Standard Type J K M R A N SW G D E T L H C F DB Part Number COUPLINGS Lifting & Lashing Points For Bolting VLBG - Plain Bearing Load Ring MATERIAL: •Body: EN1677 Grade 8, surface pink powder coated INFLUENCE OF TEMPERATURE When using the VLBG in over heated areas, the WLL has to be reduced as follows, based upon the strength of the bolts: 100° up 200° - 15% - (212°F to 392°F) 200° up 250° - 20% - (392°F to 482°F) 250° up 350° - 25% - (482°F to 662°F) Temperatures exceeding 350°C (662°F) are not recommended P R E C I S I O N 0.30 0.63 1.00 1.50 2.50 4.00 4.00 5.00 7.00 8.00 10.00 15.00 20.00 30 30 32 33 50 50 60 60 60 77 75 95 95 54 54 54 56 82 82 103 103 103 122 145 156 156 34 34 34 36 54 54 65 65 65 82 80 100 100 35 36 37 46 55 58 78 80 72 100 103 113 117 40 39 38 39 55 66 69 67 74 97 64 110 105 10.00 10.00 10.00 13.50 16.50 18.00 22.50 22.50 22.50 26.50 30x20 36.00 36.00 29 29 29 36 43 43 61 61 55 77 77 87 87 11 16 21 24 32 37 39 49 52 63 73 63 73 76 96 116 149 187 222 - 279 - 223 273 263 303 WLL (t) A B C D E F G H Std. H Long VLBG-M8 VLBG-M10 VLBG-M12 VLBG-M16 VLBG-M20 VLBG-M24 VLBG-M27 VLBG-M30 VLBG-7T-M36* VLBG-8T-M36 VLBG-10T-M42 VLBG-15T-M42 VLBG-M48 VLBG-M8/LONG VLBG-M10/LONG VLBG-M12/LONG VLBG-M16/LONG VLBG-M20/LONG VLBG-M24/LONG - VLBG-M30/LONG - VLBG-8T-M36/LONG VLBG-10T-M42/LONG VLBG-15T-M42/LONG VLBG-M48/LONG Ringbolt Standard Ringbolt Long * Special design, bolt cannot be removed. All dimensions are in mm B FEATURES AND RECOMMENDATIONS •Will turn 360° •Adjustable in pull direction •Load ring foldable •Full WLL in any load direction •Surface pink powder coated •Only use bolts recommended by manufacturer •100% crack detected •Outer and inner hexhead bolt for universal tool use •Surface protection: CORRUD-DT-min. 20 x better corrosion protection than zinc plated (except spot face after cutting to a special length). •Thread over whole bolting length “H” +44 (0)1246 261300 +44 (0)1246 261688 WLL = Working Load Limit Each lifting product is rated with a working load limit with a safety factor of 4 from the worst angle of lift. This means the product will break at more than 4 times the WLL (for multi leg lifts please consult sales).
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Standard Type
J K
M
R
A
N
SW
G D
ET
LH
C F
DB
Part Number
COUPLINGSLifting & Lashing Points For BoltingVLBG - Plain Bearing Load Ring
MATERIAL:•Body: EN1677 Grade 8, surface pink powder coatedINFLUENCE OF TEMPERATURE
When using the VLBG in over heated areas, the WLL has tobe reduced as follows, based upon the strength of the bolts:100° up 200° - 15% - (212°F to 392°F)200° up 250° - 20% - (392°F to 482°F)250° up 350° - 25% - (482°F to 662°F)Temperatures exceeding 350°C (662°F) are not recommended
•Will turn 360°•Adjustable in pull direction•Load ring foldable•Full WLL in any load direction•Surface pink powder coated•Only use bolts recommended by manufacturer
•100% crack detected•Outer and inner hexhead bolt for universal tool use•Surface protection: CORRUD-DT-min. 20 x better
corrosion protection than zinc plated (except spotface after cutting to a special length).
•Thread over whole bolting length “H”
�+44 (0)1246 261300 � +44 (0)1246 261688
WLL = Working Load LimitEach lifting product is rated with a working load limit with a safety factor of 4 from the worst angle of lift.This means the product will break at more than 4 times the WLL (for multi leg lifts please consult sales).
COUPLINGSLifting & Lashing Points For Bolting
Plain Bearing Load Ring - VLBGP R ECISIO
N
75757587
113130151151151205170230230
454545476478808080
11080
130130
404550607580
100110107140150150160
105125145185230265
-340
-300350350390
8101216202427303636424248
568
101214-
17-
22242427
13171924303641465555656575
3232323848486767678585
100100
75757585
110125147147146197162222222
24242630454560606070708585
0.300.320.330.551.301.503.103.103.305.806.40
11.2011.20
30 60
100 150 250 400 400 500 700 800
1000 1500 2000
J KL
Std.L
Long M N SW R T DBWeight
kgTorque
Nm£52.54£52.83£53.20£60.37£61.01£65.89£98.30
£121.56£122.81£232.12£245.54£292.80£316.11
£62.69£62.92£63.53£60.37£74.11£80.15
-£145.63
-£282.21£307.91£356.07£384.36
Price 1 offRingboltStandard
RingboltLong
All dimensions are in mm
90° 90°
Hmax.
Lmax.
StandardLength
LongLength
FEATURES AND RECOMMENDATIONS (CONT.) •Bolt is held captive in body and should only be
replaced with the same quality class bolt•Clear identification at the bolt head with thread size
and quality class•Provide plain bolting surface. The bolted ring must
be free to turn 360°
•Load ring has to be adjusted in pull direction, freeto move and must not support on edges
•The lifting attachment must be free to move whenattached to the load ring
•Regular inspections should always be carried outby qualified personnel
WLL = Working Load LimitEach lifting product is rated with a working load limit with a safety factor of 4 from the worst angle of lift.This means the product will break at more than 4 times the WLL (for multi leg lifts please consult sales).
ImportantLateral forces with standard eye bolts acc. to DIN580 are forbidden. In case of multiple leg suspensions 2-leg and 3⁄4-leg the ring plane of the eye bolt eyes must be the direction of pull. This cannot be guaranteedwhen standard eye bolts are tightened.
This is only possible with the Starpoint eye bolt, because it can be adjusted in pull direction in thetightened position.
Fitting and Adjusting the VRSF Starpoint:
Shape: Star shaped – clear distinction from standard eye bolt DIN 580Colour: Fluorescent pink powder coatingMarking: Clear indication of WLL (in metric tons and lbs) for side load direction F
(not allowed with standard eye bolt).
Type VRSF includes the locking device/Star key. The Starpoint is delivered with an intergrated installationtool. The tool should be engaged into the hexagon socket screw and tightened by the hand-disengage tool.The Starpoint is then adjustable 360°.
Eye bolt DIN 580-M20 Starpoint VRSF-M20
M20
1200kg 6000kg90°
2300kg
2300kg
M20
VRSF Fixed VRSF Adjustable
COUPLINGSLifting & Lashing Points For BoltingPP-S - PowerPoint Star
MATERIAL:•Body: EN1677 Grade 8
P R ECISIO
N
�+44 (0)1246 261300 � +44 (0)1246 261688
FEATURES AND RECOMMENDATIONS
•All parts are either 100% crack detected or proofloaded according to EN 1677
•All original bolts are 100% crack detected•Design factor 4:1 in any direction•With double ball bearings, for tilting, twisting and
turning without jerks•Suitable for all sling systems, either hook, eye or
loop•Non-protruding hook tip•Forged safety latch, engages in the tip of the hook
therefore protected against lateral bending•Coiled double leg corrosion protected spring
•Thickened tip of the hook prevents handling,malpractices, and resists bending
•Wearing edges on both sides and gauges forchecking hook openings
•Will turn 360°•180° pivoting•Available to purchase as separate components. See
"Separate components" page for further details
C
M
D
B
E
H
SW
G
F
A
WLL(t) A B C D E
F†
Std. G H M SWWeight
kg Torque 0.631.502.504.005.008.00
132028363749
7597
126150174208
182530354048
4046617895
100
116147187227267310
182530364554
4150617793
102
344050627784
121620243036
364155708590
0.41.01.73.57.29.2
PP-S-M12PP-S-M16PP-S-M20PP-S-M24PP-S-M30PP-S-M36
PartNumber
Price1 off
£72.78£91.67
£115.12£161.80£236.28£373.90
Han
d t
ight
with
sp
anne
r
All dimensions are in mm
† Longer thread lengths are available upon request.
WLL = Working Load LimitEach lifting product is rated with a working load limit with asafety factor of 4 from the worst angle of lift. This means theproduct will break at more than 4 times the WLL (for multileg lifts please consult sales).
COUPLINGSLifting & Lashing Points For Bolting
PowerPoint Ring Connection - PP-BMATERIAL:•Body: EN1677 Grade 8
•All parts are either 100% crack detected or proofloaded according to EN 1677
•All original bolts are 100% crack detected•Design factor 4:1 in any direction•Ring connection for hook assemblies•With double ball bearings, for tilting, twisting and
turning without jerks•Suitable for all sling systems; hook, eye or loop•Will turn 360°•180° pivoting•Available to purchase as separate components. See
"Separate components" page for further details
C
M
D
B
E
SW
G
F
A
All dimensions are in mm
WLL = Working Load LimitEach lifting product is rated with a working load limit with asafety factor of 4 from the worst angle of lift. This means theproduct will break at more than 4 times the WLL (for multileg lifts please consult sales).
COUPLINGSLifting & Lashing Points For WeldingWPP-S - PowerPoint Universal Connection
•Features double ball bearing•360° swivelling•WPP-S range is the universal connection for round
slings, wire ropes, hook and ring assemblies•Available to purchase as separate components. See
"Separate components" page for further details
C
D
B
E
G
A
All dimensions are in mm
WLL = Working Load LimitEach lifting product is rated with a working load limit with asafety factor of 4 from the worst angle of lift. This means theproduct will break at more than 4 times the WLL (for multileg lifts please consult sales).
WLL = Working Load LimitEach lifting product is rated with a working load limit with asafety factor of 4 from the worst angle of lift. This means theproduct will break at more than 4 times the WLL (for multileg lifts please consult sales).
COUPLINGSLifting & Lashing Points For WeldingLBS - Load Ring
MATERIAL:•Body: Forged, 1.0570 (St52-3) to DIN 18800•Suspension Ring: Forged, acc. to EN1677, grade 8
Red in colour
P R ECISIO
N
�+44 (0)1246 261300 � +44 (0)1246 261688
FEATURES AND RECOMMENDATIONS
•Easy and quick to weld assembly•Compact design•High dynamic and static strength•Forged suspension ring acc. to EN 1677, grade 8,
electromagnetic crack detected, painted red; meetsthe requirements of the appropriate safety authorities
•The welding block has been forged of material1.0570 (St 52-3) and clearly stamped with thepermissible WLL. The patented distance lugs assistin achieving the correct root weld
•Important: The special weld design (continuous HV),the requirements of DIN 18800 are fulfilled, eg: aclosed weld avoids corrosion and thus suitable foroutdoor use
•Distinctive features for type LBS: A protected springkeeps the load ring in every required position. Theparts are connected in such a way that they remaincaptive. *Only LBS-15T does not have this
•The spring prevents unwanted noise occurring as aresult of vibration
LBS-1TLBS-3TLBS-5TLBS-8TLBS-10TLBS-15T*
PartNumber
WLL(t) A B C D E ØF G H
WeldHV+
Weightkg
Price1 off£18.77£21.29£45.57£74.45£83.41
£117.41
1358
1015
324261757096
6585
110118146180
3650656580
100
253144555169
3950726690
100
13.5016.5022.5026.5030x2033x22
334660607090
85108155168190230
HV5+3HV8+3
HV12+4HV16+4HV17+4HV25+6
0.30.61.62.53.26.0
Note: All lifting points can also be used as lashing points.The permissible pull force is double the nominal WLL. Design factor for load securing is 2:1.Eg. = LBS-1T – lifting of 1t WLL, as lashing point 2000 daN permitted. Pull force, ≈ LC = lashing capacity.
C ØF
D
T
A HV
180° Pivoting
Locking Spring
Weld Arrangement:
Distance Lugs
E
D
G
B H
All dimensions are in mm
WLL = Working Load LimitEach lifting product is rated with a working load limit with asafety factor of 4 from the worst angle of lift. This means theproduct will break at more than 4 times the WLL (for multileg lifts please consult sales).