CALIBRATION Calibration is the process of establishing the relationship between a measuring device and the units of measure. This is done by comparing a device or the output of an instrument to a standard having known measurement characteristics. The quality of the calibration needs to be known and is quantified by an uncertainty estimate for the calibration. To improve the quality of the calibration and have the results accepted by outside organizations, Reliable conducts the calibration and subsequent measurements to be "traceable" to the internationally defined measurement units which are accomplished by a formal comparison to a standard which is directly or indirectly related to national / international standards. NEED FOR CALIBRATION RELIABLE offers laboratory and on-site calibrations for various test and process equipments. Calibration is regular need of manufacturing units, processing units, storage units (cold storages etc.), Quality control laboratories associated with manufacturing and processing, testing laboratories, Calibration laboratories, Pathology laboratories and hospitals, service providers and Instruments manufacturers. CATEGORIES RELIABLE offers calibration services in different categories of v Electrical – Fluke’s Multifunction Calibration System-9100, Fluke’s reference multimeter of 8 & 1/2 digits-8508A for calibration of analog/digital instruments for AC/DC voltage, AC/DC current, resistance and capacitance parameters. v Temperature – Calibration of analog/digital controllers, dial thermometers, glass thermometers, RTDs and various types of thermo -couples from ambient to 1000°C temperature range. v Pressure / Vacuum – Calibration of industrial pressure / vacuum gauges, test gauges, master gauges, pressure transducers for the range from vacuum to 600 kgf/sq cm. v Mass & Volume – With E-2 class weights and electronic balance of 1μg readability up to 5 g and 0.01 mg readability up to 200 g for calibration of balances and weights, volumetric glass wares like volumetric flasks, cylinders, pipettes and burettes. v Various test equipments like UV-VIS spectrophotometers, pH meter, Nephalometer, Conductivitymeter etc.