,Ar CAM LOCKS & LOCK CORES 156 PK Lock Cores Pages 158 - 159 PK PK PK PK PK Different latch and lock core styles offer a variety of key code choices and implementation options for optimum security and flexibility. Lock core options include:  Keyed alike  Keyed differently  Master keyed, keyed differently  Shuttered and non-shuttered  Tool access  Multiple finishes
16
Embed
CAM LOCKS & LOCK CORES - Above Board Electronics · ,Ar 156 CAM LOCKS & LOCK CORES PK Lock Cores Pages 158 ... Â The option to configure multiple latch styles with the same keying
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
0 ,Ar
CAM LOCKS & LOCK CORES156
PK Lock Cores Pages 158 - 159
PK PK PK PK PK
Different latch and lock core styles offer a variety of key code choices and implementation options for optimum security and flexibility.
Lock core options include:
 Keyed alike  Keyed differently  Master keyed, keyed differently  Shuttered and non-shuttered  Tool access  Multiple finishes
157
 7-Pin tumbler design enhances key-locking security  Broad range of sizes fits a variety of enclosure
applications  Flexible key code options  Attractive chrome finish
CM Cam Locks Pages 162 - 169
PT Tubular Key Cam LocksPages 170 - 171
CM-3CM-2CM-9 CM-9
PT-1
CM-5CM-1 CM-6
 Broad range of sizes fits a variety of enclosure applications
 Multiple access control styles: Key, tool or hand actuation  Flexible key code options  Modular design reduces inventory investment  Options to meet environmental sealing requirements  Attractive aesthetic finishes
SOUTHCO® CM Cam Locks provide a basic key-locking or manual solution for a wide range of applications.
SOUTHCO® CM Cam Lock options include:
SOUTHCO® PT Tubular Key cam locks offer a higher security solution with multiple options.
SOUTHCO® PT Tubular Key cam lock options include:
!Ty
sou Lhos CONNECT • CREATE • INNOVATE
INFO CLIC
158
Dimensions in millimeters (inch) unless otherwise stated
Key-Choice System
This icon indicates that a product is compatible with the SOUTHCO® Key-Choice System For other lock core styles visit www.southco.com
For additional details on the SOUTHCO® Key-Choice System go to www.security.southco.com
www.southco.com/PK
• Lock cores ordered separately• Greater flexibility in locking requirements
Material and FinishZinc alloy, chrome plated, black powder coated or with a stainless steel scalp
PK Lock CoresSOUTHCO® Key-Choice System
Compression Cam Push-to-close Locks
62 Lift and Turn Latch page 97
C2 Lever Latch page 106
C5 Sealed Lever Latch page 104
E5 Wing Style Latch page 126
E5 T-Handle Latch page 125
E5 L-Handle Latch page 124
E5 Flush Cup Wing Style page 122
R3-20 Baggage Door Latch page 238
AC-10 Actuator page 264
AC-15 Actuator page 265
CM-3 Sealed page 164
CM-6 Non-sealed page 164
The SOUTHCO® Key-Choice System features a common lock core that fits a wide range of SOUTHCO® latches. This system allows for the independent selection of the correct latch for your application and the lock core required to manage the security of the end product. The guide below shows each of the latches in the SOUTHCO® Key-Choice System that can be purchased without the lock core installed. Lock cores are sold separately which provides:
 The option to configure multiple latch styles with the same keying option  The ability to configure the same latch style with multiple keying options  Inventory reduction by managing multiple keying options with the lock core, while latches remain
without the core installed until keying assignment is desired
Latches in the SOUTHCO® Key-Choice System
Other options available. For complete details on variety, part numbers, installation and specification, go to
Keying Key code Bag qty Shuttered stainless steel scalp Non shuttered stainless steel scalp Non shuttered black powder coated Non shuttered chrome plated
KA CH751 1 PK-39-72-13-KCH751 PK-132-13 PK-115-13 PK-116-13
KA RS001 1 PK-39-72-13-RS001 PK-132-13-RS001 PK-29-15-13-RS001 PK-29-16-13-RS001
 Multiple key codes  Tool actuation  Change key codes in future  Configure to order
 Single key code  Key-locking  Wing driver  Integrated housing and lock core
www.southco.com/CM
Keyed alike
Keyed differently
Master keyed, keyed differently
Phillips recess
Slotted
4mm Hex recess
8mm Hex recess
Cam Lock Options
CM Cam LocksSelection
• Removable core options provide maximum flexibility • Fixed core options provide simple, economic solutions• Sealed housings are available • Multiple finishes • A broad selection of
lock housing and cam sizes available
NotesAll CM Cam Lock housings, cams, and lock core components can be ordered separately for maximum configuration flexibility with minimal inventory investment. To determine the perfect CM Cam Lock components for your needs, simply follow the Selection Guide on the next page.
Other options available. For complete details on variety, part numbers, installation and specification, go to
Also use the online configurator at www.southco.com
Selection Guide
Cam Lock Selection Guide
1. Once you have determined the CM Cam Lock version that best meets your needs, calculate the Cam Grip for your application using the illustration below.
Notes: add 0.5 (.02) to your grip when using a sealed product.
2. In the TAN section below, locate the Cam Grip calculated for your application. If your grip falls between two values, use the higher value.
Notes: Certain grip values repeat in the table below. Use the value that results in the shortest housing possible based on the Max. Door Thickness allowed.
3. From this value, move right horizontally into the GRAY section and verify your door thickness falls within the Max. Door Thickness listed. Once this is verified, the housing length is selected and is illustrated by the Housing Length Number.
4. Returning to your original grip value in the TAN section, move down vertically into the GREEN section. The GREEN section illustrates the cams that are appropriate for your grip.
5. By determining the required cam orientation and length in the BLUE section, the appropriate Cam Part Number for your application is selected.
6. Proceed to the Cam Lock sections (CM-6, CM-3, CM-2, CM-5, and CM-1) to complete your Part Number selection.
Dimensions in millimeters (inch) unless otherwise stated
www.southco.com/PT
PT Tubular Key Cam LocksCams & installation
PT - S C 09
Installation Material1. In the TAN section, locate the cam grip calculated for your application. If your grip falls between two values, use the higher value. Notes: For cam grips that can be achieved with multiple housing lengths, use the value that results in the shortest housing possible based on the Max. door thickness allowed.
2. From this value, move right horizontally into the Gray section and verify your door thickness falls within the Max. door thickness listed. Once this is verified, the housing length is selected and is illustrated by the housing length number.
3. Returning to your original grip value in the TAN section, move down vertically into the GREEN section. The GREEN section illustrates the cams that are appropriate for your grip.
4. By determining the required cam orientation and style in the BLUE section, the appropriate cam for your application is selected.
Cam Grip Max. Door Thickness Housing Length Number