Not appropriate for regulatory submission. Please visit www.spectrumchemical.com or contact Tech Services for the most up‐to‐date information contained in this information package. Spectrum Chemical Mfg Corp 769 Jersey Avenue New Brunswick, NJ 08901 Phone 732.214.1300 Ver4.03 21.September.2017 Scientific Documentation C1018, Cupric Chloride, Dihydrate, USP
27
Embed
C1018, Cupric Chloride, Dihydrate, USP · Copper chloride (CuCl2), dihydrate Copper (II) chloride dihydrate CAS #: 10125-13-0 RTECS # GL7030000 CI#: Not available Recommended use
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Not appropriate for regulatory submission. Please visit www.spectrumchemical.com or contact Tech Services for the most up‐to‐date information contained in this information package.
Spectrum Chemical Mfg Corp 769 Jersey Avenue New Brunswick, NJ 08901 Phone 732.214.1300
Thank you for your interest in Spectrum’s quality products and services.
Spectrum has been proudly serving scientific community for over 45 years. It is our mission to manufacture and distribute fine chemicals and laboratory products with Quality and delivery you can count on every time.
To accomplish our mission, Spectrum utilizes our sourcing leverage and supplier qualification expertise in offering one of the industry’s most comprehensive line of fine chemical products under one brand, in packaging configurations designed to meet your research and production requirements. Our product grades include: USP, NF, BP, EP, JP, FCC, ACS, KSA, Reagent grade, as well as DEA controlled substances. We operate facilities in the United States on the East Coast, West Coast, as well as in Shanghai, China in order to provide the best logistical support for our customers.
At Spectrum, Quality is priority number one. Suppliers with the best qualifications are preferred and we employ full-functioning in-house analytical laboratories at each of our facilities. Our facilities and systems are USFDA registered and ISO certified. We frequently host customer audits and cherish opportunities for improvements. Quality is engrained into our culture. Quality is priority number one.
In the following pages, we have designed and prepared documented scientific information to aid you in your initial qualification or your continual use of our products. Please do not hesitate to contact us if further information or the most up-to-date documentation is desired from any of the covered areas.
We appreciate your business and we look forward to hearing from you.
Hazards not otherwise classified (HNOC)Not Applicable
Other hazardsNot available
Precautionary Statements - PreventionWash face, hands and any exposed skin thoroughly after handlingDo not eat, drink or smoke when using this productDo not breathe dust/fume/gas/mist/vapors/sprayWear protective gloves/protective clothing/eye protection/face protection
Precautionary Statements - ResponseSpecific treatment (see .? on this label)Immediately call a POISON CENTER or doctor/physicianSpecific treatment (see .? on this label)IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.Immediately call a POISON CENTER or doctor/physician.IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/showerWash contaminated clothing before reuseIF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTERor doctor/physician.IF SWALLOWED: Immediately call a POISON CENTER or doctor/physicianRinse mouthDo NOT induce vomiting
Precautionary Statements - StorageStore locked up
Precautionary Statements - DisposalDispose of contents/container to an approved waste disposal plant
Hazard statementsToxic if swallowedCauses severe skin burns and eye damage
4. FIRST AID MEASURESFirst aid measuresGeneral Advice: Poison information centres in each State capital city can provide additional
assistance for scheduled poisons (13 1126). Ensure that medical personnel areaware of the material(s) involved and take precautions to protect themselves. Firstaider needs to protect himself.
Skin Contact: Wash off immediately with soap and plenty of water. Continue flushing with plenty of water forat least 15 minutes. Remove all contaminated clothes and shoes. Immediate medical attentionis required. Call a physician immediately.
Eye Contact: Flush eye with water for 15 minutes. Immediate medical attention is required. Call a physicianimmediately.
Inhalation: Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration.WARNING! It may be hazardous to the person providing aid to give mouth-to-mouthresuscitation when the inhaled or ingested material is toxic, infectious or corrosive. Do not usemouth-to-mouth resuscitation if victim ingested or inhaled the substance; induce artificialrespiration with the aid of a pocket mask equipped with a one-way valve or other properrespiratory medical device. Immediate medical attention is required. Call a physicianimmediately.
Ingestion: Do not induce vomiting without medical advice. Never give anything by mouth to anunconscious person. Immediate medical attention is required. Call a physician or PoisonControl Centre immediately.
Most important symptoms and effects, both acute and delayedSymptoms Severe skin and eye irritation or burns. Causes digestive (gastrointestinal) tract irritation. May
cause gastrointestinal (digestive) tract burns. May cause abdominal pain, nausea, vomiting,diarrhea.
Indication of any immediate medical attention and special treatment neededNotes to Physician: Treat symptomatically
Protection of first-aidersFirst-Aid Providers: Avoid exposure to blood or body fluids. Wear gloves and other necessary protective clothing. Dispose ofcontaminated clothing and equipment as bio-hazardous waste
5. FIRE-FIGHTING MEASURES
Extinguishing Media
Suitable Extinguishing Media: The product is not flammable. If it is involved in a fire,extinguish the fire using an agent suitable for the type ofsurrounding fire.
Unsuitable Extinguishing Media: No information available.
Specific hazards: Contact with metals may evolve flammable hydrogen gas.Containers may explode when heated. When mixed withpostassium or sodium, it produces a strong explosion onimpact.
Special Protective Actions for Firefighters
Specific Methods: No information available.
Product name: Cupric Chloride,dihydrate, USP
3 / 11Product code: C1018
Special Protective Equipment for Firefighters: As in any fire, wear self-contained breathing apparatuspressure-demand, MSHA/NIOSH (approved or equivalent)and full protective gear
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal Precautions: Keep people away from and upwind of spill/leak. Ensure adequate ventilation. Do not touchdamaged containers or spilled material unless wearing appropriate protective clothing. Usepersonal protective equipment. Avoid contact with skin, eyes and clothing.
Environmental precautions Prevent further leakage or spillage if safe to do so. Should not be released into theenvironment. Do not let product enter drains. Prevent entry into waterways, sewers,basements or confined areas.
Methods and material for containment and cleaning up
Methods for containment Stop leak if you can do it without risk. Cover with plastic sheet to prevent spreading.
Methods for cleaning up Use appropriate tools to put the spilled solid in a suitable waste disposal container.Clean contaminated surface thoroughly.
7. HANDLING AND STORAGE
Precautions for safe handling
Technical Measures/Precautions:Use only in area provided with appropriate exhaust ventilation. Keep away from incompatible materials.
Safe Handling Advice:Wear personal protective equipment. Avoid contact with skin, eyes and clothing. Do not ingest. Do not breathevapours/dust. Handle in accordance with good industrial hygiene and safety practice.
Conditions for safe storage, including any incompatibilities
Technical Measures/Storage Conditions:Deliquescent. Protect from moisture. Keep container tightly closed in a dry and well-ventilated place. Store at roomtemperature in the original container. Store away from incompatible materials.
Engineering measures to reduce exposure: Ensure adequate ventilation. Use process enclosures, localexhaust ventilation, or other engineering controls to keepairborne levels below recommended exposure limits. If useroperations generate dust, fume or mist, use ventilation tokeep exposure to airborne contaminants below the exposurelimit.
Individual protection measures, such as personal protective equipment
Personal Protective Equipment
Eye protection: Face-shield.
Skin and body protection: Chemical resistant protective suit. Gloves. boots.
Respiratory protection: Wear respirator with dust filter..
Hygiene measures: Avoid contact with skin, eyes and clothing. When using, do not eat, drink or smoke.Wash hands before breaks and immediately after handling the product.
9. PHYSICAL AND CHEMICAL PROPERTIES
pH:No information available
Melting point/range(°C/°F):No information available
Formula:CUCl2.2H2O
Boiling point/range(°C/°F):No information available
Decomposition temperature(°C/°F):No information available
Specific gravity:No information available
Molecular/Formula weight:170.48
Density (g/cm3):2.54
Color:Blue. Blue green.
Bulk density:No information available
Vapor pressure @ 20°C (kPa):No information available
Flash point (°C):No data available
Evaporation rate:No information available
Vapor density:No information available
VOC content (g/L):No information available
Flashpoint (°C/°F):No information available.
Odor threshold (ppm):No information available
Physical state:Solid.
Partition coefficient(n-octanol/water):No information available
Viscosity:No information available
Flash Point Tested according to:Not available
Miscibility:No information available
Odor:Odorless.
Solubility:Freely soluble in waterFreely soluble in MethanolFreely soluble in Ethyl alcoholSoluble in AcetoneSoluble in ethyl acetateSlightly soluble in EtherSolubility in Water: 76 parts in 100 partswater @ 25 deg. C
Lower Explosion Limit (%):No information available
Upper Explosion Limit (%):No information available
Appearance:Crystals.
Product code: C1018
Autoignition Temperature (°C/°F):No information available
Product name: Cupric Chloride,dihydrate, USP
5 / 11
TasteNo information available
10. STABILITY AND REACTIVITY
Reactivity
Chemical stabilityStability: Stable at normal conditions
Possibility of Hazardous Reactions: Hazardous polymerization does not occur
Conditions to avoid: Exposure to moisture. Exposure to moist air. Deliquescent in moist air. Efflorescent indry air. Incompatible materials.
LD50/dermal/rabbitVALUE-Acute Tox Dermal = No information available
LD50/dermal/ratVALUE -Acute Tox Dermal = No information available
LC50/inhalation/ratVALUE-Vapor = No information availableVALUE-Gas = No information availableVALUE-Dust/Mist = No information available
LC50/Inhalation/mouse
Evolves flammable hydrogen gas on contact with metalsContact with acids or acid fumes may evolve highly toxic hydrogen chloride fumesWater loss from 70-200 deg. C
Product name: Cupric Chloride,dihydrate, USP
6 / 11Product code: C1018
VALUE-Vapor = No information availableVALUE - Gas = No information availableVALUE - Dust/Mist = No information available
Symptoms
Skin Contact: Causes severe skin irritation and burns with itiching, erythema, burning pain.
Eye Contact: Severe eye irritation. Causes eye burns. May cause corneal damage. Symptoms caninclude redness, pain, blurred vision , discoloration, loss of vision, eye damage suchpermanent corneal opacifiaction, chemical conjunctivitis, ulceration.
Inhalation Causes respiratory tract (nose, throat, lungs), and mucous membrane irritationcausing coughing sore throat, wheezing, and shortness of breath. It may causeulceration and perforation of the nasal septum. It may produce delayed pulmonaryedema. When heated this compound may give off copper fume, which can cause"fume metal fever" with symptoms similar to the common cold, including chills andstiffness of the head.
Ingestion Toxic if swallowed. Ingestion of sufficient concentrations may result in metallic taste,salivation, headache, nausea, vomiting, burning in the mouth, epigastrium(esophagus and stomach), diaphoresis, abdominal/gastric pain, gastrointestinalbleeding, and bloody diarrhea. The vomitius is characteristically greenish-blue.Other systemic effects may occur including hemolysis, anemia, and anuria, oliguria,hematuria, acute kidney tubular necrosis, jaundice, hepatomegaly (i.e.liver andkidney damage) (secondary to hemolysis). May affect behavior/central nervoussystem (somnolence, convulsions). Rarely methemoglobinemia has been reported..
Aspiration hazard No information available
Delayed and immediate effects as well as chronic effects from short and long-term exposure
Chronic Toxicity Repeated exposure may cause thickening of the skin and greenish color to the skinand hair.Repeated exposure by inhalation may cause ulceration of the nasal septum andshrinking of the inner lining of the nose.Repeated skin contact may cause dermatitis.Repeated or prolonged ingestion may cause liver and kidney damage due toaccumulation of copper in these organs. Chronic copper poisoning is rare. It hasbeen mainly observed in individuals with Wilson disease or Indian childhoodcirrhosis, in which progressive copper toxicity results from a hereditary metabolicdisorder involving deficiency in the copper-binding and transport proteinceruloplasmin. Severe liver disease involving massive accumulation of copper in theliver has been reported in a few cases not meeting the diagnostic criteria for eitherWilson disease or Indian childhood cirrhosis. Moreover, this so-called Indianchildhood cirrhosis is becoming increasingly recognized in non-Indian children, andhepatic copper levels should be determined in all cases of childhood liver failure ofunknown origin (aka idiopathic copper toxicosis).Generally, the effects of copper excess are reversible.Repeated or prolonged inhalation may affect the blood (changes in white blood cellcount), metabolism (metabolic acidosis)..
Sensitization: No information available
Mutagenic Effects: No information available
Carcinogenic effects: Not considered carcinogenic
Reproductive toxicity No data is available
Product name: Cupric Chloride,dihydrate, USP
7 / 11Product code: C1018
Reproductive Effects: No information availableDevelopmental Effects: No information availableTeratogenic Effects: No information available
Specific Target Organ Toxicity
STOT - single exposure No information availableSTOT - repeated exposure No information availableTarget Organs: Skin. Respiratory system. Lungs. Liver. Kidneys.
12. ECOLOGICAL INFORMATION
Ecotoxicity
Ecotoxicity effects: No data available.
Persistence and degradability: No information available
Bioaccumulative potential: No information available
Mobility: No information available
13. DISPOSAL CONSIDERATIONS
Disposal Methods
Waste from residues / unused products:Waste must be disposed of in accordance with Federal, State and Local regulation.
Contaminated packaging:Empty containers should be taken for local recycling, recovery or waste disposal
14. TRANSPORT INFORMATION
DOTUN-No: UN2802Proper Shipping Name: Copper chlorideHazard Class: 8Subsidiary Risk: Not applicablePacking Group: IIIMarine Pollutant Marine PollutantERG No: 154DOT RQ (lbs): No information available
Symbol(s): PP, R2
TDG (Canada)UN-No: UN2802Proper Shipping Name: Copper chlorideHazard Class: 8Subsidiary Risk: No information availablePacking Group: III
Product name: Cupric Chloride,dihydrate, USP
8 / 11Product code: C1018
14. TRANSPORT INFORMATIONDescription: No information available
ADR
UN-No: UN2802Proper Shipping Name: Copper chlorideHazard Class: 8Packing Group: IIISubsidiary Risk: No information availableClassification Code: No information availableDescription: No information availableCEFIC Tremcard No: No information available
IMO / IMDGUN-No: UN2802Proper Shipping Name: Copper chlorideHazard Class: 8Subsidiary Risk: PPacking Group: IIIDescription: No information availableIMDG Page: No information availableMarine Pollutant Marine PollutantEMS: F-AMFAG: No information availableMaximum Quantity: No information available
RIDUN-No: UN2802Proper Shipping Name: Copper chlorideHazard Class: 8Subsidiary Risk: 8Packing Group: IIIClassification Code: No information availableDescription: No information available
ICAOUN-No: UN2802Proper Shipping Name: Copper chlorideHazard Class: 8Subsidiary Risk: No information availablePacking Group: IIIDescription: No information available
IATAUN-No: UN2802Proper Shipping Name: Copper chlorideHazard Class: 8Subsidiary Risk: No information availablePacking Group: IIIERG Code: 8LDescription: No information available
15. REGULATORY INFORMATION
International Inventories
U.S. Regulations
Product name: Cupric Chloride,dihydrate, USP
9 / 11Product code: C1018
California Prop. 65: Safe Drinking Water and Toxic Enforcement Act of 1986.
Chemicals Known to the State of California to Cause Cancer:This product does not contain a chemical requiring a warning under California Prop. 65. (See table below)
Chemicals Known to the State of California to Cause Reproductive Toxicity:This product does not contain a chemical requiring a warning under California Prop. 65. (See table below)
CERCLA/SARA
U.S. TSCA
Canada
WHMIS hazard class:D1B Toxic materialsE Corrosive material
Canada Controlled Products Regulation:This product has been classified according to the hazard criteria of the CPR (Controlled Products Regulation) and the MSDS containsall of the information required by the CPR.
Inventory
EU Classification
R-phrase(s)R34 - Causes burns.R22 - Harmful if swallowed.R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
S -phrase(s)S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).S60 - This material and its container must be disposed of as hazardous waste.S61 - Avoid release to the environment. Refer to special instructions/safety data sheets.
The product is classified in accordance with Annex VI to Directive 67/548/EEC
Indication of danger:Xn - Harmful.N - Dangerous for the environment.
Disclaimer: All chemicals may pose unknown hazards and should be used with caution. ThisSafety Data Sheet (SDS) applies only to the material as packaged. If this product iscombined with other materials, deteriorates, or becomes contaminated, it may posehazards not mentioned in this SDS. The physical properties reported in this SDS areobtained from the literature and do not constitute product specifications. Informationcontained herein does not constitute a warranty, whether expressed or implied, as tothe safety, merchantability or fitness of the goods for a particular purpose. SpectrumChemicals & Laboratory Products, Inc. assumes no responsibility for results obtainedor for incidental or consequential damages, including lost profits, arising from the useof these data. No warranty against infringement of any patent, copyright or trademarkis made or implied. It shall be the user's responsibility to develop proper methods ofhandling and personal protection based on the actual conditions of use. While thisSDS is based on technical data judged to be reliable, Spectrum assumes noresponsibility for the completeness or accuracy of the information contained herein.
End of Material Safety Data Sheet
Product code: C1018
Preparation Date: 6/23/2014
Product name: Cupric Chloride,dihydrate, USP
11 / 11
See Section 8.
HMIS Personal Protective EquipmentNFPA
21.September.2017
Manufacturer Product Covered: C1018, Cupric Chloride, Dihydrate, USP Spectrum takes ownership as the manufacturer for the Spectrum product listed above and provides full quality assurance, customer service, and technical product support. While information concerning the raw material manufacturer of our starting materials is considered proprietary, such information can be made available upon request contingent on demonstration of business volume justification and successful execution of confidential disclosure agreement (CDA). Requests for disclosure of proprietary raw material manufacturer information may be submitted to the assigned account representative for consideration.
Sincerely,
Alan Wang, MSQA, ASQ CQA Director of Technical Services [email protected]
This is to certify that the quality management system of: Spectrum Chemicals and
Laboratory Products, Inc. Main Site: 14422 South San Pedro Street, Gardena, California, 90248,
USA,
Additional sites:13915 South Main Street, Los Angeles, California,
90061, USA
769 Jersey Avenue, New Brunswick, New Jersey, 08901, USA
755 Jersey Avenue, New Brunswick, New Jersey, 08901, USA
777 Jersey Avenue, New Brunswick, New Jersey, 08901, USA
400 N. Oracle, Suite 221, Tucson, Arizona, 85704, USA, USA
has been assessed and registered by Intertek as conforming to the
requirements of:
ISO 9001:2015 The quality management system is applicable to: Main Site: The manufacture and distribution of specialty fine
chemicals, solutions, equipment, supplies and products for the
biotechnology, environmental and process industries.
Certificate Number:
94-316m-03
Initial Certification Date:
27 December 1994
Certificate Issue Date:
31 July 2017
Certificate Expiry Date:
28 January 2019
Authorized Signature Calin Moldovean President Business Assurance Intertek Testing Services NA, Inc. dba Intertek 900 Chelmsford Street, Lowell, MA, USA
In the issuance of this certificate, Intertek assumes no liability to any party other than to the Client, and then only in accordance with the agreed upon Certification
Agreement. This certificate’s validity is subject to the organization maintaining their system in accordance with Intertek’s requirements for systems certification.
Validity may be confirmed via email at [email protected] or by scanning the code to the right with a smartphone. The certificate remains the property
of Intertek, to whom it must be returned upon request
CT-ISO 9001:2015-ANAB-EN-LT-P-01.jul.17
This appendix identifies the locations by the management system of
Spectrum Chemicals and Laboratory
Products, Inc. 755 and 769 Jersey Avenue: The manufacture and distribution of specialty fine chemicals, solutions, equipment,
supplies and products for the laboratory, pharmaceutical, food, healthcare, cosmetic, fragrance, biotechnology,
environmental and process industries.
777 Jersey Avenue: The manufacture and distribution of specialty fine chemicals, solutions, equipment, supplies
and products for Compounding Pharmacies.
7400 N. Oracle: The manufacture and distribution of specialty fine chemicals, solutions, equipment, supplies and
products for the laboratory, pharmaceutical, food, healthcare, cosmetic, fragrance, biotechnology,
environmental and process industries.
In the issuance of this certificate, Intertek assumes no liability to any party other than to the Client, and then only in accordance with the agreed upon Certification Agreement. This certificate’s validity is subject to the organization maintaining their system in accordance with Intertek’s requirements for systems certification. Validity may be confirmed via email at [email protected] or by scanning the code to the right with a smartphone.
The certificate remains the property of Intertek, to whom it must be returned upon request.
CT-Appendix-ANAB-EN-LT-P-01.jul.17
Intertek Certification Limited is a UKAS accredited body under schedule of accreditation no. 014.
In the issuance of this certificate, Intertek assumes no liability to any party other than to the client, and then only in accordance with the agreed upon Certification Agreement. This certificate’s validity is subject to the organization maintaining their system in accordance with Intertek’s requirements for systems certification. Validity may be confirmed via email at [email protected] or by scanning the code to the right with a smartphone. The annual validity of the certificate can also be checked through the website http://www.cnca.gov.cn of CNCA in China. The certificate remains the property of Intertek, to whom it must be returned upon request.
This is to certify that the quality management system of
Spectrum China Ltd.
has been assessed and registered by Intertek as conforming to the requirements of
ISO 9001: 2008 The quality management system is applicable to:
Provision of service of purchase, testing and sales for chemical products, repacking of non-hazardous chemical products.
Building A20, No. 3802, Shengang Road, Songjiang District, Shanghai, China
Organization Code: 77762704-8 Certificate Number: 111310001-01 Certificate Issue Date: 17 November 2015 Certificate Expiry Date: 14 September 2018
Authorised Signature: Calin Moldovean – President, Business Assurance Intertek Certification Limited, 10A Victory Park, Victory Road, Derby DE24 8ZF, United Kingdom
Certificate of Registration
July 13, 2017
Certification of Compliance with current Good Manufacturing Practices
Dear Valued Customer:
Spectrum Chemical Mfg Corp certifies that our USP, NF, FCC, EP, BP, JP and food grade products are produced, processed, packaged and held in compliance with current Good Manufacturing Practices (cGMP) in accordance with the applicable parts of 21 CFR, parts 210 and 211 of the Code of Federal Regulations.
Spectrum is an FDA registered and inspected Drug Establishment. Our United States Food and Drug Administration (USFDA) Registration numbers are as follows:
Thank you for your interest in Spectrum products. If we may be of further assistance, please feel free to contact the Quality Assurance department at 310-516-8000 or via email at [email protected]
Sincerely,
Oralia Chavez Quality Assurance Specialist
September 21, 2017
Certification of Compliance with current Good Manufacturing Practices
Dear Valued Customer:
Spectrum Chemical Mfg Corp certifies that the following product(s) is produced, processed, packaged and held in compliance with current Good Manufacturing Practices (cGMP) in accordance with the applicable parts of 21 CFR, parts 210 and 211 of the Code of Federal Regulations.
Catalog Number Product Name C1018 Cupric Chloride, Dihydrate, USP
Spectrum is an FDA registered and inspected Drug Establishment. Our United States Food and Drug Administration (USFDA) Registration numbers are as follows:
Thank you for your interest in Spectrum products. If we may be of further assistance, please feel free to contact the Quality Assurance department at 310-516-8000 or via email at [email protected]
Sincerely,
Oralia Chavez Quality Assurance Specialist
Sep 1, 2017 Re: Cupric Chloride, Dihydrate, USP-C1018 To Whom It May Concern: Thank you for your interest in Spectrum high quality chemicals. We at Spectrum Chemical Mfg. Corp. understand the concern regarding Bovine Spongiform Encephalopathy (BSE). Please be assured that the chemical Cupric Chloride, Dihydrate, USP-C1018 is BSE/TSE free. If you have any further questions, please contact Tech Services at (310) 516- 8000 Extension 5471, or by email at [email protected]. Sincerely, Darlene Dagdag-Lyudmirskiy Technical Services Spectrum Chemical Mfg. Corp. This document has been produced electronically and is valid without a signature
Sept 1, 2017 Re: Cupric Chloride, Dihydrate, USP-C1018 To Whom It May Concern: Thank you for your interest in Spectrum high quality chemicals. We at Spectrum Chemical Mfg. Corp. understand the concern regarding the presence of allergens in raw materials. Please be assured that the following chemical does not contain (Milk; Egg; Tree nuts; Wheat; Peanuts; Soy; Cereals containing Gluten). Cupric Chloride, Dihydrate, USP-C1018
If you have any further questions, please contact Tech Services at (310) 516- 8000 Extension 5471, or by email at [email protected]. Sincerely, Darlene Dagdag-Lyudmirskiy Technical Services Spectrum Chemical Mfg. Corp. This document has been produced electronically and is valid without a signature
Certificate Of Analysis
Item Number C1018 Lot Number 2GC0297
Item Cupric Chloride, Dihydrate, USP
CAS Number 10125-13-0Molecular Formula CuCl2.2H2O Molecular Weight 170.48
RESIDUAL SOLVENTS TO PASS TEST NO RESIDUALSOLVENTS USED
Spectrum Chemical Mfg Corp
755 Jersey Avenue
New Brunswick 08901 NJ
All pharmaceutical ingredients are tested using current edition of applicable pharmacopeia.
Read and understand label and MSDS/SDS before handling any chemicals. All Spectrum's chemicals are for manufacturing, processing,repacking or research purposes by experienced personal only. The customer must ensure to provide its users adequate hazardousmaterial training and appropriate protective gears before handling our chemicals.
CuCl2•2H2O F.W. 170.48Assay (CuCl2; Dried Basis) .................................99.0-100.5%Loss on Drying .....................................................20.9-21.4%
MAXIMUM LIMITSSodium ........................................................................ 0.02%Potassium .................................................................... 0.01%Calcium ...................................................................... 0.005%Iron ............................................................................ 0.005%Nickel ........................................................................... 0.01%Insoluble Matter ........................................................... 0.01%Sulfate ........................................................................ 0.005%Residual Solvents ............................................... To pass test
WARNING: This product contains a chemical known to the State of California to cause cancer.
DELIQUESCENT: Keep tightly closed.
Chemical Emergency: (800)424-9300
*49452C1018062233ata*
W 2/D6GHS A Lot No. 062233
C1018 500 G
Cupric ChlorideDihydrate
U.S.P.CAS 10125-13-0
CAUTION: For manufacturing, processing or repacking.Read and understand the label and Safety Data Sheet (SDS) prior to use.
DANGER• Causes severe skin burns and eye damage • Toxic if swallowed.• Do not eat, drink or smoke when using this product • Wear protective gloves, protective clothing, eye protection, face protection • Do not breathe dust • Wash face, hands and any exposed skin thoroughly after handling.FIRST AID: Immediately call a POISON CENTER or physician. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue Rinsing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. Wash contaminated clothing before reuse. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF SWALLOWED: Rinse mouth. DO NOT induce vomiting.
KEEP FROM CHILDRENDOT: UN2802, Copper chloride, 8, PG III, marine pollutant
www.SpectrumChemical.com
DdAa
SPECTRUM CHEMICAL MFG. CORP. Gardena, CA 90248 • New Brunswick, NJ 08901
Empirical Formula, Formula Weight and Technical Specifications Panel
Expiration Information
Lot Number
Kosher Certified by Kosher Supervision of America (KSA).
Bar CodeGHS Hazard PictogramsWarning, Safety Data and Precautionary InformationProduct Catalog NumberItem Name, Form, Grade
Size/Quantity
Chemical Abstracts Service (CAS) Registry Number
Caution Information
DOT Shipping Information
Toll-Free 24-Hour Chemical Emergency Telephone Number
B
K
D
A
I
C
H
F
G
L
E
J
YELLOW: Oxidizer
RED: Flammable
GREEN: General Storage
BLUE: Health Hazard
WHITE: Corrosive
Storage Color Band
This color-coded band indicates the hazard most likely to be posed by that material under storage conditions. The criteria used to assign band colors have been established by the Storage Code working group of the Society for Chemical Hazard Communication (SCHC). It is recommended that like colors be stored together, unless otherwise stated, based on the color codes indicated to the right. However, it is the responsibility of the customer to check with their local fire department for possible conflicts with our recommendations when storing hazardous chemicals.
O
Label Legend
M
N
The Spectrum label presents technical and safety information in an easily understood format. Our technical specialists stay abreast of the latest requirements of the Globally Harmonized System for Classification and Labelling of Chemicals (GHS), as well as the Occupational Safety and Health Administration (OSHA), the Food and Drug Administration (FDA) and other government regulatory agencies in order to ensure compliance, accuracy and concise hazard communication.
G
D
J
H
B
E
F
K
A
M
O
I
Spectrum Chemical Mfg Corp
Corporate Headquarters: West Coast Facility:
769 Jersey Ave. 14422 S. San Pedro St.
New Brunswick, NJ 08901 Gardena, CA 90248
732.214.1300 310.516.8000
Label Information
C
January 26, 2016 RE: Lot Numbering System Dear Valued Customer: This letter is to inform you of Spectrum Chemicals and Laboratory Products’ Lot Numbering System. The system is based on an alpha-numerical sequence which provides the month, year and location of production. The lot numbering system utilized until 2010 is a sequence of six characters, two letters followed by four numbers. The first letter represents the year, for example, Y denotes 2009 and Z denotes 2010. The second letter represents the month and site, for example, A-L denotes January through December at Spectrum’s Gardena, CA facility, while M-X denotes January through December at the New Brunswick, NJ facility. The following four numbers are sequentially assigned.
Example: ZI0928 = The 928th material produced in California in September 2010 The lot numbering system utilized for 2011 and forward, is a sequence of seven characters. The first character, a number, represents the production facility: 1 = Gardena, CA Facility 2 = New Brunswick, NJ Facility 3 = China Facility The second character, a letter, represents the year. For example, A denotes 2011 and B denotes 2012. The third character, a letter, represents the month, with A denoting January and L denoting December. The following four numbers are sequentially assigned.
Example: 2AA0706 = The 706th material produced in New Jersey in January 2011 Thank you for your interest with Spectrum products. Please feel free to contact us at 310-516-8000 or via email at [email protected] if we may be of further assistance. Sincerely,
Michael Dang Manager, GMP Compliance
21.September.2017
Stability – Shelf Life Guidance Product Covered: C1018, Cupric Chloride, Dihydrate, USP Spectrum Chemical’s manufacturing partner has assigned the following shelf life guidance for the product listed above. The product, C1018, Cupric Chloride, Dihydrate, USP, is assigned a 36 months shelf life from date of manufacturing. The quality and integrity of the chemical depends on the handling and storage conditions. Please refer to the Safety Data Sheet for proper storage and handling procedures. Adan R. Hernandez Quality Control Manager
Corporate Headquarters 769 Jersey Avenue New Brunswick, NJ 08901-3605