-1043 1 -1044-1 1 Part Number - D CFUAS10 - 22 Part Number - D CFUH20 - 52 Cam Followers Hex Socket on Head Cam Followers Hex Socket on Head / Thread (Crowned Type with Grease Fitting) Q Features: Hex socket and grease fitting are mounted on both the head and thread part. You can secure it from either head or thread side using a hex wrench. Greasing is possible from both directions. QCrowned Application Type MMaterial AAccessory With Seal No Seal General CFUA CUA SUJ2 1 Hex Nut (S45C Carbon Steel, Black Oxide) CFUAS CUAS SUS440C Equivalent Hex Nut 1 pc. (SUS304) Low Dust Generation CFUAC - Heavy Load CFUAG - SUJ2 1 Hex Nut (S45C Carbon Steel, Black Oxide) R250 (d3~5) R500 (d6~10) r H B1 D 0 -0.05 B 0 -0.12 l dh7 L M H R250 (d3~5) R500 (d6~10) r B1 D 0 -0.05 B 0 -0.12 l dh7 L M EFull Roller for Heavy Load. QWith Seal QNo Seal ENo grease hole is provided. EOperating Temp.: 80°C or lower f CFUA QFlat Application Type MMaterial AAccessory With Seal No Seal General CFFA CFA SUJ2 1 Hex Nut (S45C Carbon Steel, Black Oxide) CFFAS CFAS SUS440C Equivalent Hex Nut 1 pc. (SUS304) Low Dust Generation CFFAC - Heavy Load CFFAG - SUJ2 1 Hex Nut (S45C Carbon Steel, Black Oxide) QCrowned Type MMaterial AAccessory Application With Seal No Seal General CFUH CUH SUJ2 1 Hex Nut (S45C Carbon Steel, Black Oxide) CFUSH CUSH SUS440C Equivalent Hex Nut 1 pc. (SUS304) Low Dust Generation CFUCH - Heavy Load CFUGH - SUJ2 1 Hex Nut (S45C Carbon Steel, Black Oxide) EOperating Temp.: 80°C or lower M L L r R1000 R500 B-0.12 0 1 (d12~18) (d20) B1 H H d -0.05 0 D dh7 L1 Grease Fitting L L r M R1000 R500 B-0.12 0 1 L1 -0.05 0 (d12~18) (d20) B1 H H d D dh7 Grease Fitting QWith Seal QNo Seal f CFUH EThe standards of d12 to 20 have been modified to those with the hex socket on the head and thread. For the new part number, see WP.1044. EDimensions in ( ) are for Stainless Steel Type. Part Number D (Selectable) MxPitch B B1 L l r f (Min.) H Unit Price Type dh7 Tolerance CFUA CFUAS CFUAC CFUAG CUA CUAS (With Seal) CFUA CFUAS CFUAC CFUAG (No Seal) CUA CUAS 3 0 -0.010 10 3x0.5 7 8 17 5 0.3 6.8 2 (1.5) - 4 0 -0.012 12 4x0.7 8 9 20 6 0.5 8.6 2.5 (2) - 5 13 5x0.8 9 10 23 7.5 9.7 3 (2.5) - 6 16 6x1.0 11 12 28 9 11 3 8 0 -0.015 19 8x1.25 32 11 13 4 10 22 10x1.25 12 13 36 13 1 15 5 26 - Part Number D (Selectable) MxPitch B B1 L d1 l l1 r f (Min.) H Mass (g) Max. Tightening Torque (N • cm) Unit Price Type dh7 Tolerance CFUH CFUSH CFUCH CFUGH CUH CUSH (With Seal) CFUH CFUSH CFUCH CFUGH (No Seal) CUH CUSH 12 0 -0.018 30 12x1.5 14 15 40 3 14 6 1.5 20 6 105(107) 29.4 32 115(117) 16 35 16x1.5 18 19.5 52 18 8 24 205(207) 70.6 18 40 18x1.5 20 21.5 58 20 26 295(300) 98 20 0 -0.021 47 20x1.5 24 25.5 66 4 22 9 36 8 450(455) 137 52 525(530) 24 62 24x1.5 29 30.5 80 25 11 40 915(925) 245 72 1150(1160) 30 80 30x1.5 35 37 100 32 15 2 46 1880(1890) 480 85 1950(1960) 90 2000(2010) EFor the performance of Cam Followers, see Table 1 on WP.1043. ENo grease hole is provided. EOperating Temp.: 80°C or lower EFull Roller for Heavy Load. r B1 B l dh7 L M (*)D r B1 B 0 -0.12 0 -0.12 l dh7 L M (*)D H H QWith Seal QNo Seal f CFFA (*) D Tolerance 10~16 0 - 0.008 19~26 0 - 0.009 EThe standards of d12 to 20 have been modified to those with the hex socket on the head and thread. For the new part number, WP.1044. EDimensions in ( ) are for Stainless Steel Type. Part Number D (Selectable) MxPitch B B1 L l r f (Min.) H Unit Price Type dh7 Tolerance CFFA CFFAS CFFAC CFFAG CFA CFAS (With Seal) CFFA CFFAS CFFAC CFFAG (No Seal) CFA CFAS 3 0 -0.01 10 3x0.5 7 8 17 5 0.3 6.8 2(1.5) - 4 0 -0.012 12 4x0.7 8 9 20 6 0.5 8.6 2.5(2) - 5 13 5x0.8 9 10 23 7.5 9.7 3(2.5) - 6 16 6x1.0 11 12 28 9 11 3 8 0 -0.015 19 8x1.25 32 11 13 4 10 22 10x1.25 12 13 36 13 1 15 5 26 Ekgf=Nx0.101972 Table1: Reference Data of Cam Followers d-D General Heavy Load Basic Dynamic Load Rating C (kN) Basic Static Load Rating Cor (kN) Max. Allowable Load (kN) Track Load Capacity (kN) Max. Rotational Speed (rpm) Mass (g) Basic Dynamic Load Rating C (kN) Basic Static Load Rating Cor (kN) Max. Allowable Load (kN) Track Load Capacity (kN) Rotational Speed Limit (with Seal) (rpm) Mass (g) With Seal No Seal Crowned Flat Crowned Flat 3-10 1.47 1.18 0.36 0.37 1.37 32900 47000 4.5 - - - - - - - 4-12 2.06 2.05 0.78 0.47 1.76 25900 37000 7.5 - - - - - - - 5-13 3.14 2.77 1.42 0.53 2.25 20300 29000 10.5 - - - - - - - 6-16 3.59 3.58 2.11 1.08 3.43 17500 25000 18.5 6.94 8.50 2.11 1.08 3.43 4400 19 8-19 4.17 4.65 4.73 1.37 4.02 14000 20000 28.5 8.13 11.20 4.73 1.37 4.02 3480 29 10-22 5.33 6.78 5.81 1.67 4.70 11900 17000 45 9.42 14.30 5.81 1.67 4.70 2880 46 10-26 2.06 5.49 60 9.42 14.30 5.81 2.06 5.49 61 12-30 7.87 9.79 9.37 2.45 7.06 9800 14000 95(105) 13.40 19.80 9.37 2.45 7.06 2320 107 12-32 2.74 7.45 105(115) 13.40 19.80 9.37 2.74 7.45 117 16-35 12.0 18.30 17.30 3.14 11.2 7000 10000 170(205) 20.60 37.60 17.30 3.14 11.20 1800 207 18-40 14.7 25.2 26.1 3.72 14.4 5950 8500 250(295) - - - - - - - 20-52 20.7 34.8 32.1 8.23 23.2 4900 7000 460(525) - - - - - - - E( ) is the weight of Hex Socket on Head and Thread. Part Number Substitution Table for Cam Follower Standard Changes (D30~40,52 only) Type Old Part Number (D30~40,52) New Part Number Old Standard Old Hex Socket Type Old Hex Socket on Thread Hex Socket on Head and Thread Cam Followers CFUR CFUA CFUB CFUH CFURS CFUAS - CFUSH CFURC CFUAC - CFUCH - CFUAG - CFUGH CFU CUA - CUH CFUS CUAS - CUSH CFFR CFFA CFFB CFFH CFFRS CFFAS - CFFSH CFFRC CFFAC - CFFCH - CFFAG - CFFGH CFR CFA - CFAH CFRS CFAS - CFASH