HINGES C13.12 01.11.2019 C13 SIDE HUNG WINDOWS Waregemstraat 5 - 9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - [email protected] - www.sobinco.com
HINGESC13.12
01.11.2019
C13
SIDE HUNG WINDOWS
Waregemstraat 5 - 9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - [email protected] - www.sobinco.com
C13.12.02 SIDE HUNG OPEN OUT WINDOWS
HINGES
C13.12
CONTENTS
1. General ................................................................................ C13.12.03
2. Visible Chrono hinges ......................................................... C13.12.04
3. Adjustable visible Chrono hinges ....................................... C13.12.05
4. Reinforced visible Chrono hinges ...................................... C13.12.07
5. Chrono Invision Pro hinges ................................................ C13.12.09
6. Chrono Invision Go hinges ................................................. C13.12.10
7. Hinge wedges ...................................................................... C13.12.117.1. Hinge wedge n° 26110-752 C13.12.117.2. Hinge wedge n° 26130-752 C13.12.11
SIDE HUNG OPEN OUT WINDOWS C13.12.03
HINGES
C13.12
1. General• Side hung open out windows are possible with visible hinges and with concealed hinges.
• The concealed hinges offer the following advantages: - The concealed hinges have the advantage that the hinges are invisible when the window is closed. - The possibility to use a narrow frame profile: aesthetic aspect and glass surface will be larger. - The cleaning of the window frames will be easier because all the corners are easily accessible. - Colour-independent, so reducing stock and increasing cost effectiveness. - No need to remove the outer gasket to mount the hinges. A better acoustic, wind and water tightness is obtained.
- The fully concealed hinges can not be damaged or spoilt during transport, installation or other work to the building.
• The concealed hinges are available in two different versions: - Chrono Invision Pro: fully concealed clampable hinges for vent weights up to 170 kg. - Chrono Invision Go: fully concealed clampable hinges for vent weights up to 90 kg.
• All parts are made of non-corroding materials.
Profile dimensions• The Chrono hardware is available to suit a frame groove of 14/18 mm or a frame groove of 10/14 mm.
Chrono Invision Pro
Frame groove14/18 mm
Frame groove10/14 mm
A 14 ± 0.5 10 ± 0.5
B 18 ± 0.5 14 ± 0.5
Chrono Invision Go
Cut out vent profile
C13.12.04 SIDE HUNG OPEN OUT WINDOWS
HINGES
C13.12
2. Visible Chrono hingesGeneral
• Application: standard side hung open out windows.• Vent dimensions:
- Fb = max. 1400 mm - Fh = max. 2400 mm - Vent weight < 90 kg
• The hinges n° 26140-756 and -766 are secured by means of a security pin to prevent removal of the hinge pin and are suitable for side hung open out windows.
• Finish: aluminium anodised or polyester powder coated (more than 450 RAL colours).
Preparations
Top hinge n° 26140-7562 4200-150.6 bush1 4200-152.3 hinge pin1 4200-152.9 security pin1 26000-750-4 clamping plate vent part1 26000-766-1 vent part1 26140-760-1 frame part2 30140-760-3 cover2 35000-760-3 screw for vent part
Bottom hinge n° 26140-7662 4200-150.6 bush1 4200-152.3 hinge pin1 4200-152.9 security pin1 26000-760-4 clamping plate vent part1 26000-766-1 vent part1 26140-760-1 frame part2 30140-760-3 cover2 35000-760-3 screw for vent part
SIDE HUNG OPEN OUT WINDOWS C13.12.05
HINGES
C13.12
3. Adjustable visible Chrono hingesGeneral
• Application: standard side hung open out windows.• Vent dimensions:
- Fb = max. 1400 mm - Fh = max. 2400 mm - Vent weight < 130 kg
• Finish: aluminium anodised or polyester powder coated (more than 450 RAL colours).
• Lubricate the hinge wedges to reduce wear.• Hinge wedges: see page C13.12.11.
>90kg
Plate n° 30000-760-5 for supporting adjusting screw (order separately)
ORFrame groove14-18 mm
Frame groove10-14 mm
Top hinge n° 26140-7511 20000-751-1 vent part1 20000-751-3 clamping plate vent part2 M5x10TFL DIN 965 screw vent part1 30140-750-2 hinge pin1 35140-750-1 frame part
Bottom hinge n° 35140-7601 30000-760-2 hinge pin1 30140-760-2 adjustment bearing piece1 30140-760-3 cap1 35000-760-1 vent part2 35000-760-3 screw vent part1 35000-760-4 clamping plate vent part1 35140-760-1 frame part
Reinforcement set n° 35140-790 (>90kg)1 35140-790-1 reinforcement piece2 30140-790-2 screw
Hinge wedge n° 26110-752 (groove 14-18)or
Hinge wedge n° 26130-752 (groove 10-14)
C13.12.06 SIDE HUNG OPEN OUT WINDOWS
HINGES
C13.12
Preparations
Preparation hinges
Preparation reinforcement set
• For windows with vent weight between 90 kg and 130 kg the reinforcement set n° 35140-790 must be used to reinforce the adjustable top hinge.
• The M4x10 thread forming screws must fix into at least 6 mm of aluminium.
• Drilling jig n° 35000-955 is available for drilling the holes.
SIDE HUNG OPEN OUT WINDOWS C13.12.07
HINGES
C13.12
4. Reinforced visible Chrono hingesGeneral
• Application: side hung open out windows, used as balcony door or window door.• Vent dimensions:
- Vent width Fb = max. 1200 mm - Vent height Fh = max. 2400 mm - Vent weight < 130 kg - Ratio of vent width Fb / vent height Fh = max. 1,5
• The hinges are suitable for both frame groove 14/18 mm and frame groove of 10/14 mm.
• Important: the clearance between frame and vent must be at least 5 mm.
• Finish: aluminium anodised or polyester powder coated (more than 450 RAL colours).
Top hinge n° 26164-7501 4200-152.3 hinge pin1 26000-750-4 clamping plate vent part1 26060-760-1 vent part1 26160-760-1 frame part2 30140-760-3 cap1 30140-790-2 screw M4x10 Din965 7500M2 35000-760-3 screw M5x8 Din9651 M4x4 Din916 screw
Bottom hinge n° 26164-7601 4200-152.3 hinge pin1 26000-760-4 clamping plate vent part1 26060-760-1 vent part1 26160-760-1 frame part2 30140-760-3 cap1 30140-790-2 screw M4x10 Din965 7500M2 35000-760-3 screw M5x8 Din9651 M4x4 Din916 screw
Frame groove14/18 mm
Frame groove10/14 mm
A 14 ± 0.5 10 ± 0.5
B 18 ± 0.5 14 ± 0.5
C13.12.08 SIDE HUNG OPEN OUT WINDOWS
HINGES
C13.12
Installation
• It is required to mount reinforcement piece n° 35000-901-2 on the top hinge of the middle hinge group.
• Number of hinges: A+B+C - A = 1x hinge n° 26164-750 at the top - B = number of hinges n° 26164-750 in the middle - C = 1x hinge n° 26164-760 at the bottom
• The hinges in the middle are equally divided between the top hinge and the bottom hinge.
Fh Fbmax. 1200 mm
max. 1800 mm 1+1+1max. 2400 mm 1+2+1
1 or 2 hinges
SIDE HUNG OPEN OUT WINDOWS C13.12.09
HINGES
C13.12
5. Chrono Invision Pro hingesHinge set Hinge setfor frame groove 14/18 mm for frame groove 10/14 mm
• Application: standard side hung open out windows and balcony doors or window doors.
• Vent dimensions: - Fb = max. 1200 mm (balcony doors/window doors) - Fb = max. 1400 mm (standard windows) - Fh = max. 2400 mm - Vent weight < 170 kg
• Maximum opening angle: 90° or 105°.
• Hinge wedge n° 26110-752 or n° 26130-752 is mounted at the hinge side: - Fh = 1201-1800 mm : 1 piece - Fh = 1801-2400 mm : 2 pieces
• Lubricate the hinge wedges to reduce wear.
• Installation and adjustment hinges: see chapter C11.14.
• Adjustment hinge wedges: see page C13.12.11.
Hinge set n° 23114-10R(L)1 23114-770R(L) top hinge1 32114-780R(L) bottom hinge
Hinge wedge n° 26110-752
Hinge set n° 23134-10R(L)1 23134-770R(L) top hinge1 32134-780R(L) bottom hinge
Hinge wedge n° 26130-752
Right hand = illustratedLeft hand = opposite view
Right hand = illustratedLeft hand = opposite view
C13.12.10 SIDE HUNG OPEN OUT WINDOWS
HINGES
C13.12
6. Chrono Invision Go hingesHinge set Hinge setfor frame groove 14/18 mm for frame groove 10/14 mm
• Application: standard side hung open out windows and balcony doors or window doors.• Vent dimensions:
- Fb = max. 1200 mm (balcony doors/window doors) - Fb = max. 1300 mm (standard windows) - Fh = max. 2400 mm - Vent weight < 90 kg
• Maximum opening angle: 100°.• Attention! Never adjust the bottom hinge vertically before installation.• Hinge wedge n° 26110-752 or n° 26130-752 is mounted at the hinge side:
- Fh = 1201-1800 mm : 1 piece - Fh = 1801-2400 mm : 2 pieces
• Lubricate the hinge wedges to reduce wear.• Installation and adjustment hinges: see chapter C11.14.• Adjustment hinge wedges: see page C13.12.11.
Right hand = illustratedLeft hand = opposite view
Hinge set n° 23117-10R(L)1 23117-770R(L) top hinge1 32107-780-1R(L) vent part bottom hinge1 32117-780-2R(L) frame part bottom hinge1 32107-780-3 guiding piece bottom hinge
Hinge wedge n° 26110-752
Right hand = illustratedLeft hand = opposite view
Hinge set n° 23137-10R(L)1 23137-770R(L) top hinge1 32107-780-1R(L) vent part bottom hinge1 32137-780-2R(L) frame part bottom hinge1 32107-780-3 guiding piece bottom hinge
Hinge wedge n° 26130-752
SIDE HUNG OPEN OUT WINDOWS C13.12.11
HINGES
C13.12
7. Hinge wedges7.1. Hinge wedge n° 26110-752
• For frame groove 14-18 mm.• Lubricate the hinge wedges to reduce wear.
Standard inside gap (21 mm)
Smaller inside gap
7.2. Hinge wedge n° 26130-752• For frame groove 10-14 mm.• Lubricate the hinge wedges to reduce wear.
Normal rebate More gasket pressure
Normal rebate More gasket pressure
Normal rebate
More gasket pressure
Mount the vent part at the narrowest part
Mount the vent part at the widest part