CABINET INDUSTRIES 400 Railroad Ave. – Danville, PA BUYERS GUIDE Auction Held on November 10 at 10:00 am EST Preview – Tuesday Nov 9 from 9:00am to 4:00pm 10% Buyers Premium Applies (13% Webcast) IRS Home Office : Mailing Address : 365 West Cottage Place PO BOX 5086 Ph: 717-854-0316 York, PA 17403 York, PA 17405 Fax: 717-843-7826 Email: [email protected]www.irsauctions.com
21
Embed
Cabinet Industries Buyers Guide - IRS Auctions · catalog for : cabinet industries ... 211 _____ 1 c r onsrud 3025 ... drill bit grinder-single 1 pallet ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CABINET INDUSTRIES
400 Railroad Ave. – Danville, PA
BUYERS GUIDE
Auction Held on November 10 at 10:00 am EST Preview – Tuesday Nov 9 from 9:00am to 4:00pm
10% Buyers Premium Applies (13% Webcast)
IRS Home Office: Mailing Address: 365 West Cottage Place PO BOX 5086 Ph: 717-854-0316 York, PA 17403 York, PA 17405 Fax: 717-843-7826 Email: [email protected]
www.irsauctions.com
Industrial Recovery Services Page 1 Catalog For : CABINET INDUSTRIES This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Qty Description Lot Qty Description ================================================================================================ 1 _______ 1 HOMAK - TOOL BOX & 27 _______ 1 LOT - AIR DRILLS (3) CABINET 28 _______ 1 LOT - AIR DRILLS (3) 2 _______ 1 HOMAK - TOOL BOX & 29 _______ 1 LOT - AIR DRILLS (3) CABINET 30 _______ 1 LOT - AIR DRILLS (3) 3 _______ 1 SIKD W/PNEU. CYLINDERS, 31 _______ 1 LOT - AIR DRILLS (3) MISC. TOOLS 32 _______ 1 LOT - AIR DRILLS (3) 4 _______ 1 SKID W/VALVES, SANDPAPER, 33 _______ 1 LOT - AIR DRILLS (3) FILTERS, SHOP VAC. 34 _______ 1 LOT - AIR DRILLS (3) 5 _______ 1 REDDY HEATER PRO 155 - 35 _______ 1 LOT - AIR DRILLS (3) PROPANE HEATER 36 _______ 1 LOT - AIR DRILLS (3) 6 _______ 1 REDDY HEATER PRO 155 - 37 _______ 1 LOT - AIR DRILLS (3) PROPANE HEATER 38 _______ 1 LOT - AIR DRILLS (3) 7 _______ 1 UNIVERSAL 150000 BTU - 39 _______ 1 LOT - AIR DRILLS (3) PROPANE HEATER 40 _______ 1 LOT - AIR DRILLS (3) 8 _______ 1 ROLLING WIRE BASKET W/AIR 41 _______ 1 PNEU. HAND HELD BALLOON HOSE & BLOW-OFF GUNS SANDER 9 _______ 1 ROLLING WIRE BASKET W/AIR 42 _______ 1 LOT - (3)PNEU. HAND HOSE SANDERS 10 _______ 1 SKID W/3 PLASTIC BINS OF 43 _______ 1 LOT - (2)PNEU. HAND DISC AIR HOSE SANDERS 11 _______ 1 PALLET W/DISPISABLE 44 _______ 1 LOT - (3)PNEU. HAND RESPIRATORS, EARPLUGS, SANDERS EYEWASH 45 _______ 1 CRAFTSMAN - DADO SET 12 _______ 1 PALLET W/FASTENERS 46 _______ 1 LOT - (3)SPRAY GUNS 13 _______ 1 PALLET W/QUEEN ANN STYLE 47 _______ 1 PNEU. DRILLS & SANDER LEGS 48 _______ 1 EDGEBANDING IRONS & 14 _______ 1 INDUSTRIAL - SHOP VAC ON SOLAIRING PLATES WHEELS 49 _______ 1 LOT - (4)GLUE GUNS 15 _______ 1 DRILL BITS 50 _______ 1 LOT - (3)HOT AIR GUNS 16 _______ 1 NUT DRIVERS, CHISELS, WIRE 51 _______ 1 LOT - (3)HOT AIR GUNS SNIPS & SCRAPERS 52 _______ 1 PORTER - CABLE ROUTER 17 _______ 1 DELTA - LOT - MORTISING 53 _______ 1 BLACK & DECKER - ROUTER ATTACHMENT (2) 54 _______ 1 ELECTRIC & PNEU. PAD 18 _______ 1 NORTHERN - LOT - AIR BLOW SANDERS GUNS- 24" LONG (8) 55 _______ 1 DEWALT - GRINDER, 90§ 19 _______ 1 NORTHERN - LOT - AIR BLOW 56 _______ 1 MILWAUKEE - ELECTRIC GUNS- 24" LONG (7) DRILL 20 _______ 1 CAMPBELL HAUSFELD - AIR 57 _______ 1 BLACK & DECKER - ELECTRIC DRILL- 3/8" DRILL 21 _______ 1 CAMPBELL HAUSFELD - AIR 58 _______ 1 CRAFTSMAN - SABRE SAW DRILL- 3/8" 59 _______ 1 DEWALT - ROUTER 22 _______ 1 CAMPBELL HAUSFELD - AIR 60 _______ 1 MILWAUKEE - DRILL DRILL- 3/8" 61 _______ 1 MILWAUKEE - BAND SAW 23 _______ 1 CAMPBELL HAUSFELD - AIR 62 _______ 1 BOSCH - HAMMER DRILL DRILL- 3/8" 63 _______ 1 MILWAUKEE - SAWZALL 24 _______ 1 CAMPBELL HAUSFELD - AIR 64 _______ 1 SHOVELS, SQUEEGEES, RAKE, DRILL- 3/8" & SPADE 25 _______ 1 LOT - AIR DRILLS (2) 65 _______ 1 SOCKETS, & RATCHETS 26 _______ 1 LOT - AIR DRILLS (3) 66 _______ 1 LOT - (5)TIN SNIPS Visit www.irsauctions.com for additional terms and info.
Industrial Recovery Services Page 2 Catalog For : CABINET INDUSTRIES Lot Qty Description Lot Qty Description ================================================================================================ 67 _______ 1 SET OF 4 WRENCHES, 1 3/8" 101 _______ 1 LOT - HAND TOOLS: HAMMERS, TO 2 1/4" SCREWDRIVERS, WRENCHES, & 68 _______ 1 SET OF 2 WRENCHES, 1 5/8" PLIERS & 2" 102 _______ 1 LOT - STRAPPING TOOLS 69 _______ 1 RIDGID - PIPE WRENCH, #48 103 _______ 1 LOT - (5)CROW BARS 70 _______ 1 RIDGID - LOT - (2)PIPE 104 _______ 1 LOT - GREASE GUNS & OIL WRENCHES #18 CANS 71 _______ 1 LOT - (2)PIPE WRENCHES 105 _______ 1 LOT - (3)STRETCH WRAP 72 _______ 1 YANKEE - LOT - (2)DRILLS DISPENSERS 73 _______ 1 LOT - (4)CHAULK GUNS 106 _______ 1 LOT - GREASE GUNS 74 _______ 1 LOT - (8)CLAW HAMMERS 107 _______ 1 LOT - WRENCHES, & SCRAPERS 75 _______ 1 LOT - (8)CLAW HAMMERS (2 BOXES) 76 _______ 1 LOT - (8)CLAW HAMMERS 108 _______ 1 LOT - WRENCHES-METRIC & 77 _______ 1 LOT - (8)CLAW HAMMERS STANDARD 78 _______ 1 LOT - (8)CLAW HAMMERS 109 _______ 1 LOT - WRENCHES-METRIC & 79 _______ 1 LOT - (8)CLAW HAMMERS STANDARD 80 _______ 1 LOT - (8)CLAW HAMMERS 110 _______ 1 LOT - WRENCHES-METRIC & 81 _______ 1 LOT - (8)CLAW HAMMERS STANDARD 82 _______ 1 LOT - (8)CLAW HAMMERS 111 _______ 1 LOT - WRENCHES-STANDARD 83 _______ 1 LOT - (8)CLAW HAMMERS 112 _______ 1 LOT - WRENCHES-STANDARD 84 _______ 1 LOT - (8)CLAW HAMMERS 113 _______ 1 LOT - ALLEN WRENCHES & 85 _______ 1 LOT - (8)CLAW HAMMERS T-WRENCHES 86 _______ 1 LOT - (8)CLAW HAMMERS 114 _______ 1 LOT - ALLEN WRENCHES & 87 _______ 1 LOT - (8)CLAW HAMMERS T-WRENCHES 88 _______ 1 LOT - (8)CLAW HAMMERS, & 115 _______ 1 LOT - FILES (2 BOXES) (1)PLASTIC MALLET 116 _______ 1 LOT - (2)LEVELS- 18" & 48" 89 _______ 1 LOT - (7)CLAW HAMMERS, & 117 _______ 1 LOT - SCREWDRIVERS- (1)BRASS MALLET PHILLIPS & FLATHEAD (2 90 _______ 1 LOT - (7)CLAW HAMMERS, & BOXES) (1)BALLPEEN, & (1) RUBBER 118 _______ 1 LOT - TAP & DIE SETS MALLET 119 _______ 1 LOT - PIPE THREADING TOOLS 91 _______ 1 LOT - (7)CLAW HAMMERS, & 120 _______ 1 LOT - (4)HAND SAWS (1)PLASTIC MALLET 121 _______ 1 LOT - (4)HAND SAWS 92 _______ 1 LOT - (7)CLAW HAMMERS, & 122 _______ 1 LOT - (4)HACK SAWS, 3 HOLE (1)RUBBER MALLET SAWS, & 1 HAND SAW 93 _______ 1 LOT - (6)CLAW HAMMERS, & 123 _______ 1 LOT - PROTRACTORS & (1)RUBBER MALLET & SQUARES (1)PLASTIC MALLET 124 _______ 1 LOT - T-SQUARES 94 _______ 1 LOT - (8)CLAW HAMMERS 125 _______ 1 LOT - STRAIGHT EDGE 95 _______ 1 LOT - (6)CLAW HAMMERS, SQUARES (1)BALLPEEN HAMMER, & 126 _______ 1 LOT - PROTRACTOR SQUARES (1)PLASTIC MALLET 127 _______ 1 LOT - CUTTING PLIERS 96 _______ 1 LOT - (8)CLAW HAMMERS 128 _______ 1 LOT - CUTTING PLIERS (2 97 _______ 1 LOT - (5)CLAW HAMMERS, BOXES) (1)BRASS MALLET, & 129 _______ 1 LOT - DIGITAL & STANDARD (2)PLASTIC HEAD MALLETS CALIPERS 98 _______ 1 LOT - (8)CLAW HAMMERS 130 _______ 1 FOWLER - TEST SET 99 _______ 1 LOT - BITS, CLAMPS, 131 _______ 1 STARRETT - TEST SET SCREWDRIVERS, PLIERS, & 132 _______ 1 MITUTOYO - CALIPERS (40") ASSORTED TOOLS 133 _______ 1 STARRETT & DIGMATIC - 100 _______ 1 DAYTON - LOT - (2)HAND CALIPERS CARTS 134 _______ 1 I-CHINA - CALIPERS (60") Visit www.irsauctions.com for additional terms and info.
Industrial Recovery Services Page 3 Catalog For : CABINET INDUSTRIES Lot Qty Description Lot Qty Description ================================================================================================ 135 _______ 1 LOT - METAL RULERS 171 _______ 1 LOT - (15)3" C-CLAMPS 136 _______ 1 LOT - METAL WORKTABLES IN 172 _______ 1 LOT - (4)12" BAR CLAMPS AREA, APPROX. 20 173 _______ 1 LOT - (4)7" BAR CLAMPS 137 _______ 1 LOT - SKID W/ARO TOOL 174 _______ 1 LOT - (6)24" QUICK GRIP BALANCERS CORDLESS DRILL, BAR CLAMPS MISC. TOOLS 175 _______ 1 LOT - (4)12" QUICK GRIP 138 _______ 1 LOT - SKID W/PNEU. BAR CLAMPS CYLINDERS & PARTS, GAPHITE 176 _______ 1 LOT - (3)6" QUICK GRIP BAR STICKS & FASTENERS CLAMPS 139 _______ 1 LOT - SKID W/ELECTRICAL 177 _______ 1 LOT - (3)DE-STA-CO, CORDS HOLDDOWN CLAMPS 140 _______ 1 LOT - PALLET OF PIPE & 178 _______ 1 LOT - (1)72" PIPE CLAMP & PNEU. FITTINGS (1) 84" BAR CLAMP 141 _______ 1 LOT - PALLET OF SCREENS 179 _______ 1 LOT - SKID W/BENCH TOP (#6 X 5/8, #6 X 1, #6 X 1 GRINDER, AIR DRILLS, 1/2, #10 X 3/4 & MORE) ELECTRICAL CORDS 142 _______ 1 LOT - SKID W/10 BOXES OF 180 _______ 1 LOT - (4)EASEL STYLE WORK BLACK ADHESIVE CHAULK TABLES 143 _______ 1 LOT - PALLET OF 181 _______ 1 LOT - (4)EASEL STYLE WORK PLASTIC/METAL CASTERS TABLES 144 _______ 1 LOT - PALLET OF SCREWS & 182 _______ 1 LOT - (2)ROLLS OF BUBBLE FASTENERS WRAP (48" WIDE) 145 _______ 1 LOT - PALLET OF SCREWS, 183 _______ 1 LOT - SKID W/MAINTENANCE DRILLS, FASTENERS, SUPPLIES BALOWEERS, & MISC. TOOLS 184 _______ 1 LOT - SKID W/MAINTENANCE 146 _______ 1 LOT - SKID W/(2) EYEWASH SUPPLIES STATIONS, LABELS, & APRONS 185 _______ 1 LOT - SKID W/FEED BELT, 147 _______ 1 LOT - TUB OF SPRING CLAMPS CLIPS & MAINTENANCE 148 _______ 1 LOT - (2)BAR & PIPE CLAMPS SUPPLIES 149 _______ 1 LOT - (3)BAR CLAMPS 186 _______ 1 LOT - SKID W/MAINTENANCE 150 _______ 1 LOT - (3)BAR CLAMPS SUPPLIES 151 _______ 1 LOT - (8)6" & 8" C-CLAMPS 187 _______ 1 LOT - SCALE & CART 152 _______ 1 LOT - (8)6" C-CLAMPS 188 _______ 1 LOT - (2)TV STANDS 153 _______ 1 LOT - (8)6" C-CLAMPS 189 _______ 1 LOT - (8)SOLVENT SAFETY 154 _______ 1 LOT - (8)6" C-CLAMPS CANS & PUMP 155 _______ 1 LOT - (8)6" C-CLAMPS 190 _______ 1 LOT - SKID W/(2) SQUARE D 156 _______ 1 LOT - (7)10" & 11" STARTERS, DEWALT DRILL, C-CLAMPS STRETCH WRAP DISPENSER 157 _______ 1 LOT - (12)5" & 4" C-CLAMPS 191 _______ 1 LOT - SKID W/CLAMPS, 158 _______ 1 LOT - (8)8" C-CLAMPS TOOLS, ELECTRIC HEATER, & 159 _______ 1 LOT - (8)8" C-CLAMPS WORK VESTS 160 _______ 1 LOT - (8)6" & 10" C-CLAMPS 192 _______ 1 SIGNODE - LOT - BANDING 161 _______ 1 LOT - (4)12" C-CLAMPS CART & PNEU. TENSIONER 162 _______ 1 LOT - (4)10" C-CLAMPS 193 _______ 1 SIGNODE - BANDING CART 163 _______ 1 LOT - (12)6" C-CLAMPS 194 _______ 1 LOT - (2)BARREL CARTS 164 _______ 1 LOT - (4)10" C-CLAMPS 195 _______ 1 LOT - (2)30" SAFETY 165 _______ 1 LOT - (8)8" C-CLAMPS LADDERS 166 _______ 1 LOT - (8)8" C-CLAMPS 196 _______ 1 LOT - SKID W/AIRHOSE, 167 _______ 1 LOT - (8)8" C-CLAMPS HEATER, & PACKING PLASTIC 168 _______ 1 LOT - (8)8" C-CLAMPS 197 _______ 1 LOT - (2)30" SAFETY 169 _______ 1 LOT - (5)6" & 8" C-CLAMPS LADDERS 170 _______ 1 LOT - (2)8" DEEP THROAT 198 _______ 1 LOT - (4)18" SAFETY C-CLAMPS LADDERS Visit www.irsauctions.com for additional terms and info.
Industrial Recovery Services Page 15 Catalog For : CABINET INDUSTRIES Lot Qty Description Lot Qty Description ================================================================================================ 620 _______ 1 DORSEY FPDT-84 - TRAILER PUMP 48'-VIN-1DTV14X26FA168124 651 _______ 1 *SPRAY BOOTH (6'W X 5 621 _______ 1 PALLET RACKING W/10' & 12' 1/2'D X 8'H) 1 EXPLOSION CROSSBEAMS PROOF LIGHT, APPROX. 1HP. 622 _______ 13 WORKTABLES-METAL 3 PHASE EXHAUST MOTOR 623 _______ 22 WORKTABLES-METAL 652 _______ 1 *SKATE WHEEL CONVEYOR 624 _______ 11 WORKTABLES-METAL (250'L X 22"W) 625 _______ 12 WORKTABLES-METAL 653 _______ 1 *SPRAY BOOTH (8'W X 8'H 626 _______ 12 WORKTABLES-METAL WITH SLANTED SIDES) (1) 627 _______ 15 WORKTABLES-METAL EXPLOSION PROOF LIGHT, 628 _______ 15 WORKTABLES-METAL APPROX. 1HP, 3 PHASE 629 _______ 1 DOCK DESKS, CARTS, EXHAUST MOTOR CONVEYOR, SAFETY CAGE 654 _______ 1 *DRYING TUNNEL (12'L X 8'W 630 _______ 1 EGA - SAFETY PLATFORM X 8'H) INCLUDES (2)OGDEN 631 _______ 1 LOT - (8)KNOCKDOWN WIRE ARL HTS IL LIGHTS, ALSO BASKETS & (4) CASTER BASES INCLUDES AN AMERICAN 632 _______ 1 LOT - (2)BARREL RACKS & SCISSOR LIFT 5' X 2' (1)ROLL STAND PLATFORM 633 _______ 1 LOT - (2)ALUMINUM TUBS 655 _______ 1 *SPRAY BOOTH (8'W X 8'H) 634 _______ 1 LOT - PALLET RACK- 8' (3) EXPLOSION PROOF LIGHTS CROSSBEAMS 656 _______ 1 *SPRAY BOOTH (8'W X 8'H) 635 _______ 1 LOT - APPROX. THRU-FEED DESIGN W/3 1/2'W (25)KNOCKDOWN WIRE BASKETS X 8'H SIDEWALLS, 636 _______ 1 LOT - (6)TUB SKIDS (1)EXPLOSION PROOF LIGHT, 637 _______ 1 LOT - (4)4-WAY METAL SKIDS APPROX. 1HP, 3 PHASE 638 _______ 1 LOT - APPROX. EXHAUST MOTOR, INCLUDES (10)KNOCKDOWN WIRE BASKETS ARO PUMP & DEVILBISS GUN 639 _______ 1 LOT - CONVEYOR & WORKTABLE 657 _______ 1 RED DEVIL CAT#5033 - LEGS 040583Q - PAINT SHAKER, 640 _______ 1 LOT - GRAVITY ROLLER & 1/2HP, SINGLE PHASE SKATE CONVEYOR 658 _______ 1 LOT - (4)BARREL STANDS 641 _______ 1 LOT - APPROX. 659 _______ 1 LOT - (4) AUTUMAIRE FANS (14)KNOCKDOWN WIRE BASKETS 660 _______ 1 RED DEVIL - PAINT SHAKER 642 _______ 1 LOT - (3)TUB SKIDS & 661 _______ 1 LOT - (20)BARREL OF (2)SIDE SLOT TUBS ADHESIVE, FOOD PACKAGING 643 _______ 1 LOT - (10)KNOCKDOWN WIRE ADHESIVE, ASSEMBLY TX BASKETS & (12)CASTER BASES BROWN INCLUDES (2)GRACO 644 _______ 1 LOT - (4)PALLETS OF PUMPS WORKTABLES 662 _______ 1 LOT - (4)PNEU. 645 _______ 1 *BULK BID - FINISHING STIRRERS/PADDLES LINE: CONSISTS OF LOTS 663 _______ 1 LOT - PRESSURE POTS, GUNS 646-656, EXCLUDING LOT 648 & ARO PUMP 646 _______ 1 *ROLLER CONVEYOR, 664 _______ 1 LOT - (5)PNEU. (240'LONG X 21 1/2" WIDE) STIRRERS/PADDLES 647 _______ 1 *SPRAY BOOTH (20' X 8' X 665 _______ 1 KREMLIN - PUMP & GUN 8'), (4)EXPLOSION PROOF 666 _______ 1 LOT - PRESSURE POT, GUN & LIGHTS, THRU-FEED, APPROX. DEVILBISS FITTER & GANGER 3HP, 3 PHASE EXHAUST FAN 667 _______ 1 LOT - KREMLIN PUMP & GUN & 649 _______ 1 *DRYING TUNNEL (29'L X 8'W (2) NORDSON PUMPS X 8'H) 668 _______ 1 LOT - (2)ARO PNEU. PUMPS 650 _______ 1 *SPRAY BOOTH (8'W X 5'D X 669 _______ 1 LOT - SOLVENT CANS 8'H) 1 EXPLOSION PROOF 670 _______ 1 LOT - NORDSON PUMPS, LIGHT, APPROX 1HP, 3 PHASE PRESSURE POT, PUMP & PAINT EXHAUST MOTOR, NORDSON SHAKER Visit www.irsauctions.com for additional terms and info.
Industrial Recovery Services Page 16 Catalog For : CABINET INDUSTRIES Lot Qty Description Lot Qty Description ================================================================================================ 671 _______ 1 LOT - (6)PEDESTAL FANS 672 _______ 1 LOT - CARTS, BARREL CASTER & STOOLS 673 _______ 1 LOT - (3)PRESSURE POTS & (2)GVS 674 _______ 1 KREMLIN - PUMP & GUN 675 _______ 1 LOT - (2)PRESSURE POTS & GUNS 676 _______ 1 LOT - (4)PRESSURE POTS 677 _______ 1 LOT - PUMP PARTS, PNEU. FITTING 678 _______ 1 LOT - (4)PRESSURE POTS Visit www.irsauctions.com for additional terms and info.
Customary Terms of Sale All persons attending or participating in an on premises auction or sale acknowledge and agree that their attendance and/or participation constitutes their agreement to be legally bound by all of the terms set forth below (the "Customary Terms of Sale"). 1. IDENTIFICATION: All participants are required to register by giving their full name and address and showing proper identification, acceptable to IRS, upon which they will receive a bidders paddle, if applicable. 2. DEPOSIT: Each bidder agrees to maintain a deposit equal to 25% of the knock down floor price of an item such bidder is bidding on throughout the sale. Deposits made in connection with auctions may be made in advance of the auction and the balance thereof for unsuccessful bidders will be refunded promptly after the auction is completed. Upon non-payment or other default by a bidder, the auctioneer or IRS, as the case may be, in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise as liquidated damages.
3. PAYMENT: (a) The following payment terms apply to on premises auctions and sales:
(i) Invoices must be paid in full by conclusion of sale day unless otherwise specified. (ii) Business and personal checks will not be accepted without a letter of guarantee from a purchaser's bank
acceptable to IRS in substantially the form set forth below:
MR. "CUSTOMER NAME" IS A CUSTOMER OF THIS BANK. THIS BANK GUARANTEES UNQUALIFIED PAYMENT TO INDUSTRIAL RECOVERY SERVICES ON THE ACCOUNT LISTED HEREIN UP TO THE AMOUNT OF $_________. THIS LETTER IS VALID UNTIL (DATE).
Such letter of guarantee must be good for at least 10 days beyond the auction or sale date.
(iii) A buyers premium, to be determined by IRS and announced, will be applied to invoice(s) in addition to the purchase price.
(iv) Sales tax where applicable applies to all sales unless the buyer has, in the sole determination of IRS, proper exemption.
(v) No item will be released until IRS has received payment in full for it. No Exceptions. (vi) All checks for deposit and balances due shall be payable to the order of "Industrial Recovery Services." (vii) All invoices or other amounts due shall be paid to IRS or the auctioneer as announced. (viii) The full purchase price on all items sold to the same buyer must be paid within the time announced and before removal
and/or shipment of any items. (ix) Unless otherwise consented to by IRS or if in conformity with (ii) above, all payments shall be in the form of cash or a
certified or cashier's check payable to IRS. (b) For certain sales, including liquidations, IRS may, at its sole discretion, require bank wire payment(s).
4. MANNER OF OFFERING: The auctioneer or IRS, as the case may be, reserves the right to group lots, make lots smaller, add to, delete from, sell similar consecutive lots in groupings and to remove from auction or sale any of the items listed. The auctioneer or IRS, as the case may be, also reserves the right not to accept or acknowledge any bid which is merely a fractional advance over the preceding bid. 5. SALES: All items in an auction will be offered to the highest bidder for cash in accordance with these Customary Terms of Sale. IRS may also offer and sell items without use of an auction upon these Customary Terms of Sale. However, notwithstanding anything herein to the contrary the Customary Terms of Sale are subject to change without notice at any time, including on the day of auction or sale or during an auction, by IRS or the auctioneer, conducting an auction. It is the responsibility of bidders, other participants and attendees to regularly review these Customary Terms of Sale for changes or modifications. IRS shall select a third party or an employee of IRS to conduct on premises auctions and sales. All items will be offered to the highest bidder in accordance with the bid process as established and modified from time to time by IRS. The auctioneer and IRS reserves the right to sell on behalf of third parties or its own account. IRS reserves the right to revoke any bidder's privileges for any reason. IRS reserves the right to extend and/or change the on premises sale date with respect to on premises auctions. All items will be offered subject to prior sale. Should any dispute arise between two or more bidders or parties, or as to any bid, the lot or item in question may, at the discretion of the auctioneer or IRS, be immediately put up again and resold. The auctioneer or IRS, as the case may be, shall regulate all matters relating to the conduct of the auction or sale and the auctioneer's or IRS' decision, as the case may be, shall be final and binding on all bidders or parties. For on-line auctions IRS shall regulate all matters relating to the conduct of the auction or sale and the decision of IRS shall be final and binding on all bidders. The auctioneer or IRS, as the case may be, reserves the right to refuse any unregistered bidder or party the privilege of bidding or participating in an auction or sale and may revoke such privilege at any time. With respect to registered bidders or parties, if the auctioneer or IRS, as the case may be, determines in his or its discretion that a bidder or party is disrupting or interfering with an auction or sale or is not present at an auction or sale for a legitimate business reason, the auctioneer and IRS reserves the right to refuse such bidder or party the privilege of bidding and participating in the auction or sale and may require the bidder or party to leave the premises at which the auction or sale is taking place. All sales are final, on a "as is, where is", "in place", "with all faults" basis with no conditions or warranties whether expressed, implied, statutory or otherwise, including without limitation, warranties or conditions as to title, description, fitness for purpose, quantity, quality, merchantability, state, condition, location or otherwise. No sale shall be invalidated and the auctioneer and IRS, its affiliates, stockholders, directors, officers, employees or agents shall have no liability for mis-description of any article or lot whether contained in a catalog, advertisement or otherwise. Descriptions of items have been prepared for guide purposes only and shall not be relied upon by the bidder or buyer for accuracy or completeness. Please take advantage of the inspection period. if any, for an item. Each bidder and buyer shall be deemed to have relied entirely upon his or her own inspections, inquiries and/or investigations, if any. Each bidder and buyer acknowledges and agrees that each has had adequate opportunity to inspect, inquire and/or investigate all the items upon which such bidder or buyer is bidding or attempting to buy. Each of IRS, the auctioneer and the seller of an item, as the case may be, assume no liability for errors, omissions and/or the accuracy of an item's description and/or listing.
6. CONTRACT MOVERS: If the buyer wishes to hire or contract with a machinery mover, rigger or other type of outside contractor, IRS WILL NOT ALLOW them to work on any premises unless they have placed with IRS or the auctioneer a satisfactory certificate of insurance, as determined by IRS in its sole discretion, protecting IRS, the auctioneer and seller(s) against any or all claims arising from personal injury and/or property damage created by their actions. This requirement is for such party's protection and not for the buyer's and therefore IRS and the auctioneer suggest that prospective bidders and buyers review the insurance policies of mover(s) regarding the coverage that they have protecting buyers and damage or loss of the items they may be moving for the buyer. IRS shall not, in any way, be responsible or liable for the actions or omissions or any mover or any similar third party retained or engaged by a buyer to move or deliver purchased item(s) and each buyer hereby releases IRS and its directors, officers, employees and agents from any and all such responsibility and/or liability and waives any claim against such parties in connection therewith.
7. ADJUSTMENTS: Errors in estimates of item inventory will be adjusted, but no adjustment will be made after the items have been removed from their place of sale, handled by the buyer or after the removal dates as listed on the sale invoice and announced by IRS or the auctioneer, as the case may be, at the start of the sale, whether or not the item has been removed. All adjustments must be authenticated and approved by IRS. In no cases will any adjustments be made after the item(s) has been removed from the auction or sale premises or sent for delivery to a buyer.
8. RESPONSIBILITY FOR NON-DELIVERY: Each of IRS, the auctioneer or the seller of an item shall not, in any event, be liable for non-delivery or for any other delivery matter, to any buyer of any item, other than for the return to the buyer of the deposit or sum paid for or in connection with such item, if any, that the buyer may be due. 9. LIABILITY AND INDEMNIFICATION: The risk of loss of any item passes to the buyer at the time the item is sold. The buyer will thereafter assume the risk of any damage, theft or any other loss with respect to the item. Buyers, bidders, participants and attendees acknowledge and understand that they are using the services provided by or through IRS at their own risk. Persons involved with or attending an auction or sale, whether as a bidder or otherwise, or removal of items assume all risks of damage of or loss to person and property and specifically release and indemnify IRS and the auctioneer from liability therefore. IRS, the auctioneer and the seller of an item shall not be liable by reason of any defect in or condition of the premises in which the auction or sale is held. Buyers shall defend and indemnify and hold IRS, the auctioneer and the seller of items(s) harmless from and against all claims and liabilities relating to the condition of, removal of, or use of the items purchased or failure of the buyer or a third party to follow instructions, warnings or recommendations of the manufacturer of an item, or to comply with federal, state and local laws applicable to such articles, including OSHA requirements, and Environmental Protection Agency requirements, or for proximate or consequential damages, costs or legal expenses arising therefrom. Further, the buyer assumes and agrees to indemnify, defend and hold harmless IRS, the auctioneer and the seller of an item for any future claim(s) pertaining to the fitness, merchantability, suitability for a particular purpose, or use of an item as purchased. Also, the buyer expressly waives any claim in respect to any possible future use of an item purchased for any purpose(s).
10. SAFETY DEVICES: IRS and the auctioneer makes no representation or warranty whatsoever that the items sold comply with OSHA standards, ANSI safety requirements, or any other industry or applicable safety standards. It is the buyer's responsibility that items purchased be equipped and safeguarded to meet any applicable safety standards before placing such items into operation. The buyer assumes all responsibility and shall indemnify IRS and the auctioneer against any claims, actions or liabilities arising out of or relating to any failure of the items sold hereunder to comply with such standards. 11. RECORDS: The record of sale(s) kept by the auctioneer and/or the IRS bookkeeper will be taken as final in the event of any dispute. All auctions are tape recorded for verification purposes.
12. INDEPENDENT CONTRACTOR: IRS and the auctioneer, as the case may be, is acting as an independent contractor only and is not responsible for the acts of its principals or sellers.
13. REMOVAL: No item can be removed during the auction or sale without the auctioneer's or IRS' approval. No item shall be removed unless paid for in full and all items purchased shall be removed as announced. The buyer shall be responsible for all costs of removal and shall be liable for any damages, including without limitation, any environmental laws and regulations and all requirements established by IRS or the auctioneer for the removal of items including requirements as to the bonding and insuring of movers. Upon failure of a buyer to remove items within the time announced, IRS and the auctioneer shall have the option of removing and storing the items at the expense and risk of the buyer and not refunding any deposits in which case IRS and the auctioneer may resell without notice at public sale or otherwise dispose of the items at risk and expense of the buyer. The buyer shall remain liable for loss, expense and damages arising from the buyers non-payment or other default. 14. RESERVE: IRS or the auctioneer, as the case may be, reserves the right to reject any and all bids or offers. On items upon which there is a reserve, IRS, consignors, the auctioneer, and/or any affiliated person or company, and/or their agents reserve the right to bid on behalf of the seller. IRS, consignors, the auctioneers or any affiliated person or company reserves, and/or their agents, reserves the right to consign items to an auction or sale and to participate as a bidder or buyer. IRS, the auctioneer, consignors, employees, assignees and/or their agents may bid for their own account at any auction or sale and may have information not otherwise available to the public regarding reserves, values or other material facts relating to the items which are the subject of the auction or sale. When an item i5 sold to the book, it may be sold, passed, withdrawn, returned to the seller or bought or brought in. 15. MISCELLANEOUS. These Customary Terms of Sale and any disputes relating thereto or any dispute among IRS, an auctioneer, a buyer, a bidder. User, or an attendee at an auction or sale shall be governed by the laws of the Commonwealth of Pennsylvania without giving any effect to any principles of conflicts of law. A buyer, bidder, participant or an attendee at an auction or sale hereby (i) consents to the exclusive jurisdiction
and venue of the United States District Court for the Eastern District of Pennsylvania, or in the even that court lacks jurisdiction to hear a claim, in the Court of Common Please for Philadelphia County and (ii) agrees that it will not institute legal actions against IRS or an auctioneer in any other court or administrative body, without the express written permission of IRS and that if this provision is violated by such party, then such party shall be liable for all legal fees and expenses incurred by IRS in removing the case to another court or administrative body. If any part of these Customary Terms of Sale is determined to be invalid or unenforceable pursuant to applicable law including, but not limited to, the warranty disclaimer and liability provisions, set forth herein, then the invalid and unenforceable provisions will be deemed superseded by a valid, enforceable provision that most closely matches the intent of the original provision and the remained of the Customary Terms of Sale shall continue in effect. With respect to on premises auctions or sales, all bidders, buyers, attendees and other third parties participating or viewing an auction or entering an auction site hereby consent to the taking and use by IRS of photographs and audio and/or video recordings for use by IRS as it sees fit without the necessity of any release, consent, payment or any other compensation.
THANK YOU FOR ATTENDING OUR AUCTION!
WE LOOK FORWARD TO SEEING YOU AT THE NEXT INDUSTRIAL RECOVERY SERVICES SALE.
“The Woodworking Auction Specialists”TM
Industrial Recovery Services specializes in the sale of woodworking assets and has conducted sales world-
wide. We sell thousands of woodworking machines through our online auctions and conduct live onsite sales
giving each sale individualized attention. We have conducted sales for companies as large as La-Z-boy,Pennsylvania House, Kincaid Furniture, Lea Industries, American Of Martinsville, American Drew,Thomasville Furniture Industries, Ethan Allen, Keller Furniture, Harden Furniture, Merillat Industries,Jeld-Wen, Inc., Leedo Furniture, Vaughan Furniture, Jasper Cabinets, Jasper Wood Products, SanyoCorporation, Steelcase, Broyhill Furniture Industries and the list goes on and on. Industrial Recovery
Services has sold millions and millions of dollars worth of woodworking equipment since its inception and, the
woodworking industry has labeled us, “The Woodworking Auction Specialists”.
Industrial Recovery Services pioneered the online auction of industrial woodworking assets and has a
captive audience of thousands of buyers watching our web site daily. Industrial Recovery Services has con-
ducted thousands of successful online auction sales with massive database of woodworking machinery buy-
ers throughout the world. The scope of our woodworking machinery buyers is worldwide. Please visit our site
at www.irsAuctions.com
If you have one piece for sale or an entire woodworking facility,call IRS Auctions at 717.854.0316