http://www.cau2011.com/ “Truly enjoyed all the information shared, best of show goes to the interaction with all the Staff and Attendees at this conference. All had great information to share and look forward to sharing more with all in the future.”
http://www.cau2011.com/
“Truly enjoyed all the information shared, best
of show goes to the interaction with all the Staff
and Attendees at this conference. All had great
information to share and look forward to
sharing more with all in the future.”
http://www.cau2011.com/
Agenda
Introduction
CADWorx and Analysis University 2011 Overview
CAESAR II and PV Elite sessions overview
What our past and new attendees are saying
Why you should attend
Conclusion
http://www.cau2011.com/
Conference Overview
CAESAR II • PV Elite • CADWorx
100% focused on you and your learning
Management focused tracks
55+ Sessions
190 hours of hands on labs and lectures
Opportunities for ongoing learning
Discover Intergraph’s vision for Analysis
http://www.cau2011.com/
Experience. Accelerated
Who should attend:
Piping and vessel engineers and designers
Safety and maintenance officers
New or experienced engineers
New or experienced PV Elite or CAESAR II users
Why you or your staff should attend:
Gain valuable experience quickly
Lessons from industry experts
Learn from developers
Develop real-world effectiveness
Learn how to collaborate for project efficiency
http://www.cau2011.com/
CAESAR II Sessions
Increase CII Knowledge
Expansion Joints - Basic Sizing Spring Pipe Supports in CAESAR II Introducing eCustomer – Using its Capabilities Nonlinear Conditions and Solving Non-convergence CAESAR II Round Table Discussion
Increase Technical Knowledge
Manufacturing Pipe Supports and Expansion Joints Expansion Joints - Advanced Benefits of time-history analysis over other methods Evaluating Vessel Nozzles Markl Fatigue Methods and ASME Piping Stress Intensification Factors Data Mining Document Resources Nuclear Certification (NQA) of CAESAR II Seismic Analysis Using B31E, ASCE 7 & NBC
Increase Value
Creating an Accurate Fatigue Analysis of Offshore Piping Evaluating FRP Pipe Systems Qualifying Dynamic Response in New Designs Transient Hydraulic Analysis for CAESAR II Evaluation Interfacing CAESAR II & SmartPlant3D Isogen Spools with I-Configure Design in CAESAR II – Loop Wizard Screening Tools in CAESAR II Design in CAESAR II – New in CAESAR II
http://www.cau2011.com/
PV Elite Sessions
Increase PV Knowledge
Understanding the basics of Wind Loads and Earthquake Loads Local Stress Analysis PV Elite Round Table Discussion
Increase Technical Knowledge
ASME Code Section VIII Division 1 Basics ASME 2011 code updates Evaluating Vessel Nozzles Fatigue Analysis Fitness for Service Stack Evaluation Heat Exchanger Fabrication From Start to Finish Code Differences
Increase Value
PV Elite Tips and Tricks What's new in PV Elite 2011/2012
Flange Design
http://www.cau2011.com/
Attending Companies (2010)
* AEC Cafe
* AECsoft Engineering Software Co.
* American Warrior
* Anadarko Petroleum Inc.
* Audubon Engineering
* Autodraft inc
* AutoSoftware Technology Co.,LTD.
* Barr Engineering
* BIS TEPSCO INC.
* Briggs of Burton Plc
* Brinderson Engineers and
Constructors
* CenterPoint Energy
* Chesapeake Energy
* Chevron
* CodeCAD Inc.
* Commonwealth Engineering and
Construction
* ConocoPhillips
* Cortex Engineering Software
* D. Nesbitt Associates
* Daniel Measurement and Control
* DELITE SOFT S.R.L.
* Design Data
* Dojocam Ent.
* ECAD
* ECE Design
* Ecodyne Ltd
* El Paso Corporation
* Enerflex Energy Systems
* Exterran
* FIATECH
* Fichtner Consulting Engineers (India) Pvt.
* FLSmidth
* Gas Liquids Engineering Ltd.
* Golden Gate CAD
* Gulf Interstate Engineering
* GWD Design Inc.
* Hajoca Waterworks
* Hamon Research-Cottrell, Inc.
* Harder Mechanical Contractors, Inc.
* Harris Group, Inc
* Harry Grodsky & Co., Inc.
* Hunt, Guillot & Associates
* Hydrocarbon Engineering
* ICD Asia Pacific
* ICM Inc.
* IMTT
* Intergraph CAS, Inc.
* Intergraph PPM
* International Matex Tank Terminals
* Intratech Corp.
* IT Exchange Group
* JFMPE INC
* John Zink
* KBR
* Ke-Rem Technical Services Ltd
* Kinder Morgan
* KingCadPlus
* KLG Systel Ltd
* Lauren Engineers & Constructors
* LDIS LLC
* Lee College
* Leica Geosystems
* Mech Tech Group
* MKEC Engineering Consultants
* ModeloSoft
* MPA Consulting Engineers Inc.
* Mustang Engineering* Nassau
Engineering
* Online Systems Inc.
* O'Rourke Engineering Ltd.
* Owasso Drafting & Design
* Petrochem Development
* Petro-Chem Development Co., Inc.
* PipingDesigners.com
* Plant Design Solutions
* Process Industry Practices (PIP)
* PTE, Inc.
* Pumps & Systems
* R & D Consulting
* Richard Design Services
* S-CON, Inc.
* Society of Piping Designers &
Engineers (SPED)
* Summit CS
* Ten Links
* Tundra Engineering Associates Ltd.
* Wardrop Engineering
* Western Refining
* Williams Northwest Pipeline
* Z+F
http://www.cau2011.com/
Attendee Feedback
Dan Edgar
Principal Engineer Piping Solutions
Senior Flexonics Pathway (www.sfpathway.com)
“The 2009 CAESAR II conference was an excellent opportunity to
advance my knowledge of pipe stress engineering and to become more
efficient in my daily activities. I had the opportunity to investigate and
question experts on topics that I need improvement on.”
Dan uses CAESAR II and is an instructor at this year CAU.
Senior Flexonics Pathway is recognized as the industry leader in the design
and manufacture of high-quality metal and fabric expansion joints and damper
products.
http://www.cau2011.com/
Attendee Feedback (cont.)
Jack Hollenbeck
Engineering Technology Technician & Software Trainer
Exterran (www.exterran.com)
Exterran uses CAESAR II, PV Elite and 108 CADWorx Plant Pro and
26 P&ID
Exterran is a leading global provider of products and services to the oil
& gas industry with decades of experience offering solutions for
production, processing, compression, critical process, water treatment,
and aftermarket parts and services.
http://www.cau2011.com/
Attendee Feedback (cont.)
Tina Tolpa
CEO, Tolpa Technical Services, LLC (www.tolpatechnical.com)
Tolpa Technical Services uses CAESAR II, PV Elite, PV Fabricator,
CADWorx (P&ID Pro, Plant Pro) and TANK
Tolpa Technical Services, LLC is registered with the Texas State Board
of Professional Engineers. In addition to conventional piping, structural
and vessel design, TTS tackles complex structural, mechanical, piping
and vessel analysis (seismic, stability, force, fatigue, vibration, marine,
wind, wave, ice, lifting and transportation) by integrating deliverables
from Cadworx, PVElite, Caesar II and Tank with finite element analysis
http://www.cau2011.com/
CAU2011, September 19-21
$500 off future CAESAR II seminars
$300 off future PV Elite seminars
PDH Certificates available
Analysis specific round-table discussions
Meet & network with Analysis leaders
Interface with Analysis experts
Interact with CAU2011 vendors
Participate in golf tournament
Attend social evening events
Networking opportunities
http://www.cau2011.com/
Managers Day – Sept. 19th
Attend keynote presentations,
Participate in the round-table product discussions,
Attend Drivers of Success Competition winners panel
Participate in the opening night social event,
Attend one-on-one meetings with product owners (please schedule in advance)
Attend Monday sessions.