C-19-0401 - lincoln.ne.gov

Tracking No. 19050134

CONTRACT DOCUMENTS

CITY OF LINCOLN/LANCASTER COUNTY NEBRASKA

Annual Supply Skid Steer Loader Rentals

Bid No. 19-088

Hamilton Equipment Co. 8801 Highway 6

Lincoln, NE 68507 (402) 464-6381

C-19-0401


2 | P a g e

CITY OF LINCOLN/LANCASTER COUNTY, NEBRASKA

CONTRACT TERMS THIS CONTRACT, made and entered into by and between Hamilton Equipment Co., 8801 Highway 6, Lincoln, NE 68507, hereinafter called “Contractor”, and the City of Lincoln, Nebraska, a municipal corporation, and the County of Lancaster, Nebraska, a political subdivision of the State of Nebraska, hereinafter called the “Owners”. WHEREAS, the Owner has caused to be prepared, in accordance with law, Specifications, Plans, and other Contract Documents for the Work herein described, and has approved and adopted said documents and has caused to be published an advertisement for and in connection with said Work, to-wit:

Skid Steer Loader Rentals, Bid No. 19-088 and, WHEREAS, the Contractor, in response to such advertisement, has submitted to the Owners, in the manner and at the time specified, a sealed Proposal/Supplier Response in accordance with the terms of said advertisement; and, WHEREAS, the Owners, in the manner prescribed by law has publicly opened, read aloud, examined, and canvassed the Proposals/Supplier Responses submitted in response to such advertisement, and as a result of such canvass has determined and declared the Contractor to be the lowest responsible bidder for the said Work for the sum or sums named in the Contractor's Proposal/Supplier Responses, a copy thereof being attached to and made a part of this Contract; NOW, THEREFORE, in consideration of the sums to be paid to the Contractor and the mutual covenants herein contained, the Contractor and the Owners have agreed and hereby agree as follows:

1. The Contractor agrees to (a) furnish all tools, equipment, supplies, superintendence, transportation, and other accessories, services, and facilities; (b) furnish all materials, supplies, and equipment specified to be incorporated into and form a permanent part of the complete work; (c) provide and perform all necessary labor in a substantial and workmanlike manner and in accordance with the provisions of the Contract Documents; and (d) execute and complete all Work included in and covered by the Owners’ award of this Contract to the Contractor, such award being based on the acceptance by the Owner of the Contractor's Proposal, or part thereof, as follows:

Agreement to Line Items 3.1 – 3.4, 4.1 – 4.10 and 5.1 – 5.3 including Attachment A 2. The Owners agree to pay to the Contractor for the performance of the Work embraced in this

Contract, the Contractor agrees to accept as full compensation therefore, the following sums and prices for all Work covered by and included in the Contract award and designated above, payment thereof to be made in the manner provided by the Owners:

The Owners will pay for products/service, according to the Line Item pricing as listed in Contractors Proposal/Supplier Response, a copy thereof being attached to and made a part of this Contract. The Owners shall order on an as- needed basis for the duration of


3 | P a g e

the contract. The cost of products or services for City Departments shall not exceed $65,200.00 during the contract term without approval by the City of Lincoln. The cost of products or services for County agencies shall not exceed $5,375.00 during the contract term without approval by the Board of Commissioners.

3. Equal Employment Opportunity. In connection with the carrying out of this project, the

contractor shall not discriminate against any employee or applicant for employment because of race, color, religion, sex, national origin, ancestry, disability, age or marital status. The Contractor will take affirmative action to ensure that applicants are employed, and that employees are treated during employment, without regard to their race, color, religion, sex, national origin, ancestry, disability, age or marital status. Such action shall include, but not be limited to, the following: employment, upgrading, demotion or transfer; recruitment or recruitment advertising; layoff or termination; rates of pay or other compensation; and selection for training, including apprenticeship.

4. E-Verify. In accordance with Neb. Rev. Stat. 4-108 through 4-114, the contractor agrees to

register with and use a federal immigration verification system, to determine the work eligibility status of new employees performing services within the state of Nebraska. A federal immigration verification system means the electronic verification of the work authorization program of the Illegal Immigration Reform and Immigrant Responsibility Act of 1996, 8 U.S.C. 1324 a, otherwise known as the E-Verify Program, or an equivalent federal program designated by the United States Department of Homeland Security or other federal agency authorized to verify the work eligibility status of a newly hired employee pursuant to the Immigration Reform and Control Act of 1986. The Contractor shall not discriminate against any employee or applicant for employment to be employed in the performance of this section pursuant to the requirements of state law and 8 U.S.C.A 1324b. The contractor shall require any subcontractor to comply with the provisions of this section.

5. Termination. This Contract may be terminated by the following: 5.1) Termination for Convenience. Either party may terminate this Contract upon thirty (30)

days written notice to the other party for any reason without penalty. 5.2) Termination for Cause. The Owners may terminate the Contract for cause if the

Contractor: 5.2.1) Refuses or fails to supply the proper labor, materials and equipment necessary to

provide services and/or commodities. 5.2.2) Disregards Federal, State or local laws, ordinances, regulations, resolutions or

orders. 5.2.3) Otherwise commits a substantial breach or default of any provision of the

Contract Document. In the event of a substantial breach or default the Owners will provide the Contractor written notice of said breach or default and allow the Contractor ten (10) days from the date of the written notice to cure such breach or default. If said breach or default is not cured within ten (10) days from the date of notice, then the contract shall terminate.

6. Independent Contractor. It is the express intent of the parties that this contract shall not create

an employer-employee relationship. Employees of the Contractor shall not be deemed to be employees of the Owners and employees of the Owners shall not be deemed to be employees of the Contractor. The Contractor and the Owners shall be responsible to their respective employees for all salary and benefits. Neither the Contractor’s employees nor the Owners’ employees shall be entitled to any salary, wages, or benefits from the other party, including but not limited to overtime, vacation, retirement benefits, workers’ compensation, sick leave or injury


4 | P a g e

leave. Contractor shall also be responsible for maintaining workers’ compensation insurance, unemployment insurance for its employees, and for payment of all federal, state, local and any other payroll taxes with respect to its employees’ compensation.

7. Owner Inclusion. It is understood and agreed by all parties that “Owner/s” shall include the City

of Lincoln and Lancaster County, Nebraska. Whenever in the Contract documents, including the instructions to bidders, specifications, insurance requirements, bonds, and terms and conditions or any other documents which are a part of the Contract, a singular entity is referenced (i.e., “the City” or “the County”) it shall mean the “Owners” encompassing the City of Lincoln, and Lancaster County. Notwithstanding the foregoing, the duties and obligations of the City, the County, and the Building Commission pursuant to the Contract shall be treated as divisible and severable duties and obligations, and default by any one of the City, the County, or the Building Commission shall not be attributed to any other of the Owners, but shall remain the sole obligation of the defaulting entity.

8. Period of Performance. This Contract shall be effective July 1, 2019 through June 30, 2020.

The term of the Contract shall be a one (1) year term with the option to renew for three (3) additional one (1) year terms.

9. Notwithstanding anything contrary to the Contract Terms, the attached documents comprise the

Contract, and consist of the following: 1. Contract Terms 2. Accepted Proposal/Supplier Response 3. Attachment A 4. Addendums 1 - 3 5. Special Provisions 6. Specifications 7. Instructions to Bidders 8. Sales Tax Exemption Form 13 (Note: This form cannot be used for the WATER Division of the City of Lincoln. The WATER Division is taxable per Reg. 066.14A or applicable laws.) 9. Notice to Bidders

The herein above mentioned Contract Documents form this Contract and are a part of the

Contract as if hereto attached. Said documents which are not attached to this document may be viewed at: lincoln.ne.gov - Keyword: Bid - Awarded or Closed bids.

The Contractor and the Owners hereby agree that all the terms and conditions of this Contract shall be binding upon themselves, and their heirs, administrators, executors, legal and personal representatives, successors, and assigns. IN WITNESS WHEREOF, the Contractor and the Owners do hereby execute this contract upon completion of signatures on: Vendor Signature Page

City of Lincoln Signature Page Lancaster County Signature Page

Tracking No. l'-)()t)01':M

Vendor Signature Page

IF A CORPORATION:

Attest:

Secretary

CONTRACTAnnual Supply

Skid Steer Leader RentalsBid No. 19-088

City of Lincoln and Lancaster CountyHamilton Equipment Co.

EXECUTION BY CONTRACTOR

Seal

/6/M//&/") /-l/UlPmCfTt ^,-n.G

Name of Corporati6fi ' l -•

Zg0\ HUJH <£ , Unroln / A^- ^/T^7Address /, ///^

^By: ^Dub/XltKorlzed Official

^^Cn'Th-jrrwrcJ - V'it.C. PFCS'JC^Legal Title of Official

IF OTHER TYPE OF ORGANIZATION:Name of Organization

Type of Organization

Address

By:.Member

By:.Member

IF AN INDIVIDUAL:Name

Address

Signature

5 | P a g (-•


6 | P a g e

City of Lincoln Signature Page

_______________________________________________________________________________

CONTRACT Annual Supply

Skid Steer Loader Rentals Bid No. 19-088

City of Lincoln and Lancaster County Hamilton Equipment Co.

EXECUTION BY THE CITY OF LINCOLN, NEBRASKA

ATTEST: ___________________________________ City Clerk

CITY OF LINCOLN, NEBRASKA __________________________________________ Mayor

Approved by Executive Order No._______________ dated _____________________________________


7 | P a g e

Lancaster County Signature Page

________________________________________________________________________________

CONTRACT Annual Supply

Skid Steer Loader Rentals Bid No. 19-088

City of Lincoln and Lancaster County Hamilton Equipment Co.

EXECUTION BY LANCASTER COUNTY, NEBRASKA

The Board of County Commissioners of Lancaster, Nebraska

______________________________________

______________________________________

______________________________________

______________________________________

______________________________________

dated _________________________________

Contract Approved as to Form:

______________________________________ Deputy Lancaster County Attorney

C-19-0401

19-088 Addendum 3 - Hamilton Equipment Co - Page 1 of 10

City of Lincoln/Lancaster County (Lincoln Purchasing)Supplier Response

Bid Information Contact Information Ship to Information

Bid Creator Sharon Mulder Asst Address Purchasing AddressPurchasing Agent 440 S. 8th St.

Email [email protected] Lincoln, NE 68508Phone (402) 441-7428 Contact Sharon Mulder Asst ContactFax (402) 441-6513 Purchasing Agent

DepartmentBid Number 19-088 Addendum 3 Department BuildingTitle Annual Skid Steer Loader Building

Rentals Suite 200 Floor/RoomBid Type Bid Floor/Room TelephoneIssue Date 3/8/2019 05:13 PM (CT) Telephone (402) 441-7428 FaxClose Date 3/29/2019 12:00:00 PM (CT) Fax (402) 441-6513 Email

Email [email protected]

Supplier Information

Company Hamilton Equipment CoAddress 8801 Highway 6

Lincoln, NE 68507Contact Brian MotschenbacherDepartmentBuildingFloor/RoomTelephone (402) 464-6381Fax (402) 464-5989Email [email protected] 3/29/2019 09:32:17 AM (CT)Total $74,850.00

By submitting your response, you certify that you are authorized to represent and bind your company.

Signature Brian Motschenbacher Email [email protected]

Supplier Notes

Bid Notes

Added addendum 2

Bid Activities

Bid Messages

Bid Attributes


Please review the following and respond where necessary# Name Note Response

1 Instructions to Bidders I acknowledge reading and understanding the Instructions Yesto Bidders.

2 Specifications I acknowledge reading and understanding the Yesspecifications.

3 Sample Contract I acknowledge reading and understanding the sample Yescontract.

4 Special Provision Term Contract Provisions I acknowledge reading and understanding the Special YesProvision Term Contract Provisions.

5 Quantities I acknowledge that the quantities listed for each line item Yare an estimated amount. The City/County does notguarantee any dollar amount or order quantities for theterm of the contract.

6 Delivery State number of delivery days after receipt of order (ARO). 60 to 90 DaysFOB to the City/County at the location specified with alltransportation charges paid.

7 Contact Name of person submitting this bid: Brian Motschenbacher

8 Early Return Penalty Schedule Do you have an Early Return Penalty Schedule for the YesAttachments? If so, I acknowledge that I have attached ourEarly Return Penalty Schedule by item number in theVendors' Response Attachment Section of this e-bid.Please include penalty amount for each of the four (4)year lease periods, Year 1, Year 2, Year 3 and Year 4.

9 Base Machine Technical Specifications/Brochure Please attach to the Vendor's Response Attachment YesSection of the E-bid the brochure and or technicalspecifications of the base machine bidding.

10 U.S. Citizenship Attestation Is your company legally considered an Individual or Sole NoProprietor: YES or NO

As a Vendor who is legally considered an Individual or aSole Proprietor I hereby understand and agree to complywith the requirements of the United States CitizenshipAttestation Form, available at:http://www.sos.ne.gov/business/notary/citizenforminfo.html

All awarded Vendors who are legally considered anIndividual or a Sole Proprietor must complete the form andsubmit it with contract documents at time of execution.

If a Vendor indicates on such attestation form that he orshe is a qualified alien, the Vendor agrees to provide theUS Citizenship and Immigration Services documentationrequired to verify the Vendor’s lawful presence in theUnited States using the Systematic Alien Verification forEntitlements (SAVE) Program.

Vendor further understands and agrees that lawfulpresence in the United States is required and the Vendormay be disqualified or the Contract terminated if suchlawful presence cannot be verified as required by Neb.Rev. Stat. 4-108.


11 Tax Exempt Certification Forms Materials being purchased in this bid are tax exempt and Yesunit prices are reflected as such. A Purchasing AgentAppointment form and a Exempt Sales Certificate formshall be issued with contract documents. (Note: State TaxLaw does not provide for sales tax exemption forproprietary functions for government, thereby excludingthe purchases of pipes to be installed in water lines andpurchase of water meters.)

12 Electronic Signature Please check here for your electronic signature. Yes

13 Agreement to Addendum No. 1 Respondent hereby certifies that the change set forth in Yesthis addendum has been incorporated in their proposal andis part of their bid.Reason: See Bid Attachments section for Addenduminformation.




Line Items

# Qty UOM Description Response

1 1 EA 4-Wheel Skid Loader Rental for the City of Lincoln, Water Department $8,275

Manufacturer: Deere or Equivalent Manufacturer #: 332G

Item Notes:

Supplier Notes:

Item Attributes: Please review the following and respond where necessary# Name Note Response

1 Manufacturer and Model Please provide Manufacturer and Model bidding Bobcat S770

2 Additional Hours Please provide your hourly rate of hours that equipment 20.00 per hourisused beyond 250.

Package Line Items:# Qty UOM Description Response

1.1 1 EA 4-Wheel Tire Loader Rental 5,500.00

Item Notes: Maximum of 250 hours per year with option to purchase additional hours at a set fee.Vendor shall indicate hourly fee in the Attribute Section.Loader shall meet the emissions standards.Loader shall have a four (4) cylinder, liquid-cooled diesel, minimum of Net 96 HP and a maximum torque of 395 lbf-ftManufacturer and Model of Skid Loader requested is Deere 332G, Tier 4 or an equivalent.Minimum operating weight approximately of 10,000 lbs.Rated Operating Capacity of 3,600 lbs or greater.Sealed Cab with Heat and Air conditioning.Prefer Joy Stick Control.High-FlowPlease attach brochure with equipment specifications of Skid Loader bid in the Vendors Response Attachment Section of the E-bid.Price must include delivery to and pickup from, Ashland Water Treatment Plant.

SupplierNotes:

1.2 1 EA 84" Smooth Bucket with Cutting Edge 0.00

Item Notes: Industrial/Construction Bucket with minimum width of 84".

Supplier 80” Bucket with reversible edge will be supplied with machineNotes:

1.3 1 EA Option: 48" Pallet Forks 375.00

SupplierNotes:

1.4 1 EA Option: Electrical Control Wiring Harness 0.00

SupplierNotes:


1.5 1 EA Option: Manufacturer's recommended maximum counter weight 0.00

Item Notes: Please specify what that weight is in the Supplier Item Notes

Supplier 400lb. frame mounted counter weight kit. Lift capacity 3650lbs. Supplied at no charge.Notes:

1.6 1 EA Option: 60" Snow Blower Accessory 2,000.00

Item Notes: Minimum of four (4) month rental December - March or earlier and/or possibly later

Supplier Snow blower will be 72” wide to accommodate the width of machine. $500.00 per month and can start sooner than December andNotes: go later than March as needed.

1.7 1 EA Option: 96" Snow Bucket Accessory 400.00

Item Notes: Minimum of four (4) month rental December - March or earlier and/or possibly later

Supplier Light material bucket will be 88” with a reversible edge. $100.00 per month and can start earlier than December and can go laterNotes: than March as needed.

1.8 1 EA Option: Advanced Hydraulic Control System 0.00

Item Notes: For the model you are proposing in line item number 1 to allow operator to vary hydraulic control speed and skid loader speed whileusing pavement planner attachment

Supplier Advanced Hydraulic Control System no longer available. SJC controls (bid with machine) will allow operator to control hydraulicNotes: speed and skid-steer loader speed.

2 1 EA 4-Wheel Skid Loader Rental for City of Lincoln, Solid Waste Operations $4,000

Manufacturer: Deere or equivalent Manufacturer #: 316G

Item Notes:

Supplier Notes:


1 Manufacturer and Model Please provide Manufacturer and Model bidding. Bobcat S570

2 Hourly Rate Please provide your hourly rate of hours that equipment $20.00 per hourisused beyond 250.



2.1 1 EA 4-Wheel Skid Loader Rental 4,000.00

Item Notes: Maximum of 250 hours per year with option to purchase additional hours at a set fee.Approximately 100 hours of minimum use annually.Vendor shall indicate hourly fee in the Attribute Section.Loader shall meet the emissions standards.Loader shall have a four (4) cylinder, liquid-cooled diesel, minimum of Net 61 HP and a rated operating load approximately tomaximum of 1,750 lbs.Manufacturer and Model of Skid Loader requested is Deere 316G, Tier 4 or an equivalentSealed Cab with Heat and Air conditioning.Vertical or radial lift is acceptableHand/foot controls and joystick controls - operator selectable; if this dual, operator selectable control system is not available, preferthe joystick control over the hand/foot controlPlease attach brochure with equipment specifications of Skid Loader bid in the Vendors Response Attachment Section of the E-bid.Price must include delivery to and pickup from, Solid Waste Operations Facility on Bluff Road.Used primary to load, unload, carry white goods/appliances without crushing with hydraulically actuated clamp (provided by owner)in small work area.Secondary applications generally include material handling, sweeping and digging post holes. Small footprint is as important as theother features.

SupplierNotes:


Supplier 68” or 74” Low profile bucket included (customer choice) bucket will have reversible edgeNotes:

2.3 1 EA Option: Manufacturers recommended maximum counter weight 0.00

Item Notes: Manufacturer's recommended material handling bucket for machine size; no other attachments necessary.

Supplier Maximum counter weight kit installed no chargeNotes:

3 1 EA Track Loader Rental for City of Lincoln, Parks and Recreation Department $6,350

Manufacturer: Deere or equivalent Manufacturer #: 323E

Item Notes:

Supplier Notes:


1 Manufacturer and Model Please provide Manufacturer and Model bidding. Bobcat T650

2 Hourly Rate Please provide your hourly rate of hours that equipment $30.00isused beyond 250.



3.1 1 EA Track Loader Rental 5,500.00

Item Notes: Maximum of 250 hours per year with option to purchase additional hours at a set fee.Approximately 100 hours of minimum use annually.Vendor shall indicate hourly fee in the Attribute Section.Loader shall meet the emissions standards.Loader shall have a four (4) cylinder, liquid-cooled diesel, maximum of Net Power 70 HP and a rated operating load approximatelyto maximum of 2,590 lbs.Joystick operator operation methodManufacturer and Model of Skid Loader requested is Deere 323E, Tier 4 or an equivalentSealed Cab with Heat and Air conditioning.Vertical or radial lift is acceptablePlease attach brochure with equipment specifications of Skid Loader bid in the Vendors Response Attachment Section of the E-bid.Price must include delivery to and pickup from Parks, 1525 Memorial Drive.

SupplierNotes:


Supplier 74” low Profile bucket with reversible edge will be provided with machineNotes:


Supplier 74” low profile bucket with reversible edge or teethNotes:

3.4 1 EA Option: 96" Snow Bucket 400.00

Supplier 88” light material bucket with reversible edge / 4 month period December through March $100.00 per month Can start earlier andNotes: keep later if needed.

4 1 EA 4-Wheel Skid and Track Loader Rentals for City of Lincoln Transportation & Utilities, Fleet $50,850

Manufacturer: Deere or equivalent

Item Notes: Skid Steer Loaders will be broke out on the line items that follow. Total of six (6) are needed.

Supplier Notes:


1 Manufacturer and Model Please provide Manufacturer and Model bidding for all six Bobcat S570(6) skid steer loaders here.

2 Houlrly Rate Please provide your hourly rate of hours that equipment $20.00isused beyond 250.




Manufacturer: Deere or Equivalent Manufacturer #: 318E

Item Notes: Maximum of 250 hours per year with option to purchase additional hours at a set fee.Vendor shall indicate hourly fee in the Attribute Section.Loader shall meet the emissions standards.Loader shall have a four (4) cylinder, liquid-cooled diesel, minimum of net power 71 hp and maximum axle torque of 4,994 lb. - ft.Hydraulic pump flow from 21 gpm to high-flow option of 29 gpmManufacturer and Model of Skid Loader requested is Deere 318E, Tier 4 or an equivalent. Minimum operating weight approximatelyof 10,000 lbs. Rated Operating Capacity of 1,800 lbs or greater.Gross power maximum of 63.2hpSealed Cab with Heat and Air conditioning.Prefer Joy Stick Control.Please attach brochure with equipment specifications of Skid Loader bid in the Vendors Response Attachment Section of the E-bid.Price must include delivery to and pickup from Fleet Services, 901 W. Bond Street.

SupplierNotes:


Supplier 68” Low profile Bucket with reversible edge will be provided with machine. No chargeNotes:


Manufacturer: Deere or Equivalent Manufacturer #: 324E

Item Notes: Maximum of 250 hours per year with option to purchase additional hours at a set fee.Approximately 100 hours of minimum use annually.Vendor shall indicate hourly fee in the Attribute Section.Loader shall meet the emissions standards.Loader shall have a four (4) cylinder, liquid-cooled diesel, minimum of Net 71 HP and a rated operating load capacity of 2690 lbs.Manufacturer and Model of Skid Loader requested is Deere 324E, Tier 4 or an equivalentHigh Flow Hydraulic System - from 21 gpm to 29 gpmSealed Cab with Heat and Air conditioning.Vertical or radial lift is acceptableHigh-FlowPlease attach brochure with equipment specifications of Skid Loader bid in the Vendors Response Attachment Section of the E-bid.Price must include delivery to and pickup from Fleet Services, 901 W. Bond Street.

SupplierNotes:


Supplier 74” Low profile bucket with reversible edge provided with machine. No chargeNotes:


4.5 1 EA Track Loader Rental 6,000.00

Manufacturer: Deere or Equivalent Manufacturer #: 325G

Item Notes: Maximum of 250 hours per year with option to purchase additional hours at a set fee. Approximately 100 hours of minimum useannually. Vendor shall indicate hourly fee in the Attribute Section. Loader shall meet the emissions standards. Loader shall have afour (4) cylinder, liquid-cooled diesel, maximum of Net Power 70 HP and a rated operating load capacity of a minimum tipping loadof 2,590 lbs.Manufacturer and Model of Track Loader requested is Deere 325G, Tier 4 or an equivalentHigh Flow Hydraulic System - from 19 gpm to 27 gpmSealed Cab with Heat and Air conditioning.Vertical or radial lift is acceptableHigh-FlowPlease attach brochure with equipment specifications of Skid Loader bid in the Vendors Response Attachment Section of the E-bid.Price must include delivery to and pickup from Fleet Services, 901 W. Bond Street.

Supplier Bidding Bobcat T650Notes:


Supplier 74” or 80” Bucket available with reversible edge (customer choice) No chargeNotes:

4.7 5 EA Broom Attachments, 72" Pick-Up 1,500.00

Supplier When sweepers are turned in. 50% of bristle length must be left / 50% of reversible cutting edge thickness must be remaining.Notes:

4.8 1 EA 78" Tooth Bucket 450.00

SupplierNotes:

4.9 1 EA Grapple Bucket 1,300.00

Supplier 74” industrial grapple bucket or 82” root grapple. Customer choice.Notes:

4.10 2 EA Hydraulic Planners 5,800.00

Supplier Bobcat planer 18” HF with fast cut drum / 24” HF planer with fast cut drum option $7,250.00Notes:

4.11 1 EA Engine Driven Planer No Bid

SupplierNotes:

5 1 EA 4-Wheel Skid Loader Rental for Lancaster County, Corrections $5,375

Manufacturer: Deere or equivalent Manufacturer #: 324E

Item Notes:

Supplier Notes:



1 Manufacturer and Model Please provide Manufacturer and Model bidding. Bobcat S650

2 Hourly Rate Please provide your hourly rate of hours that equipment 20.00 Per Hourisused beyond 250.



Item Notes: Maximum of 250 hours per year with option to purchase additional hours at a set fee.Approximately 100 hours of minimum use annually.Vendor shall indicate hourly fee in the Attribute Section.Loader shall meet the emissions standards.Loader shall have a four (4) cylinder, liquid-cooled diesel, minimum of net 71 HP with gross net of 74 and a rated operating loadcapacity of 2690 lbs.Manufacturer and Model of Skid Loader requested is Deere 324E, Tier 4 or an equivalentHigh Flow Hydraulic System - from 21 gpm to 29 gpmSealed Cab with Heat and Air conditioning.Vertical or radial lift is acceptablePlease attach brochure with equipment specifications of Skid Loader bid in the Vendors Response Attachment Section of the E-bid.Price must include delivery to and pickup from Lancaster County Corrections.

Supplier Bidding Bobcat S650Notes:


Supplier 74” or 80” low profile bucket with reversible edge (customer choice) No chargeNotes:

5.3 1 EA Option: 42" Pallet Forks 375.00

Supplier 42” pallet forks with walk through frameNotes:

Response Total: $74,850.00

M2·Series Sldd·Steer Loaders

2

The skid-steer

loader can pivot 360

degrees, which makes

it one of the most

maneuverable pieces

of equipment available.

Why Slcid-Steer Loaders?

Since inventing the world's first true compact loader in 1958,

Bobcat has constantly improved on its original concept: a tough, agile

and versatile compact machine that can tackle an incredible number

of jobs. I Today, the innovation continues. The Bobcat® skid-steer

loader features a superior design that outperforms other brands

while maximizing your uptime and delivering unmatched comfort.

Quicker Turning When not carrying a load, a weight distribution of 70 percent in the rear and 30 percent in the front delivers balanced, easy turning for ideal performance: • Best weight distribution for turning and skidding.

• Reduces fuel consumption and power requirements from engine.

•Increases life of drive train and tires. • Less wear and tear than flat-footed machines sold by other manufacturers.

Stronger Hydt~ylics The Bobcat engine, pump, horsepower and cubic-inghdjpplacementare configHE~QJ~)i.ecisely for eachmodel's s pecifie"'ope"fiating>.capacity. ~pQin e QO.[Sepower ana'Q)Idraulic system

·· p~rtQ~mance are finely tuned to run circles~around other machines.

,'',, "<~;~,':,·· ,'"'

More Torque Bobcat loaders reach maximum torque

·at a lower rpm to minimize stalling and tim

Control in Your Hands With Bobcat skid-steer loaders, you can feel and control the loader's drive, engine torque and tractive effortso you can push your machine to the limit without an engine anti-stall system robbing you of power when you need it the most.

2-Speed Travel Option Boost top travel speed by as much as 57 percent and reduce the time it takes to travel across a jobsite.

HydrauJlc.;cJJUJ:.~ef:positioriing Optional fiyctraulic ij~·cket positioning keeps yourl;wcketlevel when raising lift arms, reduding spillage and allowing you to work more efficiently.

Automatic Ride Control Automatic ride control detects when you're carrying material and cushions the load to reduce spillage and increase oper~tor cqrnfort. The works at any speed.

p a swit.Gb to turn it as backdragging.

6

Pli e r tection When the skid-steer loader isn't working, no body's working. That's

why Bobcat reliability is legendary. Whether it's our maintenance

free chaincase, smart cooling, superior lift arms, machine shutdown

protection, self diagnostics or theft protection, our reputation for reliable

equipment protects your reputation for timely, productive work.

Battery Run-Down Protection The lighting circuit automatically shuts down to prevent accidental battery discharge.

,----...... , Machine Shutdown

No-Maintenance Axle Bearings Bobcat axle bearings are automatically lubricated with chain case oil- so they never need greasing.

Protection Bobcat loaders come

standard with automatic shutdown that monitors engine

and hydraulic functions. The system alerts the operator and

actually shuts the machine downlessening the chance of damage to the engine or hydraulic components.

Tougher Axles Axles larger than any comparablesized loader prevent downtime.

10

uperior Lilt r s Your loader arms should remain rigid when you move with a load,

and hydraulic hoses should be protected from the hazards of ajobsite.

Bobcat knows this better than anyone. Our durable, patented lift

arm design and a choice of lift path help you meet the unique demands

of your job.

Higher lift, more capacity and reach at maximum height

I'

Vertical Lift Path A vertical lift path provides higher lift capacity and more reach at full lift height than radius lift path, keeping the load closer to the machine while you raise the loader arms. Because you achieve maximum reach at full lift height, it's easier to clear high-sided truck boxes and hoppers. It's also better for placing heavy pallets of block or sod.

Job-Matched Lift Arms A vertical lift path and radius lift path each have their advantages. Bobcat builds both styles to match the work you do.

Hydraulically Cushioned Cylinders Smooth, quick Bobcat lift cylinders softly lower the lift arms back to their original position on the loader frame. This occurs automatically with every lift cycle to reduce noise and increase comfort during operation.

Radius Lilt Path A radius lift path provides maximum reach at truck bed height. Arm movement forms an arc. More than 80 percent of that arc delivers better reach at truck bed height. A radius lift path excels in jobs at mid-range heights, like dumping over a wall, backfilling or unloading flatbed trucks.

Single-Plane Design Every pin and connecting poi Bobcat lift arms are part of a plane design. Side-to-side is minimized, resulting in less and longer life. It also helps unwanted spillage of material.

More reach at mid-range

11

12

elux I stru entation The deluxe instrument panel offers you even more functionality. The 5-inch, full-color LCD screen enables

monitoring of and interaction with your machine. The system can even provide information about machine

performance in English, Spanish and five other languages.

Activity Monitor Check machine usage by operator with the job clock feature.

Functional lockouts Protect your investment from misuse or accidental use by locking out certain functions such as high-flow hydraulics and 2-Speed travel.

Password-Protected Keyless Start Eliminate downtime due to lost keys. Remove the risk of spare keys in the pockets of current or former employees. Reduce the chance of theft or unauthorized use. You might even reduce your insurance premiums.

Attachment Operation Deluxe instrumentation features a viewable job clock for certain attachments and the ability to make adjustments to laser-guided attachments without stepping out of the cab. You can even monitor certain attachment functions on-screen.

Diagnostics The easy-to-read, backlit display panel monitors 14 major loaderfunctions and provides troubleshooting suggestions to help solve a potential problem, which helps maximize your uptime.

Other Deluxe Instrumentation Features Digital time clock, user job clock, statistics for overall job and individual operators, resettable hour meter, attachment controls, help menu, and multiple password settings give you added convenience and more control over your machine.

M2-Series deluxe instrument panel is pictured here. See your dealer for details.

Vibration-Reducing Cab Isolation With front-mount rubber bushings that are 32 percent larger and rearmount bushings that are 160 percent larger than previous generation loaders, the operator experie is better than ever.

Seat-Mounted Joysticks On loaders with Selectable Joystick Controls (SJC), the joysticks are mounted to the seat. As your suspension seat moves up and down, the joysticks move with the seat for added comfort while operatin

Improved Seat Adjustme The adjustable seat additional inches of aft movement to different-sized

Large Entry On machines with enclosed cabs, large swing-open doors provide ample room for exit and entry.

More Room Our stronger, narrower loader arms make a wider cab possible, with up to 20 percent more interior space than competitors, keeping you comfortable.

Heat and Air Conditioning Because our AC units are integrated into the machine, there is no bulky add-on unit to obstruct your visibility. Automotive-style vents allow you to point your air where you need it for greater comfort in all weather conditions.

Ample Storage Storage bins are located throughout the interior. You can store items wherever it's convenient- on your right or on your left.

Convenient Engine Speed Control The engine speed control is within easy reach on the right-hand corner post of the cab.

Fingertip Controls Fingertip controls make your attachment comfortable to operate, easy to control and simple to adjust while driving. Dual-direction detent allows hydraulic flow to be engaged continuously, in either direction, without holding a switch. Variable hydraulic flow allows you to slowly move cylinders when working with a grapple or combination bucket, or crank it up to maximum flow to quickly shake dirt from an auger bit.

12-Volt Power Accessory Your cab is your office. That's why Bobcat installed a 12-volt power accessory for charging your mobile phone and other devices.

Easy-Pull, Easy-Secure Side Window Simply pull the window knob to slide the side window to five lockable positions. The window stays exactly where you want it to get consistent air flow.

Heated Cloth Air-Ride Seats Upholstered in comfortable, breathable cloth and equi with operator-controlle for warmth in cold weather, optional air-ride seat provid the ultimate in comfort. air suspension adjusts to weight, helping you <'IYll"•nth,

the bumps on your jo increasing your com

Side Lighting Kit Mounted above the right and left side windows, these low-profile, BOO-lumenrated LED lights make operation more productive at all hours.

Radio-Capable Order your loader with a stereo to enhance your operation experience. The radio features an auxiliary audio input jack that is ready for a mobile phone or other device.

Other Comfort Cab Features • High-output halogen lights for

low-light operation • Adjustable foot pedals

Availability of some comfort features varies by model and configuration. See your dealer for details.

isibilitv Leading all-around visibility is central to the design of the cab

on Bobcat loaders. This provides a big advantage when loading

a truck or using attachments.

Increased Top Visibility A top window with 34 percent more viewing area gives you an unbeatable view when raisin a load above the cab, such as loading trucks or stacking materials.

Cab-Forward Desig The cab-forward design moves the operating area closer to the attachment, giving you a better vantage point to see your work.

Rear Visibility The cab-forward design doesn't affect rear visibility. The large rear window and angle of the back of the loader provide a great view behind the tailgate.

All-around visibility is

central to the design of the

cab on Bobcat loaders.

Side Visibility In the Bobcat cab, you can see the wheels without having to lift your loader arms, increasing your performance in tight areas, such as grading next to a building or backing onto a trailer.

Choice Controls Bobcat offers all of the common control patterns found on compact

loaders today - and it's the only brand that allows you to choose

your preference at the flip of a switch. It's the largest selection of

control possibilities in the industry.

Bobcat Standard Controls With Bobcat standard controls, each steering lever controls each drive side independently,

while dual foot pedals control the loader lift and tilt. It's still the most popular control style.

Advanced Control System (ACS) ACS offers your choice of two control styles in one machine. By pressing a switch, you can use traditional Bobcat standard controls or "H" pattern hand controls, where the left lever controls the left drive and lift, while the right lever controls the right drive and tilt.

Remote Control With remote control operation, you control your loader without having to be in the cab. This is a smart solution for hot, dusty environments or on jobs where you'd rather be outside the machine. Completely portable, and designed for the worst working environments, the radio remote control system is installed or removed in minutes for easy use with multiple machines.

a nora ic Serviceability Bobcat loaders are designed to provide the fastest, easiest

maintenance in the industry. Engine checkpoints are within easy

reach -so daily maintenance actually gets done. Unparalleled

access to routine and long-term maintenance points makes

preventative maintenance simple, reducing your operating

costs and adding to your bottom line.

Full-Access Serviceability Our large, swing-open tailgate provides convenient access to routine maintenance points. There are no radiators to move, lift arms to raise or lift-arm support devices to install.

Protective Tailgate The one-piece, 1J,i-inch steel tailgate door protects loader components from jobsite hazards.

Tip-Up Cab For non-routine service, simply remove two nuts and tip back the cab to access hydraulic and hydrostatic components in minutes.

I.

Tier 4 Solutions When Tier 4 emissions standards required every

equipment manufacturer to make equipment changes,

Bobcat designed a non-DPF Tier 4 solution that also delivers new

features and provides more performance to customers.

More Torque Higher combustion pressures generate more torque. Bobcat engines have a robust combustion chamber that handles more pressure and produces more torque than ever before, meaning better performance for pushing, digging, lifting and operating attachments.

Go to Bobcat.com/Tier4Engine to learn more about the Bobcat engine features and performance improvements.

A Wider Range of Power Bobcat engines generate the most torque across a much wider rpm range. Our engines can stay in the peak torque range longer, maximizing your performance. Operators of every skill level can better utilize full engine performance to get more work done.

Other Bobcat Engine Advantages: Improved Machine Shutdown Protection Monitors coolant and oil temperatures and prevents them from reaching a critical point of shutdown.

Cold Weather Engine Protection Protects your machine from working too hard before the engine is properly warmed up.

Lower Operating Costs and Reduced Noise An auto-idle function on SJC-equipped machines reduces noise levels.

Simple, State-of-the-Art and Non-DPF The biggest advantage of our Tier 4 solution is simplicity. Bobcat engines meet Tier 4 regulations without a diesel particulate filter (DPF). This reduces downtime that occurs with DPF regeneration and long-term DPF maintenance costs. That allows operators to focus on working.

21

Bobcat loaders have your business expansion built right in. An auger,

breaker or one of more than 70 attachments will go a long way to save

you time and labor. Whether it's breaking concrete, taking down buildings

or drilling tree holes, Bobcat attachments help you take on new jobs

and get more use from your machine. They're vertically integrated with

your Bobcat loader's electronics, hydraulics and geometry, and they're

designed with visibility and ease of entry and exit in mind.

Quicl' Couplers Trapped line pressure can make attachment changes anything but quick. So Bobcat loaders come with quick couplers to release trapped pressure. By pushing the coupler inward, hydraulic oil is released through a return line back into the machine. The result is a clean, quick attachment change every time.

Attachment Control Kit Several attachments require control of more than one function. Our small, seven-pin attachment harness activates power and fingertip-control functions while eliminating the need for mechanical relays used on other loaders. It's fully integrated with your Bobcat loader for a clean look and protected routing.

Bob .. Jach System Change attachments in less than a minute with the Bob-Tach® mounting system. Replace a bucket with a pallet fork, landscape rake, auger, grapple and more, while keeping a tight attachment fit every time.

Power Bob-Tach System With the Power Bob-Tach® system, you can change non-hydraulic attachments without leaving the comfort of your cab. Just line up the attachment and press the switch.

Deluxe Instrumentation Hour Clock With the deluxe instrument panel, you can monitor the number of hours on each attachment.

Laser Positioning For laser-controlled attachments, deluxe instrumentation provides real-time, in-cab attachment position monitoring and adjustment.

Tree Spade Control With deluxe instrumentation, you can monitor active blades and gates, change auto-dig and easy-dig settings, and monitor the number of trees dug in a day.

Sonic Tracer/Slope Sensor The sonic tracer/slope sensor kit enables operators to create an accurate cross-slope or precisely grade when laser receivers and transmitters are limited by jobsite obstacles or the grade needed does not follow a plane.

High-Flow Hydraulics Optional high-flow hydraulics provide a big power boost for better production with attachments. Certain attachments, such as the flail cutter, trencher, planer and stump grinder, get maximum performance from high-flow hydraulics.

Multi-Carrier Versatility Get more versatility and profitability for your dollar. Several Bobcat attachments can be used across carriers. For example, a Modei15C auger can be shared with an all-wheel steer loader, skid-steer loader, compact track loader, compact excavator, Toolcaf" utility work machine and VersaHANDLER® telescopic tool carrier.

Superior Attachment Availability Bobcat dealers specialize in compact equipment- so they are much more likely to stock or rent attachments that other equipment retailers don't even have. You'll be able to buy or rent the attachments you need.

Attachment Support The attachment is as important as your machine. If you buy an attachment off the internet or at a discount store, who is going to service it, provide parts and complete your warranty? Bobcat Company supports its attachments better than anyone. We are your onestop shop for your attachment parts, service, finance and warranty.

All-Wheel Steer Innovation Bobcat is famous for giving you

more ways to get the job done.

When you want maneuverability

or turf-friendly performance on

demand, only Bobcat delivers.

Two steering modes by simply pressing a switch

The powerful A770 is the only compact loader in the industry that

offers all-wheel steer and skidsteer capabilities. This revolutionary loader operates with smooth, all-wheel steering that rolls through a turn without tearing up finished turf or leaving marks on driveways. When you need the unmatched maneuverability of a skidsteer loader, just press a switch and your loader can turn within its own length.

Bobcat gives vou more. More models. More features. More options. More versatility. With skid-steer and all-wheel steer loader models ranging from 36 to 80 inches wide and 23.5 to 100 horsepower, no one gives you more choices- or more machine for your money- than Bobcat. Get your choice of vertical lift path or radius lift path arm configurations. Take advantage of exclusive designs and groundbreaking technology. With Bobcat, you'll always get more, which means you'll have an easier time finding the machine that's matched to your job.

25

2200 lb. (998 kg) 2180 lb.(989 kg) 2690 lb.(1220 kg) 3100 lb.(1406 kg) 3350 lb.(1520 kg) 3950 lb.(1792 kg) 33251b.(1508 kg)

/eight kits are available to increase ROC. See dealer on available kits and ROC Increases for your loader. -------------------------4400 lb.(1995 kg) 4360 lb.(1978 kg) 5380 lb. (2440 kg) 6200 lb.(2812 kg)

1191n. (3023 mm)

Vertical

6793 lb. (3082 kg)

681n. (1727 mm)

77.81n. (1972 mm)

7.4 mph (11.8 km/hr.)

11.0 mph (17.3 km/hr.)

Tler4

74 hp

Turbo Diesel

24.7 gal. (93.7 L)

1211n. (3073 mm)

Radius

7610 lb.(3452 kg)

741n. (1880 mm)

81.31n.(2065 mm)

7.1 mph (11.4 km/hr.)

12.3 mph (19.8 km/hr.)

Tler4

74hp

Turbo Diesel

23.9 gal. (90.5 L)

1241n. (3149 mm)

Vertical

80611b.(3657 kg)

741n. (1880 mm)

81.31n. (2065 mm)

7.1 mph (11.4 km/hr.)

12.3 mph (19.8 km/hr.)

Tler4

74 hp

Turbo Diesel

23.9 gal. (90.5 L)

1321n.(3353 mm)

Vertical

8794 lb. (3989 kg)

741n. (1880 mm)

81.31n. (2065 mm)

7.1 mph (11.4 km/hr.)

12.3 mph (19.8 km/hr.)

Tler4

74 hp

Turbo Diesel

23.9 gal. (90.5 L)

6700 lb. (3039 kg)

132ln. (3353 mm)

Vertical

93141b. (4225 kg)

741n. (1880 mm)

81.31n. (2065 mm)

7.1 mph (11.4 km/hr.)

12.3 mph (19.8 km/hr.)

Tler4

92 hp

Turbo Diesel

23.9 gal. (90.5 L)

-Included with SJC Option---------------------------No

No

Never

Std

Std

Std

Std

Never

Opt

Std

Std

Std

Opt

Opt

Opt

Std

Opt

Std

Std

Opt

Opt

Opt

Sid

Opt

Std

Opt

Opt

Opt

Std

Opt

Opt

Opt

Std

Opt

Std

3500 psi

17.1 gpm (64.7 L/mln.)

26.7 gpm (101.1 Llmln.)

Std

No

No

Never

Std

Std

Std

Sid

Never

Std

Std

Std

Std

Opt

Opt

Opt

Opt

Opt

Std

Std

Opt

Opt

Opt

Std

Opt

Std

Opt

Opt

Opt

Std

Opt

Opt

Opt

Std

Opt

Std

3500 psi

23.0 gpm (87.1 L/mln.)

30.5 gpm (115.5 L/mln.)

Std

No

No

Never

Std

Std

Std

Std

Never

Std

Opt

Std

Opt

Opt

Opt

Opt

Opt

Std

Std

Opt

Opt

Opt

Std

Opt

Std

Opt

Opt

Opt

Std

Opt

Opt

Opt

Std

Opt

Std

3500 psi

23.0 gpm (87.1 Llmln.)

30,5 gpm (115.5 L/mln.)

Std

No

No

Never

Std

Std

Std

Std

Never

Std

Opt

Std

Opt

Opt

Opt

Opt

Opt

Std

Std

Opt

Opt

Opt

Std

Opt

Std

Opt

Opt

Opt

Std

Opt

Opt

Opt

Std

Opt

Std

3500 psi

23.0 gpm (87.1 L/mln.)

30.5 gpm (115.5 Llmln.)

Std

No

4.6 gal. (17.4 L)

Never

Std

Std

Std

Std

Never

Std

Opt

Std

Opt

Opt

Opt

Opt

Opt

Std

Std

Opt

Opt

Opt

Std

Opt

Std

Opt

Opt

Opt

Std

Opt

Opt

Opt

Std

Opt

Std

3500 psi

23.0 gpm (87.1 Llmln.)

36.6 gpm (138.5 Llmln.)

Std

h SJC Option (see attachment section for details) -----------------------

7900 lb.(3583 kg)

1441n. (3657 mm)

Vertical

10,2371b. (4643 kg)

80 ln. (2032 mm)

83.41n. (2118 mm)

7.1 mph (11.4 km/hr.)

12.3 mph (19.8 km/hr.)

Tler4

100 hp

Turbo Diesel

29.5 gal. (111.6 L)

Std

No

4.6 gal. (17.4 L)

Never

Std

Std

Std

Std

Never

Std

Opt

Opt

Opt

Std

Std

Opt

Std

Std

Opt

Opt

Opt

Std

Opt

Std

Opt

Opt

Opt

Std

Opt

Opt

Opt

Std

Opt

Std

3500 psi

23.0 gpm (87.1 L/mln.)

36.6 gpm (138.5 Lim ln.)

Std

Std

6650 lb.(3016 kg)

1321n. (3353 mm)

Vertical

96231b. (4365 kg)

741n. (1880 mm)

81.31n. (2065 mm)

7.1 mph (11.4 km/hr.)

12.3 mph (19.8 km/hr.)

Tler4

92 hp

Turbo Diesel

23.9 gal. (90.5 L)

Std

No

3.5 gal. (13.2 L)

Never

Std

Std

Std

Std

Never

Std

Opt

Opt

Std

Std

Opt

Std

Std

Opt

Opt

Opt

Std

Opt

Std

Opt

Opt

Opt

Std

Opt

Opt

Opt

Std

Opt

Std

3500 psi

23.0 gpm (87.1 L/mln.)

36.6 gpm (138.5 L/mln.)

Std

Std

*Certain specification(s) are based on engineering calculations and are not actual measurements. Specificatlon(s) are provided lor comparison purposes only and are subject to change without notice. Specification{sl for your individual Bobcat equipment will vary based on normal varla!ions in design, manufacturing, operating conditions, and other factors. 29

Specifications A

71.4 ln. (1814 mm) 77.81n. (1976 mm) 77.8ln. (1972 mm) 77.81n. (1972 mm) 77.81n. (1972 mm) 77.81n. (1972 mm)

25' 23' 24' 24' 24' 24'

5.51n. (141 mm) 8.41n. (213 mm) 7.31n. (185 mm) 7.31n. (185 mm) 7.31n. (185 mm) 7.31n. (185 mm)

28.4 ln. (722 mm) 35.41n. (899 mm) 42.61n. (1082 mm) 42.61n. (1082 mm) 42.6ln. (1082 mm) 42.61n. (1082 mm)


97.3 ln. (2472 mm) 124.91n. (3173 mm) 1331n. (3378 mm) 1331n. (3378 mm) 133ln. (3378 mm) 1331n. (3378 mm)

25' 28' 30' 30' 30' 30'

76.1 ln. (1934 mm) 84.9 in. (2166 mm) 86.81n. (2205 mm) 91.31n. (2319 mm) 91.31n. (2319 mm) 91.31n. (2319 mm)

15.8 ln. (400 mm) 20.8ln. (528 mm) 171n. (432 mm) 32.6ln. (828 mm) 32.6ln. (828 mm) 32.61n. (828 mm)

94.5 ln. (2399 mm) 109.51n. {2781 mm) 114.51n. (2908 mm) 1191n. (3023 mm) 1191n. (3023 mm) 1191n. (3023 mm)

34' 40' 42' 42' 42' 42'

97' 91' 97' 97' 97' 97'

361n. (914 mm) 62ln. (1575 mm) 68ln. (1727 mm) 681n. (1727 mm) 681n. (1727 mm) 68 in. (1727 mm)

58.7 ln. (1491 mm) 76.41n. (1941 mm) 80 ln. (2032 mm) 79.71n. (2024 mm) 79.7ln. (2024 mm) 79.71n. (2024 mm)

29.6 ln. (752 mm) 48.11n. (1222 mm) 54.11n. (1374 mm) 54.11n. (1374 mm) 55.5 in. (1410 mm) 55.51n. (1410 mm)


25' 25' 25' 25' 27' 25'


45.31n. (1150 mm) 45.3 ln. (1150 mm) 48.3ln. (1227 mm) 48.3 ln. (1227 mm) 52.91n. (1342 mm) 48.3ln. (1227 mm)

108.4 in. (2754 mm) 108.4ln. (2754 mm) 114.31n. (2903 mm) 114.31n. (2903 mm) 119.31n. (3030 mm) 114.3 in. (2903 mm)

136.8ln. (3474 mm) 136.81n. (3474 mm) 141.61n. (3597 mm) 141.61n. (3597 mm) 147.71n. (3751 mm) 141.61n. (3597 mm)

31' 31' 32' 32' 31' 32'

93.21n. (2367 mm) 96.3 ln. (2447 mm) 104.3ln. (2649 mm) 104.31n. (2649 mm) 116.2 in. (2951 mm) 104.31n. (2649 mm)

21.4 ln. (544 mm) 31.51n. (800 mm) 31.51n. (800 mm) 31.51n. (800 mm) 29.71n. (754 mm) 31.51n. (800 mm)

121 ln. (3073 mm) 124 in. (3149 mm) 1321n. (3353 mm) 1321n. (3353 mm) 1441n. (3657 mm) 132ln. (3353 mm)

42' 42' 42' 42' 42' 42'

97' 97' 98' 98' 98' 98'

741n. (1880 mm) 74 ln. (1880 mm) 741n. (1880 mm) 741n. (1880 mm) 80 ln. (2032 mm) 741n. (1880 mm)

83.41n. (2119 mm) 82.91n. (2106 mm) 85.81n. (2179 mm) 85.8ln. (2179 mm) 89ln. (2262 mm) 85.81n. (2179 mm)

59.3 in. (1507 mm) 59.3ln. (1507 mm) 59.31n. (1507 mm) 59.3ln. (1507 mm) 65.11n. (1652 mm) 61.91n. (1507 mm)

72.11n. (1832 mm) 72.11n. (1832 mm) 72.11n. (1832 mm) 72.11n. (1832 mm) 791n. (2005 mm) 74.71n. (1832 mm)

30

PIONEERING MANEUVERABILITY Bobcat introduced its first compact loader in 1958, and two years later, the world's first skid-steer loader. This created an entire industry of machines that put the power of large equipment in a compact size with unmatched maneuverability.

OFFERING MORE VERSATILITY In 1970, Bobcat invented the first quick-change attachment system for skid-steer loaders, known as the Bob-Tach mounting system. Today we offer more attachments than anyone in the world, empowering customers to transform all of our machines into multitasking attachment carriers and reach higher levels of production.

ONE TOUGH ANIMAL® All over the world, Bobcat equipment is known for being durable and dependable. By lasting longer and minimizing downtime, we help our customers become as successful as possible.

HELP WHEN YOU NEED IT With over 50 years of experience and more than 550 locations, we offer the best dealer network in the country for compact equipment. Our dealers offer a quality sales force, dependable parts departments and qualified service technicians, all leading to a quality customer experience.

A CONSTANT INNOVATOR In the late 1950s, a turkey farmer needed help- so in 1958, we introduced what was to become the world's first skid-steer loader. We created an industry by listening to the needs of the customer. This focus is the same today. In 2000, a superintendent needed help- so we built the world's first Toolcat utility work machine. We continue to be a global leader in innovation by listening to our customers.

Compact Skid-Steer Wheel Loader Loader

1958 1960

Bobcat. com

Bob-Tach Mounting System

1970

Compact Excavators

1986

CompactTrack Loaders

1999 2001 2003

LEADER BY DESIGN Listening to the customer and a pioneering spirit are why Bobcat continues to lead the evolution of compact equipment ... 1960 - Invented the FIRST true skid-steer loader. 1970 - Invented the FIRST attachment mounting system for

skid-steer loaders. 1977 - Built the FIRST skid-steer loader with no chain

adjustments required. Still a Bobcat exclusive. 1981 - Introduced the FIRST secondary restraint seat bar. 1983- The FIRST skid-steer loader with a transversely mounted

engine. Still a Bobcat exclusive. 1990 - Introduced the FIRST compact excavator manufactured

in the U.S. 1999- Introduced the FIRST compact track loader with a

solid-mounted undercarriage manufactured in the U.S. 2001 - Invented the FIRST loader with all-wheel steer and

skid-steer capabilities. Still a Bobcat exclusive. 2003 - Revolutionized the way the world works with the invention

of the Toolcat line, the world's FIRST utility work machines- a cross between a pickup, attachment carrier and utility vehicle. Still a Bobcat exclusive.

2006 - Introduced the FIRST utility vehicle with Rapid link'" attachment mounting system.

2008 - Roller Suspension, the FIRST all-steel suspension system, was introduced.

2009 - Launched M-Series compact excavators and loaders. 2011 - The M-Series loader models S850 and T870 became the

largest and most powerful in our lineup. 2012- Bobcat introduced two new sizes of extendable-arm

excavator options that are both attachment and clamp-ready.

2013 - The M-Series 500 frame-size loaders replaced the popular S185 and T190 (among many others). This loader size is the most popular in the world and has been for two decades.

2014 - Bobcat launched the 400 frame-size loaders, completing the M-Series line; manufactured its one-millionth loader; introduced its own Tier 4, non-DPF engines; and opened the Bobcat Acceleration Center, a dedicated innovation, testing and technology facility.

2016 - Launch of the M2-Series loaders. Today - There are more Bobcat skid-steer loaders at work around the

world than all other brands combined. Today - Bobcat manufactures more attachments than anyone

in the world. Today - Bobcat is the only company that offers operator training kits

for compact equipment. Today - Bobcat offers a full range of extendable-arm options, three

sizes fitting five different excavator models. Today - Compact track loaders are rapidly becoming the product of

choice in many market segments. Today - Launch of the R-Series excavators.

50 f&i. . .,_ ..6 ~"'~ Years M-Serles Compact ne-M1111onth M2-serles R-Serles

Excavators & Loaders Loader Loaders Excavators

2006 2008 2009 2014 2016 2017

31

..... \.., Prlntadon10'0 reo}ckd paper

B-1958 (01/19)

NOTE- Where applicable, dimensions are in accordance with ISO standards. Specifications and design are subject to change without notice. Pictures of Bobcat units may show other than standard equipment. All dimensions are given for loader equipped with standard tires. All dimensions are shown in inches. Respective metric dimensions are enclosed by parentheses. Bobcat Company complies with the requirements of ISO 9001 as registered with BSL

Bobcal is a Doosan company. Doosan is a global leader in construction equipment, power and water solutions, engines, and engineering, proudly serving customers and communities for more than a century. Bobcat0

, the Bobcat logo and the colors of the Bobcat machine are registered trademarks of Bobcat Company in the United States and various other countries. ©2019 Bobcat Company. All rights reserved.

Bobcat Company ~Bobcat

250 East Beaton Drive • West Fargo, NO 58078 Bobcat.com Printed In U.S.A.

One Tough Animal

Kn-7K-0119-63990-2-F

M2-Series Compact Trac11 Loaders

Great performance doesn't only come from a high horsepower engine.

Bobcat loaders use the machine's design and balance to deliver

more usable horsepower. We build machines with the right balance

between engine and pump, plus a weight distribution that delivers

powerful breakout forces and faster cycle times. If you need to work

quicker, lift more and outperform the competition, Bobcat compact

track loaders are the only choice.

Automatic Ride Control Automatic ride control detects when you're carrying material and cushions the load to reduce spillage and increase operator comfort. The system works at any speed. Operators can flip a switch to turn it off for tasks such as backdragging.

Stronger Hydraulics The Bobcat engine, pump, horsepower and cubic-inch displacement are configured precisely for each model's specific operating capacity. Engine horsepower and hydraulic system performance are finely tuned to run circles around other machines.

Control in Your Hands With Bobcat compact track loaders, you can feel and control the loader's drive, engine torque and tractive effortso you can push your machine to the limit without an engine anti-stall system robbing you of power when you need it the most.

Hydraulic Bucket Positioning Optional hydraulic bucket positioning keeps your bucket level when raising lift arms, reducing spillage and allowing you to work more efficiently.

Powerful Breakout Forces High-efficiency hydraulic pumps deliver more power matched to demand and provide better breakout forces.

More Torque Bobcat loaders reach maximum torque at a lower rpm to minimize stalling while saving time and fuel.

Built Tougher Forged-Steel Rollers and Idlers Steel idlers guide and support the track around the ends of the undercarriage. The dual-flange front idlers are wider, providing more contact with the tracks and enabling a smoother ride. They even absorb shock loads to provide better operator comfort. The idlers are also part of a simple system for maintaining track tension. The forged steel is more durable than rubber and will not wear as easily or chunk out.

Elevated Sprocket Design Elevated sprockets shed mud and debris as you work and reduce wear.

Exclusive Bobcat Tracks Bobcat tracks provide the best combination of flotation and traction. Many available options allow you to select the track pattern that you need for the type of work you do.

Embedded Steel Tough steel braces guide and support the track when engaging the drive sprocket. Steel-reinforced rubber tracks, designed exclusively for Bobcat, include internal steel cables for added strength.

Simple Maintenance When it's time to adjust track tension, all it takes is a common grease gun. Idlers and rollers are permanently sealed and lubricated.

7

Other 5-Linl' Torsion

Suspension Undercarriage

Benefits

',;:<;-'

• Longer tracks improve ride quality and increase flotation for better performance in soft conditions.

• High-grade steel bushings are durable and protected from damage.

• Five easy-to-access grease zerks ensure quick, simple greasing.

• Sloped design sheds material. • More cleanout access helps remove mud and debris. • Automatic hydraulic track tensioning ensures

performance and protects against detracking. • The 5-Link design is naturally quieter for reduced

sound levels in the cab.

The Bobcat T870: 5-Link Torsion Suspension Undercarriage, and More ROC The T870's big rated operating capacity is even bigger, with a 3.5 percent increase from 3,525 pounds to 3,650 pounds. Now, the highest-lifting loader on the market can handle heavier loads, tackle bigger jobs and increase productivity with every lift cycle.

• . .

' "

Quieter Operation The hydraulically powered SmartFAN senses engine temperature and only turns as fast as needed, reducing sound levels and providing excellent protection from overheating.

Protected Cooling Location The Bobcat radiator and hydraulic oil cooler are well protected between the frame uprights, above the engine. This also leaves the rear of the engine freely accessible for maintenance checks.

More Efficient Cooling Designed to provide excellent cooling for M2-Series loaders, the patented dual path cooling system draws cool, clean air from above, pulls warm air out of the engine compartment and forces it out two side vents, directing hot air away from the operator.

Optional Reversible Fan Reduce maintenance and downtime while increasing productivity in dirty, dusty conditions. The reversible fan increases uptime by purging debris from the rear screen. Auto mode reverses airflow automatically, and operator-controlled purge mode gives you the ability to reverse the fan at anytime.

uperior Lilt r s Your loader arms should remain rigid when you move with a load,

and hydraulic hoses should be protected from the hazards of a jobsite.

Bobcat knows this better than anyone. Our durable, patented lift-arm

design and a choice of lift path help you meet the unique demands

of your job.

,j''F'';,~;';H~fF11her lift more capacity and I , ~. ' j ·· r,~ach at maximum height

Vertical Lift Path A vertical lift path provides higher lift capacity and more reach at full lift height than radius lift path, keeping the load closer to the machine while you raise the loader arms. Because you achieve maximum reach at full lift height, it's easier to clear high-sided truck boxes and hoppers. It's also better for placing heavy pallets of block or sod.

I

12

Job-Matched Lift Arms A vertical lift path and radius lift path each have their advantages. Bobcat builds both styles to match the work you do.

Hydraulically Cushioned Cylinders Smooth, quick Bobcat lift cylinders softly lower the lift arms back to their original position on the loader frame. This occurs automatically with every lift cycle to reduce noise and increase comfort during operation.

Radius Lilt Path A radius lift path provides maximum reach at truck bed height. Arm movement forms an arc. More than 80 percent of that arc delivers better reach at truck bed height. A radius lift path excels in jobs at mid-range heights, like dumping over a wall, backfilling or unloading flatbed trucks.

Single-Plane Design Every pin and connecting point on Bobcat lift arms are part of a singleplane design. Side-to-side movement is minimized, resulting in less wear and longer life. It also helps prevent unwanted spillage of material.

reach at mid-range

13

14

eluxe lnstru entati n The deluxe instrument panel offers you even more functionality. The 5-inch, full-color LCD screen enables

monitoring of and interaction with your machine. The system can even provide information about machine

performance in English, Spanish and five other languages.

Activity Monitor Check machine usage by operator with the job clock feature.

Functional Lockouts Protect your investment from misuse or accidental use by locking out certain functions such as high-flow hydraulics and 2-Speed travel.

Password-Protected Keyless Start Eliminate downtime due to lost keys. Remove the risk of spare keys in the pockets of current or former employees. Reduce the chance of theft or unauthorized use. You might even reduce your insurance premiums.

Attachment Operation Deluxe instrumentation features a viewable job clock for certain attachments and the ability to make adjustments to laser-guided attachments without stepping out of the cab. You can even monitor certain attachment functions on-screen.

Diagnostics The easy-to-read, backlit display panel monitors 14 major loader functions and provides troubleshooting suggestions to help solve a potential problem, which helps maximize your uptime.

Other Deluxe Instrument Features Digital time clock, user job clock, statistics for overall job and individual operators, resettable hour meter, attachment controls, help menu, and multiple password settings give you added convenience and more control over your machine.

M2-Series deluxe instrument panel is pictured here. See your dealer for details.

Vibration-Reducing Cab Isolation With front-mount rubber bushings that are 32 percent larger and rearmount bushings that are 160 percent larger than previous generation loaders, the operator experience is better than ever.

Seat-Mounted Joysticks On loaders with Selectable Joystick Control (SJC), the joysticks are mounted to the seat. As your suspension seat moves up and down, the joysticks move with the seat for added comfort while operating.

Improved Seat Adjust The adjustable seat fe additional inches of · aft movement to different-sized

Large Entry On machines with enclosed cabs, large swing-open doors provide ample room for exit and entry.

More Room Our stronger, narrower loader arms make a wider cab possible, with up to 20 percent more interior space than competitors, keeping you comfortable.

Heat and Air Conditioning Because our AC units are integrated into the machine, there is no bulky add-on unit to obstruct your visibility. Automotive-style vents allow you to point your air where you need it for greater comfort in all weather conditions.

Ample Storage Storage bins are located throughout the interior. You can store items wherever it's convenient- on your right or on your left.

Convenient Engine Speed Control The engine speed control is within easy reach on the right-hand corner post of the cab.

Fingertip Controls Fingertip controls make your attachment comfortable to operate, easy to control and simple to adjust while driving. Dual-direction detent allows hydraulic flow to be engaged continuously, in either direction, without holding a switch. Variable hydraulic flow allows you to slowly move cylinders when working with a grapple or combination bucket, or crank it up to maximum flow to quickly shake dirt from an auger bit.

12-Volt Power Accessory Your cab is your office. That's why Bobcat installed a 12-volt power accessory for charging your mobile phone and other devices.

Easy-Pull, Easy-Secure Side Window Simply pull the window knob to slide the side window to five lockable positions. The window stays exactly where you want it to get consistent air flow.

Heated Cloth Air-Ride Se Upholstered in comforta breathable cloth and equi with operator-controlled for warmth in cold "''"'•hnY optional air-ride seat the ultimate in comfort. air suspension adjusts to weight, helping you sm the bumps on your increasing your comfort.

Side Lighting Kit Mounted above the right and left side windows, these low-profile, BOO-lumenrated LED lights make operation more productive at all hours.

Radio-Capable Order your loader with a stereo to enhance your operation experience. The radio features an auxiliary audio input jack that is ready for a mobile phone or other device.

Other Comfort Cab Features • High-output halogen lights

for low-light operation • Adjustable foot pedals

Availability of some comfort features varies by model and configuration. See your dealer for details.

isibilitv Leading all-around visibility is central to the design of the cab

on Bobcat loaders. This provides a big advantage when loading

a truck or using attachments.

Increased Top Visibil A top window with 34 percent more viewi area gives you an unbeatable view when a load above the cab, such as loading trucks o stacking materials.

Cab-Forward De The cab-forward design moves the operating area closer to the attachment, giving you a better vantage point to see your work.

Rear Visibility The cab-forward design doesn't affect rear visibility. The large rear window and angle of the back of the loader provide a great view behind the tailgate.

All-around visibility is

central to the design of the

cab on Bobcat loaders.

Side Visibility In the Bobcat cab, you can see the tracks without having to lift your loader arms, increasing your performance in tight areas, such as grading next to a building or backing onto a trailer.

20

Choice Controls Bobcat offers all of the common control patterns found on compact

loaders today - and it's the only brand that allows you to choose

your preference at the flip of a switch. It's the largest selection of

control possibilities in the industry.

Bobcat Standard Controls With Bobcat standard controls, each steering lever controls each drive side independently,

while dual foot pedals control the loader lift and tilt. It's still the most popular control style.

Advanced Control System (ACS) ACS offers your choice of two control styles in one machine. By pressing a switch, you can use traditional Bobcat standard controls or "H" pattern hand controls, where the left lever controls the left drive and lift, while the right lever controls the right drive and tilt.

Selectable Joystick Control offers low-effort hand control of all machine work group functions. "ISO" or "H" patterns can be easily activated by a dash-mounted rocker switch inside the cab.

Remote Control With remote control operation, you control your loader without having to be in the cab. This is a smart solution for hot, dusty environments or on jobs where you'd rather be outside the machine. Completely portable, and designed for the worst working environments, the radio remote control system is installed or removed in minutes for easy use with multiple machines.

Bobcat loaders have your business expans built right in. An auger,

breaker or one. of more than 70 attachments will go a long way to save you

time and labor. Whether it's breaking concrete, taking down buildings or

drilling tree holes, Bobcat attachments help you take on new jobs and

get more use from your machine. They're vertically integrated with

your Bobcat loader's electronics, hydraulics and geometry, and they're

designed with visibility and ease of entry and exit in mind.

Quicl' Couplers Trapped line pressure can make attachment changes anything but quick. So Bobcat loaders come with quick couplers to release trapped pressure. By pushing the coupler inward, hydraulic oil is released through a return line back into the machine. The result is a clean, quick attachment change every time.

Attachment Control Kit Several attachments require control of more than one function. Our small, seven-pin attachment harness activates power and fingertip control functions while eliminating the need for mechanical relays used on other loaders. It's fully integrated with your Bobcat loader for a clean look and protected routing.

Bob-Tach System Change attachments in less than a minute with the Bob-Tach® mounting system. Replace a bucket with a pallet fork, landscape rake, auger, grapple and more, while keeping a tight attachment fit every time.

• ','

Power Bob-Tach System With the Power Bob-Tach system, you can change non-hydraulic attachments without leaving the comfort of your cab. Just line up the attachment and press the switch.

Deluxe Instrumentation Hour Glock With the deluxe instrument panel, you can monitor the number of hours on each attachment.

Laser Positioning For laser-controlled attachments, deluxe instrumentation provides real-time, in-cab attachment position monitoring and adjustment.

Tree Spade Control With deluxe instrumentation, you can monitor active blades and gates, change auto-dig and easy-dig settings, and monitor the number of trees dug in a day.

Sonic Tracer/Slope Sensor The sonic tracer/slope sensor kit enables operators to create an accurate cross-slope or precisely grade when laser receivers and transmitters are limited by jobsite obstacles or the grade needed does not follow a plane.

with such as the flail cutter, trencher, planer and stump grinder, get maximum performance from high-flow hydraulics.

Superior Attachment Availability Bobcat dealers specialize in compact equipment- so they are much more likely to stock or rent attachments that other equipment retailers don't even have. You'll be able to buy or rent the attachments you need.

ulti-Carrier Versatility et more versatility and profitability for

your dollar. Several Bobcat attachments can be used across carriers. For example, a Modei15C auger can be shared with an all-wheel steer loader, skid-steer loader, compact track loader, compact excavator, Toolcat"" utility work machine and VersaHANDLER® telescopic tool carrier.

Attachment Support The attachment is as important as your machine. If you buy an attachment off the internet or at a discount store, who is going to service it, provide parts and complete your warranty? Bobcat Company supports its attachments better than anyone. We are your one-stop shop for your attachment parts, service, finance and warranty.

24

anora ic erviceability Bobcat loaders are designed to provide the fastest, easiest maintenance

in the industry. Engine checkpoints are within easy reach - so daily

maintenance actually gets done. Unparalleled access to routine and

long-term maintenance points makes preventative maintenance

simple, reducing your operating costs and adding to

your bottom line.

Full-Access Serviceability Our large, swing-open tailgate provides convenient access to routine maintenance points. There are no radiators to move, lift arms to raise or lift-arm support devices to install.

Higher combustion pressures generate more torque. Bobcat engines have a robust combustion chamber that handles more pressure and produces more torque than ever before, meaning better performance for pushing, digging, lifting and operating attachments.

A Wider Range ol Power Bobcat engines generate the most torque across a much wider rpm range than other engines. Our engines can stay in the peak torque range longer,

Protective Tailgate The one-piece, 1/4-inch steel tailgate door protects loader components from jobsite hazards.

Tip-Up Cab For non-routine service, simply remove two nuts and tip back the cab to access hydraulic and hydrostatic components in minutes.

Tier 4 Solutions When Tier 4 emissions standards required every equipment

manufacturer to make equipment changes, Bobcat designed

a non-DPF Tier 4 solution that also delivers new features and

provides more performance to customers.

ng yo or performanc Operators of every skill level can better utilize full engine performance to get more work done.

Simple, State-of-the-Art and Non-DPF The biggest advantage of our Tier 4 solution is simplicity. Bobcat engines meet Tier 4 regulations without a diesel particulate filter (DPF). This reduces downtime that occurs with DPF regeneration and long-term DPF maintenance costs. That allows operators to focus on working.

Go to Bobcat.com/Tier4Engine to learn more about the Bobcat engine features and performance

Improved Machine Shutdown Protection Monitors coolant and oil temperatures and prevents them from reaching a critical point of shutdown.

Cold Weather Engine Protection Protects your machine from working too hard before the engine is properly warmed up.

Lower Operating Costs and Reduced Noise An auto-idle function on SJC-equipped machines reduces noise levels.

Precision Grading Compact loaders are commonly used for grading, and

Bobcat does grading better than any other brand. Bobcat

manufactures the most productive box blade and grader

attachments in the industry, but we don't stop there. Bobcat

loaders give you access to exclusive technology that increases

your grading efficiency while saving material and labor.

Accuracy Within %-Inch Sonic and laser-guided grading systems offer you unbeatable precision that amplifies your profit potential by cutting thousands in material and labor from the job. Bobcat precision grading equipment often pays for itself with just one or two big jobs.

Laser-Guided Grading Your Bobcat loader and the attachment make adjustments automatically, saving you hours of time and thousands in labor and material. Depending on the attachment and transmitter, the laser-guided grading system can grade a flat-plane, single-slope or dual-slope surface.

28

Specifications and Features Compact Track Loaders

loader Series

Rated Operating Capacity (ROC) (35% of tipping load)

ROC with Counterweight (optional)

Operating Capacity (50% of tipping load)

Tipping load

ROC with Optional Roller Suspension

Height to Hinge Pin

lift Arm Path

W1f%Jh!t1M44~ Operating Weight

Bucket Width -Cab Height

Travel Speed- Single Speed

Horsepower

Type

Fuel Tank Capacity

Horsepower Management

Diesel Particulate Filter (DPF) Requirement

Diesel Exhaust Fluid (DEF)

Qtmtlitfiit!f4Mi-Bobcat SmartFAN Cooling System

Machine Shutdown Protection

Miftlij11@@00ih6h -Track Width- Standard

Track Width- Optional

Ground Pressure (with standard tracks)

Ground Pressure (with optional tracks)

length of Track on Ground

Roller Suspension

5-link Torsion Suspension Undercarriage

Grease Cylinder Track Tensioning

Bobcat Standard (Foot Pedals/Steering levers)

Advanced Control System (ACS)

Selectable Joystick Control (SJC)

Radio Remote Control (SJG required)

2-Speed Travel

Heated Cloth Air-Ride Seat

Back-Up Alarm and Horn

Bobcat Interlock Control System (BIGS")

Cab with Heat

Cab with Heat and Air Conditioning

Deluxe Instrumentation (Includes keyless start)

Hydraulic Bucket Positioning

Mechanical Suspension Seat

Front and Rear Work lights

Radio

Reversing Fan Ride Control

ROPS/FOPS Approved Cab Structure

Side lighting Kit

Attachment Control Kit

Bob-Tach Mounting System

Power Bob-Tach System

Fingertip Auxiliary Hydraulics Control

Hydraulic System Pressure

Hydraulic Standard Flow

Hydraulic High Flow (optional)

Pressure Release Hydraulic Quick Couplers

Speed Management

M2-Serles M2-Serles M2-Serles

1400 lb. (635 kg) 19951b. (905 kg) 2100 lb. (953 kg) 2200 lb. (998 kg)

.----------------------------------Counterwelghtkitsareavallabletc

2000 lb. (907 kg)

4000 lb. (1814 kg)

109.51n. (2781 mm)

Radius

6148lb. (2789 kg)

56 ln. (1422 mm)

77.81n. (1972 mm)

7.3 mph (11.7 km/hr.)

11.0

Turbo Diesel

17.3 gal. (65.5l)

2850 lb. (1293 kg)

5700 lb. (2585 kg)

18951b. (860 kg)

114.51n. (2908 mm)

Radius

75571b. (3428 kg)

68 in. (1727 mm)

77.8 in. (1972 mm)

7.1 mph (11.4 km/hr.)

10.4

Tler4

66 hp

Turbo Diesel

36.5 gal. (138.2l)

3000 lb. (1361 kg)

6000 lb. (2722 kg)

1950 lb. (885 kg)

119.0 ln. (3023 mm)

Vertical

7822 lb. (3548 kg)

68 ln. (1727 mm)

77.8 in. (1972 mm)

7.1 mph (11.4 km/hr.)

10.4

Tler4

66 hp

Turbo Diesel

36.5 gal. (138.2l)

31421b. (1425 kg)

6285 lb. (2851 kg)

2050 lb. (930 kg)

119.0 ln. (3023 mm)

Vertical

80551b. (3654 kg)

681n. (1727 mm)

77.81n. (1972 mm)

7.1 mph (11.4 km/hr.)

10.4

Tler4

74 hp

Turbo Diesel

36.5 gal. (138.2l)

~-------------------------Included with SJG Option---------

No

No

Std

Std

Std

11.81n. (300 mm)

4.7 pst (0.032 MPa)

50.21n. (1275 mm)

Std

Std

Opt

Opt

Opt

Opt

Opt Std

Std

Opt

Opt

Opt

Opt

Std

Std

Opt

Opt

Opt

Std

Opt

Std

Opt

Std 3300 psi (22.75 MPa)

16.7 gpm (63.2l/mln.)

Std

No

No

Std

Std

Std

12.61n. (320 mm)

15.75 in. (400 mm)

4.9 psi (0.03 MPa) 4.0 psi (0.03 MPa)

54.11n. (1374 mm)

Opt

Std

Std

Opt

Opt

Opt

Opt

Opt Std

Std

Opt

Opt

Opt

Opt

Std

Std

Opt

Opt

Opt

Std

Opt

Opt

Std

Opt

Std

3500 psi (24.1 MPa)

17.1 gpm (64.7llmln.) 26.7 gpm (101.1llmln.)

Std

No No No No

Std Sid

Std Std

Std Sid

12.61n. (320 mm) 12.6ln. (320 mm)

15.751n. (400 mm) 15.751n. (400 mm)

5.1 psi (0.04 MPa) 5.1 psi (0.04 MPa)

4.1 psi (0.03 MPa) 4.1 psi (0.03 MPa)

54.11n. (1374 mm) 54.11n. (1374 mm)

Opt Opt

Std Std

Std Std

Opt Opt Opt Opt Opt Opt

Opt Opt

Opt Opt

Std Std

Std Std Opt Opt

Opt Opt

Opt Opt

Opt Opt

Std Std

Std Std

Opt Opt Opt Opt Opt Opt

Std Std Opt Opt

Opt Opt

Std Std Opt Opt

Std Std 3500 psi (24.1 MPa) 3500 psi (24.1 MPa)

17.1 gpm (64.7llmin.) 17.1 gpm (64.7l/mln.)

26.7 gpm (101.1l/min.) 26.7 gpm (101.1 L/mln.)

Std Std

Included with SJG Option

M2-Serles M2-Serles M2-Serles

2100 lb. (953 kg) 2570 lb. (1166 kg) 3200 lb. (1451 kg) 3475lb. (1578 kg) 3650 lb. (1656 kg)

J Increase ROC. See dealer on availabilities and ROC Increases for your loader.

3000 lb. (1361 kg) 3670 lb. (1665 kg) 4571 lb. (2074 kg) 4960 lb. (2250 kg) 5200 lb. (2359 kg)

6000 lb. (2722 kg) 7343 lb. (3331 kg) 91431b. (4147 kg) 99291b. (4503 kg) 10,430 lb. (4731 kg)

2100 lb. (953 kg) 2570 lb. (1166 kg) 3100 lb. (1406 kg) 33251b. (1508 kg)

121.0 ln. (3073 mm) 124.0 ln. (3149 mm) 132.0 ln. (3353 mm) 132.0 ln. (3353 mm) 144.0 ln. (3657 mm)

Radius Vertical Vertical Vertical Vertical

8655lb. (3926 kg) 9320 lb. (4227 kg) 10,2631b. (4655 kg) 10,4651b. (4796 kg) 12,9251b. (5862 kg)

741n. (1880 mm) 74.0 ln. (1880 mm) 80.0 ln. (2032 mm) 80.0 ln. (2032 mm) 84.81n. (2153 mm)

81.31n. (2065 mm) 81.31n. (2065 mm) 81.31n. (2065 mm) 81.31n. (2065 mm) 83.61n. (2123 mm)

6.6 mph (10.6 km/hr.) 6.6 mph (10.6 km/hr.) 6.6 mph (10.6 km/hr.) 6.6 mph (10.6 km/hr.) 6.5 mph (10.5 km/hr.)

10.7 mph (17.2 km/hr.) 10.7 mph (17.2 km/hr.) 10.7 mph (17.2 km/hr.) 10.7 mph (17.2 km/hr.) 11.4 mph (18.3 km/hr.)

Tler4 Tler4 Tler4 Tler4 Tler4

74 hp 74 hp 74 hp 92 hp 100 hp

Turbo Diesel Turbo Diesel Turbo Diesel Turbo Diesel Turbo Diesel

43.9 gal. (166.4 L) 43.9 gal. (166.4 L) 43.9 gal. (166.4 L) 43.9 gal. (166.4 L) 32.6 gal. (123.4 L)

Std Included with SJC Option Std

No No No No No

No No No 6.8 gal. (25.7 L) 6.8 gal. (25.7 L)

Std Std Std Std Std

Std Std Std Std Std

Std Std Std Std Std

12.61n. (320 mm) 12.61n. (320 mm) 17.71n. (450 mm) 17.7 ln. (450 mm) 17.71n. (450 mm)

17.71n. (450 mm) 17.71n. (450 mm)

5.3 psi (0.037 MPa) 5.7 psi (0.039 MPa) 4.1 psi (0.029 MPa) 4.2 psi (0.029 MPa) 4.8 psi (.033 MPa)

3.8 psi (0.027 MPa) 4.2 psi (0.029 MPa)

58.5ln. (1486 mm) 58.51n. (1486 mm) 63.71n. (1618 mm) 63.71n. (1618 mm) 70.21n (1783 mm)

Opt Opt Opt Opt Std

Std

Std Std Std Std Std

Std

4 (Triple Flange) 4 (Triple Flange) 5 (Triple Flange) 5 (Triple Flange) 5 (Triple Flange)

Std Std Std

Opt Opt Opt

Opt Opt Opt Opt Opt

Opt Opt Opt Opt Opt

Std Std

Opt Opt Opt Opt Std

Opt Opt Opt Opt Opt

Std Std Std Std Std

Std Std Std Std Std

Opt Opt Opt Opt Opt

Opt Opt Opt Opt Opt

Opt Opt Opt Opt Opt

Opt Opt Opt Opt Opt

Std Std Std Std Std

Std Std Std Std Std

Opt Opt Opt Opt Opt

Opt Opt Opt Opt Opt

Opt Opt Opt Opt Opt

Std Std Std Std Std

Opt Opt Opt Opt Opt

Opt Opt Opt Opt Opt

Opt Opt Opt Opt Opt

Std Std Std Std Std

Opt Opt Opt Opt Opt

Std Std Std Std Std

3500 psi (24.1 MPa) 3500 psi (24.1 MPa) 3500 psi (24.1 MPa) 3500 psi (24.1 MPa) 3500 psi (24.1 MPa)

23.0 gpm (87.1 L/mln.) 23.0 gpm (87.1 L/mln.) 23.0 gpm (87.1 Llmln.) 23.0 gpm (87.1 Llmln.) 23.0 gpm (87.1 L/mln.)

30.5 gpm (115.5 L/mln.) 30.5 gpm (115.5 L/mln.) 30.5 gpm (115.5 L/mln.) 36.6 gpm (138.5 L/mln.) 36.6 gpm (138.5 L/mln.)

Std Std Std Std Std

Std Included with SJC Option Std

29

30

28' 27.8" 28.8' 28.8' 31'

8.4ln. (213 mm) 7.4ln. (188 mm) 7.4ln. (188 mm) 7.4ln. (188 mm) 8.1ln. (206 mm)

50.2 ln. (1275 mm) 55.2ln. (1402 mm) 55.2ln. (1402 mm) 55.2ln. (1402 mm) 59 in. (1499 mm)

98.4 in. (2499 mm) 104.6ln. (2657 mm) 104.6ln. (2657 mm) 104.6ln. (2657 mm) 108.4ln. (2753 mm)

126.6ln. (3216 mm) 133ln. (3378 mm) 133ln. (3378 mm) 133ln. (3378 mm) 136.8ln. (3474 mm)

28' 30" 30' 30' 31'

83.8ln. (2199 mm) 86.8ln. (2205 mm) 91.3ln. (2319 mm) 91.3ln. (2319 mm) 93.2ln. (2367 mm)

23.5 ln. (597 mm) 19.3 ln. (490 mm) 34.9ln. (887 mm) 34.9ln. (887 mm) 24.1ln. (613 mm)

109.5ln. (2781 mm) 114.5ln. (2908 mm) 119 in. (3023 mm) 119 in. (3023 mm) 121ln. (3073 mm)

40' 42' 42' 42' 42'

91' 97' 97' 97' 97'

56.0 ln. (1422 mm) 68ln. (1727 mm) 68ln. (1727 mm) 68ln. (1727 mm) 74 ln. (1880 mm)

77.9ln. (1979 mm) 80 ln. (2032 mm) 80 ln. (2032 mm) 80 ln. (2032 mm) 88.1ln. (2238 mm)

43.2ln. (1097 mm) 54.4ln. (1382 mm) 54.4 ln. (1382 mm) 54.4ln. (1382 mm) 60.3ln. (1532 mm)

55.0 ln. (1397 mm) 67ln. (1702 mm) 67ln. (1702 mm) 67ln. (1702 mm) 72.9ln. (1851 mm)

31' 31° 33'

8.1ln. (206 mm) 8.1ln. (206 mm) 8.1ln. (206 mm) 9.8ln. (249 mm)

59 ln. (1499 mm) 63.7ln. (1618 mm) 63.7 in. (1618 mm) 70.2 in. (1783 mm)


136.8ln. (3474 mm) 141.6ln. (3597 mm) 141.6ln. (3597 mm) 153.9 in. (3910 mm)

31' 32° 32' 30'

96.3 ln. (2447 mm) 104.3ln. (2649 mm) 104.3ln. (2649 mm) 107.41n. (2728 mm)

34.2 ln. (870 mm) 33.61n. (853 mm) 33.6ln. (853 mm) 36.5ln. (927 mm)

124ln. (3149 mm) 132ln. (3353 mm) 132 ln. (3353 mm) 1441n. (3657 mm)

42' 42° 42' 37'

97' 980 98' 98'

741n. (1880 mm) 80 ln. (2032 mm) 80 ln. (2032 mm) 84.81n. (2153 mm)

87.71n. (2228 mm) 881n. (2235 mm) 881n. (2235 mm) 991n. (2514 mm)


72.9ln. (1851 mm) 781n. (1981 mm) 78 ln. (1981 mm) 82.8ln. (2103 mm)

Training Resources Train operators and technicians in the safe operation and servicing of Bobcat equipment. Operator training courses, safety videos and other training materials are available at your Bobcat dealer's parts department or online at Bobcat.com/training

•certain specification(s} are based on engineering calculations and are not actual measurements. Speclfication(s) are provided for comparison purposes only and aresubjectta change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.

PIONEERING MANEUVERABILITY Bobcat introduced its first compact loader in 1958, and two years later, the world's first skid-steer loader. This created an entire industry of machines that put the power of large equipment in a compact size with unmatched maneuverability.

OFFERING MORE VERSATILITY In 1970, Bobcat invented the first quick-change attachment system for skid-steer loaders, known as the Bob-Tach mounting system. Today we offer more attachments than anyone in the world, empowering customers to transform all of our machines into multitasking attachment carriers and reach higher levels of production.

ONE TOUGH ANIMAL® All over the world, Bobcat equipment is known for being durable and dependable. By lasting longer and minimizing downtime, we help our customers become as successful as possible.

HELP WHEN YOU NEED IT With over 50 years of experience and more than 550 locations, we offer the best dealer network in the country for compact equipment. Our dealers offer a quality sales force, dependable parts departments and qualified service technicians, all leading to a quality customer experience.

A CONSTANT INNOVATOR In the late 1950s, a turkey farmer needed help- so in 1958, we introduced what was to become the world's first skid-steer loader. We created an industry by listening to the needs of the customer. This focus is the same today. In 2000, a superintendent needed help- so we built the world's first Toolcat utility work machine. We continue to be a global leader in innovation by listening to our customers.

Compact Skid-Steer Wheel Loader Loader

1958 1960 1970 1986 1999 2001

Bobcat. com

2003

LEADER BY DESIGN Listening to the customer and a pioneering spirit are why Bobcat continues to lead the evolution of compact equipment ... 1960 - Invented the FIRST true skid-steer loader. 1970 - Invented the FIRST attachment mounting system for

skid-steer loaders. 1977 - Built the FIRST skid-steer loader with no chain

adjustments required. Still a Bobcat exclusive. 1981 - Introduced the FIRST secondary restraint seat bar. 1983 -The FIRST skid-steer loader with a transversely mounted

engine. Still a Bobcat exclusive. 1990 - Introduced the FIRST compact excavator manufactured

in the U.S. 1999 - Introduced the FIRST compact track loader with a

solid-mounted undercarriage manufactured in the U.S. 2001 - Invented the FIRST loader with all-wheel steer and

skid-steer capabilities. Still a Bobcat exclusive. 2003 - Revolutionized the way the world works with the invention

of the Toolcat line, the world's FIRST utility work machines -a cross between a pickup, attachment carrier and utility vehicle. Still a Bobcat exclusive.

2006 - Introduced the FIRST utility vehicle with Rapid link'" attachment mounting system.

2008 - Roller Suspension, the FIRST all-steel suspension system, was introduced.

2009 - Launched M-Series compact excavators and loaders. 2011 - The M-Series loader models S850 and T870 became the

largest and most powerful in our lineup. 2012 - Bobcat introduced two new sizes of extendable-arm

excavator options that are both attachment and clamp-ready.

2013 - The M-Series 500 frame-size loaders replaced the popular S185 and T190 (among many others). This loader size is the most popular in the world and has been for two decades.

2014 - Bobcat launched the 400 frame-size loaders, completing the M-Series line; manufactured its one-millionth loader; introduced its own Tier 4, non-DPF engines; and opened the Bobcat Acceleration Center, a dedicated innovation, testing and technology facility.

2016 - Launch of the M2-Series loaders. Today - There are more Bobcat skid-steer loaders at work around the

world than all other brands combined. Today - Bobcat manufactures more attachments than anyone

in the world. Today - Bobcat is the only company that offers operator training kits

for compact equipment. Today - Bobcat offers a full range of extendable-arm options, three

sizes fitting five different excavator models. Today - Compact track loaders are rapidly becoming the product of

choice in many market segments. Today - Launch of the R-Series excavators.

2006 2008 2009 2014 2016 2017

31

•'\ \.., PrlntedonW> recycledpapu

B-1959 (09/18)

NOTE- Where applicable, dimensions are in accordance with ISO standards. Specifications and design are subject to change without notice. Pictures of Bobcat units may show other than standard equipment. All dimensions are given for loader equipped with standard tires. All dimensions are shown in inches. Respective metric dimensions are enclosed by parentheses. Bobcat Company complies with the requirements of ISO 9001 as registered with BSI.

Bobcat is a Doosan company. Doosan is a global leader in construction equipment, power and water solutions, engines, and engineering, proudly serving customers and communities for more than a century. Bobcat0 , the Bobcat logo and the colors of the Bobcat machine are registered trademarks of Bobcat Company in the United States and various other countries. ©2018 Bobcat Company. All rights reserved.

Bobcat Company ~Bobcat

P.O. Box 6000 • West Fargo, ND 58078 Bobcat.com Printed in U.S.A.

One Tough Animal

Kn·16M·0918·59336-19-F

Hydraulic Control Options

Bobcat Company offers you options for controlling loader hydraulic functions:

• Standard Mechanical Foot Pedals

• Optional Selectable Joystick Controls (SJC)

ISO Pattern Controls H-Pattern Controls

• Optional Advanced Control System (ACS)

Advanced Hand Controls Advanced Foot Controls

Standard Mechanical Foot Pedals Simply put your feet on the pedals and keep t them there any time you operate the loader. The pedals control the hydraulic lift and tilt functions. "Float" is activated by toeing the left pedal into a detent position.

Selectable Joysliclt Controls State-of-the-art, low-effort Selectable Joystick Controls (SJC) have a natural feel and are easy on the operator. SJC provides more comfort with less fatigue, allowing the operator to work longer and more productively.

"Selectable" refers to two different patterns controlled by the joysticks: ISO Pattern and H-Pattern.

Electronic Joysticks Electronic joysticks provide flexibility in acceleration and deceleration for optimum loader performance. They also allow two control patterns in one machine by simply pressing a rocker switch.

When operating the loader in ISO Pattern: The left joystick controls drive functions while the right joystick controls lift and tilt functions.

FORWARD LL

me-t-= oc-t~"' I I

REVERSE LR

CRR = Counter-rotate to the right CRL =Counter-rotate to the left LR = Lift arms raise LL = Lift arms lower BC =Bucket curl BD = Bucket dump

When operating the loader in H-Pattern: Fore-and-aft movement of the left joystick controls the loader's left-side drive, while side-to-side movement controls lift. Fore-and-aft movement of the right joystick controls the loader's right-side drive; side-to-side movement controls tilt (similar to the Advanced Control System option when in the hand-control mode).

FORWARD FORWARD

~~~- ~ oc-t~"' I I

REVERSE REVERSE

Select your work pattern for greater efficiency, less fatigue.

LR = Lift arms raise LL = Lift arms lower BC = Bucket curl BD =Bucket dump

Left Joystick Right Joystick

SELECTABLE JOYST/Cllrr~.)~ .., il/C il£jiJY

Bobcat joysticks are state-of-theart, providing ease of operation with little effort.

Selectable Joystick Controls offer unique functions to increase efficiency: Horsepower Management The Selectable Joystick Control system automatically adjusts the loader's drive system for maximum pushing and digging power. Some competing systems limit drive torque, allowing the engine to keep running but significantly reducing the loader's pushing power. However, the Bobcat® horsepower management system lets the operator obtain maximum engine and drive torque to match the toughest working conditions.

Hand Engine Speed Control with Accelerator Foot Pedal While the Hand Engine Speed Control lever may be set at specific throttle positions, the foot pedal control can increase engine speed on demand, as needed. The foot pedal allows operators to run the engine at a slower speed to save fuel or reduce noise. It also lets the operator increase engine rpm when more power or speed is required.

Drive Response Drive Response changes how responsive (more or less) the loader's drive and steering systems are when the operator moves the joystick(s). Drive Response can be changed by the operator for different drive response preferences and various

Selectable Joystick Controls give you everything at your fingertips, including Speed Management that allows you to do delicate work with heavy loads.

job conditions and attachment use. Changes to drive response do not affect braking or stopping the loader.

Speed Management Speed Management (bottom button on the left joystick) permits the loader to be maneuvered at slower travel speeds. When Speed Management is engaged, the machine will travel at 57% of standard travel speed. Travel speed can be increased to 99% or decreased to 1% of standard travel speed. Operators can save adjustment time and match the demands of specific applications by changing the factory default Speed Management setting of 57% to any setting between 1 and 99%. Full joystick movement can be used while the machine's speed is reduced for more efficient digging and pushing, as well as easier loading, unloading, working in tight spaces, and attachment hookup.

Multiple Fingertip Functions Bobcat joysticks permit fingertip control of many functions, including:

• Normal- and high-range travel speed (if loader is so equipped).

• Auxiliary hydraulic functions.

• Optional horn and turn signals.

• Speed Management.

• Lift-arm float control.

Operator-Friendly Controls Good equipment operators are hard to find. Comfort is an important factor in keeping operators happily employed -and a comfortable operator is a more productive operator. Bobcat loaders equipped with Selectable Joystick Controls help satisfy the needs of operators and the demands of the job in today's changing marketplace.

Advanced Control System With ACS, you can have the right loader for many operators- and many jobs! The Bobcat Advanced Control System (ACS) lets loader operators use a dash-mounted switch to instantly select between advanced hand control or advanced foot control of lift and tilt functions.

ACS is designed to accommodate more loader operators! Whether operators prefer to control lift and tilt functions by hand or by foot, ACS gives them an instant choice at the flip of a switch. Here's the opportunity for fleet owners to give operators the machine controls they prefer.

• Select advanced hand or advanced foot control at the flip of a switch.

• Accommodate operator preference.

• Easier to hire operators regardless of control preference.

• Save on inventory- use one machine instead of two.

Advanced Hand Controls The handles on each steering lever pivot 15 degrees right and left for easy operation and less operator fatigue. The left handle controls the lift arms. Move it left to raise the lift arms and right to lower. The right handle controls attachment tilt. Move it right to dump a bucket or tilt an attachment forward. Move it left to curl the attachment back.

Put more control in the palm of your hand with Bobcat Advanced Hand Controls! • Total hand-controlled hydraulics. • Easy operation. • Sensitive, precise control of all loader functions. • Two comfortable hand positions. • Less operator fatigue. • Electronic components are double-sealed against extreme

temperature and humidity. • Integrated safety features.

In tile "float" position, the lift arms follow the contour of the terrain when leveling and back-dragging.

Advanced Foot Controls • Total foot-controlled hydraulics.

• All-electronic system.

• Easy operation.

• Sensitive, precise control of all loader functions.

• Electronic components are double-sealed against extreme temperature and humidity.

• Integrated safety features.

Bobcat Company ~Bobcat. B-1646 (1/09)

P.O. Box 6000 • West Fargo, ND 58078 www.bobcat.com

Printed in U.S.A. Kn-1 OM-1 09-#14457 -F

LOOK INSIDE FOR

genuine Bobcat® attachments

iii '

: ~ 4f iliili m~" ; .' i;

~ ' ' ' . ~, ~ I N 0 E K ( ,1 ,. . , ' · I N 0 E K 5

HAVE AN

ATTACHMENT FOR J:

COMPACTEXGAVATOR ATTACHMENTS · , . , : ,' VEHSAHANDLER~TELESGOPIC TOOL CARRIER ATTACHMENTS • , AUGER 6 FlAIL MOWER 13 RIPPER 16 ANGLEBRO!l\1 16 GRAPPLE, INDUSTRIAL 46 SNOWPVSHER 64

BREAKER, HYDRAUliC 8 GRAPPLE. THREE-TINE 16 SWING ACCESSORIES 16 AUGER 20 GRAPPLE, ROOT 48 SNOWBLOWER 66

BUCKETS 10 PACKER WHEEL 14 TRENCHER 17 BALE FORK 25 PALLETFORK 54 SOIL CONDITIONER 66

CLAMP 14 PLATE COMPACTOR 14 BUCKET, COMBINATION 36 SNOW BLADE 62 SWEEPER 72

DEPTH CHECK ACCESSORY KIT 12 PRO CLAMP- SYSTEM 15 BUCKETS 32 SNOW BUCKET 59 TRUSS BOOM 17

- COMPACHOADER ATTACHMENTS • ' • R.AIL CUTTER 41

3-POINT ADAPTER 74 DUMPING HOPPER 40 SNOW PUSHER 64 TOO[GAT .. UTiliTY WORK MACHINE ATTACHMENTS • • ANGLE BROOM 18 FlAIL CUTTER 41 SNOW V-BLADE 65 3-POINT ADAPTER 74 GRADER 44 SNOW PUSHER 64 AUGER 20 FORESTRY GUTTER 42 SNOWBLOWER 60 ANGLE BROOM 18 GRAPPLE, INDUSTRIAL 46 SNOW V-BLADE 65 AUTOMATIC GRADE CONTROL 22 GRADER 44 SOD lAYER 65 AUGER 20 GRAPPLE, UTiliTY 49 SNOWBLOWER 60 BACKHOE 24 GRAPPLE,INOUSTRIAL 46 SOIL CONDITIONER 66 BALE FORK 25 lAND PlANE 51 SOD LAYER 65 BALE FORK 25 GRAPPLE, ROOT 48 SPREADER 68 BOX BlADE 26 lANDSCAPE RAKE 50 SOIL CONDITIONER 66 BORING UNIT 27 GRAPPLE, UTiliTY 49 STEEL TRACKS 70 BRUSHCAT ROTARY CUTTER 30 MOWER 52 SPREADER 66 BOX BlADE 26 LANDPLANE 51 STUMP GRINDER 71 BREAKER, HYDRAULIC 28 lANDSCAPE RAKE 50 SWEEPER 72

BRUSH SAW 31 MOWER 52 TILLER 75 BRUSHGAr' ROTARY CUTTER 30 PALLET FORK 54 TILHATCH" DEVICE 34

BUCKET ACCESSORIES 34 PALLET FORK 54 STUMP GRINDER 71

BUCKET, COMBINATION 36 SCRAPER 56 SWEEPER 72

BUCKETS 32 SEEDER 56 TILLER 75

BUCKET ACCESSORIES 34 PLANER 56 TREE SPADE 76 CHIPPER 36 SNOW ACCESSORIES 63 TJLT-TATCH DEVICE 34

BUCKET, COMBINATION 36 REAR STABiliZER 70 TRENCH COMPACTOR 79 DOZER BLADE 39 SNOW BlADE 62 TRENCHER 76

BUCKETS 32 SCARIFIER 58 TRENCHER 78 FLAIL CUTTER 41 SNOW BUCKET 59 UTILITY FORK 60

CHIPPER 36 SCRAPER 58 UTILITY FORK 80 CONCRETE MIXER 38 SEEDER 58 VIBRATORY PLOW 81 ANGLE BROOM 63 PALLETFORK 64

CONCRETE PUMP 38 SILT FENCE INSTALLER 58 VIBRATORY ROLLER 81 BUCKET 83 SNOW BLADE 84!

DIGGER 38 SNOW ACCESSORIES 63 \VATER KIT 82 GRAPPLE 64 SNOW V-BLAOE 85

DOZER BlADE 39 SNOW BLADE 62 WHEEL SAW 82 LANDPLANE B4 SNOWBLOWER 85

DROP HAMMER 40 SNOW BUCKET 59 MOWER 64 SPREADER 65 Kncwwtr;il'abelow.

Calberw.~dJ!i,

~ Bobcat ··-=--~""·-··rl~., -q>llo • \b!J!.ohat='!".Jc=i'"'7""""'*'"'"..o·~ono ra-~"-"<nd..L...-"""~~=-•"'rl,..-<i-= ~Bobcat. \6l!ll.o~at=,lc""'''""'~loilo.,._.d.,.o

~Bobcat. kr«C~'""'"''~~ ...... ...t~•""'"'"-"'•b--->'7' ''-"' ~~,..'-"~"""""'"Pif'T-"'fol\o=•-<f.~ .. •

DIG HOLES FASTER AND DEEPER.

Dig deeper and faster- even in hard, rocky soH -with the Bobcatv auger attachment.

MORE DEPTH A drive unit that follows the bit into the hole provides up to 121nches of extra dig depth.

DIRECT OR PLANETARY DRIVE low-maintenance d.recHirive models give you excelfeot torque and rpm for reliable digging performance in many soU conditions.

Planetary-drive augers provide extra power and torque for anchor applications and extreme ground conditions, lnc!ud1ng rock, shale, clay or frost.

VERSATILITY Bobcat attachment mounting systems allow you to use your auger on multiple carriers.

KHUCKLE·JOIHT OESIGH Oig vertical ho~es on

uneven terrain.

BITS AHD TEETH Match the tool to the job; 6- to 48-inch diameters available:

liGHT DUTY STAIIDAHD DUTY HfAVY DUTY HOCK DUTY

-~~-·_,~-~-I ____ ll --f_f ~ t~ r .... t'rl ?f•

Bo bcat.com/ Auger

I.'«SlO Lrn

~'o:=i'l

"" 1~91

1/t:del 3QCr..;OH "" '·'«~ "" ''"'"'

iiiMiijJ·Il!liiJ!.!j.llf'fF

""' Art:llwthr~ilt,~'j~&"'JdQ:tf\lcr

:twlwll.Upto24·111_rt...,..,.-mbts..

llo1.u&tD~-!3"•'tCwrv~,ts,

'"" ltcly!DIIi"'dta;:;r;~;;'"IC!b.JJ.'lC"9.l.rQ- 620. llp!D36~n.~trh.

ll.Y(!,h.<Jf\al-G!Jt'.;gngl'"m.'Qh ~~;m,fros:tormp';l,liOro!fur~-s:.e cL•TtOWblla1dta-t:rr~nwc:tcr<S.

lrN Edr~flCIU"..do;;-dlmJ!~r!Xk,:Y-"d, n~

d::Jutt:llkletfttwrtu~cat=

9.2n{l3Jrrn) 10.2n{28Jrrn)

t0n.(254rrm) 12in.{305m1)

1SOb.{e.31.g) 22Qlb.(100f..J) o:~m

·~· Or<ct

"""' n~, """ 1021'p"l """' """' """' """' "''""' """' 70rpm

"'""' 1021ttAil.(l!i2lltn} 1:300ft-!l:l (1To31t11) 2510itAll.{H111/m.)

1225ft·lb.j1fS11i"'l) 1~0fl.,'h{21151h) 30:241t~:::t.(4100/hl)

lJ13tVb (18€81h!) 1755fl..J!:l {2J79fl11J J.mft-,'!:l(~21llh)

153:2ft-t!l.(ro771oln) 1950fVR(2644/in) 37t:Oft~h{51251h)

2415ft-tL{Z003/Im) 415-Sit..Jll.($38/ITCI)

2275ft·tll.(3{1a4/l;n) ~l(lft-!::1.(59791~)

61n.9n,121n.,15n,1611,24L-r.,:W.n.,:>So1.

6n,9h..12i1.15n,16i<,24>"1.,:l1Ji1.,3S:O.

1Bn.24~c,3!Jin..,36n

6h.9h.12n..l6h.,l.:I";I.,:2!Jlt..Nh.3'l\L :>Si't..Q'n

6<11..,9m.,12n..,16n,1Bn.,201n..,N111.,30rn.

Bobcal.com/Auger

COMPACT fXCAVATDR

12h(305nmJ t2rttl05rrrn)

297lh(134!-.g) Z99tt.!ll51.g)

P".rib'y ?".a-rtry

"""' """' """' """' .,..,. """' 17rpt~ 61rpm

"""' """' 87rp.n """' """' """' g.arpn """' 2Jatfl-!ll.{32371in) 302Jfi·lb.(4100/11l)

U54ft-".t1.(3«!411m) ~a!l-r!I.(4S:ZO,n)

Jti)Jfi·ll.(41Vai11!J 39llfl..Jtt.(S3-.'l(l/ln)

3819fl·b.lS179/tn) J02J!l·!ll.{-11001h) 4117fl·lb.(5@41h) ~9lft-rJ..{71751kn)

D!GG!IJG DEPTH WITHOUT EXTE/lS!OIJ

6-48 INCH OlA/,lETEil fliTS AVAllADLE

~='="'''i>'L-<·•-d•~...,_,JJ<<n"'-""' ;0: ~~ .. t..<=<~o..,.p"'f·"'!o.!t•=·o-d-~-.~ ~Bobcat.

~ ' ' ~ i ~ !!l"""i";';f.._

~ 8 . B R E A K E R , H Y D R A U Ll C ':J ,;, . . ·• ·. · I B R E A K E R , H Y D R A U Ll C 9 B0n I > ;;

COMPACT EXCAVATOR

BREAK CONCRETE FASTER AND CUT THROUGH ROCKS EASIER.

CONSTANT POWER. CYLINDRICAL BREAKER CRADLE CONSISTENT PRODUCTIVITY. Th\s design Improves job access and accuracy In confJned areas. Most other manufacturers' breakers fire the piston wlth

EASY MOUNTING AND CARRIER VERSATILITY compressed nilrogoo, which ~subject to teaks during usa that Quickly mount and remove, or switch from a loader to decrease perlormaoce. Bobcat~ breakers use hydraul!c oll flow

to fire the breaker while nitrogen assists the piston's rell.m excavator and back, with the Bob-Tach1'1 and X-Changa~· attachment mounting systems. to lha firing postt!on. H)'lfraullc oil cools lha piston and breaker

walls, preventing v,rear and extending the life of your attachment. LOW·MAINTENANCE DESIGN This design def!Ve!S peak. pmver whle requiring less rocharging The breaker has only 12 main service parts, meaning fev;er and virtually no energy~chamber maJntenance. breakdowns can occur, and if they do, the breaker Is easy to

repair, right In the field.

Bobcat.com/Breaker

INCLUDED GO/NO·GO GAUGE Quickly check the gauge to see whether tt's time to replace critical components. There's no measurtng required.

SINGLE LOWER BUSHING All models have just one lower bushing that Is easy to replace.

AUTOMATIC POWER REGULATION Automatic pressure regulation further ensures consistent perfonnance, regardless of changes In outdoor temperature and across multiple carrier types. It also limits excessive pressure at the time of start-up, preventing wear and potential downtime.

"'""--""""- €0ft-'Jl(a!J)

(;;•.~Toal~jfbtn9 59fl·lb{59J)

ffi:ttAI'ei!Ls:.te 1290@6ji;lll

Flcwfteq~:rernerts l-£9"1

(tHJUm)

OPTIONS AND ACCESSORIES BREAKER BITS:

A wide variety of breaker tools ensures you ran

always use the right toot for the task at hand.

t9Jil·b.(ZOOJ} 300ft·b{4a7J)

143fl-:U.{t94J) 207fl·1b.(282J) t~oetJwn 13!0@17QPJ11

7·13Q1lrn a.t7Q?m (Z0.~9Urrm.) (30-64Ur.m)

~Era.lsf'~W't!Ccrltrrt:.

Re!:;cr.me~Eled 1·41it 2-4m. 4·10111._ WOrt-1Tt£;;r;s:s (25·100n11) {50·100mm) (t.00·250rn"l'l)

~rn::JshedVot~l'eltfmr

tton-Re'Ck~ed 1-2)'11.11'1\r. l-4)1i1fhr. 4·12)tl1/hr.

(llll-t5m'/1lr.) (011-llm'ltir.) (3.1·92M'Ihr.)

""""" 1·2)'d.lfhr.. J.l)'li'f'ht 1-4)d'lrr.

{O.B:·lSm'/tv.) !Ua-2.Jm'fr;!.) {Q.l!-3.!m'/lr) VR<.th

8Fu.i>JlrwtJIUJf'o1::tw;:t !001!1.{7311J:l 4261!1.(152.1\[l 5SOib.{2631oW Eiraiall:rfl;unJC;l;;

l.!r<a'<.erwtJNalPnrt, Elr."I~rfi•"ngCa;llnl 6321!:t(2a7f:ul Willi {334~.g) u.ter)'...Q>_;j.·!Jilrnme

D="lSUl$. l£;r.tl(A) 4tl3h.{1024rrn) 49.7in.(12621Wl) 57.5n(1451mn) (iYtllfn:J;E:rfungC~)

Ttdl.erl)t:l!BJ tn.6n{?£9n:.rn} 1311.jl-"6nn) 13m.(330~~n)

Brea.lslr~!(C) 5.2n(13lmm) 7.Jm_(1&5rrrn) 8.4n(214rrn) Cr.li!eru:rmr Tl:ldfrllrr.:tfr 1.5n{31mm) 2.2n(551rnm} 2£Jt{65rTn)

COMPACT EXCAVATOR

60-1,000 FT.-LB. H.1PACT EllEflGY CLASS

.5rofl-ltl(5SDJ) 751lfl4!.(1016J) R!DR.~llj1152Jj lilOOit..O.(!JSOJ)

2i32ft-lh.(382J) 3841l-lb..{~2J) 51Sfl·:b.(100Jj 7001l-'.!l.('a50J)

l45Jl(li211P!l 12£0@261!::rm 12J0032!jV1'1 1110@33mm 12·21{;lm 15-26Q:.Y11 17-32QP-"1 20·33~P'!1

(45-BOUrmt) (57-!!Wrn1")) (65·121Limrt) {76·125Umrt)

6·14ht e-tstn. 10·1Bin. 12-20lll (15()-3S0m."n) (150·350m"11) {25<l-455m'11) (305-5D0rrt1l)

5-IS)tU/hr. 6·15yd.1thr. B-18)11!/hr. 10-2Qyd1fhr. (31!-tLSm'thr.J (4.S-tl.5m'lhr) (G.1·1l8m'rtrr.) {7.6·15.-lm'lhr)

2.£)1i'itT. 2-J'jlllfhr.. 3-8jl1'ftr. 4.S)'d'ltr. (1.546m'itr) lt5-5_4m'lhr) j2..3·!Um'f1xt.J (l.1.£.9!fi/t"t)

no!ll.tl271IID 61Sb.IJ72.llg} l0111b.(459~) 1005b.HSU.Ill

10821!1 (490~.ql 1130lh(51Jk{l)

EOJI'l{1542mm) 64.9m.{1B47mm) 67.5ln.{1713rrrn) 71.Jl'\{1811f'nl)

14n(356m1) 16m.(.:.00mrn) 17h(4J2rrrn) 18h{4571T11)

81lln.{22Jrwn) 9.5ln.{N1mm) 9.6•n.(244rrrn) 91m.(2~f'nl)

Ul1!"!(72Jrrn) 3m{17mm) 3Ao'\(B!inrn) 3.8in.{95mrn)

Appund Mathhu: Sl<d·StferloarW,Compa::t Tro.tk~-er, A'i-\'11-ffi St<erlroder, ,,. til &tador, 1.';, Tro...""\Lroder

Bobcal.com/Breaker

COMPACT EXCAYATOfl

MAKE QUICK WORK OF ANY DIGGING CHALLENGE.

Optimize the productivity of your Bobcatv excavator with the right bucket for the job.

Nmvly redesigned trenching buckets and an aU-new grading bu<:ket line from ctass 2 throughcoss 6 (models E26 -E85) offer increased dtmlb1<y and reliability, maximum d:gging with h1ghcapacity, and illCfeased ease of cteaoout. Thereplacea~esldecutrerhas beooremovedoobolh trencfing and grading models, and a scalloped cast side cutter has been added for durability and functionality. Grading and trenching buckets can be easily interchanged using the X-Change'"' attachment mounting system that Is standard on most Bobcat excavatorn or the optional Hydraulic X-Change system for even faster attachment changes to boost prodtH::tivity.

HEW TREHCHfHG BUCKETS Redesigned trenching buckets offer the strength and durnbility needed for severe d1gging and prying. Buckets 18 Inches and wider have an X-Change reinforcement plate.

HEW SMOOTH•ltP X·CHAHGE TREHCHIHG BUCKETS Want excellent digg·ng performance without weld-on teeth? Smooth-lip trenching buckets now offer a reversible, replaceable cutting edge as standard equipment.

HEW GRADING BUCKETS Grading buckets featlKe no center gusset, replaceable cutting edge, increased capacity and updated widths: 36, 48 and 60 inches. Pair with Hydra-Ti!C' or PowerTilt<l swing accessories for more rnnge of motion when digg:ng around or under objects and shaping landscape features.

PIH·OH BUCKETS Bobcat offers pin-on standard-duty and grad:ng buckets for the E1 0, E20, E85 and the backhoe attachment.

Power71/F is a registerod trademark of Hefac COrporation.

~Bobcat. f'.;;r;;r;;-,•c,_.,T4~,J.,--... .,.-,j •• ,,\-,_-_,-,.f,..,.-~>:T> ;"'<&bul£=/o..,..,..-r;r~!oJto"""'-d-"'' Bobcat. co m/1.1 X Hucke t

COMPACT EXCAVATOR

DURABILITY TO CONQUER

' I

Bob ca I. co m/M XBuc ke I

MORE TOUGH JOBS.

CHING BUCKETS

WELD·OH CUTTtfiG EDGE Provides longer life to yourbuckllt.

WELD·ON SHANKS Offer strength and durability.

X·CHAHGE" REINFORCEMENT PLATE (16-lnch bucket and up) Adds durability for severe digging and prying app1ications.

/J¥J:MIIII'I"l3~a:!~~~~~~~~~~~~~IIUI!!~,II ~~~~ (2z!:~nnrn) 2-4 f'41~n i

IO.:~.nn 12-2~m.. j tE2iiJ {:lf!S-E10m) 3-5 x-cre.-.;e I,

~~~S.WJ (~2_g74~J J.6 X-0&-.,e

!o:nsl'l i{E42,E4S,E!i0, IE5S,EEO,E63)

12-::Qin.. (305-914rrn)

1o:u:oV 18-zti•r~ :(ES5.E63) (457-914m<~J

IO.;ss'o1 18-::Q!n {EB5) (45J.914f1'1;'ll)

iS-= Sl.nbti,O=Qrol:m.-=lk.tAf?/a."{e

J.6

·~

"""'•''~-7tdd.-..,,·d~.,:;.,-_,.,orr,.-_,,., '""'"'*""~"""=1'""1-h>!o.'l<mU-d-"''

x-on-.,;e

X~

P.n.01

!

~Bobcat.

. ' X ~ " '8 ~p";; ';t: -: 12. DEPTH CHECK ACCESS DR V K I'J',~ .... . .·. • · I FLAIL MD WE R 13

COMPACT EXCAVATOR

SAVE TIME AND REDUCE ERROR WITH THE BOBCAT DEPTH CHECK ACCESSORY KIT.

The Bobcat" depth check accessory kit for compact excavators improves profitability by minimizing the tendency to over~ and under-dig. With an accuracy of ±0.5 inches, it's a superior and affordable option for achieving grade or meeting minimum cover specifications.

INTEGRATED WITH THE BOBCAT DELUXE INSTRUMENT PANEL When you have deluxe Instrumentation Installed on your Bobcat compact excavator, there are no display screens or control panels to Install. The deluxe ilstrument panel provides comp!ete control and job monitoring, Including:

• Distance to target

• Grade check

• Depth check

FULLY WIRED FOR SIMPLICITY AND ACCURACY The simp~. durable deplh chock accesSOI)' kit from Bob<:at Is wired, so Job conditions or wireless slgnal loss will never Interfere with your accuracy.

• Reduces the lag time of the signal transmission from the sensor to th& deluxe Instrument panel display

• Malntalns a strong signal even when submer!}{!d In water

• No batteries to charge and malntaln

The Bobcat depth check accessory kit Includes position sensors for the boom, arm and bucket, and all necessary harnesses. Optional laser receivers provide even more f!e>.ib!lity.

~Bobcat.

+0.5tNCH GRADE ACCURACY

~----------~-·-----·

""'"'~"'"""'"",:L~4ut<l~~ .. ,,.,t,,... ..... ,,., >bt&>heo!.ce'l"-1<"'"'1'""1-lr.fel!.•,.,.-of..u..o Bobcat. com/ Dep thCheck

COMPACT EXCAVATOR

MOW BRUSH, GRASS AND MORE WITH THE REACH OF YOUR EXCAVATOR.

Cut down brush, thick weeds, grass and even small trees with the Bobcat11 flail mower. It cuts aggressively and efficiently, wilh a dlrect·d!lw hydraulic motor that PfO~des the optimum balance between torque and rpm. The flall mowers fliple·knlfe ftruls np tluough hard al1d soft moos, vines, grass, am.! brush.

Bob c a t.com /Fia il Mower

A rubber torsion disk absorbs stress during operation, and heavy-duty flanges on both sides of the rotor protect the dnve train. Side safety chains help contain debris. SwHch lhe hydraulic hoses at lhe drive motor to change lhe rotation of lhe reversible ftans, Increasing overan flail life.

,. .. flltlll

,.,. .. "'" 301'1. "'" 40irt

5a.4!."l 60.41'!. 604m

U.;~tD41n Upto4ln Upto41rt

12.2·19.5WO~ 14-22.4gm~ la4·31.7!Jm!

tl-..11"lWrcfKnc.t3 27 " ~-tl);;t:an:; x-= X~PJi-0'1 X-tra-.ge.f'm-cn

Appnwed Ma(blne: lh1 hc,...m:r(E3:2-E85)'

'Ca!l-!'q.t;J~F;:Il:a'·':I!DrsO~'/.VInCC"ma'"dOO:::rm.iSit.acio'*ddc;r;ngcperatO'l.

;,~·"''·""'dd..--t>t·d~~""'"'<r"~:tl ''-' illo~tt!..<e='<"""P""T..frl~/\on--'·of.~•• ~Bobcat.

Reduce the need for conventional compaction equipment and eliminate the need for a person working In the trench. The compact design of the packer wheel allows it to operate in small areas, Increasing the versall!lty of the carrier, No auxiliary hydraulics are required for operation.

3Mlb.(175)Q)

405h(ll129!Ti71)

11h.(279m11)

2 J{)n(762nn)

18(9~\1f:ee)

COMPACT IN THE TRENCHWITHOUT LEAVING THE CAB. The plate compactor a!!acllmen! proVides more powerful compaction force than a hand-operated compactor, saving time on !he fob. You operate it right from !he cab. so there's no need for a \\'Ofker in the lrench. A compact design easly packs material on slopes and in hard-to-reach areas. Shock mounts distribute vibration evenly and keep the a!!acllmen! level for effiden! compacting.

25n

"""' (U(Irrn)

\'f.t;t'l 1B.8iTL

(476rrrn)

~t1ra-rier(ll%j J~l:)_

{1~2),;}

fi~U!:J 2100\"P>11

GET A GRIP OH MATERIAL TO LIFT, MOVE AHO PLACE.

~Bobcat.

Designed for Bobcati'l compact excavators. Easily maneuver the clamp attachment into hard-to-reach areas, allowing you to selectively grab objects. Use with a tren<:hing bocket or three-tine grapple and easily move odd-shaped objects such as tree stumps andCOflcrele.

Fa,;:e"'"-""'~"-~-...... ~~~-""«1:;,--.,_·_,.-, >bll!¢b .. l.bO.,J<=-P..,...,J~>rm..d-lno Bobca I. c om/AIIAIIach

OPEN WIDER, LIFT BIGGER WITH THE PRO CLAMP SYSTEM.

Interchangeable work tools for grabbing or grading. Choose between the standard tool and a grading tool. Both can adjust to different materials or jobs by changing the pin location.

LEARN MORE ABOUT --THE PRO CLAMP SYSTEM.

Walch !he Pro C~mp" system at work

BOBCA T.CO!t/PROCLA MP

Bob c a I. com/AIIAIIa ch

Select !he material clamp for traditional clamp functionality. For greater performance, adjust it to provide a wider, more aggressl\'e bite that wraps around larger obJects and dlfflcult-tohandte materials. The tool can be positioned to al:ow the clamp to follow the bucket farther while dumping.

When p!med illts forward position, the grading tool adds a lip to your bucket for a smooth trench bottom- even when using a toothed bucket. When you p'n the grading tool in its reverse position, it can also speed the cleanup of spo!l piles. With a tooth~ess bucket and a quitk adjustment to the pin position, it also provides clamshell functionality.

Pro0.l'1J~'~~~·aerorca'f\l

O;o;rko]V.~ f89h{Wi:'ID

0.6Jiit(tSmm)

lf.lilWtfT«ttl

Tettl\'{ctl'! 134/n.(Htm:n)

rroo.,---npl'l.tr~~-vrro

Operatr']We'}'i 1S-Ith(eHQ)

11H:I:rzss 063h(16m"!)

Cl..tu.gEt?!Wct!'t 2U51TL{616mm)

ApprondMathtn:/J;o(lG?,:!tcr

"«=':..o;,-!ddr<.<o-~~'~r.,_.,.,,.-~,., >b-s.:bul£<>.~<=-;>:onr~l~•= .. c~-,...

295/a.(ll.H-!1)

1m.(2i4r=)

15.9,,_(4Nrrm)

2201b.(127J..g)

0.6.3h(tlil'ml)

24.251n(6161ni'1)

~Bobcat.

Bullt for penetration, the Iipper attachment effortlessly tears through tough soli and frozen ground. Gussets provide ample ripplrlg power. A heavy-duty shank reinforces the attachment structure for maximum durability and uptime.

S,'n1~ThDJ',s

'W!thX~~Mc>.d

*'Wbf'irt-Ul!k-... -<1

ntt buckets and blades 30 degrees to create slopes, grades and contours. The Hydra-THf"' swing accessory for your compact excavator uses a wrist-like action to angle the excavator bucket or b!ade 30 degrees to the left or right, fora total range of 60 degrees. Reduce repositioring to save Ume creating drainage ditches or digging around culverts, sewer lines and more.

SPECIFICATIONS ,_ ;"" ~ 7

""

~Bobcat. F"'"'<"-'="~"',±,-"'.,-J~'"""""~·>rl:o-.>'"' """'""'~""u"'""""""'""'..fnfOlh~,....

POWERTILT SWING ACCESSORY: 180 DEGREES OF TILTING MOTION Dig under and aromdOOjecls ~ill! 90deglles of motioolo either side.

The PowerTilfll swing accessory tilts the excavator bucket 90 degrees to the left or right~ reducing the need to move the enUre machine. Its wide range ol motion allows It lo <Lg arotlld and tllder objects such as culver Is and sewer lines.lt even delivers lha fte~llffity needed to !lg and shape holes or <Itches, level terrain, backfill benches, or do finish grading.

O;w.b'gl'lettl1 1701U.(77),y) 2il5lh(1291qJ)

t.er-~ 2:5hjfj3:5rrn) 25m{WI!rn)

Wcth 111n.(Z79mn) 11!rt.(179r;;;m)

£0:;-ti>-Srlelll:'..ailm l1lltep. lOOQ;g. o_tp.~tTttQ...-e 2ttofVb.@3000~ l250ft-'!l.@JOC1lro

AJpnrtad MMhlne: lhuEn:zr..t:J

Bobcat. com/All Alta ch

TAKE ON TOUGH TRENCHING JOBS. The Bobcat$) trencher creates trenches fast- even when working In hard, rocky sol!. Teeth and chain options g!ve you more versatility, enabling you to maximize trenching capabilities for soil conditions.

AUGER The large-d•ameter auger moves material from the side of the trenclland limits the spoil !hal falls back into lha trench.

GREASE CYLINDER TENSIONING Adjusting the chain to the proper tension Is fast and easy.

STANDARD CRUMBER Clears soil from the trench and provides a dean, smooth trench bottom.

4-8/NCH TREIJCH\fJG WIDTHS AVAILABLE 1---------1

558!t:lj25Jlqj)

l46i1l{J70amm)

19JI'l.(49Dmm)

AfplovedMaebtnes:V4t7,V519wnV7lJVersaHANOLER~nc

Do bt a I. com /A II Alta ch

tm.n(Cm..b'ettt"-dardAB.F)

""'' Gr~l;)'nder

U<.:itPe Gr~el;)'r"Cc "-O;aatr"9Weu~(wtro~ttoe:n) 570111.!259~) 5951i(270~)

Twt~>-gWG'&sh<frJ:J.e 4-81n,{1fi2·:D3mc"!l) Hln.fl<!2·203m) 13-20g:m(49·76Urrrn)

3000ps!(ID68.4kl'a)

P.cwfb-'[;.e -'l.alO;:ml!r,g'f'ftB.re

lh"r.l!llt:f;(,i'l

~~I.e-~

lh]lle:'pttl@SOI!-eg.~

fn.'lleWlim

kfftiC'e>-a-a:

13-20g:;m(49·76Lim'\)

JWJps;i(zc.se4kP;l)

Ell2rn(1732mm) 81.Sirt(107tlm)

39.4in..fl<:{)t)nrn) 52.5n.(1334m)

24h1.(610tnm) 381:\(914m-n)

!ID.6h(7771Jl")j 30.-611.{177m)

1l2-155l1t(351-401trm) 1l8·15.Birt(:l51-401m)

~Bobcat.

COMPACilOAOER

MORE MATERIAL. FEWER PASSES.

ZERO EFFORT.

Clean up with your Bobcat0 loader. Use the hydraulically driven angle broom attachment for sweeping driveways, sidewalks, parking lots, loading docks and warehouses, or for turf cleaning, dethatching and more. It's particularly useful for quick snow removal without damaging pavement surfaces.

H:t ""'""'"'-'"~ :....L-.... ..-.;~t.:H-.J<·b-.. • ;n >b:llo.tut.=«V<<""i'""7-Wo.'t<mu-d·~•• B o bcat.com/ AngleBroom

EASY MAtNTENANCE Quick-change rotor design makes brist!e replacement easy. Simply remove t\vo bolls and the enUre rotor is released.

ANGLE CONTROL The 48-inch broom has a manual angle of up to 30 degrees left or right. The 68- and 84-inch brooms have a h)ffilulk: ang'e of up to 25 degrees left or right.

FLUSH SWEEPING Get as close as you want. Improved sweeping effldency allows for flush sweeping to a curb or wall on the right side.

PATENTED SPRING DESIGN An exclusive spring design provides optimum dm•m pressure. f;>t.,:.J:..h.llrn B-'rrl1.-.:>:1:l

Bob c a I. com /Ang leB room

TOUGH BOBCAT BRISTLES Job-proven and easy to replace, the polypropylene bristle wafers provide excellent durability and flick material away for superior cleaning. The waved design of the angle broom bristles clears a cleaner patll and sweeps more snow or debris In a single pass. For hea,ry-d.Ity clean'ng actioo on difflcUtjobs, easy-tcHnslall steel bristles are available.

0Na:!Wct'l 5-19i"-l1394mn) S't.U,WttiS7a~'t ~Sm.(ll:<lllml)

Sti*~WctiFU'JA.riG'~ ~l.51!1.{11J5511'11l)

DegudJI.trj.-t.

"'""· {n]-.'1tt!S't)

O;:e'llt:n:l'i'•'tg.'1 :zaJt!L(I1n2)

8-o:mA,-g;,g ,_

o~:acn """ O.Tli!Sr.t<m lfJ~~;IIttt

O':fn~:;wR.<d..-ct.tn

P.c.yft.Tu;~ 6·13gom{30-49U;rm)

atcmeraeoa.~w 21.h"'1.[5~1Tm)

AIIGLE LEFT OR RIGHT l--------1

FLO\'/ RAIJGE

7B6c(2022mm) 9DJ ~1.(24-.\Sm)

6a:n('!7Z7m) 84h{2134nrn)

6Ji;,.{TEOOm;;) nli1.(1956nm)

""" 256J;<.

EEOih.{lWf.g) 94-ll.J.(m~,.l

ltJii"at':>:O,~rt!u tf)¢a:.rltC)1;,1.er

Foal ""' ~lc'-'cb tf~!.!a.r (l.ro;tiJ,~ Ora:tOr>re

B-24~;{3!J-91Umn-) t5-2a@ll{57-100Umn.)

32n{612n:m) 32h{S12rnt) Br<!t'.;~I/CJ,'~ l'ep'~'ep:{J?fWJ'e-<esectm;{ol.:ilsattma,.a'<b'e)

l~dl!ll:;teS!dGU 23Zg·Z..]2St!a>;f-t 36ZI;J·Z<112strag-'t t.il9-laJ2Slra;;-'1t

Ap~ron~ Mlet!ns:S<.d·SieerlcOCer,C<m;KictTI'll«Lro:!~.A-1·'1'1tftl~rlro::'S", 'lmTrd:X~. Tc<!c.ll~ Ut tjWo'~ '•'ach>.e, Ver<..o.HA'IElLER~ TIC

CO~PACT LOADER

DIG HOLES FASTER AND DEEPER. Dig deeper and faster- even in hard, rocky soilwith the Bobcat" auger attachment.

MORE DEPTH A drive unit that follows the bit Into the hole provides up to 12 inches of extra dig depth.

DIRECT OR PLANETARY DRIVE law-maintenance direct-drive models give you excellent torque and rpm for reliable digging performance In many soil conditions.

Planetary-drive augers provide extra power and torque for anchor appllcations and extreme ground conditions, lncfudlng rock, shale, clay or frost.

VERSATILITY WITH THE BOB· TACH SYSTEM The Bob-Tach0 mounting system allows you to use your auger on multiple caniers.

BITS AND TEETH

KHUCKLE·JOIHT DESIGH

Dig vertical ho~es on uneven terrain.

Match the tool to the job; 6· to 48-lnch diameters available:

LICHT DUTY STAIIDARO DUTY HEAVY DUTY ROCK DUlY

~-~ ... ·_ ... :--~· '---,'-. ;_!-''Y:Jl c, ~ ... {}! '" :1'~,.; ~ •fi

'• 1.1 ~ Bobcat. ~'1:\'"'.:;:;.;;;:;;~t.::l:'.;.:::z;,~ Bo heal, com/Auger

-- RECOMMEUDEDUSES

lloCS10 "''' ""' A.~w'!nr~!ab~"ieJSJdwrgor 5Sm. lootew:s-Upto2Ht.da~llb. - ""' ""' 62a

""'"' """

Hard,tnu!;h,B'I-c.:tjCWrgt-rt:_,gtl

JCcrJOH "" "'" ~.rdpa.1,fro:tcta:;.phz<ll0oalforlxi;1l "" ~ZT'IftUtrlla--dha-dnwll;l;:Vt'21.:ons..

'"'"' "" ""' n~c 35l5llAi

'0 ~q~g ~iptil wtttn,t£del'l£tn

Hous:no

""" ll.4h.j214rn'it) 1tullrtj~!li!Tll} 10.Sin(26SW1)

wn' 9.2111.(Z3Jmn) 1021n.(2EOmm) 1Q.2i;t.(2€0mrn) C!5iiii"-reV>~ 'lllh.(154nm) 12n(:!il5mmJ 12in.(S05mm) dOrr.-elrA 1'/e{jii 150!b.(S61<.g) 220!b.(100~1 ZlO!b.(T041<.g)

llrM!Sr.Um """ ""' -RPM' ltiiSt>:n(Wl/!l';ie"t) """' @12QP'11(4SUmh) 7Zrpm 57rp,TI @17g:n(e4Umn.} 102~pm """' 41tp'11 @21Q?11(7BL!mn.) 9Srprn """' d>2:3m:r;{a7lln.:t) "'"" """' @30Wll(114Urn) "'"m CJ7mn!i40l.lm) OOrpn

TOI'ljl.~·

@2000~(!9n81oh.) 1C211l-t:l.f1SZHkn} 13Wil·ll.(17ElN'l!) 2521Jil-!a(341711m} @2400pti(16547kPa) 12251l·ll.{1Wlthl) 1560fl-::l.\2115Wn) 3Q241l-D.(~1COII'll)

02700p.l(l&:i1!11:f'a) 1378fl.!b_(lf6Strn) t7SSil-hj2379Nm) 340'2fl..a(42t31hj 03000Vo~(206S41>J'a) 15nfl-h.{20ntl-n) tssott-'l!.t26441tnl .naort-lnt5125tl1tJ @J:300~(1275JI<h) 2415ft..fu.(ZOOth) 415Bft-lh[563alhl)

@3500p-::~(24132io.Pa) 2275ft.-:!J.{J034/J'11) 44101t-lb.(5979tlll)

&IS= llgii!My" 6Jil..,9h.,121T1.,151Tl.,18h..,24n.,30in..,36ln. - 61J.,9F'I.12~l)h1,Ulri~24Jn.,30h.,J6ln.

Treef'.a-t·.g 1Bici~2~n.,3:01Tl.,Uiln.

l"a'/tfl'-~11 6h.9h.l>cl6' '"'"'

61ll,9M., 12rn..,~~~~2

~1T1.,24h..,3011t '\':!l!.la!are~,l!lMfair--d.li:1M%¢~.q.

•'Qr>'.q~bbrna~II3tuvdJ1ik:l:Qit1TtrJlO!IX!ca:dtTs.

COMPACT lDADEfl

58-72 INCH OIGGIIIG DEPTH WITHOUT EXTEtJSIOii

6-48 INCH DIAMETER BITS AVAILADLE

PLANEfARY MODEL MODEL AUGER 35PH SOPH

Ht:!utrg

'""" tt4m(1Wr,-,n) 1!.4i1.!200m)

""' 11.61rt(£9ln1M) 1t611t(29Jm;7!) CU:-..rm~ 12Jr!.{JOSID'll} ttn{lCSJTFTJ) d!Jnwi.J;;t We'¢;t 297!b.(134~1 299!b.(135~)

Om--eS)!!em - _, RPM'

@lB~(Dl.J3Urt."'l) """' "'"" @22grn(!IJ27l.lm''l.) 5SI']T.l """' @26g;m{M41lftm:t) """' """' @30grn(113.55llmn.) 77rp71 61rp'1l 032g;m(121.12Un..,_j """' """' @34~m(128..69Umn) ""' """' 0~@1l!I3625Umn) """' """ @3aCPm(14l83UIIt11.) """' """' ,_.. @2CQO~(t97e8~) 2JS71l-ttl.('32371h1) 30231l·'b.{4t001tn) 024C0p.gj16547»'a) Zl641l-b (JM41h) l62'81l-ill.(49201i"'l) @2600psi(17Q261<J'a) 310.3fl·:tl.{4100fh) 39J11Hl.{5330N"l) O:l100psj22C631d'a) 3al91t-lb.(51791tnj 30231t-h(4100ftnj @3500pri{24132io.Pa) 41771l-!b.(58l4/J""lj 52911t-ib.{7175tlr!)

eJSae

KG,)'D~tl 8n,12ln.,1Stn.,241n.,301Tl.,

:lah..48111.

""" Sm,t2m..,l&:n..24m..30n 'VA.:~::r~ c.dcub~J. lh<!Jetlal :;t 100% eff®<C)I..

Appri71H Uu~hu:s..u-Sta:rl..ta!!er, COi'!\.'Ud.Trad<.lroder, A.!.VIt-rel SWL.mcier, 1/n Eli:a<'<!tlll, !InTra:~ LJ:~er, T11t:-lca!~ Ut' t-JWurkllach~e, ~I!::!HA'IDlffi~TIC

"'""""'""""''dci.r-<~o·n~~"'",..."'"' lb-ll.o~ .. !=""<""'P"">'...,!Vu=o-d-~u

COMPACT LOADER

NEAR-PERFECT GRADING TO EARN AND SAVE THOUSANDS. If you're below grade, the extra concrete it takes to finish the job can cost vmt thousands of dollars. Bobcat offers a more profitable way to grade. Our laser-guided, sonic/slope sensor and 3D grading systems provide 0.25-inch accuracy for less staking, checking and rework, plus lower operating costs and improved material usage. These systems can potentially pay for themselves in just one job. Easy to use and install, automated grading systems allow even inexperienced operators to achieve near-perfect accuracy.

CHOOSE FROM THREE DIFFERENT GRADE CONTROL SYSTEMS

FOR DIGITAL DESIGN EXECUTION AHO 3D CONTROL: 3D SYSTEM The plug-and-play 30 grade control system for Bobcat11 loaders allows contractors to use digital designs and 3D machine control to qulckly and accurately sculpt the land. It is approved for use with 96- and 108-!nch heavy-duty attachments. The 3D system works off elevation coordinates set up around the jobsite, giving operators the ability to grade valleys, ditches, contours, sports fields, roads and highways, and residential properties.

SEE HOW IT WORKS: BOBCAT.COM/30

Bobcat. com/AliA! I a ell

FOR HEW CONSTRUCTION AND DPEH AREAS: LASER·GUIDED SYSTEM On new construction sites and other open areas, this system gives you unrivaled accuracy and material savings. It works with both the grader (models 84, 96 and 108) and box blade attachments. Both attachments produce great results on flat plane and single-slope applications (depending on the transmitter model). The box blade must travel up and down the slope while the grader can travel in any direction. The grader attachment will provide the best result for dual-slope surfaces.

• Automatically control grader or box blade

• Achieve accurate flnlSh gra<ling and Improve operator productivity

• Excellent for coocrete flatvmrk

• Includes a manual override function

• Quick mounting; fast setup and removal

SEE HOW IT WORKS: BO BCAT.CO M/LASERSYSTEM

WHEH FOLLOWING A STRIHGLIHE OR GRADING WITH OBSTACLES: SOHIC TRACER/SLOPE SYSTEM The sonic tracer/slope system provides maximum efficiency and accuracy on more complicated jobsites with columns or other obstacles that would block a laser transmitter. Available for 96- and 108-lnch grader models, this system follows the terrain below the sonic tracer {which Is mounted on one side of the grader) and maintains a consistent, predetermined cross-slope. It's a great solution for parnlng garages and bicycle or golf-cart paths. When the sonic tracer Is disabled, the system can automatically control the cross-slope, and the operator can manually control the side of the blade on which the sonic tracer Is mounted. This Is useful when making first passes to provide a smooth surface for the sonic tracer to follow on the next pass.

SEE HOW IT WORKS: DOBCAT.COM/SOHIC

Bobca I. com /AIIAIIa ell

LASER AND SOHIC SYSTEM DELUXE IHSTRUMEHT PAHEL Used as a control box to operate either the sonic/slope-tracer or laser-guided grading system, the optional deluxe instrument panel allows the osmalor to set the parameters of the grading system, receive real-time Information, make adjustments and even switch to manual operation.

COMPACT LOAOER

TURN YOUR BOBCAT LOADER INTO A

POWERFUL EXCAVATOR.

With a range of backhoe models for most Bobcat0 loaders, this attachment is powerful enough to handle full-time excavating jobs. Increase versatility even further with select X-Change" attachments.

OperargWfc<;~l1(trtta:<.Jtb.~)

[t'llf:mim~

SbYW'TJ;:e

Sb~Wm~'<aiT~rt

Sb!lmtl'/ct'l,P"odsF!amo.~

stt!BwSVta:~\~41

G.'U..ff'dC'ea'a~re

Dro.'"lJDQn-1/.n.

Dw::gOqltl-2/lP:ltllctlmn

'""'"" B~&.a."ourtngSJS'.em

/l:ciJZ;Jf!Tren::l'ing

"--I'T-

Alil'a!:.!eGrEi:t:rgB:.cWW1Xl {Cas. Ill

R:'d-Ot:.m 41.8in(1C€2mm)

36IT1.{914mm)

&Un(1633rn:mi 2t1.{51mm)

7a2h{l935mrn)

nsn(t84trmn)

33.9n{i'28rn)

Mm..(2235mrn)

"""" P.l-Qil

9m,12rn (2'29J!Ii!.3il5nn)

"""' S6~1.(142.2mm}

551n(13!17mrn)

424n£!(I17mm)

7.1Srn.(19Jm11) S5Jm.(?.415mn) 95-Sin.(Z42Brrn)

79.4m.{W17n:n) 12l61n.(3139mn)

te-eo:g_ x-cm~~~fii2m

13n.,16m..20ln.,24h (330l1111,4CS.!n'":l, 500mm,610nt"'l)

2012ltl(913~

"""' FO:d-Oc..,n 541!n (lJ74nm) 7£1Jn(l7B61'N1")

J24n(1077nmJ l3113>n.(~10mm)

6..8n(tnmm) 4.11n{104m)

1156i:q296211m) t35..7n{344aml}

118.111l.{:lOCOm) 1348~n.(3414rn'11)

91m(Z31lf'ln)) WJ>r;~.(147!lm'1lt

145.3rn.(JM1m) 166in.{4216m""11)

"""" "'"" X<hll>~,ga5"jS!sn X-Ctn-CflS'J1!em

121il,llilrl.,1Sh.,20n, 12irl,15m.18in..,21ln. 24h,30m,36m :Z4m,3!.1t~~36'n..

jJ051l'm,tetinn,l.571ml,S{.(Imn. {305r::m.?rerrn.437l'm'1,!mllm!l, 6Wrnrn,762m,9Umm) 61Dm"1,752mm,9U!W!lt

39rn.(':l91mi 39rn.(991rm!)

Robe a l.co m/B ac k hoe

BOB·TACH BACKHOE Vl1th the cO£Wen!ence of the Bob-Tachs mounting system, the backhoe mounts directly to the loader- no mounting kit or stabilizers requlred. The dipper swings left or rlght up to 48 degrees.

O;satrgWev·'t(wti';'J.tb...!"MtJ 7501b.!J-401<91

S'Wi]An;le 48rleg..Jel!mrq4

H<¢1

"'""" -lJiiftrteR..'i:llrl 8.ot...:;1X..C~S}Eiin

A.-~~Wdhs

771,.(19S7m'T1)

SOm(1vtlml

ll8hl..{452fiTI1)

72h!IS-Y.lrmlj 77n(19S7mm)

4Jl78tlf

"'"""' 13111.(330wn)

~:~= Appron~ M!ctku: SJ...Id-~r t.£g-er, C!:m~Tr;;o:~L!l~e

Ill ' ·~ , B A LE F 0 R K

LIFT, HAUL AND STACK HAY BALES EASILY AND EFFICIENTLY.

Bo be a I, com /A II Allach

Two sma!!-diameter forks, mounted on the frame, penetrate and move round, square or uneven bales with ease, saving time and allovling you more hours to tend to fivestock.

40.8 INCH FORf: LEfJGTH

• Two small-diameter tines penetrate the materiaJ

• Mounts to standard or heavy-duty pal~! fork attachment frame

:;;,>t,;;~~:J:;.;;,~:;;;.:.:cx~;" ~ Bobcat.

GRADE WITH THE ACCURACY AND DURABILITY OF THE BOX BLADE.

Use the Bobcal 8 box blade lo do lhe job fasl while reducing costly material waste.

SEE THE DUX BLADE AT WORK: B ODCAT.COM/B OX DLADEVI OEO

OPERATE MANUALLY FOR ROUGH GRADING AHD LANDSCAPING. On its own, the box blade excels at rough grading and landscaping, fllllng In low spots, or carrying and spreading materials with its box end wings to bring a surface close to grade. The front bo:ster on the box blade can be raised or lowered to control the height of the cutting edge. lower the cutting edge to cut ami raise It to dump the material.

USE LASER CONTROL FOR SUPERIOR ACCURACY. With the automatic laser control system, the laser receiver follows a plane of light emitted by the transmitter to control the height of the bolster and cutting edge, achieving ±0.25-lnch accuracy. You can quickly change from automatic to manual mode by clicking a button on the cootrol hand~es. Pair it with the deluxe instrument panel for inctemenVdecrement control, and to receive roaHime information in the cab, such as blade position relative to target and distance above or below grade.

Bobcat. com/Box B Ia de

CD

~

FOAM·FILLED TIRES Tires are filled with foam to el!mlnate flats. They also provide excellent flotation to keep the box blade moving smoothly over the work area.

OSCILLATIHO BOLSTER locreases f!rst-pass accuracy tJy minimizing the effect of uneven ground.

O,o:r.:."T>J\'.1:9¢ KDb!~45"l) lCQDLJ (~fi.H'1)

HJ)t(Al Jlh(BH~"''/ 3lh[is1J.nn} tr>'1-a.tbsorp..,\;;J

l6"1}:!1(8) 6~3h (16J3!fmj 6-.IJh (16lJm.T~

O,<NIViW1tCt 855iq2173mn) &55h{2t73~n}

I.',.Afu>:a"'.l\\'•ShtO) !Hht2mmrn) a-tht2mJTm)

&o::t.;rWCiltf) 43.3iql2ZlJTrn) 4S3h{f2Z7mn) I,Udxn"'..O.ttn]h:l}l(rt.".•:r;;it-,\c) OSirl dll.1 (13mmx151mm) 05inx!il1(HJTmx\Slm.n)

~\:oknr:aqr.!Till.aD:i" ±02Sht6~

FOR MORE IHFORMATIOH:

Check out Bobcat3 autvmatic grade central an page 22.

INSTALL CABLE AND FLEXIBLE PIPE

WITHOUT TEARING UP PAVED AREAS. The boring unit attachment bores horizontaJty to accommodate pipe or cable up to 4 inches In diameter. After boring, the attachment works to pull the pipe or cable through the hole. Mount the drive head from the front of the loader ln three positions: on the center, right or left side. This al!ows the attachment to be (X}Sltioned Orec:Uy next to buildings and obstades, exactly where boring operation Is desired.

• Install electrical, telephone and television cables

• lnstalllnlgation Hnes and flexible water pipes for sprinkler systems

• Bore up to 2 feet deep and up to 30 feet horizontally

3Q FOOT IIORIZ011TAL DOfllriG DtSTAriCE f---------1

1\'c:.j"t(:.lhutut)

Wd!t lkift

lfi"l.tl 'Al.l fb:r.Jmrro:ntrl Bt:<l":q()r.t-.1""-~

lJOhjSg•ql

:.'1Jh(9"f..lm.··J 175h(H5rrur1) 266h:00')1T1m)

30fttgm)

Ap~r~n4 Machl~u:S~·JSt·-"-f l.ro.kf. l.':iTra."{tn;v.B

~ t '~w ~ ~, I" " ~ << ~. -

t28 BREAKER, HYDRAULIC '( ~~~ .,, . < _', ··I BREAKER, HYDRAULIC ~9

ALL IT TAKES IS THE HYDRAULIC BREAKER TO DEMOLISH THE JOB FAST.

• Most models can quickly mount to a loader or excavator

• Virtually maintenance-free

150 1, 000 FT. -LB. lfolP1\CT EflERGV CLASS

BREAK CONCRETE

ASTER AND CUT THROUGH ROCKS EASIER.

OPTIONS AND ACCESSORIES

BREAKER BITS: A wide variety of breaker tools ensures you can always use the right tool for

the task at hand.

Bo beat. com/Breaker

CONSTANT POWER. CONSISTENT PRODUCTIVITY. Most other manufacturers' breakers fire the piston with compressed nitrogen, which Is subject to leaks during use that decrease performance. Bobcat& breakers use hydraulic all flow to fila tha breaker wh!le nitrogen assists the piston's return to the ftrtng position. H~'drauuc all cools the piston and breaker walls, preventing wear and extending the life of your attachment. This design delivers peak power while requiring less recharging and virtually no energy-chamber mantenance.

CYLINDRICAL BREAKER CRADLE This design Improves job access and accuracy in confined areas.

EASY MOUNTING AND CARRIER VERSATILITY Oulckly mount and remove, or switch from a loader to excavator and back, with the Bob-Tach~'> and X- Change"' attachment mounting systems.

LOW-MAINTENANCE DESIGN The breaker has only 12 man service parts, meaning fevrer breakda.vns can occur, and If they do, the breaker ls easy to repalr, nghtlnthefleld.

M!I,I@MMI!,!.!.!.M f'efurmmc~

IT>;>rlEo-e:ry;IJ;;e;. 1~fthJZ!XlJJ ~OO!t-li !4().7 JJ C•J,1_AT,.JEna'gflb~J H31t-lli194J) 2071t-Ll(21llJ)

fb'.z;F<:<Lhl!k !U.:l@\Jg'"!ITI 13101017~

HnP..::q.:rcm7s 7-13opm B-17g:rn (2JH9Urrl:l) r30-(]-!Urrill)

b~ultr;;a<nf\.""'lt:::tn..~U)uifltmclcti

f\(o.mTt;rd-_;jVf._i!',!;-J.Jll"•:c,n.=:; 2-!ill 41Dl·1 (50100iU•) (lC•JZSOmor.)

[\/l'<:E:h.d~l'.:ttlo>IJ

t.cn-Pd.n\n:_«.J 14\'li:rnr 412\1i"ft,r t083.1m'trr) tl192m'Jt.r)

£k-fl7troJ 1-3\d-'ltir (0823rr/!NJ

.fl41l1Z..'4~ T45b.(334·:g

632Ut28H<J) 7tUllt3:57"-')

131n (3JDmn) Ull(:liDifln)

73tnl1Biirm) 84~'1(214mrJ

4541•ll1152mn) 4541lt1152mT.)

a)51-Ji521JPUo] 205iq520rrm)

4Hin(1t3iln-111'•) 52-9ill(13-l-lrrm)

kdl>u-:oc'£1' 22h'l_\:551!!:1ll) 21il1:!i51TlTJ

Bo be a t.co m/Bre aker

COMPACT LOADER

AUTOMATIC POWER REGULATION Automatic pressure regulation further ensures consistent perfonnance, regardless of changes In outdoor temperature and across multiple carrier types. It also limits excessive pressure at the time of start-up, preventing wear and potential downtime.

INCLUDED GO/NO·GO GAUGE Quickly check the gauge to see whether It's time to replace crttical components. There's no measuring required.

SINGLE LOWER BUSHING All modeB have just one iov.'!lf bust;ng that B easy to replace.

5001t-tl\u50J) 150fl.-b(Hl1GJ} 1to3ftt:q'135il.f/

2Blft-UJ(1n.2J) 3B41t-l!(!iOlJ) 700ft"il(950J)

1~:'4.l&:~Zl9Jin 12.00@:26!Pfl tZ::<tl.@l329'1m ilHI@-33\]lm

12-llg:;rn 15-26gir11 2{)-33~.,..

(45-CiiU~r:n) (57-00L/rrh) (76-125Um'il)

B14ln_ 1a1sn 1l20in jl50350rn:n) (2SD455rrJT•) t3055DOrnm)

515jd'ltf_ G15yd-'itor 018)'-i'ltr (3B115m'ft;r) {4li115m'ft~) t611JBm',t1)

2ti)dllt3 3·SI¢'<tf i15-41lm'ffr) !d-tlhl/n)

87IiiJfd.'7liD tDS!JbJ476~ llf;1iq:SZH1~)

10fJ21J (~90•1!) 11301J(513<g)

1Hq:iSGmn) lfiln(-IC>ilmn) 1Hl(4.12oM1)

81lln~12Jmm} fl.Sifl(241mrq !lllil1\:2-44::nmj

454hl(1152rr;'Tl) 4S4h(1152m.n) 4541nt1152mn) 4541,l(l15211T11)

2tJ5n(520mn) 2J5ht52ilJml} aJ.!ll1(52ilml>} al5lrq520Jm.j

55Sin(1421rm,) Cfl.3h(1530m:n) C491n (1fi47rm) m71n(l745mn)

2Bil{1211Tm) :l•nt77mu) J41~ !lt'irm·l 31Hl\!ll511TI'1

GETA

SMOOTH CUT ON UNEVEN TERRAIN.

The Brushcaf' rotary cutter is available with culling widths from 66 to 80 inches and a culling height of 3 inches. The rotary cutter easily cuts overgrown grass, brush and small trees, transforming undergrowth into mulch. On a slope, the Brush cat cutler moves parallel with the ground. There's no need to double back for an even cut.

~Bobcat. b,.;~~'"""'J<~..L-,J,-.,Jtr"""-..t"<l;r-£'"' ,bt l«~<>U...~o....,.;.lnJ·n!~'""'"_._~,..,

A MORE MANEUVERABLE SHORT·DECK DESIGN The short deck reduces weight, increases visibility and allows tighter tum'ng.lt also leaves more room on the tral!er for hau1ing.

SELF-ADJUSTING, PIVOTING FLOTATION LlftKAGE Increases first-pass accuracy by minimizing the effect of uneven grotmd.

DUAL OFFSET MOTORS Dual direct-drive motors provide ample power in a small package for tough brush-removal jobs.

OFFSET BLADE Offset b!ade with a 1.5-inch blade overlap provides a wide, lHliform cut

DIRECT DRIVE Efficiently transfers hydraullc PO'Ner straight through to the blades. High-flaw models increase available torque for even better performance in thick brush.

FRONT DISK Allows the attachment to traverse uneven terrain with minimal skips and gouging- and with less operator input.

PATEHTED BLADE SHUTOFF Stops blade rotation when the rear ro!Jer Is raJsed.

REAR TAPERED ROLLER Shields debris from flying out the back of the cutting det:k and adds maneuverability for gouge-free turns. It also prote<:ls when driving near air-conditioning units, windows or people.

Bo beat. com/ Brushcal

Ct;;;r·~s ~~~th SAEJ2J2 ;;."dASAES463 ..-t .. !'lmlrcta.ry~rsb-l!a."lls..

OPTIOIIS AIIO ACCESSORIES OFFSET BlADE KIT: Provides 4-inchcuttingheighl.

MOTOR COVERS: Shield motors from debris.

FRONT ROLLERS: Allow the attachment to traverse uneven terrain with minimal skips and reduce operator fatigue.

ll:>Wftf,r,n tl.U<JTtfm,,) t!l2J61Ltrb~ (55ij){r</iriL)

6Gh.(876mro)

3i1(76!Tll·}

ll~ft!n"ltl 9'322fthrill tl47<JT.'ITill) (302 ~"'/orin)

1fC.6.1ftfr,tit 11!97tf,rh f.52<1ll'mh} t52~ <:<~l'eiil)

E6in.j1676mm) 72h[t&231T11) 3ht76rr;n) 3hlillrrm)

703in.[1ToJ3a,n) 76J\l[l9:JJITF•)

CUT AWAY BRUSH AND CLEAR SMALL TREES. Clear the way with the Bobcat:;) brush saw attachment. Thls heavy-duty attachment saws off sma!llrees flush with the ground or even a little below the surface. Position the boom manually In up to three positions- center, or 12 degrees !eft or right- to operate with excellent visibility of the cutting, clearing action.

O~d:nJW~OJ;:t

\Yrtn -1\c:-qt

L1:il",\',~•'dl\1~:>:l1

f,,_JTL>J'lil<"tll [\E<T<':l\t~ (ri.ft1tHt1

Y.>Jh(<:6-9•.gl .fBh!lll!l>nn)

/l.Shi2159non)

2!1Sn(7~!ITf<)

ZJ5htn~non)

22:6ftlrrh. (99~m!ch)G2~g-un

15

IPtt'-litflw 1524Qil11[5791llitil) ·~ Sp-:d:;t ,l.p;::,[,:J:.':t•n 1:~ 1nrt Y.ll'l';:':,!tdc,l !lb' ~·03 r.tt:llro:<""'t<~l!).)to'1Ef!SJ,"'1mairroi:

A~~~~ta·i Na~hhu:S•.\.J StMLc.:&r, C•.m;!:!.iTr,;_'~l.nJ,j,{ M-\',tdS~""rlJ:<lli

"<>=~·"""·: ... od..r.,,-o~,.r-........ ""-·""' ""'kl>ut='<='l'>r7-h!o./'l•mu·*"'' ~Bobcat

THE

BEST-BUILT BUCKET IN THE INDUSTRY. Don't accept Imitations. Ask for Bobcat" buckets. They're built tougher to work harder.

FOR L/GHTER-DlflY JOBS: GENERAL PURPOSE AND DIRT BUCKETS For dally use with smaller Bobcat loaders or occasional usa on some of our larger machines, you can't beat the versatility of Bobcat general purpose and dirt buckets. Tlle skid-bar design provides wear protection to the bucket bottom, backs up the cutting edge and adds strength to the bottom of the bucket. A flat back on the IJUcket exterior provides a secure mount for the Bob-Tach9 system. A round back Inside the bucket enhan<es loading and cleanout A replacea~e 0.5- by 4-lnch high-carbon steel cutting edge provides a long bucket life.

BUCKET, GENERAL PURPOSE The standard bucket forToolcar· machines and a good choice for low-hour users on some larger loaders. General purpose buckets are Ideal tor light-duly grading and leveling applications as wen as material handfing.

• Similar to d1rt bucket with a longer bottom

• Perfectfor light-duly grad•ng, levermg and material handflng

• Excellent cutting edge visibility

• Good bucket breakout force

~Bobcat. R>~cz<rr•~..h<-"'~-d~oili--'•d,.-~·"' '"" ll.obut.<o,]<""'l'-t..Wo!U=o-of.mo

BUCKET, DIRT The standard bucket on smaller Bobcat loaders.

• S1m1/artogeneralpurpose 0 bucke~ but 1~\h a shorter bottom and low back •

• Fair cutting edge visibility • . .. • Excellent bucket breakout force

OPTIONS AND ACCESSORIES BOLT·Ofl TEETH: Help chew through tough d;gg·ng cood1tions.

BOLT·ON CUTTING EDGE: Provides longer life to your bucket

FOR HEAVY-DUTY JOBS: C 0 N S T R U C T1 0 N /INDUSTRIAL AND LOW-PROFILE BUCKETS With more dl.Jrability for your toughest jobs, nothing provides longer wear In extreme applications.

BUCKET, COHSTRUCTIOH/IHDUSTRIAL (C/1) The standard for performance

andstrength Q • Htghest breakout forces

• Good cutting edge V1S1b1hty

• Shorter bottom and Jess capacity ~ ., • •

BUCKET, LOW·PROFILE This Is the most popular Bobcat bucket. Low-profile buckets are Ideal for grading, leveling, carrying, loading and other material hendtog.

• Good breakout force

• Excellent cutting edge vlslbmty

• Slmflar to the C/1 bucket, butwlthsl!ghtiylonger bottom for better visibility and Increased capacity

BUCKET, HEAVY·/SEVERE·OUTY CONSTRUCTION/INDUSTRIAL (C/1) Designed for larger Bobcat loaders and compact track ~aders. These buckets are buill even stronger ll1an Gil and lovl·profile ,buckets.

• 0.75 x a Inch (HD) or 1 x 8 Inch (SO) high-carbon steel cutting edge

• More capacity than Cfl or !mv·profilebuckets

• Double-waned top crossmember

• Stronger mounting frame

• Higher back and longer bottom

• Thicker and tatter side cutting edges

Bo beat. com/Bucket

SPECIALTY BUCKETS:

• Move large volumes of granular material

BUCKET, SHOW AND LIGHT MATERIAL • Idea! for handling large, low-density materials

• Large-capacity buckets with a high-back design

• Sizes range from 68 to 100 inches wide

BUCKET, ROCK • Skeletal deslgncot!ects

rocks wh!le leavlfVJ son behtnd

• Heavy-duty models ranging from 62 to 82lnches wide

Most Bobcat" buckets can be equipped with grapple attachments for hendlog loose or han!-lo-hande

materials. Additional accessories are available.

CHECK OUT BOBCAT BUCKET ACCESSORIES OH PAGE 34.

""""""~"""id..-.,,,J~;.,.k-"''"1>--""'::n >'-"''~~o>tuL«>""•"""'i'"'J..b!~of."'t ~Bobcat.

CUSTO IZE YOUR BUCKETS. WELD·DH GUTTING EDGE Provides longer life to your bucket

WELD·DH SHANKS Offer strength and durability.

OSCILLATE ATTACHMENTS 15 DEGREES RIGHT OR LEFT. Get more work out of Bobcat;<) attachments with an effective 15~degree twist to the right or left. The Tilt-Tatch .... unit connects as an interface between the carrier and non-hydraulic attachments and Is ctlntrolled d recUy from the operators seal.

• Load or unload pallets of materials such as !umber, shingles, siding, fencing and block

• CUt a level path on a hillside

• Keep a load level on uneven terrain

~Bobcat. f;:.«;...:;',.,.·o-•=-J.c--7·.-.d~,.:>;--..-<•b-.<':>"> >b<B,:,I>uUc...,."""f'rry.J=I311t~n•

A~prund )btMre~: S•"-1 S•i.;rU"I.!i-r, 0:1fT1J:'l.1 T~-~ l!.•"':H, ToA3~ ll<itt \ 1,~\f~ l.tJJ;,._,

Bo beat. c om/AIIAIIach

REPLACEMENT CUTTING EDGES WILL HELP YOU KEEP YOUR

COMPETITIVE EDGE.

GRAPPLE ATTACHMEIITS POLYURETHANE CUTTIIIG EDGE

Bobcal.com/AIIAIIach ------

REPLACEMEflT TEE Til

~Bobcat.

?! 4 ~-3~ ~' s II: liP j -

iJn ~ c" 1 p pEn , r ~~ .. · · .~~ . • 8 u c K E T. c oM 8 1 ru AT 1 o ru ~3J COMPACT LOADER

DON'T HAUL BRANCHES AND OTHER DEBRIS TO THE ROAD-

CHIP IT ON THE SPOT.

Safely start and stop the machine and chipper from outside the loader.

Be prepared for a ~g cleanup. lllls chipper goes where the trees fall and the brnnches are down. Using a powerful disk chipping action, this attachment continuously ch;ps materials -trees, limbs, branches, saplings and more -up to Slnches In diameter. It's Ideal for tree removal, pruning services, municipalities, parks and recreation, rentals, and persooal property maintenance.

1145b(5\91<lj)

U;ltl3J1!1ll!m'iJ $K<>±::I<!'~ft!

ZJ5lrl(S!17mn)

921Ji23371W4

1GG011l(75JI<l]t

t\lloJ5lrl.itl7mr) ~!l't:t'~

2541n(645tn-;)

9J3111231'0riDl) 921rq234mm)

4~Jt!!;:.Jrif)";:{J:b:}:s

Flli!fmmh'11rii'\1i!WodbJ!b h':f:dh<nfmntrtnghl~ufkJJd::r

r.~~.<iil!lo9: ~Y.;;Jd<.9-

~:·" : 8 u c K E T, c 0 M 8 I N AT I 0 N : I~ '' ;

USE AS A BUCKET, AS A GRAPPLE, OR FOR DOZING, LEVELING AND SPREADING MATERIAL.

BOLT·ON CORNER GUTTING EDGES Protect the corners of your bucket; reversible.

REINFORCED BUCKET BOTTOM AND CLAMSHELL Improves strength and rigidity.

INTERLOCKING SERRATED GRAPPLE EDGES Hold objects securely- even heavy or odd-shaped materials .

. ...... ~ ill·"l(t!£1rr) 12!in.(114•)nT) 7~5il(IW1·m) 8t4n.t2Qc.'lr;T) IU4n.(21/Urr)

~cror,;p.-J1 lDI!t-'lll."in) 11Bf1'1:1.3n'J 11411':JlLT'l H:lft'tll!>ril ~~.3ft';a.~Tl

Opnt19 v.~-g-o~ rmtt 13£.611'!1 6.>1h i:.Jff11l roan :.!•Jraful tM:>ih :4531,.\ t1ill n tom~01l

\1.J'"iEdT±!!t:• 1 a G 9

Op;nB.r.lii!l~)'t(!j 39.!t" (1\:!~mi 395n (10J.ITF) ll!tn(10J.\Trj Ltl..6i1 (11M 'IT') .:!la n (11!\Jrrr)

Cm-D&drt~{lf Zl3rll/19ml 2ll:lit(!11ri"'"B ZUn(ll!.tn) l:l£1l;B$JTT} J:l.finJB5JrrJ

~(Q 346n.(B79rT) 3-'6rl(i179r"iT) JL£ol1("1179r:-,) 3191t(937nr) 33911(~nr)

l'uB.J':ia(tm"'J()) .3>)n(iE2n) $Dn(7(2T11 :ltllt{;tlmj :!l9hji01LTr) :E.9nj1~14rrj

~'a<C\:H"!''>:l~ 659•Jb.(J:;S"61J;Jl O:r-?Oh(::.0%~1 059o)lh(J~S>j\{l) (.'lJLbiJ1QOie;1 (,')3Lb{31Mkjl

Ap~rG<d Mnl:lru: S•.d-St""rl(\)};r, Cconp.:>c1 TrOL~ LlXJd.:r. A~·\\hR1 S~ lroo.hl, ~.' Pilr;;.:~IJJ;;t.1tcr, lc;.k;;t~ l~L"tl \'lor( l.'.,:,;h'r~. \~IAI.OU:R-& TTC

~ Bobcat. :l:,'l:t.:r;;:.;;;;;: .. ;:::~.;;;.::;:;~· Bo bca 1. com/A II Alia ch

This mull!-use allachmenl can be used as a bucket for loading, carrying and dumping; as a grapple for handing odd-shaped objects; or for dozing, leveling and spreading material with the clamshell open.

COMPACT LOADER

CUSTOMIZE YOUR BUCKET FOR THE JOB,

Check out Babca/0 buckel accessories on page 34.

"ou::&::.'a-::Tjdd:.-... <lb"~"''"v--l!;n '""'14>b .. ~·-i'rf.,_,,.,_.~.,..

"'"' o,- • , l J • ~ • 'L l?S""'<0t"'~ ' Z" ~ ,f!: '"*"" ~ {' t.:; - : '"'

_3L CONCRETE MIXER . . 't ,~ r. · & , • c.·.··' il . DOZER BLADE ~:Jol COMPACT lOAD£8

MIX CONCRETE WHERE AND WHEN YOU NEED IT,

WITHOUT WAITING FOR A TRUCK. Don't waste time()( effort running hose. Bring the mixer to the mortar, gravel or sand and water, then pour concrete lmmedialety, right where you need lt. The concrete mixer transports, mixes and dumps concrete faster than a traditional stand-alone mixer and wheelbarrow- even In hard-to-reach areas. Its small sl2e makes Jt perfect for sidewalks, driveways, finish work, fence posts and footings or floors of small bulldings.

4791rl(1.2t6rr•Tt)

i.ayt1 lf1?.9hta31Smr.)

\k<jt 5-Hlrt(l:W.Srrm)

O.:n-..trgW&/1 Z<'!:).lh(Wil<ijj

S:.'rgllho0ur...10.J:r~1:r 50' {ll7rrnr)

Cm::~>~Cf'n.i:rO;m:Fy 6h.{l:'i2mri

Cm._-,.;:~C)<:rd:t&n-.:- 2~hiW7mn)

ft,:'r.OCH.:wtl~rQJ 15«<ip::J{SHY!lllli1,

Pun:in}f<.l•v Ullii3JJ)d'tlJ.n)"

l.~ri:JC)!f'dcfUf>TJ:'.£1 ;jfl(TG!TIT't;)

1,'.1</.'JF<J:-~~ 15\1t3..1mm)

\•.rh<l:ll-Urptgi-Lij1 tbt:>Y.lf1(15m)

A'purod l.ut~!ru: So•:..:! ~11£1 Lm~:1, fr·nxa:t lr..t:(lm.i:f.~.1 l'ol1c<JS•culm!.r

REMOTE ATTACHMENT GOIITROL Safely start and stop the machine and concrete mixer from outside the loader.

O~rqw._;;,p.

t<::.l]fl

!t.jft Pa:~dL'run&wJ

Ba'd\f.$l.:t{

4-40b.(21J0)q} 432ht\GWrrrrj

452h(1146rrm)

4()1t:q10'21lft>~•)

20rp;1(41t/rr0il)'J11(.DJ''I ti9fll[019m")

Ch:h

lt,&au5<:fh1P-dllirtmof11:

lhW~!!i:'iil'

920op11(3.l76Uor;nj

No more mud buggies, loaders with buckets, wheelbarrows, shovels or chutes. Deperufng oo 1',1lfl<ing cooditioos, this attachment can pump concrete as far as 250 feet horizontal~ and UJl to tl·.~ stories vertlca:Jiy. Standard-flow loaders can place concrete up to 18 cubic yards per hour. A hlgh-flow loader can place up to 30 cub~ yarns per hour.

The dfgger attachment acts like a shovel, but since tha loader does !he work, you save time and manual labor.

r ~~~~~n) 2l:•llt(l\•<])

tll~~~m} COb (\:12~ t12i~~) 3[171.J{1:;\l>g)

111~;~nJ l25tqtmll}

A~~rnd L!x.~l:ai:S<.iHL'"ffttui'I,Cm~tTrsXllal:t. l.t:;/Tra:(ll:0.}-..f

OPTIONAL REMOTE CONTROL KIT Operator can start the pump from the gmund without entering the loader.

Bob ca 1. com/A I I Alia ch

COMPACT lOADER

TURN YOUR LOADER OR UTILITY WORK MACHINE INTO A INI D ZER. The Bobcat" dozer blade attachment pushes large amounts of material quickly and easily on excavating and grading jobs that would otherwise require dedicated equipment. Adjustable skid shoes provide depth control as well as forward and reverse grading action, Choose from widths ranging from 54 to 96 inches.

ADJUSTABLE DEPTH GUIDES Adjustable skid shoes guide and control the depth of the dozer blade.

OPERATE IN FORWARD OR REVERSE Delivers optimum grading action in either direction.

CAST DESIGN (96·1NGH BLADE) Designed for handling the toughest applications, the 96-!och dozer blade model features an all-cast design for maximum strength and prodoctive dozing.

REVERSIBLE GUTTING EDGE Increases the versatility of the attachment and increases uptlme- giving you more time between blade exchanges.

O;o:RT•JI'k41

WUTttA) 5.1h(i372mn) eJJUJ?:U2mrr}

l!n;#I(S) zanqn:arr-.n) :nlri(B-\Jmm)

Wi'lt1;ft1CJ 2-lt\{filOITID}

1'.\:f<.ir<J\'Icttl G93U\i17GJmm)

ht:"fAil]ll1

""""' :t.Oriq .t.BO:q

UJ::J-']&1}? 04ht.!h 05hxfih

(13m:ra1{Qinr~rr.cG:k (lloTO!HI52rrrr1rc.,:rsb\::

S•l.IStlooS h!;u.;>;ot!., AQ·~"trt>:J

Bobcal .com/A IIAIJach

• Create runoff grades

• Sculpt landscape areas

• BackfiU around foundations

• Level, pile or grade loose dirt, gravel or sand

9'.JhtZZ&Gmn) 3Jh(8-'.SiTll-•)

.2~hlfi!Omr•)

7dh\10Cll!r,n) fiJi{Aro;f~d

±.'lJd:"]

.t.SO·g

t:JW1li71~1g)

!'!tjh.(2-.13""1<rmj

~31D\Ul..\rrm)

:t.::Od:-g.

.t.IOd.g

omu6h \1(ij.T";nxi52m:>)p.cdE

M)~t>:J

s"' t , :" "'

fL J 113 """'pi3 - * ;;:w

iao DR 0 P H AM MER ' ( r:' .. , • .'~ • 11 FL A I L CUTTER ill

COMPACT lOADER

PARKING LOTS, DRIVEWAYS AND OTHER

FLAT CONCRETE SLABS. The drop hammer delivers more lhan 3,600 foot-pounds of impact energy combined with a fast cycle time of 20 blows per minute to break and demolish concrete. It fractures material below, leaving the surface free of jagged debris.

DROP HAMMER VS, BREAKER: WHICH ONE IS RIGHT FOR THE JOB? Breakers are versatile demolition tools that allow a precision strike to break material apart They're perfect for a w!de variety of concrete structures. A drop hammer Is best suited to larger, flat areas. The drop hammer delivers more force per stnKe, shattering the material with fewer blows. C<Jmpare<l to standanl hydrnulic breakeJs, the drop hammer also generates less vibration and no!se, meaning less wear on the machine and a quieter environment for the operator and bystanders.

f~;- D U M P I N G H D P P E R ' ( ,/ . , • •

MOVE MORE MATERIAL AND GO WHERE DUMP TRUCKS CAN'T. The dumping hopper mounts easUy on a Bobcal11 loader and can be transported, detached and parked in construction sites, backyanis, buik!lngs orwhere~'er it Is needed to receive or dt.ullP materials. The large~capaclty, easy. to-fin hopper empties qulckty and easily, saving time on back-and~forth trips between a dumpsite or receiving truck.

~n}W,;_Jii 6G5b(3Dln.J) 1190ll.!(S«<Il:JI !lo'i!pt 4:JhiHlt611Vl) 4illl!1016mm) C.lll:ill( - 675!t'{t92m) fl~_,j IJ79ft'12.5m)

"""' aJln.f21Hlrrx"} 631! !21M 1M~ wan 3131n (914mTr) 3..\ln(2133rrnl

Bo be a I, com /A II All ach

COMPACT lOADER

CLEAR BRUSH AND SMALL TREES. With a cutting width of 78 Inches, the flail cutter delivers excellent cutting and mulching action.

VARIABLE DISPLACEMENT MOTOR The variable displacement motor allows you to match the attachment to your carrier's capabiHties with a simp!e adjustment of the hydraulic IIO'N. This feature is critical In the rental market. Use on machines 1\ith hy<lraullc flows ranging from 17 to 40 gpm.

THREE CUTTING HEIGHTS Adjustable cutting height for a variety of terra:ns and brush types.

AUTOMATIC BLADE SHUTOFF DEVICE When the nan cutter Is raised off the ground, flail rotation stops to prevent debris from being thrown.

ADJUSTABLE REAR GATE Open or close to vary the size of discharge opening.

FLOATING LINKAGE The flail cutter floats over ground contours, maintaining surface contact for the best possible cutting performance.

FULL-WIDTH, ADJUSTABLE TAPERED REAR ROLLER Provides greater tumlng abllity during operation, making it eas\er to maneuver the flail cutter In tight areas.

COMPLIANCE Complies llilh the SAE JtOOt standard for lndustrtal Orul 111(1J,ers.

WilEN TO CHOOSE A FLAIL CUTTER OVER A ROTARY CUTTER The flall cutter produces a finer mulching action and minimizes the bunching of material that can occur v.-hen culling thicker brush. It also has a tighter turning radius and more flotation than the Brushcaf' rotary cutter. A rotary cutter produces a more uniform cut. Either attachment \\ill cut down branches and saplings up to 3 inches In diameter.

Formoro Information on the Brushcat rotary cutter. seepage30.

For 72~ and 90~inch mower attachments, see page 52.

Bob ca I, co m/flaiiCulle r

SPECIFICATIONS ~ "'"' ""'

Ct/!irgWatJ

IJY"Jil'ioth(C)

Fro ttlrtm:rs

f.J!l'll"Qf=t.J

E'a:laTIJS,'Kf.-d

1G~I.J.(7461;;J)

5G.9b(1445rw,) 2971n(754rrTr)

78v{19alrro1"1)

91111(2311m;n)

17-40g;1l'(£..1-151Um:ilt)

e,-,rmmtL-ru!ll:'t!n3l~OC"'fl::""rt.1'

5200Jt/Jrlll@2000rrrn !.lOC(IftfiTlniiil22DCJrpTJ

,\jlprand J,lu~k~I:S0:l-S~=T Ulado:t. Cco:TPl:tTfill..(lm~r, A'l-\',t~ ~.-R lmdor, Tc.J-.zf' Ut;rr(Wc~~ lhdk~, v~;stiAI.DlER~ nc

A COMPLETE

FORESTRY PACKAGE FOR UNWANTED TREES AND OVERGROWTH. The forestry cutter turns unsightly trees and overgrowth into mulch. The compact size of the forestry cutter allows you to complete any type of tree removal job, whether clearing every tree in an area or selectively thinning stands. In just two steps, you can shred trees from top to bottom. First, bring the uppermost limbs to the ground by punching into the tree with the forestry culler. Then, lower the attachment over the trunk to rip the entire tree to shreds and add organic material to the soil. The forestry culler's tube-style drum and spiral tooth pattern allow one tooth to engage at a lime, so operation is smooth and less horsepower is required to do the job.

ADJUSTABLE PUSH BAR Has three positions to accommodate the operator's preferred setting.

CDUHTER COMBS Provide the ability to do fine mulching and provide wear protection for the rear of the housing.

OOUBLE·TIPPEO CARBIDE TEETH Efllclenlly rip through hard and soft woods, pro~d1ng long lfle and uptime protection.

LOW HUMBER OF TEETH Provides fast knockdO\'m of trees and low-cost replacemenl

PRESSURE GAUGE Visible from the seat to help the operator nm the attachment.

ROTOR DRAKE Stops from full spood in 10 se<:onds or less when the forestry cutter's hydraulics are deactivated.

SAFETY CHAIHS Reduce debris thrm•m to the rear.

SPIRAL TOOTH PATTERH Allows one tooth to engage at a time for smoother operation and less horsepower demand.

TRAIHIHG RESOURCES Train operators and tedm!cians in the safe operation and servicing of Bobcats equipment. Trninfng materials are availabfe at your Bobcat dealer's parts department or online at DOBCAT.COM/SAFETY

OPTIONS AtiD ACCESSORIES SHlGLE-SPEED MOTOR: A set speed and truque setting that remains constant during operation.

2-SPEED MOTOR: Automatically adjusts rotor speed and torque. Wilen cutting heavy material, the motor shifts to a lower gear for more torque. When cutting light material, U1e motor shifts into high gear for faster drum speed and recovery time.

FRDrlT GATE: lowering the optional front gale reduces front discharge of material and promotes longer processing into finer mulch. The gate can be quickly added to any Bobcat:& forestry cutler.

A~prqrd l.h~~ln$:S•.'J S.~i.'d Lo.:C,l. C•.mp.l!..tT<;l:"(U.~r. Al \',t"="'l S•,;o;:r l.m:.tof FmslrjA;plltJI!cnsK!Ir~vired.

Bo h c a I. com/ Forest Cut Bo beat. com/Fore stCu I

FORESTRY APPLICATIOIIS KIT Designed to protect you and your Investment in the toughest conditions, the Forestry Applications Kit must be Installed on the loader to operate the forestry cutter.

Forestry Door (0.75·1nch laminated polycarbonale)

Front and Rear Light Guards

Hydraulic Ouick Coupler Guard

Fire Extinguisher

Levell! FOPS (meets ISO 3449)

Engine Compartment Seal Kit

Top and Rear Windows

Polycarbonate Side Window Kit

GRADE SURFACES WITH PRECISION AND CONTROL. Achieve a consistent, accurate grade with the Bobcatl'l grader attachment. Even delicate tasks can be completed with powerful precision. The grader attachment has a blade that can move eight different ways to grade any surface. The bolster oscillates to minimize the effect of uneven ground, delivering consistent grading performance in a variety of environments.

SIDE-SHIFT Grade next to bu1dif19S, poles and other obstacles with ease. Manual side-shift on the BH1ch model moves the blade up to 121nches to the left or righl The hydrauuc side-shift on larger modes moves up to 13 ~ches to the left or righl

PROPORTIONAl HYDRAUliC VAlVE The moldboard can be raised or lowered at three different speeds, meaning operation can be more closely matched to the speed of the loader. It also provkles finer control with automatic grading sotutlons,

OPTIONS AND ACCESSORIES BOlT-ON END VnNG KIT: He'ps to carry more material v.11:;n !Ina grading or spreoo ng materirds such as sand or gravel. Turns the grader into a box blade, e\lm'natlng the need for an add1Uonal attachment. For 96- and 1011-lnch graders only.

SPECIFICATIONS GRADER44 :; llRADE!l~6 '%

o,n;:.•rgw:~ l375lltli:i5"-l 27E31J(l2l.iS~g)

Wttl'!lAI B4h{2t:i4ll'\il} SOnJ2-l131'T1)

W~fli'iA."'}\:-d(B) 7llllill1933mrn) 813R(21lfirr;'11)

tii:!1~f..">J<"'IC! 1l.icf11. ~!tog

E.:J~~rWatliO) 4951,1(1?.57rnrn) S7B~(14G:lmn)

ll£nH.if911lt) 945i1124C.OJ!m) 1D4ilta:>i2<r1'11) O..:.<:!lll.:~if)(.•,-;::db...<.-rp~) 411il(119.frcn) 59.9h(1illmm)

fklli'Hc~t(G) 14..91n,j378mn} 17h{ol32mT1 MY L.d'lill) 61llrt(173rr:rn) 68h[17Jrnn)

Mo~~.U1Dc1!1'lJ1J 45lilf114mTI} 74hj1f;\3r'·7<} EW.:Bl.'Bp) 431n.(tllqrrm) 477h(1Z12rn"'1)

ltpat.LEEi.:f>&-#Jt .±1Ji~p."t11l'Tl}

M.:Jnu::J£hlcS.:i:!Sc't ±121nt3-J5rnn)

0t!i:tJ!:rl,J.11Rc.~} ll51nx6M n m,1 x a ~1. E.:JhrtEa2h~l ilirt-q. ±.12&9 G!:'d'PilurzrJ#tJlla;;;;i :±.fl25hVlm:r~ -;~:{11.;;1Jl;llffr1l)

UG1ll(t29J~lJ)

1001n(27-t1rrm} 937hf23:;{)1fiT.)

c±:iiJO:<;

5761~ t14Gl11liT)

HW~it!Almrj

599),1(1522mn)

17hl432ll'm)

B8h(173rrrr.)

74nt1Balm'<} 4771n (1212mr)

il3lnf130mro)

OfifH6.11

±.12!1:~

±fJZ5hJ1imT4

~~~ SIOE·SHIFT

SIDE-SHIFT ~~~

BOlT-ON END WING KIT

Bobcal.com/Grader

UPGRADE WITH AUTOMATIC CONTROL SYSTEMS FOR NEAR-PERFECT ACCURACY. The grader is your go-lo aUachmenl for precision grading. Achieve ±0.25-inch accuracy or baUer wilh one of lhree aulomaled control systems from Bobcat.

LASER-GUIDED SYSTEM uses laser transmitters and a grader-mor.mted receiver to accurately grade construction sites and other open areas.

SONIC TRACER/SlOPE SYSTEM provides the best result on complicated jobsiles with columns or other obstacles that would block a laser transmitler.

3D SYSTEM allows contractors to usa digital designs and 3D machine control to quickly and accurelely sculpt the land.

Bobcat.com/Grader

WATCH THE GRADER AT WORK: BO DCA T. COM/ORA DERVIOED

FOR MORE INFORMATION:

Check out Bobcatv. automatic grade control on pa!JfJ 22.

~Bobcat. F-;,. ,_,.~•o;c•,.,-• ~.d,r-.r 0>"4~0.1-.'<d,.-.;:n .tt~b<>~_. • ..,.~.,.t=$-.¢1.1"0

BULKY MATERIAL AND ODD-SHAPED OBJECTS. The <ldustrial grapple delivers easy handling of hard-tomanage materials in the industrial or COilStJuction setting. The two-arm design of the larger industrial grapple grabs hold of material in two places. As a result, you get maximum contact with material and strong biTing force across irregular-shaped loads. With easy-to-use hydraulic controls, any operator can securely handle bulky or uneven loads. Built for day-in, day-out duty, the industrial grapple sinks into the toughest jobs all day, every day.

Bobcat. com/1 G rapp I e

DUAL CYLINDERS (largegrapplesonly) Oual cylinders provide the abllity to secure uneven loads.

OPEN GRAPPLE DESIGN Offers superior visibility to the work area.

REMOVABLE HOSE GUIDE Provides easy hose routing when the grapple Is attached. Reduces exposure to snags and oUter hazards.

REPLACEABLE CUTTING EDGE ON BUCKET GRAPPLES Standard equipment for bucket protection.

REINFORCED TINES BobcaP tines are tougher, backed by more steel and greater reinforcement.

Bo beat. com /I Grapp te

CO!IPAC!lOAOER

"<'=c:o'<..'.:r<dd~-.,,·cto,__;.,---'"'"<r""""' ;±7.~~ut.=-.,./•=P"7·""JOII.<=t-rl-""o ~Bobcat.

UT THE BITE ON ROCKS, ROOTS, BRUSH, OVERGROWTH AND DEBRIS.

The root grapple rips Into tough jobs with ease.A heavy-duty design Improves the wear life of the grapple, especially when operating in toogh land-clearing jobs. It's ideal for landscaping, demofition, construction, rental or grounds maintenance. Tear it up, bne lt olf and spit it out with the root grapple.

CURVED SKELETAL TOOTH DESIGN Picks up material wfthout driving teeth tnto the ground; allows dlrt to fall on-site.

FULLY ENCLOSED MOUNTING FRAME Extends wear life by m!nlmlzlng flexing In the frame area.

EXCLUSIVE: INERTIA-WELDED CYLINDER ENDS Exclusive Inertia-welded cylinder ends from Bobcat deflver strong, smooth operation by Improving hydmulic rushioning at the end of the stroke.

DUAL CYLINDERS (large grapples on~) T110 cylindem provide the abilty to clamp separate~. secumg uneven loads. BobtaP" grapples provide the highest clamping forces In the Industry.

2a311l ~!1181"1 \SrTcn) (fo35mnl

App!Ovtd Mtek!nu: S•Cd Stt-erln-:;.,rer, L•JCn-nc1 Tro,._~ loa·kl, M \',htt!S~!J:\Dd, l.'.d Trac~ li>l&, v~r~Jli,V,DLER"'TlG

Bobcat. com/Roo tG r apple

SINK INTO

HARD-TO-HANDLE LIGHT MATERIAL.

The utility grapple brres down and takes hold of even the loosest materials. Pair the grapple with a fork or bucket to handle a wide variety of farm and ranch jobs. The compact design of the uWrry grapple allows you to get the fork or bucket close to fences or sides of stalls to quickly clean up or move light, loose material.

CURVED TEETH Use the grapple to scoop up even the loosest material. Teeth are replaceable to minimize dovmlime.

FORGED TEETH Provide exceptional strength with low weight, allowing for more carrying capacity.

MATCH THE TOOL TO THE JOB: ADDITIONAL TEETH Quickly and easily add more teeth. In just minutes, you're ready to handle smaller materials efficiently,

~571.1.(71 t;:))

1DiJtJtllZ<Q) J2..7h(8J1rm)

WblllO'(,lj 3-4ah :&4flTil)

zm.~t11Dl'dl 3431rl(B71!1T'r·)

243h(t!OI<i]J 346ht1:1D4ITIT)

Bo beat. com/U Grapple

2llflhiTJ2ffm) 417htW59mm) 3t!llnjV:IOmr.j

294h{7-IT1r11) 41.91~(1GG3rm.) 3>J.31rt(770rr-11)

~.3hi744or-mJ 41.9i<q1DG41ml) 30.51~ttn5!1V<}

~Jin(744rr11) 419h (1064rrm) W41nt772.rr-m)

2!'19h1T:Ol~~mj 42.3njl014rrMJ} Z9...9l:!J15flmm)

~Bobcat.

~~-~z~ , , I * J%$ft;.~l~ ~ ~:;::;~~~

j~D~. LANDSCAPE RAKE '( r~ \', · " cf!, .·.'1 .~:I . LANDSCAPE RAKE ~ctiJ~

COMPACJ lOADER

~Bobcat. f-<.""'d"'-""'4"-,du-".,.4•4-$'••b-~::n >'7-k~u!.cc.,;<..,~rr-<=fol!•=•-of..•:>o

Rake and collect surface debris while smoothing and leveling the soil. When full, jusl dump lhe collecled debris for a dean finish.

60 & 72/NCH \'JOrlK!/IG WIDTHS

II

So beat. com/land Rake

HARD TEETH For maximum uptime protection, the teeth are hardened to withstand more wear and tear when wnrking in the soil, Increasing the life of the attachment.

INDIVIDUALLY REPLACEABLE RAKE BARS Deliver better ground contact and better leveling.

SIDE SKIS Provide adjustable depth control, leaving only a slight, knife·edge mark in the flnishOO surface.

TOP COVER When materials have been collected, the top cover opens for easy dumping, allowing you to leave a deaner finish behind.

• Prepares seedbeds

• Levels soil before turf placement

• No electrical required

Rakes and collecls

• Collects surface debris for cleanup

• Readles la~·ms for spreading topsoil

Dumps debris

"""' ~.::~~~;~ 61Jh(160Jrrnr·)

~~ ¥..141.1{1026aor~

l'is•.;nJ\Y"'':h 60h (IS241TTT~ nlrttta<"9rrrn)

O"'r.<llW¢11 £U6h(\031tTT') 76fih{l~3rrm)

OY.rLr>JI'.'~ ltG9b(5C<3<Q) 1237ll (561 ~lJ)

t.trl'I"F.fcilt.t.lftl'.l"J " 12 t,w.o~rdT~(I::<tl1 3M 4:6

~iff 1.2.\ft.'tOj.lm) 14Jft1(0¥.1crii

A~ttt-n<1 MH~Inu: S<.d-Sfff.'l lJ."~J~kr, Cc·Tr>.:o.t Trac 1Lo.!J.:r. A.l l'•t""l S~""' lt\Z!li:f, Tv:-t;;CL.ntti'A-r'(/,1Yt-i."'

Scrapes

REMOVE LARGE CLODS AND ROCKS WHILE LEVELING AND GRADING THE GROUND.

Working !n either forward or reverse, the landplane makes it easy to break up hard ground and level a surface. Use the landplane to peel sod or aerate soil for seeding. No more back-breaking hand-raking. A removable metal grate helps break up clumps, and a bl·direct!onaf scarifier helps loosen stubborn soils.

Bobca I. com/A IIAIIach

Q.;uctrgV,\.~

4:::=~~~ ~~)~:t~~~~q 70'Jlli:ll<HZ])

\'{ct'l 79ntaOJTnnj - ~61\\11e..l~rrr) 515h(13~m-n) 5151,\ ('IYNlTliT~

lki}'t <1Hiirq523rrrrJ .<D9h\S::f1mn) :<lJ!lh\531!Tf11)

D.tt,~WJ!~ 05x41n(lh1CQ~rm) 05x(llr\{13x152Jr,r;) 05x6h(l1X151!l'm)

1',\-rlnJO.l-'hS~.::l'··:r 3hfli.i.rx:n) 35!rt(li~!Tfl') 351n.t&9!Ul"1

A;l~rG'Id )!::a,dlru:S-.11 S!1o:r Lm.1-:r, er,mr.:a:t lrc.:~lro,:h, Ag Wt·,·tl S•c,-r Wl:f,l.'rllr.:nlfi~J;·f, To..:.\:LII- Uto,lf\',c(~ ).'J,:t;,-,~

;:,;.. "'"';;'c..• ;.-td>-J. . .-0' •·d~,_,.,_-,, ,..,,,- ... "' ,•..ze.obut="'-"<'"'>'~ol!<=>-~l-~• ~Bobcat.

The mower is the Ideal maintenance attachment for landscape contractors, nurseries, hobby farms, municipalities and large-lot rural homeowners. This front-mounted unit delivers excellent visibiliTy to all corners of the decl<, so you can cut efficlently around obstacles. Powered by a direct-drive hydraulic motor, the mower attachment features three overlapping cutting blades that eliminate skips for even cutting action. The unique frame design allows the mower to oscillate independently from the loader. It follows uneven terrain, delivering a close, clean cut.

72 & 9Q INCH AVAILABLE WIDTHS

ANTI·SCALPING WHEEL Protects the mower blades from damage caused by sinKing the grm.md when mm•Ang over uneven terrain. Also, prevents the mower dec!< from scraping the ground, resulting in longer blade l~e and consistent cutting height.

CASTER WHEELS Combined with the attachment flame, the caster wheels allow the mower to oscWate independently of the loader, providing a floating deck that better follows uneven terrain. AdjUst for <frrferent cutting h~ghts from 2 to 5.5 Inches.

BLADE MOUNTING Dual mounting bolts make blade replacement easy.

DECK BRACING Located on the top of the mower, albNing for a smooth deck Interior, delivering Improved air and material flow.

STANDARD REAR DISCHARGE Allows you to get close to stnmtures and obstacles. It also dispenses grass clippings evenly.

BELT DRIVE The hydrau11c motor powers a single V-belt, eliminating shear pins and related OO.vntime.

BLADE SHUTOFF Incorporated Into the attachment f111me. Blade rotation automatically stops when the mower Is lifted too high.

For clearing b!US/JnndsmaJJ iJM.~, seslhn !Jafl £tJIJer on page 41.

For a mate unifmm cut, see the Bmshcatw tDfiuycutter on page 30.

Bobcat.com/Mower

~W:dtl

fM.l21~{tt!IA)

O',~:r.illrnift1til)

tk'¢1

O,u:J',rOJI'.'c'gH

Bobcat.com/Mower

7151r1(1316!1'.,.,) Efl51ot(22731l1T1)

T!lhj11l30=l 9-li'l\Z>&lmt<)

fi31o1 (1727m-,) 7Sin (1905mm)

Z!llj5:"Am,r1 Ulnf5,r,9mr1

flWI:!(39'loJJ) 99JIJ (~4'9•.g)

15l29'111(57B3lfl<ill) 152l(l:<nt57fl3Vm£Jj

3 B.Stt(27Umm) lt5111l1Gm)

2551n 2551n

OPTIONS AND ACCESSORIES MULCHING AND SIDE-DISCHARGE KITS: Available to easily convert your mower

to fit the application and the crurier.

• Oscillation ~lows the dack to ftoat, pre~Wtlng scalping and following uneven terrain

• Delivers clean, even cut on rights-of-way

• Front-mounted mO\•Jer ellmlnates flattened grassbeforethecut

• Three overlapping blades

• A~ustable cutting heights

I WHERE YOU NEED IT. Integrated, walk-through frame provides easier entry/exit.

:UJh[alltrrr~ 122h.{55"}l 42h(!Cif7n>'} -liqt02rrm) tSOlJ.(ffi~ 2T.!b(lZ1<Q)

4l2h-tUI'l1~rrr)

3~.1h (871m') 15lh(69•;;il 42h[toG7rrm) 4in[1Cr2rnr,) HHI!l (7~ ~Q) 31711 [14~ <g) 4Bhp2tqrn,T,) lflllh (fQ ~J1) 3~11[1~\:g)

3-t3h(l37tmn) MI1{1J-I·W 42TqWG7mrj -liqt(!b:,:;j 21.'iht'W'"1J 5\0b.\231\-.:J) 431\I1Ztlhnn) ZJllb[MIQ! 53Jtq2-1:2'i):)

:Nbtt9'11rnrn) 1375ll(61A-lj") 48blt1219mn) 4bt(1021"',-.j 2lil!JtWHQ) 15.<:151J(72J<g)

5Hh{IJI3rrm) 49lb.t?23<ql 43htt219~r,n) 4h.{I02nT•) 2nh(lZ'Hq) 7li41JtJ.t7<'J) :ill.lh.(IB~ f1-iflh(3117'{1)

Bobcat.com/PFork

Pallet forks do the lifting, carrying and moving to save time and labor costs on a variety of applications. A new walk~ through design offers easier entry and exit to and from the loader cab, and it gives you best-in-class visibility for picking and placing materials. Adjustable forks load, lift, move and place materials around jobsites. With the hydrau!lc pallet fork, position the forks from the operator seat for maximum operator comfort and efficiency.

An optional brick-guard to close off the walkthrough area is available for standard, heavy-duty and severe-duty pallet fork frames. The optional brick-guard height extension is only available for severe-duty pallet fork frames.

ISO 2330:2002 STANDARDS The Bob cal" pallet fork meets ISO 2330:2002 standards for yield and fatigue tests. The frame Is tested to the same standards as the forks.

IMPROVED VISIBILITY Walk-through design provides optimal visibility to the pallet fork tines when picking and placing materials.

STANDARD AND HEAVY·DUTY TEETH Available In 42- and 48-inch lengths. Bale forks available In 40.8-inch length.

EASIER ACCESS Walk-through front frame provides a comfortable entry and exit to and from the loader's cab.

HYDRAULIC FORK SAVES TIME AHO EFFORT Conveniently position the tines without leaving the cab.

Bobcal.com/PFork

l:t:<lll(ii')<J<ql

1700bj7701<11

l!KiJP.l.\Bt\<Jq)

2!00b.t.950"<.!l 23-XliJ(lQ..lCl)JJ\

250)b.f1BO!r4l 27Cr0iJ\1Z25<q)

30C(Ib

G551.q2951Jt)

B-t5b.~Y:IJ'<;!)

\I;DI.J(45Q)Jt)

UCQh.(4T5~

11:-<JIJ(520"J} ICQI.!.($5.;:!1

135!JIJ(G10);J)

16E!Jh(7t"{{g)

CUT AND MILL CONCRETE OR ASPHALT. Less expensive to maintain and more maneuverable than dedicated planers, the Bobcat» planer cuts and mills concrete and asphalt. Utilizing carbide-tipped bits mounted on a revolving drum, the planer delivers low-angle, high-velocity blows to uniformly chip pavement In a controlled pattern. Depth, width and slope control are easily set and maintained by the operator. Milled rnateriai can be immediately recycled.

14·, 18·, 24·tNCH MODELS: • Removable right ski and end plate

to allow for flush-to-wall planing or quickly changing drums

• One-piece concentric planer drum

• Free-floating oscillation

• HydrauiTc side-shift

• Oscillation up to ±15 degrees

• Top access panel

• Side cutting teeth

• Rear-mounted steel wheels

18· AHD 24·1NCH MODELS: • Priority va•e to divert ~l to the deptl1

function and enable adjustment without loss of power to drum

40·1NCH MODEL: • Front-access panel to save

time during Inspection and bit replacement

• Diverter valve to switch between hydraulic side-shift and hydraulic oscillation functions

• Two direct-drive motors to Increase torque, force and productivity while Increasing attachment life

GET IN CLOSE TO CURBS AND WALLS, ! Bobcat planm lnolude standard hydraUlic side-shift. 1

TRAIMIHG RESOURCES Trainoperab:sandl&:hmdansin thasalaoperatrona'lds.e:r;idng cfBobl:al'equtpment.OperaiM iralnlngcours.es,safetyvideos aru1 olhe:r (Talntng materials ar~ ayadableat~ourBOOcatdea,l£r's.

parlsdepastmenloronllooa! BOBCAT,COM/SAfETY

Bobcat.com/Pianer

14-tNCH STANDARD-FLOW PLANER Provides excellent performance on standard-flow machines, allol~ng a lowerl~'tial nwestment fortllose ~1loon~need to use a planer periodically,

' HtGH·FLDW PLANERS Utilize Increased hydraulic horsepower available for higher proouction. Use witl1 tl1e Selectable Joystick Control (SJC) speed management to find the "sweet spoe and stay there, maintaining full driveline torque and hydraulic power to maximize performance while reducing fatigue.

• Clean up around larger miller machines

• Mate uneven pavement surfaces

• Cut drainage In parking lots

• Taper edges on roadways

• Mill around manholes

OPTIONS AND ACCESSORIES

181/f, "':!!.IlL JIIGHfLDW li!GtlflOW

1191b(54'J•q) (1.fodtm)

475htt100mm)

16l1(457rr.n)

D6hjl:.:lmT4

FAST-CUT DRUM: Has wide spacing between bits to provide ultimate performance. Resulting surface Is usually overlaid with new material. Multiple options for 14- to 24-inch widths.

GUIDE ROD KIT: Makes it easier for operators to follow a line.

HYDRAULIC OSCILLATION KIT (18- and 24-lnch planer attachments): Provides linger lip control of drum osc.Jll;'l!ian,

OPERATIIlG TRAINING KIT: Available for order.

SLOT-CUT DRUM: Cuts a trench through concrete or asphalt for laying utilities or removal of a section. Available in 2.5- and 4-inch widths only.

Bobcat.com/Pianer --------

TOP SERVICE PANEL

SMOOTH-CUT DRUM: Nearly twice as many bits as the fast-cut drum for a relatively smooth surface.ldeal for exposed surfaces.

SURFACE DRUM: Leaves a smooth finish. Often used for remov;ng paint lines from roadways, the surfm;e drum leaves a sha!!c.w trench that may be filled !n with nt:w p.1irrt, Ult'lmoplasllt:S 01 mftACU\'e tape.

WATER KIT: Provides dust suppression and bit lubrication to maximize bit life.

WEIGHT KIT (18- and 24-inch planer attachments): Improves performance by providing inueased downward pressure on the drum.

TEAR UP THE ASPHALT AND BREAK UP HARD·PACKED SOIL. nm front-mounted scarifier operates when traveling in reverse. A manual lock holds teeth in positioo for steady results. Ad;ustab!e depth skis allow you to set the dlggng depth.

O:.tirgW':Jjt \'{dt!

l.llTG:tdlt£ti'l

Mn,L'90c:ttl ~Ji!t:{;f

Ap,rctdUnhbu: B::1St;:nl.ocd:1. Cc<K>l..iir,c~!..re;:tr. A!l't',~;;dSWI.ra'kr

SCRAPE AWAY PACKED-ON OR BUILT-UP MATERIALS. The scraper slidesa!oog the ground, easily breaking up packed material to leave a smooth surface behind. Remove tough materials such as mud, SYJN and IC<!. It's also a handy aid for cat]le! and floor tile removal. v•th its self-sha!peo~g cutting edg~ the scraper cuts t11demeath material, easily peeling it <NI<rf for removal.

0:-.r.:nJ\'t'#t

I '*It l'idll

ApprllldMadlnes: S•:j Stc.:rlr8:i:t, eorr.:n:t !ri:c'~ (.roj:r,AII'•I•:'i~S'xr\.ro:k:f, lolt.;t~ Utl:ff\'iC(( Ml&ore~

"JS j J' ! t

i!~ :' · S EE D E R • S I ~ T [F ~ N C ~. I N S T A H E'R

PLACE SEED AT THE PERFECT DEPTH, WITH THE PERFECT SPACING. Unlike broadcast seeders, the seeder attachment is a grolllddriven mllhat seede oroctly into the S<>l.ll'ls arows for better germination and mare precise coverage. A front roUer firms the gromd and presses small rocks beneath the s!IfaC<l 1'1fi1J pressing U1e seed Into the seedbed. A second roller gently forms soil around the seed' for optimum seed-to-soil contact Got the job dooe at a rate o1 more than tl'.~ acres per hotr.

3·POIIIT HITCH MOUNTIIIG KIT arso avaitab!B for compact tractors.

MEET EROSION CONTROL REGULATIONS AND AVO!O COSTLY FINES IN LESS TIME. The silt fence Installer places and secures silt fence at an aston! Etling rate- thousands of feet per hour.lt's the fastest, easiest and most economical way to meet compliance and avokl fines or shutdowns.

3-POIIIT I! lTC II MOUIITING KIT also available for compact tractors.

oxn•rgW;_·~

luqn 775Ul(352~)

1Z8inttM91TlT<) 4550t(ll:limr·l

1Uh.(l\73mn)

CHECK OUT MORE BOBCAT' ATTACHMENTS THAT CAN BE USED FOR SNOW REMOVAL:

ANGLE BROOM .......... {!Jge 18

SCR4PER •• , ........ , .. {1Jge58

SNOi'IBLOVIER .. .. • .. {!Jge 60

SPREADER ...... ..... . {1Jge68

Bobca t.com/SnowB ucket

GRAB A BUCKETFUL OF

COLD, HARD PRODUCTIVITY. Snow buckets are cost-effective and straightforward, but don't be fooled by their simplicity. These are serious snowremoval tools. Around cars in parl<ing lots or driveways, you can get nice and dose, or pull the snow away from obs!ades for another quick pass. They breeze through paths and driveways. And after the pushing is done, they're just the thing for moving piles of snow out of the way or loading it into trucks.

• High back and sides maximize pushing productivity through snow

• Waffle skid plates add strength to cutting edge and bucket bottom

OPTIONS AND ACCESSORIES BOLT-Oil CUTTHIG EDGE: Provides longer life to your loader's bucket.

BUCKET SPILL GUARD: Bolts onto the top of your bucket to reduce material falling over the back of the bucket.

• Optional bo!t-oo side guards increase capacity

• Bolt-on corner cutting edges protect against wear

TA 1~

f-----s----1

111111111111111 " B'.::..:t c~~t,'o}'(f.<_n1 ~~dltl "" 74h !:Oil "" (1727 ~r,T1) (18&0rnr) (2012rrnT') (ll35mm)

F<c•.dl-J.:l:;t~',A} 259h .2\i9h 259h. :a!9fL

\f.B.l!frr~ (IS,S:.Jr.m) (0$3.:rm) (&S:.Jm:v)

Bt1.Atl<nt'JtB) "" 4201 4211 J2h !JC(i(im~.) (lOC{lmn) tlCCGrr.n) tKCG!ffil)

Eu-'<10xr.:trg\Ytift srtm- &J3b 640t). "'" (all.q) (216o;;B (Ctl~ (X<ili.;Ji

E'cO:•iiC3.:n::tt(tSOIIcu;n1) 2~51t' 2il9fl' 2S2ft' 324ft' (00ml ((J7ijm') (083m) (0!?2m')

&£<aCa'Wl'f(l9JS-.-~oj IH5fl! 20.2f1' 2t()fl.' :l.Jtfjl

(052!1t tD57on {0fi2!TI} (0ffim-J

AtprcudMaehlnes:S<ciS!iloiU:'3:!,.;; 0-.rfi).J:ITra::~~.M \',~.,IS',.;rlc·W. Teo. \:a~ l~<:tt>'M~ 1.'-l':lirP.. \'•_,-;.:JlA . .',OlER~ TTC

l{L()Jr\

(~Jrrr.)

:run [8!6mnj

4S5h (1232rrre)

STah tU3~q\

542ft' ttS.3ml .natt• {1Wht)

" ' ' '" * •• : ' 4/1-,4! "~ ho SNOWBLOWER '( ,~ ... , ·, .• I SNOWBLOWER 81

COMPACT LOADER

THROW AND BLO SNOW TO CLEAR A CLEAN PATH.

Deep drifts are no match for the Bobcat• snowblower. Blow snow off driveways and parking lots or light spaces ftke sidewalks. The rotating cl1ute and deflector bank snow high or throw It far. Adjust the deflector up or down and point snow in almost any direction -wherever you want the snow to be placed. It's perfect for tossing the snow In places you can't reach with your machine: in the middle of a lawn or in a wooded area beside a path.

CHAIN·ANO·SPROCKET SYSTEM Rather than cables, a chain-and-sprocket system rotates the chute, ellminating loose, tangled and frozen cables and providing maximum uptime protection.

DIRECT·DRIVE HYDRAULIC MOTOR Delivers necessary operating power white reducing overall maintenance costs, extending the life of the attachment, and eliminating the need for high-wear items such as gear boxes, chains, sprockets and shear pins.

ROTATING CHUTE AND DEFLECTOR Chute rotates up to 276 degrees, and deflector adjusts up or down as needed. Point and place the snow wherever you want.

REPLACEABLE CUTTINO EDGE Protects your uptime and reduces operaUng costs.

SKID SHOES Ad1Ustab!e -set them to scrape the pavement clean or move them higher to remove snO'N from gravel lots and driv6\vays. 36-84 INCH

AVAILABLE WIDTHS >----------1

Bob cat. com/Snowblower

OPTIONS AND ACCESSORIES TRUCK· LOADING CHUTE: Avrulab:e for hlgh-f!ow models, the truck-loading chute allows the snowblovm to place soo.v high in the truck for easier removal and hauling.

HIGH-FLOW MODELS: Utilize the extra h~'d!aui!c horsepo•,o:ar In your h!gh-flo•.'J Bobcat loader to power through the heavy SOO\'Jfalls or the deepest driftsandthiowsoowfarther.

Watch the video to see the snowblower In action.

BOBCAJ.COM/SNOWBLOWERVID!O

llll.llllilitliiiiiiitiiiiiiii \'I>Jt!J(A) S'!l41l 5141 fi25r\ f!lSI1 7!511 UJ5r\

(l!KOn) (riC<6rr) (1~-37n) (170rT) (IL)3rr) (2.).:Sr.r)

)~"'ft\BJ ML1 ~4lt

(11:U)n) {12h)!'T') l~Tn) !1!.4'~TnJ

Lo-g'i(C) '" Jlh 3l:.n. 315n. (~Jrn-·1 ;S.t.Orr) t97ilr.r) ;9fllTf"')

!~fDj "' "'' '" 25h ,,, :on f,;il4rr.} :5SLn} jtl5m) ;6Y.ln) tv:Urr') ;fi.l5TTI

o-~w~•Jt "'' "'' 7S5l:L mOlt:. O:Ob W)b. {1941:QI l£1\l.g\ (3561']1 {:<i?l:gl {37910}1 (Dl~)

hl~[)!.'}Td;:J '" bh ""' "'" 20!1 l:iSITT) ('l£11nnj ;:,ililm} f:)i),]-rr-) ;:,Oi'mr)

A:q:rD;nrt1 '" 14in. '" 14n '" {35!lm) j351im) (355rr.) P~Br;r) {JS6TI"") (35~nT)

('::tlftRU1Fl '""" m~ 270., 21U"' 21il~:} "'"' O:t\>cht Cu~"TI lt,do..Jt """' HJ'i7..1't

Tl'Iw<L~ UlbZi!t

;,37)

Ct!"!~•J&Ji~ :g<liln)

Bo beat. co m/Snowb lower

7!511 C!l5n C6.5n. l!~~l rrj 12!97r.r) (2117Tr•)

fMr< ,.,. j!i£l.TT) f'.&A!"'nJ

413n «4h (1U93rrr) (112frn)

"'" JL51t ;<fffiTT>) m&nn :arorn} 10\Dh 10.:.5b (~5311.)) (474~

2!tl 24·t 1E!!hn) !1;1!).-pj

lJ!t '" !35n !a51 (.1.57Tn) (457m) (47Qrr;) (qQrcr)

270"' '""" 27il1l;,;) "'"" H,mJc ft11?.ic tt,.r:vc d;(tl.J-C

~ltJJ.{lft l~tlt5tt lf1:14:ilt J12;.) 114r.) {!l.'r)

o~.3il 00H3n. 05J3i1 (13•1<12-rr) 113•1il1r.T) 11ldil2'T:-)

"" ' i # ~fj ~t 0 "' ~ '

1 l ~ ii;ia i¥! r• :17f _ 5

](SNOW BLADE . ·,( r~ ;~ •... ·.',.· .. I SNOW ACCESSORIES~~!~; COMPACT LOADER

OVE THE SNOW RIGHT WHERE YOU WANT IT.

The Bobcat' snow blade brings unrivaled speed to any light and moderate snow removal job. It angles 30 degrees to either side with the help of fingertip controls Inside the cab of your Bobcat loader. There's no need to !eave the cab -or even remove your hands from the controls- in order to move piles of snow from sidewalks, driveways, parking lots and more.

STAHDARD·DUTY SHOW BLADE The standard-duty soo11 blade has a trip ITI<lldboard that fo~ds ""'am prel'€flts damage to the attachment if it strikes obstacles su:h as marilo:e covers, curbs or rn!sed coocrete, preventing damage to the aHadvnent.

HEAVY·DUTY SNOW BLADE The heavy-duty snow blades offer five degrees of oscillation to either side to help maneuver the cutting edge when moving snow around drainage In parking lots and transitions from sidewalks to streets. It also features a trip edge. Because the snow blade stays upright, plowed snow remains in front of the blade.

MOLOBOARO Angles right or left up to 30 degrees. Trip mechanisms prevent damage from obstacles and surlace Jrregu!arities.

DEPTH SHOES Long-lasting and ad;ustable to stand up to virtuaEy any combination of snow and strface.

S:!h tU21mn 03~t6h

2ilh. (71tmn)

"" (15:'-l.nn}

03-h61n. (95ltalmm) (95l152mm) (95 ~ 152 r""'•)

1 2 2

ZJin. (711mT•)

1 3 h. (3lmT~ 131n(32mm) 1J!rq1211'm) 1.Jlrt(32mr-}

' ' '

OPTIONS ANO ACCESSORIES CUTlliiG EDGES: Hlgh·carbon steel romes standard w!Ut the snow blade; rubber and polyurethane are available for protecting sensitive surfaces.

END WING KITS:Avallable for select models, end wings make the snow blade more versatile, allowing it to be usedasasnowpusller.

Bobcat. com/Snow Blade

COMPACT LOADER

BOBCAT EQUIPMENT PROVIDES MORE BENEFITS FOR WINTER WORK. Beyond having more snow-removal attachments than any other manufacturer, a wide array of options allows you to take control over the elements and tailor your machine for the season.

FOR COMPLIANCE COMPLY WITH TilE REQUIREMENTS FOR YOUR JOBSITE:

• Operator trainfng kits

• Ughtingkits

FOR PERFORMANCE SAVE TIME AND LABOR ON EVERY JOB:

• High-flow hydrauffcs

• 2-Speed travel option

• Pmver Bob-Tochs mounting system

FOR COMFORT

• B!ock healer, engine oil heater and co~d start kit

• Tire chains to gain traction and control

STAY COMFORTABLE- AND FOCUSED ON DOING A GREAT JOB FOR YOUR CUSTOMERS:

• Enclosed cab, heat and airoomUioning

• Suspension seat

• AMIFM stereo

• Sele<:table Joystick Control (SJG) (ISO and "H" patterns)

• Advanced Control System (AGS) (hand ar<lloot COil!rols)

• Deluxe instrument panel (theft protection and keyless-start conv1lll'ence)

LEAR II MORE AD OUT CUSTOMIZIIIG YOUR EQU!PMEIIT: BO BCAT.CO M/CUSTOMLOAOER

Bobcat.com/AIIAttach -------

COLLECT AND PUSH SNOW

TO CLEAR BIG WINTER JOBSITES.

Tile open bottom and wlda body of the snow pusher deliver pure pushlfl{J power for maximum snow removal speed and efflclern:y, It brings more collecting and holding capability to the job, wh:ch means larger areas can be cleaned without stopping as often. Perfect for parking lots, driveways and building sites.

Moldboard l!otaUon and oscillation keep the snow pusllet In contact with the ground vnthout damaging equipment or property. This allows safe and efficient snow removal on decorative and sensitive surfaces such as paving stones. When operating on terrain that Isn't perfectly flat, anow the blade to float and follow ground contours to cct!ect more sooN. When p<t&nng through sooN on flat SU!Iaces, keep !he blade positlon fixed.

O~O'<torql'fdjtt '"'"""'" 12:56D . .tt5TO>:g)

Orer;,H'idtl(A} 1tl2fij1591nm) 11Blltlli1rrm)

:;:;";;'"'''' 9~611(2402rrrm) 1211n.(3CtiUrn-n)

5621rq141311'-:n} :62kl.{I4Z11um)

Hdiftt!O) 3701n (961mm) 37/JII1i961rn)

C!.1::ErlJhl/') l5dJil:Rd:r~ 15x8fn~

s~I:!St•.B 07h5!n.AR400 075~51n AA400

"" \'<:nbll 2.3h(S3m"l\) 2..31nt58rrm) Trl """ 12&.!,1 O·d;:;t'm .;t~5di] .;t~5d"<]

Ap~tov~d Muhlnet: S.Jd S•c.:rlo,.:,j,:r, D: n:uct Tr;,:~ UlJ·jn, A'l l',t.-~l S":crlrGi'r, f! rl lri~irod;:r Jc.:Jc:Jt~ UtHf\',\:;r( f.t.ffi'r~. \'.:r..;.HM,otme TTC

Bob c a I, c om/AI !AI Ia c h

PLOW THROUGH DEEP DRIFTS AND LARGE PILES OF SNOW The snow V-blade offers maximum versatlllty. With five blade conllguratlons, the sflO\V V·blade can be positioned multiple ways without ever leaving the cab.

• Scoop blade co\!ects and holds Sno'/1 for removal to another area. For final cleanup, pile It high, OPTIONS AND ACCESSORIES

• V-b!ade cuts an initial pathv.ray fast through deep, heavy or hard-packed snow.

• Angle blade quickly and easily moves snow to the left or right.

• Straight blade gives maximum width for piling snow banks and cleaning light snow cover.

FlOTATION KIT: Optional frrune flotation klt oscillates blade ±10 degrees to improve perfonnance on uneven terrain and follow the contour of the ground independ.entlyofthecarrier.

RUBBER CUTTING EDGE: Protects sensitive surfaces.

SPECIFICATIONS M.ii!M !t:-iQ1(N'l'lb!:ill!Xi:rc:k•<) ZJ51n(/24m-rr) JZ-Bh(8331!1JT\) 32_8)ot(8J3/ffi•) _, 40l•'lj!tl16mT4 47:lllllllill.r4lj 472hlfi2{f!lrm)

\'IGr•.n]l'ih'l"11tVtbd')

Swu'l,\::rimJWctb.(U~

\'{or•.lr;JI'i'dl"t!(;ingt)

Wom;f;'f!JITI~:ro&:"F'c5.tfT«n¢tl

O;n:IToJW:ifit

5-H1(1372mn) £451~ jlGlJmrr.) 751n (1905m11)

S3hj134£rm) 63o(l£00rrm}

62h(1575mm) 741,1 pr,r;omm)

S.H1f!172mm} fi4rl(l62ila>:nj

t6Dib.t29'!qJ) 7J3b(115>-g)

972':!;441'1!1 1(Jl3b{459-.g

±10 ilO

CREATE SMOOTH, GREEN LANDSCAPES ACCURATELY AND EFFICIENTLY. Whether laying sod is a normal part of lhe day-lo-day operation or just an occasional chore, the sod layer attachment makes quick and easy work of laying a fresh, green landscape. For highproduclion sod inslallation, the sod layer can carry and lay a roll of sod up to 4 feel wide. lis front-mounted maneuverabiliTy makes rr high~ effeclive on any jobsile, even !hose with space restrictions.

Bobca I. com/A I I A lfach

32Bin-(833rr:rr·) 32Bht(R331!1JT\)

4731Q\t2ill!<off>) 47.Jh!12fllmm)

855ht21nrrrn) 9Uii'l(243r1mm)

841n.f2t!4mm) 95hJ241.JITrnj

9-Jin (2~1illrmr•) 110in.(m4.r.n)

esn.rn"i9mm) ll5h!2413tm'.,)

ll24lbfi74k.J) BG31b.(J-94qJ)

J(l'5,'1tJ(..f7tl-4 1102h(9YJ%')

ilO ilO

:s> , , f , •""i ~ l, F ~:; ~ ; I $f; "*"' f" 10 :;1 - b ':f

)~< s 0 I L c 0 N 0 IT I 0 N E R M • ·,fLY \"• f k •• • :~ '.'. s 0 I L c 0 N 0 IT I 0 N E R O~:i COMPACT LOAOER

PREPARE THE LAND AND LAY A GOOD FOUNDATION

FOR GROWTH. The soil conditioner is a versatile, cost-effective attachment that no landscaping crew should be without. Its carbide-tipped teeth pulverize the soil. ripping through clumps. leveling the ground and filling In pits and holes. Rocl<s and other debris are windrowed to the edge of the jobsite for easy cleanup and removal.

• Cutswales

• Grade topsoil

• Level ground, smooth ruts, clear debris and till soil

• Prepare ground for seed,sodortrees

• Tear out sod

48~84tNCH AVAILADLE WIDTHS

Bo beat. com/So iiCond

CARBIDE· TIPPED TEETH Easily rip through hardpan and putverize clumps for maximum ground penetration. Individual teeth are replaceable for easy attachment mainteoaru:e.

DIRECT·DRIVE HYDRAULIC MOTOR Eliminates the need for sprockets and chains, resulting in a more durable product that requires minimal maintenance.

DRUM POSITIONING To level and grade a surface, lock the drum for a box blade effect. Or place tile dcumln the float position to follow the contours of the terrain and prepare the soil without leveling sculpted land.

FOAM·FILLEO TIRES Featured on the 72- and 84-inch h)<iraulic and high-ftcr.v models, foam-filled tires protect your productivity by eliminating flat tires on the Jobslte.

FRONT BOLSTER Designed with a wide stance, the front bolster pn:l'Jides enough room between the wheels and drum to let materia! in front of the drum, delivering better grade coolrol. Flip the bo!ster up to create extra room when transporting or for stornge.

Z.Hiln (7J31f!IT.j 3'H1!7Gl•m)

4Elhll161·nTJ} f.5ttj!&51m)

COhiPACI LOADER

INCREASED DRUM TORQUE Higll-flow models feature Increased drum torque for moving more dirt and grading more efficiently. Increased dnun torque Is especially beneficial when operating in rich solls.

INTEGRATED CONTROLS Hydraulic and h!gh-fiow models feature h~'draulic adjustment of ang!e and depth wntro!, which are easily cootrolled on the fly from t11e integrated controls Inside U1e cab.

OSCILLATING BOLSTER An oscillaiing bolster- standard oo 72-lnch and 84-ioch models- keeps the drum parallel to the ground to minimize the effect of bumps and potholes, resulting In a smoother finish In fewer passes. The oscillating bolster, combined with hydraulic depth and angie controls, also makes it easy to scu'pt the land or cut swffes for drnlnage.

REMOVABLE END PLATES When removable end plates are attached, soil In front of the drum Is carried along like a box blade and fills in low spots for an e\<en finish. Without, material is pushed to the side and can later be picked up with a bucket.

30h(161rm.j 2971n(755!Tb"ll)

6.Sh-{1li51mr<) &Si1j16511l"m) 71il,(lJli•W•) 76ni,2Hlrmj

256~\:ftcrri}l"t 25~'}l:'tcrrttt Z.'i~'l} t't(UftJt ZSC:gl:,'trr~}l"t 25(}-~ l:!tUM•:tt 251}:'}\:flar•;t;t

" m "' "' ,., w

(i)}tl!Zlq•.g.) 111011\')1)4\g) l110[l\'iD-.loJ?) 1110l.l[SIJ41.g) 1$lh(575>g) 1ZG':ltlt575o.g)

1013g:-.m 1337g:rn 1H7gm 25J7gm lll37qm :>n:i7q:m

l"n1;'!1{3>d ro·n·tl..l f<c-Jfihj k··-r'··l ln::<lli-~1 &"<h "" ltJJi?Jfc ll,<::r~·>.; h',.t""'d.lc h'tfr""'d!C

!IJJdfc lifT"-~ lftSafr 1/jhtlc

Bobc a I. co m/SoiiCo nd

Bo be a I. co m/Sp reader

HSB SPREADER HYDRAULIC CONTROL AND CONVENIEHCE The self-loading hopper on the HSB has an open top and can be used as a bucket, allovJlng an operator to efficiently fill the spreader from a pile rather than pour material Into the top. With a 9.6-cublc-foot hopper, the spread pattern Is controlled by a hydraul!c motor and three material flow gates that spread from 18 to 28 feet. The three Individual gates, located on the hopper, maintain the rate of material spread.

• Hopper grate fillers unwanted debris from spread material.

• Self-loading hopper can be used as a bucket, filllng the spreader from a plle. Quickly and efficiently reload the spreading material Into the hopper for large-coverage jobs.

• Hydraulic system contro!s spread pattern from 18 to 28 feet

OPTIONS AfiD ACCESSORIES SIDEWALK KIT: Keeps spreading material from being

cast out of U1e bounds of the sidewalk.

Oe<:G'rr']\\I:Jgt;t(•-n;t1) 3250 ~,.,, 31l71n[17B<q)

1-t.;g.'t 447S~(1tl5om) -«l9lrt(1039mm)

W.:ttl 4tl51n(1Z32rrm) 5-141il(13ii21TiT)

==·'I 7R5 h t1*1-l mr'J 32ill.j.1151111'l)

135ft'(332L) 9Bft't272l)

S.'1fCrl.l]f';tl>111 :i-liJtLf1.5122m) 111Zllt.;5687mJ SlC:o:.JCr;Tt~ V:wd:il:i~T££ild.:J(:ill;'-,J

'"' !Zwit!YJtfffl:lrlw-; """"' SJ',-;nn•Nllo>lD<l1"1<-tr 12btJIJ5mm) tai1(4571IT11)

lltn;!cltkE!t.l - lh<ol

AFprand Mach!au: 5<\:l St·E lin:lc1, Cnr.n.:t Troc~ lmXr . .1-!1 \',t<:d S'>Tl Lro&r, f{>·\:::;t~ 5(i(l0Ll,;~IW,,'~I.l.:di):J

Be be a I. com/ Spreader

SP12 SPREADER FOR TOOLCAT MACHINES Equip your utility work machine to spread sand and salt with the SP12 spreader attachment With a 13.5-cublc-foot hopper, the corrosioo-fre~ ai-poly unit mounts In the cargo box and can hold more material for larger spreading jobs. A dash-motmted spreader control aJ!ows you to adjust the auger and spinner speed to spread material from 5 to 40 feet from inslde the cab. Because the spreader mounts in the rear of the machine, you can use a front-mounted attachment such as a blade, blow-er or broom to clear snO'N before spreading.

• T1w dash-mOU!lled, variable-speed <iaJs provide ffldependent adjustment of the auger and spinner control directly from the operator's seal

• A mesh screen at the top of the hopper fillers large chunks of sand and salt for even, consistent flow.

• A three-stage baffle covers the auger and anows an operator to adjust the material f!O'.v to material granularity.

OPTIOtiS AtiO ACCESSORIES REAR SPREADER UGHT KIT: lncluct.s a tallfighl

mounted on the spreader that can be connected to the taillights of U1e Toolcat-· utility work machine.

; ' ' ! 1" """"" """ ~ ' t "'t % j :3'

I "" ""l!Ji! • ~. - , ,

~zit·· REAR STAB ILl Z E R . , ( ~~: .,, · ' , . __ ·• '·.. • · STUMP GRIN 0 E R ;jf~ COMPACT LOADER

Frame-mounted at the rear of the loader, the stabilizer transfers the weight of the loader to the backhoe or tree spade attachment, giving the attachment more force to power through the dig. Street pads protect sensitive surfaces from damage, and grouser bars help keep the loader from being pulled toward the work area. The rear stabilizer attachment also helps level and stabilize the loader on uneven terrain.

IMPROVE PERFORMANCE IN

ROUGH, ROCKY AND MUDDY CONDITIONS.

~Bobcat. F..:t<IO<o'I:O<'.:rd~"""-,..,.,.-.:J~,,-..c,c~or-~"' ,t;.:IL:.t> ... ~<-;>>nJ-h1o.'Uf10'tS-'*~••

Easy-to-install steel tracks provide better flotation and reduced ground pressure when operating in tough environments. They also improve traction when working in soft and !oose conditions. Compared to rubber tires, the steel tracks deliver better operating results and protect tires from wear and damage. After initial installation, steel tracks can be reinstalled in less than 30 minutes.

90-DEGREE ANGLE MOUNT Mounted at a 90-degrae angle to the operator, the stump grinder offers increased visibillty to the cutting area, giving the operator the same w!de view as with any pull-behind grinder.

AUXILIARY HYDRAULICS OPERATION Stump grinder operates off the carrier's auxiliary hydraulics, eliminating an engine to maintain while operating.

RUBBER·DEFLECTIHG SHIELDS Protect operators from wood chips.

CARBIDE-TIPPED TEETH Efficiently rip through hard \\'OOd, providing long life and uptime protection for the attachment.

UNIQUE VALVE DESIGN .Reduces the possibility of the cutting wheel stalling wh!le In the cul

if:J;OJCrt\',-j:ttl\A) 3'"i'llc.") 658"1:':/Hc") o.~-~lto-v~ ~li3\l t1175n."1] 45,.ql1-Umq

o.u::!lll:"t1~\B) XL'ilnta5tmrn) 594h(l50"lmn)

G;n:atrqi'k-'9't 401bt2\}li<Qi 9c1lb(445<gJ

\~tn:![i~To"t·:fl,fT<:(lf\ IIH~ (~57«•'•) 271n(GSGIHT)

COMPACT OA R

GRIND TREE STUMPS INTO

ULCH. companies, campus facilities, homeowners with acreage, municipalities and landscaping contractors, the stump grinder mounts directly to the front of a carrier for maneuverability in tight areas and easy positioning over the stump.

G5flllli1G71tr,n)

45hlll.t.31111'}

594h(l50"linn)

<;>6b\45l>;JI

:27ili6:Zhnn)

f'llS:C<tl 3l{i94\,>lllt.r\:riilt'J461-GJ.ru'<4lj 4-100 6.Ul!tf.r-.R{Uai IS9Jm!nhj JI!l :011ft!ml'ljl0!215'JJfl"!rri;\)

t;umtxrciTcrtn 1G

f.l.ltOJt;l}lti/i{tj lth(ll£1!:-mi

l.l.:HOitr']l":~ID)(:t.h~grcui) 11ht(279tTY'1)

l.tn:S:.TgA-'0' lfJ}:;!(CftW 1011crmil.3SJUcC")

Bo be a I. com/Grinder

"' 32 .12!nt,3Hmn) ~<tht!lt3trmj

15!n(lllrr•T) J5bl(3.l1mrn)

CD~_q &Jd:g

17-J2g:m(6-4-121U;r,'n) 2540~p"'1(95-1S1U.r>n)

=.;.=~·= . .Y<d>:L-o&dn:k-.!.<<r.,.-«,., o't>tl'<b.._t==t•=l>""I-HoJ\o=>·'*L .. o ~Bobcat.

0 • '

~"" 4. * *"' rr' "':, .· ,;; ,}2 S W EE PER 'f ~~ , ' . .·. · I SWEEPER Z3

COMPACT LOADER

SWEEP, COLLECT, DUMP DIRT AND OTHER DEBRIS WITH THE

SWEEPER ATTACHMENT. When operating this tough attachment, poly bristles sweep and deposit debris In the sweeper bucket. Simply dump the material when the bucket is full. There is no need for multiple cleanup attachments. Ideal for construction, Industrial and municipal jobs, the Bobcats sweeper maintains optimal bristle~ to-suliace contact and delivers e,asy-to-use efficiency. Clean park(ng lots, sidewalks, docks and warehouses. Scrape mud and other caked·on materials from roadways, driveways and other jobsites.

44~84 INCH AVAILABLE S\'JEEP \'/IOTHS

1---·----·-~

s.,..x~Wd;l 441n(1113mm)

0;f;0'{{dn .WJh!la7mn) 0p.::r;Y<;JW.:.{9",t 5.551.1(252•;))

Bu:.•E\Ca1i.dtf.l!r~'-d r.Gt!'jl.l19-n)

Buc.•.ctC:lnrtt.S.w:[il 53ft'(015m't

&oonL"Ir4'l"dsr 214h11544rrnJ

Brrc!~Mt,:::rial

flrt:qJ!itiJ lJ;-..... "IT]r,rn@159'"11 105 I'IJ>~Kl

G!.ltcrBn..on

NO NEED FOR MULTIPLE CLEANUP ATTACHMENTS REVERSIBLE GUTTING EDGE Cut through caked-on mud and materials with the replaceable bucket cutting edge.lt's reversible to last twice as long.

FORWARD AND REVERSE VERSATILITY Operate the sweeper attachment going In either forward or reverse. Sweep In reverse with the cutting edge on the ground to sweep material into the bucket with the rotating poly bristles, similar to a broom and dustpan. In the forward direction, lilt\ brtslles flick matenal forward against a rubber flap. From there, the male ria! goes over the top of the bristles and Is deposited Into the bucket

8-llrl(2.1J.Imm)

513mft481•"Ml) W21"1{1681tmn) 7321•1(19B.lmT>j ll')9!.t("lln4mtl', 650it1(295;:g) 75Sirl(J.I4•1,!) 8451J(333f~ 102flln(4GO•Q)

021t';OZlll\l llft';fl341fl] 144ft'ID41m") 1ll5ft'(D.51orr)

G6!t.'(019m') a4ft'(0.24m) 101ftl(029m") t18ft'l0.33m)

Z1.4!n(54-h·fflj ;!14bt:544nm) 214l"""<!544nm) 24h(61Ul'l'm}

Rcl>!:Ji:c.Do.JfD'ii'"Df'/"fCS'•:r.:m(~£iltMDlS1l"i.A'~.-)

j\e;:m---~!e&u-4

165 215 "' 215 O:Jt.l.l:l.<l

0-ta.W O;:t.'-'"i:!J O"llk!ml

Bobcat.com/Sweeper

Sweeps and collects traveling forward

GUTTER BRUSII

WHEEL KIT

So be a I, com/Sweeper

Sweeps and collects traveling in reverse

OPTIONS AHD ACCESSORIES

Dumps material

GUTTER BRUSH: Cleans curbs, alongside buildings and other )lard-to-reach areas. Widens the sweeper's total width by one foot to allow more coverage per pass. Can be raised and stored vertically when notln use.

WHEEL KIT: Available as an option for the 84-inch sweeper attachment, the wheel kit protects surfaces such as concrete, cobblestone and asphalt from scrapes and scratches by suspending the cutting edge of the sweeper during forward travel. Two mounted caster wheels are Included in the kit.

BRISTlES: ld?al for aU t~v:eeping contfltions, poly bnstles ptmide llelter ftichin~ 2ttion for effective debris removal. Steel bristle and combo bristle (poly and steel) sections are also avai!ab!e for stubborn debris.

WATER KIT: Keeps dust and debris under control when operating In tough env·ronments, with jet nozzles spray;ng water evenly across a surface.

~ ~ jl • 4% '¥~ ~:-l~ ~ .' - ~:- ;/~_

y"~t: 3-POINT ADAPTER ~ . 'r r~ .,, * ••.. >/,'_-.I TILLER Ei!~ COIIPAC!lOADER

USE CATEGORY I AND II IMPLEMENTS WITH BOBCAT LOADERS AND WORK MACHINES. The 3-polnt adapter adds evan more versatility to your Bobcat)) machine, enabling it to usa category I and II implements that meet the ASABE standard for 3-point hltches. 1 Bob-Tachs mounting system for quick-mounting

I Adjustable top link for added versatility

I 2-inch receiver for tO',•Iing trailers

COMMON INDUSTRY INTERFACE ADDED VERSATILITY FDR YOUR MINI TRACK LOADER

BOBCAT' MINI TRACK LOADERS' CAN BE EQUIPPED WITH EITHER THE EXCLUSIVE BOB·TACH' ATTACHMENT MOUNTING SYSTEM OR THE COMMON INDUSTRY INTERFACE (CII).

• The Bob-Tach mounting system delivers rapid attachment changes and superior attachment fitment.

• The Cll pin-on design allows you to pair mini track loaders with many attachments you already own.

BOBCAT ATTACHMENTS WITH THE Cll INTERFACE IIICLUOE: 1 Auger 1 Buckets:

36 or 44 inches

• Hydrau!!c breaker

• Pallet fork

• Trencher

Oxm-•ngl'/cqt

l.i:flP'i

2721Jt12J•.gl

14h:;\".SIJIT·)

4GI\t11C.lmr)

29ht7J7rrrr) IHjt '.'au·l3t·J!To::rltl":nilfdet"r9TI'!;:,U CY•9:r H3f'o"rtf!>,.hatl:t11To.r-.'.s

Ap~IQH~ lb•h!ns; S•~j Sti~l..rod-:f. (DlT"Il.:tTra.c<~. f-,1 l'ol"~S>;;..,r l.oakl r,-..o\;ol!~lt<!t(l\"c)("<lho .. tir>:'

OUR BRAND FITS YOUR BRAND. Put Bobcat attachments to work -no matter what brand of loader you operate.

Just because it has the Bobcat brand doesn't mean you can't try It on for size. Did you know that many Bobcat attachments fit a variety olloader brands? Tllat means you can expand ~~ur versatl!ity with attachment choices from the world's leading altactroent manufacltnr, even If you <bn't ham a Bobcat loader.

WHAT'S YOUR JOB? Check out hard-working Bobcat attachments for.

• landscaping

• Construction

• Demolition and recycling

• Concrete and flatwork

• Aglictll1Lire aoo t91bJs'ness

Bohcat.com/AIIAIIach

BREAK NEW GROUND. Tear through clumps and hardened materials with the replaceable, double~edged tines of the tiller attachment. Till and mix the soil with compost materials to prepare the ground.

BI·OIRECTIOHAL ROTATION At'rms for top-cutting and under-cutting when operating in either direction, maximizing attachment versatility and increasing operating capabilities.

OFFSET MOUNTING Enables tilling next to sldev..a.lks, ci.Hbs and buildings, increasing jobslte capabilities.

OPTIONAL ADJUSTABLE SKID SHOES Deliver depth control for more precise tilling operation. Can be set to 2~, 4- or 6-inch depths.

• Tear through clumps and loosen soil

• Mix compost, fertilizer, manure and mulch into the soil

• Add amendments to 110\'ler beds

• Prepare land for planting

• Remove weeds between rows

• Till next to sidewalks, curbs and buildings

\'.\.6,\,J\Vo.l"tl(A) 7S4h(1915mn) (MrdWd:htB) 46h.(l2HJIITI1) 71h(f.)))!T~ 845h(.!UGun)

'""' " "' 41 L'<l..::WJohJ~ 6il(t52.n;-.J 6tn(l52!rrr) 6h{I211"W}

~P,J-..c:tim ~l,.t:tord e1rJ-Jti_,;;J E'<·li:t::or\!1

Dr~.'.l f:_i:-tU D";;:tt Vr<>::t Tr3.~![!;-n""t(f1 fo:r,•,:;rd•"P""'"''.: N.r;,"'1i'f',;o,<:cr:<l Ftro\::rdlf}..-,~

O.ua.'Jg\';o.J;t;t 475b.{215<l}\ fOOhtlro"<l 74311 (3-ID~Jl

Rw&-1}~ 9·13g;::.•T! 1HOcr.m 17-.mgun

H€-SUrn'n.) 64-\Stlt,rh) (64·15\U.T,il.)

AJptaud Maehlnn:S·:..iSu~ru~. WT~EI..1 Troo:<.Lc~>.r. A~ \'ot>..-;-1 S',.or ~. ~lrl Tl"3<~~loadcr, Too\".->!~lJtft(I'AHI,\J,..hiP.

Bobcat. com/AIIAtta ch

REPLACEABLE TIHES Hardened for maximum soil penetration, the doub.1e-edga tines break through Clumps and tear through materials to deliver loosened so!! for preparing the ground.

DIRECT·DRIVE HYDRAULIC MOTOR Delivers necessary operating power while reducing overall maintenance costs, extending the life of the attachment and eliminating the need for high-wear items such as gear boxes, chains, sprockets and shear pins.

COMPACT OADER

DIG AND TRANSPLANT

TREES WITH SPEED AND PROFICIENCY. The rugged, dependable lree spade aUachmenl turns any loader into a transplanting unl1, while also speeding up produclion and culling labor cosls. Wilh ns compacl, short lower design, lhe tree spade easily squeezes between closely planled lrees. Buill for maximum durability, lhe reinforced allachmenl frame handles lhe bumps and bruises of a tough work environment. The tree spade works in a variety of soil conditions, maximizing worksrte capabilities.

DELUXE INSTRUMENT PANEL CONTROL Monitor active blades and gates, change auto- and easy-dig settings, and monitor the number of trees you dig In a day with the optional deluxe Instrument panel.

~Bobcat. R:r"''"''""-'<r4:...±-,.,-<Jrr,.,._~,rl::r-~·"' \b!kllcaU..mloomF>t't'f.W3/t>,..,.,.o..d-""o

REAR STABIUZERS Rear stab!lizers are recommended when using the tree spade on approved Bobcata loaders. Stabilizers transfer the vroi9ht to the tree spade for maximum digging. This allows the operator lo dig in Iough soli.

CONTROL OPTIONS A convertible valve option controls tree spade operation with fingertip controls on the steering levers or by using a pendant control box on other manufacturers' machines.

ADJUSTABLE LEGS Allow for d!gglng five different root·ban slzes with one tree spade.

BOBCAT ORANGE COLOR Delivers better attachment visibility when digging,

COMPACT DESIGN Allows for attachment operation !n confined areas without damaging the landscape.

Bo beat. com/TreeSp ad e

Three·Biade Dimensions

Four·Biade Dimensions

CONVERTIBLE VALVE Allows for operation with Bobcats loaders as wen as other brands.

EASY ACCESS STEP Design of the frame allows for easy access to the loader.

OPEN FRAME DESIGN Provides excellent visibility to the base of the tree.

OVERLAPPING BLADES Ensure clean root cutting and support of the root ball.

Bob c a I. com/TreeSpa de

BLADE CONFIGURATIONS Most tree spade models are available In modified and cone blade configurations. Select the right tree spade attactunent for your specific machine and application.

MODIFIED BLADE: Has a lower angle of 25 degrees, allowing the tree spade to plru:;e the removed tree directly Into a basket. It's the most popular choice for balled~andburlapped tree harvesting, and It's excellent for loamy to sandy soils.

l CONE BLADE: Is popular for transporting and

I placing trees In sandy and hard-packed so!ls. It can also be used to place trees in baskets.

,,U1'1LfdEtui:$

Et:doJoi>fctAl

~~=j(j~

l~n:9~ &ttmOeffi"'IJP.'ldus

~\'mi

t,L-'RXrtW:B:s

l;h:bAtq\ct.lo)

\Ydlt!(B!

lf.Jg1'1((J

I~''' EcltillnO;-:;ingp;:;.ctu;

~Vk:.P

f,t.Zfl'J<'IL~£1ad3

Ea},Ar.;!!JIA)

Wdltl(Bj

HdgH1CJ L!:!fo;'n(O)

IArt!}gj119Dq::t1

B:TittnOcrrL'1f!P.:!dm

Sjmn.'!!1t

1 /.!.!UiJiH,!!H* 3

Zl&.g 7Bh(1'!JOrrrr)

5a7h(1491m;;) 742h(19J0m)

25i!ift(&:t'>F.41)

561n(142rrrr,)

15251:!;£917oJ1\

3

:aidn;J 791Hl(2iJZ7mmj

SilJll \14:91fllT!) 7ll.4h(1991m11)

294n(7.f7mrr-J

62kq157mm)

15&Jb:i11ii7<Y!

25d<:l}

77711(1974mm)

fitfiin(1WZmT•) 7ll5111(19'Mmm)

;11~lTd7mm)

941nt2391n1l)

21451.l,ID'3·~

""'""'"""-"crtddor-O<rd•l.d<.-""'""'"-~"' """a,~ .. l....,,...<_p.,...Wol!o=•·*"'"

""" 91Bin(2332rrrn)

64:2bjla:l1nr-J 83.Jlrtt211Gm-r') 3121:q7e2a:m) O.Oh(b:lrnm)

!SOOIJ{72t21TJ)

.5\Jd~

951lhiz.I.Zirrm)

G42hfl6311llT1 117.5lrt(2l.2Jmm)

:i2.Sh(B3iir-.-rj 2.21.\(5-fim,nj

1M1bf743.fl\W

"'"" &511r;(21G2m11)

6421ntlfi1)1Tl/l)

f.t511n(21G21Tm)

J331n(B.I!lmrr-) 501.1-(1-llmn)

2150b.{9751q):)

~Bobcat.

~- j t ',.;-I l' =, N

~za~~ TRENCHER c • 'f} ,., ~ ~ ,~."" .. ~',.1,.,<::. :li TRENCHER~~:~~ COI!PACI LOADER

CUT A TRENCH IN DEMANDING

SOIL CONDITIONS. The Bobcat' trencher creates trenches fast -even when working in hard, rocky soil. Teeth and chain options give you more versatility, enabling you to maximize trenching capabilities for soil conditions.

2-3 FOOT 3-5 FOOT DIG DEPTH DIG DEPTH

3-5 FOOT DIG OEPTil

LIGHT TO MEDIUM JOBS: MEDIUM· TO HEAVY·DUTY JOBS: HEAVY·DUTY JOBS: The LT112, LT113 and LT213 doiver 2- to 3-foot dig depths.

So.P.-SrJi Maul{ffi-9',ft

""'" 17hi~:2rrrr.J ~w-k~"'d!td,.\11<)

;.U:j'f

(]d,,ftffi.:r,rq Gm:<:•::cf,te:b

Wn0"Jtl:nl/. • ..,h1~ l.'u':~""

013ht21<l>w

4-Sfrl. (102203rr,,r,j

Fb:iPJ<Y- 915g_;n (:J.I57lfrrb)

3(W:EI

O~'.nlf'r'".:ure (2Cot.~l9<l)

G,naJll..Ytp!W f-)7h fl$.Rrrn<)

S'.:11i:r;J&:(m :i.'lHt l.m1tltBJ (10JDrnn)

l.il}O:.-r"i!:l z4m ({lt'rqn:stC) {ti'I<J•nn)

fr:orc\YG:ltUJ

SC:-e-Sh:'!lu.>J{!:j

ffi?sC\ouraxe(f}

The LT313 provides a 3- to 4-foot depth, and the lT414 delivers a 4- to 5-foot dig depth for optimal utility installation pertormance.

The LT405 de~vers a 3- to 5-foot d'g depth and high-flow performance capabilities to harness the additional horsepower of machines equipped with high-flow hydrauucs.

M3"llllr:.:P.-!Nt P.t:.-WDY.-9'dl' '·''"'-wl""~j",ft' H;.tr-a.fc f•~tl"~:i H;.H/.>;Sili-j"jft I! thule &E-~~:'1

Hn:~lrm-) Hn{-l?~n;l} 2ht51r-o74 2i:l.\51mr-1 2h.{51 rrrr~ 2h!S1rr•<1 2J'l(SIIn7)

121rli3D5rrm) d;J.T'ITiflkJ

G:"c-a:'-'~lykd:J G-r>E-Jl)~ c;--~,Jcyh].:r (;;:meqi.Yt..r fro:&'cr~ro:r Gr--on:t:rq1r~:t Gn:::a!t'j1rd-::t

l.'u~d~ !.'u~~'>! ~'u":p'B I.'V:-W. MJ:>.c\! ),',,~'"""' 1.\ .. i':<T~

liVlh!2&9-.gj 725h(:G<,q) \l'Ob~l:O)..q) 9'llll{4~<>;1 ltalh(r,;?Q~ 1l131l\WIQ) 15alh(f.'-;'l~

"" "" 612h 6-llln. "" G-12.1il (1CQ20Jrrm-,) (102203rmi) {152305rrm) (152-305rrn-.) (152-:.'o)Srrm) (IS220Jm,-n) (152:mmn)

915q:m 1H8g;n 1523gon l5Z3g-..n 264'1g-.n 3i ~Og:m """"' (3-l57lfrrh) {-1-ll¥.-llfml"LJ (5151\.oiTh) (SJH7Unh) t"-HSil.lrrL\j t4..1151V.nh) t'-"'l151Urrin) 3Q)(jfFJ 3-}IJ{)fl:;l 3:3Qol3.i ""'"" 3-.))J>El 33i)1]::E! 3JI)Jfl:i

(~OGS4 <Fa) (ll7501<.Pa) (lliY.I<Fa) (ll750~Pa) tmso;.PaJ t22751.l<J'a) (lllY.I'-Pa)

"" 74h 79.5h &l5h "" ''"" IC<53h. !IW./.J<rm) ('IMOmr.) tKll!lrrm) (ll7JmT~ {2<:Ui<rm) (<_tJ.t2:onn) (L\.~7rnnJ

52.51n SLSh 555h liSSh "" (133-llroT<) (llJ4 ITTIT~ 11~10mn) t1W4mn) !1Ei51r--"r.) (2DJ7mn) :!.01;). :!Gh >Sh 46n SOh "" ~15rrrr1 t915mrij t"915m) !1219.rm) {tmJillT'1 (l575m-4

~j)fn "" 513irl 5631n. ~-BJh 6511 \l~llm.TI) (1~l2mT) (l~llrr,,T,) 11~29nn) (Hlilrrrn) (1G51m.n)

23.1i"l 23Jll 2J.1h 21JJin 21.3h 2iih ['lm'rm) (5-97!Trr~ 15&mt>} l,55fmT•) (554.:-m) {E«!!IlT•)

2~ 'Z71rl 2~ Zlh. Zl42114h 23~264h \9\l (3514Dtmr,) (fi\06GGrr,r.) (GIOG-%mrn) (59--IGltrnm) (Oil4fJ7\nn) (~EOmm)

A,prand Ma•hlnu: S·.'-d S!;:tilr~C!d?, G.:owll:t Tra:<lo..><.:h, A'! I',~JS•,;-crlwJ,r,lhll Tra::1lr~f, ~'.;<i E.•.:.>,-.;t•f, Tt•A:-af U1lf\',~IT'~ 1,1,o._t;r.o

Bobcat. com/Tre n char

AUGER The large-diameter auger moves material from the side of the trench and limits the spoil that falls back into the trench.

COMPACT FRAME AND EASY TRANSPORTATION LT112 -LT414 are narrow enough to fit Into a pickup box.

GREASE CYLINDER TENSIONING Adjusting the chain to the proper tension is fast and easy.

SIDE·SNIFT VERSATILITY A manual or hydraulic side-shift feature (depending an the model) allows you to dig close to buildings, fences and other jobsite obstacles.

COMPACT LOADER

OPTIDIIS A flO ACCESSORIES SIIIGLE STAIIDARD CUP CHAIII: Features CUjJped teeth on rNery other section to e~tcel at light and moderate d:gging In d rt, clay and loamy soils.

DOUBlE STANDARD CUP CHAfll: Cupped teeth are mounted on every station for the best productivity in very muddy soils and loose sand.

CUP AflD CARBIDE CHAIN: Alternating cup teeth and carbide bullet Ieeth in a double standard pattern provide the best perfonnance in very hard soils, frozen grOWld and fracturable rock.

SHARK/CUP TEETH: This combination of cup teetl1 and shark teeth worKs best in hard soils, fracturab!e rock and grotmd \',ith rocky soiL

WHEN THE DIGGING IS DONE,

Bobcat.com/AIIAt Ia ch

FINISH THE JOB. Th's attachment is Ideal for locations such as backyards, golf courses and parks. It finishes off any trenching job, working to power down and compress the soli for a neatly packed trench. The large, wheel-type compactor compresses soli down in the trench, using a vibratory shaker box for opUmum compaction in any soli type. To ensure proper rpm, the vibratory shaker box features a bu!lt-!n flow regulator,

O:>.rd:n;~\',"'f!t. \..:l})hj&:l5\'l)

"'"" 57h('1tlar.rt)

l"'jjt 5.9h(1~9'lmTl)

\'{at! 48i'qll19r-m} wt-~t~;~l>~T •. t=r 4G51n(1181rrn)

'i'M•:h'lD-';:_(h 271l.~'l:U=·)

\)l;(<]'q\'(•.'11 45681rl. &=,-u,rop.u (114-171rror-) W«qq'lfltll WIO:lh \~'li•P'..d tma:nm) o1mTil:F«o::l 70L"'h(3175<-g)

VIL...l't:rniU'I.h!z :liDJatsqJ'll

AJ1ron~ Naeh1nes; s~·J S!~):f L£,.:,j,;r, f(,·ro:r::tlra.::~Wl-:t.r.:.:J\',roo<s•c,;rlf<)j.f

Handle bund!ed matelial, loose straw, manure and other hard-tograb materials with the Bobcat" utility fOil<. Strong, replaceable, tapered teeth easlly and efftdently handle a vanety of fann chores. Use the exclusive Bob-Tach~ mounting system to quickly secure the utility fori< to the canier.

REPLACEABLE TEETH Utifrty fork teeth are rep!aceabla for easy attachment maintenan::e, providing great pertormance, long attachment life and maximum productivity, Teeth are forged to provide strength with minimal weight. Add additional teeth to narrow the space between fork tines.

MATERIALS FASTER.

OPTIONS AND ACCESSORIES UTILITY GRAPPLE: For added versaUII!y, pair 1110 utility fork with the utlllly grapple and sink into hard·to-handle materials. Scrape, lift and move loose materials such as manure, bedding and hay. Or get a grip on hard-to-grab loads su<:h as posts and fencing.

Bobcat.com/UFork

COMPACT LOAOE8

PLOW IN AND WORK BELOW THE GROUND. " w~; /fiiiJ!?Jin

~~ !1 =.*' ~ ·~/~ . II

....... ..- ~

&

Designed for mini track loaders, the vibratory plow attachment Is the Ideal tool for installing pipe and cable with minimal ground disturbance. Dig dovm with the adjustable plow blade: A coulter wheel cuts sod Immediately ahead of the plow blade while the pressure foof to/ds existing sod dov.n and protects the surrounding area as the blade moves up and down. The result Is a knifelike slit that almost disappears as the machine drives over the cut.

HARD PACK THE GROUND IN FORWARD OR REVERSE.

tJr_.;L:tn:;~'i'«tft

Hcigtlt

V/11::1 -lt,dr<llfcHm!b!l].'

l,\.u_ft1UrW'cfW::iiJ'tl

61Bb'i (15245711TI1)

~lh;;2.3.'>9Jm

3111n (7!i0mm)

:Jfin (914am}

3!Hlln ('flJ)mT1)

1014jP1l j1)J0poi

ApprcvedMathlae:l.'r,lTne-~lrQ.Jd

ISOLATION MOUNTING SYSTEM Reduces vibration transferred to the operator, meaning less operator fatigue and more comfortable working conditions. It also affords more c:onslstent pressure to the ground, delivering constant compacting results.

SMOOTH DRUM Provides excellent performance for sand, pea rock, gravel and asphalt patching.

PADDED DRUM

The vibrating action of lhe roller allows the base material to realign and compact from the bottom up. A hydraulic motor drives a centrifugal weight on the drum shaft that provides the compacting action. This agile attachment is ideal for site preparation operations, landscaping contractors and paving operations.

Compacts heavy soils, clay and clay-based backfill.

B!·D!RECTIONAL OPERATION Duat-d·rection vibration motor permits compaction while traveling In either d:rection.

DRUM OSCILLATION Free drum oscillation keeps more of the drum in contact with the surfru::e on lBleven terrain.

O!L·BATH BEARING Designed to avoid cosily downtime, the on-bath bearings eliminate the need for dally greasing.

Do bca t. com/ All AI Ia ch

Dnrrn\YO"tl(Aj

fr'MJ11Wat1!1:!1

r,,w.;!Q.jiSU~

T>t>:Stll

[);un(Ji~;;

Pilid Srrt.o.rtn

~SIR iUUI, liOIN

4Bh.(1219m11) 73!n.[l<i54rr.T1) B01n(2:0Jlrrn)

W511{15:ill7m'l1) ~h(2DC06f!"iil'l} bfilrljZ!344roT}

Coll::;,:d CC{1~1td

12h(llllfhrwr~ f!ilhjl032m:ti) •.:,t.}:)~ tM!?kai;:;

254fi{645olT) <:54iJ!ti45mr) 26h(f£0m-n) 2tlln.(Ei60!T""T1) 2Bin.[6601G'l)

1ll "" ..t.12dtg J.7.5I.BJ ..t.75~

" 0 J ~ :"'il l, :~:~:0: k "" l ~ ~ iff $' ~; :;_ fu,, p ~ ""'

),~ WATER KIT _ ' 1~ 1,WHEEL SAW - , .- :, '·'I' UTV ATTACHMENTS ~)~A~ COI!PACTlOAOER

KEEP DUST, DIRT AND DEBRIS

UNDER CONTROL. When wotidng in residential and wban areas, use the water kit attachment to control dust levels on the jobsite, It is a perfect complement to the angle broom, sweeper, planer and vibratory roller attachments. Its high-capacity tank volume minimizes refilling, meaning longer operating time with the attachment. Control water pump operation with the on/off switch, conveniently located in the carrier cab.

CUT THROUGH ASPHALT, CONCRETE, FROZEN GROUND AND WIRE MESH. cut treoclles fo< Installing water, gas, electrical, utility and fiber-optic cable lines, or prepare pavement for repairs. Pmvered by the carrier's hlgiH!mtJ hydraulics, the wheel saw cuts through asphalt, concrete and other materials to produce a perfect tren<h for installing utility lines. The hydraulic depth adjustment gauge detvers a C:OOS:stent, uniform cut depUt For operating c'use to curbs and walls, the hydraulic sid!Hhift allows the attadunent to shift flush wiU1 any nearby object for a close cut

\(},,;Q'!Wdtl 6.151rl(174Clmm) £35h(\740mm) I I

IJ,o:dl.a--.;:'t! 74BhtB::ilmr~ Ri9h (2130am) (},m:JI-t'tt G5lrl{1651Jr-or.) 761'L(\gJ0mrr·J

~~ .... ';,;ift(t;.';} l'"s-,o·u~ I 1\':tW;;nft'fn:.h~ 'L'Ti7b(711"!} =""'"' ~~ llfrd(cSW-S••ft 2561rl (6~-0mm) 2561\ (G50mm)

tt,d'at.:th~l\4ro.f 254llg:.nt95151tf.r•nt 23MJro-rJ~S5151th•h}

~?o.tinJO~,, li·lan (!JN~Tr;n) 8-~~-tt (;t!J-iil<Jrrn)

BOBCAT POWERS YOUR VERSATILITY. Whether you own a loader, excavator, te!ehandler or utility work machine, your Bobcat9 machine Is a versatile too! carrier that's fully equipped to run numerous job-matched attachments. Bullt for attachment performance, Bobcat equipment Includes unique features that make ~'OU more productive. Standard and hlgiHiow h}'draul!cs, dual-direction detent, fingertip auxlllary controls, l10rsep0\'ler management- and more- help you use more attachments more efficiently so ~'QU get the job done faster and easier.

WIIAT'S YOUR JOB? Check out hard-working Bobcat aUachmenls for. • landscaping

Construction • Demolition and recycling • Grourxfs maintenance

Concrete and flatwork • Agricu!!ure and agribusiness

Bo beat. com/A II Attach

LET YOUR UTILITY VEHICLE DO THE HARD PART:

B BCAT UTILITY VEHICLE ATTACHMENTS.

You can do the work from your seat with the Bobcat• 3650 utility vehicle. Just hook up one of the variety of Bobcat-built, PTO-driven attachments with your Multi-Attachment X-Change~ (M.A.X.) system. Independent engine throttle allows you to separately control engine speed and travel speed for maximum torque while moving at low speeds.

Bobcat. c om/AIIA!ta cit

ANGLE BROOM Sweep a clean path through dirt, debris and snow with this low-maintenance attachment.

• Front~mounted PTO attachment for 3650

• Working width: 70 ln.

• Hydraulically angles 25 degrees left or right

BUCKET load, carry, grade and dig materials with this high-capacity, high·slrenglh bucket.

• Non-PTO attachment for 3650

• Overall width: 62.2 in.

• ISO heaped capacity: 4.7 cu. ft.

:; I ~ ArJ 0J\.' :;*'ifi ;. -

ba UTV ATTACHMENTS '( 1;, ., • ••• • • I UTV ATTACHMENTS ~!5:

GRAPPLE The utility grapple offers the additional holding ability necessary to bite down on even the loosest materials.


• Attached to 62~1n. utility vehicle bucket

• Overall width: 42.5 ln.

LAHDPLAHE Working in either forward or reverse, the landplane makes it easy to break up hard ground and level a surface.

• Noo-PTO attachment for 3650

• Overall width: 62 ln.

• Can be used like a bucket to transport material

MOWER Change rough terrain to a smooth, clean-cut landscape. Blades travel at 18,770 feet per minute.

• Front-mounted PTO attachment for 3650

• Cutting width: 66ln.

• Cutting height range: 2 to 4.5 ln.

PALLET FORK Move pa!lets and materials quickly and easily. The 36-lnch tines can be manually positioned to fit the pallet and materials.


• Overall width: 381n.

• lift capacity: 450 lb.

SHOW BLADE Clear snow In winter or do Hght grading In warmer months. Hydraul!cally angles 30 degrees left or right.

• 69·\n.-wlde attachment for 3650 (orange)

• Torsion spring trip moldboard minimizes Impact damage

• 72-lnAvide snow piO'N kit aval!able for 3600 (not shmom)

Bo beat. com/AliA t Ia ell

UTiliTY VEHIClES

SHOW V·BLADE Easily pushes piles of snow, plows through deep drifts and delivers Impressive snow removal power.

• Non·PTO attachment for 3650

• Five blade configurations (V¥blade, scoop, straight or angled, left and right)

• Overall width: 67.81n.

SNOWBLOWER Throw and blow snow to clear a clean path. A large, 12-lnch-diameter auger provides generous capacity for deep snow removal.

• Front-mounted PTO attachment for 3650

• Cutting width: 621n.

• Cutting height: 21 ln.

SPREADER Quickly and evenly spread sand and salt for winter maintenance.

• Fits Into the cargo box of utility vehicles

• Adjustable spreading pattern of 5 to 38ft.

• Control the speed of the auger and spinner from Inside the cab

- , . I . ' '

~ ~8 ', SA FE T Y & TRAIN IN G ' '( 1~ r, "

TRAIN NO Productivity and safety are always a top priority with equipment owners, especially when new operators are on the job. These step-by-step courses introduce operators to the basics of machine and attachment operation, as well as service and safety.

~Bobcat. li:> ,;..:.'""-N ~d-.~ .,.,Jin,-<-r-I• cb-,-y, ''-"'k~ .. ~.,..,....,._.,,.,_.,.,....._O( . ., ••

AND MAKE SAFETY PART OF THE PICTURE.

ATTACHMENT TRAINING RESOURCES for the backhoe, planer and forestry cutter attachments are avallab!e at your Bobcat dealer- or purchase online at BOBCAT.COM/SAFETY

, . IRON.· TI.RE oil liRE.,IR,ON; ". -~~:: .....

:CHOOSE WISELY.

While it's true that any lire will take you from point A to point B (for a while), only genuine Bobcata tires provide the absolute best

durability and guaranteed performance with your Bobcat machine.

t For more on the benefits of Bobcat !ires, and to view the new online parts catalog: Bobcal.com/WSTires

On8 rouuhAnlmal

HAMILTON EQUIPMENT COMPANY8801 HIGHWAY 6

LINCOLN, NEBRASKA 6850(7

(402) 464-6381 FAX: (40|2) 464J-5989

WWW.HAMILTONEQUIPlVlENTC30.COM

Attachment A

April 26, 2019 (Revised)

City of Lincoln / Lancaster County

Proposal for Compact Excavator &|

Bobcat E50 Excavator

• Equipped as per page 2• 250 hr. usage

» Same attributes apply as other machines bid in 19j

Annual Lease Price E50Annual Lease Price PC34 Plate Compactor (Page 3)..Annual Lease Price NB160 Breaker (Page 4).

Buck ts Annual Lease

088

$5,000.00$1,750.00$2,250.00

If you have any questions please give me a call.

Thank you,

Brian MotschenbacherSales Manager

^ Bobcat Product Quotation,ibn Number; NEW

26,2019QuotatDate: /i)pril;

Ship to Bobcat Dealer Bill To

City of Lincoln / Lancaster CountySharon Mulder

Bobcat of Lincoln, Lincbln, NE8801 HWY 6LINCOLN NE 68507Phone: (402) 464-6381Fax: (402) 464-5989

Contact; Brian MotschiPhone: 402-464-6381Fax: 402-464-5989E Mail:brian@hamiltonequipn

nbache

entco.ci ?m

Description

E50 T4 Bobcat Compact Excavator49.8 HP Tier 4Auto IdleAuto-ShiftAuxiliary Hydraulics, Selectable Flow with Boom MountedFlush Face Quick CouplersCab Forward Standard DisplayCanopyIncludes: Cup Holder, Retractable Seat Belt, Suspension Seat

with High BackRoll Over Protective Structure (ROPS)- Meets Requirementsof ISO 12117-2; 2008Tip Over Protective Structure (TOPS) - Meets Requirementsof ISO 12117:2000Control Console Locks

Control Pattern Selector Valve (ISO/STD)Dozer Blade with Float

P63 Performance PackageLong ArmClamp

C42 Comfort PackageEnclosed Cab with HVACCloth Suspension Seat

Telematics US24" MX4 XCHG TEETH36" MX4 XCHG TEETH (Revised)

Total of Items QuotedDealer P.D.I.

Freight ChargesDealer Assembly ChargesQuote Total - US dollars

Notes; Annual Lease Pricing is for 250 Hrs. of Usage

PartM3210

^ginc/Hyi

0 Qty1

Price Ea Total

Iraulic Monitor with Shutdown^ngertip /(uxiliary Hydraulic Control;^ngertip E|oom Swing Control l

Hbi-n

HIydraulicRiibber Tn

|,vo-SpeecVjandalism

fork Ligh-Change

arranty:

'oystick Controls

icki Travel (with Auto-Shift)Protection

Attachment Mounting System)years, or 2000 hours whichever occurs first

M3219]

;cond Ai<Hydraulic

M32t9|

[otion Trijadio

M321^

7311^

P06-P63 [

tiliary HydraulicsX-Change

P07-C42

vel Alarm

1

R51-C02

687322(188

$5,000.00

All prices subject to change without prior notice or obligation, T]his price luote supersedes all preceding price quotes

^ Bobcat Procluct Quotationibn Number; NEW^p.ril26,2019

QuotutDate;

Ship to Bobcat Dealer Bill To

City of Lincoln / Lancaster CountyBobcat of Lincoln, Llncjoln, NE8801 HWY 6LINCOLN NE 68507Phone:(402)464-6381Fax: (402) 464-5989

Contact: Brian Motsch^Phone: 402-464-6381Fax: 402-464-5989E Mail:brian@hamiltonequipntienti

nbachej

;co,o m

DescriptionPCF34 Plate Compactor (PCF34)

X-Change Mounting Cap - HB680/NB 140 andPCF34 plate compactorPC Hose Kit, Long Arm

Total of Items QuotedDealer P.D.l,


Notes:

Part Vo72116|2371136156

72178J34

Qty Price Ea.1 I1 I

Total

$1,750.00

All prices subject to change without prior notice or obligation. T us price uote supersedes all preceding^price quotes,

Customer Acceptance:

Authorized Signature:

Print:

Pl]rchase 0 der:

Sign:. Date:

^ Bobcat Procfuct QuotationQuotat;Date;

bn Number: NEW25,2019A|pril

Ship to Bobcat Dealer Bill ToBobcat of Lincoln, Lincoln, NE

City of Lincoln / Lancaster County 8801 HWY 6LINCOLN NE 68507Phone: (402) 464-6381Fax: (402) 464-5989

Contact; Brian Motsch^nbachePhone: 402-464-6381Fax: 402-464-5989E Mail:brian@hamiltonequlprr)entco.c( m

DescriptionNB160 Nitrogen Breaker with Nail Point

Hose Kit - HB980/HB1180 (Long Arm)X-Change Mounting Cap -HB880/HB980/NB150/NB160 and PCF64 platecompactor

Total of Items QuotedDealer P.D.I.


Notes:

Part T<7234567289711361

|56tS7

Qty Price Ea Total

$2,250.00 i

uote supersedes all preceding price quotes,All prices subject to change without prior notice or obligation. T! is price

Customer Acceptance:

Authorized Signature:

Print:

Pu!4-chase 0 der:

Sign:. Date: I

ADDENDUM #1Issue Date:3/12/2019

Bid No. 19-088ANNUAL SKID STEER LOADER RENTALS

Addenda are instruments issued by the Purchasing Department prior to the date for receipt ofoffers which will modify or interpret the specification document by addition, deletion, clarificationor correction. Please acknowledge receipt of this addendum in the space provided in theAttribute Section.

QUESTIONSPlease find below questions on the above referenced project:

1. Are you looking for a wheeled or track machine?

a. Both, some are rubber-tired machines and a couple are tracked.

2. What size of machine?a. Listed in the bid line items.

3. High flow or non-high flow?

a. The 332G for Package 1 and the 324E and 325G for Package 4.

4. Pilot controls or hands a foot?

a. Joysticks on all.

5. Cab (heat & A/C) (heat only) or non-cab?

a. Listed in the specifications.

6. Smooth bucket or tooth?

a. Listed in the bid line items.

7. Equipped with safety beacon?

a. No.

8. Equipped with GPS?a. No.

9. Equipped with mirrors?

a. Yes and back-up camera's.

10. Fire extinguisher?

a. The individual departments take care of this.

11. For the attachments do you know what they are looking for?

a. They are listed on the bid line items.

END OF ADDENDUM NO. 1

All other terms, conditions and requirements of the request remain the same as originallyindicated in the document or as modified on previous addenda.

Sharon Mulder,Asst. Purchasing Agent


Bid No. 19-088Annual Skid Steer Leader Rentals


NOTE: BID IS EXTENDED TO FRIDAY, MARCH 29, 2019 AT 12:OOPM.

1. Further clarification to the specifications/line items will be added with Addendum 3.

END OF ADDENDA NO. 2


Rachelle Hinze,Buyer


Bid No. 19-088SKID STEER LOADERS - ANNUAL RENTALS


QUESTIONS

1. 3.1 Do you want us to bid an equivalent machine for manufacturer model 323E orbid a machine equivalent to the specs listed? Model 323E specs are significantly higherthan the minimum specs listed.

Please bid a Model 323E or an equivalent.

2. 4.1 Do you want us to bid an equivalent machine for manufacturer model 318E or bid

a machine equivalent to the specs listed? Model 318E specs are lower than the

minimum specs listed.

Please bid a Model 318E or an equivalent.

3. 3.1 Manufacture model@ given is a 323E which is a track machine. The section

heading states "4-Wheel skid leader rental." Which machine do you want us to bid? A

track machine or a wheeled machine.

This machine should be a track leader.

4. 1.1 Specifications asks for 5-cylinder engine in bid line number 1. The make andmodel example, Deere 332G only has 4-cylinders. Which one is being requested? A 5-cylinder engine listed in the spec or a 4-cylinder engine that is compatible with the modelin the example.

Please bid Model 332G as a 5-cylinder or an equivalent.

5. 4.1 Specifications asks for minimum net power 71 Hp. It also asks for gross Hp of

63.2. Gross Hp would need to be more than the net.

Please reference net power of 71 hp and gross of 74 hp.

6. 4.3 Can the high flow hydraulic system spec be stated in GPM? (Gallon per

minute) This is the universally accepted measurement. Only Deere rates their hydraulic

system both in GPM and horsepower.

The hydraulic pump flow shall be 21 gpm to high flow option of 29 gpm.

7. 4.5 Specs ask for net Hp of 701. Isthisatypo? Manufacturer model# given is a325G which is a track machine. The section heading states "4-Wheel skid loader

rental". Which machine do you want us to bid? A track machine or a wheeled

machine? Can the high flow hydraulic system spec be stated in GPM?

The correct net power hp is 70. This is for a track loader and not 4-wheel. The hydraulic

pump flow shall be 1 9 gpm to high flow option of 27 gpm.

8. 5.1 Can the high flow hydraulic system spec be stated in GPM?

The hydraulic pump flow shall be from 21 gpm to 29 gpm.

9. The quantity for package 4 has been changed to one (1) for calculating.

END OF ADDENDUM NO. 3


Sharon Mulder,Asst. Purchasing Agent

SPECIAL PROVISIONSFOR

TERM CONTRACTS

PURCHASING DEPARTMENTCITY OF LINCOLN/LANCASTER COUNTY, NEBRASKA

1. ESTIIVIATED QUANTITIES

1.1 The quantities set forth in the line items and specificationdocument are approximate and represent the estimatedrequirements for the contract period.

1.2 Items listed may or may not be an inclusive requirements forthis category.

1.3 Category items not listed, but distributed by bidder are to bereferred to as kindred items. Kindred items shall receive thesame percentage of discount or pricing structure as itemslisted in the specification document.

1.4 The unit prices and the extended total prices shall be used asa basis for the evaluation of bids. The actual quantity ofmaterials necessary may be more or less than the estimateslisted in the specification document, but the City/County shallbe neither obligated nor limited to any specified amount. Ifpossible, the Owners will restrict increases/decreases to 20%of the estimated quantities listed in the specificationdocument.

2. CONTRACT PERIOD2.1 The material shall be delivered as ordered during the contract

period, beginning from the date of contract execution andending as indicated in the specifications or in the AttributeSection of the bid.

2.2 Bidder must indicate in the Bid, if extension renewals are anoption.

2.3 By mutual consent of both parties it is understood and agreedthat the contract may be renewed at the same prices and/orunder the same conditions governing the original contract.

3. BID PRICES3.1 Bidders must state in the Attribute Section if the bid prices will

remain firm for the full contract period; or if the bid prices willbe subject to escalation/de-escalation.

3.2 Escalation/De-escalation Clause: In the event that prevailingmarket conditions warrant an adjustment in bid pricescontained in the contract, the following escalation/de-escalation clause shall be the only clause applicable oracceptable:1. Contractor shall give written notice to the PurchasingAgent of any proposed changes from contract prices not lessthan thirty (30) calendar days prior to the effective date ofsaid price changes.2. Such notice must be accompanied by a certified copy ofthe supplier's advisory or notification to the contractor of pricechanges.

3. No price escalation will be authorized in excess of theamount of the increase referred to on the supplier's notice.4. Purchasing shall issue a contract Addendum withrevised pricing upon receipt and approval. TheAddendum will be executed by both parties for theremaining term of the contract.5. The approved price change shall be honored for all ordersreceived by the contractor after the effective date of suchprice change.6. Approved price changes are not applicable to ordersalready issued and in process at time of price change.

7. Purchasing reserves the right to audit and/or examineany pertinent books, documents, papers, records or invoicesrelating directly to the contract transaction in question afterreasonable notice and during normal business hours.8. The Purchasing Agent retains the right to determinewhether or not such proposed price changes are in the bestinterests of the City/County.9. If in the opinion of the Purchasing Agent any proposedincrease is found unacceptable, the Purchasing Agentreserves the right to cancel the contract upon thirty (30)calendar days written notice.10. Contractors must tie any price change clause to anindustry-wide or otherwise nationally recognized index, orsome other form of verifiable document. Contractor will putthe Purchasing Agent on the mailing lists for suchpublication so that the Purchasing Agent can monitor saidchanges. Such membership will be no cost to the Owners.

4. CONTRACT ADMINISTRATION4.1 The Purchasing Division will issue a Contract to all

successful bidders. Such contract will incorporate thespecifications and all other forms used during the bidprocess.

4.2 Orders for materials will be made as needed by the variousAgencies following execution by all parties.

4.3 Contractor may be asked to assist the Purchasing Agentwith the development of a list of repetitively purchasedcommodities, to periodically update such list, and to assistin the development of a list of suitable substitutions.

4.4 Contractor shall provide technical advice upon request, andassist in the evaluation of new products.

4.5 Contractor shall monitor orders to ensure the highestpossible fill rate and minimize back-orders.

5. QUARTERLY REPORT5.1 Upon request, the contractor shall provide to the Purchasing

Agent a quarterly report, showing all purchases made underthe terms and conditions of the contract.

5.2 Such quarterly report shall itemize the following information:1. Each ordering department.2. Items and quantities purchased by department.3. Total dollar amount of purchases by department.

10/05/10

ANNUAL SKID STEER LOADER RENTALS

1. GENERAL NOTICE1.1 The City of Lincoln and Lancaster County referred to as Owners, are requesting

bids from qualified companies, hereinafter referred to as Vendor(s) for supplyingrentals of Skid Steer Leaders for various departments.

1.2 Department requests are broke down per package line items in the bid lines.1.2.1 Skid leaders shall be delivered and picked-up by awarded vendor for

each of the departments.1.3 Contract will be awarded to the lowest, responsible, responsive Vendor whose

bid substantially meets all of the required specifications, duties, terms andconditions as defined in this request.

1.4 Vendor must submit their bid and all attachments via the City/County Ebidsystem.1.4.1 To submit a bid, Vendor must be registered with the City of

Lincoln/Lancaster County Purchasing Dept.1.4.2 To register, go to the City of Lincoln website; lincoln.ne.gov

type bid in search boxclick on "supplier registration"follow instructions to completion.

1.5 All general inquiries regarding these specifications or other bid documents shallbe directed via e-mail request to Sharon Mulder, Asst. Purchasing Agent(smulder(®lincoln.ne.gov).1.5.1 These inquiries and/or responses shall be distributed to prospective

Vendors as an electronic addenda.

1.5.2 All inquiries must be submitted to the Purchasing Office 5 calendar daysprior to the bid close.

1.5.3 Vendors are not allowed to discuss this bid with any Owner employee,Engineer/Architect or elected official other than the City/CountyPurchasing Staff through the award process.1.5.3.1 Failure to follow this requirement may result in immediate

disqualification of your bid.1.6 Please provide manufacturer/brand bidding in the line item Attribute Section.1.7 The term of the contract is for one (1) year with the option to renew for three (3)

additional one (1) year terms upon date of contract execution.1.8 The departments within the City and County requesting the skid steer leaders

and their contacts are as follows:1.8.1 Transportation and Utilities, Solid Waste Operations, contact is Kara

Welding1.8.1.1 One (1) skid steer loader

1.8.2 Transportation and Utilities, Water, contact is Rick Roberts1.8.2.1 One (1) skid steer leader

1.8.3 Transportation and Utilities, Fleet Services, contact is Bill Fleisher1.8.3.1 S i x (6) skid steer leaders

1.8.4 Parks and Recreation, contact is Steve Nosal1.8.4.1 One (1 ) skid steer loader

1.8.5 Lancaster County Corrections, contact is Dave Scharf1.8.5.1 One (1) skid steer leader

1.9 Requests are not limited to these departments only.

2. GENERAL INFORMATION2.1 Skid Steers and attachments shall be new or nearly new in satisfactory

operating condition.

2.2 Ohe (1) year lease period with maximum hours of use being 250 hrs.per unit as recorded by the engine hour meter.

2.3 Vendor will provide additional cost per hour for units which exceed themaximum hour limit stated.

2.4 Skid Steer will be replaced with a new or nearly new machine at eachannual renewal if requested by department.

2.5 Attachments will be retained at each annual renewal if mutually determinedby the city and the contractor to be in satisfactory operating condition.

2.5.1 Bid will include an annual "Early Return" penalty for attachments if theOwners do not execute the available extensions.

2.6 Tires/tracks will be switched by the vendor to new machine at the time of annualrenewal with the city paying the prorated cost of tire/tracks wear at the end ofthe contract term if department is requesting new machine.

2.7 In the event repairs are required which are not as a result of misuse or lack ofdaily maintenance by the city the vendor has at their option to either provide aloaner piece of equipment or deduct the lease payment on a loss timepercentage basis, for the time such equipment is out of service. (CalculationBasis: "annual lease cost" - 250 = "cost per lost working hour").

2.7.1 Working hours: 8:00 am to 4:30 pm Monday through Friday,excluding city holidays.

2.8 Normal wear service and repairs will be the responsibility of the vendor.

2.9 Daily maintenance, add oils/fluids, tires, tire repair, tracks, track repair, fuel,ground engaging components, damage due to misuse or lack of daily service orfailure to provide the equipment to the vendor on designated normal wearservices schedules will be the responsibility of the Owners.

2.10 The vendor will provide operation/daily maintenance training and serviceschedules at the time of delivery.

2.10.1 Fleet Services Garage, 901 West Bond, Lincoln, NE.2.10.2 Solid Waste Operations, 6001 Bluff Road, Lincoln, NE.

2.10.3 Parks and Recreation, 1525 Memorial Drive, Lincoln, NE.

2.10.4 Lancaster County, 3801 West "0" Street, Lincoln, NE

2.10.5 Lincoln Water System, 401 Highway 6, Ashland, NE.2.11 Skid Steers must be capable of powering and controlling all attachments

identified in each specific package.

2.12 Skid Steers must be compatible with BobTach coupler and capable ofcontrolling existing Bobcat 6 pin attachments (with wiring modificationsperformed by the County as required).

2.13 Transportation following delivery will be the responsibility of the city within a 25-mile radius of the following locations/departments within the City of Lincoln andLancaster County:

2.13.1 A 24 or 48-hour advance notice from the awarded vendor isrequired prior to delivery.

2.13.2 For the pick-up of skid steer leaders by the Vendor, at least a 48-hour

notice shall be given.

2.14 All advertised standard equipment will be provided on Skid Steers andattachments whether or not specifically addressed.

2.15 All Skid Steers must be Tier 4 Final.

2.16 The quantity of skid steers and associated attachments to be leased areestimates and not to be considered exact quantities.

3. EVALUATION CRITERIA3.1 Bid will be awarded in accordance with Section 13.

Bid Evaluation and Award the "Instructions to Bidders" attachment in the e-bid and also with consideration given to the following criteria:3.1.1 Price indicated in the e-bid line items.3.1.2 Meets the department requirements.

INSTRUCTIONS TO BIDDERSCity of Lincoln, Nebraska, County of Lancaster

E-Bid

1. BIDDING PROCEDURE1.1 Sealed bid, formal and informal, subject to Instructions and General Conditions and any special conditions set forth

herein, will be received in the office of the Purchasing Division, 440 So. 8th St., Lincoln, NE 68508, until the bid closingdate and time indicated for furnishing the City of Lincoln and Lancaster County, hereafter referred to as "Owners" thematerials, supplies, equipment or services shown in the electronic bid request.

1.2 Bidders shall use the electronic bid system for submitting bids and must complete all required fields. If you do not careto bid, please respond to the bid request and note your reason.

1.3 Identify the item you will furnish by brand or manufacturer's name and catalog numbers. Also furnish specificationsand descriptive literature if not bidding the specific manufacturer or model as listed in the specifications.

1.4 Any person submitting a bid for a firm, corporation, or other organization must show evidence of his authority so to bindsuch firm, corporation, or organization.

1.5 Bids received after the time and date established for receiving bids will be rejected.1.6 The Bidders and public are invited, but not required, to attend the formal opening of bids. At the opening, prices will be

displayed electronically and/or read aloud to the public. The pricing is also available for immediate viewing on-line. Nodecisions related to an award of a contract or purchase order will be made at the opening.

1.7 If bidding on a construction contract, the City's Standard Specifications for Municipal Construction 2011 shall apply.1.7.1 Bidders may obtain this document from the City's Design Engineering Division of the Public Works & Utilities

Department for a small fee.1.7.2 Said document can be reviewed at Design Engineering or the office of the Purchasing Division.1.7.3 Said document is available on the web site.

http://www.lincoln.ne.gov/city/pworks/engine/dconst/standard/stndspec/index.htm

2. BID SECURITY2.1 Bid security, as a guarantee of good faith, in the form of a certified check, cashier's check, or bidder's bond, may be

required to be submitted with this bid document, as indicated on the bid.2.1.1 Bid security, if required, shall be in the amount specified on the bid. The bid security must be scanned and

attached to the "Response Attachments" section of your response or it can be faxed to the Purchasing Officeat 402-441-6513. The original bid security should then be sent or delivered to the office of the PurchasingDivision, 440 S. 8th St., Ste. 200, Lincoln, NE 68508 to be received within three (3) days of bid closing.

2.1.2 If bid security is not received in the Office of the Purchasing Division as stated above, the vendor may bedetermined to be non-responsive.

2.2 If alternates are submitted, only one bid security will be required, provided the bid security is based on the amount ofthe highest gross bid.

2.3 Such bid security will be returned to the unsuccessful Bidders when the award of bid is made.2.4 Bid security will be returned to the successful Bidder(s) as follows:

2.4.1 For single order bids with specified quantities: upon the delivery of all equipment or merchandise, and uponfinal acceptance by the Owners.

2.4.2 For all other contracts: upon approval by the Owners of the executed contract and bonds.2.5 Owners shall have the right to retain the bid security of Bidders to whom an award is being considered until either:

2.5.1 A contract has been executed and bonds have been furnished.2.5.2 The specified time has elapsed so that the bids may be withdrawn.2.5.3 All bids have been rejected.

2.6 Bid security will be forfeited to the Owners as full liquidated damages, but not as a penalty, for any of the followingreasons, as pertains to this specification document:2.6.1 If the Bidder fails or refuses to enter into a contract on forms provided by the Owners, and/orifthe Bidder fails

to provide sufficient bonds or insurance within the time period as established in this specification document.

3. BIDDER'S REPRESENTATION3.1 Each Bidder by electronic signature and submitting a bid, represents that the Bidder has read and understands the

specification documents, and the bid has been made in accordance therewith.3.2 Each Bidder for services further represents that the Bidder has examined and is familiar with the local conditions under

which the work is to be done and has correlated the observations with the requirements of the bid documents.

4. CLARIFICATION OF SPECIFICATION DOCUMENTS4.1 Bidders shall promptly notify the Purchasing Agent of any ambiguity, inconsistency or error which they may discover

upon examination of the specification documents.4.2 Bidders desiring clarification or Interpretation of the specification documents for formal bids shall make a written

request which must reach the Purchasing Agent at least five (5) calendar days prior to the date and time for receipt offormal bids.

4.3 Changes made to the specification documents will be issued electronically. All vendors registered for that bid will benotified of the addendum. Subsequent Bidders will only receive the bid with the addendum included.

4.4 Oral interpretations or changes to the bidding documents made in any manner other than written form will not bebinding on the Owners; and Bidders shall not rely upon such interpretations or changes.

5. ADDENDA5.1 Addenda are instruments issued by the Owners prior to the date for receipt of bids which modify or interpret the

specification document by addition, deletion, clarification or correction.5.2 Addenda notification will be made available to all registered vendors immediately via e-mail for inspection on-line.5.3 No formal bid addendums will be issued later than forty-eight (48) hours prior to the date and time for receipt of formal

bids, except an addendum withdrawing the invitation to bid, or an addendum which includes postponement of the bid.

6. INDEPENDENT PRICE DETERIVHNATION6.1 By signing and submitting this bid, the Bidder certifies that the prices in this bid have been arrived at independently,

without consultation, communication or agreement, for the purpose of restricting competition, as to any matter relatingto such prices with any other Bidder or with any competitor; unless otherwise required by law, the prices which havebeen quoted in this bid have not been knowingly disclosed by the Bidder prior to bid opening directly or indirectly to anyother Bidder or to any competitor; no attempt has been made, or will be made, by the Bidder to induce any person orfirm to submit, or not to submit, a bid for the purpose of restricting competition.

7. ANTI-LOBBYINGPRQVISIQN7.1 During the period between the bid advertisement date and the contract award, Bidders, including their agents and

representatives, shall not lobby or promote their bid with any member of the City or County staff or officers except inthe course of Owner sponsored inquiries, briefings, interviews, or presentations, unless requested by the Owners.

8. BRAND NAMES8.1 Wherever in the specifications or bid that brand names, manufacturer, trade name, or catalog numbers are specified, it

is for the purpose of establishing a grade or quality of material only; and the term "or equal" is deemed to follow.8.2 It is the Bidder's responsibility to identify any alternate items offered in the bid, and prove to the satisfaction of the

Owners that said item is equal to, or better than, the product specified.8.3 Bids for alternate items shall be stated in the appropriate space on the e-bid form, or if the proposal form does not

contain blanks for alternates, Bidder MUST attach to its bid document on Company letterhead a statement identifyingthe manufacturer and brand name of each proposed alternate, plus a complete description of the alternate itemsincluding illustrations, performance test data and any other information necessary for an evaluation.

8.4 The Bidder must indicate any variances by item number from the specification document no matter how slight.8.5 If variations are not stated in the bid, it will be assumed that the item being bid fully complies with the Owners' bidding

documents.

9. DEMONSTRATIONS/SAMPLES9.1 Bidders shall demonstrate the exact item(s) proposed within seven (7) calendar days from receipt of such request from

the Owners.9.2 Such demonstration can be at the Owners delivery location or a surrounding community.9.3 If items are small and malleable, the Bidder is proposing an alternate product, the Bidder shall supply a sample of the

exact item. Samples will be returned at Bidder's expense after receipt by the Owners of acceptable goods. The Biddermust indicate how samples are to be returned.

10. DELIVERY (Non-Construction)10.1 Each Bidder shall state on the bid the date upon which it can make delivery of all equipment or merchandise.10.2 The Owners reserve the right to cancel orders, or any part thereof, without obligation, if delivery is not made within the

time(s) specified on the bid.10.3 All bids shall be based upon inside delivery of the equipment/ merchandise F.O. B. the Owners at the location

specified by the Owners, with all transportation charges paid.10.4 At the time of delivery, a designated Owner employee will sign the invoice/packing slip. The signature will only indicate

that the order has been received and the items actually delivered agree with the delivery invoice. This signature doesnot indicate all items met specifications, were received in good condition and/or that there is not possible hiddendamage or shortages.

04/05/12

11. WARRANTIES, GUARANTEES AND MAINTENANCE11.1 Copies of the following documents, if requested, shall accompany the bid proposal for all items being bid::

11.1.1 Manufacturer's warranties and/or guarantees.11.1.2 Bidder's maintenance policies and associated costs.

11.2 As a minimum requirement of the Owners, the Bidder will guarantee in writing that any defective componentsdiscovered within a one (1) year period after the date of acceptance shall be replaced at no expense to the Owners.Replacement parts of defective components shall be shipped at no cost to the Owners. Shipping costs for defectiveparts required to be returned to the Bidder shall be paid by the Bidder.

12. ACCEPTANCE OF MATERIAL12.1 All components used in the manufacture or construction of materials, supplies and equipment, and all finished

materials, shall be new, the latest make/model, of the best quality, and the highest grade workmanship.12.2 Material delivered under this proposal shall remain the property of the Bidder until:

12.2.1 A physical inspection and actual usage of the material is made and found to be acceptable to the Owners;and

12.2.2 Material is determined to be in full compliance with the bidding documents and accepted proposal.12.3 In the event the delivered material is found to be defective or does not conform to the specification documents and

accepted proposal, the Owners reserves the right to cancel the order upon written notice to the Bidder and returnmaterials to the Bidder at Bidder's expense.

12.4 Awarded Bidder shall be required to furnish title to the material, free and clear of all liens and encumbrances, issued inthe name of the Owner, as required by the specification documents or purchase orders.

12.5 Awarded Bidder's advertising decals, stickers or other signs shall not be affixed to equipment. Vehicle mud flaps shallbe installed blank side out with no advertisements. Manufacturer's standard production forgings, stampings,nameplates and logos are acceptable.

13. BID EVALUATION AND AWARD13.1 The electronic signature shall be considered an offer on the part of the Bidder. Such offer shall be deemed accepted

upon issuance by the Owners of purchase orders, contract award notifications, or other contract documentsappropriate to the work.

13.2 No bid shall be modified or withdrawn for a period of ninety (90) calendar days after the time and date established forreceiving bids, and each Bidder so agrees in submitting the bid.

13.3 In case of a discrepancy between the unit prices and their extensions, the unit prices shall govern.13.4 The bid will be awarded to the lowest responsible, responsive Bidder whose bid will be most advantageous to the

Owners, and as the Owners deem will best serve the requirements and interests of the Owners.13.5 The Owners reserves the right to accept or reject any or all bids; to request rebids; to award bids item-by-item, with or

without alternates, by groups, or "lump sum"; to waive minor irregularities in bids; such as shall best serve therequirements and interests of the Owners.

13.6 In order to determine if the Bidder has the experience, qualifications, resources and necessary attributes to provide thequality workmanship, materials and management required by the plans and specifications, the Bidder may be requiredto complete and submit additional information as deemed necessary by the Owners. Failure to provide the informationrequested to make this determination may be grounds for a declaration of non-responsive with respect to the Bidder.

13.7 The Owners reserves the right to reject irregular bids that contain unauthorized additions, conditions, alternate bids, orirregularities that make the Bid Proposal incomplete, indefinite or ambiguous.

13.8 Any governmental agency may piggyback on any contract entered into from this bid.

14. INDEMNIFICATION14.1 The Bidder shall indemnify and hold harmless the Owners from and against all losses, claims, damages, and

expenses, including, attorney's fees arising out of or resulting from the performance of the contract that results inbodily injury, sickness, disease, death, or to injury to or destruction of tangible property, including the loss of useresulting therefrom and is caused in whole or in part by the Bidder, any subcontractor, any directly or indirectlyemployed by any of them or anyone for whose acts any of them may be liable. This section will not require the Bidderto indemnify or hold harmless the Owners for any losses, claims damages, and expenses arising out of or resultingfrom the sole negligence of the Owners.

14.2 In any and ail claims against the Owners or any of its members, officers or employees by an employee of the Bidder,any subcontractor, anyone directly or indirectly employed by any of them or by anyone for whose acts made by any ofthem may be liable, the indemnification obligation under paragraph 14.1 shall not be limited in any way by anylimitation of the amount or type of damages, compensation or benefits payable by or for the Bidder or anysubcontractor under worker's compensation acts, disability benefit acts or other employee benefit acts.

15. TERMS OF PAYMENT15.1 Unless stated otherwise, the Owners will begin processing payment within thirty (30) calendar days after all labor has

been performed and all equipment or other merchandise has been delivered, and all such labor and equipment andother materials have met all contract specifications.

04/05/12

16. UWVS16.1 The laws of the State of Nebraska shall govern the rights, obligations, and remedies of the parties under this proposal

and any contract reached as a result of this process.16.2 Bidder agrees to abide by all applicable local, state and federal laws and regulations concerning the handling and

disclosure of private and confidential information concerning individuals and corporations as to inventions, copyrights,patents and patent rights.

17. EQUIPMENT TAX ASSESSMENT17.1 Any bid for public improvement shall comply with Nebraska Revised Statutes Section 77-1323 and 77-1324.

Indicating; every person, partnership, limited liability company, association or corporation furnishing labor or material inthe repair, alteration, improvement, erection, or construction of any public improvement shall sign a certified statementwhich will accompany the contract. The certified statement shall state that all equipment to be used on the project,except that acquired since the assessment date, has been assessed for taxation for the current year, giving the countywhere assessed.

18. AFFIRMATIVE ACTION18.1 The City of Lincoln-Lancaster County provides equal opportunity for all Bidders and encourages minority businesses,

women's businesses and locally owned business enterprises to participate in our bidding process.

19. INSURANCE19.1 All Bidders shall take special notice of the insurance provisions required for all City/County contracts (see Insurance

Requirements).

20. EXECUTION OF AGREEMENT20.1 Depending on the type of service or commodity provided, one of the following methods will be employed. The method

applicable to this contract will be checked below:a. PURCHASE ORDER, unless otherwise noted.

1. The contract shall consist of a City of Lincoln and Lancaster County Purchase Order.2. A copy of the Bidder's bid response (or referenced bid number) attached and that the same, in all

particulars, becomes the contract between the parties hereto: that both parties thereby accept and agreeto the terms and conditions of said bid documents.

x b. CONTRACT, unless otherwise noted.1. City and County will furnish copies of the Contract to the successful Bidder who shall prepare

attachments as required. Insurance as evidenced by a Certificate of Insurance (as required), suretybonds properly executed (as required), and Contract signed with the dated.

2. The prepared documents shall be returned to the Purchasing Office within 10 days (unless otherwisenoted).

3. The City and County will sign and date the Contract.4. Upon approval and signature, the City and County, will return one copy to the successful Bidder.

21. TAXES AND TAX EXEMPTION CERTIFICATE21.1 The Owners are generally exempt from any taxes imposed by the state or federal government. A Tax Exemption

Certificate will be provided as applicable.

22. CITY AUDIT ADVISORY BOARD22.1 All parties of any City agreement shall be subject to audit pursuant to Chapter 4.66 of the Lincoln Municipal Code and

shall make available to a contract auditor, as defined therein, copies of all financial and performance related recordsand materials germane to the contracVorder, as allowed by law.

22.2 The Water Division of the City of Lincoln is taxable per Reg. 066.14A and no exemption certificate will be issued.

23. E-VERIFY23.1 In accordance with Neb. Rev. Stat. 4-108 through 4-114, the contractor agrees to register with and use a federal

immigration verification system, to determine the work eligibility status of new employees performing services within thestate of Nebraska. A federal immigration verification system means the electronic verification of the work authorizationprogram of the Illegal Immigration Reform and Immigrant Responsibility Act of 1996, 8 U.S.C. 1324 a, otherwise knownas the E-Verify Program, or an equivalent federal program designated by the United States Department of HomelandSecurity or other federal agency authorized to verify the work eligibility status of a newly hired employee pursuant tothe Immigration Reform and Control Act of 1986. The Contractor shall not discriminate against any employee orapplicant for employment to be employed in the performance of this section pursuant to the requirements of state lawand 8 U.S.C.A 1324b. The contractor shall require any subcontractor to comply with the provisions of this section. Forinformation on the E-Verify Program, go to www.uscis.gov/everify.

04/05/12

Advertise 2 timesFriday, March 8, 2019

Friday, March 15, 2019

City of Lincoln/Lancaster CountyPurchasing Division

NOTICE TO BIDDERS

Sealed bids will be received by the Purchasing Agent of the City of Lincoln/Lancaster County,Nebraska BY ELECTRONIC BID PROCESS until: 12:00 pm, Friday, March 22, 2019 forproviding the following:

Skid Steer Leaders, Annual RentalsBid No. 19-088

Bidders must be registered on the City/County's E-Bid site in order to respond to the above Bid.To register go to: lincoln.ne.gov (type: e-bid - in search box, then click "Supplier Registration").

Questions concerning this bid process may be directed to City/County Purchasing at:(402) 441-8103 or [email protected].