C2/C2C Fingerprint&Card Time Clock Operation Guide Terminal atuomaticly power on when electricfied, Input Administrator ID and Password to enter the management menu. Menu List: RJ11 RJ45 TCP/IP USB/Power Place finger in the center of the sensor. Place finger flatly and smoothly on the sensor. Finger not placed on the center of the sensor Use fingertip Finger placed inclined 6. Function Key 7. Menu/Back Key 8. Confirm Key V1.1 Correct method : Incorrect method : Enter management menu: Input ID“0”and press[OK], Input default management password ‘12345’ and press[OK] enter management menu. Press [OK] Press [OK] 08-07-2011 09:46:15PM Press M to Access Menu MON PM IN 46 09 Enter ID Menu/Exit ID＃ 0 08-07-2011 09:46:30PM Enter Password Menu/Exit ID＃ 0 08-07-2011 09:47:15PM Password ***** 菜单管理-用户管理 Main Menu - Manage User Select Menu Search Record Clock Setup Clock Information Comm.Setup Manage User Pen Drive M=Return OK=Enter 08-07-2011 09:47:40PM Set Communication parameter: Input administrator password Input administrator ID Select [Comm.Setup] Set communication parameter, Press[M] to exit and save Real Time Comm. IP Address Server IP Mask Gateway Disable TCP/IP Client 192.168.000.218 192.168.000.007 251.155.255.000 192.168.000.001 菜单管理-用户管理 Main Menu - Manage User Search Record Clock Setup Clock Information Comm.Setup Manage User Pen Drive Menu/Exit Admin Verify ID＃ 0 08-07-2011 09:47:15PM Password ***** Menu/Exit Admin Verify ID＃ 0 08-07-2011 09:46:30PM M=Return OK=Enter 08-07-2011 09:47:40PM M=Save and Exit 08-07-2011 09:47:40PM Time Clock Communication Setup Press [OK] Press [OK] Press [OK] 1 7 9 8 2 3 4 6 5 Swipe Card Area 1. LCD 2. 0-9 Num.Key 3. Status Key /directiion key 5. Speaker 4. LED 1 2 3 Swipe Card Area 9 8 7 5 4 6 Fingerprint Sensor 9. Delete Key Operation Guide Product Appearance Product Appearance Product Appearance Menu 9.Delete Key 其他设置 OtherSetup Wiring Diagram Time Setup Time/Date DST Setup Item Explanation Set the time and date of the terminal Enable/Disable daylight Saving Time. Select DST define mode: Week/Date. Default In/Out Attendance Setup Re-Verify Interval （0-250） Log Capacity Warm (0-5000) Auto In/Out Status Switch Item Explanation Set a period during which time the system only save the first successful record and do not save the repeated records.[0]: Disable the function; Max. value is 250 min. The terminal will alarm when the memory capacity is less than the [Log Alert] value. [0]-Not alarm. Max. value 5,000. Automaticly switch the attendance status following the shift rule of the user. 0 1000 Clock Options Default Volume Password Reset to factory settings Device ID Item Explanation Set the terminal voice volume. 0-[mute], 5-[Max]: 0-5 The password to enter management mode The system will back to factory mode. It will delete all the data. Device ID of the terminal which is required in software communication 12345 5 1 Comm.Setup Default ServerMode Disable Set the IP address of terminal when communicat with TCP/IP. IP address must be idle fixed IP address. Subnet Mask of the LAN Collect the attendance reocrd in real time from terminal in realtime, When you use Real-time monitoring function of the software you need to enable it. TCP/IP Server mode: Common networkmode TCP/IP Client mode: Only communicate with the PC which has server IP Default Gateway of the LAN It is the IP address of managing PC when set TCP/IP communication. The address must be set in ‘Client mode’ 192.168.000.218 255.255.255.000 192.168.000.001 192.168.000.007 Comm. IP Address Mask Gateway Server IP Item Explanation Real Time To Pen Drive Setup All Records New Records Some Users All Users Item Explanation Download all the attendance records and create an Anviz-c folder in the root path of the U pen driver. The attendacne record file named ：KQ. Download the new attendacne records and create an Anviz-c folder in the root path of the U pen driver. And the new attendance record file named:NKQ. Download designated users information. Download all the user information and fingerprints. There are two files store in the Anviz-c folder. User information file named: YG, User fingerprint file named: ZW. Comm.Setup Manager User Add User Modify User Delete User Pen Driver To Pen Driver Upload to Clock Clock Setup Time Setup Display Setup Advanced Setup Other Options Clock Information Search Record Attendance Self Test FP Precision In/Out Att. Setup Clock Options Power Manage Access Control (The function with mark in the menu is for the specific model unit. Please follow as actual product’s menu. ) Add user information ( Select 【Manage User】and press [OK] ) Add User：Each user can register 10 fingerprints, one password and one card. It requires place the finger twice to register one fngerprint. Select [Enroll FP] Press [OK] Select finger to enroll, after enrollment, press[M] to save and exit Select [MatchWay] Press [OK] User ID 8108 Place Your Finger 0 1 2 3 4 5 6 7 8 9 Enter User information Setup PW Card # Save/Next Admin No Name Enroll FP MatchWay User ID 8108 Select [Add User] Modify User Delete User Add User Set Verify method, Then press [M] to exit Default Method FP + PW + Card ID + Password FP + PW Fingerprint Only ID + FP ID + PW + FP Card Only Card + FP Card + PW 08-07-2011 09:48:15PM M=Return OK=Enter 08-07-2011 09:48:15PM M=Exit 08-07-2011 09:48:15PM M=Save and Exit 08-07-2011 09:48:15PM M=Save and Exit Main Menu - Add User Enroll New User Enroll FP Default Verification Method Press [OK] Setup Illustration for placing finger FP Precision Setup 1 : N 1 : 1 AutoUpdate VerifyMode All User Verify Item 80% 90% YES Default Explanation The fingerprint to be verified will be matched with all the fingerprint templates in the database automatically. The fingerprint to be verified will be matched with the fingerprint template of the specific user ID. In the process of verifying fingerprint, the system will replace the old low quality fingerprint template with the new high quality fingerprint template. set default verify methods for terminal. Set verify methods for all users. Now all the users will be set same verifying method. Display Setup Language Date Format FP Image Time Format Item Explanation The Language of the menu Setup the Date format on the LCD Whether display fingerprint image when place finger. Setup the Time format on the LCD Default please refer to the subject product YYYY-MM-DD 24 Hour Show Access control Default Relay control Wiegand Mode Lock Delay Wiegand Area Code Item Explanation Select relay work mode: ‘Open Door’ or ‘Ring Bell’ Wiegand26, Anviz Wiegand and Fixed Wiegand Time range for the door open delay. If you upload one fingerprint to two terminals, the same fingerprint’s wiegand outputs are different in the different terminals. If the two terminals’ wiegand area codes are same, the same fingerprint’s wiegand outputs are same in these two terminals.(0-254) Open Door Wiegand 26 10 5 （0-15Sec）
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
C2/C2C Fingerprint&Card Time Clock Operation Guide
Terminal atuomaticly power on when electricfied, Input Administrator ID and Password to enter the management menu. Menu List:
RJ11 RJ45
TCP/IP
USB/PowerPlace finger in the center of the sensor. Place finger flatly and smoothly
on the sensor.Finger not placed on thecenter of the sensor
Use fingertipFinger placed inclined
6. Function Key
7. Menu/Back Key
8. Confirm Key
V1.1
Correct method : Incorrect method :
Enter management menu: Input ID“0”and press[OK], Input default management password ‘12345’ and press[OK] enter management menu.
Press [OK]Press [OK]
08-07-2011 09:46:15PM Press M to Access Menu
MON
PM
IN
4609
Enter ID
Menu/Exit
ID＃ 0
08-07-2011 09:46:30PM
Enter Password
Menu/Exit
ID＃ 0
08-07-2011 09:47:15PM
Password *****
菜单管理-用户管理Main Menu - Manage User
Select Menu
Search RecordClock Setup Clock Information
Comm.SetupManage User Pen Drive
M=Return OK=Enter08-07-2011 09:47:40PM
Set Communication parameter:
Input administrator passwordInput administrator ID Select [Comm.Setup] Set communication parameter, Press[M] to exit and save
Real TimeComm.IP Address
Server IP
MaskGateway
DisableTCP/IP Client192.168.000.218
192.168.000.007
251.155.255.000192.168.000.001
菜单管理-用户管理Main Menu - Manage User
Search RecordClock Setup Clock Information
Comm.SetupManage User Pen Drive
Menu/Exit Admin Verify
ID＃ 0
08-07-2011 09:47:15PM
Password *****
Menu/Exit Admin Verify
ID＃ 0
08-07-2011 09:46:30PM M=Return OK=Enter08-07-2011 09:47:40PM M=Save and Exit08-07-2011 09:47:40PM
Time Clock Communication Setup
Press [OK] Press [OK] Press [OK]
1
7
9 8
2
3
4
6
5
Sw
ipe Card A
rea
1. LCD
2. 0-9 Num.Key
3. Status Key /directiion key
5. Speaker
4. LED
1
2
3
Swipe Card Area 9
8
7
5
4
6
Fingerprint Sensor
9. Delete KeyOperation Guide
Product AppearanceProduct Appearance Product AppearanceMenu
9.Delete Key
其 他 设 置OtherSetup
Wiring Diagram
Time Setup
Time/Date
DST Setup
Item Explanation
Set the time and date of the terminal
Enable/Disable daylight Saving Time. Select DST define mode: Week/Date.
Default
In/Out Attendance Setup
Re-Verify Interval（0-250）
Log Capacity Warm (0-5000)
Auto In/OutStatus Switch
Item ExplanationSet a period during which time the system only save thefirst successful record and do not save the repeated records.[0]: Disable the function; Max. value is 250 min.
The terminal will alarm when the memory capacity is lessthan the [Log Alert] value.[0]-Not alarm. Max. value 5,000.
Automaticly switch the attendance status following the shift rule of the user.
0
1000
Clock Options
Default
Volume
Password
Reset to factorysettings
Device ID
Item ExplanationSet the terminal voice volume.0-[mute], 5-[Max]: 0-5
The password to enter management mode
The system will back to factory mode. It will delete all the data.
Device ID of the terminal which is required in software communication
12345
5
1
Comm.Setup
Default
ServerMode
Disable
Set the IP address of terminal when communicat with TCP/IP. IP address must be idle fixed IP address.
Subnet Mask of the LAN
Collect the attendance reocrd in real time from terminal inrealtime, When you use Real-time monitoring function of the software you need to enable it.TCP/IP Server mode: Common networkmodeTCP/IP Client mode: Only communicate with the PC which has server IP
Default Gateway of the LAN
It is the IP address of managing PC when set TCP/IPcommunication. The address must be set in ‘Client mode’
192.168.000.218
255.255.255.000
192.168.000.001
192.168.000.007
Comm.
IP Address
Mask
Gateway
Server IP
Item Explanation
Real Time
To Pen Drive Setup
All Records
New Records
Some Users
All Users
Item Explanation
Download all the attendance records and create an Anviz-c folder in the root path of the U pen driver. The attendacne record file named ：KQ.
Download the new attendacne records and create an Anviz-c folder in the root path of the U pen driver. And the new attendance record file named:NKQ.
Download designated users information.
Download all the user information and fingerprints. There are two files store in the Anviz-c folder.User information file named: YG, User fingerprint file named: ZW.
Comm.Setup
Manager User
Add User
Modify User
Delete User
Pen DriverTo Pen Driver
Upload to Clock
Clock Setup
Time Setup
Display Setup
Advanced Setup
Other Options
Clock Information
Search Record Attendance
Self Test
FP Precision
In/Out Att. Setup
Clock Options
Power Manage
Access Control
(The function with mark in the menu is for the specific model unit. Please follow as actual product’s menu. )
Add user information ( Select 【Manage User】and press [OK] ) Add User：Each user can register 10 fingerprints, one password and one card. It requires place the finger twice to register one fngerprint.
Select [Enroll FP]
Press [OK]
Select finger to enroll, after enrollment, press[M] to save and exit
Select [MatchWay]
Press [OK]
User ID 8108
Place Your Finger
0 1 2 3 4 5 6 7 8 9
Enter User information
Setup
PWCard #
Save/Next
Admin NoName
Enroll FPMatchWay
User ID 8108
Select [Add User]
Modify User Delete UserAdd User
Set Verify method, Then press [M] to exit
Default Method
FP + PW + Card
ID + Password
FP + PW
Fingerprint Only
ID + FP
ID + PW + FP
Card Only
Card + FP
Card + PW
08-07-2011 09:48:15PM M=Return OK=Enter 08-07-2011 09:48:15PM M=Exit 08-07-2011 09:48:15PM M=Save and Exit 08-07-2011 09:48:15PM M=Save and Exit
Main Menu - Add User Enroll New User Enroll FP Default Verification Method
Press [OK]Setup
Illustration for placing finger
FP Precision Setup
1 : N
1 : 1
AutoUpdate
VerifyMode
All User Verify
Item
80%
90%
YES
DefaultExplanationThe fingerprint to be verified will be matched with all the fingerprint templates in the database automatically.
The fingerprint to be verified will be matched with the fingerprint template of the specific user ID.In the process of verifying fingerprint, the system will replace the old low quality fingerprint template with the new high quality fingerprint template.
set default verify methods for terminal.
Set verify methods for all users. Now all the users will be set same verifying method.
Display Setup
Language
Date Format
FP Image
Time Format
Item ExplanationThe Language of the menu
Setup the Date format on the LCD
Whether display fingerprint image when place finger.
Setup the Time format on the LCD
Defaultplease refer to
the subject product
YYYY-MM-DD
24 Hour
Show
Access control
Default
Relay control
Wiegand Mode
Lock Delay
Wiegand AreaCode
Item Explanation
Select relay work mode: ‘Open Door’ or ‘Ring Bell’
Wiegand26, Anviz Wiegand and Fixed Wiegand
Time range for the door open delay.
If you upload one fingerprint to two terminals, the same fingerprint’s wiegand outputs are different in the differentterminals. If the two terminals’ wiegand area codes are same, the same fingerprint’s wiegand outputs are samein these two terminals.(0-254)
Open Door
Wiegand 26
10
5（0-15Sec）
Related Documents
