-
GP-5001NC-5001NC-5001W
Combustible gases
Combustible gasesInert gases
Combustible gasesToxic gases
NP-5001
SP-5001
GH-5001
EC-5002 (i) Toxic gases
OX-5001
RM-5002 (i)
RM-5003
Oxygen
4-20mA input for Combustible gases Toxic gases Oxygen etc.
OX-5002 (i)
MODEL
Indicator/Alarm unit
Buzzer unit
GP-5001NC-5001
NC-5001WNP-5001 SP-5001 GH-5001 EC-5002EC-5002i
Output of electric power transmission (non-isolated) 4-20mADC,
max loop load 300
Flashing or lighting lamp: Red(ALM1), Red (ALM2), Self-Latching
or Auto reset, Lock-in
Orange lamp flashing (FAULT), Non-latching/Content
indication
Normally energized or de-energized, Normally-open or closed
contact Rated 0.5A at 100VAC, 1.5A at 30VDC (resistive)
-10 ~ +40℃(14 ˚F to 104 ˚F ), 10 ~ 90%RH (non-condensing)
24VDC ±10%
MAX 7W MAX 3W
Card type with front display used enclosed in a case (a
single-unit or multi-unit case)Specification subject to change
without notice.
MAX 2W MAX 3W MAX 2W
TAN-5000 TAN-5000L
Self-latching Lock-in
Buzzer sound (Released after reset)
Auto reset
Normally energized or de-energized, Normally-open or closed
contact
-10 ~ +40℃ (14 ˚F to 104 ˚F ), 10 ~ 90%RH (non-condensing)
MAX 2W
Card type with front display used enclosed in a case (a
single-unit or multi-unit case)
OX-5001 OX-5002OX-5002iRM-5002RM-5002i RM-5003
Max 600mMax 2.0km Max 2.0km Depending on thedetector
CVVS-4CCVV-4C CVV-4C CVVS-3C CVVS-2C CVVS-3C
Direct sensor signal 4-20mAoutputDirectsensorsignal
4-20mA output
Catalyticcombustion/New ceramic
type
Thermalconductivity
type
Hot-wiresemiconductor
typeSemiconductor
typeElectrochemical
type Galvanic cell type2-wire type 3-wire type
4-20mA outputs
Combustible CombustibleInert gases Combustible /Toxic Toxic
Character LCD (Digital and bar meter )
OxygenCombustible
ToxicOxygen
RM-5000series
Detection gas
Indication
Type of acceptable detector head
Acceptableinput signal
Applicablecable
Max distance
Output signal
Alarm indication
Fault alarm
Alarm relays
Operationcondition
Power supply
Powerconsumption
Dimensions &Weight
Structure
Model
Common gas alarmfunction
Common gas alarm
Common fault alarm
Alarm relays
Operation condition
Power supply
Dimensions & Weight
Structure
Specification subject to change without notice.
SPECIFICATIONS
Ω
LPG, LNG utilitiesRefineriesChemical plantsSemi-conductor
manufacturing plantsEngineering, public worksPower stationIron and
steel worksAutomotive Plating Processes
APPLICATIONCompatible with RM-570A /580 seriesBar meter and
digital multi-indicationHigh level of visibilityLow power
consumptionSupport RS-485 communication functionRoHS
CompliantGlobal standard
FEATURES
RM-5000series
MULTI-CHANNELGAS MONITORING SYSTEMMULTI-CHANNELGAS MONITORING
SYSTEM
Approx. 29.6 (W) × 120 (H) × 92 (D) mm ( 1.16 (W) × 4.72 (H) ×
3.62 (D) inch), 100g (3.52 oz )
Approx. 29.6 (W) × 120 (H) × 92 (D) mm ( 1.16 (W) × 4.72 (H) ×
3.62 (D) inch), 80g (2.82 oz )
C1E-0343
C1E-0343-180630 S
Distributed by:Distributed by:
2-7-6 Azusawa, Itabashi-ku, Tokyo 174 -8744, Japan:
+81-3-3966-1113: +81-3-3558-9110: [email protected]:
http://www.rikenkeiki.co.jp/english
PhoneTelefaxE-mail
Web sitePrinted in Japan
-
Tx
Rx
WHWL
mVmAppb
ppmx10
x10
vol%%LEL
RS-485
Master unit PC, PLC, DCS, etc..
RM-570A/RM-580 seriesSingle-case
RM-570A/RM-580 seriesMulti-case
It can be used with existing Multi/Single case of RM-570A/RM-580
series by use of con-nection case 5000-CC without new installation
works. Also it is compatible with replace-ment to use existing
facilities for expansion.
Indicator/Alarm unitRM-5000 series
Connection case5000-CC
Buzzer
Power lamp
Fault lamp
Full scale
Bar meter indication
Communication status
Inhibit
Maintenance status Double range
Detection unit
Current / Voltage
Gas name/Message
Digital indication
BUZZER UNIT
Reset switch
COMPONENT DESIGNATIONS 3-COLOR LCD INDICATION
Extend monitoring system
INDICATION
INDICATOR/ALARM UNIT
Maximum 32 points can be connected to use RS-485
Alarm reset switch
Turn on during power on
Turn on in any trouble
Open the cover • Power switch
Display the full scale
Divide the full scale in fifty (50)
Display gas concentration and message (7 segments)
Display gas name and message (14 segments)
Depending on gas specifica-tion
Display on during mainte-nance mode
Display in case of Double range specification
Display in pointskip setting, and no alarm in this setting
Display during maintenance mode
Display during communicate with master unit to use RS-485
Power lampTurn on during power on
1st alarm lampFlash for 1st alarm level
2nd alarm lampFlash for 2nd alarm level
Fault alarm lampFlash for any trouble
DisplayDisplay the gas name/concentration
Open the cover • Power switch • PC connection port • Mode switch
• ALM2/▲switch • ALM1/▼switch • TEST/SET switch
Compatible with RM-570A/RM-580 series
Display indicates gas concentration by two ways, Bar meter and
Digital meter. Also LCD will change the color depending on the
concentration, so you can confirm detection condition from a
distance.
-
Tx
Rx
WHWL
mVmAppb
ppmx10
x10
vol%%LEL
RS-485
Master unit PC, PLC, DCS, etc..
RM-570A/RM-580 seriesSingle-case
RM-570A/RM-580 seriesMulti-case
It can be used with existing Multi/Single case of RM-570A/RM-580
series by use of con-nection case 5000-CC without new installation
works. Also it is compatible with replace-ment to use existing
facilities for expansion.
Indicator/Alarm unitRM-5000 series
Connection case5000-CC
Buzzer
Power lamp
Fault lamp
Full scale
Bar meter indication
Communication status
Inhibit
Maintenance status Double range
Detection unit
Current / Voltage
Gas name/Message
Digital indication
BUZZER UNIT
Reset switch
COMPONENT DESIGNATIONS 3-COLOR LCD INDICATION
Extend monitoring system
INDICATION
INDICATOR/ALARM UNIT
Maximum 32 points can be connected to use RS-485
Alarm reset switch
Turn on during power on
Turn on in any trouble
Open the cover • Power switch
Display the full scale
Divide the full scale in fifty (50)
Display gas concentration and message (7 segments)
Display gas name and message (14 segments)
Depending on gas specifica-tion
Display on during mainte-nance mode
Display in case of Double range specification
Display in pointskip setting, and no alarm in this setting
Display during maintenance mode
Display during communicate with master unit to use RS-485
Power lampTurn on during power on
1st alarm lampFlash for 1st alarm level
2nd alarm lampFlash for 2nd alarm level
Fault alarm lampFlash for any trouble
DisplayDisplay the gas name/concentration
Open the cover • Power switch • PC connection port • Mode switch
• ALM2/▲switch • ALM1/▼switch • TEST/SET switch
Compatible with RM-570A/RM-580 series
Display indicates gas concentration by two ways, Bar meter and
Digital meter. Also LCD will change the color depending on the
concentration, so you can confirm detection condition from a
distance.
-
GP-5001NC-5001NC-5001W
Combustible gases
Combustible gasesInert gases
Combustible gasesToxic gases
NP-5001
SP-5001
GH-5001
EC-5002 (i) Toxic gases
OX-5001
RM-5002 (i)
RM-5003
Oxygen
4-20mA input for Combustible gases Toxic gases Oxygen etc.
OX-5002 (i)
MODEL
Indicator/Alarm unit
Buzzer unit
GP-5001NC-5001
NC-5001WNP-5001 SP-5001 GH-5001 EC-5002EC-5002i
Output of electric power transmission (non-isolated) 4-20mADC,
max loop load 300
Flashing or lighting lamp: Red(ALM1), Red (ALM2), Self-Latching
or Auto reset, Lock-in
Orange lamp flashing (FAULT), Non-latching/Content
indication
Normally energized or de-energized, Normally-open or closed
contact Rated 0.5A at 100VAC, 1.5A at 30VDC (resistive)
-10 ~ +40℃(14 ˚F to 104 ˚F ), 10 ~ 90%RH (non-condensing)
24VDC ±10%
MAX 7W MAX 3W
Card type with front display used enclosed in a case (a
single-unit or multi-unit case)Specification subject to change
without notice.
MAX 2W MAX 3W MAX 2W
TAN-5000 TAN-5000L
Self-latching Lock-in
Buzzer sound (Released after reset)
Auto reset
Normally energized or de-energized, Normally-open or closed
contact
-10 ~ +40℃ (14 ˚F to 104 ˚F ), 10 ~ 90%RH (non-condensing)
MAX 2W
Card type with front display used enclosed in a case (a
single-unit or multi-unit case)
OX-5001 OX-5002OX-5002iRM-5002RM-5002i RM-5003
Max 600mMax 2.0km Max 2.0km Depending on thedetector
CVVS-4CCVV-4C CVV-4C CVVS-3C CVVS-2C CVVS-3C
Direct sensor signal 4-20mAoutputDirectsensorsignal
4-20mA output
Catalyticcombustion/New ceramic
type
Thermalconductivity
type
Hot-wiresemiconductor
typeSemiconductor
typeElectrochemical
type Galvanic cell type2-wire type 3-wire type
4-20mA outputs
Combustible CombustibleInert gases Combustible /Toxic Toxic
Character LCD (Digital and bar meter )
OxygenCombustible
ToxicOxygen
RM-5000series
Detection gas
Indication
Type of acceptable detector head
Acceptableinput signal
Applicablecable
Max distance
Output signal
Alarm indication
Fault alarm
Alarm relays
Operationcondition
Power supply
Powerconsumption
Dimensions &Weight
Structure
Model
Common gas alarmfunction
Common gas alarm
Common fault alarm
Alarm relays
Operation condition
Power supply
Dimensions & Weight
Structure
Specification subject to change without notice.
SPECIFICATIONS
Ω
LPG, LNG utilitiesRefineriesChemical plantsSemi-conductor
manufacturing plantsEngineering, public worksPower stationIron and
steel worksAutomotive Plating Processes
APPLICATIONCompatible with RM-570A /580 seriesBar meter and
digital multi-indicationHigh level of visibilityLow power
consumptionSupport RS-485 communication functionRoHS
CompliantGlobal standard
FEATURES
RM-5000series
MULTI-CHANNELGAS MONITORING SYSTEMMULTI-CHANNELGAS MONITORING
SYSTEM
Approx. 29.6 (W) × 120 (H) × 92 (D) mm ( 1.16 (W) × 4.72 (H) ×
3.62 (D) inch), 100g (3.52 oz )
Approx. 29.6 (W) × 120 (H) × 92 (D) mm ( 1.16 (W) × 4.72 (H) ×
3.62 (D) inch), 80g (2.82 oz )
C1E-0343
C1E-0343-180630 S
Distributed by:Distributed by:
2-7-6 Azusawa, Itabashi-ku, Tokyo 174 -8744, Japan:
+81-3-3966-1113: +81-3-3558-9110: [email protected]:
http://www.rikenkeiki.co.jp/english
PhoneTelefaxE-mail
Web sitePrinted in Japan