C_105

TOOLS WITH CHARACTER!

Edition 2008

Accessories for handheld tools(drill stand, flexishaft, etc.)

16 /18 – 19

Lightweight bench tools (with equipment-related accessories)

28 – 35

36 – 43

Bits and cutters of industrial and dental(rotating) quality

22 – 27

Middleweight bench tools (with equipment-related accessories)

2

PROXXON precision electrical tools are made for those who work and enjoy miniature and engineeringtools. We specialise in manufacturing high-quality tools offered at reasonable prices. All machines andtools produced have been individually tested, item by item. Our aim is to sell products of the highest quality.We take great pride in our product and technical knowledge. If you wish to order spare parts or requirefurther information please

e-mail [email protected] call +49 - 6575 - 78-0 visit www. proxxon.com

The tools depicted in the contents represent the variety of PROXXON tools.

Visible and tangible quality!

Handheld tools 230V 3 – 11

Other precision tools and equipment for delicate work

20 – 21

Mill/drill system with 43mm-spindle neck 54

11

Handheld tools 12V and mains adaptors 12 – 17

Lathe and milling systems 44 – 53

Accessories for mill/drill units with 43mm-spindle neck

55

Professional literature for model builders

Page/Pages

Multiversatile equipment for delicate projects. Precise andquiet. With quick change chuck for 0.3 – 3.2mm shanks.

3

For drilling, milling, grinding, polishing, cleaning, carving and

engraving.

The maximum speed of 20,000rpm is continuously variable down to5,000rpm. The full wave electronic speed control results in virtually con-stant torque, even at lower speeds, in turn facilitating micro drilling, clea-ning and polishing. The spindle runs in a precision ball bearing and is lif-ted with a lock button. The 20mm collar fits MICROMOT drill stands andvices. The machine is fitted with a special, balanced, low noise DC motor withhigh life expectancy. Stable housing of glass-fibre reinforced POLYAMIDEwith soft components in the finger grip area. Complete with 43 quality inserts in a sturdy plastic case.

Technical data:

5,000 – 20,000rpm. Maximum power consumption 100W, 220 - 240V.Length 200mm. Weight 450g. Insulated according to class 2 require-ments. Keyless chuck with 0.3 – 3.2mm capacity.

NO 28 472

Precision drill/grinder FBS 240/EStrength lies in calm!

Stable housing of glass-fibre reinforced POLYAMIDE withsoft components in the finger grip area.

Complete with 43 high-quality bits

and cutters in a durable polypropylene case.

Note:

The FBS 240/E may also be fitted with the optionalMICROMOT steel collets (see page 22).

Note:

MICROMOT steel collets are hardened and thus have a high, consistentflexibility. They also maintain prolonged accuracy, even after regularuse (these collets should not be compared with unhardened, four-slitcollets of brass and aluminium). The triple slit collet is substan-tially more difficult to manufacture than the four-slit type,

but offers a better load-bearingsurface. This is especially important for cutters with small shaft diameters.Also see page 22.

4

Elektro-Feinwerkzeuge. Echte Einhandgeräte. Mit Gehäuse-kopf aus Alu-Druckguss. Leise, präzise und effizient!

This high-revving, special balanced, low noise DC motor has full-wave elec-tronic speed control. The ground steel spindle runs in a ball bearing. Six highconcentricity MICROMOT collets, (1.0 – 1.5 – 2.0 – 2.4 – 3.0 and 3.2mm

and closure nut) are included.

Technical data :Speed 5,000 to 20,000rpm. Power consumption (max) 100W, 220 – 240V.Stable head of die-cast aluminium and main housing of glass-fibre reinforcedPOLYAMIDE. Length 230mm. Weight approx. 500g. Insulated to class 2. The20mm MICROMOT collar allows fitting of optional drill stands, horizontal stands,etc. Supplied with 34 bits and cutters in a stable plastic case.NO 28 481

With 34 bits and cutters of industrial quality, all shafts Ø 2.35mm. Complete with six triple slit steel collets covering

1.0 to 3.2mm (see page 22).

• For drilling, milling, grinding, polishing, cleaning, cutting, carving, engraving and signing.

• For precision mechanics, model builders, jewellers,opticians, artists and electronic enthusiasts.

Professional drill/grinder IB/E

Precision electrical tools. Genuine single handed use. With die-cast aluminium heads. Quiet, precise and efficient!

Ball bearing spindle of ground steel withlock button for rapid cutter changing.

Quiet, powerful 100W motor with full waveelectronics for speeds between 5,000 and20,000rpm.

Quality without compromise: isolationaccording to class 2 requirements.

Streamlined head of die-cast aluminium forexact bearing seats and optimal stability.

1

3 2

Note:The equipment offered is supplied in a new storage case made from highgrade polypropylene. It is attractive, extremely stable and sufficiently largeto enable the machine to be replaced in it after completion of the work without

fiddly refitting. A clear label on the side identifies the contents.

High concentric accuracy (maximum runout 3/100mm). No runout in your bits and cutters.

1

23

With MICROMOT hardened steel collets (1.0 – 1.5– 2.0 – 2.4 – 3.0 and 3.2mm).Technical data:

220 - 240V. 100W. 3,000 - 15,000rpm. Length270mm. Weight 550g. Insulated to class 2.

NO 28 492

Safely stored in an attractive and extremely stable case made fromhigh-grade polypropylene, as described on the left.

Technical data:

220 – 240V 100W. 5,000 – 20,000/min.Length 300mm. Weight 630g.Insulated to class 2.

NO 28 485

With a set of gears running on several ball bearings in a stable,

die-cast aluminium housing head.

Also suitable for right-angled separation of rods. With a special balan-ced, powerful, quiet and long-lasting DC motor. Infinitely variable rpm(full wave electronics). Main housing is made of glass-fibre reinforcedPOLYAMIDE.Safely stored in an attractive and extremely stable case made fromhigh-grade polypropylene, as described on the left.

5

Long neck angle milling/drilling unit WB 220/E

Problem solution: unit with long and slender spindle neck forworking in tough-to-reach areas (also in hollow objects).

Head of die-cast aluminium with 100mm long spindle neck (and 20mm

MICROMOT collar).

Ideal for internal grinding and the use in slots and channels. Special balanced,powerful, quiet and long-lasting DC motor. Variable (full wave) electronic speed control; main housing ofglass-fibre reinforced POLYAMIDE. MICROMOT collets(1.0 – 1.5 – 2.0 – 2.4 – 3.0 and 3.2mm). Well presentedin a plastic case.

Tough and durable special balanced, powerful, quiet and long-lasting DC

motor.

Quiet planetary gear gearbox of die-cast aluminium (main housing made ofglass-fibre reinforced POLYAMIDE).Handy switch with integrated electronic speed control and lock. The RÖHMchuck allows the precision removal of the inserts. Safely stored in an attractiveand extremely stable case made from high-grade polypropylene, as describedon the left.

Technical data:

220 – 240V. 100W. 0 – 3,000rpm. RÖHM chuck capacity 0.5 – 6mm. Capacityin steel 5mm. Length 225mm. Weight 900g. Insulated to class 2.NO 28 490

Long neck straight drill/grinder LB/E

Pocket drilling machine COLT 2

6

The long, slim head of die-cast aluminium makes the LWSideal in numerous applications, even parting.

For working steel, non-ferrous metals, glass, ceramics, wood and pla-

stic. For cutting, rough-machining, grinding, precision polishing, fine polish-ing and carving wood. Special balanced, powerful, quiet and long-lasting DCmotor. Stable head mad of glass-fibre reinforced POLYAMIDE.A corundum grinding disc (grit 60), a fan sanding disc (grit 100) and a rein-forced cutting disc are included.Safely stored in an attractive and extremely stable case made from polypro-pylene.

Long neck angle grinder LWS

Technical data:

220 – 240V. 100W. 13,000rpm. Disc diameter 50mm with 10mm interval.Length 270mm. Weight 550g. Run down time less than 1 second. Insulatedto class 2.

NO 28 547

Corundum grinding disc for LWS Used for de-burring, grinding, sharpening and de-rusting steeland non-ferrous metals. Ø 50mm.NO 28 585 60 grit NO 28 586 36 grit

Silicon carbide grinding discs for LWS Used on hard materials such as glass, stone, ceramics andeven hardened steel. Ø 50mmNO 28 587 60 grit

Corundum fan sander for LWSFor grinding tempe-red cast iron, cast iron, stainless steel,non-ferrous metals, wood and plastic. Low wear-resistant. Ø50mm.NO 28 590 100 grit NO 28 591 150 grit

Corundum bound cutting disc for LWS With woven reinforcement,50 x 1 x 10mm. For cutting steel,non-ferrous metals, plastic and wood. Ø 50mm.NO 28 154

Backing disc for LWS Self-adhesive type, for use with corundum bound sandingdiscs and san-ding fleece. Ø 50mm.

NO 28 548 1 piece

Corundum sanding discs for LWS Self-adhesive type, used on flat and convex surfaces. Ø 50mm.NO 28 549 80 grit 12 pieces NO 28 550 120 grit 12 pieces NO 28 551 180 grit 12 pieces NO 28 552 240 grit 12 pieces

Sanding fleece for LWS Self-adhesive type, used for cleaning, matting and sanding ofsteel, stainless steel and non-ferrous metals. Also used forpaint removal. Ø 50mm.NO 28 554 medium 5 piece NO 28 555 fine 5 piece

Rasp plate with metal burrs made fromwolfram carbide for LWS

For model-making, cleaningand smoothing of wood, pla-stics and glass-fibre reinforcedobjects. No expenditure of effortis needed, easy and precisehandling. Not suitable for metalprocessing.

NO 29 050

NEW

The equipment offered is supplied in a new storage case made from high-grade polypropylene. It is attractive, extremely stable and sufficiently

large to enable the machine to be replaced in it after completion of the workwithout having to ‘fiddle’. A label on the side identifies the contents.

7

Small, torque resistant, solid and versatileDie-cast aluminium heads for high stability !

For shape finishing, mortising, fine polishing (flat surfaces). Also for de-

burring metal, paint removal and fine finishing.

Head of die-cast aluminium for high stability and precise ball bearing fitting.Main housing made of glass-fibrereinforced POLYAMIDE.Variable (full wave) electronic speedcontrol. The head rotates through60°. Complete with 2 off 80 and 2off 180 grit belts. Safely stored in an attractive and

extremely stable case made from high-grade polypropylene, as described onthe left.

Corundum on tear-resistant, woven backing. Sands metal, non-ferrousmetals, wood and plastics efficiently. 10 x 330mm.

NO 28 583 80 grit 5 piecesNO 28 582 120 grit 5 piecesNO 28 581 180 grit 5 pieces

Identical with the foregoing item, but with burrs made from silicon carbidefor grinding and de-burring of glass and ceramics. Also suitable for grindingbrass, steel and cast iron.NO 28 579 180 grit 5 pieces

12 V3 VA

3 VA

döjfkdgj sdgbjdsgj döfjdkgfjk

dlfida dlg,dlg d dgfdl fg - 12 VA 12 VA 12 VA

12 V3 VA

3 VA

döjfkdgj sdgbjdsgj döfjdkgfjk

dlfida dlg,dlg d dgfdl fg - 12 VA 12 VA 12 VA

Super jig saw SS 230/E

Belt sander BSL 220/E

This unit offers fantastic and precise cutting capacity.

Stable head of die-cast zinc for precise fitting. The housing head is made of glass-fibre reinforced POLYAMIDE. Specialbalanced, low noise DC motor with high life expectancy. The stroke speed isvariable by means of full wave electronic speed control. Footplate adjustableup to 45° for mitre cuts. Ideal for tight curves in wood (up to 12mm), PCcards to 5mm and non-ferrous metals to 3mm. Complete with 4 super-cutsawing blades of various pitches for wood, plastic and metal. Safely storedin an attractive and extremely stable case made from high-grade polypropy-lene, as described on the left.

Technical data:

220 – 240V. 100W. Stroke speed of 2,000 – 4,500/min. Length 230mm.Weight 700g. Insulated to class 2.NO 28 530

Jig saw blades made of special steelPitch of 1.06mm, teeth ground and set. Usable on hard and soft woods, plywood,fibreglass reinforced sheets as well as soft plastics. Fits SS 230/E and STS 12/E.NO 28 054 Pack of 2

Jig saw blades made of HSSTooth pitch of 1.5mm, with teeth set and ground. Usable on metals, non-ferrous metals, aluminium and softer alloys, fibreglass, Plexiglass and insulatingmaterials. Fits SS 230/E and STS 12/E.NO 28 056 Pack of 2

Note:

The alternative 12V jig saw STS12/E is described on page 14.

Replacement belts for BSL 220/E

The head rotates through 60°.

Technical data

220 – 240V. 100W. Belt size 10 x 330mm (usable sanding area 10 x110mm). Belt speed 300 – 700rpm. Length 350mm. Weight 650g. Insulatedto class 2.NO 28 536

For precision square excavations,are now available HSS immersionsaw blades with an 8 and 14mmwidth of cut.

Oscillating motion far better than conventional orbital motion. Hence suitable for cutting and precision carving.

8

The oscillating motion ensures lack of vibration and kickback and allows the fitting of

cutting blades too!

HSS immersion saw blades for OZIFor exact square excavationsand other forms. For makinghatchways and windows inship and aircraft models. Cutswood, plywood, plastics andaluminium. Max. immersiondepth 16mm.NO 28 897 Saw blade width 8mm NO 28 898 Saw blade width 14mm

The OZI 220/E and BBS/S are also supplied in a new storage case made

from high-grade polypropylene.

Head of die-cast zinc, ensuring exact andstable housing for the moving parts. Allowsprecise and stable storage of moving parts.

Delta sander OZI 220/E

Sanding area 65 x 65 x 65mmwith gummed pads allowsquick changing.

Small yet efficient sander!

For grinding surfaces in very tight spots, e.g. corners, sides and inacces-sible areas. The oscillating motion ensures quiet operation and also facilita-tes cut-ting. Insert and file! The variable speed facility ensures the correctspeed for every material. Special, balanced, low noise DC motor with highlife expectancy. Main housing of glass-fibre reinforced POLYAMIDE. Comple-te with 4 sanding discs (2x 80 grit, 1x 150 grit and 1x 240 grit). In an attrac-tive case, as described on the right.

Technical data:

220 – 240V. 100W. Sanding frequency of 3,000 – 10,000rpm. Length230mm. Weight 550g. Insulated to class 2.NO 28 520

The OZI cuts in those cases where arotating saw blade can no longer beused (in this case using the HSS separation blade, see p. 9).

Diamond files for OZIFor dulling, de-burring andpost-processing of glass, por-celain and ceramics. For grin-ding and de-burring of harde-ned and unhardened steel. Aradius on one side makes itpossible to work at round,recessed spots. Width 25mm. Immersion depth20mm.NO 28 906 120 gritNO 28 907 180 grit

NEW

NEW

Compact, light and well balanced. Now with an extrapowerful drive for a high material removal capacity.

9

HSS cuttingblade forOZIOscillates, makingit ideal for cuttingmetal, wood, PCcards, plastics, pla-ster of Paris andmany other materials. The segment cut facilitates exact cutting right into cor-ners.NO 28 900 ø 65mm

Diamond cutting blade for OZIOperation asdescribed abovefor the HSS blade.Cuts marble,bricks, dry wall-ing and manyother materials.Ideal for interior finishing and sanitary and electri-cal installation.NO 28 902 ø 65mm

High durability corundum (aluminium oxide) pads.Grain fil-led with special filler to prevent prematureclogging. Deposited on special backing paper.Self-adhesive. Standard packing

NO 28 880 80 grit 5 pieces NO 28 882 150 grit 5 pieces NO 28 886 240 grit 5 pieces

Bulck packing

NO 28 891 80 grit 25 pieces NO 28 893 150 grit 25 pieces NO 28 895 240 grit 25 pieces

Grinding bands made from high-quality corundum (aluminium oxide)Mounted on a high-performance support. For the grinding of metal, non-ferrous metals, wood and plastics.40 x 265mm.NO 28 922 80 grit 5 pieces NO 28 924 120 grit 5 pieces NO 28 926 180 grit 5 pieces NO 28 928 240 grit 5 pieces

Sanding pads for OZI 220/EBelt sander BBS/S

MICROMOT tool holder

Powerful special DC motor, quiet and long-lasting.

Left-justified band grinder, making it possible to process surfaces ‘right to the corner’. Fine adjustment of rol-lers prevents lateral rolling off. Easy replacement of bands by means of a spring tension system without theuse of tools. Housing is made of glass-fibre reinforcedPOLYAMIDE. Complete with screw clamp and with 5 x 120grit and 240 grit grinding bands. Supplied in a practical case as described on page 8.

Technical data:

220 – 240V. 150W. Grinding band 40 x 265mm. Grindingsurface 60 x 40mm, band speed 160m/min. Length175mm. Weight 700g. Class 2 insulation..

NO 28 526

For stationary use of MICROMOT electrical precision

tools with metal head in combination with a vise.

Especially suited for industrial drill/grinder IB/E, belt sander BSL 220/E, longneck angle grinder LWS, super jig saw SS 230/E and delta sander OZI 220/E. Made of glass-fibre reinforced POLYA-MIDE.

NO 28 410

Flexible spatula made from springsteel for OZI

Suitable for the removal of paint, adhesive residues(tile adhesive), for digging out old silicone fromjoints, but also for treating cars (abrasion of tar andunderbody protection). 50 x 70mm.

NO 28 904

NEW

The BBS/S is also intended for sta-tionary use. A screw clamp isincluded.

10

For joiners, model makers and wood carvers.Now with die-cast aluminium gear head.

Motor-driven carving device MOS

For the carving of all types of wood. For the restoration of furniture. For

the restoration of antiques. For linocuts and precision paint removal.

It is also possible to process plaster. Special, balanced, low noise DC motorwith extreme high life expectancy. Gear hear made of die-cast aluminium. Mainhousing of glass-fibre reinforced POLYAMIDE. Three high-grade Japanese knifeinserts made from bimetal (U-form, V-form ad flat blade) are included. In anattractive and extremely stable case made of high-grade polypropylene.

Technical data:

220 – 240V. 50W. Stroke speed 10,000rpm. Length 230mm. Weight 680g.Class 2 insulation.

NO 28 644

3 Japanese knife inserts made frombimetal are included.

Replacement carving knife inserts for MOS

Super-quality of bimetal (made in Japan).One each V-form, large and small rounding-off, flat with a straight and a rounded end.NO 28 572

Extremely sharp and easy to handle; material is removedin a controlled manner, without the application of force,working along or against wood grain. High resistanceand easy to clean, using a Bunsen burner. Also suitablefor rubber, plastic foam and silicone. For working at5,000- to 20,000rpm. Shafts 3,2mm.NO 29 062 Cone 8,0 x 12mmNO 29 060 Cylinder with round head 7,5 x 12mmNO 29 064 Taper 4,0 x 19mm

New for wood processing: insertion tools with wolf-ram carbide burrs for model-making, cleaning andsmoothing of wood and glass fibrereinforced synthetics. Not suitablefor metals!

Multiform grindstone

For the aforementioned carving blades. Prepro-filed. A pure oilstone for knife-sharp cutting.

NO 28 578 100 x 63 x 15mm

The MOS offered is supplied in a new storage case made from high-gradepolypropylene. It is attractive, extremely stable and sufficiently large toenable the machine to be replaced in it after completion of the work with-out having to ‘fiddle’. A label on the side identifies the contents.

Note:The new wolfram carbide rasp plate is idealfor woodcarvers and as a supplement for amotorised carving machine (material asdescribed earlier) in connection with ourLWS long-neck corner grinder. Details onpage 6.

NEW

NEW

11

Small, handy, precise and particularly easy to handle.Main housing of die-cast aluminium.

Ideal for slotting, rounding over, counter boring and stock removal inwood, plastic, acrylic plastic, MDF, URIOL, ceilings and many more. Power-ful universal AC motor. Base housing of die-cast aluminium and face ofsmooth gliding synthetic material. Main housing of glass-fibre reinforcedPOLYAMIDE. With MICROMOT collets (1.0 – 1.5 – 2.0 – 2.4 – 3.0 and3.2mm). Parallel and circle jig and fitted with a dust collector.

Technical data:

220 – 240V. 130W. Footprint 70 x 100mm.Total height 180mm. Weight1,400g. Class 2 insulation.

NO 28 568

Note:

Wood router cutters are offered on page 27.

Manual for creative model-makers

Over 280 pages of information and tips from all areas of model building. All illust-rations in colour.

Attractively produced, this bookaffords a good insight into the areasof materials and their application pos-sibilities. It describes tools and worktechniques in general and givescomprehensive technical explana-tions concern-ing MICROMOTdevices and available accessories.

A large portion is devoted to practicaltips and a clear appendix of usefultables completes the contents of thishelpful manual.German only!

NO 28 996

MICRO router MOF

Practical spindle lock buttoneases bit changing.

Lock button for depth.

Parallel and circle jig(with centring pin) of die-

cast aluminium.

Support columns set back to opti-mise viewing of cut.

Dust collector with a 300mm long suction tube and adaptor for use in com-bination with a regular vacuum cleaner. We recommend for that purpose our

vacuum cleaner controller AS/E (page 33).

Precision milling/drilling machines MICROMOT 50 and 50/E. Ball bearing spindle and high-quality collets for efficient insertion of tools.

12

• Ideal for electronic hobbyists, model-builders, mechanics, jewellers, opticians, artists, chiropodists, dental technicians, tool and casting makers, etc.

• 12V supply allows the safe use of coolant (wet grinding and cutting).

• For milling, drilling, grinding, polishing, brushing, cleaning, de-rusting, cutting, engraving, signing.

• For working steel, precious metals, glass, ceramics, plastics and precious stones.

The diameter of only 35mm makes it easy to handle. The weight of 230g, quietness and effortless drive via the balanced motorwith ground spindle and collar bearing all contribute to the ergonomic design. The high-quality MICROMOT steel collets (seepage 4) ensure accurate clamping of the cutters, without rattling or thumping of bits and cutters. The size of the machine dictatesa 12V drive system, use of a trans-former is thus required. MICROMOT transformers of at least 1.0A are recommended.

Mill/drill unit MICROMOT 50/E

High precision: ball bearing spindle. Special balanced, low noise DCmotor with high life expectancy. Variable electronic speed control with feed-back effect (high engine power in the lower revolutions area). Housing of glass-fibre reinforced POLYAMIDE with soft component in the finger grip area.20mm-collar for fitting MICROMOT accessories. Six MICROMOT collets (1.0 -1.5 - 2.0 - 2.4 - 3.0 and 3.2mm) are supplied.

Technical data: Direct voltage 12 - 18V. Power consumption is 40W max.Stroke speed from 5,000 to 20,000rpm. Length 220mm. Weight 230g.NO 28 510

Mill/drill unit MICROMOT 50

As MICROMOT 50/E, except that no electronic speed control is fitted.

No load speed is 20,000rpm.NO 28 500

Multiway adapter MF 5 for 12 Volt tools

With mounting holes.

Fitted with 150cm spiral cable, 4 MICROMOT sockets and one pair of stan-dard 4mm banana sockets. The LED indicates power availability.NO 28 994

MICROMOT extension cord (12 Volt)Handy spiral cable with coded plug and socket to prevent polarity reversal.Length 300cm. Not illustrated.NO 28 992

VOLT12

The tens of thousands of these units in use speak for themselves: they are a joy to use!

The MICROMOT standard 20mm collar allowsuse in the drill stand MB 140/S, universal holders UHV and UHZ and angleadapter WS 90.

Stable housing of glass-fibre reinforced POLYA-MIDE. With soft component in the finger grip area for extended use.

MICROMOT 50 and 50/E

Footswitch FSFor free-hand precision work .

For all machines with a Euro plug (class 2 insulation) and maximum powerabsorption of 500W. Ideal forboth portable and stationarymachines. Housing of glass-fibrereinforced NYLON. The connectingcord (230V) is 250cm in lengthand the output cord 50cm. Thetransformer is connected to the FSwhen using 12V machines.

NO 28 700

The new 50/EF with quick-action chuck. Practical for usewith different shaft diameters.

13

VOLT12

Quick-action chuck of 0.3 – 3.2mm. Primarilyadvantageous when working with HSS borers ofdifferent power, complying with DIN 338.

Model building and engraving set. Complete with MICROMOT drill/grinder 50/E,mains adapter and 34 bits and cutters of dental quality.

Both sets are packed in an attractive plastic case, with 34 industrialrespectively dental quality bits and cutters.

MICROMOT 50/EF

MICROMOT drill/grinder 50/E (as described on the left). The set includes 34 industrial respectively dental quality bits

and cutters:

1 diamond grinding bit, 1 fine miller, 0.5 and 1.0mm micro-drills, 1 brass brush, 4 high-grade corundum grinding bits (cylinder,sphere, disc and cone shaped), 1 saw blade, 4 grinding wheels (2 corundum, 2 silicon carbide), 20 cutting discs and 1 arbor.The 6 MICROMOT collets ranging from 1.0 – 3.2mm (description on page 4) are also included. With mains adaptor for 220 –240V operation (12V, 1.0A).NO 28 515

Stable housing made of glass-fibre reinforcedPOLYAMIDE. With a pleasantly soft handle.

20mm-system adaptation. For flange mountingof MICROMOT accessories.

NEW

Note:

The MICROMOT 50/EF can also be used with MICROMOT steel clampingdevices. This is recommended when milling continuouslyat high lateral pressure. This makes it impossible for theshafts to become loosened after prolonged working.Using clamping devices makes true running better than

using the quick-action chuck.

Slim, easily handled and light.

Quick-action chuck and electronic revolutionsadjustment, with feedback effect (high enginepower in the lower revolutions area). Special,balanced, low noise DC motor with high lifeexpectancy. A transformer is required for ope-ration. We recommend MICROMOT network devicesfrom 1.0A..

Technical data:

Direct voltage 12 – 18V. Power absorption upto 40W. 5,000 – 20,000/min. Length 220mm.Weight 230g.

NO 28 512

Superfine sander with linear (not rotary) sanding motion.

14

VOLT12

Ideal for working on surfaces in recesses, slots and small corners. Line-ar (not rotating) stroke. Long-lasting special DC motor. Housing of glass-fibrereinforced POLYAMIDE. Four sanding arbors with straight shanks and fourangled (all different shapes) as well as three sheets of pre-profiled self-adhe-sive sanding pads are included. The sheets are of grits 180, 240 and 400 with5 of each shape per sheet.Technical data:

Direct voltage 12 - 18V. 8,000 linear strokes/min.(2.5mm stroke length).Length 160mm. Weight 130g.NO 28 594

Additional sandpaper for PS 13Three sheets, each with 20 pads in different shapes. Silicon carbide, self-adhesive.NO 28 822 180 gritNO 28 824 240 gritNO 28 826 400 grit

Note:

A mains adaptor of at least 1.0A at 12-18VDC is required. We recommendPROXXON power supplies NG 2(E) or NG 5/E.

Jig saw STS 12/EIdeal for curved and intricate sawing of wood (up to 10mm), printed

circuit cards (up to 3mm) and non-ferrous metal (up to 2.5mm).

Powerful special low noise DC motor with high life expectancy. Variablespeed control with feedback effect (high engine powerin the lower revolutions area). Housing of glass-fibrereinforced POLYAMIDE.Includes 2 blades (coarse andfine). Can now also be used in combination with a balladaptor for working convex and concave surfaces. Werecommend the use of MICROMOT mains adaptors of atleast 2.0A.Technical data:

Direct voltage 12 – 18V. Maximum power absorption100W. Stroke 6mm (adjustable from 2,000 –5,000/min.). Length 180mm. Weight 480g.

NO 28 534

Orbital sander SL 12/EShaping, rough and fine sanding of flat surfaces and sides.

Flat sanding of primers and finish-polishing. Use on 12VDC (safety voltage) andlow speeds allow wet sanding! The easy to use paper clamp allows the use ofany commercial sand paper (no special curves required). Sanding area 80 x58mm has no overhanging parts, allowing sanding into corners. Housing ofglass-fibre reinforced POLYAMIDE. We recommend the use of MICROMOTmains adaptors of at least 2.0A.

Technical data:

Direct voltage 12 – 18V. Maximum power absorption 100W. Stroke 1,000 –5,000/min. Height 160mm. Weight 480g.NO 28 542

VOLT12

Jig saw blades can befound on page 7.

Pensander PS 13

Power and precision also when wet grinding. Includes keyless chuck (capacity 0.3 – 3.2mm).

15

For precision drilling, milling, sanding, polishing, brushing, de-rusting,

engraving, chiselling and cutting.

Includes keyless chuck (capacity 0.3 - 3.2mm). A precision ballbearing minimises spindle side play. Spindle lock button for bitchanging obviates the need for spanners. Recessed spindle head forinserting MICROMOT steel collets (see page 4). Special, balanced, low noise DC motor with high life expectancy.Variable speed control with feedback effect (high engine power inthe lower revolutions area). Housing of glass fibre-reinforced POLYA-MIDE.

Technical data:

Direct voltage 12 – 18V. Maximum power consumption 100W. Stroke3,000 - 15,000rpm. Length 185mm. Weight 450g.We recommended the use of MICROMOT transformers of at least2.0A (see page 17).

NO 28 462

With pre-selectable torques of 0.35 - 2.0Nm.

Small, light and easy to handle. An ideally positioned rocker switch provideson/off/reverse. A RÖHM chuck facilitates acceptance of all bit shanks of upto 6.5mm (also for standard 1/4" bits). Housing of glass fibre-reinforcedPOLYAMIDE. Complete with 16 inserts of chrome molybdenum steel.

Technical data:

Direct voltage 12 – 18V. Maximum power consumption 50W. Torques of0.35 - 1.0Nm (the sixth stage bypasses the clutch and yields approx. 2Nm).Length 200mm. Weight 415g. We recommend the use of MICROMOT mainsadaptors of at least 2.0A.NO 28 690

Efficient forced ventilation cooling for extendedperiods of use without power loss.

High-quality DC motorwith high torque.

20mm MICROMOT standard collar.

Speed control with feed-backeffect for speeds of 3,000 –15,000rpm.

VOLT12

Note:

The bit holder shown here (50 x 76 x 15mm – 2 pieces with-out bits), usable for holding rotating bits with shaft of Ø 2.35

– 3.0 and 3.2mm is available as No 28 359.

Precision drill grinder FBS 12/E

MICRO screwdriver MIS 1

Note:

The MICRO screwdriver MIS 1 is eminently suitable to cut threads!

Load balancer FZ 300

Load capacity 300 – 600g, cord length up to 180cm.Housed in a sheet steel case with plastic outer cover.Weight 400g. Ideal for assembly lines and work benches.

NO 28 699

Slot: 0,3 x 1,5 / 0,35 x 2,0 / 0,4 x 2,5 mm

Philips: Siye 0 and 1

Torx: T 6, T 8, T 10

Allen key, internal: 3,0 - 3,5 - 4,0 - 4,5 - 5,0 mm

Allen key, external: 1,5 - 2,0 and 2,5 mm

The ideal complete starter kit including the tried and testedengraving tool GG 12!

16

The UHV universal holder shown is described on page 19.

Complete engraving kit with ‘trial glass’

Engraving kit GG12 with special balanced, powerful, quiet and long-lasting DC

motor.

Housing of glass fibre-reinforced POLYAMIDE. Plus mains adaptor, trial glass, motifsand instruction booklet as well as all necessary bits: 1.0 and 1.8mm diamond grindingbits with spherical head for engraving and line work, silicon carbide grinding bits inboth conical and bullet shape for frosting glass as well as one corundum grinding bitin ball and cylinder shape for grinding and engraving. Every component is securelypacked in an attractive plastic case.

Technical data for GG 12:

Direct voltage 12 – 18V. Length 145mm. Weight 50g.NO 28 635

Engraving tool GG 12, available individuallyIncludes 1 diamond bit (spherical head, 1.8mm).NO 28 592

Aluminium precision handheld tool

with two steel ball bearings.

Ball bearing in the drive shaft end. Highlyflexible core (no heating up when benttightly).For holding steel MICROMOT collets.Length 100cm.

The flexishaft comes with 6 steel MICRO-MOT collets (1.0 – 1.5 – 2.0 – 2.4 – 3.0and 3.2mm).

NO 28 620

Flexishaft MICROMOT 110/P with triple ball bearings, up to 25,000rpm.

VOLT12

Every piece has its own place in the attractive, extremely stable plastic storage case.

17

MICROMOT mains adaptors: safe and efficient powersources for MICROMOT low-voltage tools.

NORYL casing (heat resistant – a necessity for transformer enclosures).

Polarised socket for MICROMOT plug. Red LED indicates readiness for use.PTC (Positive temperature coefficient) element prevents overload (andplugged in tool will not automatically restart). After cooling down. the mainsplug should be disconnected briefly to reset the adaptor. With holes for stor-ing bits. Foldable tool rest provides a secure place for keeping the MICRO-MOT tools at the ready. Variable speed control with feedback effect foradjusting bit speed to suit the job, as well as providing high torque at lowspeeds.

Technical data:

220 – 240V. Supplies 2.0A at 16 Volt open circuit and 12 Volt under load.Weight 1,000g. Class 2 insulation.NO 28 707

MICROMOT mains adaptor NG 2/SWithout electronic speed control, otherwise exactly as mains adaptorNG 2/E. NO 28 706

Note:

Power consumption of portable machine tools is measuredaccording to the internationally accepted ICE-745-1 specifi-cation. The current drawn is measured, not the power con-sumption with a hot motor just before stalling. In practice,this condition seldom appears, if ever. All PROXXON mainsadaptors are suitably dimensioned for the recommendedpurposes.

The adaptors do not include the illustrated drills/grinders.

With superior capacity of 5A. In compact NORYL casing (heat

resistant – recommended for transformers).

Variable speed control with feedback effect for optimum tool speed andhigh torque at low speeds. Three polarised sockets for MICROMOTmachines. A pair of sockets for standard banana plugs (4mm diameter)is also supplied. Master switch for turning off the transformer withoutneeding to unplug. Red LED indicates ‘ready’. PTC (Positive temperaturecoefficient) protection against overload (plugged in machine will notrestart automatically. After cooling down, the mains plug should brieflybe unplugged to reset the adapter). With storage holes for tools with2.35mm and 3mm shafts. Foldable tool rest for the MICROMOT tool.

Technical data:

220 – 240V. Supplies 5.0A at 16 Volt open circuit and 12 Volt underload. Weight 2,000g. Class 2 insulation.

NO 28 704

MICROMOT mains adaptor NG 2/E

MICROMOT mains adaptor NG 5/E

18

The KT 70, small and accurate.Ideal for drill stand MB 140/S and drill press TBM 220.

Precision vise FMZ with integrated clampRotates in all directions. Made of die-cast zinc. Easily clamps to work-benches and tables of up to 60mm. Alternatively, use 2 standard screws to secureto the work surface. Ball and socket: rotates in all directions (even downwards).75mm jaws with protective covers (for delicate workpieces). Maximum clampingwidth 70mm and weight 1.6kg.

NO 28 608

Precision vise FMS 75 As detailed above, but without clamp. A strong suction cup facilitatesinstantaneous fixing to any smooth, flat surface.

NO 28 602

Made of solid aluminium with surface treatment and fitted with adjustable

dovetail gibs and three T-slots of the MICROMOT standard (12 x 6 x 5mm).Adjustable ruler eases workpiece positioning. Both handwheels have zero-resettable dials with graduations indicating 1 revolution = 1.0mm and 1 division= 0.05mm. The clamps and securing bolts for the MB 140/S and TBM areincluded.Other technical data:

Table size 200 x 70mm. X travel 134mm and Y travel 46mm, maximum height43mm.NO 27 100

MICRO compound table KT 70 Step clamps made of steel

Table of 200 x 70mm with 3 T-slots.

Moveable ruler eases workpiece positioning.

Handwheels with adjustable dials (1 revolution = 1.0mm, 1 division = 0.05mm).

Two step clamps are included.

The step clamps set is supplied with the KT70, but can also be ordered separately. Setconsists of 2 stepped blocks and clamps, T-slot nuts of the MICROMOT standard (11.5 x11 x 4mm), bolts. This set also fits themill/lathe systems PD 230/E and PD 400.NO 24 256

The 120 x 220mm table is milled and fitted with a fence and scale. Thesolid column (280 x 20mm) is made of steel. The headstock is of die-castaluminium, offering a throat capacity of 140mm and 30mm travel. A chro-med feed lever operates via drive disc and ball bearing system, offering a

sensitive feed set-up.

Slotted guides and fits and pinch screwsallow simple height adjustment as well asthe fixing of the mill/drill units (20mm borefitting). The mill/drill collar, with scale, tiltsthrough 90° in both directions.

A depth stop as well as drilled, tappedholes for securing the MICRO compoundtable KT 70 and holes to fix the drill standitself are also provided.

NO 28 606

19

The MB 140/S offers fine feed via the drive disc and ball-bearing drive.

Universal holder UHZRotates in all directions. Made of die-cast zinc. Easily clamps to work-benches and tables of up to 60mm. Alternatively, use 2 standard screwsto secure to the work surface. Otherwise exactly as universal holder UHV.

NO 28 610

Universal holder UHVWith suction cap for rapid attachment on flat and smooth surfaces.

The ball joint may be swivelled in all directions. The 20mm bore acceptsall MICROMOT drills and grinders, e.g. FBS 240/E, IB/E, LB/E, MICROMOT 50, 50/E and 50/EF, FBS 12/E.

NO 28 603

Note:Our technicians prefer the use of die-cast aluminium as it isclean and stable. All fittings and feeds are machined on ourultra-modern CNC machines, i.e. milling, turning, etc. Pure precision!

MICROMOT drill stand MB 140/S

Machine vise MS 4

Die-cast zinc. With three machined sides. The slot fits the adjustable fenceof the drill stand MB 140/S and bench drill TBM 220.Horizontal and vertical V-slots in jaw. Jaw width 50mm and height 10mm.Maximum clamping width 34mm.

NO 28 132

20

Complete value for money kit for model-makers and DIY’ers.

MICRO-compressor MK 240The set is light, small and quiet. With adaptor and 200cm hose to connect tothe AB 100, as well as 2 paint containers.

The single action airbrush AB 100 is ideal for the beginner. Plastichand piece with adjustable nozzle.

MICRO-compressor MK 240,complete with airbrush AB 100

Technical data (compressor):

220 – 240V. 50/60Hz. 85W. Compressor capacity 12 l/minute, maximum pressureof 2.0bar. Dimensions: 140 x 120 x 95mm. Weight 1,300g. For airbrush purposesonly!NO 27 120

MICROFLAME burner MFB/E

Used for soldering, de-soldering, brazing, heating of workpieces, tinning.

Individually controllable gas and air supply. Super fine flame shape withtemperature attaining 1,300 °C. Ideal for precision work. Fitted with an elec-tronic piezo crystal lighter.

The tank contents of 50ml is sufficient forapproximately 120 minutes operation withnormal flame. Rechargeable with standardbutane cartridges used for lighters.NO 28 146

Note:

The airbrush AB 100 is exclusively foruse with acrylics.

Soldering tip EL 12. Easy to replace by loosening the clamping screw.NO 28 141

Soldering iron EL 12

Extremely short heating time of approx. 10 sec. PTC (positive temperaturecoefficient) technology ensures exact tip temperature of 310 °C. Ideal forworking on electronic components. Prevents damage to sensitive electroniccomponents such as transistors and ICs (with temperatures of over 350 °C).Lockable on/off switch. Light for illuminating workingarea. Operates off 12 - 14V DC. Complete with spiralcable and standard MICROMOT jack plug (from1.0A).

NO 28 140

VOLT12

21

Precision screwdriver for electronic engineers, camera builders,watchmakers, jewellers, precision mechanics and model makers.

MICRO screwdriversShafts of high alloy nickel-chrome-molybdenum (SAE 8660) for maximum hardness and toughness. Chromedwith brinelled tip. The ergonomically formed plastic handles are oil and impact resistant. The revolving topand finger mould improve ease of use.

NO 28 148 15 pieces in a stand

Slot: 1,0 x 40, 2,0 x 40, 3,0 x 40

Philips: PH 0-3 x 40, PH 0 x 40, PH 1-2 x 40

Torx: T 5 x 40, T 6 x 40, T 8 x 40, T 10 x 40, T 15 x 40

Allan key: 1,5 x 40, 2,0 x 40, 2,5 x 40, 3,0 x 40

Note:

It is important to use the MICRO screwdrivers with care and feel.The brute force associated with larger screwdrivers is best left forother tools. The revolving top and finger mould improve ease ofuse.

Quick and reliable gluing of metal, wood,plastic (including Plexiglass), glass, cera-mics, stoneware, cardboard, leather,polystyrene foams and textiles. The adhesive sets in about 2 minutes,allowing positional corrections (which isimpossible with instant glues).The 7mm glue sticks are perfect for deli-

cate work such as model build-ing, toy and jewellery making, dried flowerarrangements, etc. Sensitive mechanical feed ensures correct glue quantitydelivery. Integral stand positions gun on worktop when not in use. Shortheating time.

Technical data:

220 – 240V. PTC controlled element for exact temperature of 200 °C. Four gluesticks 7 x 100mm and 3 interchangeable metal nozzles are included in the set.

NO 28 192

MICROMOT glue gun HKP 220

Including 3 interchangeablemetal nozzles.Replacement glue sticks for HKP 220

For metal, wood, plastic, ceramics, cardboard, leather, polystyrene foamsand textiles. Ø 7mm. Length 100mm. Colourless.NO 28 194 12 pieces

Fixed place for each item in thepractical holder. May be used asdesktop stand or fixed to a wall.

22

Bits and cutters for MICROMOT drills and mills of industrial

NO 28 941

Three jaw keyless chuck

Used on all MICROMOT machines, excluding GG12, IB/E, LB/E and COLT 2. Capacity is 0.3 –3.2mm.

NO 28 940

MICROMOT steel collets Fits all MICROMOT handheld machines(excluding GG 12 and COLT 2). One of each 1.0 - 1.5 - 2.0 - 2.4 - 3.0and 3.2mm, closure nut and holder are included. See also the note onpage 4.

0,5 1,00,8

44 44 4466 8

NO 28 864 NO 28 852 NO 28 854

HSS drill bits HSS drill bits. Selected steel quality. Purpose-made one-piece blank. High hardness for optimum life expectancy and Work speeds: soft materials approx. 8,000rpm, hard materials

MICROMOT keyless chuck and collets HSS drill bits

Milling bits

5,05,06,0 6,0 4,010,0

3,08,0

NO 28 722 NO 28 727 NO 28 725 NO 28 724 NO 28 723 NO 28 726 NO 28 720

Wolfram vanadium steel milling bits Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling and slotting. use of MICROMOT steel collets as described above.

6,02,35 2,353,03,0 2,352,35 2,35

5,0

3

1,0 1,5 2,01,0 u. 1,2 0,6 u. 0,8

38 38

30 30

388 8 8

3

NO 28 324 NO 28 326 NO 28 328

Tungsten carbide drills Made of wear-resistant tungsten carbide. For drilling glass, semipreciousstones, porcelain, ceramics, marble and other hard stones. The hard stones are subdivided according tothe degree of hardness from 1 - 10. Tungsten carbide can be used up to hardness degree 6, Drillinghard stones with a hardness degree of more than 6 calls for the use of diamond tools. Shaft Ø 3.0mm.With ideal cutting angle of 6°.

NO 28 750

Tungsten carbide millers

Made of wear-resistant avoiding accidents. milling of PC cards.

NO 28 320 NO 28 321

Tungsten carbide milling drills (spear drills)

For drilling, milling and cutting fibre glass or PERTINAXcircuit boards. Also for drilling pearls and similar. ShaftØ 2.35mm.

Tungsten carbide drills and milling bits

5,0

2,3 2,32,32,3

5,0

2,35

2,5 6,07,0 5,0

Grinding bits

5 p. 5 p. 5 p. 5 p. 3 p. 3 p. 3 p.

2,5

2,35

7,0 6,0 5,0

8,0 9,0 13

13

3,0

NO 28 774 NO 28 778 NO 28 776 NO 28 772 NO 28 770 NO 28 781 NO 28 782 NO 28 783 NO 28 780

High quality corundum grinding bits. Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chi-selling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3.0mm ensure maximumconcentricity. Grinding rule: soft materials = hard grinding bits; hard materials = soft grinding bits!

23

and dental quality.

1,2 1,6 2,1

44 44 448 10 10

NO 28 856 NO 28 858 NO 28 862

stable construction with high concentricity. Shaft and bit are manufactured from aelasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood.

approx. 3,000rpm. Ø shanks 2.35mm.

l 1

l 2

d 1

NO 28 874

HSS twist drill set to DIN 338 One eachof 0.3-0. -0.8-1.0-1.2-1.5-2.0-2.5-3.0-3.2mm diameter. For drilling non-ferrousmetals, steel, high-quality steel. 10 pieces.

NO 28 876

HSS twist drill set with centring pin Ø 1.5-2.0-2.5-3.0 - 3.5 -4.0mm. For precision tapping of wood and plastic. The titaniumcoating reduces friction and increases life expectancy. Ø shanks0.3mm. 6 pieces.

2,3 2,33,12,3

NO 28 710

ensure best life expectancy. Ideal for free-hand precision work. For clean and powerful fitting of the milling bits we recommend the

2,3

NO 28 255

Diamond twist drills

For drilling holes in (semi)precious stones, etc. Shaft Ø 2.35mm.

0,8 u. 1,2

44

51,8

5,0

5,0 d 1 d 11,8 5,0 1,0 1,8

5,0

NO 28 240 NO 28 250 NO 28 212 NO 28 222

Diamond grinding bits With consistently even coating of diamond dust. Bodiesand shafts made from stainless steel. Used for grinding, engraving and chisellingsteel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. Allshafts Ø 2.35mm.

Diamond tools

NO 28 752 NO 28 758 NO 28 759 NO 28 761 NO 28 760

highly compressed fine-granular tungsten. Used for vibration-free milling of high accuracy dimensions. It is advisable to secu-re workpieces well, For milling steel, cast steel, non-ferrous metals, plastics and extremely hard materials. May be used for technical work, for engraving and Shafts Ø 3.0 or 2.35mm. Here also we recommend the use of MICROMOT steel collets.

NO 28 757

Rasp cutter

For cutting and milling tiles, stone-ware, wood and plastics. Sparecutter for FEX.

1,2

4,0

2,1

2,32,3

2,1

1,2

4,0

2,35

l 2

l 1

d 1

44

3,0

12

1 p.

1,0

l 2

l 1

d 1

44

3,0

12

2,0

l 2

l 1

d 1

44

3,0

12

3,0

1 p. 1 p.

5,05,0

3,2

1 p. 1 p.

8,02,0

8,0

7 5

2,5 2,5

NO 28 270 NO 28 272

Silicon carbide grinding bits Fine particles of consistent hardness forengraving and frosting of glass, ceramics and stellites. Also for grindingtungsten carbide, chilled cast iron and other hard steel alloys. Shafts Ø2.35mm.

NO 28 815

Spare arbors

Shaft 2.35 x 44mm.

22

3

22

3 44

10 p. 10 p. 5 p.

NO 28 302 NO 28 304

High quality corundum and silicon carbide grinding wheel

Wheels for free-hand and stationary grinding, sharpening, de-burring andsmoothening of various metals and materials.

Note:

All measures are in mm.d 1

28

3,0

50

3,2

22

50

2,35

24

Selected cutting, sanding and polishing bits for professional useHolders for storage of bits and cutters

NO 28 359

Small holders Two tablets 50 x 76 x 15mm for clean storage of bits and cut-ters such as drills, grinding bits, brushes and other tools with shafts of Ø 2.35,3.0 and 3.2mm (the last mentioned shaft corresponds to a 1.8” shaft). Inserttools not included.

8 7 16

15 15

3

NO 28 801 NO 28 802 NO 28 803 NO 28 800 NO 28 798

Felt polishers and felt discs Various forms and profiles for multifunctional use. For pre- or high-polishingand aluminium when using the polishing paste. Also suitable for mould construction and tool 2.35mm. When polishing always work at a low rotational speed to prevent the burning of materials and or slightly warm up hard polishing paste containing oil.

2 p. 2 p. 2 p.

High-polishing

10 p.

22

Cleaning, polishing8

13 13

5 p. 2 p.2 p.2 p.2 p.

NO 28 951 NO 28 953 NO 28 952

Steel brushes, cups and wheels High quality components for best operation. For cleaning,removing rust, sanding, frosting, roughening, rounding-off, etc. of metal, cast iron, plastic,stone and wood. Shaft of Ø 2.35mm.

NO 28 961 NO 28 963 NO 28 962

Brass brushes, cups and wheels Ideal for working on brass, brass alloys, copper, preciousmetals, semiprecious stones, plastic and wood. For cleaning of electronic components andcircuit boards. Shaft of Ø 2.35mm.

Sanding

5 p. grit 1205 p. grit 150

10 p. grit 12010 p. grit 150

ø 18 ø 18

NO 28 982 NO 28 983 NO 28 987 NO 28 989 NO 28 980

Sanding discs, caps and bands made of standard corundum. The compounds are of tough consistency and different grits for different sanding stages. Shafts of Ø 3.0mm. Extremely sanding. Steel high, wood medium and plastic low rotational speed. For sanding, smoothening and polishing malleable cast iron, grey cast iron, high quality steel, non-ferrous metals, woodused,

22

1,8

38

1,8

Cutting discs

10 p. 5 p.50 p.

1,8

22 22

1,81,8

22

NO 28 810 NO 28 812 NO 28 820

Corundum cutting discs

Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels and non-ferrousmetals. Can also be used for cutting wood and plastic. Shaft of Ø 2.35mm.

NO 28 808 NO 28 809

Aluminium oxide cutting discs with reinforcement

The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm.stock. Will cut alloyed, standard and stainless steels, non-ferrous plastic. Arbor shaft of Ø 2.35mm.

38

10 p. 50 p.

381,8

13

5 p. grit 805 p. grit 150

9 9

5 p. grit 805 p. grit 150

13

10 p.grit 150

10

10

8

5 p.

22

25

and longest life expectancy!

22 22 22

NO 28 297 NO 28 298 NO 28 299 NO 28 291

Cotton, leather and felt polishers

For high gloss finishes on metal, gold, silver, non--ferrous metals, brass, aluminium, ceramics and porcelain whenusing polishing paste. Can also be used on lacquered wood and plastics. Shafts of Ø 2.35mm. High-gloss Frenchpolish needs several operating cycles at medium rotational speed.

metal, gold, silver, brass manufacture. Shafts of Ø tools. Also always soften

2 p. 2 p. 2 p.

NO 28 292

Polishing paste

Essential for polishing metal andplastic.

22 22

10 p. 5 p. 4 p.

14

123

6

5

15

NO 28 293 NO 28 294 NO 28 288

Flexible silicon discs, wheels and bullets

Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubberand plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.

NO 28 295 NO 28 296

Flexible polishing pad set Especially suitable forworking gold, platinum, silver as well as for tool makingand castings. Shafts of Ø 2.35mm.

NO 28 981 NO 28 978 NO 28 979

strong. Different forms for different areas of application. Must be adjusted to the material that needsand plastic. Also for sanding edges. The rotational speed at which the sanding discs and caps are

NO 28 830

Cutting blades made of spring steel

0.1mm thick. For plastic, wood and non-ferrous metals. Shaft of Ø 2.35mm.

NO 28 840 NO 28 842

Diamond cutting disc

Only 0.6mm thick. For cutting and sanding of porcelain, ceramics, glass fibreboards, plastic and non-ferrous metals. Shaft of Ø 2.35mm.

16

2019

221,8

1,8

1,8

NO 28 818

Nearly unbreakable, making them usable to remove metals and even wood and

38

38

1,8

38

5 p.

38

1,8

10

10 p.grit 150

10

10 p.grit 120

13

14

10 p.grit 120

13

14

NO 28 282

Nylon fleece brushes Used forcleaning, frosting and sandingsteel, high quality steel, non-fer-rous metals, etc. Shaft of Ø2.35mm.

20 20

grit 120 grit 120

20

10

30

10

NO 28 984 NO 28 985

Flapwheels. These flapwheels are elastic andtake on the shape of the workpiece. Ideal forsanding in inaccessible spots. Shaft of Ø 3.0mm.

Note:

All measures are in mm.

22

10 p.

3

Fine polishing

26

Selected sets for various applications.

Nine piece set

For drilling, milling and cutting of circuit boards. Contents: 3 microdrills in Ø sizes 0.5, 0.8 and 1.0mm, 2 milling bits ball shape Øsizes 0.5 and 2.3mm, 3 cutting discs Ø 22mm with arbor. All shaftsof Ø 2.35mm. NO 28 930

Seven piece set for working jewellery

For jewellers and goldsmiths. Contents: 3 ball milling bits with hole (for mil-ling fittings for pearls etc.) in Ø sizes 3, 4 and 5mm. 1 double cone miller formilling bases for stones with 1.4mm diameter. 1.0 and 1.4mm millers withconcave heads (for rounding off wires etc.). 1.0mm hardened spear drillmade of tungsten carbide for pearls and stones included. All shafts Ø2.35mm.NO 28 911

13 piece set for model makers

For cutting, milling, polishing and drilling. Contents: 1 fine milling bit eachball shape and cylinder 2.3mm, 1 corundum grinding bit each ball andcone shape 5.0mm. 1 micro drill each 1.0 and 2.3mm. 5 cutting discs Ø22mm, 1 saw blade Ø 22mm and 1 arbor Ø 2.35mm.

NO 28 910

Complete 10 piece polishing set

For polishing metal, glass, high quality metal, porcelain and pla-stic. Con-sists of 3 felt polishing bits (cylinder, cone, wheel), 3 silicon polishing bits(bullet, cylinder and wheel). Cotton wool polishing wheel; chamois buffingwheel and polishing paste (incl. of 2.35mm arbor).

NO 28 285

Four piece set consisting of:

2 diamond grinding bits and 2 silicon carbide grinding bits. Forengraving, grinding and frosting glass. Diamond bit 1: ball Ø1.0mm, diamond bit 2: ball Ø 1.8mm. Silicon carbide bit cone 3/2 x5mm and cylinder 2/2.5 x 7mm. All shafts of Ø 2.35mm.NO 28 920

Glass working Electronic technician set

Jewellery set Modeller's set

Complete polishing set

Ball nose cylinder 7.5 x 12mmNO 29 060

Flame 8 x 12mmNO 29 062

Taper 4 x 19mmNO 29 064

Great for sculpting, cleaning and smoothening of wood and fibre glass.

For precision working on and refining of flutes, grooves and furrows. Extre-mely sharp and very easy to handle: the material can be worked without phy-sical effort no matter whether it is cut with or against the grain. High stabilityand easy to clean with a Bunsen burner. Also for use on rubber, foam andsilicone. RPM: 5,000 – 20,000. Shaft Ø 3.2mm. Do not use on metal!!!

Tile cutting attachment FEX

Ideal for small cuts in wall tiles, wood and dry wall.

drill/grinder FBS 240/E, the MICROMOT 50, 50/E and 50/EF or the professional drill/grinder IB/E. Made ofglass-fibre reinforced POLYAMIDE. With depth adjustment and scale. With the 20mm standard fit, ittakes only seconds to screw the FEX to the precision .

NO 28 756 Complete with 3.2mm rasp cutter of tungsten carbide

Spare cutter for tile cutting attachment FEXMade of tungsten carbide. With 3,2mm shaft. Ideal for wall tiles.NO 28 757

New for woodworking: rasp cutter with wolfram carbide burrs.

Note:

The depicted rotarytool is not included.

Note:

Ideal for wood cutters: rasp disc made of the same material in combination with the MICROMOT long neck angle grinder LWS. See page 6.

Facilitates working in otherwise difficult areas.

May also be used for parting metal profiles such as model railroadtracks and as angle grinder. With 20mm MICROMOT collar andextra collets and adaptor (that fits all MICROMOT tools with 20mm spindle neck). Transmission ratio 1:1. Four ball bearing drive. Housing of glass-fibre reinfoced POLYAMIDE.NO 28 405

27

10 piece wood router cutter set

A set with one each of the described cutters neatly arranged in awooden box.

NO 29 020

Used in the manufacture of picture frames, for slotting, cutting radiiand other profiles. Shaft Ø 3.2mm.

Attention!

These router cutters should only be used in machines or accesso-ries with safety mechanism such as the MICRO router MOF (page11) or the MICRO shaper MT 300 (page 37).

Tungsten carbide wood router cutters, inverse relief ground for cleaner cuts

MICROMOT quick change grinding system

Angle adapter WS 90

Slot cutter ø 3,2mm NO 29 024

Slot cutter ø 5,0mm NO 29 026

Slot cutter ø 6,5mm NO 29 028

Rounding over cutter ø 6,4mm NO 29 030

V-slot cutter ø 6,5mmNO 29 032

Combi cutter 6,5/2,5mmNO 29 034

Core box bit R 3,2mmNO 29 036

Rebating cutter 6,4mm

NO 29 038

Edge cutter with pin 5,0mm

NO 29 040

Half round cutter ø 13mm NO 29 042

Quick change by turningthe blocked shaft slightly

to the left.

With adaptor (that fits to the angle milling/drilling unit WB220/E, the professional drill/grinder IB/E, the long neckstraight drill/grinder LB/E, the precision drill/grinder FBS240/E and FBS 12/E and to the mill/drill units MM50, MM50/E and MM 50/EF), three aluminium oxide discs for work-ing steel (grit 40, 80 and 180), three zirconium-corundum

discs for working high-quality and high-alloy steel (grit 50, 80 and 120),three grinding fleeces for cleaning, finishing and removing of annealingcolours (coarse, fine, very fine).

NO 28 785 Complete set

The discs with different grit are easy to change and can be used several

times.

Aluminium oxide for steelNO 28 786 grit 40 5 pieces NO 28 787 grit 80 5 pieces NO 28 788 grit 180 5 pieces

Zirconium-corundum for high-alloy steeland high-quality steelNO 28 789 grit 50 5 pieces NO 28 790 grit 80 5 pieces NO 28 791 grit 120 5 pieces

Grinding fleece for cleaning and finishingNO 28 792 coarse 5 pieces NO 28 793 fine 5 pieces NO 28 794 very fine 5 pieces

Spare grinding discs (Ø 25mm)

Technical data:

Centre distance of 250mm, 40mm swing. 25mm swing over support. Motor220 – 240V, 150W, 50/60Hz. Variable speed control covering between1,000 and 5,000rpm. Headstock spindle bore of 10mm. Tail-stock travel20mm.Includes 6 collets (2 – 3 – 4 – 6 – 8 – 10mm), drive centre, live centre andface plate.NO 27 020

28

Centre distance 250mm and 40mm swing. Variable speed control covering 1,000 – 5,000rpm.

MICRO woodturning lathe DB 250

Turning in miniature is a pleasing hobby. One canmake glasses, cups, saucers, vases and columns for a doll house. In model trains, one can make lighting

masts, windows, tanks. Limbs for marionettes andhundreds of classical miniature turning tasks may becarried out with ease.

Work pieces are secured by meansof collets (1 each of 2 – 3 – 4 – 6 - 8 and

10mm are included).

The bed is made from stable,thick-walled aluminium profile.

The stable tool rest is adjustable in all directions.

Tailstock with quill travel.

Powerful drive motor with speed con-trol between 1,000 and 5,000rpm.

Ball bearing spindle is bored through at 10mm.

For series production of small parts.

Square carrier with back centre and10mm shaft.

Five piece HSS chisel setHighest quality set with the most frequently used chisels:tube chisel, flat chisel, pointed chisel, anvil chisel andfinishing chisel. Neatly packed in a wooden box.NO 27 023

Independent four jaw chuck for the DB 250With individually adjustable jaws. Used to clamp asymmetrical pie-ces such as rectangles. The reversible jaws clamp from 1.5 – 35mm(inside) and from 14 - 67mm (outside). The DB 250 headstock spindleof thread M16 x 1 screws directly into the chuck.NO 27 024

Three jaw chuck for the lathe DB 250Used for concentric clamping. Made from die-cast zinc and offering1.5 to 32mm and 12 to 65mm when reversing the jaws. The chuck hasa M16 x 1 thread for fitting directly to the DB 250 headstock spindle.NO 27 026

A face plate for turning larger items is included.

Drill chuck with sliding sleeve for thetailstock of the DB 250Clamps up to 5.0mm. Is inserted on the spot of the rotating back centre. The feed movementresults from sliding the complete tailstock.NO 27 028

The electronic speed control assists in the lower range in a ‘semi-automated’painting process.

29

Used to cut styrofoam and thermoplastic materials, both freehand and with stencils.

Hot wire cutter THERMOCUT

Note:

Styrofoam is a cheap material compared toothers and does not harm the environment.It is easily available in art, craft, hobby and

similar shops.

Note:

The unit's double wound transformer and insulation to class 2 ensure the cutter isabsolutely safe. The cutting wire operates at 10V, 1A.The large base with 390 x 280mm table with surface of aluminium cobond compoundensures smooth and easy movement of the workpiece. The printed grid and protractorease division and cutting. The solid aluminium overarm has a 350mm throat andoffers 140mm capacity in height. The holder and wire coil (30m, 0.2mm diameter isincluded) may be shifted along the overarm to enable mitre cutting. A LED indicatesoperation and prevents burnt fingers (the cutting wire heats to maximum in less than1 second).

Note:

The correct temperature, being material type and thickness dependent, is easilylearnt. Optimum profiles are cut at lower temperatures and cuttingforce.

Other technical data:

220 – 240V, 50/60Hz. Transformer secondary max. 10V, 1A. Cutting wire temperature with0.2mm diameter is variable between approx. 100 and 200 °C. Weight approx. 3kg. Insula-ted to class 2 requirements.

NO 27 080

Spare cutting wire

Used on the THERMOCUT and other similar units. Made of NiCr 8020. Spool of 30m x0.2mm.NO 28 080

Ideal for architectural models, designers, decorators, artists, teaching too, prototypes aswell as classical railroad, plane and boat model building.

Crosscuts are achieved by means of a simple yet efficient solu-tion: secure drawing-pin to table by means of tape, it serves as

a fixed centre.

Double function fence with lockable feed bar(German Patent 100 00 102.5).

The working surface is of aluminium cobondcompound. This eases the pushing of work pie-ces. A printed grid and protractor are applied tothe base.

30

For perfect straight cuts in wood, non-ferrous metals, plastic and PC cards.

Bench circular saw KS 230

Machined, die-cast aluminium table of 160 x 160mm.

Super-cut blade 58mm diameter,80 teeth, individually set and shar-

pened, is included.

Quiet, high performance VDE approvedmotor for prolonged use.

Graduated mitre stop.

Base of ABS with a sawdust door onthe right.

Adjustable fence with scale.

The 58mm diameter super-cut blade cuts soft woods up to 8mm.

The 85W VDE tested motor is quiet, operates off 220 - 240V and has a pro-longed life expectancy. Cutting performance: in wood up to 8mm, plas-tics(Pertinax too) to approx. 3mm, non-ferrous metals to approx. 1.5mm. Evenfibreglass reinforced PC cards could be cut with the tungsten blade. Theside door allows easy sawdust removal. Overall size approx. 240 x 180 x80mm. Weight approx. 1.8kg.

NO 27 006

Important!

Power transmission by toothed belt via ball bearings, housed in sturdycasing, ensures the right blade speed for the job (approx. 5,000rpm) with adoubling of torque (approx.). Above all, it ensures good cutting depth.

Note:

The larger version of the circular saw KS 230 (model FKS/E) is described on page 38.

Very important when sawing: use our vacuum clea-ner adaptor for a cleaner work environment.

Crosscut ‘super-cut’ blade58mm diameter (10mm bore). 80 alternately set teeth. Idealfor hard and soft wood as well as plastic and Pertinax. Forfast, clean cuts. Teeth are individually set and sharpened.Superior cutting power! NO 28 014

Solid carbide saw blade 50mm diameter (10mm bore) 0.5mm thick. Fine toothed: idealfor cutting fibreglass sheets up to 3mm, non-ferrous metals,duro-plastics and other ‘difficult’ materials.NO 28 011

HSS saw blade 50mm diameter (10 mm bore), fine teeth. Designed for pre-cision cutting.

NO 28 020

Tungsten tipped saw blades 50mm ø x 1.1mm (10mm bore).10 teeth. Used to cut hardand soft woods, PC cards, PERTINAX and aluminium.

NO 28 016

50mm Ø x 1,1mm (10mm bore). 20 teeth. For extremelyclean cuts of balsa, plywood. Can also be used for cutting PCcards and POLYCARBONATE.NO 28 017

Diamond blade. 50mm diameter (10mm bore).With 0,5mm layer of class ‘D107’ diamond for cuttingceramics, as well as fibreglass sheets. Total thickness0.7mm.NO 28 012

The ideal machine for that delicate project: model building,

toy making and precision work.

Cuts soft wood up to 40mm, hard wood up to approx. 10mm, plastic (includ-ing PC cards) up to approx. 4mm and non-ferrous metals up to 2mm. Verystable ribbed die-cast aluminium saw frame with 300mm throat. Bladeguide with integrated blower. Height adjustable head (3 positions) offeringtwo advantages:

– Blade usage is improved as thehead may be lowered in two steps,making new blade teeth available.This effectively triples blade life.

– The lowest head position still allows blades, shortened by60mm, to be used.Machined worktable of die-cast aluminium, 160 x160mm. ABS plastic body with side sliding panel for

removal of saw dust. VDE approved 220 – 240V motor (85W) for pro-longed,low noise performance. Quiet, wear-resistant toothed belt drive running in aball bearing. Electronically controllable stroke rate from approx. 150 –2,500/min. Adjustable mitre fence and stop with scale.

NO 27 088

31

Cuts aluminium, wood, PC cards and plastics with standardfret saw blades. With electronically controllable stroke rate.

Scroll saw DS 230/E

Note:

Please also see the scroll saw DSH/E (page 36). The new blade clamping system enables the use of

the saw blades (without pin) described below.

Use the vacuum cleaner adaptor to keepyour work area cleaner.

Adjustable head (patent EP 09783341) offersmany advantages (see description below).DM/040788.

Super-Cut scroll saw blades

High quality steel for extended use and prolonged cutting capacity in hardand soft woods, plastic, Perspex and soft non-ferrous metal. Standard ver-

sion (without pin).

Hard and soft woods, plastic, Perspex and soft non-ferrous

metal.

Coarse-toothed blades (14 teeth per 25mm): NO 28 110 130 x 1.50 x 0.48mm 6 pieces

Standard-toothed blades (17 teeth per 25mm):NO 28 108 130 x 1.20 x 0.38 mm 6 pieces

Fine-toothed blades (25 teeth per 25mm):NO 28 107 130 x 0,77 x 0.30 mm 6 pieces

Hard materials such as steel and PERTINAX.

Fine-toothed blades (28 teeth per 25mm):NO 28 104 130 x 1.10 x 0.50 mm 6 pieces

Very fine-toothed blades (41 teeth per 25mm):NO 28 106 130 x 0.74 x 0.36 mm 6 pieces

Polishing set Steel wire brush for de-rusting and cleaningsteel and non-ferrous metals. Brass wirebrush to polish non-ferrous metals and pre-cious metals. Felt wheel is used on paintedsurfaces and the chamois and cotton wheelsprovide a high gloss finish on non-ferrous metals and precious metals.NO 28 312 Complete set

Spare discs for the SP/E and BSG 220 (50 x 13mm)Corundum (grade N) with 12.7mm boreNO 28 308

Silicon carbide with 12.7mm bore. Soft compound for very hard materials. NO 28 310

32

For 50mm discs and brushes. With electronic speed control from 8 to 24m/sec.

Table moveable through 45°, allowing mitre cuts.Workpiece is fastened tightly and accurately bymeans of the integrated clamping device. Clampjaws 27mm wide and maximum workpiece dia-meter 20mm. Depth of cut to 13mm. A specialslot is provided to clamp HO model tracks. The fence accepts lengths up to 140mm. Fiveceramic cutting discs 50 x 1.0 x 10mm are alsoincluded suitable for cutting steel, non-ferrous metals as well as wooden orplastic rods.Technical Data: 220 – 240V. 85W. 50/60Hz. Peripheral speed 20m/sec.Weight approx. 1.5kg.NO 27 150

Replacement cutting discsMade of ceramic compound: 50% aluminium oxide and 50% silicon carbide.Suitable for cutting steel, non-ferrous metal as well as small wood and ceramicbars.NO 28 152

The slim housing facilitates the grinding of long workpieces and

includes an adapter to connect a vacuum cleaner to the unit.

The tool rests and eye guards are both adjustable. A spindle lock eases thechanging of wheels and discs. Supplied with a 50 x 13mm corundum (gradeN) and silicon carbide (soft compound) wheel for general grinding/sharpe-ning and hard materials respectively. The right hand spindle accepts the

polishing arbor, which is supplied asstandard equipment.Technical data:

220 - 240 V. 3,000 - 9,000rpm. Wheels50 x 13 x 12.7mm. Grinding speed 8 -24m/sec. Weight approx. 1,200g. Sizeapprox. 250 x 130 x 100mm.NO 28 030

The dust collector and vacuum cleaneradaptor can be used.

Grinding and polishing machine SP/E

Cut off saw KG 50Accurately cuts small items of metal, wood and plastic.

The sharpening operation is controlled exactly by means of the

movable carriage.

This moves from left to right and alsorotates the drill bit on its own axis. Thisoperation yields the correct relief angle.The carriage is fitted with a feed screwfor fine feed. A dressing stone, ensuringa sharp cutting surface, is also fitted.Other technical data:

Corundum grinding disc size 50 x 13mm. 220 -240V, 85W. ABS housing withfixing holes. Weight 1.7kg. An easy to understand operating manual andreplacement disc accompany the unit. For further spare discs see page 32.NO 21 200

33

Easy sharpening of drill bits from 3 to 13mm diameter, standard angle of 118°.

Vacuum cleaner controller AS/ESwitches your dust extractor or vacuum cleaner on and off.The controller supplies the power tool (either portable or stationary) andvacuum cleaner with power. It switches on the vacuum cleaner while thepower tool is operational. Once the power tool is switched off, a 3 secondrun-down period ensures the workplace is properly vacuumed. Additional

Tip:

Using a wooden block can easily position your extraction to where you are

working.

switch positions switch the vacuum cleaner on or off perma-nently. Usablewith power tools of 25 - 500W and vacuum cleaners of up to 1,500W.NO 27 032

Adaptors for sharpening of small drill bits

These adapters extend the BSG 220’srange to cover 1.5 - 3mm. One eachadapter for sizes 1.5 - 1.6 - 2.0 - 2.4 -2.5 and 3.0mm. Neatly packed in a woo-den box with sliding lid.

NO 21 232

Note:

The Proxxon Drill Sharpener comes complete with full instructions to ensureeven a novice can sharpen drill bits. These instructions will help get goodresults every time.

Drill sharpener BSG 220

34

For precision work: even 0.5mm holes may be drilled. With three step pulleys for easy speed change.

Bench drill machine TBM 220

Note:

The optional MICRO compound tableto shown is described on page 18.

Fully adjustable depth gauge.

Machine vice MS 4 made of die-cast zinc isan invaluable accessory and is described in detail on page 19.

Machined worktop of high quality, ribbed die-cast aluminium (220 x

120mm). Adjustable fence with scale. Solid, hard-chromed steel column,340mm high, 20mm diameter. Super stable die-cast head with VDEapproved 220 - 240V motor. Very quiet and of long life expectancy type.Power transmission by aluminium pulleys and flat belt. Three spindle speeds(triple torque at low speeds). Feed lever with adjustable depth scale.

Technical data:

220 – 240V 85W. 50 – 60Hz. Spindle speeds of 1,800, 4,700 and 8,500rpm. Extremely high rotational accuracy, 30mm feed. Throat depth (columnto drill spindle) 140mm. Six triple slit precision collets for shaft sizes 1.0 –1.5 – 2.0 – 2.4 – 3.0 – 3.2mm are included. 3/8” thread. Weight 3.3kg.NO 28 128

RÖHM-ChuckFor drill shank sizes 0.5 to 6.0mm. Max. speed 10,000rpm. Industrial qualitywith extra high speed accuracy. With 3/8" thread for MICROMOT bench drillTBM 220.

NO 28 122

Dividing head for MICRO miller MF 70 andMICRO compound table KT 70

This accessory is used to drill off-set holes, holes with equal spacingas well as milling key surfaces in 4sided, 6 sided, etc materials.Graduated on the base. Thechuck jaws may be reversed toyield 1.5 - 32mm (inside) and 12– 65mm (outside) and bore of11mm. This through hole allowslong items to be clamped verti-cally in the chuck. Mountingholes to secure the unit vertically or horizontally are provided. T-nuts, comply-ing with the MICROMOT norm, as well as mounting screws are included formounting on the MICRO miller MF 70 and MICRO compound table KT 70.Size 72 x 64 x 38mm. Supplied in wooden box with sliding lid.

NO 24 264

35

Small and beautiful: the accurate miller for lab technicians, optician, jeweller, electronic/model builder.

MICRO miller MF 70

Tungsten milling cutters

Two flute cutters and a fishtail pro-file ensure cutting to the centre, allow-ing boring. Usable on grey castiron, hardened cast iron, steel, caststeel, brass, aluminium, glass eneven plastics and car-bon fibre. Oneeach of 1.0 – 2.0 and 3.0mm.3.0mm shaft diameter. Can alsobe ordered separately.

NO 27 116 3 pieces

Base of grey cast iron. Including both vertical column and compound tableof treated, quality aluminium. All axes are play-free and have adjustable gibs.Headstock of die-cast aluminium contains the 24 pole special (balanced)motor is super stable even at high operating speeds. This stability facilitatesthe use of the finest cutters. The triple slit, hardened steel MICROMOT col-lets cover 1.0 – 1.5 – 2.0 – 2.35 – 3.0 – 3.2mm. The table is fitted with 3T-slots of the 12 x 6 x 5mm MICROMOT norm. An adjustable ruler scaleeases the positioning of the workpiece. All handwheels are zero adjustablewith 1 revolution = 1.0mm, 1 division = 0.05mm.

Technical data:

220 - 240V, 100W, 50/60Hz. Spindle speeds 5,000 - 20,000rpm. Table 200x 70mm with X- Y travel of 134 and 46mm respectively, with vertical travel80mm. Footprint size 130 x 225mm and overall height 370mm. Weightapprox. 7kg. The clamping blocks depicted are included too, but not theworkpiece!

NO 27 110

Continuously variablespeed from 5,000 –

20,000rpm, perfect foreven the smallest mil-

ling cutter.

Stable cast iron base.

Handwheels with zero adjustable scales, 1 revolution = 1.0mm, 1 division = 0.05mm.

Table of stable aluminium. Both axes are fit-ted with adjustable dovetail slides.

Now supplied complete with stepped clamp blocks ofsteel. These are shown on page 18 (offered separately).

Cutter clampingin MICROMOT system

collets.

MICROMOT steel collets, triple slitand hardened, from 1.0 to 3.2mm.

Precision steel vise PM 40

Milled from Steel for precision. Complete-

ly angular.

Jaw width 46mm, clamping capacity 34mm.Total length 70mm. Especially suited for fili-gree and accurate working with the MICROmiller MF 70 or the compound table KT 70.Sliding blocks and fixing screws included.Comes in a wooden box.

NO 24 260

For work with extremely small cutters.

2-speed scroll saw DSH

Technology, range, cutting power and other properties as described on theleft for the DSH/E, but without continuous number of strokes adjustment andwithout a quick action saw blade arrangement (chuck lever, T-screw) on theoverarm. A somewhat narrower table (360 x 180mm, instead of 360 x270mm).Technical data:

220 – 240 V. Powerful brushless 2-speed motor (205 W), stroke 990 or1,500/minute, to choice. Stroke 19mm. 400mm throat with 50mm maxi-mum depth of cut or 25mm at 45° table tilt. Length 53cm, height 30cm,width 27cm. Weight approx. 20kg.NO 28 092

Super-quiet! With electronic speed control from 200 – 1,400strokes per minute. Smooth cuts without the need to finish.

Simple quick release lever forquick blade changes (essential

when cutting internally).

Super cutting capacity (wood 50mm, plastics 30mm, non-ferrous metals10mm) and yet runs with only a hum. Perspex, PCcards, foam, rubber, leather and cork are easilycut.Free moving blade chucks accept both pin andplain end blades. The slender overarm facilitates aclear view of the workpiece. The photo (fig. 1)shows the superb quick change lever, used espe-cially with internal cuts.Air blower with adjustable nozzle provides clearvisibility of workpiece and cutting line. Machinebase of cast iron with rubber feet for vibration-free

operation and stability, may also be screwed down. The sturdy table 360 x270mm tilts up to 45° for mitre sawing (fig. 2). Channel for the connectionof a vacuum cleaner. Complete with 5each coarse and fine blades.

Other technical data:

220 - 240V. 50/60Hz. The special motordraws 200W and the electronic speedcontrol yields constant speeds under loadfrom 200 to 1,400/min. Stroke 19mm.400mm throat with 50mm maximumdepth of cut or 25mm at 45° table tilt.Length 53cm, height 30cm, width 27cm. Weight approx. 20kg.

NO 27 090

The DSH/E and DSH are fitted witha vacuum system adaptor, used tokeep the workingarea dust-free.

Note:

Scroll saw DS 230/E, which is theideal machine for delicate projects,is offered on page 31.

36

The perfect machine model building, toy repairs, puzzles, architectural work, prototypes and for tool and die making. scroll saw blades without pin ends.

Scroll saw DSH/E

fig.1

fig.2

For standard scroll saw blades with pin ends as well as for

Standard scroll saw blades with pin ends. 127mm:

Coarse pin end blades (10 TPI): ideal for cutting soft and hard wood, plastics aswell as soft and above all also thicker material.NO 28 740 127 x 2.61 x 0.51 mm 6 blades

Fine pin end blades (18 TPI): ideal for cutting thin materials, soft and hardwood as well as plastics.NO 28 742 127 x 1.86 x 0.24 mm 6 blades

Very fine pin end blades (25 TPI): ideal for cutting non-ferrous metals, PCcards, plastics, perspex and wood.NO 28 744 127 x 1.76 x 0.25 mm 6 blades

‘Super-cut’ scroll saw blades without pins. 130mm.

For cutting soft and hard woods, plastics, Perspex, soft non-ferrousmetals:

Coarse-toothed blades (14 TPI):NO 28 110 130 x 1.50 x 0.48 mm 6 blades

Normal toothed blades, (17 TPI):NO 28 108 130 x 1.20 x 0.38 mm 6 blades

Fine-toothed blades (25 TPI):NO 28 107 130 x 0.77 x 0.30 mm6 blades

For hard metals like iron or PERTINAX:Fine toothed blades (28 TPI):NO 28 104 130 x 1.10 x 0.50 mm 6 blades

Extremely fine toothed blades (41 TPI):NO 28 106 130 x 0.74 x 0.36 mm 6 blades

Spiral blade. 125mm long with plain ends (without pins).

These blades cut all directions and obviate the turning of the workpiece (advantageous,especially with bigger workpieces). A 1.5 mm hole is required. Ideal for plastic, hardand soft woods. NO 28 746 125 x 1.2 mm 6 blades

For difficult work with wood and specialist plastics.

Wood router cutter set, 10 piecesA set with one each of the single cutters , neatly arranged in a wooden box.

NO 29 020

The MT 300 is fitted with adust collection channel andvacuum adaptor.

Used to profile, slot, route, chamfer, trim and cut.

Also used for precision details on sides and long sections, e.g. doors, flapsand housing components.Powerful, dust protected motor with toothed belt drive. Double ball bearingspindle. Cutters fitted in triple slit collets (1 each 2.4 - 3.0 and 3.2mm) aresupplied.Cutter height adjusted by means of handwheel, zero adjustable with 1 revo-lution = 1.0mm and 1 division = 0.05mm. Stable aluminium table withmitre gauge and parallel fence, as well as cutter guard and hold-down.Housing of ABS. Adaptor for vacuum cleaner, fits standard household appli-ances.

Technical data:

220 – 240V. 100W. 50/60Hz, 25,000rpm. Table 300 x 150mm. Weightapprox. 2.0kg.NO 27 050

37

Note:

These wood router cutters can be orde-red separately. See the description onpage 27.

MICRO shaper MT 300

Tungsten carbide tipped Ø 80 x 1.5 x 10mm. 36 teeth. Useto cut balsa, plywood, hard andsoft woods, POLYCARBONATE,plastic, aluminium and PC cards.NO 28 732

Even the smallest items may be cut cleanly, obviating subsequent finishing: atable indicates the recommended speeds for various materials. Very stableconstruction with load bearing parts of die-cast aluminium. Machined alumi-nium top measures 295 x 240mm. A mitre slot and fence are provided. Anextension wing is housed integrally and pulled out to increase effective tablewidth to 500mm. Drive is effected via a special, quiet motor with optibelttoothed belt. The blade arbor runs in a ball bearing and is fitted with a tung-sten carbide blade (80 x 1.5 x 10mm (24 tooth. No 28 734) as standard.Depth of cut is adjustable from 1 – 22mm and the blade may be tiltedthrough 45°.Technical data:

220 – 240V, 50/60Hz. Electronic speed control, with feedback effect, forspeeds of 4,400 – 6,800rpm. Overall size: 300 x 262 x 170mm (withoutextension wing). Weight approx. 5.2kg. Table size: 295 x 240mm. Depth ofcut: 1 – 22mm, uses all blades 50 - 85mm diameter with 10mm bore.NO 28 070

The FKS/E is fitted with a dust extractor adaptor, to keep

the working area dust-free.

Tungsten carbide tipped Ø 80 x 1.5 x 10mm. 24 teeth.Use on aluminium, hard wood,laminates, plastics.

NO 28 734

Super cut Ø 85 x 0.5 x 10mm. 80 teeth. Useon hard and soft woods, plastics.

NO 28 731

Diamond coatedØ 85 x 0.7 x 10mm.

Use on stone and tiles.

NO 28 735

The ideal machine for straight, mitre and compound cuts. Usable on all wood types, non-ferrous metals, plastics(ABS, perspex, PC cards, foam) as well as rubber, cork and many other materials.

Dado head setThe dado set consists of a guard and tungsten saw blade. Ø 50 x 2 x 10mm.Used to cut slots (dados) in drawers, picture frames, etc. Slot depth max.8mm. Easy set-up.

NO 28 736

Note:

The smaller bench circular saw KS 230 isdescribed on page 30.

Table saw FKS/E

EL

EKTRONISCHE

DREH

ZAHLREGEL

UNG

Accurate, straight cuts are easy. Standard with heightadjustment and 45° tilting saw blade.

38

The smallest and cutest in the world:40 x 80mm capacity!

39

Thicknesser DH 40

Load bearing components are all made of die-cast aluminium, with milled

seats for bearings and spindles. These characteristics are essential for vibra-tion-free, smooth thicknessing of hard and soft woods. The result: a high-grade, very smooth surface.The triple spindled table is made from die-cast aluminium and milled to closetolerances. The handwheel (zero adjustable) allows adjustments to 0.1mm.Auto feed is fitted as standard, as well as an anti-kickback device. The infeedroller is riffled and spring loaded to assist in feeding uneven materials. The out-feed roller is rubber coated to prevent marking the newly planed wood.

The cutter block is fitted with two HSS knives. The on/off switch is dust protec-ted and fitted with a no-volt release.

Technical data:

220 – 240V. 200W. 50/60Hz. Thicknessing to 80mm wide and 40mmthick. Maximum depth of cut 0.8mm. Cutter speed 6,000rpm and feed rate4.8 m/min. Table length 232mm. Overall machine dimensions 280 x 230 x235mm. Weight approx. 8kg.

NO 27 040

Spare bladesFor thicknesser DH 40. Made of HSS. Length 82mm.NO 27 042 1 pair

Note:

Minute splinters can influence the usefulness of planedwood. Precision is even more important whenworking in miniature. The thicknesser DH 40 allowsclean thicknessing as from 1.0mm material (in com-bination with an under-layer and double-sided adhesive tape).

Perfect cuts in steel, non-ferrous metals, wood and plastic.Even cuts glass and ceramics with diamond blade.

40

Note:

TPI stands for the number of teeth per inch (25mm) per bandsaw blade.

Solid, ribbed die-cast aluminium housing (not a tubular or sheet metal

construction). Double ball bearing aluminium pulleys. Sturdy, machinedtable with slot for mitre gauge as well ascoolant trough. Triple ball bearing systemwith blade guides. Adjustable for differentwidths of saw blades and with feed pipe forcoolant when used with the diamond blade.Table tilts through 45° for accurate mitresawing. Low noise 220V motor (high quality,for quiet, prolonged use) with optibelt toothed

belt. Electronically controlled speed for exceptionally accurate cutting (nosubsequent finishing necessary).A table indicates the recommendedspeed for practically all materials. Theblade size (5.0 x 0.4mm) is ideal forfine work, allowing cutting of smallradii.

Technical data:

220 – 240V. Blade speed adjustmentfrom 180 to 330m/min (feedbackeffect). Throat 150mm, maximumheight 80mm. Table 200 x 200mm (til-table from 0° to 45°). One blade 1,065x 5.0 x 0.4mm (14 TPI) is included.NO 27 172

Blade guides separately (see figure above)Triple ball bearing system with feed pipe for coolant when used with thediamond blade. Can also be used in conjunction with normal blades. NO 28 187

Blades for MBS 240/E Swedish steel. 1,065 x 5.0 x 0.4mm. Fine toothed (24 TPI). For steel and brass.NO 28 174

As above, but coarse toothed (14 TPI). For wood and plastics.NO 28 176

As above, but of special tempered steel, with induction-hardened teeth.Extra narrow for tight curves (1,065 x 3.5 x 0.5mm). Coarse toothed (14TPI). For aluminium and plastic.NO 28 180

Diamond blade for MBS 240/EFor cutting stone, ceramics, glass and PC cards. 1,065 x 3.0 x 0.3mm. Mustbe used in conjunction with coolant system! NO 28 186

MBS 230/EDiamantiertes Sägeband

Ste

ine,

Hal

bed

elst

ein

e

6

5

4

3

2

1

Flie

sen

Ker

amik

Gla

s

GF

K(g

lasf

aser

vers

tärk

t)

Wei

chh

olz

Har

tho

lz

Acr

ylg

las

Po

lyst

yro

l

AB

S

PV

C

Alu

min

ium

Ku

pfe

r

Mes

sin

g

Sta

hl

Reg

elst

ufe

Stahlsägeband

MICRO bandsaw MBS 240/E

MBS 240/E

Sands long edges, end sections, radii, mitres,

and, by turning the workpiece over – accurate

flat surfaces at right angles.

Used on soft and hard woods, non-ferrous metals,steel, plastics (perspex and PC cards), cork and rub-ber. A simple chart indicates the recommendedspeeds on different materials.

Sturdy construction:

Main body of ribbed die-cast aluminium (not a steeltube or sheet metal construction). Machined backingdisc, driven by a twin ball bearing spindle. Self-adhe-sive sanding discs fix firmly and can be replacedquickly. A dust collection adaptor for attaching avacuum cleaner or dust extractor is included.

Technical data:

220 – 240V with drive via optibelt toothed belt(reduction ratio 7.3:1). Electronic speed controlapprox. 250 – 750m/min. Disc diameter 250mm.Maximum sanding height 135mm, table 275 x 105mm (tilts 15° in, 45° out).Overall size without table 330 x 280 x 230mm. Complete with mitre gauge and2 each sanding discs of 80 grit and 240 grit.NO 28 060

With adjustable grinding speeds between 250 and 750rpm.Ideal for wet sanding.

41

The band saw and disc sander areequipped with vacuum cleaneradaptors: work in a clean, dust-freeenvironment.

250mm-sanding discmachined with dia-mond tools. Doubleball bearing.

Coolant system forwet sanding of glass,stone, tiles and steel.

Disc sander TG 250/E

Self-adhesive corundum sanding discs for TG 250/EIndustrial quality. For sanding soft and hard woods, laminates, non-ferrousmetals, steel, plastics, cork, rubber and minerals. Ø 250mm.NO 28 970 80 grit 5 discsNO 28 972 150 grit 5 discsNO 28 974 240 grit 5 discs

Self-adhesive silicon carbide sanding discs for TG 250/EFor sanding non-ferrous metals, steel, glass, PC cards, plastics and cera-mics. May also be used with the coolant option. Ø 250mm.NO 28 976 320 grit 5 discs

Self-adhesive silicone film for quick change of sandingdiscs (Ø 250mm)The film is attached to the sanding disc of the TG 250/E. The silicone surfaceallows that the attached sanding discs can easily be removed after comple-tion of the work. Four square silicone films for re-using the used sandingdiscs are included.NO 28 968

Accessories for wet sanding and cutting of glass,stone and tiles in conjunction with bandsaw MBS240/E and disc sander TG 250/E.

Coolant containerMade of plastic. With stop cock and regulator. 100cm tubing as well as 2nipples for the MBS 240/E table and mounting bracket (incl. screws). Holds1 litre.NO 28 188

Coolant collection traySize 420 x 310 x 15mm. Includes gasket for sealing the fixing holes of themachine. With 50cm discharge tube and nipple for the band saw table. Thetray is not drilled and may be used on other machines too.NO 28 189

Tungsten tipped crosscut saw blade, 80 x 1.6 x 10mm,36 tpiThe high tooth count yields clean cuts when cutting avariety of materials, e.g. balsa, plywood, soft wood and PCcards. May also be used on hard wood, POLYCARBONATE,plastic and aluminium. Fits the table saw FKS/E as well.NO 28 732

42

For clean, safe cutting to length of non-ferrous metals, plastic and wood.

Cut off/mitre saw KGS 80

Laterally moving saw head tominimize the distance betweenthe vice holding the workpiece

and the kerf. For cutting withoutvibration and chattering!

Comfortable grip with built-in switchand saw head release button.

The blade guard, made of POLYCARBONATE, is raised

automatically.

Tungsten carbide blade for non-ferrous metals, woodand plastic. Direct drive via a toothed belt.

Fence adjustable to300mm.

Round table made of die-cast alumi-nium, rotates 45° left and right.

Positive stops in 15° increments.

Integrated clamping system with fixed jaws. V-slot for round workpieces.Front side slot allows thin pieces to be clamped.

Cutting capacity at 90°(right angle cut)

Cutting capacity at 45°(mitre cut)

10

18

21

25

65

50

40

25

5

10

15

20

36

30

25

18 Ø max. 20Ø max. 25

Material size(in mm)

Max. materialwidth (in mm)

Round materi-al (in mm)

Material size(in mm)

Max. materialwidth (in mm)

Round material(in mm)

This machine is ideal for mitre cuts: the round worktablewith clamped work piece rotates, not the headstock!

The laterally moving headstock (patent DP 103.18.479.1) eliminates anypossibility of the blade and clamping system colliding. The minimumspacing between the kerf and clamping system ensures cutting with aminimum of chatter and vibration!

The fence and 45° mitre capability ensure identical lengths for pictureframes. Powerful, quiet DC motor. Power transmission takes place via atoothed belt. The tungsten tipped saw blade (80 x 1.6 x 10mm, 24 teeth)cuts non-ferrous metals, wood and plastic.

Other technical data:

220 – 240V. 200W. 50/60 Hz. 6,000/min. Base with round table of highlystable, die-cast aluminium, with CNC milled fittings and slides. Table size230 x 230mm. Weight 6kg. Consult the table for cutting capacities.

NO 27 160

Cutting disc with reinforcement, 80 x 1.0 x 10mmCorundum compound, used for cutting steel, non-ferrousmetal, plastic and wood.

NO 28 729

Note:

Cut off saw KG 50 – the baby among the KGS 80 cutoff/mitre saws (weighs only 1.5 instead of 6.0kg) – is described on page 32.Optional blades for the KGS 80 are offered on page 38 incombination with our table saw FKS/E.

Sublime precision tool. Ideal for the lab, workshop anddelicate operations.

43

The height adjustment is easily altered by means of the headstock crank and locklever. The table features a ribbed base, milled work area with T-slots. Powerful,

long life 220 - 240V motor. The quill is driven via a poly-V belt and three step pulleys. This yields a torque multi-plication of as much as 6x at the lowest speed.

Practical depth gauge with adjustable depth stop. Slidingquill for delicate works. Drill spindle with precision bea-ring. Spindle head with 1/2" thread accepts the RÖHMchuck (industrial quality), as well as the optional collets.

Ideal also for jig boring with the com-pound table KT 150 (page 54).

Technical data:

220 – 240V motor with spindle speeds1,080, 2,400 and 4,500rpm. Quill tra-vel 63mm, headstock travel via the crank 70mm. Throat of 140mm. Maximumdrill bit size 10mm, which is also the capability in steel. The optional collets offer acapability to 6mm. Useable table size 200 x 200mm. Column 45 x 500mm.Weight 10kg.NO 28 124

Collet set for drill press TBH

Triple slit and hardened. One each of 2.35 – 3.0 – 3.2 – 4.0 – 5.0 and 6.0mm. Alsoincludes the collet closure nut (M17). Neatly packed in wooden box with sliding lid.NO 28 200

T-nut set for PRIMUS vises

Two T-nuts and cap screws with washers. Used on the drill table of BFB 2000, KT150 and drill press TBH.NO 20 394

Drill press TBH

PRIMUS 75Base made of special cast iron with CNC machined ways. Fitted with inter-changeable, hardened jaws. Both jaws are slotted at the top, facilitatinggripping of flat work pieces. The feed screw features a rolled thread whichensures ease of movement even with high axial loads. Jaw width of 75mm,opening to 65mm. Distance between centres of fixing slots is 100mm. Slotsize 80 x 11mm. Weight 2.5kg.NO 20 392

PRIMUS 100Jaw width of 100mm, opening to 75mm. Distance between centres of fixingslots is 135mm. Slot size 105 x 15mm. Weight 5.0kg. Other details as forthe PRIMUS 75.NO 20 402

Smooth-running precision vises. Ease of operation and accuracy.

The height adjustment is easily altered by means of

the headstock crankand

lock lever .

Note:

The smaller version of the TBH –the bench drill machine TBM 220– is described on page 34.

Made of highly stable die-cast iron parts with CNC milledfittings and slides.

Expandable lathe/milling system made in Europe.Visible and tangible constant precision.

44

Gear casing with table showing theappropriate speed for the material anddiameter.

Combination of three speeds (attained byswapping drive belt position) and electro-

nic speed control yield speeds of 100 to3,000rpm.

Headstock spindle with 10.5mm bore and MK1taper.

Enclosed lead screw forautomatic feed of 0.05 or 0.1mm/revolution.

Cast iron bed with ground prism for tool rest and tailstock ensures minimal deflection, even at high loads.

Main switch with emergency stop functionand restart protection.

Three jaw chuck,2 - 68mm capacity.

The top slide, used fortaper turning, and the toolholder are included asstandard!

Lathe PD 230/E

Technical data:

Centre distance of 230mm, swing 52mm. Height over cross slide 28mm.Cross slide travel 60mm and top slide 45mm. Steel tool holder accepts 8 x8mm cutters. The MK1 (short) spindle has a 10.5mm bore. It runs in precisi-on ball bearings, yielding an accuracy of 0.01mm with-out chuck. Thethread cutting capability covers the most important pitches of 0.5 – 0.625 –0.7 – 0.75 – 0.8 – 1.0 – 1.25 and 1.5mm. Spindle speeds are changed bymeans of a belt and offers 300, 900 and 3,000rpm.

The electronic speed control further extends the speed range down from

100rpm (which is important when cutting threads) to 3,000rpm. The auto-matic feed offers 0.05 or 0.1mm per revolution. The tailstock spindle has aMK1 (short) bore and 30mm travel. The quiet 220 - 240V motor is fitted witha forward/reverse switch. The three jaw chuck offers 2 – 35mm capacity(internal jaws) and 24 – 68mm (external jaws). The handwheels are fittedwith zero adjustable scales. One revolution equals 1mm feed (40 divisions)and hence 0.025mm/division. Weight approx. 10kg and dimensions approx.530 x 250 x 150mm.

NO 24 004

Usable on materials such as steel, brass and aluminium and plastic. Complete withautomatic feed, thread cutting capability, headstock chuck, live centre and top slidefor taper turning. Used to part, machine stock and cut tapers. The numerous optionalaccessories allow one to drill, mill and slot.

Fixed steadyUsed when turning long, slender pieces, capacity up to 40mm(Ø). Also used when the tailstock cannot be utilised.

NO 24 080

Accessories for the lathe PD 230/E (also compatible with its predecessor PD 210).

45

Practical handwheels withzero adjustable scales. 1 division = 0.025mm,

1 revolution = 1mm.

MK 1 live centre included asstandard.

Four jaw chuck. The 4 jaws are adjusted independently,thus clamping unsymmetrical pieces, ovals, squares and odd-shaped work pieces. Capacity of 80mm. NO 24 030

Gear chuckCapacity to 10mm, with key and MK1, for tailstock. NO 24 020

As above, but with 10mm arbor. for mill/drill unit. NO 24 110

Centre turning attachment. Used for highestaccuracy with high rotational precision. One face plate, 2 fixed MK 1 (short) centres and 1 drive dogare included. Supplied in wooden box with sliding lid.NO 24 070

Collet set covering 2.0 – 10mm for concentricaccuracy better than 0.02mm. For accurate use on round com-ponents. The col-lets aremounted in the place of the headstock chuck. Eight collets(one each 2.0 - 2.5 - 3.0 - 4.0 - 5.0 - 6.0 - 8.0 and 10mm)are included. Supplied in a wooden box with sliding lid.NO 24 042

Quick change tool post for PD 230/EEasy to use!Enables quick tool changes and easy height adjustments.Including 2 tool holders for lathe tools up to 10 x 10mm.NO 24 022

Additional quick change tool holder (separately)Can be used with the above mentioned quick change toolpost.NO 24 024 piece

46

Lathe system PD 230/E. Versatile and expandable. Precision made in Europe.

Dividing attachment TA 230For lathe PD 230/E, micro miller PF 230 and FF 230

Facilitates the machining of gear teeth and non-concentric patterns. Supplied with two dividing discs (40 and 48teeth), enabling standard divisions of 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24, 40 and 48. The spindle of the attachmentis identical to that of the lathe PD 230/E. The 3 (can be ordered separately under No 24 028, see below) and 4 jawchuck (No 24 030, see page 45) may therefore be fitted to it as well (the chuck is an optional accessory). May befitted to the lathe’s cross slide or to the bed. Supplied in a wooden box with sliding lid. The 3 jaw chuck depictedhere is not included in the offer.NO 24 131

Self-centering 3 jaw chuck

Identical to the chuck of lathe PD 230/E. Radius 2 – 68mm (with reversing chucks). Body of steel. Suitable forlathe PD 230/E and the above described dividing attachment No 24 131. NO 24 028

Set includes column (35 x 400mm), mounting bracket andbolts. The mounting position on the PD 230/E is already milled.The lathe’s top slide is replaced with the table (supplied) of 110x 70mm, with 3 T-slots 12 x 6 x 6mm. The lathe now functionsas a compound table, with X-Y travel being longitudinally andcross-wise respectively. The mill/drill head is identical to themicro miller FF 230 (see page 47). Three collets of sizes 6, 8and 10mm are included.

NO 24 104

Made from 1.5 mm thick sheet metal, pow-der coated. Bevelled edges at the front andback allow slight cleaning. Mounting hole andraised base to secure lathe are pre-drilled.Length 495mm, width 215mm, height150mm. The depicted lathe is not included inthe offer.

NO 24 006

Splash guard and chip collecting tray for PD 230/E

Mill/drill head PF 230 Converts the lathe PD 230/E into a complete machining centre.

47

A small, high accuracy machining system to mill, drill and bore.

Important!

For clean milling we recommend to clamp the quillas well as the headstock onto the column.With the FF 230 this is easily done with the clamp.

MICRO miller FF 230Handwheel serves as both

height adjustment and mill fine feed.

Compound table KT 230

As described above, but excluding headstock and column. 35mm bore. Fitsthe PF 230 and PF 210. Weight approx. 11 kg.

NO 24 106

Five piece collet set for PF 230 and FF 230

Includes 1 each of 2.4 - 3.0 - 3.2 - 4.0 and 5.0mm, for milling cutters. Sup-plied in a wooden box with sliding lid.

NO 24 144

The fine step feed isnot included.

Note:

For more lathe and milling accessories and bits andcutters, see pages 52/53.

The clamps (not included) are described on page 53.

Handwheels with zero adjustable scale

(1 rev = 1mm, 1 division = 0.05mm).

Poly-V drive system offers 6speeds between

280 and 2,200rpm.

The headstock swivels through 360°, indicated on a

scale.

Height is adjusted via a zero adjustable handwheel, alsoused as fine feed when milling (one revolution equals 1mmtravel). The quill and headstock may be locked in position,essential when milling. The powerful motor effects drive viaa poly-v belt, yielding high torques, especially at lowerspeeds. Collets of 6, 8 and 10mm are included. The solidtable is T-slotted to the MICROMOT norm of 12 x 6 x 5mm.

Other technical data:

220 – 240V. 140W. 50/60Hz. Spindle speeds of 280, 550,870, 1,200, 1,500 and 2,200rpm.. 30mm travel. Table size270 x 80mm, column 35 x 400mm long. X-Y- travel is 170 x65mm. Maximum height 180mm and depth 130mm. Overallheight approx. 500mm. Weight approx. 17.0kg.NO 24 108

Fine feed for milling machine PF 230 andMICRO miller FF 230

Easily installed in a few seconds.

The feed may be used via either theheight feed (vertical) or the fine feedin the tilted position. The graduatedscale may be zero reset. One revo-lution is equivalent to 1.5mm spindletravel (1 division = 0.05mm).

NO 24 140

48

Accuracy and versatility made in Europe. DIN 8606. With gearbox.

Lathe PD 400 is the heart of a multifunctional and expandable system and is unequalled in its class!

Switch for clockwise, off andcounter-clockwise rotation.

Selector for auto-feed.

Quick-change tool post with 2 hol-ders (with stop and height adjusta-bility).

Apron handwheel.

Ideal for straight and cross cuts, taper turning, internal and external thread cutt-ing, slotting, etc. Useable on materials such as steel, non-ferrous metals,aluminium and alloys. Negligible tolerances even under heavy loads. The widerange of accessories complements the lathe’s functions. The bed is alreadyequipped with a milled and tapped surface for securing mill/drill PF 400.

Technical data:

Distance between centres 400 mm and cross slide travel 85mm, over the topslide is 116mm. Solid, ribbed bed is made from quality cast iron with groundand hardened ways. Oversized spindle with 2 adjustable taper bearings, MK3taper and 20.5mm bore. Run-out, without chuck, 5/1,000mm. Includes the pre-cision 3 jaw chuck, 100mm diameter. Six spindle speeds are provided via belt drive: stage 1: 80, 330, 1 ,400rpm andstage 2: 160, 660, 2,800rpm. Powerful, quiet motor with 550W power output.All adjusting wheels fitted with scales that may be zeroed.

One division = 0.05mm. The auto feed has speeds of 0.07 or 0.14mm/rev. An integrated gearbox, for LH and RH threads, with change gears provides 19metric pitches: 0.2 - 0.25 - 0.3 - 0.35 -0.4 - 0.45 -- 0.5 - 0.6 - 0.7 - 0.75 - 0.8 -0.9 -1.0 - 1.25 - 1.5 - 1.75 - 2.0 - 2.5 - -3.0mm. Imperial threads of 10 - 48 TPIare also possible.A rotating centre MK 2 and tailstock chuckof 10mm capacity. B12 taper, are inclu-ded. Lead screw with acme thread 12 x1.5., top slide 52mm and adjustable toturn tapers, with graduations up to 45°.Tailstock with MK 2, 24mm diameter and40mm travel (with graduations).Overall size approx. 900 x 400 x 300mm

Complete with change gears to cut threads (in 19 steps from 0.2 to 3.0mm). Clearly positioned and easy to change.

Main switch with auto-start protection and emergency off.

RÖHM precision feed (Ø 100mm).

Powerful capacitor motor with 550W outputpower.

Note:

Accessories and insertion tools for thePD 400 system, see pages 50-53.

49

With rotating centre MK 2 and tailstock chuck . Large aluminium handwheels and adju-

stable steel scale1 division = 0.05mm.

Protected lead screw with 12 x 1.5Acme thread.

Cross-braced cast iron bed, wide-legged shape, and prism slides

for apron and tailstock.

(L x W x H). Weight approx. 45kg. Uses cutting tools 10 x 10mm.

NO 24 400

A tool holder with two adjustable inserts is included as standard.

Tool postIncluding two holders. Provides quick tool changeswith easy height adjustment. NO 24 415

Individual quick-change holderFits the tool post of PD 400. NO 24 416

4 jaw chuck, self-centeringThe jaws are not independently adjustable, i.e. they areself-centering.High accuracy. Chuck diameter 100mm.

NO 24 408

4 jaw chuck with independent jaws

Used to mount irregularly and asymmetrically shapedobjects. Each jaw is adjusted individually and centeringis thus achieved manually. Hardened, reversible jaws.Chuck diameter 100mm.

NO 24 410

Faceplate and clamps

This accessory is used in the place of the standardchuck and mounts larger and asymmetrical workpieces.Diameter of 150mm, with 2 through T-slots, as well asmounting clamps.NO 24 412

Note:

Lathe PD 400 is now also available in CNC versionwith spindles running in ball bearings, stepping motor,control unit and easy to use WINDOWS compatiblesoftware. A special brochure is available. Feel free toask for a copy.

Insertion tools and additional accessories for the PD 400system are described on pages 50, 52 and 53.

50

Carefully thought-out accessories for the PD 400 lathesystem solve milling and turning problems.

Travelling steadyFitted to the carriage of the lathe. Indispensable whenturning long, slender pieces. Maximum Ø 50mm.NO 24 406

Fixed steadyUsed on the PD 400 when turning long, slender work. Fitteddirectly to the bed-ways and is used when the tailstock sup-port is inadequate. Maximum Ø 50mm.

NO 24 404

Centre turning accessory for the PD 400Ideal when turning with highest possible accuracy. Sup-plied with 2 dead centres (MK2 and MK3), drive/face platewith 30mm bore as well as reducing bushes 30/20mmand 30/15mm. A threaded drive pin screws into the head-stock flange and the drive plate.

NO 24 414

Splash guard and chip collecting tray for lathe PD 400Made from 1.5mm steel plate, powder coated. A welded cover protects the motor. Mounting holesand raised base to secure the lathe are pre-drilled. Seeping through of coolant is impossible.Length 800 x width 270 x height 290mm.

NO 24 402

Collet setFor accurate use on round components. One each 2.0 –3.0 – 4.0 – 5.0 – 6.0 – 8.0 – 10, 12 and 14mm are included.Concentric accuracy better than 0,002mm, much betterthan a chuck. One soft collet for making a custom sizeyourself. The included collet attachment is mounted in theplace of the headstock chuck. Supplied in a wooden box.

NO 24 419 Collets only

Mill/drill PF 400

Kit also includes the mounting flange and screws (the mounting surface on the PD 400 is alreadymachined). Identical to the MICRO miller FF 400 (page 51), except that no compound table is sup-plied. Instead, a work surface of steel (150 x 110mm), with 3 milled T-slots for the standard T-nuts, issupplied. Two screws secure the work surface to the cross slide.

NO 24 304

Gear tooth chuck (10mm) with adaptorIndustrial quality, however not as accurate as the collets.With 10mm adaptor which fits into the 10mm collet.Includes the chuck key.

NO 24 110

6 spindle speeds from 140 – 2,470rpm areachieved by means of a poly-V belt and pulleys.

Switch for CW or CCW rotation.

Powerful, quiet capacitor motor (400W).

Headstock with scale,tilts and locks in

position. The lockable quill has a 30mm travel.

Quill accepts collets (one each of 6 – 8 –10 and 12mm

are included).

Machined table (400 x 125mm),

with 3 T-slots.

51

Micro miler for precision work to 0.05mm accuracy!Quiet, looking good and multifunctional.

MICRO miller FF 400

Fine feed for accurate adjustments

Quick and easy to install. The clutch system enablesfeed via either the drill handle or the handwheel. The handwheel has 0.025 graduations and may be setto zero. 1 division = 0.05mm.

NO 24 254

Large handwheels with adjustable scales.1 rev = 2.0mm, 1 coarse division = 0.1mm, 1 fine division = 0.02mm.

Large handwheel and dial forheight adjustment.

Important!

Both the headstock and spindle can belocked in position when milling.

The headstock swivels through 360° indicated on a scale. The lockable quill has a travel of 30mm (viathe handle and scale) and the throat distance is 100mm. Six spindle speeds of between 140 and2,470rpm are achieved by means of pulleys and a poly-V belt. Cutting tools are secured in the 6, 8, 10and 12mm collets provided. The headstock height is adjusted via the handwheel and dial (1 rev = 2.0mm)The solid, milled compound table has 3 T-slots for the 8 standard T-nuts.Other technical data:

220 – 240V, 400W, 50/60Hz. Spindle speeds of 140, 310, 480, 730, 1,140 and 2,470rpm. Column 45 x500mm and table 400 x 125mm. X and Y travel amount to 225 and 80mm respectively. Footprint size 370 x 350mm. Overall height approx. 600mm. Weight approx. 47kg. Complete with KT 400.NO 24 308

Five piece collet set for millers PF 400 and FF 400Includes 1 each of diameter 2.4 - 3.0 - 3.2 - 4.0 und 5.0mm, for milling cutters. Supplied in wooden box.NO 24 252

Compound table KT 400As described above but excluding the column and headstock. The 45mm bore also fits the precision drillstand BFB 2000. Weight 23kg. NO 24 303

Clamps, cutters and workpiece are not included.

Precision V-blocks

Used to clamp various work pieces.

Made from hardened steel, precision ground inpairs. Four different depths of prism incisions V, allat 90°. Size 50 x 30 x 30mm. The solid clampand knurled knob ensure superb securing of theworkpiece. Supplied in a wooden box with sliding lid.

NO 24 262 2 pieces

52

Lathe accessories for PD 230/E and PD 400.

Lathe practice for model makers

An interesting book by Tilman Wallroth, in which all important lathecomponents and working stages aredealt with in a practical manner.Included are many easily understood examples, clear and informative illustrations and many tips for use.Highly scientific advice was deliberately omitted.230 pages, written without reference to trade-marks.German only!

NO 24 999

Nearly all the components are supplied in sturdy wooden boxes.

Precision vise

Milled in steel.

May be used on its side and back. Jaw width of60 mm, clamping capacity 42mm.Complete with securing bolts and packed in awooden box with sliding lid.

NO 24 255

Universal dividing table UT 400

Facilitates the manufacture of odd-shaped

objects.

The table may be fixed horizontally or vertically.Drive takes place via the worm drive and in its360° travel yields nearly all the divisions below100. Supplied with 4 index plates: 27/42, 33/40,34/39 and 36/38. Used to manufacture sprockets,gearboxes and drives, ratchets, cams, etc. Thefaceplate is not included. The taper is identical tothe head spindle of the lathe. Supplied in woodenbox with sliding lid.

NO 24 421

Tool holder for rotary tools. For use on lathe machines.

Made of steel 30 x 10 x 65 mm. This holderallows mounting of our rotary tool LB/E or IB/E tothe tool post of the lathes PD 230/E and PD 400for grinding or polishing purposes. MICROMOTcollar size Ø 20mm. Shaft 8 x 10mm for toolholders PD 230/E and PD 400.

NO 24 098

Die holder for round dies, threadsM 3 to M 10

Sizes: M 3 – 4 – 5 – 6 – 8 – 10. The straightshaft fits the holder Ø 10mm when mounted inthe tailstock of the PD 230/E or PD 400. The hol-der is held by hand while cutting the threads.Comes in a wooden box.NO 24 082

Radius cutting attachment

Usable on both the PD 230 and PD 400

systems is mounted on the cross slide in placeof the tool holder. Cuts convex and concaveshapes to depth of 1.0mm in steel as well as innon-ferrous metals and plastics. Radii or 3/4”spheres of diameter up to max. 32mm are possibleComes with one finishing cutter 8 x 8 X 80mm in awooden box with sliding lid.NO 24 061

HSS boring tool set, 6 pieces

One each cutter for 60 degree (metric) and 55degree (Whitworth) inside threads, 1.3mm -2.65mm and 4mm. Shaft of Ø 6mm. Length 95mm. The cutters are held by a tool holder thatmounts to the tool post of either the PD 230/E orPD 400.Comes in a wooden box.NO 24 520

Edge finder set

Used for fast and accurate location of startingpoint of workpieces with respect to the machinespindle on milling machines. Size 6 x 6 x 50mmand 6 x 5 x 75mm. Neatly packed in a wooden box.

NO 24 434

53

Milling cutter set (2 - 5mm)All cutters with 6mmshaft. Cutters of Ø 2, 3, 4 and 5mm. Double fluted according to DIN 327. Made ofHSS. Supplied in wooden box with sliding lid.

NO 24 610

Milling cutter set (6 - 10mm) 4 cutters Ø 6, 7, 8 and 10mm. Four flutedesign according to DIN 844. Shafts 6.0 and 10.0mm respectively.Made of HSS. Supplied in wooden box with sliding lid.NO 24 620

Three piece centre drill set

Made of HSS steel. Din 333 (type A) 60°. Com-plete set centre drills with sizes of 2.0 - 2.5 and3.15mm.

NO 24 630

Arbor (A)

For HSS gear cutters. 16mm-fitting. Cylindricalshaft Ø 10mm. NO 24 425

HSS gear cutters (B)Module 0.5 x 40mm outside diameter. 16mmbore.NO 24 426 No 1 (12-13 teeth)NO 24 427 No 2 (14-16 teeth)NO 24 428 No 3 (17-20 teeth)NO 24 429 No 4 (21-25 teeth)NO 24 430 No 5 (26-34 teeth)NO 24 431 No 6 (35-54 teeth)

Step clamp set, milled steel

Consists of 2 step blocks and 2 clamps, 2 nuts,2 T slot nuts (B = 7mm, E = 12mm, D = 4mm, C= 7.2mm). Secures objects to approx. 35mm

thick. May be used with PD 230/E, PF/FF 230,PD 400, PF/FF 400, face plate 24 412 and KT150. Supplied in wooden box with sliding lid. Fordescription of the ‘smaller’ version No 24 256,see page 18.NO 24 257

Cutting tools of high quality cobaltHSS steel, ground.

Five piece setOne each roughing out, parting, finishing cut, leftand right cutter. Supplied in wooden box with sli-ding lid.8 x 8 x 80mm (for PD 230/E). NO 24 530

10 x 10 x 80mm (for PD 400) NO 24 550

Three piece thread cutting set

One cutter for external thread (ground to 60°,metric) one for internal thread, one general cut-ting. Supplied in wooden box with sliding lid.8 x 8 x 80mm (for PD 230/E).NO 24 540

10 x 10 x 80mm (for PD 400)NO 24 552

Parting tool holder and tool Used in the PD 400 quick- change system. Used to partstock and cut slots. The 12 x 3 x 85mm HSS toolcontains cobalt..

NO 24 417

Spare tool for parting tool holderAs described above.NO 24 554

Cutter set with tungsten insertsfor PD 230/E and PD 400

Three holders (90mm long)1. for roughing out;2. for longitudinal work; 3. for 90mm boring bar, holes from 12mm. Standard tungsten inserts, 55°, plated (commercial-ly available version). Three additional inserts secu-ring screw and key TX 8 are included.

NO 24 555 8 x 8mm (for PD 230/E) NO 24 556 10 x 10mm (for PD 400)

Tungsten disposable tipsFor the holders as described above. NO 24 557 Ten piece set.

AB

� � �

The triple ball bearing armature provides direct drive (no gearing). This

yields virtually vibration-free operation and extremely high spindle

accuracy.

Die-cast aluminium head with spindle neck of 43mm (European standard).Large, easy to use switch with emergency function. Chart indicates optimumspeeds for milling and drilling of various materials.

Other technical data:

Control unit with full wave electronics for 220 – 240V, 40VDC secondary vol-tage. Power consumption up tomax. 250W. Spindle speed infinitely variablebetween 900 and 6,000rpm.Complete with triple slit. hardenedcollets covering 2.35 – 3.0 – 3.2– 4.0 – 5.0 and 6.0mm. as wellas 2 spanners.

NO 20 165

Die-cast aluminium compound tableKT 150

With precision milled dovetail slides, thus also suitable for metal work.

For routing, milling, slotting of steel, non-ferrous metal, plastic and wood.Each slide provided with locking screws. Dovetail fittings/gib strips adjustableto eliminate play. Feed adjustments by means of 2 handwheels with adjus-table, graduated dials (one revolution = 2 mm, one graduation = 0.05mm).Machined table, 3 T-slots for fastening machine vices and clamping kits.

Fence supplied with pre-drilledpositioning holes, including45°, fastening screws andclamp used for routing. Table200 x 200mm. Maximumtravel 150 x 150mm. Overallheight 75mm. Weight 4.9kg.The clamp shoes right in theillustration are not included.

NO 20 150

BFB 2000,

see page 55

Note:

The motor operates at 40V, supplied from the powerpack/controller. At this level, the control characteristics

are ideal and yield high torque, even at lower speeds.(The compound table, drill stand

and step clamps are not included.)

54

Complete work centre for milling and drilling: mill/drill unit BFB2000, compound table KT 150 and mill/drill system BFW 40/E.

Mill/drill system BFW 40/E, with controller for speeds of 900 – 6,000rpm.

55

High strength precision die-cast aluminium, with precision milled dovetail slides.

Consists of 2 step blocks and 2clamps, 2 nuts, 2 T-slot nuts. Forsecuring objects to approx. 35mm high. May be used with com-pound table KT 150 and millers PF400 and FF 400. Neatly packed in a wooden boxwith sliding lid.

NO 24 257

For more accessories, see page 53!

Head with precision milled dovetail slide and may be tilted through 90°

to give all-round versatility: diagonal drilling, versatile without need ofspecial milling bits, milling diagonal slots. Fine feed selectable, allowing finehead feed for milling. With dial and depth scale. Geared rack and pinion feedfor effortless drilling. 45mm diameter drill column, 500mm long. Approx.140mm throat (column outside to tool centre). 65mm stroke. Machined,solid base plate approx. 200 x 200mm. All drills with standard 43mm spindlecollars may be utilised directly: BOSCH, AEG, FEIN, METABO, KRESS,BLACK & DECKER, SKIL. Weight approx. 6.5kg. NO 20 000

HSS milling cutter set (2 - 5mm)Ideal for mill/drill system BFW 40/E

HSS, all with 6 mm cylindrical shaft. Consists of cutters of 2, 3, 4 and 5mmdiameter. Double fluted, according to DIN327. Made of HSS. Supplied in wooden box with sliding lid.NO 24 610

Steel step clamp set

Selectable fine feed

with lever.Milled, adjustabledovetail slide.

Clear, easily legible depth scale.

45mm diameter column,500mm long.

Adjustable zero position for fine feed.

Stable, machined worktop with T-slots.

Head feed adjustableto fine feed by means

of leverHead may be tilted

through 90°

With scale Horizontal application

e.g. for slot milling

Mill/drill unit BFB 2000For standard drills with 43mm spindle neck.

NO 95 310/PR210207220.5J

© b

y P

RO

XX

ON

S.A

., L-

6868

WE

CK

ER

Ste

inic

ke, W

ittlic

h

PROXXON GmbHIm Spanischen 18 – 24

D-54518 Niersbach/Germany

Tel. +49-6575-78-0Fax +49-6575-78-105

e-mail: [email protected]

We reserve the right to modify any technical specification as a result ofimprovement.