Top Banner
BY DANIEL J. SEBALD Geometric Solids
15

BY DANIEL J. SEBALD Geometric Solids. Introduction Geometric Solids are 3-Dimensional (or “3-D”) shapes – which means they have the 3 dimensions of width,

Dec 22, 2015

Download

Documents

Imogene Potter
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: BY DANIEL J. SEBALD Geometric Solids. Introduction Geometric Solids are 3-Dimensional (or “3-D”) shapes – which means they have the 3 dimensions of width,

BY DANIEL J. SEBALD

Geometric Solids

Page 2: BY DANIEL J. SEBALD Geometric Solids. Introduction Geometric Solids are 3-Dimensional (or “3-D”) shapes – which means they have the 3 dimensions of width,

Introduction

Geometric Solids are 3-Dimensional (or “3-D”) shapes – which means they have the 3 dimensions of width, depth, and height. Basic examples are spheres, cubes, cylinders, and pyramids. But there are lots of others. Some geometric solids have faces that are flat, curved, or both. Some have faces that are all the same shape. Some have faces that are different shapes. But they all have 3 dimensions.

Sphere Cube CylinderPyramid

Page 3: BY DANIEL J. SEBALD Geometric Solids. Introduction Geometric Solids are 3-Dimensional (or “3-D”) shapes – which means they have the 3 dimensions of width,

What are Dimensions?

To understand what “3 dimensional” means, you have to understand what a dimension is. The dictionary defines “dimension” as “a measurement of length in one direction.” But that doesn’t really help. It’s easier to understand what it is by looking at examples. A point has no dimensions. A line has 1 dimension because you can only measure it in one direction. A figure drawn on a piece of paper can be measured in 2 directions, so it is 2 dimensional. Finally, a solid can be measured in 3 directions, so it is 3 dimensional.

Page 4: BY DANIEL J. SEBALD Geometric Solids. Introduction Geometric Solids are 3-Dimensional (or “3-D”) shapes – which means they have the 3 dimensions of width,

Types of Geometric Solids: Polyhedra and Non-Polyhedra

Solids come in 2 types: polyhedra and non-polyhedra. Non-polyhedra describes any geometric solid that has any surface that is not flat, like a sphere, cone, or cylinder. cylinder cone

sphere torus

Page 5: BY DANIEL J. SEBALD Geometric Solids. Introduction Geometric Solids are 3-Dimensional (or “3-D”) shapes – which means they have the 3 dimensions of width,

Polyhedra and Non-Polyhedra

Polyhedra describes a geometric solid that has all flat faces, but the faces don’t have to be the same size or shape. Polyhedra must have at least 4 faces but there is no limit to how many faces they can have. Some examples of polyhedra are pictured below:

Pentagonal prismTruncated tetrahedron

Truncated dodecahedron

Truncated cube

Pentagonal prismRhombicuboctahedron

Page 6: BY DANIEL J. SEBALD Geometric Solids. Introduction Geometric Solids are 3-Dimensional (or “3-D”) shapes – which means they have the 3 dimensions of width,

Truncated What?

Some of the Polyhedra are called Truncated. Truncated means that something is cut off. In a truncated polyhedra, the corners, called “vertices,” are cut off and replaced with a new face. For example, a truncated cube has new triangle shaped faces where the cube’s vertices were. The shape of the original polyhedra will determine the shape of the new face in each vertex.

The pictures below show a cube, and then a truncated cube.

Cube Truncated Cube

Page 7: BY DANIEL J. SEBALD Geometric Solids. Introduction Geometric Solids are 3-Dimensional (or “3-D”) shapes – which means they have the 3 dimensions of width,

Platonic SolidsA Platonic Solid is a special type of Polyhedra, in which each face is exactly the same, and the same number of faces meet at each corner, or vertex.

They were named after a famous philosopher and mathematician from ancient Greece named “Plato.”

Page 8: BY DANIEL J. SEBALD Geometric Solids. Introduction Geometric Solids are 3-Dimensional (or “3-D”) shapes – which means they have the 3 dimensions of width,

Platonic Solids

Amazingly, there are only 5 geometric solids that qualify as platonic solids.

NAME Number of Faces

Tetrahedron 4

Hexahedron(cube) 6

Octahedron 8

Dodecahedron 12

Icosahedron 20

Page 9: BY DANIEL J. SEBALD Geometric Solids. Introduction Geometric Solids are 3-Dimensional (or “3-D”) shapes – which means they have the 3 dimensions of width,

The Five Platonic Solids

Cube

Tetrahedron

Dodecahedron

Icosahedron

Octahedron

Page 10: BY DANIEL J. SEBALD Geometric Solids. Introduction Geometric Solids are 3-Dimensional (or “3-D”) shapes – which means they have the 3 dimensions of width,

Vocabulary Words

Dimension: a measurement of length in one directionEdge: the line where faces of a geometric solid meet Face: an individual surface of a geometric solid Non-Polyhedra: a geometric solid that has any surface

that is not flatPlatonic solid: a polyhedra whose faces are all exactly

the same, and the same number of faces meet at each vertex

Polyhedra: a geometric solid that has all flat faces Truncate: to cut off the vertices of a geometric sold and

replace them with a new face. Vertices: corners of geometric solid (singular is vertex)

Page 11: BY DANIEL J. SEBALD Geometric Solids. Introduction Geometric Solids are 3-Dimensional (or “3-D”) shapes – which means they have the 3 dimensions of width,

Platonic Solids Names

_____ icosahedron _____ dodecahedron _____ cube _____ tetrahedron _____ octahedron

Quiz Part 1 – Match the platonic solids to their names

a. b.

c.

d. e.

Page 12: BY DANIEL J. SEBALD Geometric Solids. Introduction Geometric Solids are 3-Dimensional (or “3-D”) shapes – which means they have the 3 dimensions of width,

Quiz – Part 2

1. How many sides does an icosahedron have? _________

2. Is a soccer ball shaped like a a. truncated icosahedronb. truncated dodecahedronc. truncated cube

3. What is a vertex? _____________

Page 13: BY DANIEL J. SEBALD Geometric Solids. Introduction Geometric Solids are 3-Dimensional (or “3-D”) shapes – which means they have the 3 dimensions of width,

Platonic Solids Names

__e__ icosahedron __d__ dodecahedron _a___ cube _b___ tetrahedron _c___ octahedron

Answers

a. b.

c.

d. e.

Page 14: BY DANIEL J. SEBALD Geometric Solids. Introduction Geometric Solids are 3-Dimensional (or “3-D”) shapes – which means they have the 3 dimensions of width,

Answers

1. How many sides does an icosahedron have? ___20____

2. Is a soccer ball shaped like a a. truncated icosahedronb. truncated dodecahedronc. truncated cube

3. What is a vertex? __a corner________

Page 15: BY DANIEL J. SEBALD Geometric Solids. Introduction Geometric Solids are 3-Dimensional (or “3-D”) shapes – which means they have the 3 dimensions of width,

Bibliography

Algebra & Geometry – Anything But square.Green, Dan. 2011.

Interactives – 3D Shapeswww.learner.org/interactives/geometryJanuary 29, 2013.

Platonic Solidswww.mathisfun.com/platonic_solids.htmlJanuary 28, 2013.

Understanding Mathematics.Alfeld, Peter. January 22, 1997.

Platonic Solidshttp://mathworld.wolfram.com/platonicsolid.htmlJanuary 29, 2013