-
CABRINHA INTELLIGENCE AGENCYMaui, Hawaii
OFFICE OF THE DIRECTOR
I believe that the difference between a good kite and a great
kite is its ability to intuitively react to the riders wishes with
minimal effort and input. When it comes to security and handling it
should be a seamless set of commands that flow with not against the
natural direction of your body movements.
Introducing IDS. The Intelligent Depower System from Cabrinha.
IDS intuitively provides a level of control and handling not seen
in any other kite. IDS is a simple bridle with features that are
controlled by our all new Powerdrive IDS control system. IDS
delivers huge gains in all areas of steering, bar pressure,
interactive depower and absolute depower.
The standout feature of the new IDS system is its two stages of
depower. Depower on Demand (Stage 1), uses the same method of
interactive depower that was made popular by the Cabrinha bow
kites. Absolute Depower (Stage 2), takes it one step further.
Absolute Depower is a method to self land your kite on the water or
land by releasing all of the residual power of your kite when
landed. Absolute Depower delivers security similar to a 5th line
system, but without the complexity of the unnecessary 5th line.
The simple controls for this incredible system are found on the
all new Powerdrive IDS control system. The Powerdrive IDS also
features ergonomic floating bar ends and our industry leading QR,
with its highly acclaimed security and ease of use.
Our board program this season changes the game with the release
of our Sync Backless Binding. The Sync Backless Binding creates an
entirely new method of connection to your board. This unique board
connection provides a perfect compliment to the new channel bottom
shapes of the Custom, Caliber and the all new Plasma light wind
twin tip models.
2009 is the year where we mix our superior Bow kite outlines
with the all new IDS method of security to deliver the very best of
performance and control. At Cabrinha, we never stop our relentless
pursuit of greatness and our quest for innovation that matters has
led us to our best line of products yet.
Regards,
Pete CabrinhaDIRECTOR, IDS OPERATIONS
1
-
2
-
- KITES OVERVIEW 4- BOARDS OVERVIEW 8TECHNOLOGY- IDS 12- BOW
SUPREMACY 16- SPRINT 18- DURABILITY 20KITES- CROSSBOW IDS 22-
SWITCHBLADE IDS 28- CONVERT IDS 34- CONTROL SYSTEM 42
BOARDS- SYNC BINDINGS 46- BOARD TECHNOLOGY 48- S-QUAD 50- CUSTOM
52- CALIBER 54- PRODIGY 56- PLASMA 58- SNOW KITE 60ACCESSORIES -
HARNESSES 64- TRAVEL BAGS 68- SOFT GOODS 74
CONTENT
3
-
- IDS BrIDle- DYNAMIC ArC PrOGreSSION - ABSOlute DePOwer -
POwerDrIve IDS - SPrINt - IMPrOveD le ClOSING SeAM - tuNING
OPtIONS- ultrA BOMB CANOPY reINfOrCeMeNt - flAt SeAMS - New CuStOM
BrIDle PulleYS - New PulleY BrIDle lINe - INDuStrY leADING Qr -
IMPrOveD AIrlOCk vAlve
CrOSSBOw IDSPerfOrMANCe freerIDe
16
13
11
10
9
7
7 5
14
12
10
8
6
4
wAkeStYle / freerIDe
SwItChBlADe IDSCODe NAMe:ClASSIfICAtION
StrutS
feAtureS
SIZe (MeterS)
- PerfOrMANCe freerIDING
- hANG tIMe
- lIGht wIND
- rACING
BeSt fOr: - uNhOOkeD trICkS
- POP trICkS
- kIte lOOPS
- IDS BrIDle - ABSOlute DePOwer - POwerDrIve IDS - SPrINt -
IMPrOveD le ClOSING SeAM - tuNING OPtIONS - ultrA BOMB CANOPY
reINfOrCeMeNt - flAt SeAMS - New CuStOM BrIDle PulleYS- New PulleY
BrIDle lINe- INDuStrY leADING Qr - IMPrOveD AIrlOCk vAlve
KITESINtellIGeNCe: kIte rANGe
4
-
SwItChBlADe IDS CONvert IDS
All-rOuND freerIDe
15
12
9
7
5
3.5
5
- All rOuND freerIDING
- PrOGreSSION
- IDS BrIDle - ABSOlute DePOwer - POwerDrIve IDS- SPrINt -
IMPrOveD le ClOSING SeAM - tuNING OPtIONS - ultrA BOMB CANOPY
reINfOrCeMeNt- flAt SeAMS - New CuStOM BrIDle PulleYS - New PulleY
BrIDle lINe - INDuStrY leADING Qr - IMPrOveD AIrlOCk vAlve
5
-
6
-
7
-
S-QuADSurfING
53 (160CM)57 (170CM)59 (175CM)61 (185CM)
wAkeStYle / freerIDe
CuStOMCODe NAMe:ClASSIfICAtION
feAtureS
SIZe (CM)
- SurfING
- lIGht wIND
- rACING
BeSt fOr: - wAkeStYle rIDING
- huGe POP
- ChOPPY CONDItIONS
133138144
- QuAD fIN DeSIGN
- ePS COre
- COMPOSIte SkIN
- wOOD reINfOrCeMeNtS
- CuStOM Cut trACtION PADS
- Surf StrAPS
- future fIN SYSteM
- wAke-StYle PerfOrMANCe DeSIGN
- QuADCAve tIPS
- wAke BINDING COMPAtIBle
- PAulOwNIA wOOD COre
- SYNC BACkleSS BINDINGS
- 16/18/20 StANCe OPtIONS
- 18/20 wAke BINDING OPtIONS
- PreCISION ShAPeD rAIl
- ABS SIDewAllS
BOARDSINtellIGeNCe: BOArD rANGe
8
-
freeStYle / freerIDe
CuStOM CAlIBer PrODIGY
All-rOuND freerIDe
- freeStYle trICkS
- BIG AIr
- free rIDING
- eArlY PlANING
- PrOGreSSION
PlASMA
lIGhtwIND
- lIGhtwIND
127130133136
138148158
146
- freeStYle PerfOrMANCe DeSIGN
- QuADCAve BOttOM
- flAt CeNter SeCtION
- PAulOwNIA wOOD COre
- 3D X DeCk
- SYNC BACkleSS BINDINGS
- 35/43CM StANCe OPtIONS
- PreCISION ShAPeD rAIl
- ABS SIDewAllS
- freerIDe PerfOrMANCe DeSIGN
- flAt BOttOM
- PAulOwNIA wOOD COre
- SYNC BACkleSS BINDINGS
- PreCISION ShAPeD rAIl
- ABS SIDewAllS
- lIGht wIND PerfOrMANCe DeSIGN
- SINGle CONCAve BOttOM
- OffSet 3D SeCtION
- PvC COre
- SYNC BACkleSS BINDINGS
- 35/43CM StANCe OPtIONS
- ABS SIDewAllS
9
-
10
-
- IDS (INTELLIGENT DEP
OWER SYSTEM)
- POWERDRIVE IDS CONTR
OL SYSTEM
- HOT MELTED LEADING E
DGE CLOSURE
- IMPROVED AIRLOCK VAL
VE
- NEW DURABILITY MEASU
RES
- SIMPLIFIED BRIDLE
IDS
11
-
DEPOWER ON DEMAND
Interactive depower will drop the kite from the sky on
demand.
STAGE 1 - DEPOWER ON DEMAND
IDS IS A SECURITY SYSTEM THAT PROVIDES TWO STAGES OF
DEPOWER.
12
-
Release the residual power when landed. Absolute depower is a
method of self landing your kite.
STAGE 2- ABSOLUTE DEPOWER
13
-
- 5TH LINE FUNCTION WITH ONLY 4 LINES
- DEPOWER ON DEMAND: 1ST STAGE OF DEPOWER
- ABSOLUTE DEPOWER FOR LANDING THE KITE: 2ND STAGE OF
DEPOWER
- IMPROVED, DIRECT STEERING. NO PULLEYS ON CONTROL BAR.
- ENHANCED CONTROL SYSTEM
- INSTANT RELAUNCH
IDS FEATURES
The Intelligent Depower System (IDS) provides an amazing level
of control with minimum rider effort and input. IDS is a simplified
bridle and control system exclusive to Cabrinha. IDS produces
virtually no bar pressure while delivering precise control of the
steering and power of your kite.
IDS is so intuitive that it seamlessly provides 2 stages of
depower. Interactive Depower on Demand while riding, and an
Absolute Depower method to land your kite. Absolute Depower
functions similar to a 5th line system, but without the complexity
of the unnecessary 5th line. Our IDS equipped kites use only 4
lines for a simple, uncluttered method of control and security.
Additionally, the IDS bridle maintains all of the instant relaunch
functionality the Cabrinha kites are famous for.
STAGE 1 - DEPOWER ON DEMAND
DEPOWER ON DEMAND
You can interactively depower on demand by pushing the control
bar toward the kite.
14
-
STAGE 2- ABSOLUTE DEPOWER
To activate absolute depower: Pull the main quick release in the
direction of the kite.
The kite will flag symetrically from the center of the arc,
releasing the residual power.
5TH LINE FUNCTION WITH ONLY 4 LINES 15
-
ADVANTAGES 1. DEPOWER 2. RANGE 3. RELAUNCH 4. EFFICIENCY
REVIEW: BOW KITE VS. NON-BOW KITEINTELLIGENCE: COMPARISON
Its often overwhelming to navigate the many different types of
kites offered today. There are Bow kites, hybrid, SLE, Delta and
classic C shapes. Since most kites today are comprised of slightly
different outlines and a cascading bridle to support the leading
edge its often to tell each of them apart from each other. Here is
a quick overview of what makes a bow kite not only different, but
superior in performance, efficiency and relaunch. Read on and see
why the Cabrinha bow kites are light years ahead of the
competition.
Efficient AirflowThe signature characteristics of a bow kite are
the generous amount of sweep in the wing tips and the prominent
concave in the trailing edge.
These two features work together to provide a kite with a
trailing edge shape that matches the leading edge. This is the most
important feature of any kite when discussing clean airflow over
the canopy.
In the case of a non bow kite without the swept tips and concave
trailing edge, the trailing edge does not match the leading edge
when flying under load. This creates a major disruption in the
airflow over the canopy. The change in shape causes the center of
the kite to lift and the wing tips to be sheeted in which makes the
kite fly slower through the sky especially when flying on the
upstroke.
Whereas a bow kite, with its concave trailing edge, maintains
its trailing edge shape relative the the leading edge arc,
providing a clean and true foil. This feature by itself is
responsible for the incredible efficiency and wide wind range of a
Cabrinha kite.
NON BOW KITE
NON BOW KITEBOW KITE
(Hybrid, SLE, Delta and classic C shapes)
BOW KITE
16
-
Instant RelaunchThe next major benefit comes in terms of
relaunching. The bow kites, with their constant curved leading
edges and swept wing tips form a shape that quickly unsticks and
rolls off the water. The generous sweep in the wing tips helps to
provide reverse lift which quickly raises the kite off of the
water.
As you can see, the bow kites have many features that provide a
higher level of performance, efficiency, and a relaunch second to
none. From beginner to pro, all levels of riding benefit from the
bow kite design. If the kite is anything less than a true bow kite,
you are not getting the full benefit of all this type of kite has
to offer.
NON BOW KITE CANOPY SHAPE DOES NOT MATCH ARC SHAPE. WING TIPS
ARE SHEETED IN
CAUSING SLOWER FLIGHT SPEEDS.
BOW KITE CANOPY SHAPE MATCHES ARC FOR GREATER EFFICIENCY
BOW KITE: SWEPT WING TIPS. CONCAVE TRAILING EDGE
NON-BOW KITE: STRAIGHT TRAILING EDGE
BOW KITE: THE CONSTANT CURVE OF THE LEADING EDGE ALLOWS THE KITE
TO UNSTICK AND ROLL INTO A SIDE LAUNCH POSITION. WING TIPS ARE
NATURALLY RAISED FOR INCREASED LIFT.
THE CONSTANT CURVE OF A BOW KITE LEADING EDGE UNSTICKS AND
RELAUNCHES EASILY.
NON BOW LEADING EDGE HAS MORE CONTACT WITH WATER. THIS COMBINED
WITH LOWER
WING TIPS MAKES A SLOWER RELAUNCH
WATER
17
-
3 STEP INFLATION 1. CONNECT 2. INFLATE 3. ISOLATE
AIRAIR
INFLATE YOUR ENTIRE KITE THROUGH ONE VALVE
Ease of use has reached a whole new level with the addition of
Sprint - our unique single point rapid inflation system. Just pull
the kite out of the bag, hook the pump to a single valve and
inflate the entire kite to the desired pressure.
The supplied leash pump and threaded valve connection keeps your
kite under control even when pumping up directly in the wind.
Once the kite is pumped you can choose to clip off, or isolate
the air contained in the struts. At the end of the session you can
choose to deflate your kite completely by disengaging the strut air
clips. Or you can keep your struts inflated and put your kite away
rolled up so that the next session will take just minutes to set
up.
SPRINT TECHNOLOGYCODE NAME: SPRINTCLASSIFICATION: SINGLE POINT
RAPID INFLATION TECHNOLOGY
SPRINT system made under license of US Patent 7,140,576
INCREASED AIRFLOW(EASIER INFLATION)
CURRENT VALVE NEW VALVE
18
-
CURRENT VALVE NEW VALVE
19
-
this season we take durability head-on with the addition of
transitional strut panel materials and reinforced le closing seams.
we have reinforced the high load areas of our kites with a
transitionally weighted material. this well-placed material acts as
a buffer zone between the rigid strut areas and the canopy. the
entire canopy of all kites are flat seamed and taped prior to
sewing. this is 20% stronger than the free hand sewn method of a
top stitch. the leading edge closing seams now impliments a hot
melt glue tape in the leading edge closing seam for added strength.
the entire trailing edge implements a two-ply of tough 70 gsm
material for added durability and strength.
the full contact between the strut and the leading edge helps to
ensure a rigid frame. the positive connection not only provides
stability while the kite is in flight but delivers added durability
and a rapid relaunch.
Improved bridle lines.we use a corded bridle material for use in
the sections that pass through the pulley.
- hOt Melt le ClOSure
- IMPrOveD leADING eDGe
reINfOrCeMeNt
- trANSItIONAl Strut reINfOrCeMeNt
- flAt SeAM PANel Construction
- 70 GSM trAIlING eDGe MAterIAl
- tOuGheNeD CANOPY MAterIAl
- full CONtACt Strut CONNeCtION
- reINfOrCeD Strut tIPS
- twO-PlY trAIlING eDGe
feAtureS
DURABILITYClASSIfICAtION: CONStruCtION // reINfOrCeMeNt
- the leading edge closing seams now implement a hot melt glue
tape in the leading edge closing seam for added strength.
- A heat reactive tape bonds the leading edge closing seam prior
to sewing.
20
-
full contact between the strut and the leading edge helps to
ensure a rig-id frame.
All kites feature flat seams exclusively
70 gsm material on trailing edge for added durability &
strength.
transitional strut reinforce-ment at high-load areas.
transitional canopy to leading edge reinforcement
wingtip chafe protection
21
-
22
-
23
-
24
-
25
-
CODE NAME: CROSSBOW IDSCLASSIFICATION: Performance FreerideThe
Crossbow IDS launches Cabrinha into an entirely new era of
Performance Freeriding by raising the standard of kite control and
handling yet again. At the heartbeat of this new design is our
innovative Intelligent Depower System (IDS) technology.
The Crossbow IDS delivers in all areas of power and range of use
that you would expect from a Cabrinha Freeride kite. We have
implemented a Dynamic Arc progression which reduces the flatness of
the arc as the kite sizes get smaller. The larger sized kites have
the flattest arcs and highest aspect ratios for light wind
efficiency and a wider wind range. The smaller kites have a more
conservative arc and lower aspect ratios for control and handling
in stronger winds.
This unique design progression makes the Crossbow a chameleon
when it comes to challenging wind conditions. Fast flying, quick
turning and a wide wind range blow the doors wide open for high
performance riding in any type of discipline or conditions.
FEATURES- IDS BRIDLE - ABSOLUTE DEPOWER - POWERDRIVE IDS-
DYNAMIC ARC PROGRESSION- SPRINT - IMPROVED LE CLOSING SEAM- TUNING
OPTIONS - ULTRA BOMB CANOPY REINFORCEMENT - NEW CUSTOM DESIGNED
BRIDLE PULLEYS - NEW PULLEY BRIDLE LINE - InDUSTRy lEADIng QR
- All New Freeride Design- IDS - INTELLIGENT DEPOWER SYSTEM-
Dynamic Arc Progression- Powerdrive IDS Control System- Light Bar
Pressure- New Durability Measures - Improved Airlock airflow
CROSSBOW IDS
SIZE BAR 16m 60cm POWERDRIVE IDS 13m 55cm POWERDRIVE IDS 11m
55cm POWERDRIVE IDS 10m 50cm POWERDRIVE IDS 9m 50cm POWERDRIVE IDS
7m 45cm POWERDRIVE IDS
26
-
811 485 811 354 Silver Gray White BlackFC 16Cream
COLOR 003
811 485 811 354 Silver Gray White BlackFC 16Cream
COLOR 001
811 485 811 354 Silver Gray White BlackFC 16Cream
COLOR 002
811 485 811 354 Silver Gray White BlackFC 16Cream
COLOR 004
811 485 811 354 Silver Gray White BlackFC 16Cream
COLOR 005
15
12
9
7
5
3.5
3.5 6.9 10.4 13.9 17.3 20.8
108 15 >>
>>>KNOTS
MPH
>>
20 2570-80KG(154-176lbs)
30
8.76.9 13 17.4 21.7 26.1
14
12
10
8
6
4
KNOTS
MPH
3.5 6.9 10.4 13.9 17.3 20.8
4 8 12 16 20 24 > >>
>>>
SIZ
ES
IZE
SIZ
E
27
-
28
-
- IDS (INTELLIGENT DEPOWER SYSTEM)
- POWERDRIVE IDS- HOT MELTED LEADING EDGE
- IMPROVED AIRLOCK VALVE
- NEW DURABILITY MEASURES
29
-
30
-
31
-
- Widened usage including Freeride- IDS - Intelligent Depower
System- Absolute Depower- Powerdrive IDS Control System- Light Bar
Pressure- New Durability Measures- Improved Airlock airflow
SWITCHBLADE IDS
The industry leading kite for wakestyle and freeriding just got
better. Thanks to the addition of our Intelligent Depower System or
IDS you have more control at your fingertips than you ever thought
possible.
The Switchblade IDS is a performance kite with a direct, light
bar feel, and easy handling capabilities. The Switchblade excels in
the competition wakestyle arena but is simple enough to make any
rider feel like a pro.
The Switchblade handles the task of unhooked riding by
delivering a constant steady powerband. When unhooked the kite
continues to fly forward, making the power predictable during your
tricks. On the fly depower is extremely linear which means youll
always have the correct amount of power for the job at hand.
FEATURES- IDS BRIDLE - ABSOLUTE DEPOWER - POWERDRIVE IDS -
SPRINT - IMPROVED LE CLOSING SEAM - TUNING OPTIONS - ULTRA BOMB
CANOPY REINFORCEMENT - FLAT SEAMS - NEW CUSTOM DESIGNED BRIDLE
PULLEYS - NEW PULLEY BRIDLE LINE - InDUSTRy lEADIng QR - IMPROVED
AIRLOCK VALVE
CODE NAME: SWITCHBLADE IDSCLASSIFICATION: Wakestyle /
Freeride
SIZE BAR 14M 55cm POWERDRIVE IDS 12M 55cm POWERDRIVE IDS 10M
50cm POWERDRIVE IDS 8M 45cm POWERDRIVE IDS 6M 40cm POWERDRIVE IDS
4M 40cm POWERDRIVE IDS
32
-
14M 55cm POWERDRIVE IDS 12M 55cm POWERDRIVE IDS 10M 50cm
POWERDRIVE IDS 8M 45cm POWERDRIVE IDS 6M 40cm POWERDRIVE IDS 4M
40cm POWERDRIVE IDS
811 485c 811 354 Silver White BlackFC 16Cream
COLOR 003
811 485c 811 354 Silver White BlackFC 16Cream
COLOR 001
811 485c 811 354 Silver White BlackFC 16Cream
COLOR 002
811 485c 811 354 Silver White BlackFC 16Cream
COLOR 006 (BLUE LEADING EDGE)
15
12
9
7
5
3.5
3.5 6.9 10.4 13.9 17.3 20.8
108 15 >>
>>>KNOTS
MPH
>>
20 2570-80KG(154-176lbs)
30
8.76.9 13 17.4 21.7 26.1
14
12
10
8
6
4
KNOTS
MPH
3.5 6.9 10.4 13.9 17.3 20.8
4 8 12 16 20 24 > >>
>>>
SIZ
ES
IZE
SIZ
E
33
-
34
-
35
-
36
-
37
-
FEATURES- IDS BRIDLE - ABSOLUTE DEPOWER - POWERDRIVE IDS -
SPRINT - IMPROVED LE CLOSING SEAM - TUNING OPTIONS - ULTRA BOMB
CANOPY REINFORCEMENT - FLAT SEAMS - NEW CUSTOM DESIGNED BRIDLE
PULLEYS- NEW PULLEY BRIDLE LINE - InDUSTRy lEADIng QR - IMPROVED
AIRLOCK VALVE
- Widened usage including Freeride- IDS - INTELLIGENT DEPOWER
SYSTEM- Absolute Depower- Powerdrive IDS Control System- Light Bar
Pressure- New Durability Measures- Improved Airlock airflow
CONVERT IDS
CODE NAME: CONVERT IDS / CONVERT IDS SECLASSIFICATION: All Round
Performer
If there is one kite which excels at all styles of riding it is
the Convert IDS. The moderate aspect ratio, conservative arc, and
simple IDS bridle add up to a kite that will satisfy first time
riders to pros. The moderate aspect ratio of the Convert is
optimized to fly efficiently, turn quickly, depower immediately and
to relaunch in seconds. The easy handling Convert IDS is designed
to grow with your abilities so that as your kitesurfing progresses,
the kite will back you up with performance to match. The Convert
IDS is the most versatile kite in our range, covering a wide range
of riding styles and conditions.
The Convert IDS SE is identical in design to the Convert IDS
with the exception of canopy material. We use a 70 gsm material
throughout the entire canopy to create a bomb proof construction.
The Convert IDS SE is ideal for schools, surf centers, and anyone
who puts durability and longevity at the top of their feature
list.
SIZE BAR 15M 60cm POWERDRIVE IDS 12M 55cm POWERDRIVE IDS 9M 50cm
POWERDRIVE IDS 7M 45cm POWERDRIVE IDS 5M 40cm POWERDRIVE IDS 3.5M
40cm POWERDRIVE IDS
SIZE BAR
CONVERT IDS SCHOOL EDITION
15M 60cm POWERDRIVE IDS 12M 55cm POWERDRIVE IDS 9M 50cm
POWERDRIVE IDS 7M 45cm POWERDRIVE IDS 5M 40cm POWERDRIVE IDS 3.5M
40cm POWERDRIVE IDS
CONVERT IDS
38
-
CONVERT SCHOOL EDITION
811 485 811 354 Silver White BlackFC 16Cream Gray
COLOR 015
COLOR 016
CONVERT IDS SE - COLOR 009
15M 60cm POWERDRIVE IDS 12M 55cm POWERDRIVE IDS 9M 50cm
POWERDRIVE IDS 7M 45cm POWERDRIVE IDS 5M 40cm POWERDRIVE IDS 3.5M
40cm POWERDRIVE IDS
15
12
9
7
5
3.5
3.5 6.9 10.4 13.9 17.3 20.8
108 15 >>
>>>KNOTS
MPH
>>
20 2570-80KG(154-176lbs)
30
8.76.9 13 17.4 21.7 26.1
14
12
10
8
6
4
KNOTS
MPH
3.5 6.9 10.4 13.9 17.3 20.8
4 8 12 16 20 24 > >>
>>>
SIZ
ES
IZE
SIZ
E
39
-
40
-
- New Streamlined Design. Less clutter- Below the Bar IDS
activation- Soft EVA Bar Ends- Lower Pivot Point- No Pulleys- Left
/ Right designation. (Red and Gray coloring)
CONTROL SYSTEM
41
-
The Powerdrive IDS is equipped to take advantage of our new
Intelligent Depower System features. With Powerdrive IDS you now
have complete control of your kite whether it is flying powered up,
or resting completely depowered on the water or land.
Soft EVA Bar EndsThe Powerdrive IDS is the only bar on the
market with soft EVA multifunction ends. The EVA ends create a
seamless transition from the center of the grip all the way to the
ergonomic, protective ends. This provides added comfort when doing
aggressive turns at the ends of the bar. The ergonomic geometry of
the bar ends also serve as line winders to adequately manage your
line set.
Lower Pivot PointThe soft EVA ends have allowed us to lower the
pivot point of the steering lines right down to the bar. This
reduces the turning impulse required to steer your kite.
FloatationThe EVA bar ends have sufficient buoyancy to float the
control bar and lines, allowing us to eliminate the cumbersome
external floats for an even more streamline, uncluttered look and
feel.
No PulleysThe new Powerdrive IDS control system is completely
void of any pulleys. The IDS equipped kites all work on a direct
1:1 method of control. This produces virtually no bar pressure, and
leaves the bar free of added lines and pulleys.
Proven Quick ReleaseIndustry leading QR. Safety is an integral
part of the Cabrinha design culture. This is why we have used the
same quick release method for three years running. Our quick
release has very little moving parts and is not susceptible to salt
or sand. We do not try to make our QR perform any other function
than to Quickly Release. It is easy to activate with a right or
left hand, whether the kite has power or not. Its simple. Time
tested. Proven.
QR2If at anytime during the Absolute Depower process (after the
main QR has been activated) you need to completely separate
yourself from your kite, you can pull the secondary QR where the
landing line attaches to the harness loop.
CODE NAME: POWERDRIVE IDSCONTROL SYSTEM
42
-
CODE NAME: POWERDRIVE IDSCONTROL SYSTEM
60cm POWERDRIVE IDS 55cm POWERDRIVE IDS 50cm POWERDRIVE IDS 45cm
POWERDRIVE IDS 40cm POWERDRIVE IDS
1) Inline Swivel2) IDS Landing Line3) Centerline Adjustment
Strap (CAS)4) Power Trim Adjusters5) Depower Main Line6) EVA
Floating Bar Ends7) Line Winders8) Quick Release (QRS)9) IDS
Landing Line Connection Point10) Secondary Quick Release (QR2)11)
Harness Loop12) Security Pin13) Bypass Leash Attachment Point14)
Rear (steering) Lines15) Front (center) Lines16) Bypass Leash 17)
Bypass leash Quick Release18) 500kg Centerline
10
1
2
3
4
56
7
89
11
14 15
10
12
13
18
* imag e n o t t o s c a l e
16
FIG. A : Power Trim Adjusters
BLACK(repower)
RED(depower)
17
OVERV IEW
Powerdrive_IDS_UMEnglish.indd 10 15/4/08 12:23:51 PM
SIZE
43
-
44
-
- Sync Backless Bindings
- Wood Cores
- Concave Channel bottoms
- Plasma dedicated Lightwind / Race
board
- Caliber Freestyle / Freeride board
- Expanded Size Ranges
- Expanded binding stance options
BOARDS
45
-
The Sync Backless Binding is an entirely new approach to
creating a positive connection between rider and board. The Sync
connection is so advanced that it transcends the traditional
footstrap category and enters the binding realm. Stopping short of
a full binding, the Sync delivers the type of support youd expect
from a binding with the ease of use of a footstrap.
The Sync is a fully integrated, featherweight binding and
footpad. The Sync binding delivers support over a greater part of
the top and sides of your foot than a traditional footstrap. This
creates the most comfortable and positive kiteboarding connection
available today. The wide Dynema laces not only adjust the size of
the binding, they conform the binding to the shape of your
foot.
Each subtle shift of your weight directly transfers the energy
into the board for immediate response and control. The newly formed
footpad conforms to the shape of your sole to cradle your foot. The
multi derometer EVA provides a cush but supportive platform to
protect from those hard, flat landings.
The Sync Backless Binding attaches to your board in seconds. The
adjustable footplate even allows you to choose your stance angle
between + /- 12 degrees.The easy entry of the Sync opens the door
for a quick entry and exit at any kitesurfing location. The
lightweight, backless binding delivers the type of control and
comfort needed for hitting sliders or throwing down freestyle
tricks for hours on end.
Features- INCREASED SUPPORT FOR THE SIDE AND TOP OF YOUR FOOT-
lACE ADJUSTmEnT TO COnFORm ThE BInDIng TO yOUR FOOT- SOFT NEOPRENE
INTERIOR FOR COMFORTABLE FIT- MULTI DEROMETER EVA FOR A SOFT BUT
SUPPORTIVE FOOTPAD- EASy ATTAChmEnT WITh +/- 12 DEgREES OF AnglE
ADJUSTmEnT
SYNCCODE NAME: SYNCCLASSIFICATION: Backless Bindings
46
-
47
-
DESIGN ELEMENTS
BOTTOM SHAPEDesign specific bottom contours are added based on
the boards performance demands.
QUADSTEP - The Custom receives the very latest in 3-d bottom
shaping with the concave and step bleeding through the perimeter of
the board to increase tracking and create and allow true finless
performance. The Center flat sections reduce the boards tendency to
stick on off axis landings and eliminate spray in the eyes by
allowing the nose to ride higher.
QUADCAVE - The Calibers Quad concave exits the perimeter of the
board to increase tracking and create an overall smooth ride. The
Center flat sections reduce the boards tendency to stick on off
axis landings and eliminate spray in the eyes by allowing the nose
to ride higher.
SINGLE - The single concave with rail chines on the Plasma
improve low end planing and helps to glide through the light
spots.
FlAT - A flat bottom is the most forgiving ride for all
conditions.
CORE PROFILESAll our cores are produced with CNC milling. This
means that every core is true to our design. Flex, profile and
manufacturing consistency are all exact, every time.
ROCKERThe rocker is a key element in the overall feel and
performance of your board. We use four distinct rockers based on
the performance targets of the boards.
FLEX PATTERNA symmetric pattern provides an identical flex,
forward or switch, ideal for all types of riding conditions. The
center sections are stiffer to give excellent edge control.
Controlled flex in the tips give the boards pop and control in all
water conditions.
CONSTRUCTION ELEMENTSCORES
WOOD Vertically laminated Paulownia produces a high compression
lightweight core. Paulownia has one of the highest strength to
weight ratios of all wood species.The result is simple. Bullet
proof, with a smooth, consistent flex pattern. Average Density:
310kg/ m
PVC Super light, tough, low density foam core. The basic
advantage of this material is its light-weight, and ease of milling
a precise core shape; producing a consistent result every time.
Average Density: 75kg/m
EPSEPS cores are watertight and offer high impact resistance.
EPS is combined with a wood laminate and PVC to provide an ultra
light durable core. Average Density 20kg/m
FIBERGLASS LAMINATESEach board has its own unique layup. We have
tested many different configurations of the laminate to produce the
best combination of strength and weight. The Cores are profiled to
dial in the specific flex for a design. Then the laminate is
applied to support the flex and increase strength.
BI-AXIAL A simplified weave ensuring durability with a loose
feel.
TRI-AX A three axis weave of fiberglass that is extremely strong
and light resulting in a very lively feel and response.
ABS RAILSThe ABS sidewall is laminated to the core during the
Lay-Up process. Its designed to increase the strength while
ensuring a smooth, durable and consistent ride. All rails are
finished with our custom shaping to provide precise edge control
and smooth transition.
GRAPHIC FOILA light-weight and tough material. Its UV and
Scratch resistance properties makes it perfect for Kite Board
production.
STAINLESS STEEL INSERTS Our Stainless steel inserts are custom
made to eliminate pull out and spinning. Our inserts are all M-6
thread and sized to properly fit the core profiles. They are
inserted in the core during the lay-up process and are in for
good.
STANCE OPTIONSThe Stance options provided are design specific
based on the rider size and style and are industry standard 15.24cm
patterns to fit the Sync Binding. Stance widths are measured from
the inside mounting screws.
48
-
MULTIPLE STANCE OPTIONS
3-D bottom shaping: Bottom shaping complements the outline and
rocker. Different bottom contours direct the water to give a board
pop, edge control, and directional stability. For the new Cabrinha
collection we have 2 different 3-d contours pushed to the tips and
away from the middle of the board.
QuadStep: On the Custom, 2 outer concaves frame the stepped,
double concave to provide super aggressive bite. Best for wakestyle
and fin-less performance.
QuadCave: The Caliber features 4 concaves which move the water
through the tips of the board to give maximum control at high
speed. This creates high speed positive tracking.
Flat center section: The flat center section smoothes the ride
and assists in off axis and flat landings.
Single Concave: Used in the Custom, Caliber, and Prodigy, a
single concave gives the board early planing and directional
control.
Outline: The outline of the board is a key element in the
overall feel as it influences how a board tracks and turns. The tip
width helps define the amount of pop and board will have and also
determines how early a board will plane.
Rocker: We use 4 rocker groups developed for each boards
specific design goals. The higher rocker of the Custom promotes pop
and control in landings, perfect for wakestyle riding. The Caliber
has a flatter rocker for early planing and speed without a
sacrifice in turning, which are key elements for aggressive
freestyle riding. The Plasmas rocker line is the ultimate in light
wind performance. A flatter center section for ease of use and
early planing is used in the rocker on the Prodigy.
Construction: Paulownina is an eco-friendly, sustainable
resource material used in the Custom, Caliber, and Prodigy. This
super durable core offers enhanced dampening and a bomb proof
laminate.
ABS side wall: ABS adds strength to the boards in both flex and
impact. We use a custom 3-d shape which features a radius lower
edge to promote solid bite in the water. The dual bevel aids in
edge control and water release.
M6 inserts: Industry standard M6 stainless steel inserts.
KEY ELEMENTS
49
-
50
-
SIZE (cm)
- FINS- SURF BOARD BAG- SURF FOOTSTRAPS
- QUAD FIn DESIgn- EPS CORE- COMPOSITE SKIN- CUSTOM CUT TRACTION
PADS- SURF STRAPS- FUTURE FIN SYSTEM- TWO 4 (100mm) FROnT SURF
FInS- TWO 3.25 (83mm) REAR SURF FInS- SURF FOOTSTRAPS
The 2009 S-Quad comes in two new sizes that cover a wider range
of surf styles. The 57 and 61 S-Quad are now closer to a
traditional surf board shape than a tow surfing shape. This makes
the S-Quad perfect for hooked or unhooked surfing in all
conditions. The new wider curvier outlines make for a looser feel
especially in smaller surf. However, when the conditions deliver
pumping surf and strong winds the quad fins really come into their
element. This season weve towed in the fins slightly for carving
rounder bottom turns and tighter cutbacks.
FEATURES
ACCESSORIES
DESCRIPTION
S-QUADCLASSIFICATION: Surf / Freeride
53 x 17.25 (160 x 44Cm) 57 x 18.25 (170 x 46Cm) 59 x 17.50 (175
x 45Cm) 61 x 18.50 (185 x 47Cm)
51
-
52
-
SIZE (cm)
DESCRIPTION
ACCESSORIES - WAKE FINS - 32MM, 38MM, 45MM, 50MM- WAKEBOARD DAY
BAG (CM)- 135 / 140 / 145 / 150 - WAKEBOARD TRAVEL BAG (CM) - 140 /
150- GOLF BAG (CM) - 140 / 165
133 X 40 138 X 42 144 X 43
BOARD COMPONENT PACK - FOUR 45MM FINS- SYNC BACKLESS BINDINGS-
GRAB HANDLE (NOT APPLICABLE FOR CUSTOM)
- WAKE-STYLE PERFORMANCE DESIGN- QUAD COnCAVE ChAnnEl TIPS- FLAT
CENTER SECTION- WAKE BINDING COMPATIBLE- PAULOWNIA WOOD CORE- SYNC
BACKLESS BINDINGS- 40/45CM STANCE OPTIONS- 45/50 (WAKE) STANCE
OPTIONS- PRECISION SHAPED RAIL- NO GRAB HANDLE
The 2009 Custom is our premier Wakestyle twintip board. For the
2009 Custom, weve expanded on the 3D bottom concept we started one
year ago. The quad concave channels have been increased in
definition throughout the tips for a more aggressive bite. The
increase in channel depth allows the board to be ridden finless
when needed. This is perfect for hitting sliders or performing
wakestyle tricks between hits on the obstacles.
Adding to the improved bottom shape is the reduction of the
concaves through the center of the board. This is especially
helpful when landing big tricks slightly off axis. The forgiving
center section gives the rider a stable, less catchy landing
platform while the concave tips provide all of the bite needed.We
have moved to a wood core on the custom for added durability and a
smoother ride.
The Custom comes standard with the new Sync Backless
Binding.
FEATURES
CUSTOMCLASSIFICATION: Wakestyle / Freestyle
53
-
54
-
FEATURES
ACCESSORIES
- QUADCAVE BOTTOm- FLAT CENTER SECTION- PAULOWNIA WOOD CORE- 3D
X DECK- SYNC BACKLESS BINDINGS- 35/43 CM STANCE OPTIONS- PRECISION
SHAPED RAIL
The Caliber is our newest edition to the Cabrinha board line-up.
The Caliber is a Freestyle / Freeride model with excellent speed
and tracking abilities. The Caliber features a wider tipped outline
and has a lower rocker line than the Custom, which makes it quick
to plane and get you through the light spots.
The Caliber takes full advantage of its 3D bottom shape to
deliver a high level of edge control. The Caliber also features a
flat center section for a smoother ride and easy landings. The 3D X
deck provides torsional rigidity to keep the tips from washing out
when edging hard. The Caliber is built with our Wood Core, which
delivers unparalleled strength while staying lightweight. If you
like to ride hard and fast and want the ultimate performance for
Freestyle or Freeriding, the Caliber is the board for you.
The Caliber comes standard with the new Sync Backless
Bindings.
DESCRIPTION
CALIBERCLASSIFICATION: Freestyle / Freeride
SIZE (cm) 127 X 38 130 X 40 133 X 41 136 X 42
BOARD COMPONENT PACK - FOUR 45MM FINS- SYNC BACKLESS BINDINGS-
GRAB HANDLE
- WAKE FINS - 32MM, 38MM, 45MM, 50MM- WAKEBOARD DAY BAG (CM)-
130/135/140/145 - WAKEBOARD TRAVEL BAG(CM)- 140- GOLF BAG -
140CM
55
-
56
-
FEATURES
DESCRIPTION
ACCESSORIES
BOARD COMPONENT PACK - FOUR 45MM WAKE FINS- SYNC BACKLESS
BINDINGS- GRAB HANDLE
- FREERIDE PERFORMANCE DESIGN- FLAT BOTTOM- SYNC BACKLESS
BINDINGS- PAULOWNIA WOOD CORE- ABS SIDEWALLS
Everyone from pros to bros sing the praises of a wood core
board. Wood cores provide a dampening through choppy waters to
deliver a smooth ride. The Prodigy, with its Pauwolina wood core is
an All Round Freeride performer. When it comes to multi styles of
riding the Prodigy is up for the task. The new Prodigy has been
updated with a new wider outline.
The Prodigy comes standard with our new Sync Backless
Bindings.
PRODIGYCLASSIFICATION: Freeride
SIZE (cm) 138 X 41 148 X 43 158 X 44
- WAKE FINS - 32MM, 38MM, 45MM, 50MM- WAKEBOARD DAY BAG (CM) -
140/150/170 - WAKEBOARD TRAVEL BAG (CM)- 140/150/165- GOLF BAG (CM)
- 140 / 165
57
-
- FOUR 45MM WAKE FINS- SYNC BACKLESS BINDING- GRAB HANDLE
- LIGHT WIND PERFORMANCE DESIGN- SINGLE CONCAVE BOTTOM- OFFSET
3D SECTION- PVC CORE- SYNC BACKLESS BINDINGS- OFFSET FOOTSTRAP
POSITION- ABS SIDEWALLS The Plasma is our new, dedicated light
wind board design. The design brief was centered on making a
board that would be ridden in the threshold conditions of 10-12
knots. We not only wanted a board which would plane quickly but
would deliver a high level of performance suited for light wind
riding.
The result is a lightweight twin tip design with a wider,
parallel outline and off center 3-D section and foot positioning.
The PVC core Plasma has excellent tracking abilities and knack for
getting a rider upwind in marginal conditions.The Plasma comes
standard with the new Sync Backless Binding.
FEATURES
DESCRIPTION
BOARD COMPONENT PACK
ACCESSORIES
PLASMACLASSIFICATION: Lightwind
SIZE (cm) 146 X 46
- WAKE FINS - 32MM, 38MM, 45MM, 50MM - GOLF BAG - 165CM
58
-
59
-
FEATURES DESCRIPTIONThe Effect binding brings to snowkiting the
ultimate in performance and ease of use. The direct yet relaxed
feel of the Effect binding delivers the kind of rider to board
connection that is essential for long periods of edging. Its design
is perfect for all mountain and freestyle riding, providing a
forgiving feel during hard landings and all day riding.
The Effect binding is built with the Flow core Technology. The
Flow Technology with its reclining hi-back allows the rider to
easily get in and out of the binding even with kite in hand. This
simple entry and exit of the binding is essential to
snowkiting.
CODE NAME: Effect BindingSNOWKITE
- X-FLEX POWERSTRAP DELIVERS COMFORTABLE RESPONSE AND
SUPPORT.
- NEW LOWER-DUROMETER EVA BASE PAD IMPROVES THE CONNECTION TO
THE BOARD WHILE DAMPENING THE RIGID FEEL ASSOCIATED WITH
TRADITIONAL METAL BINDINGS
- TWO NEW LOCKING MINIRATCHET BUCKLES ON EACH BINDING PROVIDE A
CUSTOMIZED STRAP-FIT TO ANY BOOT
60
-
SIZE
FEATURES
DESCRIPTIONWhether you are into freestyle tricks, big air or
just freeriding, the Empire will expand your possibilities. The
Em-pire snowboard is a true twin tip with a Dual transitional
sidecut, Structurn and Energy Plates. Featuring high strength to
weight ratio wood core, the Empire is designed for a smooth ride in
all condi-tions. The core is profiled to deliver an even response
to long periods of edging which is unique to snowkiting.
The Quadrax orientation of the lay-up dis-tributes binding
pressure over a greater area, because the 30-degree axis fibers add
extra torsional stiffness. The stainless treated steel edges and
Crystal EzCare base all make for a snowkite board with the highest
durability.
Length: 156 cm
Effective edge 119CM
Waist width 25CM
Tip/tail length 19.5/19.5CM
Sidecut radius (cm) 8.6/7.7/
8.6
- PROFLEX CORE- QUADRAx glASS LAMINATE- ENERGY PLATES- DUAL
TRANSITIONAL SIDECUT- MICRO INSERT PATTERN- KITE SPECIFIC TUNING-
CRYSTAL EZ CARE BASE WITH STRUCTURN
CODE NAME: Empire BoardSNOWKITE
61
-
62
-
63
-
64
-
FEATURES- EZ RELEASE SPREADER BAR- THERMOFORM BODY- FULL WRAP
DESIGN- SOFT EDGE FINISH- HANDLE PASS LEASH CONNECTOR- 4-POINT
HARNESS BAR ATTACHMENT- HARNESS BAR PAD- KNIFE
DESCRIPTION
CODE NAME: IMPACT WAIST HARNESSCLASSIFICATION: High-End
Performance
HARNESS
SIZE
XS 46 S 48 M 50 L 52 XL 54
STANDARD
SIZE XS 46 S 48 M 50 L 52 XL 54
EZ RELEASE SPREADER
EZ RELEASE SPREADER
The Cabrinha Impact series of harness has been on the forefront
of comfort and performance since its introduction. This year we
have focused on improving the fit, function, and feel. We utilize
new materials and construction methods with a refined design.
The EZ Release spreader bar allows a quick entry and exit from
your harness without having to re-thread the webbing each time.
The full wrap design locks the harness in place which makes this
the preferred harness for freeride, freestyle and surf. The body of
the impact waist is made with a combination of Thermoform and
neoprene for a durable and comfortable fit.
The 4 point spreader bar connection will keep the hook firmly in
place when you ride, causing immediate kite response from your body
movements. The new harness hook pad ensures your comfort and fits
the new EZ Release spreader bar.
65
-
FEATURES- EZ RELEASE SPREADER BAR- SOFT EDGE FINISH- SMOOTH
NUBOK LEATHER BACKING- HANDLE PASS LEASH CONNECTOR- 4-POINT HARNESS
BAR ATTACHMENT- STANDARD HARNESS BAR
The Cabrinha waist harness is your ticket to a comfortable ride
on any kite. The reduced body size increases mobility and the
simplified waist belt gives a minimalist feel for a comfortable fit
and maximum mobility.
The harness features our 4-point webbing attachment to keep the
hook firmly in place when you ride.
DESCRIPTION
CODE NAME: WAIST HARNESSCLASSIFICATION: Simplicity
HARNESS
SIZE
SIZE
STANDARD
EZ RELEASE SPREADER
XXS44 XS 46 S 48 M 50 L 52 XL 54
XXS44 XS 46 S 48 M 50 L 52 XL 54
66
-
- EZ RELEASE SPREADER BAR- 8-POINT HARNESS BAR ATTACHMENT-
THERMOFORM BODY- 3D SHAPING- KNIFE
The Cabrinha Deluxe Seat Harness is quite possibly the most
comfortable way to go riding. The body shape of the seat harness
keeps the hook right around your center of gravity. This low hook
position is ideal for transferring the load directly to the rail of
your board. The result is a higher level of board control in strong
winds and choppy water.
The 8-Point spreader bar connection will keep the hook firmly in
place when you ride, causing immediate kite response from your body
movements.
DESCRIPTION
- 4-POINT HARNESS BAR ATTACHMENT
The Cabrinha Seat Harness is a comfortable freeride-oriented
harness for all types of riders. The shape of this harness keeps
the hook at hip height, allowing for ideal weight distribution.
This harness provides high levels of board control in a variety of
conditions.
The 4-Point buckle spreader bar connection will keep the hook
firmly in place when you ride, causing immediate kite response from
your body movements.
FEATURES
FEATURES
CODE NAME: DELUXE SEAT HARNESSCLASSIFICATION: Performance
SEAT HARNESS
DESCRIPTION
CODE NAME: SEAT HARNESSCLASSIFICATION: Simplicity
SEAT HARNESS
SIZE
XS 46 S 48
M 50
L 52 XL 54
SIZE
STANDARD
SIZE XS 46 S 48 M 50 L 52 XL 54
EZ RELEASE SPREADER
SIZE EZ RELEASE SPREADER
STANDARD
XS 46 S 48 M 50 L 52 XL 54
XS 46 S 48 M 50 L 52 XL 54 67
-
WAKEBOARD DAY BAGConstructed with a heat reflective interior and
durable exterior, the Cabrinha Day Bag protects your board from sun
sand and salt. This bag is perfect for day travel to the weekend
trips.
DIMENSIONS (CM) 130 135 140 / 140 Plasma Wide Body 145 150
170
WAKEBOARD TRAVEL BAGThe Wakeboard Bag comes fully equipped with
the necessities. This large bag offers padded separation for
several boards and gear to be packed into one bag. Our large Off
Road Wheels add extra durability while external compression straps
keep your gear in place. The internal board separation pad prevents
dings and more parallel rails decrease bag rollover. Offered in
three sizes. (140cm, 150cm, 165cm)
DIMENSIONS (CM) 140 150 165
CLASSIFICATION: Travel Bags/Gear BagsACCESSORIES
SURF TRAVEL BAGThe Surf Travel Bag is similar to the Wakeboard
Bag construction. It is 66 (198 cm) in length and will fit two
surfboards, two kites, bars, harness, and accessories.
DIMENSIONS (CM) 198
08/0
5/13
Cab
rin
ha
2009
KA
9CF
BG
66S
urf
Tra
vel B
ag 6
'6"
Fro
nt
Bac
k
485C
877C
08/0
5/13
Cab
rin
ha
2009
KA
9WB
165
Wak
ebo
ard
Bag
165
Fro
nt
Lef
tR
igh
t
Bac
k
485C
877C
08/05/13Cabrinha 2009KA9WB165
Wakeboard Bag 165
Front
Left Right
Back
485C 877C
08/0
5/13
Cab
rinh
a
2009
KA
9WB
170
Wak
eboa
rd D
ay B
ag 1
70Fr
ont
Bac
k
68
-
CLASSIFICATION: Travel BagsACCESSORIES
GOLF BAGSneaking boards past the airline check in is now stress
free. It is designed like a golf bag that fits all your kite gear
in a single easy to check bag. The golf bag will fit one or two
boards, three kites, and all your essentials in as stealthy a
package as possible. Internal tie down straps will secure all your
gear so TSA wont lose anything if you go through secondary
security. The bag has an external pocket that can hold all your
tools and other last minute forgotten items. The internal clothing
bag can be removed and checked separately if you end up
overweight.
For 2009 we have added a 165 cm length. DIMENSIONS 140cm(L)x
40cm x 20cm 165cm(L)x 65cm x 20cm
08/0
5/13
Cab
rin
ha
2009
KA
9SB
B06
6S
urf
bo
ard
Bag
6'6
"
Fro
nt
Bac
k
485C
877C
Top Profile
Top Profile
SURF BAGThe Surf bag fits one surfboard with fins snuggly in
place. It features a top-zip opening with a reinforced rail guard
around the perimeter to protect your board. Equipped with a
flip-top opening for ease in sliding your board in and out of the
bag. Comes in three sizes (55 60 and 66)
DIMENSIONS 55 (165 cm) 60 (183 cm) 66 (198 cm)
69
-
CABIN TROLLEYThis split roller travel bag features two luggage
compartments, multiple carry handles and external compression
straps. Telescopic handle makes rolling the bag through airports a
breeze. Perfect for weekend getaways, the Cabin Trolley will fit
into overhead luggage compartments on most commercial airlines.
DIMENSIONS (CM) 54 x 33 x 25
TRAVEL GEAR BAGThe split roller travel bag features two luggage
compartments, multiple carry handles and external compression
straps. Telescopic handle allows for easier pulling and pushing
through airport terminals! The triple skid plate bottom
incorporates three inline wheels for the effortless transportation
of your precious cargo.
DIMENSIONS (CM) 81 x 43 x 43
CLASSIFICATION: Gear BagsACCESSORIES
Cabin TrolleyKA9ACT
70
-
CLASSIFICATION: Gear BagsACCESSORIES
TRAVEL PACKMore streamlined than the street pack the new travel
backpack features a 3 pocket front panel, side zippered computer
sleeve, passport pocket. Store your favorite beverage in the side
mesh and run to the gate. The internal pockets feature integrated
storage areas for you pens, pencils, and computer peripherals.
DIMENSIONS (CM) 55 x 30 x 30
STREET PACKThe Street Pack is designed for the traveling
kiteboarder. Internally the pack features an integrated laptop
case, MP3/CD pocket with headphone port, padded sunglass case, and
even a passport/ airline ticket pocket. Externally you will find
the load dispersion back panel, adjustable shoulder straps, a
removable cell phone case, and an integrated carry handle.
DIMENSIONS (CM) 55 x 30 x 30
TOOL BAGThe Cabrinha Tool Bag offers four zippered pouches to
hold your fins, mounting hardware and other kiteboarding
necessities, while two neoprene sleeves keep your screwdrivers in
place.
DIMENSIONS (CM) 30 x 20 x 8
Travel BackpackKA9ANP
71
-
72
-
73
-
Fidel CapViva la revolution! Stylish military/engineer cap with
Flexfit interior band. Embroidered C logo on front of cap.
Available in black only.
Size ONE SIZE
Cabrinha BeanieBlack acrylic beanie with C logo cropped in
front. Perfect for keeping your head warm on cool spring and fall
days. Also gives the coveted gangsta look when worn over eyes.
Black with red embroidery.
Size ONE SIZE
Flexfit Ball Cap Traditional ball cap with Flexfit interior
band. C logo embroi-dered on front of cap, Cabrinha logo on center
back. Available in black only.
Size ONE SIZE
Cabrinha Drink Cooler CoozyNeoprene Dont Drink & Ride -
Drink Holder
Size ONE SIZE
Cabrinha Laptop SleeveProtect your laptop from the elements with
this lightweight sleeve.
Size(CM) 37 (15)
Cabrinha Car Seat Cover- Multi size fitting through stretch
fabric zones.- Black neoprene seat with black Lycra side panels-
Easy installation- Cabrinha logos screened on headrest and
front
Size ONE SIZE
- Materials: black neoprene case
- Velcro fastening flap
- Flap extends 5cm from back of sleeve to fold over and fasten
in front
Cabrinha LanyardBlack & grey lanyard keychain with Cabrinha
embroidered ribbon. Includes detachable key ring with
Cabrinha-embossed carabiner.
Size ONE SIZE
CLASSIFICATION: Soft Goods, HeadwearACCESSORIES
Cabrinha Solar ShowerBlack & silver screened logo. Fill the
pouch with fresh water and leave exposed in the sun and have a warm
shower when you get off the water. Holds around 3 gallons of
water.
Size ONE SIZE
74
-
FRONT
BACK
FRONT BACK
Mens Polymesh Surf ShirtLightweight, loose-fitting t-shirt in
polyester mesh knit, great for sun protection on and off the
water.
Color: White with army green screen printSizes (mens)Short
sleeve: XS/S/M/L/XLLong sleeve : XS/S/M/L/XL
Mens Lycra RashguardClassic rashguard, available in short and
long sleeve style to protect you from harmful UVA rays. Snug
fit.
Color: Black with white screen printSizes (mens)Short sleeve :
XS/S/M/LLong sleeve : S/M/L
CLASSIFICATION: WaterwearACCESSORIES
75
-
76