C Series Carbon Steel Bar Stock Ball Valves NAME/MATERIAL 1. Handle Grip / Vinyl 2. Handle / Carbon Steel Plated 3. Handle Nut / Carbon Steel Plated 4. Packing Bushing / Stainless Steel A276 Type 304 5. Packing / PTFE 6. Stem / Stainless Steel A276 Type 316 7. Thrust Washer / R-PTFE 15% Glass-Filled 8. Seat / R-PTFE 15% Glass-Filled 9. Seat Retainer / Carbon Steel A108 GR 1020 10. Gasket / PTFE 11. Ball / Stainless Steel A351 CF8M (316) 12. Body / Carbon Steel A108 GR.1020 (A105 on 2") 13. Stem Washer / Stainless Steel A276 Type 304 14. Belleville Washer / Stainless Steel 301 15. Spring Washer / Stainless Steel A276 Type 304 • Oval handles optionally available CSSDR-1 Reduced port NPT ends to ANSI B1.20.1 One piece body Blowout-proof stem 2000 p.s.i., W.O.G. Complies with NACE MR-0103 & Supplier Requirements of NACE MR-0175/ISO 15156 1/4" & 3/8" only m D I M E N S I O N S m size 8 10 15 20 25 32 40 50 mm/in 1 /4 3 /8 1 /2 3 /4 1 1 1 /4 1 1 /2 2 A 71.0 85.5 109.47 112.5 112.5 147.50 147.50 154.00 mm/in 2.8 3.37 4.31 4.43 4.43 5.81 5.81 6.06 B 23.90 26.05 32.95 37.25 44.50 48.60 52.55 57.70 mm/in 0.94 1.03 1.30 1.47 1.75 1.91 2.07 2.27 C 43.10 47.35 61.72 69.85 85.73 93.67 101.60 114.30 mm/in 1.70 1.86 2.43 2.75 3.38 3.69 4.00 4.50 D 30.00 33.35 54.41 55.00 61.50 73.50 75.00 85.50 mm/in 1.80 1.31 2.14 2.17 2.62 2.89 2.95 3.37 E 4.60 6.80 9.20 12.50 16.00 20.00 24.70 32.00 mm/in 0.18 0.27 0.36 0.49 0.63 0.79 0.97 1.26 CV 1.5 3.5 5.7 10 16 25 40 62 weights 0.100 0.153 0.315 0.460 0.690 1.439 1.455 2.700 kg/lb 0.220 0.337 0.693 1.012 1.518 3.166 3.201 5.940 PSIG 2000 1500 1000 800 600 400 300 200 150 100 50 0 KPAG 13789 10342 6894 5515 4136 2757 2068 1378 1034 689 344 0 -20 0 50 100 150 200 250 300 350 400 450 500 (ºF) -29 -18 10 38 66 93 121 149 177 204 232 260 (ºC) PRESSURE TEMPERATURE RATING 1 /4" - 2" 100ºF (38ºC) B C D A E • Lockout hole diameter is 8mm 4.1 MAS CA 2015/05/26 Technical data, dimensions, materials & specifications are subject to change without notice.
8
Embed
C Series Carbon Steel Bar Stock Ball Valves CSSDR-1advancedvalve.net/assets/downloads/valves/ball valves/Ball Valves...C Series Carbon Steel Bar Stock Ball Valves NAME/MATERIAL 1.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
MAS CA 31/05/11 Technical data, dimensions, materials & specifications are subject to change without notice.
C SeriesCarbon Steel Bar Stock Ball Valves
N A M E / M A T E R I A L 1. Handle Grip / Vinyl 2. Handle / Carbon Steel Plated 3. Handle Nut / Carbon Steel Plated 4. Packing Bushing / Stainless Steel A276 Type 304 5. Packing / PTFE 6. Stem / Stainless Steel A276 Type 316 7. Thrust Washer / R-PTFE 15% Glass-Filled 8. Seat / R-PTFE 15% Glass-Filled 9. Seat Retainer / Carbon Steel A108 GR 102010. Gasket / PTFE11. Ball / Stainless Steel A351 CF8M (316)12. Body / Carbon Steel A108 GR.1020 (A105 on 2")13. Stem Washer / Stainless Steel A276 Type 30414. Belleville Washer / Stainless Steel 30115. Spring Washer / Stainless Steel A276 Type 304
• Oval handles optionally available
CSSDR-1 Reduced portNPT ends to ANSI B1.20.1One piece bodyBlowout-proof stem2000 p.s.i., W.O.G.Complies with NACE MR-0103 & Supplier Requirements of NACE MR-0175/ISO 15156
1/4" & 3/8" only
m D I M E N S I O N S m size 8 10 15 20 25 32 40 50 mm/in 1/4 3/8 1/2 3/4 1 11/4 11/2 2 A 71.0 85.5 109.47 112.5 112.5 147.50 147.50 154.00 mm/in 2.8 3.37 4.31 4.43 4.43 5.81 5.81 6.06 B 23.90 26.05 32.95 37.25 44.50 48.60 52.55 57.70 mm/in 0.94 1.03 1.30 1.47 1.75 1.91 2.07 2.27 C 43.10 47.35 61.72 69.85 85.73 93.67 101.60 114.30 mm/in 1.70 1.86 2.43 2.75 3.38 3.69 4.00 4.50 D 30.00 33.35 54.41 55.00 61.50 73.50 75.00 85.50 mm/in 1.80 1.31 2.14 2.17 2.62 2.89 2.95 3.37 E 4.60 6.80 9.20 12.50 16.00 20.00 24.70 32.00 mm/in 0.18 0.27 0.36 0.49 0.63 0.79 0.97 1.26 CV 1.5 3.5 5.7 10 16 25 40 62 weights 0.100 0.153 0.315 0.460 0.690 1.439 1.455 2.700 kg/lb 0.220 0.337 0.693 1.012 1.518 3.166 3.201 5.940
P R E S S U R E T E M P E R A T U R E R A T I N G1/4" - 2" 100ºF (38ºC)
BC
D
A
E
• Lockout hole diameter is 8mm
4.1
MAS CA 2015/05/26 Technical data, dimensions, materials & specifications are subject to change without notice.
MAS CA 31/05/11 Technical data, dimensions, materials & specifications are subject to change without notice.
C SeriesCarbon Steel Ball Valves
N A M E / M A T E R I A L CSCR-2 *LSSR-2 1. Handle Grip / Vinyl 2. Handle / Stainless Steel A276 Type 304 3. Locking Device / Stainless Steel A276 Type 304 4. Handle Nut / Stainless Steel A276 Type 304 5. Stem Washer / Stainless Steel A276 Type 304 6. Gland Nut / Carbon Steel A108 7. Packing / PTFE 8. Stem / Stainless Steel A276 Type 316 9. Thrust Washer / R-PTFE 15% Glass-Filled10. Gasket / PTFE11. Ball / Stainless Steel A351-CF8M (316) 12. Body / Cast Steel A216 WCB *(A352 LCC)13. Seat / R-PTFE 15% Glass-Filled14. Cap / Cast Steel A216 WCB *(A352 LCC)
CSCR-2 Large portNPT ends to ANSI B1.20.1Two piece bodyBlowout-proof stemAdjustable packing glandActuator mounting pad2000 p.s.i., W.O.G.Complies with NACE MR-0103 & Supplier Requirements of NACE MR-0175/ISO 15156*Optional; Model LSSR-2 (LCC body/cap) for -50°F/-46°C service is available
• All mounting pads are not tapped, but have reserve holes cast in (except 3/4" and 1" which are dimpled). Recommended tapping sizes are listed for reference only.
P R E S S U R E T E M P E R A T U R E R A T I N G1/4" - 2" 100ºF (38ºC)
m D I M E N S I O N S m size 8 10 15 20 25 32 40 50 mm/in 1/4 3/8 1/2 3/4 1 11/4 11/2 2 A 11.0 12.5 12.5 17.5 20.6 25.0 31.8 38.0 mm/in 0.433 0.492 0.492 0.689 0.866 0.964 1.252 1.496 B 29.3 29.3 29.3 35.9 38.4 48.6 51.4 59.5 mm/in 1.154 1.154 1.154 1.415 1.514 1.913 2.023 2.341 C 58.5 58.5 61.5 79.5 87.5 102 111 136 mm/in 2.303 2.303 2.421 3.130 3.484 4.016 4.370 5.394 D 180.5 180.5 180.5 232.5 232.5 290.0 290.0 313.0 mm/in 7.106 7.106 7.106 9.154 9.154 11.417 11.417 12.323 E 22.0 22.0 22.0 22.0 22.0 22.0 22.0 32.0 mm/in 0.866 0.866 0.866 0.866 0.866 0.866 0.866 1.280 CV 8 10 15 30 40 48 80 108 weights 0.690 0.672 0.671 0.920 1.094 1.705 2.354 2.974 kg/lb 1.521 1.481 1.479 2.028 2.411 3.759 5.190 6.556
4.3
A
C
D
E
�
N A M E / M A T E R I A L 1. Handle Grip / Vinyl 2. Handle / Stainless Steel A276 Type 304 3. Rod / Stainless Steel A276 Type 304 4. Spring / A29 GR.9260 5. Anchor Screw / Stainless Steel A276 Type 304 6. Handle Nut / CS Plated 7. Anchor / Stainless Steel A351 CF8M (316) 8. Gland Nut / Stainless Steel A276 Type 3049a. Packing Washer / PEEK9b. Packing / RPTFE10. Stem / Stainless Steel A276 Type 31611. Thrust Washer / RPTFE12. Gasket / PTFE13. Seat / RPTFE14. Cap / Cast Steel A216 WCB15. Ball / Stainless Steel A351 CF8M (316)16. Body / Cast Steel A216 WCB
MAS CA 2015/05/26 Technical data, dimensions, materials & specifications are subject to change without notice.
CSCR-2-DM Large portNPT ends to ANSI B1.20.1Two piece bodyBlowout-proof stemAdjustable packing glandDeadman handleActuator mounting padComplies with NACE MR-0103 & Supplier Requirements of NACE MR-0175/ISO 151562000 P.S.I. W.O.G.
MAS CA 31/05/11 Technical data, dimensions, materials & specifications are subject to change without notice.
C SeriesCarbon Steel, 250 Steam Rated Ball Valves
N A M E / M A T E R I A L 1. Handle Grip / Vinyl 2. Handle / Stainless Steel A276 Type 304 3. Locking Device / Stainless Steel A276 Type 304 4. Handle Nut / Stainless Steel A276 Type 304 5. Stem Washer / Stainless Steel A276 Type 304 6. Gland Nut / Carbon Steel A108 7. Packing / R-PTFE (TFM-4215) 8. Stem / Stainless Steel A276 Type 316 9. Thrust Washer / R-PTFE (TFM-4215)10. Gasket / R-PTFE (TFM-4215)11. Ball / Stainless Steel A351 CF8M (316) 12. Body / Cast Steel A216 WCB 13. Seat / R-PTFE (TFM-4215)14. Cap / Cast Steel A216 WCB
• All mounting pads are not tapped, but have reserve holes cast in (except 3/4" and 1" which are dimpled). Recommended tapping sizes are listed for reference only.
Saturated Steam
PSIG
2000
1500
1000
800
600
400
300
200
150
100
50
0
KPAG
13789
10342
6894
5515
4136
2757
2068
1378
1034
689
344
0
-20 0 50 100 150 200 250 300 350 400 450 500 (ºF)
-29 -18 10 38 66 93 121 149 177 204 232 260 (ºC)
P R E S S U R E T E M P E R A T U R E R A T I N G1/4" - 2" 100°F (38°C)
P R E S S U R E T E M P E R A T U R E R A T I N G1/4" - 2"
21/2" - 4"
N A M E / M A T E R I A L 1. Handle / Ductile Iron A536 Grade 65-45-12 2. Retainer Spring / Carbon Steel 3. Lockable Stop Plate / Carbon Steel Plated 4. Stem Bearing / Nylon 5. Packing / Viton O-Rings (2) (3 for 3" & 4" sizes) 6. Thrust Washer / R-PTFE 15% Glass-Filled 7. Stem / Stainless Steel A276 Type 316 8. Gasket / Viton O-Ring (1) 9. Cap / Cast Steel A216 WCB10. Seat / R-PTFE 15% Glass-Filled 11. Ball / Stainless Steel A351-CF8M (316) 12. Body / Cast Steel A216 WCB13. Spring & Pin / Stainless Steel A276 Type 30414. Screw / Carbon Steel A307
anti-static design
** • Mounting pads on 2" are tapped. All others have reserve holes. Recommended tapping sizes listed in (K) are for reference only (1/4" & 3/8" are not provided with mounting pads).
CSS-F-2/CSS-R-2 Full portNPT to ANSI B1.20.1Full sealwelded 2 piece bodyBlowout-proof stemAnti-static deviceLocking deviceActuator mounting pad3000 PSI, W.O.G. 1/4" to 2"2000 PSI, W.O.G. 21/2" to 4"Complies with NACE MR-0103 & Supplier Requirements of NACE MR-0175/ISO 15156Optional 2" CSS-R-2 large port
CSSF-2 *CSSR-2
MAS CA 09/24/13 Technical data, dimensions, materials & specifications are subject to change without notice.MAS CA 2015/05/26 Technical data, dimensions, materials & specifications are subject to change without notice.
MAS CA 31/05/11 Technical data, dimensions, materials & specifications are subject to change without notice.
MAS CA 2015/05/26 Technical data, dimensions, materials & specifications are subject to change without notice.
MAS CA 31/05/11 Technical data, dimensions, materials & specifications are subject to change without notice.
C SeriesCarbon Steel 3 Piece Ball Valves
3"1000WOG
0696
N A M E / M A T E R I A L 1. Handle Grip/ Vinyl 2. Handle / Stainless Steel A276 Type 304 3. Locking Device / Stainless Steel A276 Type 304 4. Handle Nut /Stainless Steel A276 Type 304 5. Stem Washer / Stainless Steel A276 Type 304 6. Gland Nut / Carbon Steel A108 7. Packing / PTFE 8. Stem / Stainless Steel A276 Type 316m 9. Thrust Washer / R-PTFE 15% Glass-Filled 10. Gasket / PTFE11. Hex Nut / Carbon Steel A194 Grade 2HM12. Bolt / Carbon Steel A193 Grade B7M13. Ball / Stainless Steel A351 - CF8M (316)m 14. Body / Cast Steel A216 - WCB 15. Seat / R-PTFE 15% Glass-Filled16. Cap / Cast Steel A216 - WCB
FØE
J
I
1/4" to 11/4"
11/2" to 3"
CSS-F-3N-SW Full portSocket Weld ends to ANSI B16.11Three Piece bodyBlowout-proof stemAdjustable packing nutLocking lever handleISO 5211 mounting padComplies with NACE MR-0103 & Supplier Requirements of NACE MR-0175/ISO 15156Floating ball2000 PSI, W.O.G. 1/4" to 1"1500 PSI, W.O.G. 11/4" to 3"CSS-F-3N-BW (butt-weld) available on request