress
str
oke)
subject to alterations
31
2 .
1675
6.
2001
. 1
�
slider stroke: 100 mmmax. driver force: 607,5 kNspring restoring force: 2,7 kN
part Piece amount Designation1 1 piece slider2 1 piece driver3 1 piece slider bed4 2 piece retaining gib5 1 piece stop plate6 1 piece sliding pads7 1 piece sliding pads8 2 piece flat guide bar9 2 piece flat guide bar
10 1 piece gas spring
Horizontal Cam Slide UnitBAK-Standard
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
33
2 .
1675
8.
2001
. 1
�
Cam Slide Unit horizontal, Standard
horizontal, part assembled
subject to alterations
35
2 .
1676
0.
2000
. 1
�
Description
In order to meet the demands of cost efficiency, more and more press tools are beingequipped with off-the-shelf Cam Slides of highly specialized and often complexdesign.
Embedded lubricants provides a smooth, free-running action.However, the use of a reliable lubricant significantly improves sliding friction and performance.We recommend Klüberlub BE 41-1501.
The three major constructional members: slide, slide bed and driver are made fromhigh-quality cast iron spherolite.
The broad range of FIBRO Cam Slides offer the following types in a multitude of sizes:
– Horizontal Cam Slide Units– Flying Cam Slide Units– Sloping Cam Slide Units
To ensure ultimate safety a positive return action is fitted.
2016. Cam Slide Unit
Note:
Please visit fibro.partserver.de for CAD data regarding horizontal cam slide units and cam slide units suspended from above.Application-independent CAD formats are available on CD-ROM upon request.
subject to alterations
36
2 .
1676
1.
2000
. 1
�
Horizontal Cam Slide Unit 2016.10.2016.11.2016.14.
Selection Criteria:
Working Stroke
Working Angle
Force Capacity
Tool Face Size
Execution of Cam Slide
type:10. guide bars with
Non-Liquid Lubricant Driver Cast Irion with Non-Liquid LubricantSlider Steel
11. Cast Irion guidance ( GGG 45 ) with Non-Liquid Lubricant in DriverSlider and Upper Plate
14. Cast Irion guidance ( GGG 45 ) with sliding pads Bronze withNon-Liquid-LubricantSlider with steel plate hardened
subject to alterations
37
2 .
1676
2.
2000
. 1
�
2016. Horizontal Cam Slide Unit
P = F � tanß L = Stanß
Q = F �1
cosß
V = F � tan ß
Calculations example: 2016.10.00.050.060.1
P = F � tanß = 1510 N � tan 35° = 1057 N
Q = F �1 = 1510 N �
1 = 1843 Ncosß cos 35°
L = S = 60 = 85,7 mmtanß tan 35°
ß: driver cam angleF: required working force ( = piercing force + stripper spring force + slide return spring force )P: exerted press force [N]V: reaction force at slide bottom [N]Q: loading on driver cam face [N]S: working stroke of slide [mm]L: press stroke [mm]
Cam Slide Functions
subject to alterations
38
2 .
1676
3.
2000
. 1
�
Specification Overview - Tool Face Size- Force Capacity- Working Stroke
Horizontal Cam Slide Unit, Standard 2016.10.Horizontal Cam Slide Unit, Standard 2016.11.
New! Horizontal Cam Slide Unit, part assembled 2016.14.
� tool face size (width x height) (mm)
400 x 150480 �
300 x 130 300 x 130312 � �
250 x 130 250 x 130260 � �
200 x 110 200 x 110176 � �
150 x 100 150 x 100120 � �
100 x 100 100 x 100 100 x 100 80 � � �
65 x 70 65 x 7036 � �
52 x 65 52 x 65 52 x 6527 � � �
50 x 55 50 x 7015 � �
25 30 40 60 80
max
imum
slid
e w
orki
ng fo
rce
[kN
]
slide working stroke [mm]
subject to alterations
slide working stroke [mm]
25 (30) 40 60 80
15 2016.10.00.050.030.1 2016.10.00.050.060.1
27 2016.11.00.052.025.1 2016.11.00.052.040.1 2016.11.00.052.060.1
2016.14.00.052.025.1 2016.14.00.052.040.1 2016.14.00.052.060.1
36 2016.11.00.065.040.1 2016.11.00.065.060.1
2016.14.00.065.040.1 2016.14.00.065.060.1
80 2016.11.00.100.040.1 2016.11.00.100.060.1 2016.11.00.100.080.1
2016.14.00.100.040.1 2016.14.00.100.060.1 2016.14.00.100.080.1
120 2016.11.00.150.040.1 2016.11.00.150.060.1
2016.14.00.150.040.1 2016.14.00.150.060.1
176 2016.11.00.200.040.1 2016.11.00.200.060.1
2016.14.00.200.040.1 2016.14.00.200.060.1
260 2016.11.00.250.040.1 2016.11.00.250.060.1
2016.14.00.250.040.1 2016.14.00.250.060.1
312 2016.11.00.300.040.1 2016.11.00.300.060.1
2016.14.00.300.040.1 2016.14.00.300.060.1
480 2016.11.00.400.060.1
2016.14.00.400.060.1
39
2 .
1676
4.
2000
. 1
�
Specification Overview - Slide Force Capacity- Working Stroke- Order Number
max
imum
slid
e w
orki
ng fo
rce
[kN
]
Horizontal Cam Slide Unit, Standard 2016.10.Horizontal Cam Slide Unit, Standard 2016.11.
New! Horizontal Cam Slide Unit, part assembled 2016.14.
subject to alterations
40
2 .
1676
5.
2000
. 1
�
Order No max. max. rating installation dimensionslide nominal tool face return (working attitude) cata-stroke force width height springs width height length weight logue[mm] [kN] [mm] [mm] [N] [mm] [mm] [mm] [kg] page No
2016.11.00.052.025.1 25 27 52 65 600 98 140 138 8 41 2016.14.00.052.025.1
2016.11.00.052.040.1 40 610 153 42 2016.14.00.052.040.1
2016.11.00.052.060.1 60 620 198 14 432016.14.00.052.060.1
2016.11.00.065.040.1 40 36 65 70 770 130 160 170 20 442016.14.00.065.040.1
2016.11.00.065.060.1 60 215 21 452016.14.00.065.060.1
2016.11.00.100.040.1 40 80 100 100 1150 175 200 217 37 462016.14.00.100.040.1
2016.11.00.100.060.1 60 1170 237 38 472016.14.00.100.060.1
2016.11.00.100.080.1 80 1330 277 44 482016.14.00.100.080.1
2016.11.00.150.040.1 40 120 150 1880 260 220 226 63 492016.14.00.150.040.1
2016.11.00.150.060.1 60 1900 246 69 502016.14.00.150.060.1
2016.11.00.200.040.1 40 176 200 110 2820 310 240 236 82 512016.14.00.200.040.1
2016.11.00.200.060.1 60 2850 256 84 522016.14.00.200.060.1
2016.11.00.250.040.1 40 260 250 130 3690 360 270 246 107 532016.14.00.250.040.1
2016.11.00.250.060.1 60 3720 266 126 542016.14.00.250.060.1
2016.11.00.300.040.1 40 312 300 3690 410 246 129 552016.14.00.300.040.1
2016.11.00.300.060.1 60 3720 266 135 562016.14.00.300.060.1
2016.11.00.400.060.1 60 480 400 150 4760 525 250 356 203 572016.14.00.400.060.1
2016.10.00.050.030. 30 15 50 55 430 50 195 225 15 58
2016.10.00.050.060. 60 70 210 255 18 59
Data Overview
Horizontal Cam Slide Unit, Standard 2016.10.Horizontal Cam Slide Unit, Standard 2016.11.
New! Horizontal Cam Slide Unit, part assembled 2016.14.
subject to alterations
41
2 .
1676
6.
2000
. 1
�
Technical Data:tool face (width x height) 52 x 65slide stroke (max.) 25 mmslide force capacity (max.) 27 kNcompression spring force
preloaded 150 Ncompressed 600 N
weight 8 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Horizontal part assembled 14.driver - bronze embedded lubeslide - Steel plate, hardened
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Horizontal - 11.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 52 mm - 052.slide stroke 25 mm - 025.slide return by compession spring - 1Complete Order No -2016.11.00.052.025.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 16 compression spring high tensile steel 27 sliding pad bronze embedded lube 18 sliding pad steel, hardened 19 sliding pad bronze embedded lube 1
Note: Please state slide type and order number when ordering spare parts.
Horizontal Cam Slide Unit, Standard 2016.11.00.052.025
New! Horizontal Cam Slide Unit, part assembled 2016.14.00.052.025
subject to alterations
42
2 .
1676
7.
2000
. 1
�Technical Data:tool face (width x height) 52 x 65slide stroke (max.) 40 mmslide force capacity (max.) 27 kNcompression spring force
preloaded 100 Ncompressed 610 N
weight 8 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Horizontal part assembled 14.driver - bronze embedded lubeslide - Steel plate, hardened
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Horizontal - 11.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 52 mm - 052.slide stroke 40 mm - 040.slide return by compession spring - 1Complete Order No -2016.11.00.052.040.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 16 compression spring high tensile steel 27 sliding pad bronze embedded lube 18 sliding pad steel,hardened 19 sliding pad bronze embedded lube 1
Note: Please state slide type and order number when ordering spare parts.
Horizontal Cam Slide Unit, Standard 2016.11.00.052.040
New! Horizontal Cam Slide Unit, part assembled 2016.14.00.052.040
subject to alterations
43
2 .
1676
8.
2000
. 1
�
Technical Data:tool face (width x height) 52 x 65slide stroke (max.) 60 mmslide force capacity (max.) 27 kNcompression spring force
preloaded 110 Ncompressed 620 N
weight 14 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Horizontal part assembled 14.driver - bronze embedded lubeslide - Steel plate, hardened
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Horizontal - 11.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 52 mm - 052.slide stroke 60 mm - 060.slide return by compession spring - 1Complete Order No -2016.11.00.052.060.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 16 compression spring high tensile steel 27 sliding pad bronze embedded lube 18 sliding pad steel, hardened 19 sliding pad bronze embedded lube 1
Note: Please state slide type and order number when ordering spare parts.
Horizontal Cam Slide Unit, Standard 2016.11.00.052.060
New! Horizontal Cam Slide Unit, part assembled 2016.14.00.052.060
subject to alterations
44
2 .
1676
9.
2000
. 1
�Technical Data:tool face (width x height) 65 x 70slide stroke (max.) 40 mmslide force capacity (max.) 36 kNcompression spring force
preloaded 130 Ncompressed 770 N
weight 20 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Horizontal part assembled14.driver - bronze embedded lubeslide - Steel plate, hardened
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Horizontal - 11.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 65 mm - 065.slide stroke 40 mm - 040.slide return by compession spring - 1Complete Order No -2016.11.00.065.040.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 16 compression spring high tensile steel 27 sliding pad bronze embedded lube 18 sliding pad steel, hardened 19 sliding pad bronze embedded lube 1
Note: Please state slide type and order number when ordering spare parts.
Horizontal Cam Slide Unit, Standard 2016.11.00.065.040
New! Horizontal Cam Slide Unit, part assembled 2016.14.00.065.040
subject to alterations
45
2 .
1677
0.
2000
. 1
�
Technical Data:tool face (width x height) 65 x 70slide stroke (max.) 60 mmslide force capacity (max.) 36 kNcompression spring force
preloaded 130 Ncompressed 770 N
weight 21 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Horizontal part assembled 14.driver - bronze embedded lubeslide - Steel plate hardened
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Horizontal - 11.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 65 mm - 065.slide stroke 60 mm - 060.slide return by compession spring - 1Complete Order No -2016.11.00.065.060.1
Constructional Parts:
No Designation Material Qty.
1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 16 compression spring high tensile steel 27 sliding pad bronze embedded lube 18 sliding pad steel, hardened 19 sliding pad bronze embedded lube 1
Note: Please state slide type and order number when ordering spare parts.
Horizontal Cam Slide Unit, Standard 2016.11.00.065.060
New! Horizontal Cam Slide Unit, part assembled 2016.14.00.065.060
subject to alterations
46
2 .
1677
1.
2000
. 1
�Technical Data:tool face (width x height) 100 x 100slide stroke (max.) 40 mmslide force capacity (max.) 80 kNcompression spring force
preloaded 190 Ncompressed 1150 N
weight 37 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Horizontal part assembled 14.driver - bronze embedded lubeslide - Steel, hardened
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Horizontal - 11.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 100 mm - 100.slide stroke 40 mm - 040.slide return by compession spring - 1Complete Order No -2016.11.00.100.040.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 16 compression spring high tensile steel 27 sliding pad bronze embedded lube 18 sliding pad steel, hardened 19 sliding pad bronze embedded lube 1
Note: Please state slide type and order number when ordering spare parts.
Horizontal Cam Slide Unit, Standard 2016.11.00.100.040
New! Horizontal Cam Slide Unit, part assembled 2016.14.00.100.040
subject to alterations
47
2 .
1677
2.
2000
. 1
�
Technical Data:tool face (width x height) 100 x 100slide stroke (max.) 60 mmslide force capacity (max.) 80 kNcompression spring force
preloaded 210 Ncompressed 1170 N
weight 38 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Horizontal part assembled 14.driver - bronze embedded lubeslide - Steel plate, hardened
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Horizontal - 11.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 100 mm - 100.slide stroke 60 mm - 060.slide return by compession spring - 1Complete Order No -2016.11.00.100.060.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 16 compression spring high tensile steel 27 sliding pad bronze embedded lube 18 sliding pad steel, hardened 19 sliding pad bronze embedded lube 1
Note: Please state slide type and order number when ordering spare parts.
Horizontal Cam Slide Unit, Standard 2016.11.00.100.060
New! Horizontal Cam Slide Unit, part assembled 2016.14.00.100.060
subject to alterations
48
2 .
1677
3.
2000
. 1
�Technical Data:tool face (width x height) 100 x 100slide stroke (max.) 80 mmslide force capacity (max.) 80 kNcompression spring force
preloaded 190 Ncompressed 1330 N
weight 44 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Horizontal part assembled 14.driver - bronze embedded lubeslide - Steel plate, hardened
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Horizontal - 11.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 100 mm - 100.slide stroke 80 mm - 080.slide return by compession spring - 1Complete Order No -2016.11.00.100.080.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 16 compression spring high tensile steel 27 sliding pad bronze embedded lube 18 sliding pad steel, hardened 19 sliding pad bronze embedded lube 1
Note: Please state slide type and order number when ordering spare parts.
Horizontal Cam Slide Unit, Standard 2016.11.00.100.080
New! Horizontal Cam Slide Unit, part assembled 2016.14.00.100.080
subject to alterations
49
2 .
1677
4.
2000
. 1
�
Technical Data:tool face (width x height) 150 x 100slide stroke (max.) 40 mmslide force capacity (max.) 120 kNcompression spring force
preloaded 320 Ncompressed 1880 N
weight 63 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Horizontal part assembled 14.driver - bronze embedded lubeslide - Steel, hardened
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Horizontal - 11.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 150 mm - 150.slide stroke 40 mm - 040.slide return by compession spring - 1Complete Order No -2016.11.00.150.040.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 16 compression spring high tensile steel 27 sliding pad bronze embedded lube 18 sliding pad steel, hardened 19 sliding pad bronze embedded lube 1
Note: Please state slide type and order number when ordering spare parts.
Horizontal Cam Slide Unit, Standard 2016.11.00.150.040
New! Horizontal Cam Slide Unit, part assembled 2016.14.00.150.040
subject to alterations
50
2 .
1677
5.
2000
. 1
�Technical Data:tool face (width x height) 150 x 100slide stroke (max.) 60 mmslide force capacity (max.) 120 kNcompression spring force
preloaded 340 Ncompressed 1900 N
weight 69 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Horizontal part assembled 14.driver - bronze embedded lubeslide - Steel, hardened
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Horizontal - 11.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 150 mm - 150.slide stroke 60 mm - 060.slide return by compession spring - 1Complete Order No -2016.11.00.150.060.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 16 compression spring high tensile steel 27 sliding pad bronze embedded lube 28 sliding pad steel,hardened 29 sliding pad bronze embedded lube 2
Note: Please state slide type and order number when ordering spare parts.
Horizontal Cam Slide Unit, Standard 2016.11.00.150.060
New! Horizontal Cam Slide Unit, part assembled 2016.14.00.150.060
subject to alterations
51
2 .
1677
6.
2000
. 1
�
Technical Data:tool face (width x height) 200 x 110slide stroke (max.) 40 mmslide force capacity (max.) 176 kNcompression spring force
preloaded 470 Ncompressed 2820 N
weight 82 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Horizontal part assembled 14.driver - bronze embedded lubeslide - Steel, hardened
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Horizontal - 11.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 200 mm - 200.slide stroke 40 mm - 040.slide return by compession spring - 1Complete Order No -2016.11.00.200.040.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 37 sliding pad bronze embedded lube 28 sliding pad steel, hardened 29 sliding pad bronze embedded lube 2
Note: Please state slide type and order number when ordering spare parts.
Horizontal Cam Slide Unit, Standard 2016.11.00.200.040
New! Horizontal Cam Slide Unit, part assembled 2016.14.00.200.040
subject to alterations
52
2 .
1677
7.
2000
. 1
�Technical Data:tool face (width x height) 200 x 110slide stroke (max.) 60 mmslide force capacity (max.) 176 kNcompression spring force
preloaded 510 Ncompressed 2850 N
weight 84 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Horizontal part assembled 14.driver - bronze embedded lubeslide - Steel, hardened
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Horizontal - 11.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 200 mm - 200.slide stroke 60 mm - 060.slide return by compession spring - 1Complete Order No -2016.11.00.200.060.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 37 sliding pad bronze embedded lube 28 sliding pad steel, hardened 29 sliding pad bronze embedded lube 2
Note: Please state slide type and order number when ordering spare parts.
Horizontal Cam Slide Unit, Standard 2016.11.00.200.060
New! Horizontal Cam Slide Unit, part assembled 2016.14.00.200.060
subject to alterations
53
2 .
1677
8.
2000
. 1
�
Technical Data:tool face (width x height) 250 x 130slide stroke (max.) 40 mmslide force capacity (max.) 260 kNcompression spring force
preloaded 620 Ncompressed 3690 N
weight 107 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Horizontal part assembled 14.driver - bronze embedded lubeslide - Steel, hardened
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Horizontal - 11.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 250 mm - 250.slide stroke 40 mm - 040.slide return by compession spring - 1Complete Order No -2016.11.00.250.040.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 37 sliding pad bronze embedded lube 28 sliding pad steel, hardened 29 sliding pad bronze embedded lube 2
Note: Please state slide type and order number when ordering spare parts.
Horizontal Cam Slide Unit, Standard 2016.11.00.250.040
New! Horizontal Cam Slide Unit, part assembled 2016.14.00.250.040
subject to alterations
54
2 .
1677
9.
2000
. 1
�
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Horizontal part assembled 14.driver - bronze embedded lubeslide - Steel, hardened
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Horizontal - 11.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 250 mm - 250.slide stroke 60 mm - 060.slide return by compession spring - 1Complete Order No -2016.11.00.250.060.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 37 sliding pad bronze embedded lube 28 sliding pad steel, hardened 29 sliding pad bronze embedded lube 2
Note: Please state slide type and order number when ordering spare parts.
Horizontal Cam Slide Unit, Standard 2016.11.00.250.060
New! Horizontal Cam Slide Unit, part assembled 2016.14.00.250.060
Technical Data:tool face (width x height) 250 x 130slide stroke (max.) 60 mmslide force capacity (max.) 260 kNcompression spring force
preloaded 660 Ncompressed 3720 N
weight 126 kg
subject to alterations
55
2 .
1678
0.
2000
. 1
�
Technical Data:tool face (width x height) 300 x 130slide stroke (max.) 40 mmslide force capacity (max.) 312 kNcompression spring force
preloaded 620 Ncompressed 3690 N
weight 129 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Horizontal part assembled 14.driver - bronze embedded lubeslide - Steel, hardened
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Horizontal - 11.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 300 mm - 300.slide stroke 40 mm - 040.slide return by compession spring - 1Complete Order No -2016.11.00.300.040.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 37 sliding pad bronze embedded lube 28 sliding pad steel, hardened 29 sliding pad bronze embedded lube 2
Note: Please state slide type and order number when ordering spare parts.
Horizontal Cam Slide Unit, Standard 2016.11.00.300.040
New! Horizontal Cam Slide Unit, part assembled 2016.14.00.300.040
subject to alterations
56
2 .
1678
1.
2000
. 1
�Technical Data:tool face (width x height) 300 x 130slide stroke (max.) 60 mmslide force capacity (max.) 312 kNcompression spring force
preloaded 660 Ncompressed 3720 N
weight 135 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Horizontal part assembled 14.driver - bronze embedded lubeslide - Steel, hardened
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Horizontal - 11.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 300 mm - 300.slide stroke 60 mm - 060.slide return by compession spring - 1Complete Order No -2016.11.00.300.060.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 37 sliding pad bronze embedded lube 28 sliding pad steel, hardened 29 sliding pad bronze embedded lube 2
Note: Please state slide type and order number when ordering spare parts.
Horizontal Cam Slide Unit, Standard 2016.11.00.300.060
New! Horizontal Cam Slide Unit, part assembled 2016.14.00.300.060
subject to alterations
57
2 .
1678
2.
2000
. 1
�
Technical Data:tool face (width x height) 400 x 150slide stroke (max.) 60 mmslide force capacity (max.) 480 kNcompression spring force
preloaded 155 Ncompressed 4760 N
weight 203 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Horizontal part assembled 14.driver - bronze embedded lubeslide - Steel, hardened
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Horizontal - 11.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 400 mm - 400.slide stroke 60 mm - 060.slide return by compession spring - 1Complete Order No -2016.11.00.400.060.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 27 retaining gib spherol. cast iron embedded lube 48 sliding pad bronze embedded lube 29 sliding pad steel, hardened 2
10 sliding pad bronze embedded lube 2
Note: Please state slide type and order number when ordering spare parts.
Horizontal Cam Slide Unit, Standard 2016.11.00.400.060
New! Horizontal Cam Slide Unit, part assembled 2016.14.00.400.060
subject to alterations
58
2 .
1678
3.
2000
. 1
�Technical Data:tool face (width x height) 50 x 55slide stroke (max.) 30 mmslide force capacity (max.) 15 kNcompression spring force
preloaded 70 Ncompressed 430 N
weight 15 kg
DescriptionSlide and guiding parts of the Standard Cam Slides aremade of high-quality cast iron. One of each pair of slidingsurfaces is fitted with exchangeable wear strips (bronzewith embedded lubricant), or consists of prismatic guidesfrom bronze, with solid lubricant embedded. The slidesare supplied with positive return; the user can decidewhether or not to employ this facility in the application.
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Horizontal - 10.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 50 mm - 050.slide stroke 30 mm - 030.slide return by compession spring - 1Complete Order No -2016.10.00.050.030.1
Constructional Parts:
No Designation Material Qty.1 slide high tensile steel 12 driver spherol. cast iron embedded lube 13 slide bed high tensile steel 14 flat guide bar bronze embedded lube 15 positiv return bronze 16 compression spring high tensile steel 1
Note: Please state slide type and order number when ordering spare parts.
Horizontal Cam Slide Unit, Standard 2016.10.00.050.030
subject to alterations
59
2 .
1678
4.
2000
. 1
�
Technical Data:tool face (width x height) 50 x 68slide stroke (max.) 60 mmslide force capacity (max.) 15 kNcompression spring force
preloaded 70 Ncompressed 430 N
weight 18 kg
DescriptionSlide and guiding parts of the Standard Cam Slides aremade of high-quality cast iron. One of each pair of slidingsurfaces is fitted with exchangeable wear strips (bronzewith embedded lubricant), or consists of prismatic guidesfrom bronze, with solid lubricant embedded. The slidesare supplied with positive return; the user can decidewhether or not to employ this facility in the application.
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Horizontal - 10.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 50 mm - 050.slide stroke 60 mm - 060.slide return by compession spring - 1Complete Order No -2016.10.00.050.060.1
Constructional Parts:
No Designation Material Qty.1 slide high tensile steel 12 driver spherol. cast iron embedded lube 13 slide bed high tensile steel 14 flat guide bar bronze embedded lube 15 positiv return Bronze 16 compression spring high tensile steel 1
Note: Please state slide type and order number when ordering spare parts.
Horizontal Cam Slide Unit, Standard 2016.10.00.050.060
subject to alterations
61
2 .
1678
6.
2001
. 1
�
Cam Slide Unit flying, Standard
flying, full assembledwith Gasspring
subject to alterations
62
2 .
1678
7.
2000
. 1
�
Description
In order to meet the demands of cost efficiency, more and more press tools arebeing equipped with off-the-shelf Cam Slides of highly specialized and often com-plex design.
Embedded lubricants provides a smooth, free-running action.However, the use of a reliable lubricant significantly improves sliding friction and performance.We recommend Klüberlub BE 41-1501.
The three major constructional members: slide, slide bed and driver are made fromhigh-quality cast iron spherolite.
The broad range of FIBRO Cam Slides offer the following types in a multitude of sizes:
– Horizontal Cam Slide Units– Flying Cam Slide Units– Sloping Cam Slide Units
To ensure ultimate safety a positive return action is fitted.
Cam Slide Unit 2016.
Note:
Please visit fibro.partserver.de for CAD data regarding horizontal cam slide units and cam slide units suspended from above.Application-independent CAD formats are available on CD-ROM upon request.
subject to alterations
63
2 .
1678
8.
2000
. 1
�
Flying Cam Slide Unit 2016.21.2016.22
Selection Criteria:
Working Stroke
Working Angle
Force Capacity
Tool Face Size
Execution of Cam Slide
Execution:
21. Cast Irion guidance ( GGG 45 ) with Non-Liquid Lubricant in Driver,Slider and Upper Plate
22. Wear plate Bronze with Non-Liquid LubricantPrismatic guide Bronze with Non-LiquidLubricantSliding Block, SteelGasspring
subject to alterations
64
2 .
1678
9.
2000
. 1
�
ßF: spring action angle
ßA: slide action angle
F: required working force ( = piercing force + stripper spring force + slide return spring force )
P: exerted press force [N]V: loading on driver cam face [N]Q: loading on slide bottom [N]SA: working stroke of slide [mm]
SF: compression spring stroke [mm]
L: press stroke [mm]
Cam Slide Functions
P = F �cos ßF L = SA �
sin (ßF + ßA)sin (ß F + ßA) cos ßA
Q = F �1 S F = SA �
cos ßA
sin (ßF + ßA) cos ßF
V = F �1
tan (ßF + ßA)
Flying Cam Slide Unit 2016.
subject to alterations
65
2 .
1679
0.
2000
. 1
�
Specification Overview - Tool Face Size- Force Capacity- Working Stroke
Flying Cam Slide Unit, Standard 2016.21.
New! Flying Cam Slide Unit, full assembled 2016.22.with Gasspring
� tool face size (width x height) (mm)
99 � 180 x 120120 x 120
69 � 120 x 120
63 � 180 x 120
60 � 100 x 140 � 200 x 140
58 � 65 x 110 � 100 x 140 � 200 x 140
54 � 65 x 90
52 � 180 x 120120 x 120
50 � 65 x 100
46 � 100 x 140 � 200 x 140
42 � 65 x 80
39 � 180 x 120 � 100 x 120 � 200 x 120120 x 120
33 � 65 x 80 � 100 x 120 � 200 x 120� 100 x 100 � 200 x 100
31 � 65 x 80
30 � 100 x 100 � 200 x 100
28 � 180 x 120 � 100 x 100 � 200 x 100120 x 120
26 � 65 x 80
41 - 57 40 80 - 112 160 - 224
slid
e w
orki
ng s
trok
e [m
m]
maximum slide working force [kN]
subject to alterations
66
2 .
1679
1.
2000
. 1
�
Specification Overview - Slide Force Capacity- Slide Action Angle- Order Number
maximum slide working force [kN]
40 41 - 57 80 - 112 160 - 224
2016.22.00.120.028.2
0 2016.21.00.065.026.1 2016.21.00.100.028.1 2016.21.00.200.028.1
2016.22.00.065.026.2 2016.22.00.100.028.2 2016.22.00.200.028.2
2016.22.00.180.028.2
10 2016.21.10.065.031.1 2016.21.10.100.033.1 2016.21.10.200.033.1
2016.22.10.065.031.2 2016.22.10.100.033.2 2016.22.00.200.033.2
2016.22.15.120.039.2
15
2016.22.15.180.039.2
20 2016.21.20.065.033.1 2016.21.20.100.030.1 2016.21.20.200.030.1
2016.22.20.065.033.2 2016.22.20.100.030.2 2016.22.20.200.030.2
2016.22.30.120.052.2
30 2016.21.30.065.033.1 2016.21.30.100.033.1 2016.21.30.200.033.1
2016.22.30.065.033.2 2016.22.30.100.033.2 2016.22.30.200.033.2
2016.22.30.180.052.2
40 2016.22.40.180.063.2 2016.21.40.065.042.1 2016.21.40.100.039.1 2016.21.40.200.039.1
2016.22.40.065.042.2 2016.22.40.100.039.2 2016.22.40.200.039.2
45 2016.22.45.120.069.2
50 2016.21.50.065.054.1 2016.21.50.100.046.1 2016.21.50.200.046.1
2016.22.50.065.054.2 2016.22.50.100.046.2 2016.22.50.200.046.2
2016.22.60.120.099.2
60 2016.21.60.065.050.1 2016.21.60.100.060.1 2016.21.60.200.060.1
2016.22.60.065.050.2 2016.22.60.100.060.2 2016.22.60.200.060.2
2016.22.60.180.099.2
70 2016.21.70.065.058.1 2016.21.70.100.058.1 2016.21.70.200.058.1
2016.22.70.065.058.2 2016.22.70.100.058.2 2016.22.70.200.058.2
slid
e ac
tion
angl
e [d
egre
e]
Flying Cam Slide Unit, Standard 2016.21.
New! Flying Cam Slide Unit, full assembled 2016.22.with Gasspring
subject to alterations
67
2 .
1679
2.
2000
. 1
�
Order No max. slide max. rating installation dimensionslide action nominal tool face return (working attitude) cata-stroke angle force width height springs width height length weight logue[mm] [degree] [kN] [mm] [mm] [N] [mm] [mm] [mm] [kg] page No
2016.21.00.065.026.1 26,9 0 41 65 80 1090 115 210 206 20 682016.22.00.065.026.2 682016.21.10.065.031.1 31,6 10 41 1150 217 21 692016.22.10.065.031.2 692016.21.20.065.033.1 33,7 20 41 218 20 702016.22.20.065.033.2 702016.21.30.065.033.1 33,5 30 41 214 19 712016.22.30.065.033.2 712016.21.40.065.042.1 42,9 40 41 209 17 722016.22.40.065.042.2 722016.21.50.065.054.1 54,4 50 47 90 210 20 732016.22.50.065.054.2 732016.21.60.065.050.1 50 60 42 100 920 18 742016.22.60.065.050.2 742016.21.70.065.058.1 58,5 70 57 110 800 20 752016.22.70.065.058.2 75
2016.21.00.100.028.1 28,3 0 80 100 100 2880 160 280 271 49 762016.22.00.100.028.2 76 2016.21.10.100.033.1 33,3 10 80 3150 45 772016.22.10.100.033.2 772016.21.20.100.030.1 30,9 20 80 3060 782016.22.20.100.030.2 782016.21.30.100.033.1 33,5 30 96 120 2880 43 792016.22.30.100.033.2 792016.21.40.100.039.1 39 40 96 40 802016.22.40.100.039.2 802016.21.50.100.046.1 46,7 50 112 140 272 41 812016.22.50.100.046.2 812016.21.60.100.060.1 60 60 112 42 822016.22.60.100.060.2 822016.21.70.100.058.1 58,5 70 112 2810 832016.22.70.100.058.2 83
2016.22.00.120.028.2 28,7 0 40 120 120 2490 210 340 290 83 842016.22.15.120.039.2 39,7 15 360 305 88 852016.22.30.120.052.2 52,3 30 355 325 82 862016.22.45.120.069.2 69,6 45 370 355 100 872016.22.60.120.099.2 99,6 60 385 345 104 88
2016.22.00.180.028.2 28,7 0 340 290 87 892016.22.15.180.039.2 39,7 15 180 360 305 91 902016.22.30.180.052.2 52,3 30 355 325 86 912016.22.40.180.063.2 63,1 40 365 350 103 922016.22.60.180.099.2 99,6 60 390 345 104 93
2016.21.00.200.028.1 28,3 0 160 200 100 5770 260 280 271 88 942016.22.00.200.028.2 942016.21.10.200.033.1 33,3 10 160 6300 74 952016.22.10.200.033.2 952016.21.20.200.030.1 30,9 20 160 6120 76 962016.22.20.200.030.2 962016.21.30.200.033.1 33,5 30 192 120 5760 78 972016.22.30.200.033.2 972016.21.40.200.039.1 39 40 192 70 982016.22.40.200.039.2 982016.21.50.200.046.1 46,7 50 224 140 272 72 992016.22.50.200.046.2 992016.21.60.200.060.1 60 60 224 75 1002016.22.60.200.060.2 1002016.21.70.200.058.1 58,5 70 224 5720 71 1012016.22.70.200.058.2 101
Data Overview
Flying Cam Slide Unit, Standard 2016.21.
New! Flying Cam Slide Unit, full assembled 2016.22.with Gasspring
subject to alterations
68
2 .
1679
3.
2000
. 1
�
Flying Cam Slide Unit, Standard 2016.21.00.065.026
New! Flying Cam Slide Unit, full assembled 2016.22.00.065.026with Gasspring
Technical Data:tool face (width x height) 65 x 80slide stroke (max.) 26,9 mmslide force capacity (max.) 41 kNcompression spring force
preloaded 170 N compressed 1090 N
weight 20 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 65 mm - 065.slide stroke 26 mm - 026.slide return by compession spring - 1Complete Order No -2016.21.00.065.026.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 Positiv return high tensile steel 26 compression spring high tensile steel 17 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 111 gasspring 1
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
69
2 .
1679
4.
2000
. 1
�
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Flying Cam Slide Unit, Standard 2016.21.10.065.031
New! Flying Cam Slide Unit, full assembled 2016.22.10.065.031with Gasspring
Technical Data:tool face (width x height) 65 x 80slide stroke (max.) 31 mmslide force capacity (max.) 41 kNcompression spring force
preloaded 240 Ncompressed 1150 N
weight 21 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 10 degree - 10.width tool face 65 mm - 065.slide stroke 31 mm - 031.slide return by compession spring - 1Complete Order No -2016.21.10.065.031.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 1
2 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 17 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 11 1 gasspring 1
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
70
2 .
1679
5.
2000
. 1
�
Flying Cam Slide Unit, Standard 2016.21.20.065.033
New! Flying Cam Slide Unit, full assembled 2016.22.20.065.033with Gasspring
Technical Data:tool face (width x height) 65 x 80slide stroke (max.) 33,7 mmslide force capacity (max.) 41 kNcompression spring force
preloaded 310 Ncompressed 1150 N
weight 19 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 20 degree - 20.width tool face 65 mm - 065.slide stroke 33 mm - 033.slide return by compession spring - 1Complete Order No -2016.21.20.065.033.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 17 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 11 1 gasspring 1
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
71
2 .
1679
6.
2000
. 1
�
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Flying Cam Slide Unit, Standard 2016.21.30.065.033
New! Flying Cam Slide Unit, full assembled 2016.22.30.065.033with Gasspring
Technical Data:tool face (width x height) 65 x 80slide stroke (max.) 33,5 mmslide force capacity (max.) 41 kNcompression spring force
preloaded 430 Ncompressed 1150 N
weight 19 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 30 degree - 30.width tool face 65 mm - 065.slide stroke 33 mm - 033.slide return by compession spring - 1Complete Order No -2016.21.30.065.033.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 17 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 11 1 gasspring 1
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
72
2 .
1679
7.
2000
. 1
�
Flying Cam Slide Unit, Standard 2016.21.40.065.042
New! Flying Cam Slide Unit, full assembled 2016.22.40.065.042with Gasspring
Technical Data:tool face (width x height) 65 x 80slide stroke (max.) 42,9 mmslide force capacity (max.) 41 kNcompression spring force
preloaded 360 Ncompressed 1150 N
weight 17 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 40 degree - 40.width tool face 65 mm - 065.slide stroke 42 mm - 042.slide return by compession spring - 1Complete Order No -2016.21.40.065.042.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 17 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 11 1 gasspring 1
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
73
2 .
1679
8.
2000
. 1
�Flying Cam Slide Unit, Standard 2016.21.50.065.054
New! Flying Cam Slide Unit, full assembled 2016.22.50.065.054with Gasspring
Technical Data:tool face (width x height) 65 x 90slide stroke (max.) 54,4 mmslide force capacity (max.) 47 kNcompression spring force
preloaded 310 Ncompressed 1150 N
weight 20 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 50 degree - 50.width tool face 65 mm - 065.slide stroke 54 mm - 054.slide return by compession spring - 1Complete Order No -2016.21.50.065.054.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 17 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 11 1 gasspring 1
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
74
2 .
1679
9.
2000
. 1
�
Flying Cam Slide Unit, Standard 2016.21.60.065.050
New! Flying Cam Slide Unit, full assembled 2016.22.60.065.050with Gasspring
Technical Data:tool face (width x height) 65 x 100slide stroke (max.) 50 mmslide force capacity (max.) 42 kNcompression spring force
preloaded 300 Ncompressed 1160 N
weight 18 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 60 degree - 60.width tool face 65 mm - 065.slide stroke 50 mm - 050.slide return by compession spring - 1Complete Order No -2016.21.60.065.050.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 17 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 11 1 gasspring 1
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
75
2 .
1680
0.
2000
. 1
�Flying Cam Slide Unit, Standard 2016.21.70.065.058
New! Flying Cam Slide Unit, full assembled 2016.22.70.065.058with Gasspring
Technical Data:tool face (width x height) 65 x 110slide stroke (max.) 58,5 mmslide force capacity (max.) 57 kNcompression spring force
preloaded 300 Ncompressed 910 N
weight 20 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 70 degree - 70.width tool face 65 mm - 065.slide stroke 58 mm - 058.slide return by compession spring - 1Complete Order No -2016.21.70.065.058.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 17 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 11 1 gasspring 1
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
76
2 .
1680
1.
2000
. 1
�
Flying Cam Slide Unit, Standard 2016.21.00.100.028
New! Flying Cam Slide Unit, full assembled 2016.22.00.100.028with Gasspring
Technical Data:tool face (width x height) 100 x 100slide stroke (max.) 28,3 mmslide force capacity (max.) 80 kNcompression spring force
preloaded 320 Ncompressed 2880 N
weight 49 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 100 mm - 100.slide stroke 28 mm - 028.slide return by compession spring - 1Complete Order No -2016.21.00.100.028.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 17 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 111 flat guide bar bronze embedded lube 11 2 gasspring 2
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
77
2 .
1680
2.
2000
. 1
�Flying Cam Slide Unit, Standard 2016.21.10.100.033
New! Flying Cam Slide Unit, full assembled 2016.22.10.100.033with Gasspring
Technical Data:tool face (width x height) 100 x 100slide stroke (max.) 33,3 mmslide force capacity (max.) 80 kNcompression spring force
preloaded 150 Ncompressed 3150 N
weight 45 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 10 degree - 10.width tool face 100 mm - 100.slide stroke 33 mm - 033.slide return by compession spring - 1Complete Order No -2016.21.10.100.033.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 17 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 111 flat guide bar bronze embedded lube 11 2 gasspring 2
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
78
2 .
1680
3.
2000
. 1
�
Flying Cam Slide Unit, Standard 2016.21.20.100.030
New! Flying Cam Slide Unit, full assembled 2016.22.20.100.030with Gasspring
Technical Data:tool face (width x height) 100 x 100slide stroke (max.) 30,9 mmslide force capacity (max.) 80 kNcompression spring force
preloaded 180 Ncompressed 3060 N
weight 45 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 20 degree - 20.width tool face 100 mm - 100.slide stroke 30 mm - 030.slide return by compession spring - 1Complete Order No -2016.21.20.100.030.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 17 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 111 flat guide bar bronze embedded lube 11 2 gasspring 2
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
79
2 .
1680
4.
2000
. 1
�Flying Cam Slide Unit, Standard 2016.21.30.100.033
New! Flying Cam Slide Unit, full assembled 2016.22.30.100.033with Gasspring
Technical Data:tool face (width x height) 100 x 120slide stroke (max.) 33,5 mmslide force capacity (max.) 96 kNcompression spring force
preloaded 180 Ncompressed 2880 N
weight 43 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 30 degree - 30.width tool face 100 mm - 100.slide stroke 33 mm - 033.slide return by compession spring - 1Complete Order No -2016.21.30.100.033.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 17 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 111 flat guide bar bronze embedded lube 11 2 gasspring 2
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
80
2 .
1680
5.
2000
. 1
�
Flying Cam Slide Unit, Standard 2016.21.40.100.039
New! Flying Cam Slide Unit, full assembled 2016.22.40.100.039with Gasspring
Technical Data:tool face (width x height) 100 x 120slide stroke (max.) 39 mmslide force capacity (max.) 96 kNcompression spring force
preloaded 180 Ncompressed 2880 N
weight 40 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 40 degree - 40.width tool face 100 mm - 100.slide stroke 39 mm - 039.slide return by compession spring - 1Complete Order No -2016.21.40.100.039.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 17 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 111 flat guide bar bronze embedded lube 11 2 gasspring 2
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
81
2 .
1680
6.
2000
. 1
�Flying Cam Slide Unit, Standard 2016.21.50.100.046
New! Flying Cam Slide Unit, full assembled 2016.22.50.100.046with Gasspring
Technical Data:tool face (width x height) 100 x 140slide stroke (max.) 46,7 mmslide force capacity (max.) 112 kNcompression spring force
preloaded 180 Ncompressed 2880 N
weight 41 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 50 degree - 50.width tool face 100 mm - 100.slide stroke 46 mm - 046.slide return by compession spring - 1Complete Order No -2016.21.50.100.046.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 17 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 111 flat guide bar bronze embedded lube 11 2 gasspring 2
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
82
2 .
1680
7.
2000
. 1
�
Flying Cam Slide Unit, Standard 2016.21.60.100.060
New! Flying Cam Slide Unit, full assembled 2016.22.60.100.060with Gasspring
Technical Data:tool face (width x height) 100 x 140slide stroke (max.) 60 mmslide force capacity (max.) 112 kNcompression spring force
preloaded 180 Ncompressed 2880 N
weight 42 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 60 degree - 60.width tool face 100 mm - 100.slide stroke 60 mm - 060.slide return by compession spring - 1Complete Order No -2016.21.60.100.060.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 17 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 111 flat guide bar bronze embedded lube 11 2 gasspring 2
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
83
2 .
1680
8.
2000
. 1
�Flying Cam Slide Unit, Standard 2016.21.70.100.058
New! Flying Cam Slide Unit, full assembled 2016.22.70.100.058with Gasspring
Technical Data:tool face (width x height) 100 x 140slide stroke (max.) 58,5 mmslide force capacity (max.) 112 kNcompression spring force
preloaded 560 Ncompressed 2810 N
weight 42 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 70 degree - 70.width tool face 100 mm - 100.slide stroke 58 mm - 058.slide return by compession spring - 1Complete Order No -2016.21.70.100.058.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 17 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 111 flat guide bar bronze embedded lube 11 2 gasspring 2
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
84
2 .
1680
9.
2000
. 1
�Technical Data:tool face (width x height) 120 x 120slide stroke (max.) 28,7 mmslide force capacity (max.) 40 kN
weight 83 kg
DescriptionSlide and guiding parts of the Standard Cam Slides aremade of high-quality cast iron. One of each pair of slidingsurfaces is fitted with exchangeable wear strips (bronzewith embedded lubricant), or consists of prismatic guidesfrom bronze, with solid lubricant embedded. The slidesare supplied with positive return; the user can decidewhether or not to employ this facility in the application.
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 22.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 120 mm - 120.slide stroke 28 mm - 028.slide return by compession spring - 2Complete Order No -2016.22.00.120.028.2
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron 12 slide bed spherol. cast iron 13 sliding block high tensile steel 14 prismatic guide bronze embedded lube 15 retaining gib high tensile steel 26 flat guide bar bronze embedded lube 27 flat guide bar bronze embedded lube 28 flat guide bar bronze embedded lube 29 gasspring 1
10 positiv return bronze embedded lube 111 base plate spherol. cast iron
Note: Please state slide type and order number when ordering spare parts.
Flying Cam Slide Unit, full assembled 2016.22.00.120.028with Gasspring
subject to alterations
85
2 .
1681
0.
2000
. 1
�
Flying Cam Slide Unit, full assembled 2016.22.15.120.039with Gasspring
Technical Data:tool face (width x height) 120 x 120slide stroke (max.) 39,7 mmslide force capacity (max.) 40 kN
weight 88 kg
DescriptionSlide and guiding parts of the Standard Cam Slides aremade of high-quality cast iron. One of each pair of slidingsurfaces is fitted with exchangeable wear strips (bronzewith embedded lubricant), or consists of prismatic guidesfrom bronze, with solid lubricant embedded. The slidesare supplied with positive return; the user can decidewhether or not to employ this facility in the application.
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 22.driver and slide: cast iron guides with embedded lubricantworking angle 15 degree - 15.width tool face 120 mm - 120.slide stroke 39 mm - 039.slide return by compession spring - 2Complete Order No -2016.22.15.120.039.2
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron 12 slide bed spherol. cast iron 13 sliding block high tensile steel 14 prismatic guide bronze embedded lube 15 retaining gib high tensile steel 26 flat guide bar bronze embedded lube 27 flat guide bar bronze embedded lube 28 flat guide bar bronze embedded lube 29 gasspring 1
10 positiv return bronze embedded lube 111 base plate spherol. cast iron
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
86
2 .
1681
1.
2000
. 1
�Technical Data:tool face (width x height) 120 x 120slide stroke (max.) 52,7 mmslide force capacity (max.) 40 kN
weight 82 kg
DescriptionSlide and guiding parts of the Standard Cam Slides aremade of high-quality cast iron. One of each pair of slidingsurfaces is fitted with exchangeable wear strips (bronzewith embedded lubricant), or consists of prismatic guidesfrom bronze, with solid lubricant embedded. The slidesare supplied with positive return; the user can decidewhether or not to employ this facility in the application.
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 22.driver and slide: cast iron guides with embedded lubricantworking angle 30 degree - 30.width tool face 120 mm - 120.slide stroke 52 mm - 052.slide return by compession spring - 2Complete Order No -2016.22.30.120.052.2
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron 12 slide bed spherol. cast iron 13 sliding block high tensile steel 14 prismatic guide bronze embedded lube 15 retaining gib high tensile steel 26 flat guide bar bronze embedded lube 27 flat guide bar bronze embedded lube 28 flat guide bar bronze embedded lube 29 gasspring 1
10 positiv return bronze embedded lube 111 base plate spherol. cast iron
Note: Please state slide type and order number when ordering spare parts.
Flying Cam Slide Unit, full assembled 2016.22.30.120.052with Gasspring
subject to alterations
87
2 .
1681
2.
2000
. 1
�
Flying Cam Slide Unit, full assembled 2016.22.45.120.069with Gasspring
Technical Data:tool face (width x height) 120 x 120slide stroke (max.) 69,6 mmslide force capacity (max.) 40 kN
weight 100 kg
DescriptionSlide and guiding parts of the Standard Cam Slides aremade of high-quality cast iron. One of each pair of slidingsurfaces is fitted with exchangeable wear strips (bronzewith embedded lubricant), or consists of prismatic guidesfrom bronze, with solid lubricant embedded. The slidesare supplied with positive return; the user can decidewhether or not to employ this facility in the application.
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 22.driver and slide: cast iron guides with embedded lubricantworking angle 45 degree - 45.width tool face 120 mm - 120.slide stroke 69 mm - 069.slide return by compession spring - 2Complete Order No -2016.22.45.120.069.2
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron 12 slide bed spherol. cast iron 13 sliding block high tensile steel 14 prismatic guide bronze embedded lube 15 retaining gib high tensile steel 26 flat guide bar bronze embedded lube 27 flat guide bar bronze embedded lube 28 flat guide bar bronze embedded lube 29 gasspring 1
10 positiv return bronze embedded lube 111 base plate spherol. cast iron
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
88
2 .
1681
3.
2000
. 1
�Technical Data:tool face (width x height) 120 x 120slide stroke (max.) 99,6 mmslide force capacity (max.) 40 kN
weight 104 kg
DescriptionSlide and guiding parts of the Standard Cam Slides aremade of high-quality cast iron. One of each pair of slidingsurfaces is fitted with exchangeable wear strips (bronzewith embedded lubricant), or consists of prismatic guidesfrom bronze, with solid lubricant embedded. The slidesare supplied with positive return; the user can decidewhether or not to employ this facility in the application.
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 22.driver and slide: cast iron guides with embedded lubricantworking angle 60 degree - 60.width tool face 120 mm - 120.slide stroke 99 mm - 099.slide return by compession spring - 2Complete Order No -2016.22.60.120.099.2
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron 12 slide bed spherol. cast iron 13 sliding block high tensile steel 14 prismatic guide bronze embedded lube 15 retaining gib high tensile steel 26 flat guide bar bronze embedded lube 27 flat guide bar bronze embedded lube 28 flat guide bar bronze embedded lube 29 gasspring 1
10 positiv return bronze embedded lube 111 base plate spherol. cast iron
Note: Please state slide type and order number when ordering spare parts.
Flying Cam Slide Unit, full assembled 2016.22.60.120.099with Gasspring
subject to alterations
89
2 .
1681
4.
2000
. 1
�
Flying Cam Slide Unit, full assembled 2016.22.00.180.028with Gasspring
Technical Data:tool face (width x height) 120 x 120slide stroke (max.) 28,7 mmslide force capacity (max.) 40 kN
weight 100 kg
DescriptionSlide and guiding parts of the Standard Cam Slides aremade of high-quality cast iron. One of each pair of slidingsurfaces is fitted with exchangeable wear strips (bronzewith embedded lubricant), or consists of prismatic guidesfrom bronze, with solid lubricant embedded. The slidesare supplied with positive return; the user can decidewhether or not to employ this facility in the application.
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 22.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 180 mm - 180.slide stroke 28 mm - 028.slide return by compession spring - 2Complete Order No -2016.22.00.180.028.2
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron 12 slide bed spherol. cast iron 13 sliding block high tensile steel 14 prismatic guide bronze embedded lube 15 retaining gib high tensile steel 26 flat guide bar bronze embedded lube 27 flat guide bar bronze embedded lube 28 flat guide bar bronze embedded lube 29 gasspring 1
10 positiv return bronze embedded lube 111 base plate spherol. cast iron
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
90
2 .
1681
5.
2000
. 1
�Technical Data:tool face (width x height) 180 x 120slide stroke (max.) 39,7 mmslide force capacity (max.) 40 kN
weight 91 kg
DescriptionSlide and guiding parts of the Standard Cam Slides aremade of high-quality cast iron. One of each pair of slidingsurfaces is fitted with exchangeable wear strips (bronzewith embedded lubricant), or consists of prismatic guidesfrom bronze, with solid lubricant embedded. The slidesare supplied with positive return; the user can decidewhether or not to employ this facility in the application.
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 22.driver and slide: cast iron guides with embedded lubricantworking angle 15 degree - 15.width tool face 180 mm - 180.slide stroke 39 mm - 039.slide return by compession spring - 2Complete Order No -2016.22.15.180.039.2
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron 12 slide bed spherol. cast iron 13 sliding block high tensile steel 14 prismatic guide bronze embedded lube 15 retaining gib high tensile steel 26 flat guide bar bronze embedded lube 27 flat guide bar bronze embedded lube 28 flat guide bar bronze embedded lube 29 gasspring 1
10 positiv return bronze embedded lube 111 base plate spherol. cast iron
Note: Please state slide type and order number when ordering spare parts.
Flying Cam Slide Unit, full assembled 2016.22.15.180.039with Gasspring
subject to alterations
91
2 .
1681
6.
2000
. 1
�
Flying Cam Slide Unit, full assembled 2016.22.30.180.052with Gasspring
Technical Data:tool face (width x height) 180 x 120slide stroke (max.) 52,7 mmslide force capacity (max.) 40 kN
weight 100 kg
DescriptionSlide and guiding parts of the Standard Cam Slides aremade of high-quality cast iron. One of each pair of slidingsurfaces is fitted with exchangeable wear strips (bronzewith embedded lubricant), or consists of prismatic guidesfrom bronze, with solid lubricant embedded. The slidesare supplied with positive return; the user can decidewhether or not to employ this facility in the application.
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 22.driver and slide: cast iron guides with embedded lubricantworking angle 30 degree - 30.width tool face 180 mm - 180.slide stroke 52 mm - 052.slide return by compession spring - 2Complete Order No -2016.22.30.180.052.2
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron 12 slide bed spherol. cast iron 13 sliding block high tensile steel 14 prismatic guide bronze embedded lube 15 retaining gib high tensile steel 26 flat guide bar bronze embedded lube 27 flat guide bar bronze embedded lube 28 flat guide bar bronze embedded lube 29 gasspring 1
10 positiv return bronze embedded lube 111 base plate spherol. cast iron
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
92
2 .
1681
7.
2000
. 1
�Technical Data:tool face (width x height) 180 x 120slide stroke (max.) 63,1 mmslide force capacity (max.) 40 kN
weight 103 kg
DescriptionSlide and guiding parts of the Standard Cam Slides aremade of high-quality cast iron. One of each pair of slidingsurfaces is fitted with exchangeable wear strips (bronzewith embedded lubricant), or consists of prismatic guidesfrom bronze, with solid lubricant embedded. The slidesare supplied with positive return; the user can decidewhether or not to employ this facility in the application.
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 22.driver and slide: cast iron guides with embedded lubricantworking angle 40 degree - 40.width tool face 180 mm - 180.slide stroke 63 mm - 063.slide return by compession spring - 2Complete Order No -2016.22.40.180.063.2
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron 12 slide bed spherol. cast iron 13 sliding block high tensile steel 14 prismatic guide bronze embedded lube 15 retaining gib high tensile steel 26 flat guide bar bronze embedded lube 27 flat guide bar bronze embedded lube 28 flat guide bar bronze embedded lube 29 gasspring 1
10 positiv return bronze embedded lube 111 base plate spherol. cast iron
Note: Please state slide type and order number when ordering spare parts.
Flying Cam Slide Unit, full assembled 2016.22.40.180.063with Gasspring
subject to alterations
93
2 .
1681
8.
2000
. 1
�
Flying Cam Slide Unit, full assembled 2016.22.60.180.099with Gasspring
Technical Data:tool face (width x height) 180 x 120slide stroke (max.) 99,6 mmslide force capacity (max.) 40 kN
weight 104 kg
DescriptionSlide and guiding parts of the Standard Cam Slides aremade of high-quality cast iron. One of each pair of slidingsurfaces is fitted with exchangeable wear strips (bronzewith embedded lubricant), or consists of prismatic guidesfrom bronze, with solid lubricant embedded. The slidesare supplied with positive return; the user can decidewhether or not to employ this facility in the application.
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 22.driver and slide: cast iron guides with embedded lubricantworking angle 60 degree - 60.width tool face 180 mm - 180.slide stroke 99 mm - 099.slide return by compession spring - 2Complete Order No -2016.22.60.180.099.2
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron 12 slide bed spherol. cast iron 13 sliding block high tensile steel 14 prismatic guide bronze embedded lube 15 retaining gib high tensile steel 26 flat guide bar bronze embedded lube 27 flat guide bar bronze embedded lube 28 flat guide bar bronze embedded lube 29 gasspring 1
10 positiv return bronze embedded lube 111 base plate spherol. cast iron
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
94
2 .
1681
9.
2000
. 1
�
Flying Cam Slide Unit, Standard 2016.21.00.200.028
New! Flying Cam Slide Unit, full assembled 2016.22.00.200.028with Gasspring
Technical Data:tool face (width x height) 200 x 100slide stroke (max.) 28,3 mmslide force capacity (max.) 160 kNcompression spring force
preloaded 640 Ncompressed 5770 N
weight 88 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 0 degree - 00.width tool face 200 mm - 200.slide stroke 28 mm - 028.slide return by compession spring - 1Complete Order No -2016.21.00.200.028.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 47 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 211 flat guide bar bronze embedded lube 212 retaining gib bronze embedded lube 213 gasspring 2
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
95
2 .
1682
0.
2000
. 1
�Flying Cam Slide Unit, Standard 2016.21.10.200.033
New! Flying Cam Slide Unit, full assembled 2016.22.10.200.033with Gasspring
Technical Data:tool face (width x height) 200 x 100slide stroke (max.) 33,3 mmslide force capacity (max.) 160 kNcompression spring force
preloaded 300 Ncompressed 6300 N
weight 74 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 10 degree - 10.width tool face 200 mm - 200.slide stroke 33 mm - 033.slide return by compession spring - 1Complete Order No -2016.21.10.200.033.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 47 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 211 flat guide bar bronze embedded lube 212 retaining gib bronze embedded lube 213 gasspring 2
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
96
2 .
1682
1.
2000
. 1
�
Flying Cam Slide Unit, Standard 2016.21.20.200.030
New! Flying Cam Slide Unit, full assembled 2016.22.20.200.030with Gasspring
Technical Data:tool face (width x height) 200 x 100slide stroke (max.) 30,9 mmslide force capacity (max.) 160 kNcompression spring force
preloaded 360 Ncompressed 6120 N
weight 76 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 20 degree - 20.width tool face 200 mm - 200.slide stroke 30 mm - 030.slide return by compession spring - 1Complete Order No -2016.21.20.200.030.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 47 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 211 flat guide bar bronze embedded lube 212 retaining gib bronze embedded lube 213 gasspring 2
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
97
2 .
1682
2.
2000
. 1
�Flying Cam Slide Unit, Standard 2016.21.30.200.033
New! Flying Cam Slide Unit, full assembled 2016.22.30.200.033with Gasspring
Technical Data:tool face (width x height) 200 x 120slide stroke (max.) 33,5 mmslide force capacity (max.) 192 kNcompression spring force
preloaded 360 Ncompressed 5760 N
weight 78 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 30 degree - 30.width tool face 200 mm - 200.slide stroke 33 mm - 033.slide return by compession spring - 1Complete Order No -2016.21.30.200.033.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 47 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 211 flat guide bar bronze embedded lube 212 retaining gib bronze embedded lube 213 gasspring 2
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
98
2 .
1682
3.
2000
. 1
�
Flying Cam Slide Unit, Standard 2016.21.40.200.039
New! Flying Cam Slide Unit, full assembled 2016.22.40.200.039with Gasspring
Technical Data:tool face (width x height) 200 x 120slide stroke (max.) 39 mmslide force capacity (max.) 192 kNcompression spring force
preloaded 360 Ncompressed 5760 N
weight 70 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 40 degree - 40.width tool face 200 mm - 200.slide stroke 39 mm - 039.slide return by compession spring - 1Complete Order No -2016.21.40.200.039.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 47 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 211 flat guide bar bronze embedded lube 212 retaining gib bronze embedded lube 213 gasspring 2
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
99
2 .
1682
4.
2000
. 1
�Flying Cam Slide Unit, Standard 2016.21.50.200.046
New! Flying Cam Slide Unit, full assembled 2016.22.50.200.046with Gasspring
Technical Data:tool face (width x height) 200 x 140slide stroke (max.) 46 mmslide force capacity (max.) 224 kNcompression spring force
preloaded 360 Ncompressed 5760 N
weight 72 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - New type: Flyingvollbestückt mit Gasdruckfeder 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 50 degree - 50.width tool face 200 mm - 200.slide stroke 46 mm - 046.slide return by compession spring - 1Complete Order No -2016.21.50.200.046.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 47 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 211 flat guide bar bronze embedded lube 212 retaining gib bronze embedded lube 213 gasspring 2
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
100
2 .
1682
5.
2000
. 1
�
Flying Cam Slide Unit, Standard 2016.21.60.200.060
New! Flying Cam Slide Unit, full assembled 2016.22.60.200.060with Gasspring
Technical Data:tool face (width x height) 200 x 140slide stroke (max.) 60 mmslide force capacity (max.) 224 kNcompression spring force
preloaded 360 Ncompressed 5760 N
weight 75 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 60 degree - 60.width tool face 200 mm - 200.slide stroke 60 mm - 060.slide return by compession spring - 1Complete Order No -2016.21.60.200.060.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 47 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 211 flat guide bar bronze embedded lube 212 retaining gib bronze embedded lube 213 gasspring 2
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
101
2 .
1682
6.
2000
. 1
�Flying Cam Slide Unit, Standard 2016.21.70.200.058
New! Flying Cam Slide Unit, full assembled 2016.22.70.200.058with Gasspring
Technical Data:tool face (width x height) 200 x 140slide stroke (max.) 58,5 mmslide force capacity (max.) 224 kNcompression spring force
preloaded 1120 Ncompressed 5620 N
weight 71 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - New type: Flyingfull assembled with gasspring 22.driver - sliding block, Steel, induction hardenedslide - Prisma, bronzeembedded lubeflat guide bar - bronzeembedded lube
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Flying - 21.driver and slide: cast iron guides with embedded lubricantworking angle 70 degree - 70.width tool face 200 mm - 200.slide stroke 58 mm - 058.slide return by compession spring - 1Complete Order No -2016.21.70.200.058.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 47 prismatic guide bronze embedded lube 18 sliding block steel 19 flat guide bar bronze embedded lube 2
10 flat guide bar bronze embedded lube 211 flat guide bar bronze embedded lube 212 retaining gib bronze embedded lube 213 gasspring 2
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
103
2 .
1682
8.
2001
. 1
�
Cam Slide Unit Slope, Standard
Slope, part assembled
subject to alterations
104
2 .
1682
9.
2000
. 1
�
Description
In order to meet the demands of cost efficiency, more and more press tools are beingequipped with off-the-shelf Cam Slides of highly specialized and often complexdesign.
Embedded lubricants provides a smooth, free-running action.However, the use of a reliable lubricant significantly improves sliding friction and performance.We recommend Klüberlub BE 41-1501.
The three major constructional members: slide, slide bed and driver are made fromhigh-quality cast iron spherolite.
The broad range of FIBRO Cam Slides offer the following types in a multitude of sizes:
– Horizontal Cam Slide Units– Flying Cam Slide Units– Sloping Cam Slide Units
To ensure ultimate safety a positive return action is fitted.
Cam Slide Unit 2016.
Note:
Please visit fibro.partserver.de for CAD data regarding horizontal cam slide units and cam slide units suspended from above.Application-independent CAD formats are available on CD-ROM upon request.
subject to alterations
105
2 .
1683
0.
2000
. 1
�
Selection Criteria:
Working Stroke
Working Angle
Force Capacity
Tool Face Size
Execution of Cam Slide
Slope Cam Slide Unit 2016.30.2016.31.2016.34.
Execution:
30. guide bars withNon-Liquid Lubricant Driver cast Irion with Non-Liquid LubricantSlider Steel
31. Cast Irion guidance ( GGG 45 ) with Non-Liquid Lubricant in Driver, Slider and Upper Plate
34. Cast Irion guidance Driver ( GGG 45 ) with sliding pads Bronze withNon-Liquid LubricantSlider with steel plate hardened
subject to alterations
P = F �
sin ßT L = S A �
cos (ßT - ßA)cos (ßT - ßA) sin ßT
Q = F �
1 V = F � tan (ßT - ßA)sin (ßT - ßA)
106
2 .
1683
1.
2000
. 1
�
ßT: driver cam angle
ßA: slide action angle
F: required working force ( = piercing force + stripper spring force + slide return spring force )
P: exerted press force [N]V: loading on driver cam face [N]Q: loading on slide bottom [N]SA: working stroke of slide [mm]
L: press stroke (mm)
Cam Slide Functions
Slope Cam Slide Unit 2016
subject to alterations
107
2 .
1683
2.
2000
. 1
�
Specification Overview - Tool Face Size- Force Capacity- Working Stroke
Slope Cam Slide Unit, Standard 2016.30.Slope Cam Slide Unit, Standard 2016.31.
New! Slope Cam Slide Unit, part assembled 2016.34.
� tool face size (width x height) (mm)
120 � 150 x 100 � 150 x 100
72 � 100 x 90 � 100 x 90
36 � 65 x 70 � 65 x 70
15 � 55 x 55 � 50 x 70
30 45 60 70
slide working stroke [mm]
max
imum
slid
e w
orki
ng fo
rce
[kN
]
subject to alterations
maximum slide working force [kN]
15 36 72 120
5 2016.30.05.050.060.1
2016.31.10.065.045.1 2016.31.10.100.045.1 2016.31.10.150.045.1
2016.34.10.065.045.1 2016.34.10.100.045.1 2016.34.10.150.045.110
2016.31.10.065.070.1 2016.31.05.100.070.1 2016.31.10.150.070.1
2016.34.10.065.070.1 2016.34.05.100.070.1 2016.34.10.150.070.1
15 2016.30.15.050.030.12016.30.15.050.060.1
2016.31.20.065.045.1 2016.31.20.100.045.1 2016.31.20.150.045.1
2016.34.20.065.045.1 2016.34.20.100.045.1 2016.34.20.150.045.120
2016.31.20.065.070.1 2016.31.20.100.070.1 2016.31.20.150.070.1
2016.34.20.065.070.1 2016.34.20.100.070.1 2016.34.20.150.070.1
108
2 .
1683
3.
2000
. 1
�
Specification Overview - Slide Force Capacity- Slide Action Angle- Order Number
Slope Cam Slide Unit, Standard 2016.30.Slope Cam Slide Unit, Standard 2016.31.
New! Slope Cam Slide Unit, part assembled 2016.34.
slid
e w
ork
ing
an
gle
[d
egre
e]
subject to alterations
Order No max. slide max. rating installation dimensionslide action nominal tool face return (working attitude) cata-stroke angle force width height springs width height length weight logue[mm] [degree] [kN] [mm] [mm] [N] [mm] [mm] [mm] [kg] page No
2016.30.15.050.030.1 30 15 15 50 55 430 50 210 265 17,5 1102016.30.05.050.060.1 60 5 15 70 220 290 20 1112016.30.15.050.060.1 15 15 225 295 22 111
2016.31.10.065.045.1 45 10 36 65 760 130 160 180 20 1122016.34.10.065.045.1 112
2016.31.20.065.045.1 20 36 170 185,2 21 1132016.34.20.065.045.1 113
2016.31.10.065.070.1 70 10 36 930 224,4 1142016.34.10.065.070.1 114
2016.31.20.065.070.1 20 36 227,5 22 1152016.34.20.065.070.1 115
2016.31.10.100.045.1 45 10 72 100 90 1130 175 200 205,1 33 1162016.34.10.100.045.1 116
2016.31.20.100.045.1 20 72 212,8 32 1172016.34.20.100.045.1 117
2016.31.10.100.070.1 70 10 72 1170 239,6 38 1182016.34.10.100.070.1 118
2016.31.20.100.070.1 20 72 245,7 39 1192016.34.20.100.070.1 119
2016.31.10.150.045.1 45 10 120 150 100 1850 260 220 235,6 63 1202016.34.10.150.045.1 120
2016.31.20.150.045.1 20 120 244 66 1212016.34.20.150.045.1 121
2016.31.10.150.070.1 70 10 120 1880 260,2 73 1222016.34.10.150.070.1 122
2016.31.20.150.070.1 20 120 230 267,5 75 1232016.34.20.150.070.1 123
109
2 .
1683
4.
2000
. 1
�Slope Cam Slide Unit, Standard 2016.30.Slope Cam Slide Unit, Standard 2016.31.
New! Slope Cam Slide Unit, part assembled 2016.34.
Data Overview
subject to alterations
110
2 .
1683
5.
2000
. 1
�
Slope Cam Slide Unit 2016.30.15.050.030.
Technical Data:tool face (width x height) 50 x 55 mmslide stroke (max.) 30 mmslide force capacity (max.) 15 kNcompression spring force
preloaded 70 Ncompressed 430 N
weight 17,5 kg
DescriptionSlide and guiding parts of the Standard Cam Slides aremade of high-quality cast iron. One of each pair of slidingsurfaces is fitted with exchangeable wear strips (bronzewith embedded lubricant), or consists of prismatic guidesfrom bronze, with solid lubricant embedded. The slidesare supplied with positive return; the user can decidewhether or not to employ this facility in the application.
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Slope - 30.driver and slide: cast iron guides with embedded lubricantworking angle 15 degree - 15.width tool face 50 mm - 050.slide stroke 30 mm - 030.slide return by compession spring - 1 Complete Order No -2016.30.15.050.030.1
Constructional Parts:
No Designation Material Qty.1 slide high tensile steel 12 driver spherol. cast iron embedded lube 13 slide bed high tensile steel 14 flat guide bar bronze embedded lube 1 5 positiv return Bronze 1 6 compression spring high tensile steel 1
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
111
2 .
1683
6.
2000
. 1
�
Slope Cam Slide Unit 2016.30.(05)15.050.060.
Constructional Parts:
No Designation Material Qty.1 slide high tensile steel 12 driver spherol. cast iron embedded lube 13 slide bed high tensile steel 14 flat guide bar (5°) bronze embedded lube 1
flat guide bar 15° bronze embedded lube 15 positiv return Bronze 16 positive return high tensile steel 2
Note: Please state slide type and order number when ordering spare parts.
Technical Data:tool face (width x height) 50 x 70 mmslide stroke (max.) 60 mmslide force capacity (max.) 15 kNcompression spring force
preloaded 70 Ncompressed 430 N
weight 22 kg
DescriptionSlide and guiding parts of the Standard Cam Slides aremade of high-quality cast iron. One of each pair of sli-ding surfaces is fitted with exchangeable wear strips(bronze with embedded lubricant), or consists of prisma-tic guides from bronze, with solid lubricant embedded.The slides are supplied with positive return; the user candecide whether or not to employ this facility in the appli-cation.
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Slope - 30.driver and slide: cast iron guides with embedded lubricantworking angle (5) 15 degree - (05)15.width tool face 50 mm - 050.slide stroke 60 mm - 060.slide return by compession spring - 1Complete Order No -2016.30.(05)15.050.060.1
subject to alterations
112
2 .
1683
7.
2000
. 1
�
Slope Cam Slide Unit, Standard 2016.31.10.065.045
New! Slope Cam Slide Unit, part assembled 2016.34.10.065.045
Technical Data:tool face (width x height) 65 x 70slide stroke (max.) 45 mmslide force capacity (max.) 36 kNcompression spring force
preloaded 180 Ncompressed 760 N
weight 20 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Slope, part assembled 34.driver and slide: cast iron guides with embedded lubricantdriver - bronze embedded lubeslide - casehardening steel
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Slope - 31.driver and slide: cast iron guides with embedded lubricantworking angle 10 degree - 10.width tool face 65 mm - 065.slide stroke 45 mm - 045.slide return by compession spring - 1Complete Order No -2016.31.10.065.045.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 16 compression spring high tensile steel 27 sliding pad bronze embedded lube 18 sliding pad steel, hardened 19 sliding pad bronze embedded lube 1
Note: Please state slide type and order number when ordering spare parts.
100
subject to alterations
113
2 .
1683
8.
2000
. 1
�Slope Cam Slide Unit, Standard 2016.31.20.065.045
New! Slope Cam Slide Unit, part assembled 2016.34.20.065.045
Technical Data:tool face (width x height) 65 x 70slide stroke (max.) 45 mmslide force capacity (max.) 36 kNcompression spring force
preloaded 180 Ncompressed 760 N
weight 21 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Slope, part assembled 34.driver and slide: cast iron guides with embedded lubricantdriver - bronze embedded lubeslide - casehardening steel
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Slope - 31.driver and slide: cast iron guides with embedded lubricantworking angle 20 degree - 20.width tool face 65 mm - 065.slide stroke 45 mm - 045.slide return by compession spring - 1Complete Order No -2016.31.20.065.045.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 16 compression spring high tensile steel 27 sliding pad bronze embedded lube 18 sliding pad steel, hardened 19 sliding pad bronze embedded lube 1
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
114
2 .
1683
9.
2000
. 1
�
Slope Cam Slide Unit, Standard 2016.31.10.065.070
New! Slope Cam Slide Unit, part assembled 2016.34.10.065.070
Technical Data:tool face (width x height) 65 x 70slide stroke (max.) 70 mmslide force capacity (max.) 36 kNcompression spring force
preloaded 140 Ncompressed 930 N
weight 21 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Slope, part assembled 34.driver and slide: cast iron guides with embedded lubricantdriver - bronze embedded lubeslide - casehardening steel
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Slope - 31.driver and slide: cast iron guides with embedded lubricantworking angle 10 degree - 10.width tool face 65 mm - 065.slide stroke 70 mm - 070.slide return by compession spring - 1Complete Order No -2016.31.10.065.070.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 16 compression spring high tensile steel 27 sliding pad bronze embedded lube 18 sliding pad steel, hardened 19 sliding pad bronze embedded lube 1
Note: Please state slide type and order number when ordering spare parts.
100
subject to alterations
115
2 .
1684
0.
2000
. 1
�Slope Cam Slide Unit, Standard 2016.31.20.065.070
New! Slope Cam Slide Unit, part assembled 2016.34.20.065.070
Technical Data:tool face (width x height) 65 x 70slide stroke (max.) 70 mmslide force capacity (max.) 36 kNcompression spring force
preloaded 140 Ncompressed 930 N
weight 22 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Slope, part assembled 34.driver and slide: cast iron guides with embedded lubricantdriver - bronze embedded lubeslide - casehardening steel
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Slope - 31.driver and slide: cast iron guides with embedded lubricantworking angle 20 degree - 20.width tool face 65 mm - 065.slide stroke 70 mm - 070.slide return by compession spring - 1Complete Order No -2016.31.20.065.070.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 16 compression spring high tensile steel 27 sliding pad bronze embedded lube 18 sliding pad steel, hardened 19 sliding pad bronze embedded lube 1
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
116
2 .
1684
1.
2000
. 1
�
Slope Cam Slide Unit, Standard 2016.31.10.100.045
New! Slope Cam Slide Unit, part assembled 2016.34.10.100.045
Technical Data:tool face (width x height) 100 x 90slide stroke (max.) 45 mmslide force capacity (max.) 72 kNcompression spring force
preloaded 270 Ncompressed 1130 N
weight 32 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Slope, part assembled 34.driver and slide: cast iron guides with embedded lubricantdriver - bronze embedded lubeslide - casehardening steel
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Slope - 31.driver and slide: cast iron guides with embedded lubricantworking angle 10 degree - 10.width tool face 100 mm - 100.slide stroke 45 mm - 045.slide return by compession spring - 1Complete Order No -2016.31.10.100.045.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 27 sliding pad bronze embedded lube 18 sliding pad steel, hardened 19 sliding pad bronze embedded lube 1
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
117
2 .
1684
2.
2000
. 1
�Slope Cam Slide Unit, Standard 2016.31.20.100.045
New! Slope Cam Slide Unit, part assembled 2016.34.20.100.045
Technical Data:tool face (width x height) 100 x 90slide stroke (max.) 45 mmslide force capacity (max.) 72 kNcompression spring force
preloaded 270 Ncompressed 1130 N
weight 32 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Slope, part assembled 34.driver and slide: cast iron guides with embedded lubricantdriver - bronze embedded lubeslide - casehardening steel
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Slope - 31.driver and slide: cast iron guides with embedded lubricantworking angle 20 degree - 20.width tool face 100 mm - 100.slide stroke 45 mm - 045.slide return by compession spring - 1Complete Order No -2016.31.20.100.045.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 27 sliding pad bronze embedded lube 18 sliding pad steel, hardened 19 sliding pad bronze embedded lube 1
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
118
2 .
1684
3.
2000
. 1
�
Slope Cam Slide Unit, Standard 2016.31.10.100.070
New! Slope Cam Slide Unit, part assembled 2016.34.10.100.070
Technical Data:tool face (width x height) 100 x 90slide stroke (max.) 70 mmslide force capacity (max.) 72 kNcompression spring force
preloaded 230 Ncompressed 1170 N
weight 38 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Slope, part assembled 34.driver and slide: cast iron guides with embedded lubricantdriver - bronze embedded lubeslide - casehardening steel
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Slope - 31.driver and slide: cast iron guides with embedded lubricantworking angle 10 degree - 10.width tool face 100 mm - 100.slide stroke 70 mm - 070.slide return by compession spring - 1Complete Order No -2016.31.10.100.070.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 27 sliding pad bronze embedded lube 18 sliding pad steel, hardened 19 sliding pad bronze embedded lube 1
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
119
2 .
1684
4.
2000
. 1
�Slope Cam Slide Unit, Standard 2016.31.20.100.070
New! Slope Cam Slide Unit, part assembled 2016.34.20.100.070
Technical Data:tool face (width x height) 100 x 90slide stroke (max.) 70 mmslide force capacity (max.) 72 kNcompression spring force
preloaded 230 Ncompressed 1170 N
weight 39 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Slope, part assembled 34.driver and slide: cast iron guides with embedded lubricantdriver - bronze embedded lubeslide - casehardening steel
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Slope - 31.driver and slide: cast iron guides with embedded lubricantworking angle 20 degree - 20.width tool face 100 mm - 100.slide stroke 70 mm - 070.slide return by compession spring - 1Complete Order No -2016.31.20.100.070.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 27 sliding pad bronze embedded lube 18 sliding pad steel, hardened 19 sliding pad bronze embedded lube 1
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
120
2 .
1684
5.
2000
. 1
�
Slope Cam Slide Unit, Standard 2016.31.10.150.045
New! Slope Cam Slide Unit, part assembled 2016.34.10.150.045
Technical Data:tool face (width x height) 150 x 100slide stroke (max.) 45 mmslide force capacity (max.) 120 kNcompression spring force
preloaded 440 Ncompressed 1850 N
weight 63 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Slope, part assembled 34.driver and slide: cast iron guides with embedded lubricantdriver - bronze embedded lubeslide - casehardening steel
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Slope - 31.driver and slide: cast iron guides with embedded lubricantworking angle 10 degree - 10.width tool face 150 mm - 150.slide stroke 45 mm - 045.slide return by compession spring - 1Complete Order No -2016.31.10.150.045.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 27 sliding pad bronze embedded lube 18 sliding pad steel, hardened 19 sliding pad bronze embedded lube 1
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
121
2 .
1684
6.
2000
. 1
�Slope Cam Slide Unit, Standard 2016.31.20.150.045
New! Slope Cam Slide Unit, part assembled 2016.34.20.150.045
Technical Data:tool face (width x height) 150 x 100slide stroke (max.) 45 mmslide force capacity (max.) 120 kNcompression spring force
preloaded 440 Ncompressed 1850 N
weight 66 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):Version - Newtype: Slope, part assembled 34.driver and slide: cast iron guides with embedded lubricantdriver - bronze embedded lubeslide - casehardening steel
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Slope - 31.driver and slide: cast iron guides with embedded lubricantworking angle 20 degree - 20.width tool face 150 mm - 150.slide stroke 45 mm - 045.slide return by compession spring - 1Complete Order No -2016.31.20.150.045.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 27 sliding pad bronze embedded lube 18 sliding pad steel, hardened 19 sliding pad bronze embedded lube 1
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
122
2 .
1684
7.
2000
. 1
�
Slope Cam Slide Unit, Standard 2016.31.10.150.070
New! Slope Cam Slide Unit, part assembled 2016.34.10.150.070
Technical Data:tool face (width x height) 150 x 100slide stroke (max.) 70 mmslide force capacity (max.) 120 kNcompression spring force
preloaded 310 Ncompressed 1880 N
weight 73 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example):version - Newtype: Slope, part assembled 34.driver and slide: cast iron guides with embedded lubricantdriver - bronze embedded lubeslide - casehardening steel
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Slope - 31.driver and slide: cast iron guides with embedded lubricantworking angle 10 degree - 10.width tool face 150 mm - 150.slide stroke 70 mm - 070.slide return by compession spring - 1Complete Order No -2016.31.10.150.070.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 27 sliding pad bronze embedded lube 18 sliding pad steel, hardened 19 sliding pad bronze embedded lube 1
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
123
2 .
1684
8.
2000
. 1
�Slope Cam Slide Unit, Standard 2016.31.20.150.070
New! Slope Cam Slide Unit, part assembled 2016.34.20.150.070
Technical Data:tool face (width x height) 150 x 100slide stroke (max.) 70 mmslide force capacity (max.) 120 kNcompression spring force
preloaded 310 Ncompressed 1880 N
weight 75 kg
DescriptionSlide and guiding parts of the Standard CamSlides are made of high-quality cast iron – at least one of two contacting surfaces hasembedded solid lubricants.The slides are supplied with positive return;the user can decide whether or not to employthis facility in the application.
Ordering Code (example): :version - Newtype: Slope, part assembled 34.driver and slide: cast iron guides with embedded lubricantdriver - bronze embedded lubeslide - casehardening steel
Ordering Code (example):Standard Cam Slide-2016. -2016.type: Slope - 31.driver and slide: cast iron guides with embedded lubricantworking angle 20 degree - 20.width tool face 150 mm - 150.slide stroke 70 mm - 070.slide return by compession spring - 1Complete Order No -2016.31.20.150.070.1
Constructional Parts:
No Designation Material Qty.1 slide spherol. cast iron embedded lube 12 driver spherol. cast iron embedded lube 13 slide bed spherol. cast iron 14 retaining gib spherol. cast iron embedded lube 25 positiv return high tensile steel 26 compression spring high tensile steel 27 sliding pad bronze embedded lube 18 sliding pad steel, hardened 19 sliding pad bronze embedded lube 1
Note: Please state slide type and order number when ordering spare parts.
subject to alterations
124
2 .
1684
9.
2000
. 1
�
subject to alterations
Weibertreu Castle at Weinsberg
FIBRO works at Weinsberg
Indexing tables
The FIBRO of today started up in Weinsberg on a verysmall scale back in 1958. Situated below the historicWeibertreu Castle, the company made precision groundround parts, the forerunners of today’s FIBRO StandardParts range for the toolmaking industry.Progress was rapid and soon FIBRO needed new production facilities. A new factory was built at Hassmersheim on the River Neckar. Once again it was a historic location, this time opposite Hornberg Castle.
Indexing tablesFrom 1962 onwards FIBRO at Weinsberg pioneered thedesign and manufacture of indexing tables and soon gained an enviable reputation.FIBROTAKT: indexing tables with face gear and ultra-high-precision indexing, combined with dependablerigidity. Drive options: pneumatic, hydraulic, electric.Rotation by rack and pinion or worm drive. Manual orNC control.FIBROPLAN: indexing tables with worm drive and NCindexing and drive, for circular milling and divisions ofany size.FIBROTOR: revolving tables or indexing tables withpositive-drive cam, offering very short cycle times evenwhen transporting heavy loads. Suitable for automationwith short cycle times. Thousands of FIBRO units are inuse world-wide as integral key components in high-output machinery.
Standard PartsToday the Standard Parts division operates from the Hassmersheim works which manufactures a comprehensive range of standard parts and maintainsstocks ready for immediate despatch world-wide.The machine tool, mechanical engineering and systemsengineering product range includes machine pillars,guide rails, oilless guide elements and precision partssuch as cutting dies and die bushes, special steel pressure springs, gas springs, forming materials, metalbonding agents and moulding resins, accessories forpressing and toolmaking, tool slides with cam or rollerdrives and independent hydraulic drives.FIBRO has become renowned world-wide for its comprehensive range of products kept in stock and itsreadiness to deliver.
FIBRO – The latest technology – with a tradition of service
125subject to alterations
2 .
1685
0.
2000
. 1
�
Hornberg castle on the opposite side ofthe river
The FIBRO Hassmersheim plant
Standard Parts Automation+Robotics
Automation+RoboticsFIBRO has been active in the field of automation androbotics since 1974 from the Hassmersheim works.Modular construction based on translation units, rotaryunits, grippers and guide gantries with trolleys make foreasy construction of individual machines and completesystems, ranging from simple pick & place units rightthrough to multi-axis robots. These series-manufac-tured modules are available in several sizes for loads upto 3.150 kg, traversing speeds up to 6.5 m/sec and travel of up to 30 m. Module series with electric-motor,hydraulic and pneumatic drive can be combined to suitthe specific requirements. The system has a trackrecord of success in many sectors of industry.
FIBRO is much in demand as a supplier to the mechanical engineering and metalworking sectors.This success is based largely on three factors: FIBRO’sin-depth knowledge of the market, its commitment toquality assurance in line with ISO 9001 and its flexibleand responsive organisational structure so typical ofmedium-sized German companies.
FIBRO: a company with a great history. FIBRO hasdeveloped at a rapid pace in these fast-moving timesand will continue to demonstrate its proactive philo-sophy in the future.
FIBRO – precision technology for the toughest tasks.
More about FIBRO:• 900 staff;• 80 representatives and service stations world-wide;• branch offices in France, USA, Singapore
and Switzerland.
DE
123 Heinrich Siggel GmbHWaldstraße 1 · 14163 Berlin
14000 Tel. 030-802 90 13 · Fax 030-802 90 [email protected]
123 Walter Ruff GmbHPostfach 110266 · 28082 Bremen
28000 Heerenholz 9 · 28307 BremenTel. 0421-438 78-0 · Fax 0421-438 [email protected] · www.praeziruff.de
�23 Außendienst Karl-Heinz Keßler30000 Mehlstraße 8 · 33729 Bielefeld33000 Tel. 0521-764 43 · Fax 0521-770 75 58
Mobil-Tel. 0170-564 34 15
1�� Walter Ruff GmbH PräzisionswerkzeugeBerliner Straße 28 · 31174 Schellerten
31000 Tel. 05123-20 40 · Fax 05123-26 40
1�� Oltrogge & Co.Postfach 102093 · 33520 Bielefeld
33000 Finkenstraße 61 · 33609 BielefeldTel. 0521-32 08-0 · Fax 0521-32 [email protected] · www.oltrogge.de
1�� Schwab GmbHPostfach 1209 · 35323 Mücke
35000 Bergwiesenstraße 10 · 35325 MückeTel. 06400-80 11 · Fax 06400-80 12
�23 Ing. Büro für Automation Dirk Ahke VDIZum Wenzelnberg 2a · 40764 Langenfeld
40000 Tel. 02173-270 41-0 · Fax 02173-270 [email protected]
1�� FIBRO GmbH AuslieferungslagerPostfach 110420 · 42664 Solingen
42000 Heiligenstock 34 · 42697 SolingenTel. 0212-38 20 68-0 · Fax 0212-382 06 [email protected] · www.fibro.com
1�� Außendienst Hartwig HennemannStaubenthaler Höhe 79
42000 42369 WuppertalTel. + Fax 0202-759 55 80Mobil-Tel. 0175-296 59 [email protected]
1�� Normalien-Zentrale-Siegerland Bernd KreitzbergPostfach 1132 · 57225 Wilnsdorf
57000 Rudersdorfer Straße 18 · 57234 WilnsdorfTel. 02739-25 44 · Fax 02739-41 16Mobil-Tel. 0170-274 27 95
1�� Stahlschmidt Industriebedarf und -vertretungenPostfach 65 · 58846 Herscheid
58000 Eichenweg 12 · 58849 HerscheidTel. 02357-30 99 · Fax 02357-22 55Mobil-Tel. 0171-642 57 97e.stahlschmidt@t-online.dewww.stahlschmidt-industrievertretung.de
1�� Außendienst Volker HottesErzberger Straße 1 · 64846 Groß-Zimmern
64000 Tel. 06071-416 10 · Fax 06071-416 10Mobil-Tel. 0171-957 79 [email protected]
�23 Außendienst Guido SteinbrückGartenfeldstraße 28 · 65396 Walluf
65000 Tel. 06123-70 46 90 · Fax 06123-70 46 91Mobil-Tel. 0171-229 45 14Guido.Steinbrü[email protected]
�23 Außendienst Ingmar SchimmerBeethovenstraße 41 · 71711 Steinheim/Murr
71000 Tel. 07144-89 02 64 · Fax 07144-89 02 63Mobil-Tel. 0170-331 42 03
�23 Außendienst Peter FinkenbeinerGrüner Weg 2 · 72218 Wildberg
72000 Tel. 07054-83 07 · Fax 07054-83 07Mobil-Tel. 0170-564 31 [email protected]
1�� Außendienst Matthias EhrenfriedBreisgaustraße 9 · 74172 Neckarsulm
74000 Tel. 07132-98 94 82 · Fax 07132-98 94 82Mobil-Tel. 0171-864 95 [email protected]
1�� Außendienst Manfred WagnerBreslauer Straße 57 · 74372 Sersheim
74000 Tel. 07042-350 86 · Fax 07042-350 86Mobil-Tel. 0170-563 52 [email protected]
1�� Nestle & Koch · Stahllager GmbHMaximilianstraße 159 · 75172 Pforzheim
75000 Tel. 07231-457 67-0 · Fax 07231-457 67 [email protected]
1�� Außendienst Wilhelm VolkRintheimer Hauptstraße 135 · 76131 Karlsruhe
76000 Tel. 0721-61 20 95 · Fax 0721-61 20 95Mobil-Tel. 0710-850 56 86
1�� Hamacher GmbHPostfach 3308 · 78022 VS-Schwenningen
78000 Grabenäckerstraße 47 · 78054 VS-SchwenningenTel. 07720-349 69 · Fax 07720-341 [email protected]
123 Jugard & Künstner GmbHLandsberger Straße 289/l · 80687 München
80000 Tel. 089-546 15 60 · Fax 089-580 27 [email protected]
123 Jugard & Künstner GmbHPostfach 900152 · 90492 Nürnberg
90000 Thomas-Mann-Straße 63 · 90471 NürnbergTel. 0911-86 08 11 · Fax 0911-86 08 [email protected]
1�� HELD WerkzeugmaschinenPräzisionswerkzeuge GmbH
07500 Tivolistraße 1 · 07545 GeraTel. 0365-824 91-0 · Fax 0365-824 91 11e-mail: [email protected] · www.held-wzm.de
�23 Außendienst Stefan SchumannForstweg 44 · 07570 Weida
07500 Tel. 036603-408 02 · Fax 036603-602 37Mobil-Tel. 0170-564 51 [email protected]
AT
123 Rath & Co. Ges. m.b.H.Teiritzstrasse 3 · 2100 KorneuburgTel. 02262-608 · Fax [email protected] · www.rath-co.at
AU
1�� Bruderer Presses Australia Pty. Ltd.92 Trafalgar Street · Annandale, NSW 2038Tel. 04-1940-0995 · Fax [email protected]
�23 Enmor Tool & Machine Co. Pty. Ltd.P.O. Box 39 · Belmont, NSW 2280Tel. 02-4945-5898 · Fax [email protected]
BE
�23 Doedijns Fluitronics NV/SAZoning d’Amay Allée II n° 4 · 4540 AmayTel. 085 51.96.96 · Fax 085 51.96.97
1�� Schiltz S.A.Chaussee de Gand 1034 · 1082 BruxellesTel. 024 64.48.30 · Fax 024 [email protected]
BG
1�� Bavaria 2002 EOODPirotstr. 22 · 5100 Gorna OrjachovizaTel.: 961 84 23 96 · Fax: 961 84 18 [email protected]
BR
�2� Coloman Industria e Comerciode Maquinas e Ferramentas Ltda.Rau A-Nr. 315 · Parque Industrial · Caixa Postal 49Franco da Rocha - SP · CEP - 07851-970Tel. 011-4449-4460 · Fax [email protected]
1�� LCPA Ltda.Rua Maria Maiolino de Souza, 40/Sala 04CEP 13.230-270 São Paulo, SPTel. 011-4039-1896 · Fax [email protected]
CH
�23 FIBRO GmbH ZweigniederlassungBuechstrasse 10 · 5027 HerznachTel. 062-878 18 80 · Fax 062-878 18 [email protected] · www.fibro.com
CH
1�� Brütsch/Rüegger AGIn der Luberzen 1 · 8902 UrdorfTel. 01-736 63 63 · Fax 01-736 63 [email protected] · www.b-r.ch
CL
1�� Bermat S.A.Coyancura 2283, Of. 601 · Casilla 9781 · SantiagoTel. 02-231 88 77 · Fax 02-231 42 [email protected] · www.bermat.cl
CN
12� Forsteppe Precision Engineering Co. Ltd.Room 613 · Golden Gate Square · 389 Jin Wan RoadJin Qiao Pudong New Area, 201206 ShanghaiTel. 021-58 99 44 68 · Fax 021-58 99 44 [email protected]
12� Forsteppe Trading (Guangzhou)Room E, 11/F. · East Tower Tianxing BuildingNo. 21, Zhongshan First Road · 510600 GuangzhouTel. 020-87 32 91 29 · Fax 020-87 32 82 [email protected]
CY
1�� Militos Trading Ltd.K. Erotokritou & A. Demetriou Ltd.P.O.B. 27297 · 1643 NicosiaTel. 02-75 12 56 · Fax 02-75 22 11
CZ
1�3 Gore s.r.o.Prístavní 6 · 63500 Brno-BystrcTel. 05-41 59 25 18 · Fax 05-41 59 25 [email protected] · www.gore.cz
�2� SK Technik, spol. s r.o.Merhautova 20 · 61300 BrnoTel. 05-45 42 95 11 · Fax 05-45 21 12 [email protected] · www.sktechnik.cz
DK
1�� A/S Erling B. IbsenMetalbuen 28 · Postbox 79 · 2750 BallerupTel. 044-97 81 11 · Fax 044-68 06 [email protected] · www.ebi.dk
�2� BONDY A/SIndustriparken 16-18 · 2750 BallerupTel. 7015 1414 · Fax 4464 1416
��3 PMC Technology A/SKlausdalsbrovej 1 · 2860 SøborgTel. 070 21 2121 · Fax 070 21 [email protected] · www.pmctechnology.dk
DZ
1�� Pneumacoupe Blida Boufarik86 Bld. Menad Mohamed · Boufarik, 09400 BlidaTel. 03-47 56 55 · Fax 03-47 56 55
EE
1�� Cle Baltik OueLaki 9A · 10621 TallinTel. 372 509 3228 · Fax 372 650 [email protected]
EG
1�� Smeco68, Abdel Rahman El Raffei St.11351-Heliopolis West, CairoTel. 02-620 00 71 · Fax 02-620 06 [email protected]
ES
123 Daunert Máquinas-Herramientas, S.A.C/. Tirso de Molina s/n Esqina C/. Albert EinsteinPolígono Industrial Almeda08940 Cornellá de Llobregat · BarcelonaTel. 93-475 14 80 · Fax 93-377 64 [email protected] · www.daunert.com
FI
123 OY Christer Lindholm Eng. ABSantalantie 25, PL. 66 · 10901 HankoTel. 019-280 72 00 · Fax 019-248 43 [email protected] · www.clegroup.fi
FR
123 FIBRO SARL19/21, rue Jean Lolive · 93170 BagnoletB.P. no 129 · 93172 Bagnolet CedexTél. 01-43-62-18-80 · Télécop. [email protected] · www.fibro.fr
NormalienStandard PartsEléments normalisés
RundschalttischeIndexing TablesPlateaux diviseurs
Automation+RobotikAutomation+RoboticsAutomatisme+robotique
VertretungenRepresentativesReprésentations
1
2
3
0 · 1
7782
· 04
/200
3 · 1
0 �
PostleitzahlgebietZip CodeCode postal
FR
Secteur Franche Comté1�� Codimec SA
Rue des Maurapans · ZAC de ValentinBP no. 3051 · 25046 Bésançon CedexTel. 03-81-88-83-11 · Télécop. 03-81-88-05-45
GB
1�� Burrhart Machinery Ltd.Cradock Road · Luton · Beds LU4 0JFTel. 1582-56 3400 · Fax 1582-49 39 [email protected] · www.burrhart.co.uk
�23 W. & H. Eves Ltd.15, Macdonald Street · Birmingham B5 6TFTel. 0121-622 45 61 · Fax 0121-666 62 [email protected]
GR
1�� Mek-Maria Koutseris & Co.Pyloy 100 · 10441 AthenTel. 0210-522 05 57 · Fax 0210-522 12 [email protected] · www.mek.com.gr
HK
1�� Forsteppe Enterprise Ltd.Unit 207, 2/F · Shing Chuen Industrial Building25-27 Shing Wan RoadTai Wai Shatin N.T. (Hong Kong)Tel. 0852-26 01 13 68 · Fax 0852-26 01 16 [email protected]
HR
123 Oro-Tech trgovina d.o.o.Ptujska c. 184 · 2000 MariborTel. 062-426 08 43 · Fax 062-426 08 [email protected]
HU
1�� Rath & Co. Ges. m.b.H.Teiritzstraße 3 · 2100 KorneuburgTel. 02 262-608 · Fax 02 [email protected] · www.rath-co.at
ID
1�� Pt. Normalindo Tunas SentosaJintanjung Duren Raya 21 A · Jakarta 11470Tel. 021-564 07 18 · Fax 021-564 07 [email protected]
IE
1�� K & A Engineering Ltd.49 Barrack Street · Waterford CityTel. 051-37 82 55 · Fax 051-37 90 [email protected]
IL
1�3 A. J. Englander 1980 Ltd.13 Harechev Street · Tel Aviv 67771Tel. 03-537 36 36 · Fax 03-537 33 [email protected] · www.englander.co.il
IN
1�� Nitoo Sales · Antaral Plot No 464/B/2Dhotre Marg. Ghaneshkhind Road · Pune - 411016Tel. 020-565 62 39 · Fax 020-565 64 [email protected] · www.nitoo.com
�23 NN Combined Engineering Agencies Private Ltd.Dr. Ranji Block, First Floor125. M. G. Road · Secunderabad 500003 A.P.Tel. 040-27 84 42 79 · Fax 040-27 84 16 [email protected] · www.nncea.com
IR
123 Eximrad Co.268 Dr. Mofatah Ave. · Tehran 15848Tel. 021-882 12 03 · Fax 021-830 97 [email protected]
IT
1�� Millutensil S.R.L.Corso Buenos Aires, 92 · 20124 MilanoTel. 02-29 40 43 90 · Fax 02-204 66 [email protected] · www.millutensil.com
�23 NC Componenti S.R.L.Via F. Raimondo, 11/B · 10090 Cascine Vica-Rivoli (TO)Tel. 011-957 52 22 · Fax 011-957 51 [email protected] · www.nccomponenti.it
JP
�2� Tomita Co. Ltd.No. 1-18-16 · 1-Chome Ohmorinaka Ohta-Ku · TokioTel. 03-37 65 49 11 · Fax 03-37 67 83 [email protected]
KR
1�� Dooki Korea Ltd.313-4 Dangsan 6GA · Youngdungpo-Ku · Seoul 150-046Tel. 02-26 79 52 64 · Fax 02-26 79 60 [email protected]
�2� Jinsung Trading Corp.Dong Woo Bld. 303#520-2, 2AV Choryang Dong Gu, PusanTel. 8251-466-5462/3 · Fax [email protected]
��3 Intech Automation Inc.13 FL. Jeil Bd., 94-46, Youngdeungpo7-Ga, Youngdeungpo-ku · Seoul 150-037Tel. 02-26 32 67 70 · Fax 02-26 32 68 [email protected]
MY
123 FIBRO Asia Pte. Ltd.121, Genting Lane, 2nd Floor · Singapore 349572Tel. 065 68 46 33 03 · Fax 065 68 46 33 [email protected] · www.fibro.com
NL
�23 Item Systems B.V.Zwarte Zee 40-42 · 3144 DE MaassluisTel. 010-593 72 60 · Fax 010-592 85 [email protected] · www.item-international.com
1�� Jeveka B.V.Postbus 22966 · Keienbergweg 81100 DL-Amsterdam · 1101 GB AmsterdamTel. 020-342 03 42 · Fax 020-342 03 [email protected] · www.jeveka.com
NO
�2� Kaspo Maskin ASHoeggveien 66 · 7489 TrondheimTel. 73 96 96 00 · Fax 73 96 96 [email protected] · www.kaspo.no
1�� Wolf VerktoyPostboks 602, Busterud · 1754 HaldenTel. 69 17 89 19 · Fax 69 17 89 45
NZ
1�� Gatmans Ltd.Precision Engineering SuppliesP.O.B. 101-822 · North Shore Mail Centre · AucklandTel. 09-444 10 29 · Fax 09-444 11 37
PE
1�� Ing. E. Brammertz S.c.r.l.Av. José Pardo 182 · OF. 905Apartado 0173 · Miraflores, Lima 18Tel. 014-45 81 78 · Fax 014-45 19 [email protected]
PL
1�� Laska Technika Przemyslowa Sp.z.o.o.ul. Budowlanych 43 · 43-100 TychyTel. 032-326 24 50 · Fax 032-326 24 [email protected] · www.laska.com.pl
PT
1�� Ferrometal Lda.Estrada Manuel Correia LopesRua da Rosita, Lote 12 · Conceição da Abóboda2725-543 S. Domingos de Rana-CascaisTel. 21-444 71 60 · Fax 21-444 71 [email protected]
PT
�2� Seri Lda.Zona Industrial da VarzielaAv. José Ramos Maia – Lote no 3, Apartado 1974481-911 Vila do CondeTel. 0252 24 85 40 · Fax 0252 24 85 [email protected]
RO
1�� Proiect Alide SrlMitr. Endrej Saguna Nr. 24 · Sect. 1 BucarestiTel. 21-222 21 18 · Fax 21-222 07 [email protected]
SA
1�� Abdullah Yahya Munshi EstP. O. Box 20123 · 21455 JeddahTel. 2-643 62 42 · Fax 2-643 62 [email protected]
SE
�23 Dankab Verktygsmaskiner ABBox 4002 · 18104 LidingöLarsbergsvägen 12b · 18139 LidingöTel. 08-54 44 03 40 · Fax 08-54 44 03 [email protected] · www.dankab.se
1�� Lideco ABVerkstadsvägen 4 · 51463 DalstorpTel. 0321-53 03 50 · Fax 0321-603 [email protected] · www.lideco.se
SG
123 FIBRO Asia Pte. Ltd.121, Genting Lane, 2nd Floor · Singapore 349572Tel. 68 46 33 03 · Fax 68 46 33 [email protected] · www.fibro.com
SI
123 Oro-Tech trgovina d.o.o.Ptujska c. 184 · 2000 MariborTel. 062-426 08 43 · Fax 062-426 08 [email protected]
SK
1�3 Gore s.r.o.Prístavní 6 · 63500 Brno-BystrcTel. 05-41 59 25 18 · Fax 05-41 59 25 [email protected] · www.gore.cz
�2� SK Technik, spol. s.r.o.Merhautova 20 · 61300 BrnoTel. 05-45 21 16 66 · Fax 05-45 21 12 [email protected] · www.sktechnik.cz
TR
1�� Ender Kesici Ve Teknik · Takimlar Ltd. Sti.Tersane Caddesi No. 16 · 80000 Karaköy/IstanbulTel. 0212-253 26 00 · Fax 0212-254 57 [email protected] · www.enderltd.com
�23 Fikret Erdogan ve Ort. Koll. Sti.Otakçilar Cad. No. 56 · 34050 Eyüp-IstanbulTel. 0212-544 87 53 · Fax 0212-567 99 [email protected]
TV
1�� SunNan Enterprises Co. Ltd.2F, No. 7, Alley 6, Lane 235 · Pao-Chiao RoadHsin-Tien City · TaipeiTel. 02-29 17 6454 · Fax 02-29 11 03 [email protected]
US
123 FIBRO Inc.139 Harrison Ave. · Rockford, IL 61104P. O. B. 5924 · Rockford, IL 61125Tel. 815-229 13 00 · Fax 815-229 13 [email protected] · www.fibro.com
YU
1�� Andrija Tesic, Dipl. Ing.Partisanska 12/a-II · BeogradTel. 011-533 83 62 · Fax 011-533 83 62
ZA
123 Herrmann & Herrmann Pty. Ltd.24, Shaft Road · P. O. B. 13030 · Knights 1413Tel. 011 828 01 00 · Fax 011 828 60 [email protected] · www.hermstools.com
FIBROGmbH
1 Normalien · Standard Parts · Eléments normalisésPostfach 1120 · D-74851 HassmersheimAugust-Läpple-Weg · D-74855 HassmersheimTel. (+49)6266-73-0*· Fax (+49)6266-73-237
2 Rundschalttische · Indexing Tables · Plateaux diviseursPostfach 1120 · D-74183 WeinsbergWeidachstrasse 41-43 · D-74189 WeinsbergTel. (+49)7134-73-0*· Fax (+49)7134-73-120
3 Automation+Robotik · Automation+Robotics · Automatisme+robotiquePostfach 1120 · D-74851 HassmersheimAugust-Läpple-Weg · D-74855 HassmersheimTel. (+49)6266-73-0*· Fax (+49)6266-73-213
0 · 1
7783
· 04
/200
3 · 1
0 �
0·1
1771
·02/
2002
·7
�
FIBRO GmbH
2 Indexing Tables
Postfach 1120D-74183 Weinsberg
Weidachstrasse 41–43D-74189 Weinsberg
Phone +49 7134 -73 -0*Fax +49 7134 -73 -120
e-mail: [email protected]://www.fibro.com
1 2 3
1
FIBRO Inc.
P.O.Box 5924Rockford, IL 61125
139 Harrison AvenueRockford, IL 61104
Phone 815 -22913 00Fax 815 -22913 03
e-mail: [email protected]://www.fibro.com
3 Automation+Robotics
Postfach 1120D-74851 Hassmersheim
August-Läpple-WegD-74855 Hassmersheim
Phone +49 62 66 -73 -0*Fax +49 62 66 -73 -213
e-mail: [email protected]://www.fibro.com
1 Standard Parts
Postfach 1120D-74851 Hassmersheim
August-Läpple-WegD-74855 Hassmersheim
Phone +49 62 66 -73 -0*Fax +49 62 66 -73 -139
e-mail: [email protected]://www.fibro.com
FIBRO SARL
BP no 12993172 Bagnolet Cedex
19/21, rue Jean Lolive93170 Bagnolet
Téléphone 0143 6218 81Télécopieur 0148 591747
e-mail: [email protected]://www.fibro.fr
1 2 3FIBRO ASIA Pte.Ltd.
121 Genting Lane2nd floorSingapore 349572
Phone +65-68 46 33 03Fax +65-68 46 33 02
e-mail: [email protected]://www.fibro.com
SGUS
FR
2 3FIBRO SARL
BP no 12993172 Bagnolet Cedex
19/21, rue Jean Lolive93170 Bagnolet
Téléphone 0143 6218 89Télécopieur 01481873 46
e-mail: [email protected]://www.fibro.fr
FR