C25 Series APCO P25 Decoders
C25 Series APCO P25 Decoders. P25 Data Interface Desktop Display DecoderPage3 P25 data to RS-232 Serial DataPage 11 P25 data to MDC-1200 FSK Page14 Remote.
Dec 30, 2015
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
P25 Data Interface
Desktop Display Decoder Page 3
P25 data to RS-232 Serial Data Page 11
P25 data to MDC-1200 FSK Page 14
Remote acquisition of P25 data Page 17
Benchtop Display Decoder for the Shop Page 20
Page 2
Desktop Display Decoder
Page 3
Desktop Display Decoder
The C25 II Desktop Display Decoder connects to your
receiver’s unfiltered discriminator.
The C25 will decode the
P25 data and present the
Unit ID on the large easy
to read display.
Page 4
Desktop Display Decoder
The display can also be programmed to show the ID in Hex,
Decimal or Optionally, with an Alias
Hex Decimal Alias
Page 5
Desktop Display Decoder
Like the C25 II, the C25 III decodes P25 data to extract the
Unit and Emergency ID’s
Having two lines of display,
the C25 III gives you more
display features and
options !
Page 6
Desktop Display Decoder
The C25 III can be programmed to show : Source (SRC) Destination (DEST) Talk Group (TGID) Mfgr ID (MFID) Low speed data (LSD) Network Access Code (NAC) Data (DATA) Trunking Sig Block (TSBK)
As well as Date & Time
Page 7
Desktop Display Decoder
The C25 III can be programmed to show :
Source ID
Extended 28-Character Alias
Page 8
Desktop Display Decoder
The C25 III can be programmed to show :
Source ID
NAC and TalkGroup ID
Page 9
Desktop Display Decoder
The C25 III can be programmed to show :
Source ID
Time & Date
Talkgroup ID
Page 10
P25 data to RS-232 Serial Data
Page 11
P25 data to RS-232 Serial Data
Input to C25 I
Discriminator audio (with P25 data)
RS-232 Data out to Console
RS-232 Output
The C25 I takes discriminator audio input
Reads and decodes the P25 data
Outputs the P25 data via RS-232 Serial out
Page 12
P25 data to RS-232 Serial Data
If your console currently reads RS-232 data in the following formats, it can now ALSO decode P25 Unit and Emergency ID’s !
BED-31/1207 Extended BED-31/1207 MODAT CML Cimarron Standard Cimarron Translated Cimarron MultiChannel Cimarron Standard Classic
So, no need to change your entire console in order to read and record Unit ID’s !
Page 13
Page 14
Having a RS-232 serial data output also allows for a larger wall-mounted display.
P25 data to RS-232 Serial Data
P25 data to MDC-1200 FSK
Page 15
P25 data to MDC-1200 FSK
Maybe, your console DIRECTLYdecodes MDC-1200 FSK Data.
Adding P25 channels? No problem!
Adding the Translate Option to your C25 I is the answer !
Page 16
P25 data to MDC-1200 FSK
Input to C25 I
Discriminator audio (with P25 data)
MDC-1200 FSK out to Console
MDC-1200 FSK
The C25 I takes discriminator audio input, Translates the P25
data. Outputs equivalent MDC-1200 FSK data to your
console input.
Page 17
Remote acquisition of P25 data
Page 18
Remote acquisition of P25 dataDo not have receiver discriminator locally?
No problem.
The P25 data is then converted to Cimarron RS-232 data to be sent to your local C25 II or III to be displayed locally on your console or desktop.
Our C25 I can be setup at the remote receiver site. It will take in the discriminator remotely.
Remote Discriminator
RS-232
Page 19
Rack Mount Options
Page 20
For larger systems, a 10-channel rack is available.
For the desktop units, a one or two unit rack is available.
Benchtop Display Decoder for the Shop
Page 21
Benchtop Display Decoder for the Shop
Page 22
When a New P25 capable Service Monitoris not in the budget…
Benchtop Display Decoder for the Shop
Page 23
If you have had the opportunity to repair any of the new P25
transceivers, you might find that most repairs still involve the
same types of issues found on your familiar analog
transceivers:
• Blown RF amp
• Blown AF amp
• Blown speaker
• Broken Ceramic filter
• Broken antenna connector
• Fried DC input (reversed)
• Corrupted CPU data
• Bad Crystal
Benchtop Display Decoder for the Shop
Page 24
You’ll notice, none of these pertain specifically to P25. Repairing a P25 portable or mobile is normally exactly the same as repairing an analog radio.
After the radio is repaired, a verification of the transmitted data is part of the final check.
For shop repair (support of P25 customers) a benchtop decoder can show your transmitted data in an easier to see display. If a ~$30,000 to $40,000 service monitor is not in your budget, the C25 II or III can fill a large part of that need.
Benchtop Display Decoder for the Shop
Page 24
If you have any of these trusted service monitors, you can
check your P25 radio before it leaves your shop.
Source ID
NAC and TalkGroup ID
Any service monitor with discriminator output can drive our
C25 decoder to show:
Benchtop Display Decoder for the Shop
Page 26
Any service monitor with discriminator output can drive our
C25 decoder to show:
Source (SRC) Destination (DEST) Talk Group (TGID) Mfgr ID (MFID) Low speed data (LSD)
Network Access Code (NAC) Data (DATA) Trunking Sig Block (TSBK) As well as Date & Time
Benchtop Display Decoder for the Shop
Page 27
Keep in mind, the C25 II can
also be used on the bench.
The different data values will
be displayed for 2 seconds on
the main display. C25 II
Benchtop Display Decoder for the Shop
Page 28
Your EXISTING Service MonitorCimarron C25 III
YES ! $22,000.00 $2,500.00
Benchtop Display Decoder for the Shop
Page 29
C25 III Compact Serial Printer
Add a compact serial printer and you can have a printout of
the data with a date and time stamp. Serial printer output is
standard on all C25 models
Benchtop Display Decoder for the Shop
Page 30
Richard Galvan
Sales & Marketing Manager
Office: 760-738-3282Cell: [email protected]/Skype: richgee78
Related Documents
