C H A P T E R 4 AMPLITUDE MODULATIONS AND DEMODULATIONS Fundamental of Communication Systems ELCT332 FALL2011
Feb 04, 2016
C H A P T E R 4
AMPLITUDE MODULATIONS AND DEMODULATIONS
Fundamental of Communication Systems ELCT332 FALL2011
Fundamental of Communication Systems ELCT332 FALL2011 2
Baseband Communications: Message signals are directly transmitted without any modification.
Carrier Communications: Uses modulation to shift the frequency spectrum of a signal
Amplitude Modulation (AM)Frequency Modulation (FM)Phase Modulation (PM)
Modulation
Amplitude modulation: Amplitude A(t) is proportional to m(t)Frequency modulation: Frequency is proportional to m(t)Phase modulation: Phase is proportional to m(t)
Double-sideband, suppressed carrier (DSB-SC) modulation and demodulation.
Fundamental of Communication Systems ELCT332 FALL2011 3
DSB-SC Modulation and Demodulation
=
Modulation
Demodulation
Example of DSB-SC modulation.
Fundamental of Communication Systems ELCT332 FALL2011 4
Example
For a baseband signal , find the DSB-SC signal, and identify USB/LSB
Nonlinear DSB-SC modulator.
Fundamental of Communication Systems ELCT332 FALL2011 5
Modulators
Multiplier modulators: Output is proportional to the product of two input signals.
Nonlinear modulators: Achieved by nonlinear devices.
Switching modulator for DSB-SC.
Fundamental of Communication Systems ELCT332 FALL2011 6
Switching modulators: multiplying m(t) by any periodic signal of the fundamental radian frequency ωc
(a) Diode-bridge electronic switch. (b) Series-bridge diode modulator. (c) Shunt-bridge diode modulator.
Fundamental of Communication Systems ELCT332 FALL2011 7
Diode Bridge Modulator
Multiplication of a signal by a square pulse train is in reality a switching operation
Ring modulation.
Fundamental of Communication Systems ELCT332 FALL2011 8
Ring Modulator
Double Balanced Modulator
Frequency mixer or converter.
Fundamental of Communication Systems ELCT332 FALL2011 9
Example: Heterodyning Frequency mixing/conversion
Sub-heterodyning
Super-heterodyning
AM signal and its envelope.
Fundamental of Communication Systems ELCT332 FALL2011 10
Amplitude Modulation (AM)
DSB-SC demodulation requires the receiver to possess a carrier signal that is synchronized with the incoming carrier.
Condition for envelope detection: A+m(t)≥0 for all t
Tone-modulated AM: (a) µ = 0.5; (b) µ = 1.
Fundamental of Communication Systems ELCT332 FALL2011 11
Tone Modulation
Message Signals m(t) with Zero Offsetmmin=-mmax
Modulation index
Message Signals m(t) with Zero Offsetmmin≠-mmax
Rectifier detector for AM.Fundamental of Communication Systems ELCT332 FALL2011 12
Sideband and Carrier PowerDemodulation of AM Signals
Rectifier
Envelope detector for AM.
Fundamental of Communication Systems ELCT332 FALL2011 13
Envelope Detector
(a) Original message spectrum and (b) the redundant bandwidth consumption in DSB modulations.
Fundamental of Communication Systems ELCT332 FALL2011 14
Bandwidth-Efficient Amplitude Modulations
For a baseband signal m(t) with bandwidth B Hz, DSB modulations require twice the RF bandwidth of transmit
To Improve the spectral efficiency of AM•Single-side (SSB) modulation
• Remove either LSB or USB•Quadrature amplitude modulation (QAM)
• Sending two messages over the same bandwidth of 2B Hz.
SSB spectra from suppressing one DSB sideband.
Fundamental of Communication Systems ELCT332 FALL2011 15
Amplitude Modulation: Single Sideband (SSB)
Bandpass filtering
Transfer function of an ideal π/2 phase shifter (Hilbert transformer).
Fundamental of Communication Systems ELCT332 FALL2011 16
Hilbert Transform
Expressing SSB spectra in terms of M+(f ) and M−(f ).
Fundamental of Communication Systems ELCT332 FALL2011 17
Representation of SSB Signals
SSB spectra for tone modulation.
Fundamental of Communication Systems ELCT332 FALL2011 18
Tone Modulation: SSB
Using the phase-shift method to generate SSB.
Fundamental of Communication Systems ELCT332 FALL2011 19
SSB Modulation Systems
Phase shift method
(a) Relative power spectrum of speech signal and (b) the corresponding USB spectrum.
Fundamental of Communication Systems ELCT332 FALL2011 20
Selective filtering method
SSB Modulation Systems
Weaver’s method
Two step modulation•Smaller carrier frequency f first to widen the SSB signal
Fundamental of Communication Systems ELCT332 FALL2011 21
Quadrature Ampltude Modulation (QAM)
QAM offers an attractive to SSB-SC. It can be exactly generated without requiring sharp cutoff bandpass filters.
𝑥1ሺ𝑡ሻ= 2𝜑𝑄𝐴𝑀ሺ𝑡ሻ𝑐𝑜𝑠𝜔𝑐𝑡 = 𝑚1ሺ𝑡ሻ+𝑚1ሺ𝑡ሻ𝑐𝑜𝑠2𝜔𝑐𝑡+𝑚2ሺ𝑡ሻ𝑠𝑖𝑛2𝜔𝑐𝑡
𝑥2ሺ𝑡ሻ= 2𝜑𝑄𝐴𝑀ሺ𝑡ሻ𝑠𝑖𝑛𝜔𝑐𝑡= 𝑚2ሺ𝑡ሻ−𝑚2ሺ𝑡ሻ𝑐𝑜𝑠2𝜔𝑐𝑡+𝑚1ሺ𝑡ሻ𝑠𝑖𝑛2𝜔𝑐𝑡
𝑥1ሺ𝑡ሻ= 2𝜑𝑄𝐴𝑀ሺ𝑡ሻcos(𝜔𝑐𝑡+𝜃)= 𝑚1ሺ𝑡ሻ𝑐𝑜𝑠𝜃−𝑚2ሺ𝑡ሻ𝑠𝑖𝑛𝜃+𝑚1ሺ𝑡ሻ(𝑐𝑜𝑠2𝜔𝑐𝑡+𝜃) + 𝑚2ሺ𝑡ሻsin(2𝜔𝑐𝑡+𝜃)
Cochannel Interference
Spectra of the modulating signal and corresponding DSB, SSB, and VSB signals.
Fundamental of Communication Systems ELCT332 FALL2011 22
Vestigial Sideband (VSB)
VSB modulation system, also called asymmetric sideband, is a comprise between DSB and SSB. VSB signals are relatively easy to generate, and their bandwidth is some what greater than that of SSB signals.
VSB modulator and demodulator.
Fundamental of Communication Systems ELCT332 FALL2011 23
Vestigial Sideband (VSB): Modulator and Demodulator
VSB modulator and receiver filters.
Fundamental of Communication Systems ELCT332 FALL2011 24
Example:
The carrier frequency of a certain VSB signal is fc=20kHz, and the baseband signal bandwidth is 6kHz. The VSB shaping filter Hi(f) at the input, which cuts off the lower sideband gradually over 2kHz, is shown in (a). Find the output filter Ho(f) required for distortionless reception.
Transmitter filter HT (f), receiver front-end filter HR(f ),and the receiver output low-pass filter Ho(f ) in VSB Television systems.
Fundamental of Communication Systems ELCT332 FALL2011 25
VSB Television System
Television signal spectra: (a) DSB video signal plus audio; (b) signal transmitted.
VSB bandwidth: 6MHz
L-carrier hierarchical long-haul analog telephone frequency division multiplexing system.
Fundamental of Communication Systems ELCT332 FALL2011 26
Frequency Division Multiplexing (FDM)
Several signals share the band of a channel, each signal is modulated by different carrier frequency. The various carriers are separated to avoid overlap. These carriers are referred as subcarriers.
Phase-locked loop and its equivalent circuit.
Fundamental of Communication Systems ELCT332 FALL2011 27
Phase-Locked Loop (PLL)
A device typically used to track the phase and the frequency of the carrier component of an incoming signal.
Basic PLL Operation
• VCO is a an oscillator whose frequency can be linearly controlled by an input voltage
• The multiplier output is further filtered by the loop filter and then applied to the input of the VCO
• The voltage changes the frequency of the VCO and keeps the loop locked by forcing the VCO output to track the face of the input signal
Generation of coherent demodulation carrier using signal squaring.
Fundamental of Communication Systems ELCT332 FALL2011 28
Carrier Acquisition in DSB-SC
Signal-Squaring Method
𝑥ሺ𝑡ሻ= ሾ𝑚ሺ𝑡ሻ𝑐𝑜𝑠𝜔𝑐𝑡ሿ2 = 12𝑚2ሺ𝑡ሻ+ 12𝑚2ሺ𝑡ሻ𝑐𝑜𝑠2𝜔𝑐𝑡
12𝑚2ሺ𝑡ሻ= 𝑘+𝜙(𝑡)
𝑥ሺ𝑡ሻ= 12𝑚2ሺ𝑡ሻ+ 𝑘𝑐𝑜𝑠2𝜔𝑐𝑡+𝜙(𝑡)𝑐𝑜𝑠2𝜔𝑐𝑡
Costas phase-locked loop for the generation of a coherent demodulation carrier.
Fundamental of Communication Systems ELCT332 FALL2011 29
Carrier Acquisition in DSB-SC
Costas Loop
Figure 4.31 Effect of the number of picture elements on resolution. (a) Poor resolution (b) Better resolution.
Fundamental of Communication Systems ELCT332 FALL2011
Figure 4.32 Scanning pattern (raster).
Fundamental of Communication Systems ELCT332 FALL2011
Figure 4.33 (a) Horizontal deflection signal. (b) Vertical deflection signal.
Fundamental of Communication Systems ELCT332 FALL2011
Figure 4.34 Television video signal.
Fundamental of Communication Systems ELCT332 FALL2011
Figure 4.35 (a) Television transmitter.
Fundamental of Communication Systems ELCT332 FALL2011
Figure 4.35 (b) Television receiver.
Fundamental of Communication Systems ELCT332 FALL2011 35