BUZZARD GULCH INC

BUZZARD GULCH INC

13925 W US HWY 136 NEW HAMPTON MO 64471

FAX 660–439–2720www.buzzardgulch.comemail [email protected] (800) 821-2932

CATALOG T

BUZZARD GULCH INC

SINCE 1965

MANY CORDLESS GREASE GUNS TO CHOOSE FROM

LINCOLN 12 VOLT NICAD•LINCOLN 14.4 VOLT NICAD•LINCOLN 18 VOLT NICAD•LINCOLN 18 VOLT LITHIUM•LINCOLN 20 VOLT LITHIUM•ALEMITE 12 VOLT NICAD•ALEMITE 14.4 VOLT NICAD•ALEMITE 18 VOLT LITHIUM•ALEMITE 20 VOLT LITHIUM•MILWAUKEE 12 VOLT LITHIUM•MILWAUKEE 18 VOLT LITHIUM•INGERSOLL RAND 20 VOLT LITHIUM•DEWALT 18 VOLT NICAD•DEWALT 20 VOLT LITHIUM•

Unique design. Locks on.....Stays on....No leaks! Four hardened spring steel jaws are resilient under high pressure - max 10,000 psi.Grease goes IN, not ON the machine. No more grease mess everywhere.EASY release when pressurised, even on recessed fittings. No more stuck couplers - twisting, yanking or using a screwdriver to get it off. No more broken grease nipples.Ends the waste. Ends the mess. Ends greasing frustration.Fits standard Grease Guns - 1/8" NPT fitting. Fits all SAE and Metric Zerk fittings. Simply replace your existing coupler.

Premium long life battery provides 1700 peak amperes, 22 aryl hydrocarbon receptor, 300 CCA and starts over 40 vehicles on a single charge36 inch (4) gauge cables, 550 am-pere fully insulated copper clampsConvenience features include adjustable multi-position light, bat-tery status indicator, direct current cord outlet and automatic shut-off chargingBlack colored, reflective front label for night time use, durable, drop tested, chemical, heat and cold resistant case

CAL557NEW PRO

SERIES$119.95

Premium long life battery provides 1700 peak ampere, 300 cold cranking amperes; starts over 35 vehicles on a single charge300 watt power inverter for cell phone charging, laptop, spotlight and radio48 inch 4-gauge cables, 550 am-pere fully insulated copper clampsConvenience features include adjustable multi-position light, battery status indicator, DC cord outlet, and automatic shut-off chargingCamo colored, durable, drop-tested, chemical, heat and cold resistant case

CAL555NEW

PRO PACK WITH

INVERTER$163.50

The smallest and lightest portable power unit that includes patented technology on the marketUses 12000 mAh high capacity, high power, battery, that is fast charging and has low self-dis-charge, cycles can reach 1000 timesFeatures include 12 volt emergen-cy start, LED flashlight and USB port for device use and chargingThree (3) lighting modes: Standard, Strobe, SOSMultiple safety features built-in

CAL550MICRO

BOOST FOR CARS AND

ELECTRONICS$120.30

The smallest and lightest portable power bank on the market. Easily stored in glovebox, center console or purseUses 8000mAh high capacity, high power, battery, that is fast charg-ing and has low self-discharge, cycles can reach 1000 times.LED Flashlight and USB port for charging cell phones, tablets, cameras, GPS units, etc.Jump start passenger vehicles, light duty trucks, motorcycles, ATV's, even boats, jet skis and more!Includes 4-1 USB Adapters, 110V Wall Outlet Charger, 12V Vehicle Charger, and Jumper Clamps with Fuse

CAL540MICRO

BOOST FOR CARS AND

ELECTRONICS$88.50

Premium long life battery provides 900 peak am-pere, 12 ampere-hour, 200 cold cranking amperes battery; 10 jumps on a single chargeBuilt-in charging circuit with automatic shut-off10 Watt halogen spotlight29 inch 6-gauge cables, 400 ampere lamps with solid copper jawsOnly 13 pounds

CAL558MINI

JUMPER$78.95

LNLGC81001

$29.95LOCK-N-LUBE

Effortless, Quick and Easy greasing. No more STOPPING greasing to clear airlocks, refill or change grease cartridges all the time.No more dribbling grease messing over everything. No more wasted grease or stuck couplers, the pressure release valve fea-ture releases any pressure build-up and ensures the grease in the hose goes back into the canister - not on the floor. High pressure rated 6.5ft grease hose standard. Grease hard-to-reach zerks with ease and from a safe place. Perfect on-site Grease Pump. Foot operated - no more lame arms, hands or flat batteries. Two to three quick strokes adequately greases most joints. Builds up to 10,000 psi without a sweat. Great to clear out those blocked zerks or jack your crawler tracks in the field. Shipped standard with the game changing LockNLube Grease Gun Coupler - Grease goes IN, not ON the machine.

LNLKL-E41F

$299.95LOCK-N-LUBE

AAbrasive Disc 9,69,70,71 Adjustable Wrench 36 Air Compressor 99Air Hose 3,4,5,8Air Hose Reel 3,4 Air Tool Accessories 4-11, 19-27, 52Assortments 84-85BBall Joint Fork 11,96Band Saw Blades 72Battery 65,106Battery Chargers 1,65,77,106 Battery Tester 73Battery Tool 59Bead Seating Tools / Bead Breaker 86-88Bearing Packer 58Bearing / Race Set 43,58Bench Grinder 69Bench Grinder Brushes / Stones 68,69 Blow Guns 6,52 Bolt Cutter 47,57Bolt Extractors 35Bottle Jack 92,94Brake Bleeder 53Breaker Bar 30Brushes 9,10,58,68,69Burrs 10CC-Clamps 49,56,57Carts 101Center Punch 40,44Chain 80,100Chain Wrench 47,59Chisels 11,13,40-42, 44,58Chop Saw 64Chop Saw Blades 70Chucks 13,63,89Circuit Tester 53,58Come Along 80Cordless Tools 1,66,67,106,108-110Coupler 1,5,7,11,97,106,107Creeper 53,101Crimper 19,46,49,84Crowfoot 29Cut Off Wheels 9,70,71DDEF 103Die Grinder 9,10,12,18,19Drills 1,13,18,19,64,66Drill Bits 60-63Drill Bit Sharpener 63 Drill Chucks 63Drill Press 94EEasy Out 35,58,62Electric Cord 4,74,75,77Emory Cloth 82Extensions 20,22,23,30,63FFencing Tool 46,49,58Filters 9Filter Wrench 46,52,96Flap Wheels 71Flaring Tool 53Flash Light 43,53,65,73,74,98Fluid Evacuator 100Fuel Transfer 102,103,104Funnel 101Fuses 85

GGarden Hose 97Gear Puller 50,51Gear Wrench 37,38Glasses 98Grease Buster 105Grease Gun 19,67,105-110Grease Pump 105Grinders 12,19,64,67Grinder Brushes 68Grinding Wheels 69,71HHacksaw 59Hammer 11,13,18,33,34,59,87Hex 53,54,55,63Hitch Pins 84,85Hitch Pin Clip 84Hole Saws 72Hook & Pick 42-44,52,58,96Hooks 80Hose Clamp Pliers 43,48Hose Reel 3,4,58,96,97,103-105IImpact Driver 33,53Impact Sockets 20-27Impact Wrench 14-19, 64,66,112JJacks 92-94Jack Stands 92,93,94Jumper Cable 1,76Jump Start Jump-Carry 1,77KKnife 59,96LLetter & No Stamp 33Lights 74, 78-79, 98Line Wrench 29,32Load Binders 80,81Locking Pliers 47,49,59Locknut Socket 29

RRadiator Cleaner 52Ratchet 14,18,19,30Ratchet Tie Down 81Ratchet Wrench 37,38Reciprocating Saw 13,64,67Reducer 5,20-23,31Regulator 9Rethreader Sets 35,36,59,62Rivitor 98Roll Pin Assortment 85Roller Chain 100SSafety 98Sand Screen 82Sander 12,13Saws 64,67Saw Blades 70,72Scraper 13,19,42,43,58Screw Extractors 35,58,62Screwdriver 33,39,42-44Seal Drivers 58Siphon 6,99Shackles 83Slide Hammer 50,93Slings 83Snaps 57Snap Ring Pliers 47,48Socket Holder 38,39Socket Sets 22-29, 33,54,112Steering Wheel Spinner 84Stud Remover / Installer 58Swival 3,6,7,105,107TT-handle 55Tach 73Tap & Die 33,35,36,53,62Tape 57Tape Measures 59Tarp 59Tarp Straps 82Terminals 52,84Thermometers 73Thread File 58Tire Chuck 89Tire Rod Fork 11,96Tire Tools 9,12,86-91Torque Wrench 31,87Torx 53,54,55Tow Ropes / Straps 83Tractor / Trailer Lights 76,78,79Trailer Jacks 76Transmission Jack 93Transfer Punch 44Trouble Lights 74,75UUnibit 63Utility Knife 59VVises 94,95Voltage Tester 53,58WWater Hose 97Welding Supplies 56,96Wheel Blancer 90Wheel Dresser 69 Wire Strippers 46,49,59,84Wrench 31,32, 37-38, 45Wrench Holder 38,39 XYZZerk 85

MMagnet 43,56-58,96NNeedle Scaler 13,19Nibbler 13Nut Driver 44,47Nylon Ties 82OO-Ring 85Oil Pump 104Oil Transfer 104PPaint Guns 98Parts Trays 57Patches 90,91Pick 42,44,58Pickup Tools 43,52,58Pipe Plug Sockets 54Pipe Wrench 45,96Pliers 43,46-49,59Plier Holder 39,48Polisher 12Porta Power 97Porta Power Parts 97Post Driver 98Power Inverter 77 Pressure Can 73Pressure Washer Hose 97Pry Bars 42,43Punch & Chisel 11,13, 40-44Q

Page #2 Buzzard Gulch, Inc. 800-821-2932 Catalog T

Buzzard Gulch, Inc. 800-821-2932 Catalog T Page # 3

3/8” 25’ COX P COXPLP-325 2 YR 14.5 X 13.75 X 6.25 28 $201.11

3/8” 25’ COX EZ-P COXEZPLP-325 2 YR 14.5 X 13.75 X 6.25 28 $258.443/8” 50’ COX P COXPLP-350 2 YR 17.25 X 18.25 X 6.25 43 $282.10

3/8” 50’ COX EZ-P COXEZPLP-350 2 YR 17.25 X 18.25 X 6.25 43 $339.43

3/8” 50’ COX SHN COXSHN-350 2 YR 21 X 19.75 X 8.75 50 $334.88

3/8” 50’ COX EZ-SH COXEZSH350 2YR 21 X 19.75 X 8.75 50 $396.76

COX P SERIES Compact

Single Arm Made in the

USA

COX SHN SERIESSingle Arm

Super Hub Dual Axle

SupportMade in the

USA

COX EZ-P SERIESCompact

Single Arm80% Slower

Spring ReturnMade in the

USA

COX EZ-SH SERIESSingle Arm

Super Hub Dual Axle Support80% Slower

Spring ReturnMade in the USA

COX T-SHN SERIES

Truck MountDual Pedestal

Style ArmTriple Axle

SupportMade in the USA

COX EZ-TSH SERIESTruck Mount

Dual Pedestal Style Arm

Triple Axle Support

80% Slower Spring Drag

LINCOLN

Single ArmHeavy Duty

DesignImported

GOODYEAR

Single ArmGoodyear Air Hose Attached

Imported

BGI

Single ArmBest quality We can Find for the

PriceImported

3/8”3/8”3/8”

3/8”

3/8”

3/8”

3/8” 50’ LINCOLN LIN83753 1 YR 20.25 X 21.75 X 9 40 $155.10

3/8” 50’ GOODYEAR BGAR46731 2 YR 20.25 X 20.50 X 9.25 40 $157.64

3/8” 50’ BGI BGAR3688 1YR 20.75 X 19.50 X 10.25 48 $107.13

1/4”

1/4”

1/4”

3/8” 75’ COX

EZ-TSH

COXTSHN375 2 YR 25.5 X 23 X 9.25 82 $500.50

3/8” 75’ COX

TSHN

COXEZTSH375 2 YR 25.5 X 23 X 9.25 82 $ 562.38

3/8” 100’

COX

EZTSH

COXTSHN-3100 2 YR 25.5 X 23 X 9.25 85 $552.393/8” 100’

COX

TSHN

COXEZTSH3100 2YR 25.5 X 23 X 9.25 85 $614.25

3/8”

3/8”

3/8”

3/8”

1/2” 50’ COX SHN COXSHN-450 2YR 21 X 9.25 X 16.63 54 $373.101/2”

1/2” 50’ COX EZ-SH COXEZSH-450 2YR 21 X 9.25 X 16.63 54 $434.981/2”

1/2” 75’ COX EZ-TSH COXEZTSH-475 2YR 9.25 X 25.50 X 23 82 $588.771/2”

1/2” 75’ COX TSHN COXTSHN-475 2YR 21.19 X 9.75 X 19.63 82 $526.891/2”

1/2” 100’ COX TSHN COXTSHN-4100 2YR 9.25 X 25.50 X 23 95 $569.661/2”

1/2” 50’ Lincoln LIN83754 1YR 20.25 X 9 X 21.75 48 $174.901/2”

1/2” 50’ BGI BGAR3689 1YR 20.75 X 10.25 X 19.50 51 $139.063/8”

1/2” 50’ Goodyear BGAR46741 2YR 20.25 X 9.25 X 20.50 46 $185.721/2”

1/2” 100’ COX EZ-TSH COXEZTSH-4100 2YR 9.25 X 25.50 X 23 95 $631.541/2”

Replacement Spring

COX1935COX433COX434COX498

“P” 3/8” NPT for 3/8” Hose3/8” NPT for 3/8” Air Hose1/2” NPT for 1/2” Air Hose1/4” Welding Hose Swivel

$41.25$71.85$74.50122.50

#7) AIR/WATER HOSE BALL STOPS FOR AUTOMATIC HOSE REELS

COX131COX254COX633

1/4” - 3/8” Check Ball1/2” Check Ball

Welding Hose Check Ball

$ 8.21$19.22$16.12

Cox1728-1 $21.56Bracket (all But 375-475-550)

12” SHN-350 Canister 15” SHN3100 Canister

Cox274-1-SS $1.50

#27) REPLACEMENT BRACKETS FOR COX AUTOMATIC REELS

Cox 690-2Cox 698-2

$81.88$167.50

#12) REPLACEMENT DOG SPRING FOR COX AUTOMATIC REELS

Replacement Cox Automatic Hose Reel PartsCall For More Parts and Prices.

(Not Shown) 434 Seal Kit $8.95

#1) REPLACEMENT SPRINGS FOR COX AUTOMATIC REELS

#6) AIR/WATER HOSE SWIVALS FOR COX AUTOMATIC REELS

1/2” Automatic Air/Water Hose Reels

3/8” Automatic Air/Water Hose ReelsHOSE LGTH THREAD BRAND SERIES PART # WARRANTY DIMENTIONS WGT PRICE

Cox5153-50Cox5154-50

$62.50$85.94

NOT SHOWN-REPLACEMENT HOSE FOR COX AUTOMATIC REELS

3/8”X 50 Cox Hose 1/2” X 50 Cox Hose

3/8” 50’ LEGACY ZILLA LGL8011FZ 1YR 21 X 19.75 X 8.75 32 $448.581/4”

3/8” 50’ COX SG COXSG17-L350 2YR 19.5 X 17 X 6.75 40 $281.193/8”

1/2” 50’ LEGACY ZILLA LGL8041FZ 1YR 33 $467.481/2”1/2” 50’ COX SG COXSG19L450 2YR 22 X 19.5 X 8-1/2 52 $376.741/2”

COX SG SERIES

Side MountSingle Arm Made in the

USA

LegacyZillia SeriesSingle ArmHeavy Duty

ImportZilla Hose

High Pressure Reels, Gas Reels, Manual Reels,

Are Available. Call

800-821-2932

MANUAL AIR AND WATER HOSE REELS

Long-Wearing Corrosion •Resistant Adjustable Tension BrakeAll Steel Solid Frame•Swivel Joint•Self-aligning pillow block •bearings support the drum assemblyPositive gear rewind •mechanism3000 PSI•-20 degrees to +225 degree •temperature

COX COMPETITOR 1125 SERIES MANUAL HOSE REEL

COX CHALLENGER 112 & 117 SERIES MANUAL HOSE REEL

Direct Hand Crank •Rewind4000 PSI working •pressureBrass Swivel•-20 to +225 tem-•peratureAdjustable drag •brake

Model #

112-3-100112-3-150117-3-250112-4-75117-4-225

NPT x length

3/8” x 100’3/8” x 150’3/8” x 250’1/2” x 75’1/2” x 225’

WIDE

15.2519.7515.252020

TALL

1313181318

DEEP

1212171217

COST

$151.97$155.61$171.99$166.53$185.64

Model #

1125-4-1001125-4-2001125-4-3251125-5-501125-5-1001125-5-175

NPT x length

1/2” x 100’1/2” x 200’1/2” x 325’3/4” x 50’3/4” x 100’3/4” x 175’

WIDE

21.7527.7533.7521.2527.2533.25

TALL

18.218.218.218.218.218.2

DEEP

17.2517.2517.2517.2517.2517.25

COST 227.50 227.50 235.69 289.38 289.38 295.75

larger sizes available

Page # 4 Buzzard Gulch,Inc. 800-821-2932 Catalog T

3/8” X 100’ Hose Capacity

1/4” air inlet1/4” hose outlettapered sidewall allows for speedy

rewindWinds from any

direction Spring drag

Hose Sold Separately



COXCL350-5016-D16ga 50’ Angle Light with plug WIRE REEL. 3/8 X 50’ 300 PSI AUTO RE-WIND AIR HOSE REEL. Call for other ends that are available on the electric reel. The hose reel is mostly 3/8” x 50’ weight 94 lbs.

$644.28SINGLE MOUNT / DUAL

AUTO REWIND REEL

12 ga 50’ SINGLE OUTLET AUTO REWIND WIRE REEL

3/8” X 50’ 300 PSI AUTO REWIND AIR HOSE REEL

Call for other ends that are available on the electric reel. The

hose reel is mostly 3/8” x 50’ weight 90 lbs.

BGAR38

$21.85

1/4” NPT Holds 100’ of 3/8” Air Hose (sold seperately)25cfmmaxiumairflow120PSI maximum air pressure

Spring tension brake controls reel action

All heavy gauge steel construction

Bakedonenamelfinishthatprovides corrosion resistance

Heavy Duty Frame

Spare BracketsSee Next Page for Applicable Reels

Swivel BracketFor Horizontal Service Mounting, allows reel to swival 345 degrees

PowdercoatedcrinklefinishblackheavygasteelUse on all reels

Swing BracketFor Vertical Surface Mounting, allows reel to swing 180 degrees.

Powder coated crinkle black 3/16” SteelFor use with “T” Only

Mounting BracketForoverheadmounting,fits3”to8-1⁄2”flangeon“I”or“H”beam.

Maximum reel weight: 120 lbsFor use on all Cox Automatic Reels

$122.76

$98.75

COX15725

COXMR-1

DUAL AUTOMATIC HOSE REELS

Swing BracketForverticalsurfacemounting,allowsreeltoswing180˚.

Powdercoatedcrinkleblack3⁄16”steel.For Use With everything but “T” Series

$63.75COX15720

$53.75COX15721

3/8” X 50’ Air Hose Reel with Flexzilla Air Hose Included. Heavy Duty Reel with Great Air Hose

LGL8651FZ

$147.56BGARB38

48.703/8” X 50’ Air Hose Reel with Work-force PVC Air Hose Included. Heavy Duty Reel simular to old Reel Quick

LGL8650

90.95

COXCL-350-5012A

$696.15

1/2’ NPT FLOW•300 PSI Working pressure•Adjustable spring tension to prevent back lash•Heavy duty steel welded construction•Hose not included•

BGARSP14BGARSP38BGARSP12

1/4” SWIVAL3/8” SWIVAL1/2” SWIVAL

3/8 X 1001/2 X 751/2 X 75

PART # OUTLET HOLDS UP TO $54.50 69.95 69.94

BGSP14BGSP38BGSP12

1/4” SWIVAL3/8” SWIVAL1/2” SWIVAL

PART # OUTLET $9.95 19.95 22.50

SWIVALONLY

FLEXZILLAPREMIUM HYBRID POLYMERAIR HOSE

300 PSI NEON GREENSUPERIOR FLEXABILITY IN HOT AND COLD WEATHER -40 TO 140

1/4” X 30” W/1 Swivel Milton1/4” X 5’ W/1 Swivel Milton3/8” X 30” W/1 Swivel Milton3/8” x 5’ w/1 Swivel Milton3/8” x 48” W/ Swivel Goodyear1/2” X 2’ w/3/8” male ends Milton1/2” x 36” w/3/8” male ends Goodyear1/2” x 2’ w/1/2” male ends Milton1/2” x 36” w/1/2” male ends Goodyear

13.86 18.13 14.37 20.07 12.58 14.37 12.66 15.54 12.66

MILTON AND GOODYEAR RUBBER WHIP HOSES

CHPN14-12ACHPN14-25ACHPN14-50A



1/4” MPT1/4” X 12’ w/1 Swivel1/4” x 25’ w/1 Swivel1/4” x 50’ w/1 Swivel

3/8” MPT3/8” x 12’ w/1 Swivel3/8” x 25’ w/1 Swivel3/8” x 50’ w/1 Swivel

1/2” MPT1/2” x 12’ w/1 Swivel1/2” x 25’ w/ 1 Swivel1/2” x 50’ w/ 1 Swivel

14.5319.6534.49

22.0431.8354.45

37.2156.6291.57

S680S680-1S680-2S680-3BG386S681BG123S681-1 BG123-1

Brass Hose Ends. S600 1/4” x 1/4”

$2.20 2 pkS603 3/8” x 3/8”

$3.15 2 pk

BRASS HOSE MENDERSS640-- 1/4” (2 PK) S641-- 5/16” (2 PK)S642-- 3/8” (2 PK)S642-1 -- 1/2” (each)

1/4” Repair Kit:1-699 Female Chuck 1/4”1-663 Male Hose End1-676 Hose Mender3-5/8” Hose Clamps

BRASS FITTINGSS646 1/4 X 1/4 Male Fitting (2 Pk)S647 3/8 x 3/8 Male Fitting (2 Pk)S647-2 1/2” x 1/2” Male Fitting (EA)

1/4” 360 de swivel at two places for most air tools

S657-1 3/8” $11.27

S657$10.36

In Line Oil Lubricator$19.30

Air Regulator with gage. Full flow to complete shut-off. 1/4”

thread $25.38

S638 In Line Air Regulator. Full Flow to complete shut-off.

S637 In Line Air Tool Filter Removes Rust & Dirt

$8.68

MILTON REDUCERSS651 3/8” Male to 1/4” Female S651-1 1/2” Male to 1/4” FemaleS652 1/2” Male to 3/8” FemaleS652-1 3/4” Male to 1/4” Female

MILTON INCREASERSS653 1/4” Female x 1/8” MaleS653-2 3/8” Female to 1/4” MaleS653-4 1/2” Female to 3/8” Male

S638-1

S620

S659 FULL SWIVEL HOSE ENDS

Full 360 de swivel hose end eliminate kinked and twisted air line

$3.20$3.11$3.11$1.85

$7.51

$6.48

$14.50

$1.02$1.70$1.78$3.89

$1.63$2.20$3.37

$2.57$3.85$3.03

GOODYEAR YELLOW RUBBER AIR HOSE

250 PSIDURABLE FARM HOSE

GOODYEAR AIR HOSE

BG3825YBG3850YBG38100YBG1250YBG12100Y

3/8 X 25 3/8 X 503/8 X 1001/2 X 501/2 X 100

$19.68 $32.52 $60.18 $64.50 $119.98

1/4”1/4”1/4”1/2”1/2”

PART # SIZE NPT COST

FLEXZILLA AIR HOSE

LGHFZ3825LGHFZ3850LGHFZ38100LGHFZ1225LGHFZ1250LGHFZ1250YW4LGHFZ12100LGHFZ12100YW4

3/8 X 25 3/8 X 503/8 X 1001/2 X 251/2 X 501/2 X 501/2 X 1001/2 X 100

$27.21 $43.59 $78.26 $37.99 $65.71 $74.18 $119.70 $128.59

1/4”1/4”1/4”3/8”3/8”1/2”3/8”1/2”

PART # SIZE NPT COST

COIL HOSE BRAND SPACE SAVING

NYLON USA COILED HOSES

FLEXZILLA WHIP HOSES

3/8” X 2’ Ball Swival3/8” x 4’ Ball Swival3/8” x 5’ Ball Swival3/8” x 6’ Ball Swival1/2” x 4’ 3/8” npt1/2” x 4’ 1/2’ npt1/2” x 6’ 3/8” npt1/2” x 6’ 1/2” npt1/2” x 8’ 1/2” npt

20.32 23.15 20.32 25.97 21.88 21.98 24.82 24.92 27.88

LGHFZ3802YW2BLGHFZ3804YW2BLGHFZ3805YW2BLGHFZ3806YW2BLGHFZ1204YW3SLGHFZ1204YW4SLGHFZ1206YW3SLGHFZ1206YW4SLGHFZ1208YW4S

S639

Buzzard Gulch, Inc. 800-821-2932 Catalog T Page 5

HOSE OD HOSE ID

S616 19/32” OR 9/16” 1/4”S618 5/8” 1/4”S623 3/4” 3/8”

$4.92$5.05$7.12

REUSE BRASS HOSE MENDERS

BLOW GUNS

S131Blow Gun

$12.82

4” ExtensionSCFM 5.5 @

100 PSIS133 10” Extension

SCFM 4.5 @ 100 PSI$18.52

S134 15” ExtensionSCFM 4.5 @ 100 PSI

$20.72

S150Full Flow Blow Gun

$11.01

S158 24” (2’) Extension

$24.50S159 48”

(4’) Extension$28.75

S153 Blow Gun

$11.91

S154 Blow Gun

$13.21

Siphon Spray Gun Kit1/2” NPT Air Inlet. Complete with 8’ of tubing and vinyl storage pouch. SCFM

13.7 @ 100 PSI

$20.72

4” ExtensionSCFM 10 @ 100

PSI

4” ExtensionSCFM 11.4 @

100 PSI with rubber tip

Bent 4” ExtensionSCFM 11.4 @ 100

PSI with rubber tip

Rubber Blo-Gun Tip. Unique dual thread design permits

use on all BloGuns with 7/16”-27 and 1/8” NPS. (including

all those listed above.) O-ring seal creates an air tight

assembly.

S152$3.50

BGS158 24”-- (2’) Extension

$9.95TI1999336” - (3’) Extension $11.50BGS15948” -(4’)$15.95

S657-2Air Hose Swivel Connector with

flow control 1/4” NPT$13.08

S174Adjustable air

flow Comfort Grip with Rubber Tip Blow Gun

$13.60

S17711” Bent Nozzle

Blow Gunmax pressure 125

$10.88

TYPHOON HIGH VOLUME BLOW GUN* Coilhose’s most powerful blow gun. * Delivering up to 51

cfm with 3 lbs of thrust at 125 psi.

* Ideal for heavy duty clean up and blow off.

* Meets OSHA requirements. * Variable flow trigger for controlled blow off.

1/4” NPT Blow gunComes w/34 cfm tip at

125 psi2.1 lbs of Thrust

Price $20.84

3/8” NPT Blow gunMulti Jet Tip

51 CFM at 125 PSI3.1 lbs of Thrust

Price $41.85

TYPHOON BLOW GUN EXTENSION AND TIPSFOR ALL TYPHOON GUNS

CHPEXT06CN-DPBCHPEXT12CN-DPBCHPEXT24CN-DPBCHPEXT36CN-DPBCHPEXT48CN-DPBCHPEXT60CN-DPBCHPEXT72CN-DPB

REPLACEMENT TIPS

CHPHFN-00M-DLCHPHFN-00F-DLCHPMJN-0-DL

6”12”24”36”48”60”72”

HF MaleHF FemaleMulti-Jet

10.6812.1014.3516.9620.0825.4825.48

4.22 4.2217.89

EXTENSION LENGTH $

CHPTYP3800CS

HIGH PRESSURE TIPS FOR HIGH PRESSURE GUNS

Steel Brush TipCHPHFN-BT11-DPB

- $20.08Nylon Brush Tip

CHPHFN-BT12-DPB - $20.08

Scraper Tip CHPHFN-ST-DPB

Used to directly Scrape away hardened,

dried, or

baked-on material

$16.16

Pinpoint TipCHPHFN-PT-

DPBDirects the air stream

with precision$16.16

Siphon Tip KitCHPTSN16-PB

8’ Polyvinyl Tube, 16” Ex-

ctension, Sinker, Extension Tip,

and Flow Control

$36.56

CHPTYP2500CS

CHPTYP2501-CS1/4” NPT Blow Gun

Chrome with High Flow Tip34 CFM at 125 psi

2.1 lbs of thrust

Price $33.15

S151 Control Valve$9.45

1/4” NPT FemaleSCFM 24.5 @ 100

PSI

Typhoon Typhoon

Typhoon

NewAll Metal

Adapter for typhoon to use any tip

<<,<------->Works on

Everything but Typhoon and With

Typhoon w/adapter

CHPHFN-ADP------->

cheaper blowgun

1/8” MPT 5 Pc Blow Gun Needle

Tip Assortment Kit

CHPSNT-KIT-DPB$18.68

15/16”, 1-3/16”, 1-3/4”, 2-15/32”,

2-3/4”

CHPST12Safety Shield

Tip$7.84

CHPSAT13Rubber Tip

$4.39

CHPST10Safety

Standard Tip

$2.96

CHPST11Safety

Booster Tip$5.41

CHPSTFF066” Safety Flexibly

Extension$11.93

CHPSTFF1212” Safety Flexible

Extension$12.42

CHP811Steel Brush

$13.84

CHP822Nylon Brush

$13.26

CHPHFN-ADP1/8” NPT

Typhoon Blow Gun Adapter

Fits all 1/8” Typhoon Blow Guns Tips

4.26

CHPEXT12X45-DPB 12” Extension 45o Angle $20.94CHPEXT24X45-DPB 24” Extension 45o Angle $22.81CHPEXT36X45-DPB 36” Extension 45o Angle $24.92CHPEXT48-DPB 48” Bent Tip Only $16.60

Page # 6 Buzzard Gulch, Inc. 800-821-2932 Catalog T

S174 S157

TURBO BLO GUNSLightweight and durable aluminum body•Maximumflowforeasyclen-upandblowoff•ofeventheheaviestshavingsandchipsIncludesajustablenozzle•3/8” NPT Inlet•42cfm@125psi•230psimax•

S181$31.91

S182$46.71With10”Extension

S1833PC.TipKit

Adj,HighVolume,FanSpray$11.01

Safety Tip SCFM 10.5 @ 100 PSINon Safety Tip SCFM 11.6 @ 100

PSI

$7.12$7.18

$7.12

CHP15-04BS CHP15-06BS

CHP14-04BS

AIR HOSE COUPLERS

M STYLE 1/4” NPTM STYLE 3/8” NPT

A STYLE 1/4” NPT

H SYTLE 1/4” NPTH STYLE 3/8” NPT

L STYLE 1/4” NPT

P STYLE 1/4” NPTP STYLE 3/8” NPT

T STYLE 1/4” NPT

G STYLE 1/4” NPTG STYLE 3/8” NPTG STYLE 1/2” NPT

S715S718

S775

S1833S1835

S790

S1803S1805

S785

-------S1813S1815

$4.92$6.35

$6.29

$10.42$10.42

$9.25

$10.16$9.90

$5.53

$12.95$12.82

S716S719

S776

S1834S1836

S794

S1804S1806

S786

-------S1814S1816

$4.92$6.35

$7.46

$10.49$10.42

$9.80

$9.97$9.90

$5.53

$13.86$13.01

S727S733

S777

S1839S1837

S791

S1809S1807

S783

S1855S1819S1817

$2.16$3.74

$2.37

$3.87$3.90

$3.42

$3.89$3.96

$2.29

$2.94$2.98$3.37

2 PER PACK

S728S732

S778

S1840S1838

S792

S1810S1808

S784

-------S1820S1818

$2.29$3.74

$2.37

$3.87$3.87

$3.59

$4.13$4.53

$2.31

$3.18$3.72

S755 1/4” Push type coupler M style

S756 1/4” Push type coupler M style

$8.03

S745 1/4” UniversalFemale coupler

$8.94

S746 1/4 UniversalMale coupler

MILTONS711

COMBINATION S715 & S727

$5.98

STYLE OF COUPLER AND NPT THREAD

COILHOSE ACME A STYLE FITTINGS FOR LARGER FLOW OF AIR

A900B4F 1/4” NPTA900B6F 3/8” NPT

A900B4M 1/4” NPTA900B6M 3/8” NPT

$8.36$8.45

A900N4M 1/4”A900N6M 3/8”

$1.73$2.38

A900N4F 1/4”A900N6F 3/8”

$1.69 $2.69

EACH EACH EACH EACH

Fittings rotate 360° at a 45° angle in any direction. Maximum working pressure: 145 PSI

Temperature range: -37° F to 176° F.

S218 - 6 PC. "M" Style coupler, plug

and swivel kit. All 1/4" NPTKit includes:

1 - 715 - Female Coupler3 - 727 - Male Plugs

1 - 728 - Female Plug1 - 99681-4 Variable Angle Swivel

$16.71

S219 - 5 PC. "M" Style - SAFETY coupler

and plug kit. All 1/4" NPTKit includes:

3 - 727 - Male Plugs1 - 728 - Female Plug

1 - 99705 - Push Button Safety Coupler,

PREVENTS ACCIDENTAL DISCONNECTS

$17.48


S99681-11/4” Male X 1/4”

Female npt$6.99 S99681-7

1/4” X 1/4” Female npt

$7.03

A-M-T STYLE MILTON UNIVERSAL COUPLERS

Coupler with pull

back collar female/female

Coupler with pull back

collar female/NPT

male

Push Button Safety Coupler

female/NPT male

S99706-----------------

S99774

----------------------------------

-----------------

----------------------------------

S99788

--------------------------------

$12.69-----------------

$12.82

--------------------------------

----------------

--------------------------------

$12.82

Push Button Safety Coupler

female/NPT female

S99705-----------------

S99773

----------------------------------

-----------------

----------------------------------

S99787

--------------------------------

$12.69-----------------

$12.82

--------------------------------

----------------

--------------------------------

$12.82

PLUG STYLE AND NPT THREAD

SIZE

M STYLE 1/4” NPTM STYLE 3/8” NPT

A STYLE 1/4” NPT

H SYTLE 1/4” NPTH STYLE 3/8” NPT

L STYLE 1/4” NPT

P STYLE 1/4” NPTP STYLE 3/8” NPT

T STYLE 1/4” NPT

G STYLE 1/4” NPTG STYLE 3/8” NPTG STYLE 1/2” NPT

2 PER PACK

S99681-4 S99681-5

S99681-6

Variable Angle Swivel

Fittings

FEMALE COUPLER

MALE COUPLER

COILHOSE ACME A STYLE FITTINGS FOR LARGER FLOW OF AIR

MALE PLUG

FEMALE PLUG

$8.08$8.98

$8.24

Coil Hose Swivel Plugs

$9.12

$8.16

$6.99

S996811/4” x 1/4 mnpt

AIR HOSE PLUGS

AIR SWIVEL FITTINGSQUICK SNAP COUPLERS

CONNECT WITHOUT PULLING THE COLLAR TO INSERT THE PLUG.

$8.36$9.14


DescriptionThe RapidAir 3/4in. MaxLine compressed air piping system is designed for high-demand air tool users and longer air line runs in large buildings. It features high-density polyethylene (HDPE) tubing with an aluminum core to maintain any hand-bent shape for easy wall installation. 175 PSI operating pressure.

Master kit includes: 3 outlet kits 2 tees 3/4in. tubing x 3/4in. male fitting 20 mounting clips Cutter and deburr tools 100 feet of 3/4in. HDPE/aluminum core multilayer tubing

RPM75003/4” Kit for Piping Air

In Any Shop

$189.95

Need Extra Parts---We can help

RPM6030RPM6031RPM6030-50RPM7510RPM8003RPM8005RPM8011RPM8022RPM8065RPM8067RPM8014RPM8024RPM8201RPM8039

3/4 X 100’ HOSE ONLY3/4 X 300’ HOSE ONLY3/4 X 50’ HOSE ONLYSINGLE PORT OUTLET3/4” MNPT FITTING1/2” MNPT FITTING3/4” “T”3/4” X 3/4” SPLICER10 PK CLIPS3/4” ELBOW3/4 RED “T” TO 1/2”3/4 RED UNION TO 1/2”DUAL PORT OUTLET3/4 VALVE W/ SHUT-OF

$139.95 $369.99 $76.04 $29.99 $13.99 $13.99 $19.99 $13.99 $13.99 $15.99 $19.99 $13.99 $39.99 $29.99

Pipe your shed or Shop (The newest Easiest Way)3/4” for Most 75’ to 150’ Buildings

DescriptionThe RapidAir 1/2in. MaxLine compressed air piping system is designed for high-demand air tool users and longer air line runs in large buildings. It features high-density polyethylene (HDPE) tubing with an aluminum core to maintain any hand-bent shape for easy wall installation. 175 PSI operating pressure.

Master kit includes: 3 outlet kits 5 Elbows1 Manifold1 1/2” T” Cutter and deburr tools 100 feet of 1/2in. HDPE/aluminum core multilayer tubing

RPM38001/2” Kit for Piping Air

In Any Shop

$139.95

Need Extra Parts---We can help

RPM6026RPM6026-50RPM3810RPM8001RPM8010RPM8021RPM8064RPM8080

1/2 X 100’ HOSE ONLY1/2 X 50’ HOSE ONLYSINGLE PORT OUTLET3/8 MNPT M FITTING1/2” “T”1/2” UNION FITTING10 PK 1/2” CLAMP1/2” ELBOW

$69.99 $39.99 $27.99 $5.99 $9.99 $7.99 $9.99 $7.99

Pipe your shed or Shop (The newest Easiest Way)1/2” ID for Buildings less than 75’

How About your Shop or Home Garage

100 ft. Rapidair Tubing and cutter(2) 90120 Aluminum Outlet Block(1) 90220 Aluminum Manifold Block(6) 50100 3/8 NPT Straight(4) 50300 Union Elbow(2) 50120 Hand Valve(2) 50125 1/4 NPT Brass nipple(2) 50130 1/4 NPT Brass 45 degree(3) 50135 3/8 NPT Brass Plug

(2) QUICK COUPLERS PICTURED BUT NOT INCLUDED

RPM90500$99.95

About Fast Pipe 1 Inch 100 foot Kit F28100Use the 100ft FastPipe Master Kit to help create a compressed air system in your workshop, garage or industrial building. Create a complete system or connect with an existing system. The lightweight aluminum Fast-Pipe installs in less time than traditional systems with no welding, soldering or glue needed. With aluminum FastPipe you have no corrosion in the lines, smooth inner walls keep air flowing quickly and the o ring seals and sealed connections mean no leaks and less compressor run time.

ContentsMaster Kit includes: 12 Lengths of 1 inch x 8.5 feet FastPipe, 2 packs of pipe clips (20 clips total), 7 unions, 5 elbows, 2 tees, 1 threaded nipple FastPipe x 3/4 inch Male NPT, 3 Wall outlets with two 1/2 inch female NPT outlet ports, and 1 tool includes set of 2 spanner wrenches and Deburr tool. The 100 FastPipe Master Kit includes FastPipe and hardware to get started creating a compressed air system in your shop or garage.

INDUSTRIAL 1” PIPE KITRPMF28100 $599.95

PARTS AND ACCESSORIES

FOR ALL THESE KITS AVAILABLE800-821-2932

C1953 3” Roloc Starter Kit which contains

5-3” course, 5-3” Med scotch brite and 1 holder

$15.50 (Save $0.75)

AIR TOOL ACCESSORIES 3M TYPE ROLOC (Scotch Brite)

Scotch Brite is great for cork or gasket removal. Ideal for

cleaning light oxida-tion on a wide variety

of surfaces

3M75263” 50 Grit

Green (Steel)Bristle Disc

$14.77

3M75273” 80 Grit

Yellow (Aluminum)Bristle Disc

$14.77

3M75293” 120 Grit

White (Aluminum)Bristle Disc$14.82

BJBU0931/4” Die Grind-

er Arbor that will hold any cut off wheel

$4.95

3M19893” x 1/32” x 3/8” Cut

Off Wheels PK of 5$39.18

3M19913” x 3/16” x 3/8” Cut


3M19903” x 1/16” x 3/8” Cut


OLY24CW3132P-13” X 1/32” X 3/8”

Cut Off Wheels

$.65

OLY24-CW3116P-23” X 1/16” X 3/8”

Cut Off Wheels

$.65

MET655317METABO

3” x .040 x 3/8” Cut Off Wheels

$1.13

DIE GRINDER ARBORS


C1952 2” Roloc Starter Kit which contains

5-2” course, 5 2” Med scotch brite and 1 holder

$11.97 (Save $1.33)

3M75242” 50 Grit

Green (Steel)Bristle Disc

$9.35

3M75252” 80 Grit

Yellow (Aluminum)Bristle Disc

$9.35

3M75282” 120 Grit

White (Aluminum)Bristle Disc

$9.35

2” Diameter Carbide Buffing wheel with 1/4” holearbor not included

BJBU094$4.95

BRISTLE DISC

TIRE BUFFING WHEEL SMALL CUT OFF WHEELS

MET655316METABO

3” x .040 x 1/4” Cut Off Wheels

$1.13

PREMIUM FLAP WHEELSPART #GAR10001GAR10003GAR10012GAR10014GAR10023GAR10025GAR10032GAR10034

DIA.1”1”1 1/2”1 1/2”2”2”2 1/2”2 1/2”

THICK1”1”1”1”1”1”1”1”

GRIT60120601206012060120

RPM30,00030,00030,00030,00025,00025,00023,00023,000

COST$3.16$3.16$3.87$3.87$4.64$4.64$5.45$5.24

PART #OLY24-2HOLY24-3H3M74913M7716

OLY24-2M3M7481OLY24-2C3M7480OLY24-3M3M7486OLY24-3C3M7485

DIA.2”3”2”3”

2”2”2”2”3”3”3”3”

TYPE ROLOCROLOCROLOCROLOC

MEDIUMMEDIUMCOURSECOURSEMEDIUMMEDIUMCOURSECOURSE

COST$4.50$5.25$8.2334.15

$0.88$1.54$0.88$1.54$1.10$2.94$1.10$2.94

ROLOC HOLDERS

SCOTCH BRITE PADS

PIGGYBACK FILTER REGULATOR SET 250 PSI$32.06$33.15$55.61$55.61

TPHF802 1/4” FILTER ONLYTPHF503N 3/8” FILTER ONLYTPHF704N 1/2” FILTER ONLYTPHF706N 3/4” FILTER ONLY**250 psi bowl guardRemoves 99.9% of solids and fluids.

1/4” MINI REGULATOR Only

1/4” REGULATOR ONLY3/8” REGULATOR ONLY1/2” REGULATOR ONLY3/4” REGULATOR ONLY

TPHL802 1/4” LUBRICATOR ONLYTPHL803 3/8” LUBRICATOR ONLYTPHL704N 1/2” LUBRICATOR ONLYTPHL906N 3/4” LUBRICATOR ONLYGOOD UP TO 250 PSI

TPHFLM-863

$19.55$20.04$31.64$31.64

$10.14$22.50$22.87$34.00$34.00

$19.55$20.02$31.64$51.80

$100.71

OILER/FILTER/REGULATOR

TPHFR802 1/4” Inlet/OutletTPHFR503N 3/8” Inlet/OutletTPHFR724N 1/2” Inlet/OutletTPHFR726N 3/4” Inlet/OutletAssemblies include:Gauge, Regulator, Filter

TPHR152TPHR802TPHR803TPHR704NTPHR706N

GOOD UP TO 250 PSI

3/8” Air Cleaner/Dryer w/ Desiccant x 2 bags

TPHFLM-864 1/2” Air Cleaner/Dryer w/ Desiccant x 2 bags $100.71

DESICCANT TO TAKE OUT MORE DIRT AND MOISTURE.

OILER-FILTER-REGULATOR KITS185.45185.45216.27412.14

CHP8822R 1/4” FILTER CHP8823R 3/8” FILTER CHP8824R 1/2” FILTERCHP8826M 3/4” FILTER**250 psi bowl guardRemoves 99.9% of solids and fluids. 8.5 oz bowl capacity. 3/4” has metal bowl

CHP8802GH 1/4” REGULATORCHP8803GH 3/8” REGULATORCHP8804GH 1/2” REGULATORCHP8806GH 3/4” REGULATORIncludes gauge and 0-200 psi spring

CHP8842R 1/4” LUBRICATORCHP8843R 3/8” LUBRICATORCHP8844R 1/2” LUBRICATORCHP8846M 3/4” LUBRICATORWith bowl guard & changeable oil rate

CHP8422 1/4” FILTERCHP8423 3/8” FILTERCHP8424 1/2” FILTERCHP8422-GEL REPLACEMENT GEL collects the finest moisture mist. Achieve exceptionally dry air. Beads change color when saturated and are reusable. 250 psi bowl guard

54.03 54.03

63.67148.65

64.14 63.51 68.60 143.17

207.07 207.07 207.07 38.27

COIL HOSE BRAND OILER/FILTER/REGULATOR

CHP8882AAGHM 1/4” CHP8883AAGHM 3/8”CHP8884AAGHM 1/2” CHP8886AAGHM 3/4” Trio Assemblies include:Gauge and Metal Bowl

55.13 55.13 66.01 113.20

EACH

USA

AIR DIE GRINDER OR ELECTIC DRILL ACCESSORIES

TLSA-1TLSA-3TLSA-5TLSA-6

HIGH QUALITYTUNGSTEN CARBIDE

DOUBLE CUT 1/4” SHANK

EACH

1/4” DIA X 3/4” LNG x 1/4 Shank3/8” DIA X 3/4” LNG x 1/4 Shank1/2” DIA x 1” LNG x 1/4 Shank5/8” DIA X 1” LNG x 1/4 Shank

ALUMINUM, PLASTIC, RUBBER

1/4” SHANKSingle Cut

TLSA-1-ATLSA-3-ATLSA-5-ATLSA-6-A

10.10 13.97 21.77 27.40

TLSC-1TLSC-3TLSC-5TLSC-6

1/4” DIA X 3/4” LNG x 1/4 Shank3/8” DIA X 3/4” LNG x 1/4 Shank1/2” DIA X 1” LNG x 1/4 Shank5/8” DIA X 1” LNG x 1/4 Shank

TLSD-1TLSD-3TLSD-5TLSD-6TLSD-7

1/4” DIA X 1/4” LNG x 1/4 Shank3/8” DIA X 3/8” LNG x 1/4 Shank1/2” DIA X 1/2” LNG x 1/4 Shank5/8” DIA X 5/8” LNG X 1/4 Shank3/4” DIA X 3/4” LNG x 1/4 Shank

TLSE-2TLSE-3TLSE-5TLSE-6

TLSF-1TLSF-3TLSF-5TLSF-6

TLSG-1TLSG-3TLSG-5 TLSG-6

TLSL-1TLSL-3TLSL-4TLSL-5

TLSM-2TLSM-4TLSM-5

5/16” DIA X 1/2 LNG x 1/4 Shank3/8” DIA X 5/8” LNG x 1/4 Shank1/2” DIA X 7/8” LNG x 1/4 Shank5/8” DIA X 1” LNG X 1/4 Shank

1/4” DIA X 5/8” LNG x 1/4 Shank3/8” DIA X 3/4” LNG x 1/4 Shank1/2” DIA X 1” LNG x 1/4 Shank5/8” DIA X 1” LNG x 1/4 Shank

1/4” DIA X 5/8” LNG x 1/4 Shank3/8” DIA X 3/4” LNG x 1/4 Shank1/2” DIA X 1” LNG x 1/4 Shank5/8” DIA X 1” LNG X 1/4 Shank

1/4” DIA X 5/8” LNG x 1/4 Shank3/8” DIA X 1” LNG x 1/4 Sha1/2” DIA X 1-3/16” LNG x 1/4 Sha5/8” DIA X 1-1.4” LNG x 1/4 Sha

1/4” DIA X 3/4” LNG x 1/4 Shank3/8” DIA X 5/8” LNG x 1/4 Shank1/2” DIA X 7/8” LNG x 1/4 Shank

TLSC-1-ATLSC-3-ATLSC-5-ATLSC-6-A

TLSD-1-ATLSD-3-ATLSD-5-ATLSD-6-ATLSD-7-A

TLSF-1-ATLSF-3-ATLSF-5-ATLSF-6-A

has one each ofSA-3 SG-3 SA-5 SF-5SC-3 SL-4 SC-5 SD-5SE-3 SG-1PLASTIC BOX

WIRE BRUSHES FOR DIE GRINDERS OR

DRILLS with 1/4” shank

W100021/2” DIA25,000

rpm$8.15

W100053/4” DIA22,000

rpm$12.52

W100111” DIA22,000

rpm$10.79

W10026KNOT 3/4” DIA

22,000 rpm$15.84

W10028KNOT 1-1/8” DIA

22,000 rpm

$16.28

W17681KNOT 3” DIA25,000 rpm

$23.55

W17687KNOT 4” DIA20,000 rpm

$25.91

W17610Crimp 2” DIA20,000 rpm

$13.86

W17616Crimp 3” DIA20,000 rpm

$13.71

Diameter at Largest point x length of cut x

shank size

11.69 15.50 24.40 30.69

10.77 12.73 17.17 21.28 29.38

13.69 15.50 22.72 31.56

12.25 15.19 22.48 30.99

12.25 16.21 22.02 30.65

12.52 19.37 23.70 46.64

12.52 19.43 24.35

Double Cut8 Pc. Burr

Assortmenthas one each of

SA-3 SA-5SC-1 SC-3SD-1 SD-3SF-3 SF-5WOOD BOX

$144.38IR814 TIN

11.69 15.50 24.40 30.69

10.77 12.73 17.17 21.28 29.38

12.25 15.19 22.48 30.99

CODE1= 1/4” DIA X 3/4” Cut Down 1/4” Shaft3= 3/8” DIA x 3/4” Cut Down 1/4” Shaft4= 1/2” DIA x 1-1/2” Cut Down Shaft5= 1/2” DIA x 1” Cut Down Shaft6= 5/8” DIA X 1” Cut Down Shaft7= 3/4” DIA x 3/4” Cut Down 1/4” Shaft

CONE

BALL CONE

TREE

BALL NOSE TREE

BALL

OVAL

CRIMP


Assortment10 Pc. Burr Double Cut

Larger Sizes TL89938

$174.14

800-821-2932or

660-439-2785

FOR QUANTITY PRICING BUZZARD GULCH, INC

13925 West US HWY 136New Hampton, MO

64471

FAX# 660-439-2720

INTERNET www.buzzardgulch.com

[email protected]

10.10 13.97 21.77 27.40

Buzzard Gulch,Inc. 800-821-2932 Catalog T Page #11

$3.27

SG94300 Best chisel retainer available

$3.98

GPCH1002 Quick change chisel retainer for .401 shanks Ir121, ir132 & CP716

$36.33

SG94200 Collar only for SG94300 spring

$6.92

AIR HAMMER ACCESSORIES ~ OLD FORGE IS NOW MAYHEWOF31956

Double Cut Body

Ripper

OF31965Muffler & Tailpipe

Remover

OF31966Inside Muffler Cutter

OF31967Outside Muffler Cutter

OF31968Tailpipe Cut-Off

Tool

OF319726”

Cold Chisel

OF3197410” Cold

Chisel

OF319738” Cold Chisel

OF31975Rivet &

Bolt Cutter

OF31976Scraper

OF319776” Sharp

Point

OF3197818” Sharp

Point

OF319793/8”

Diagonal PointPunch

OF31991Control

Arm Bushing Remover

OF31997Taper Punch

OF319801/2”

Diagonal Point

OF31996Ball Joint Separator

OF319811” x 3-1/2”

Hammer

OF31995Tie Rod

Separator

GPCH1001 Quick change chisel retainer for .401 shanks NOT IR121

$36.33

AES 5120 Replacement Chisel Retainer for .401 regular shankDoes not fit IR121

$2.79

AIR HAMMER REPLACEMENT RETAINERS

AES3300-1 Quick change chisel retainer for .401 shanks NOT IR121

$16.35

GPCH198 Spring Type chisel re-tainer for .401 shanks NOT IR121

$3.27

GPCH199 Spring Type chisel re-tainer for IR121, IR132, & CP716

IF YOU HAVE OTHER BRANDS--WE CAN CHECK

THE CHART TO SEE WHICH ONE FITS YOUR

AIR HAMMER

1. Rivet Cutter2. 3/4” Flat Chisel3. Straight Punch4. Tapered Punch5. Panel Cutter6. Bushing Splitter7. Muffler Cutter8. 5/16” Nut Splitter9. Dual Blade Panel Cutter10. 1” Hammer11. .401 shank

10 Pc. Chisel SetsGPCS110

59.15

$10.89$11.31

$13.24$12.71

$10.86 $9.65

$12.34$11.12

$10.94

$37.37

$24.97$9.47

$37.37

$7.98$9.97

$9.72

$10.44

$12.79

$9.30

OF319702” Wide X

8-1/2” Blade Scraper

$14.38

$29.71

1-1/8” Wide X 18” Long Scraper

OF32010

$31.38

1/8” X 18”

Taper Punch Flat Tip

OF32012

$29.21

3/8” X 18” Long Taper Punch

OF32011

OF319821/2” Head by 4” Long Hammer $13.99

OF319871/2” Head by

6” Long Hammer$20.82

Life Time Guarantee800-821-2932

L41400Stepped Pickle Fork Kit

$55.65

GPCH1001/2” X 7”Flat Chisel

$7.81


$7.81


$8.88

GPCH1031-1/2” X 7”Flat Chisel

$10.66


$11.27


$19.35

GPCH1117” Long

Taperd Punch

$8.14

GPCH1121-1/4”X7-1/2”Chisel/Scraper

$9.19

GPCH1137” Long

Straight Punch

$7.27

GPCH1166-1/2”

Rivet Cutter

$8.60

GPCH1171” Diameter

Hammer

$11.51

GPCH117-71” Diameter

x7” Long

Hammer$18.72

GPCH1255/16”” X 6”Nut Splitter

$10.66

GPCH1263/8”” X10”Nut Splitter

$14.97

GPCH1273/8”” X 18”Nut Splitter

$20.65

OF3198618”

Cold Chisel

$26.00OF31985

18”Nut Splitter

$23.36

GP Grey PneumaticLife Time

Guarantee800-821-2932

NOW

INGERSOLL RANDStandard Duty

Angle Die Grinder

21,000 rpm.25 hp3 cfm

IR301-700C 1/8” Collet $14.85

22,000 rpm.25 hp3 cfm

1/4” collett $104.98

IR301B3MKStandard Duty

Angle Die GrinderW/4 Ea 3” Scotch Brite

Pads and 3” holder

IR327LSHeavy Duty

Air Tire Buffer

3,000 rpm14 cfm3/8-10 spindleQk change chuck

$92.63

IR327Heavy Duty Air

High Speed Tire Buffer

22,000 rpm15 cfm3/8--10 spindle

$67.93

22,000 rpm.25 hp3 cfm1/4” collett

IR301BKStandard Duty

Angle Die Grinder with 10 mounted stones

$74.10

IR307BStandard

Duty Die Grinder28,000 rpm.25 hp3 cfm1/4” collettBall Bearing

$52.49

IR307BKStandard Duty Die Grinder

W/ 10 stones


$64.84

IR302BHeavy DutyAngle Die Grinder

20,000 rpm.33 hp3 cfm1/4” collettBall Bearing

$98.80

IR308BHeavy Duty

Die Grinder


$83.37

IR311AHeavy Duty

6” Dual ActionSander

10,000 rpm6” Dia pad 4 cfm.25 hp $61.75

IR328BHeavy Duty8” Geared

Sander

825 rpm 8” Dia pad

4 cfm.25 hp

$126.59

IR3445MAX4-1/2” Super Duty Angle

Grinder

12,000 rpm5/8 - 11 arbor.88 hp9 cfm

$256.27

Page 12 Buzzard Gulch, Inc. 800-821-2932 Catalog T

IR4152Adjustable

speed control up to

12,000 rpmlight - weight

less than 2 lbs

IR4151Vacuum Ready

Adjustable speed control

up to 12,000 rpmlight - weight less than

2 lbs

ANGLE DIE GRINDER

.4 HP motor1/4” collet

20,000 rpmcomposite

IR5102MAX$154.38

.4 HP motor1/4” collet

25,000 rpmComposite Housing

IR5108MAX

$138.94

$142.03

$142.03

IR312AOrbital Air Sander

3-7/10” x 6-3/4” Pad

8,000 rpm4.6 lbs.

$132.77

IR301B$60.52

IR313AHeavy Duty Air Angle

Sander 7” Pad

5,000 rpm4.5 lbs.

$209.95

IR315

Twin-Piston Straight-Line Air Sander

3,000 rpm (Strokes per Miute, Stroke length 1”)6.6 lbs

$114.24

IR314AHeavy Duty

Air Angle Polisher/Buffer7” Pad

2500 rpm 4.2 lbs

$228.48

IR318AHeavy Duty

Air Vertical Polisher/Buffer7” Pad

2800 rpm 4.5 lbs

$209.95

IR319AHeavy Duty

Air Vertical Sander 7” Pad

5000 rpm 4.5 lbs

$216.13

IR345MAXMAX Series

5” Air Angle Grinder

12000 rpm 3.4 lbs5” Wheel.88 hp5/8-11 arbor

$256.27

BUZZARD GULCH, INC800-821-2932

FAX 660-439-2720www.buzzardgulch.com

[email protected]

IR7803-Boot Boot $13.88IR728-99-KC8 CHUCK $52.73

IR7803-Boot Boot $13.88IR728-99-KC8 CHUCK $52.73

IR7803-Boot Boot $13.88

IR7802-Boot Boot $13.88IR728-99-KC5 Chuck $21.28

$104.98121-K6

$114.24 w/5 pc chisel

INGERSOLL RAND AIR

401 shank diameter5000 bpm1-5/8stroke2 cfm

IR115Standard DutyAir Hammer

$43.23

$49.40116K

$64.84w/5 pc chisel

IR95005 PC CHISEL SET

$21.45

*Edging Tool, *Tailpipe cutter, *Straight Chisel, *Cutting Chisel, *Punch

401 shank diameter3500 bpm3 cfmStroke--2-5/8”


$61.75117K $71.02 w/5 pc chisel


IR121/QSuper Duty

Air Hammer


401 shank diameter1725 bpm3 cfmStroke--4”

IR132Super Duty Air Hammer


IR125Standard Duty Needle Scaler

$175.99

Pf2219-22-19 Needle Pkg. $14.80PF2219-K19 Needle Attachment Kit $57.35

3,200 spm4 cfm

IR325BHeavy DutyAir Nibbler

IR325-350 Cutter $11.13IR325-354 Cutter Die $28.46

$157.47

IR326Heavy DutyAir Cut-Off

18,000 rpm10 cfm

$58.67

IR7802SAHeavy Duty Air Shear

4,200 spm4 cfm

7802S-6021 Center Blade $28.087802S-6022L Left Blade $25.817802S-6022R Right Blade $25.81

$175.99

IR4429Super Duty

Reciprocating Saw

5,750 spm7.6 cfm

$120.42

IR429Heavy Duty

Reciprocating Saw

10,000 spm9 cfm

IRP4CS-6 6pk course blades $14.80IRP4FS-6 6pk fine blades $14.80

$95.72

IR7802RAKC3/8” Keyless Super Duty

Reversible Air Drill

2,000 rpm.5 hp4 cfm

IR7802A3/8” Heavy Duty

Air Drill

IR7802-Boot Boot $13.88IR7802-99 Chuck $37.93

2,000 rpm.5 hp4 cfm

$111.15

IR7802RA3/8” Reversible

Heavy Duty Air Drill

2,000 rpm.5 hp4 cfm

IR7802-Boot Boot $ 13.88IR7802-99 CHUCK $37.93

$135.85

500 rpm.5 hp4 cfm$172.90

IR7803RA1/2” Reversible Standard Duty

Air Drill

500 rpm.5 hp4 cfm

$197.60

IR7807R3/8” Standard Duty

Angle Reversible Drill

1,800 rpm.33 hp4 cfm

$98.80

IR7803AKC1/2” Super Duty Air Drill

W/Keyless Chuck500 rpm.5 hp4 cfm $179.08

IR317A5” Heavy Duty

High Speed Sander

18,000 rpm12 cfm $71.02

IR7803A1/2”

Standard Duty

Air Drill


SEE CUT OFF WHEELS Pg.9

IR7802AKC3/8” Heavy Duty Air Drill Keyless

Chuck

IR7802-Boot Boot $13.88IR728-99-KC5 Chuck $21.28

2,000 rpm.5 hp4 cfm $117.33

IR7803RAKC1/2” Reversible Super Duty Air Drill

With Keyless Chuck

500 rpm.5 hp4 cfm

$203.78

$142.03

19-1/8” needles4,600 rpm1-1/8” stroke15 cfm

7803-Boot Boot $13.88

$555.75

IR118MAXK$148.20

w/5 pc chisel

IR118MAXLong Nose Air

Hammer

401 shank diameter2500 bpmAnti-VibrationStroke--3-1/2”

$132.77

IR122MAXK$148.20

w/5 pc chisel

401 shank diameter3500 bpmAnti-VibrationStroke--2.63”

$132.77

IR122MAXSuper Duty Air

Hammer

INGERSOLL RAND AIROrder 800-821-2932

7,100 rpm180ft lbs Torque

IR105-D21/4” Stubby

RATCHET

250 rpm

25 ft lbs torque $104.98

IR105-L21/4” Standard

RATCHET

250 rpm


IR105-D33/8” Stubby

RATCHET250 rpm


IR107XPA3/8” RATCHET

160 rpm4 cfm

54 ft lbs torqueIR107-Boot $13.88IR107XPA-TRK1 Head Kit $42.50IR107XPA-TK1 Tune Up Kit $30.00

IR1105MAX-D2Reactionless1/4” RATCHET

300 rpm30 ft lbs torque $142.03

IR109XPA3/8” Ratchet

IR109 - Boot $12.03IR109XPA-TRK1 Head Kit $58.50IR109XPA-TK1 Tune Up Kit $78.00

220 rpm4 cfm

76 ft lbs torque

IR2113/8- Butterfly

Impact10,000 rpm 2.5 cfm

150 ft lbs torque

$182.17

IR212Super Duty

3/8” Impact10,000 rpm

2.5 cfm180 ft lbs torque

Wgt. 2.9 lbs

IR216BSuper Duty

3/8” Impact

8,500 rpm3 cfm 200ft lbs

torqueWgt. 2.9 lbs

$185.25

160 rpm4 cfm 54 ft lbs torque

IR107-Boot $13.88IR1077XPA-TRK1Head Repair Kit 42.50

IR1077XPAHeavy Duty

1/2” RATCHET

$120.42

IR1099XPASuper Duty

1/2” Ratchet220 rpm

4 cfm 76 ft lbs torque $172.90

IR2025MAXReactionless

1/2” RATCHET

$287.76

IR1099XPA-TRK1 Head Repair Kit $63.00

IR2015MAXHeavy Duty3/8” Impact

Super Duty

$153.14

$98.80

7,100 rpm--180 ft lbs torque

$281.58

IR211-TK2 Tune Up Kit $45.00

IR212-TK2 Tune Up Kit $38.00IR212- Boot $12.95

Needs grease as well as oil


15,000 rpm4 cfm

300 ft lbs torqueWgt. 2.4 lbs

IR2115 - Boot $19.43IR2115-TK1 Tune Up Kit $48.50IR2115-THK1 Hammer $64.50

IR2115TIMAXSuper Duty

3/8” ImpactTitanium

IR1105MAX-D33/8” Mini Ultra Duty

RATCHET

300 rpm30 ft lbs

torque

$145.12

$264.91

IR1207MAX-D4Super Duty

1/2” Ratchet

200 rpm 65 ft lbs torqueComposite Housing


IR1207MAX-D3Super Duty

3/8” Ratchet

200 rpm 65 ft lbs torque

Composite Housing$154.38


Variable Speed Regulator $160.55

$164.88

Variable Speed Regulator



IR2115QTIMAXSuper Duty 3/8”

ImpactTitanium

15000 rpm4 cfm

300 ft lbs torqueWgt. 1.13 lbs

$271.09

www.buzzardgulch.com

Specs:max torque (reverse) 930 ft lbs.9800 rpmweight: 4.6 lbs.

This tool will loosen a nut tightened to 1,000 ft lbs in 6 seconds

2 year warranty

INGERSOLL RAND AIRFax 660-439-2720

IR231HA-21/2” Super Duty

Impact WrenchExtended Anvil

8,000 rpm 4.2 cfm

590 ft lbs torqueWgt. 6.1 lbs.

$173.52

IR2361/2” Heavy Duty Impact Wrench

7,400 rpm 4.3 cfm


IR236 - Boot Boot $16.65

$111.157,000 rpm 5.4 cfm500 ft lbs torque

Wgt. 6.3 lbs.

IR244-Boot Boot $15.73 $255.65



Specs:max torque (reverse) 930

ft lbs.9800 rpmweight: 4.6 lbs.


2 year warranty

IR2235TI-2MAXExtended Anvil

$324.87

1/2” TITANIUM SUPER DUTY IMPACT WITH EXTENDED ANVIL


IR231HA1/2” Super Duty Impact Wrench

HANDLE EXHAUST8,000 rpm


Wgt. 5.8 lbs.$150.67





2 year warranty

IR2235TI-MAX1/2” Titanium

Super Duty

$317.98NEW

IR244A-21/2”Super DutyExtended Anvil

Impact Wrench

7,000 rpm 5.4 cfm

500 ft lbs torqueWgt. 6 lbs.

IR244-Boot Boot $15.73 $252.56


IR244A1/2” Super Duty Impact Wrench


$185.25



IR2130-21/2” Ultra Duty Impact WrenchExtended Anvil

Composite Housing


10,000 rpm 400 forward torque625 ft lbs torque

In Reverse5.4 cfm wgt 6

IR232TGSL1/2” ThunderGun

$256.27

IR2125QTI MAX1/2” Mini

Impact Wrench

Small Hammer Case 4CFM 270 Ft Lb Torque 15,000 RPM WGT 2.5 Lbs

$301.96


IR232TGSLP32 -- Boot $19.43





IR21301/2” Ultra Duty Impact Wrench

Composite Housing




2 year warranty

IR2235QTI-MAX1/2” Titanium

Super Duty

$324.87NEW


SAME AS THE 2235TI ONLY QUIETIER

$191.43

IR2235QTI-2MAX1/2” Titanium Super

DutyExtended Anvil

Needs grease as well as oil$330.98

IR231 -Boot Boot $12.95


IR2350XP1/2” Composite

Impact Wrench

IR2350-Boot $19.438,900 rpm

5 cfm690 reverse ft lbs torque

Wgt. 4.1 lbs.

$215.51

IR231C1/2” Super Duty Impact Wrench

REAR EXHAUST8,000 rpm


Wgt. 5.8 lbs.



$150.67

BUZZARD GULCH, INC800-821-2932

FAX 660-439-2720www.buzzardgulch.com

[email protected]

Replaces IR2135TI-MAX

NEW

Replaces IR2135TI-2MAX

NEW

IR285B-TK1 Tune Up Kit $46.00IR285- Boot $37.93

INGERSOLL RAND AIRE-mail [email protected]

IR2145QIMAX-63/4” Ultra Duty

Impact Wrench 6” AnvilIR2145M-Boot $25.90

8000 rpm9.5 cfm--30 at load

1350 ft lbs torque in ReverseWgt. 7.4 lbs.

$583.54

IR2161XP3/4” Ultra Duty Impact Wrench

6,000 rpm10 cfm--46 at load1250 ft lbs torque

Working Torque 300-1000

Wgt. 11.8 lbs.

IR2161-Boot $24.98IR2161-TK2 Tune Up $96.50

$763.85



Wgt. 13.1 lbs.

IR2161-Boot $24.98IR2161-TK2 Tune Up $96.50

$802.14

IR2161XP-63/4” Ultra DutyExtended Anvil

Impact Wrench


Working Torque 100-900Wgt. 24.6 lbs.

IR285B-TK1 Tune Up Kit $46.00IR285-Boot $37.93

$620.59


Working Torque 100-900Wgt. 27.8 lbs. $561.93

IR290-TK2 Tune Up Kit $76.00

IR2901” Super DutyImpact Wrench



$1798.78

IR2931” Super Duty

Air Impact



Wgt. 22.8 lbs. $3267.20

needs grease and oil


3/4” Super Duty Impact Wrench

IR261-TK2 Tune Up Kit $73.50IR261-Boot $24.98IR261-THK1 Hammer Kit $126.50

5,500 rpm, 9.5 cfm--38 at load1100 ft lbs torque

Working Torque 200-900 Wgt. 12.4 lbs.

$482.89


IR261-TK2 Tune Up Kit $73.50IR261-Boot $24.98

5,500 rpm9.5 cfm--38 at

load1100 ft lbs

torqueWorking Torque

200-900Wgt. 13 lbs.

$519.32

IR261-33/4” Super

Duty 3” Extended Anvil

Impact Wrench


5,500 rpm9.5 cfm--38 at load1100 ft lbs torque


IR261-63/4” Super Duty 6” Extended Anvil Impact Wrench


IR2593/4” Standard Duty

Impact Wrench

6,000 rpm8 cfm--30 at load

1,050 ft lbs torqueWorking Torque 200-800

Wgt. 8.8 lbs.

$356.92


IR2190TI-6 1” Titanium AIR

IMPACT With6” ANVIL

1650 FT LBS TORQUE

6800 rpmWgt 15.512 cfm

58 cfm working

$820.66

IR2190TI 1” Titanium AIR IMPACT 1650 FT LBS

TORQUE6800 rpm

Wgt 1412 cfm

58 cfm working

IR2190-Boot $33.30IR2190-TK1 Tune Up Kit $78.00IR2190-6-THK1 Hammer Kit $333.50

$820.66

IR285B-61” Heavy DutyExtended Anvil

IR285B1” Heavy Duty

Impact Wrench

IR261

IR261-TK2 Tune Up Kit $73.50IR261-Boot $24.98

$542.79



$1692.57

IR280-61” Heavy DutyExtended Anvil

IR259-Boot $19.43IR259-TK1 Tune Up Kit $22.00

3/4” Maximum Duty

Impact Wrench

IR2145QiMax

$555.14

IR2190-Boot $33.30IR2190-TK1 Tune Up Kit $78.00IR2190-THK1 Hammer Kit $294.50

IR2145QIMAX-33/4” Ultra Duty

Impact Wrench 3” AnvilIR2145M-Boot $25.90

$616.89


8000 rpm9.5 cfm--30 at load

1350 ft lbs torque in ReverseWgt. 7.4 lbs.

IR2145M-Boot $25.90


NEW VERY POPULAR AIRCAT AIR TOOLS

AC1600-TH$358.80

Square Drive: 3/4" Hard Hitting Twin Hammer Mechanism

1,400 (ft-lbs) Loosening TorquePatented Easy Operation Flip lever Forward & ReversePatented Ergonomically Designed HandleBest suited for Heavy-Duty, industrial and truck work.Working Torque: 200-1200 (ft-lbs)RPM (Free Speed): 6,500Weight: 7.5 (lbs) Length: 9.0 (in) 228.6 (mm)Avg. Air Consumption: 6.9 (cfm)Air Pressure: 90-120 PSIAir Inlet (NPT): 3/8"Warranty: 1 Year Parts & Labor

AC1770-XL$371.80

Strongest 3/4" Impact in its class! Hard Hitting "Super Clutch" Twin Hammer Mechanism Ergonomically Designed Handle (reduces operator fatigue) Patented Quiet Technology (86 decibels) Patented through the handle exhaust (keeps debris away from face)Patented Easy Operation Flip lever Forward & Reverse Loosening Torque: 1,400 (ft-lbs) Working Torque: 200-1200 (ft-lbs) Free Speed: 4,500 (RPM) Weight: 7.9 lbs (3.58 kg) Overall Length: 9.25 in (235 mm)Avg.Air Consumption: 8 (CFM) Air Flow Pressure: 90 - 120 (psi) Air Inlet: 3/8" NPT 1-Year warranty

Extreme Duty 3/4” Industrial Grade Aluminum Impact Wrench

Loosening Torque: 1,600 (ft-lbs) Working Torque: 200-1200 (ft-lbs) Blows Per Minute: 950 (BPM - Under Load) Free Speed: 4,500 (RPM) Weight: 12.28lbs (5.72 kg) Overall Length: 8.93 in (227mm) Avg.Air Consumption: 7.8 (CFM) Sound Level: 89 (dBA) Air Inlet: 3/8" NPT Air Flow Pressure: 90 - 120 (psi) 1-Year Parts & Labor Warranty

AC1680$319.80 1” Twin Hammer Heavy Duty

Impact Wrench w/8” Anvil

Loosening Torque: 1,700 (ft-lbs) Working Torque: 170-1500 (ft-lbs) Blows Per Minute: 900 (BPM - Under Load) Free Speed: 6,000 (RPM) Weight: 16 lbs (6.98 kg) Overall Length: 18.42 in (468 mm) Avg.Air Consumption: 7.8 (CFM) Air Inlet: 1/2" NPT Air Pressure: 90 - 120 (psi) 1 Year Parts and Labor

AC1891$517.40

Most Powerful ½ Impact in its class! The Hard Hitting Twin Clutch mechanism creates a high torque initial

impact. All NITROCAT models are suited for heavy duty jobs. Patented through the handle exhaust to keep debris away from face Patented Quiet

Technology (86 decibels)

Easy operation Flip lever Forward & Reverse Loosening Torque: 1,295 (ft-lbs) Working Torque: 200-900 (ft-lbs) Blows Per Minute: 1400 (BPM - Under Load) Free Speed: 9,000 (RPM) Weight: 4.5 lbs (2.04 kg) Overall Length: 8.25 in (209 mm) Avg.Air Consumption: 4 (CFM)2 Year Warranty

AC1150$200.20

1/2” Composite Extreme Torque NitroCat Impact Wrench

Twin Clutch Mechanism Extreme harder hitting impact Recommended for high torque applications

Loosening Torque: 1,295 (ft-lbs) Working Torque: 200-950 (ft-lbs) RPM (Free Speed): 9,000 RPM BPM (Under Load): 1,050 BPM Quiet Technology - 89 dBa Weight 4.4 (lbs.) Length: 7.9" Width 2.8” Height 4.5” CFM: 4.5 (Under Load) 3-Year Parts & Labor Warranty

AC1250-K$253.76

Extreme Power ½ Impact in its class! The Hard Hitting Twin Clutch mechanism creates a high torque initial impact. All NITROCAT models are suited for heavy duty jobs. Patented through the handle exhaust to keep debris away from face Easy operation Flip lever Forward & Reverse

Loosening Torque: 1,295 (ft-lbs) Working Torque: 200-950 (ft-lbs) Blows Per Minute: 950 (BPM - Under Load) Free Speed: 8,000 (RPM) Weight: 4.5 lbs (2.04 kg) Overall Length: 8.25 in (209 mm) Avg.Air Consumption: 4 (CFM) Sound Level: 89 (dBA) Air Flow Pressure: 90 - 120 (psi) Air Inlet: 1/4" NPT 2 Year Warranty Parts & Labor

AC1200-K$213.20

1/2” AIRCAT Durable Twin Hammer Mechanism Rugged & Reliable Twin Hammer mechanism creates faster blow per

minute Durable Assembled in U.S.A Patented through the handle exhaust (keeps debris away from face)

Easy operation Flip lever Forward & Reverse Working Torque: 200-700 (ft-lbs) Blows Per Minute: 1,300 (BPM - Under Load) Free Speed: 8,000 (RPM) Weight: 4.5 lbs (2.04 kg) Overall Length: 7.5 in (190 mm) Avg.Air Consumption: 4 (CFM) Sound Level: 89 (dBA) Air Flow Pressure: 90 - 120 (psi) Air Inlet: 1/4" 1-Year Parts & Labor Limited Warranty

AC1000-TH$166.40

Strongest Mini 1/2 in its Class! The Hard Hitting Twin Hammer mechanism creates a reliable high torque initial impact. All NITROCAT models are suited for heavy duty work. Durable Composite Housing with Ergonomically Designed Handle Patented through the handle exhaust to keep debris away from face

Loosening Torque: 700 (ft-lbs) Working Torque: 200-500 (ft-lbs) Blows Per Minute: 1,750 (BPM -Under Load) Free Speed: 10,000 (rpm) Weight: 2.9 lbs (1.22 kg) Overall Length: 6 in (152 mm) Avg.Air Consumption: 4 (CFM) Sound Level: 89 (dBA) Air Inlet: 1/4" NPT Air Flow Pressure: 90 - 120 (psi) 1-Year Parts & Labor Limited Warranty

AC1375-XL$180.96

Strongest 3/8" Impact in its class! The Hard Hitting Twin Hammer mechanism creates a high torque initial impact. All NitroCat models are suited for heavy duty jobs. Durable Lightweight Composite Housing Ergonomically Designed Handle (reduces operator fatigue) Patented through the handle exhaust to keep debris away from face Patented Quiet Technology (86 decibels) Superior Internal Mechanics Patented Easy operation Flip lever

Forward & Reverse Loosening Torque: 700 (ft-lbs) Working Torque: 100-400 (ft-lbs) Blows Per Minute: 1,750 (BPM - Under Load) Free Speed: 10,000 (RPM) Weight: 2.7 lbs (1.22 kg) Overall Length: 6.75 in (171 mm) Avg.Air Consumption: 4 (CFM) Air Inlet: 1/4" NPT Air Flow Pressure: 90 - 120 (psi) 1-Year Parts & Labor Limited Warranty

AC1355-XL$174.20

3/8” Super Clutch Twin Hammer Mechanism Impact

Patented Quiet Technology (86 decibels) Patented through the handle exhaust (keeps debris away from face) Patented Easy Operation Flip lever

Forward & Reverse Working Torque: 50-350 (ft-lbs) Blows Per Minute: 1650 (BPM - Under Load) Free Speed: 10,000 (rpm) Weight: 2.6 lbs (1.18 kg) Overall Length: 6.75 in (171 mm) Avg.Air Consumption: 4 (CFM) Air Flow Pressure: 90 - 120 (psi) Air Inlet: 1/4" NPT 1-Year Parts & Labor Limited Warranty

AC1300-TH$161.20

AC1460-XL$132.60

AC1460-XL-2$143.00

AC1350-XL$156.00

AC1680-6$340.60

AC1777$343.20

3/8” Impact Wrench The NITROCAT 1355-XL is a no non-sense, hard-hitting 3/8” impact wrench that incorporates the Twin Hammer mecha-nism. All NITROCAT models are suited for heavy duty (frame work, medium to heavy duty trucks) Durable Composite Housing with Ergonomically Designed Handle Patented through the handle exhaust to keep debris away from face Loosening Torque: 500 (ft-lbs) Working Torque: 140-400 (ft-lbs) Free Speed: 10,000 (rpm) Weight: 3.15 lbs 1-Year Parts & Labor Limited Warranty

Extreme Duty 3/4” Industrial Grade Aluminum Impact Wrench w/6” Anvil

Loosening Torque: 1,600 (ft-lbs) Working Torque: 200-1200 (ft-lbs) Blows Per Minute: 950 (BPM - Under Load) Free Speed: 4,500 (RPM) Weight: 15lbsSound Level: 86 (dBA) Air Flow Pressure: 90 - 120 (psi) 1-Year Parts & Labor Warranty

1/2” Impact Wrench Twin HammerMax Torque: 750 (ft-lbs) Working Torque: 100-670 (ft-lbs) Free Speed: 9000 (rpm) Weight: 4.7 lbs Rugged Steel Hammer Case DesignFull Body Cover for ProtectionReated to run at 125 PSI1-Year Parts & Labor Limited Warranty

1/2” Impact Wrench w/2” Anvil

Twin HammerMax Torque: 750 (ft-lbs) Working Torque: 100-670 (ft-lbs) Free Speed: 9000 (rpm) Weight: 4.7 lbs Rugged Steel Hammer Case DesignFull Body Cover for ProtectionReated to run at 125 PSI1-Year Parts & Labor Limited Warranty

3/4” Brushed Aluminum Impact Wrench

Twin HammerLoosening Torque: 1,400 (ft-lbs) Working Torque: 200-1200 (ft-lbs) Free Speed: 7000 (RPM) Weight: 7.5lbsRugged Steel Hammer CaseErgonomic Handle Design1-Year Parts & Labor Warranty

More 1” Aircat Impact Wrenches on the Next Page!

Page # 18 Catalog T Buzzard Gulch, Inc. 800-821-2932

FLORIDA PNEUMATIC

170-1800 ft/lbs Torque•4800 RPM•87 dBa.•25.1 Lbs.•

AC1840“Super-Industrial” 1”

Pinless Hammer w/ 8” Anvil

Wrench Features320 ft/lbs torque •Total weight only 2.8 lbs •Twin Hammer•12,000 rpm•8 cfm •Twin Hammer•Magnesium/Composite•

FP-7473/8” Light Impact Wrench

$156.00

Features20,000 RPM •1/3 HP Motor•5-1/2” Long•4 cfm•No Stall Motor•Comfort Grip•1.5 Lbs•USA Made•

FP-3751R1/4” Air Die Grinder

$86.32

Features25,000 RPM •1.25 Lbs•6” Long, 90 Degree Angle Head•4 cfm•Rear Exhaust•Ball Bearing Motor•Comfort Grip•

FP-759R-21/4” Air Die Grinder

$208.00

Features25,000 RPM •1/3 HP Motor•6” Long•4 cfm•Front Exhaust•Heavy Duty Bearings•.8 Lbs•

FP-7511/4” Air Die Grinder

$39.00


$55.12Features

22,000 RPM •1/3 HP Motor•4 7/8” Long•4 cfm•Front Exhaust•90 Degree Angle Head•1 Lbs•

Features22,000 RPM •1/2 HP Motor•6.75” Long•6 cfm•Rear Exhaust•Lock Off Throddle•


$47.84

Features2200 bpm•4.6” Stroke•0.498 Shank•Teasing Trigger•Drives King Pins•7 cfm•

FP-660A.498 SHANK AIR HAMMER

$304.20

FP-743A1/2” Impact Wrench

$111.28Wrench Features

600 ft/lbs torque •4.5 lbs •Twin Hammer•Composite Case•7000 rpm•6 cfm •

Features200 RPM •65 ft lbs torque•10.5” Long•4 cfm•Unique Variable Speed Throttle•Soft Touch Grip•

FP-730A3/8” Air Ratchet

$68.90

CHICAGOPNEUMATIC

CP734HExtra Heavy Duty

1/2” IMPACT WRENCH

3.75 cfm375 ft lbs torque425 ft lbs reversewk torque 25-310wgt. 5.25 lbs.

$184.44

CP772HHeavy Duty

3/4” IMPACT WRENCH

6 cfm1000 ft lbs torquewk torque 150-700wgt. 10.5 lbs.

$419.61

CP8544” Angle Air

Grinder

3/8-24 spindle12,000 rpm3.75 lbs.24 cfm

$282.05

CP872General Duty Die Grinder

$61.571/4” collet size22,000 rpm1.25 lbs.26 cfm

CP875Mini Angle Die

Grinder

$57.801/4” collet size22,500 rpm1 lbs.22 cfm

CP77633/4” Super Duty Impact

wrench1200 ft Ibs6300 RPM11.57 Ibs

$434.64

AIRCAT AIR TOOLS1 Year Parts and Labor Limited Warrenty!

$436.80

AC1840-11” Pinless Hammer

2300 ft/lbs Loosening Torque•170/2300 ft/lbs Working •Torque Weighs 33.5 lbs •4800 rpm•900 bpm•

$431.60

$322.40

AC800R1/4” Ratchet

AC43383/8” Reversable

Drill

AC44501/2” Reversible

Drill

AC6200“Mini” 1/4” Straight Die

Grinder

AC62551/4” Angle Die

Grinder

AC802RStrongest 3/8” Ratchet in its

class!

AC65053” Composite Cut-

off Tool

AC65203” Reversibale

Cut-off Tool

AC5100Composite Air Hammer with Blow Mold Kit

Single Pawl Mechanism•5-35 ft/lbs Working Torque•380 RPM•85 dBa.•1.6 Lbs. •

1800 RPM•Jacobs Chuck•Ergonomic Handle•Feather Trigger•82 dBa.•2.9 Lbs.•4 cfm•

400 RPM•Keyed Chuck•Erognomic Handle•Side Handle•Feather Trigger•82 dBa.•4.2 Lbs.•4 cfm•

Features20,000 RPM•82 dBa.•1.8 Lbs.•

18000 RPM•Double Front Bearings Extend •LifeReverse Switch in Handle for •Instant Change in DirectionSpeed Control Regulator •under Throttle Level Adds Control

$83.20

$85.80

$65.00

$93.60

$78.00

$91.00

$65.00$72.80

3000 Blows Per •Minute5 Piece Chisel Set•Quick Change •Retainer3.5 Lbs. •

Twin Pawl Mechanism•5-70 ft/lb Working Torque•90 ft/lbs Loosening •Torque280 RPM•85 dBa.•2.8 Lbs. •

20,000 RPM•Direct Gear Mechanism•Rear Exhaust•79 dBa.•0.9 Lbs•7.8 cfm•

20,000 RPM•Angle Gear Mechanism•Rear Exhaust Design•85 dBa.•1.1 Lbs.•7.8 cfm•

$109.20

AC19001” “Super Duty” Impact Wrench

8” Anvil Length•1900 ft/lbs Loosening Torque•170-1580 ft/lbs working •torque4800 RPM•900 BPM•22.1 lbs•12 cfm•

$481.00

170-1800 ft/lbs Torque•4800 RPM•87 dBa.•29.1 Lbs.•

AC19941” Aluminum

Pinless Hammer w/8” Anvil

Low Vibration Air Hammer

2800 bpm3” stroke

3/4” bore dia.401 shank

3.4 lbs

1/4” Medium Die Grinder

22,000 rpmBuilt in Regulator

1.2 lbs 4 cfm

Sunex 3/8” Butterfly

75 Ft. Lbs torque

30-60 working10,000 rpm

2.5 lbs. $52.00

4” Air GrinderSprindle 3/8-246 cfm

11,000 rpm3.6 lbs.

SX111

$167.70

SUNEX AIR TOOLS--NEW DESIGN-GREAT VALUE

Sunex 3/8” Air Impact Wrench

300 Ft. Lbs torque


2.75 lbs. $156.00SX4335


75 Ft. Lbs torque


2.6 lbs. $59.80SX821A


750 Ft. Lbs torque


4.3 lbs. $161.20SX4345

Grease Guns for Air Tools w/Zerks

Sunex 1/2” Air Impact Wrench800 Ft. Lbs torque1300 Bolt Busting

Torque50-600 working

7,500 rpm4.2 lbs. $206.70

SX4348


1,400 Ft. Lbs torque

200-1100 working5,500 rpm7.55 lbs. $364.00

SX4355

1” Air Impact Wrench W/6”

ANVIL1600 Ft. Lbs torque200-1300 working

6,000 rpm

15.9 lbs. $617.50SX4360-6

1” Air Impact Wrench W/6”

ANVIL1600 Ft. Lbs

torque100-1200 working

4,000 rpm26.2 lbs. $349.70

SX556-6

Sunex 3/8” Air Ratchet

Zero Reaction70 Ft. Lbs torque

10-60 working500 rpm2.8 lbs. $162.50

SX3835

4-1/2” Air GrinderSprindle 5/8” - 11

1.3 hp5 cfm11,000 rpm

4 lbs. $179.40

1/4” Quiet Composite Die Grinder

25,000 rpm.9 lbs3 cfm

$57.20SX5201

1/4” Mini DieGrinder

25,000 rpmBuilt in Regulator

.8 lbs 4 cfm

$23.40SX231B

$41.60SX230B

1/4” Mini Angle Die Grinder20,000 rpm

.25 Hp1 lbs 4 cfm

$46.80SX264

3” Reversible Cut-Off Tool18,000 rpm

Reversible spark direction at 18000 rpm2 lbs 3.6 cfm

$76.70SX6210Pistol Grip

Needle Scaler1/8” Hardened Steel

Needles3,000 bpm19 needles

5.7 lbs 10cfm$58.50SX246

SX280$63.70

3/16” Punch-Flange Tool

Cutting Capac-ity: .05 MetalHole Punch:

3/16”Wgt. 2.9 lbs

1 Yr warranty

$83.20SX9200


SX211A

SX5245

1 Lb. Grease for Air Tools with

Metal Housing w/Zerks

IRR000A2228 $14.88$21.88 IR100 1 LB

1 Lb. Grease for Air Tools with Com-

posite Housing or Titanium Tools

Oil/Grease Kit for Angle Die Grinders, Sanders

and PolishersIncludes:Grease Gun, Tube of Grease, Bottle

of Oil

Oil/Grease Kit for Poly and Titanium Housing

Air ToolsIncludes: Grease Gun, Tube of Grease, Bottle

of Oil

Oil/Grease Kit for Metal Housing Air

ToolsIncludes: Grease Gun, Tube of Grease, Bottle

of Oil IR105-LBK1 IR115-LBK1 IR67-LBK1

IR115 1 LB

$7.37

$35.00 $35.00 $28.88IR105-4

Tube of 105 Grease for kit above $10.95

IR105-4T-6Case of 6 $57.75

IR115-4Tube of 105 Grease for kit above $10.95

IR115-4T-6Case of 6 $57.75

IRGTH-1Grease Gun

for Tubes of IR Grease $16.63

IR10GGallon of IRAir Tool Oil

$35.88

IR10PPint of IR

Air Tool Oil$7.88

IR10Z44 OZ Bottle of IR

Air Tool Oil$4.38

$21.00

AF1030

Water/Oil Seperator 1/4 npt removes dust/oil/water

MVL080Marvel Ait Tool

Oil 4 FL OZ Bottles$2.94

MVL085Marvel Ait Tool

Oil 32 FL OZ Bottle$8.65

INGERSOLL RAND RETAINING RINGS AND

O-RINGS FOR ANY IMPACTRETAINING RINGS

IR1702-425 3/8” $3.00IR2135-425A 1/2” $4.50

IR2145-K425 3/4” $10.50IR2190SRK1 1” $15.00

O-RINGS RINGSIR1702-426 3/8” $3.00IR231-R1A159 1/2” $3.00

IR2145-K425 3/4” KITIR2190SRK1 1” KIT

47.23 52.51 52.73 53.31 53.41 53.43 54.86 57.16 57.80 58.46 58.91 66.91 69.43 80.29 83.42 83.44 88.18 92.56 97.24 109.55 129.01 129.01 138.49 138.49 147.85 163.78 181.06 217.66 253.12 293.02 341.91 388.68

1” INDIVIDUAL SOCKETSWRIGHT

35.60 35.98 35.98 36.55 36.55 37.23 37.23 37.96 37.96 37.96 38.10 38.10 38.19 45.48 45.48 50.61 52.99 56.65 57.05 63.54 68.22 69.92 82.44 84.22 87.48 89.77 117.42 119.63 137.18 150.96 164.58 170.05 173.41 188.25 190.10 198.82 205.28 224.38 225.16 231.48 263.31

3/4” WR882413/16” WR88267/8” WR882815/16” WR88301” WR88321-1/16” WR88341-1/8” WR88361-3/16” WR88381-1/4” WR88401-5/16” WR88421-3/8” WR88441-7/16” WR88461-1/2” WR88481-9/16” WR88501-5/8” WR88521-11/16” WR88541-3/4” WR88561-13/16” WR88581-7/8” WR88601-15/16” WR88622” WR88642-1/16” WR88662-1/8” WR88682-3/16” WR88702-1/4” WR88722-5/16” WR88742-3/8” WR88762-7/16” WR88782-1/2” WR88802-9/16” WR88822-5/8” WR88842-11/16” WR88862-3/4” WR88882-13/16” WR88902-7/8” WR88922-15/16” WR8894 3” WR88963-1/8” WR88973-1/4” WR8897A3-3/8” WR88983-1/2” WR8899

WR6901 3/4”F x 1”MSX4300 3/4”F x 1”MGP3009AB 3/4”F X 1”M (Ball)

1” INDIVIDUAL SOCKETS GP

19 WR88-1921 WR88-2122 WR88-2223 WR88-2324 WR88-2426 WR88-2627 WR88-2728 WR88-2829 WR88-2930 WR88-3032 WR88-3233 WR88-3334 WR88-3435 WR88-3536 WR88-3637 WR88-3738 WR88-3841 WR88-4142 WR88-4243 WR88-4346 WR88-4647 WR88-4748 WR88-4850 WR88-5052 WR88-5254 WR88-5455 WR88-5556 WR88-5658 WR88-5860 WR88-6065 WR88-6570 WR88-70

3/4” WR892413/16” WR89267/8” WR892815/16” WR89301” WR89321-1/16” WR89331-1/8” WR89361-3/16” WR89381-1/4” WR89391-5/16” WR89421-3/8” WR89441-7/16” WR89461-1/2” WR89481-9/16” WR89501-5/8” WR89521-11/16” WR89541-3/4” WR89561-13/16” WR89581-7/8” WR89601-15/16” WR89622” WR89642-1/16” WR89662-1/8” WR89682-3/16” WR89702-1/4” WR89722-5/16” WR89742-3/8” WR89762-7/16” WR89782-1/2” WR89802-9/16” WR89812-5/8” WR89842-3/4” WR8988

23 WR89-2324 WR89-2427 WR89-2728 WR89-2830 WR89-3032 WR89-3233 WR89-3334 WR89-3435 WR89-3536 WR89-3637 WR89-3738 WR89-3841 WR89-4142 WR89-4243 WR89-4346 WR89-4647 WR89-4750 WR89-5052 WR89-5255 WR89-5560 WR89-6065 WR89-6570 WR89-70

WRIGHT 1” REGULAR/ IMPACT WRIGHT 1” DEEP/IMPACT

35.60 35.81 35.81 36.55 36.55 36.55 37.23 37.23 37.23 37.96 37.96 37.96 37.96 38.10 38.10 38.10 38.19 45.48 50.61 50.61 56.65 56.65 61.39 68.22 69.92 82.44 84.22 87.48 89.79 117.42 137.18 173.41

1” METRIC IMPACT REGULAR

SIZE PART PRICE

1” METRIC DEEP IMPACT

SIZE PART PRICE

53.01 53.01 55.50 55.50 56.65 56.65 58.92 58.92 60.86 66.62 66.62 69.02 84.22 84.22 85.97 92.12 96.75 96.75 128.43 137.85 174.13

291.59386.85

SIZE PART PRICE SIZE PART PRICE

WR6800 3/4” Universal JointGP3006UJ 3/4” Universal Joint

WR8800 1” Universal JointGP4006UJ 1” Universal Joint

WR8900 1”F x 3/4”MSX5303 1”F x 3/4”MGP4008AB 1” F X 3/4” M (Ball)

WR6900 3/4”F x 1/2”MSX4301 3/4”F x 1/2”M

GP3008A 3/4”F X 1/2”M (Ball)

GP4003EL 3” X 1” Extension (lock)SX5300 6” X 1” ExtensionGP4007EL 7” X 1” Extension (lock)WR8907 7” x 1” Extension

GP4010EL 10” X 1” Extension (Lock)WR8910 10” x 1” ExtensionSX5310 10” x 1” Extension

WR8913 13” x 1” ExtensionGP4013EL 13” x 1” Extension (Lock)

GP3003EB 3” X 3/4” Extension (Ball)SX4302 6” X 3/4” ExtensionGP3007EB 7” X 3/4” Extension (Ball)WR6907 7” x 3/4” Extension

GP3010EB 10” X 3/4” Extension (Ball)WR6910 10” x 3/4” ExtensionSX4310 10” x 3/4” Extension

GP3013EB 13” X 3/4” Extension (Ball)WR6913 13” x 3/4” ExtensionSX4313 13” x 3/4” Extension

WR6893 13/16 sq x 3/4”GP3313S 13/16 sq x 3/4” GSPGP3315S 15/16 sq x 3/4” GSP

WR8893 13/16 sq x 1”GP4313S 13/16 sq x 1” GSPGP4315S 15/16 sq x 1” GSP

WR6993 13/16 sq x 3/4” DeepGP3313SL 13/16 sq x 3/4” Deep

WR8995 15/16 sq X 1” DeepGP4313SL 13/16 sq x 1” Deep

4 PT SHALLOW SQ BUD SOCKETS

DEEP 4 PT SQ BUD SOCKETS

IMPACT REDUCERS ** no warranty

IMPACT INCREASERS ** no warranty

IMPACT EXTENSIONS

UNIVERSAL JOINTS IMPACT

IMPACT ATTACHMENTS/ACCESSORIES

3/4” & 1” ACCESSORIES

40.5015.1315.61

39.6621.2922.64

59.1425.60

54.1635.34

54.0923.3125.62

26.6014.8016.58

38.8117.0219.20

34.17 37.00 42.18 100.66 51.73 145.00 46.25 182.63 60.22 19.91 22.20 24.44 65.62 34.11 91.57 26.68 41.11 95.22 35.15

84.14 56.63 183.62 69.13


19.9619.9619.9620.2920.2920.6620.6621.0321.3921.4021.4021.7421.7422.1322.7423.6426.5127.5830.1434.0234.6937.9439.8544.3445.2950.1052.5057.5061.4063.9575.0075.0079.6885.1994.8594.8599.09103.58109.59112.65197.27225.74226.13245.70247.46

1” REGULAR/ IMPACT 1” DEEP/IMPACTSIZE PART PRICE SIZE PART PRICE

26.9726.9726.9726.9727.9528.4928.9730.1030.8231.1533.0633.3933.3935.0935.0635.0837.7639.4242.6645.4053.8455.0062.3862.3864.7770.4577.3384.2785.4193.92101.73106.63108.19126.80130.80146.59154.81158.18160.15182.54271.71303.34330.08365.01368.80

3/4” GP4024D13/16” GP4026D7/8” GP4028D15/16” GP4030D1” GP4032D1-1/16” GP4034D1-1/8” GP4036D1-3/16” GP4038D1-1/4” GP4040D1-5/16” GP4042D1-3/8” GP4044D1-7/16” GP4046D1-1/2” GP4048D1-9/16” GP4050D1-5/8” GP4052D1-11/16” GP4054D1-3/4” GP4056D1-13/16” GP4058D1-7/8” GP4060D1-15/16” GP4062D2” GP4064D2-1/16” GP4066D2-1/8” GP4068D2-3/16” GP4070D2-1/4” GP4072D2-5/16” GP4074D2-3/8” GP4076D2-7/16” GP4078D2-1/2” GP4080D2-9/16” GP4082D2-5/8” GP4084D2-11/16” GP4086D2-3/4” GP4088D2-13/16” GP4090D2-7/8” GP4092D2-15/16” GP4094D3” GP4096D3-1/8” GP4100D3-1/4” GP4104D3-3/8” GP4108D3-1/2” GP4112D3-5/8” GP4116D3-3/4” GP4120D3-7/8” GP4124D4” GP4128D

1” INDIVIDUAL METRIC SOCKETS GP

1” METRIC REGULAR/ IMPACT 1” METRIC DEEP/IMPACT

19 GP4019M20 GP4020M21 GP4021M22 GP4022M23 GP4023M

24 GP4024M 25 GP4025M 26 GP4026M 27 GP4027M 28 GP4028M 29 GP4029M 30 GP4030M 31 GP4031M 32 GP4032M 33 GP4033M

34 GP4034M 35 GP4035M 36 GP4036M

37 GP4037M 38 GP4038M

39 GP4039M 40 GP4040M 41 GP4041M 42 GP4042M 43 GP4043M

44 GP4044M45 GP4045M

46 GP4046M47 GP4047M48 GP4048M

50 GP4050M51 GP4051M

52 GP4052M53 GP4053M

54 GP4054M 55 GP4055M 56 GP4056M

57 GP4057M 58 GP4058M 60 GP4060M

62 GP4062M 63 GP4063M

65 GP4065M67 GP4067M70 GP4070M

22.9022.9022.9023.1323.1323.5723.5723.5723.5724.0124.0124.0124.0124.0124.0124.9424.9425.5925.7025.8325.8325.9925.9928.4928.4929.1431.3832.3932.8435.2238.5238.9240.4640.8541.7046.1449.5449.8651.6257.4260.7260.7264.7570.0880.33

SIZE PART PRICE

28.5128.6928.9729.5330.1030.6730.6730.7830.7830.8830.8830.8830.8830.8831.1532.8033.1333.1733.2133.3234.6534.7134.7139.8743.9743.9743.9743.9744.8445.1654.0455.3556.1558.9459.3563.6264.2370.6073.5980.18

100.73100.73100.73113.70113.70

19 GP4019MD20 GP4020MD21 GP4021MD22 GP4022MD

23 GP4023MD 24 GP4024MD 25 GP4025MD26 GP4026MD

27 GP4027MD 28 GP4028MD 29 GP4029MD 30 GP4030MD 31 GP4031MD32 GP4032MD

33 GP4033MD34 GP4034MD

35 GP4035MD 36 GP4036MD37 GP4037MD38 GP4038MD39 GP4039MD40 GP4040MD

41 GP4041MD 42 GP4042MD 43 GP4043MD44 GP4044MD45 GP4045MD

46 GP4046MD47 GP4047MD48 GP4048MD

50 GP4050MD51 GP4051MD

52 GP4052MD53 GP4053MD54 GP4054MD

55 GP4055MD 56 GP4056MD57 GP4057MD58 GP4058MD

60 GP4060MD62 GP4062MD63 GP4063MD

65 GP4065MD67 GP4067MD70 GP4070MD

WR6991 1-1/2” Hex x 13/16 3/4” DriveSX4826C 1-1/2” Hex x 13/16 3/4” DriveGP3223C 1-1/2” Hex x 13/16 3/4” Drive

WR8991 1-1/2” Hex x 13/16 1” DriveSX5826C 1-1/2” Hex x 13/16 1” DriveGP4223C 1-1/2” Hex x 13/16 1” Drive

COMBINATION DEEP 4 PT SQ BUD SOCKETS

58.84

28.67

34.48

90.81

36.08

41.61

S-K = S-KLIFETIME WARRANTY

IR=Ingersoll RandLifetime Warranty

WR=WRIGHT INDUSTRIAL

LIFETIME WARRANTYGP=GREY Pneumatic

Lifetime Warranty

27.75 27.75 27.75 27.75 32.38 34.23 35.15 37.00 37.00 37.00 37.00 37.93 37.93 39.78 39.78 39.78 39.78 41.63 44.40 47.18 56.43 62.90 62.90 62.90 76.78 85.10 86.03 87.88 93.43 104.53 111.00 131.35 147.08 150.78 158.18 172.98 179.45 183.15 229.40 292.30 318.20 374.63 429.20 481.93 533.73 586.45 649.35 697.45 748.33

19.43 19.43 19.43 19.43 19.43 20.35 20.35 20.35 20.35 21.28 22.20 22.20 22.20 23.13 24.05 25.90 28.68 29.60 30.53 32.38 33.30 37.00 38.85 41.63 41.63 44.40 49.03 52.73 56.43 59.20 65.68 67.53 74.00 78.63 86.95 92.50 97.13 100.83 107.30 110.08 112.85 262.70 258.08 306.18 318.20 359.83 407.93 419.95 437.53

SIZE PART PRICE

1” INDIVIDUAL SOCKETSINGERSOLL RAND

3/4” GP4024R13/16” GP4026R7/8” GP4028R15/16” GP4030R1” GP4032R1-1/16” GP4034R1-1/8” GP4036R1-3/16” GP4038R1-1/4” GP4040R1-5/16” GP4042R1-3/8” GP4044R1-7/16” GP4046R1-1/2” GP4048R1-9/16” GP4050R1-5/8” GP4052R1-11/16” GP4054R1-3/4” GP4056R1-13/16” GP4058R1-7/8” GP4060R1-15/16” GP4062R2” GP4064R2-1/16” GP4066R2-1/8” GP4068R2-3/16” GP4070R2-1/4” GP4072R2-5/16” GP4074R2-3/8” GP4076R2-7/16” GP4078R2-1/2” GP4080R2-9/16” GP4082R2-5/8” GP4084R2-11/16” GP4086R2-3/4” GP4088R2-13/16” GP4090R2-7/8” GP4092R2-15/16” GP4094R3” GP4096R3-1/8” GP4100R3-1/4” GP4104R3-3/8” GP4108R3-1/2” GP4112R3-5/8” GP4116R3-3/4” GP4120R3-7/8” GP4124R4” GP4128R

IR 1” REGULAR/ IMPACT IR 1” DEEP/IMPACTSIZE PART PRICE SIZE PART PRICE

3/4” 13/16” 7/8” 15/16” 1” 1-1/16” 1-1/8” 1-3/16” 1-1/4” 1-5/16” 1-3/8” 1-7/16” 1-1/2” 1-9/16” 1-5/8” 1-11/16” 1-3/4” 1-13/16” 1-7/8” 1-15/16” 2” 2-1/16” 2-1/8” 2-3/16” 2-1/4” 2-5/16” 2-3/8”2-7/16” 2-1/2” 2-9/16” 2-5/8” 2-11/16” 2-3/4” 2-13/16” 2-7/8” 2-15/16” 3” 3-1/8” 3-1/4” 3-3/8” 3-1/2” 3-5/8” 3-3/4” 3-7/8” 4” 4-1/8” 4-1/4”4-3/8”4-1/2”

IRS68H34IRS68H1316IRS68H78IRS68H1516IRS68H1IRS68H1-116IRS68H1-18IRS68H1-316IRS68H1-14IRS68H1-516IRS68H1-38IRS68H1-716IRS68H1-12IRS68H1-916IRS68H1-58IRS68H1-1116IRS68H1-34IRS68H1-1316IRS68H1-78IRS68H1-1516IRS68H2IRS68H2-116IRS68H2-18IRS68H2-316IRS68H2-14IRS68H2-516IRS68H2-38IRS68H2-716IRS68H2-12IRS68H2-916IRS68H2-58IRS68H2-1116IRS68H2-34IRS68H2-1316IRS68H2-78IRS68H2-1516IRS68H3IRS68H3-18IRS68H3-14IRS68H3-38IRS68H3-12IRS68H3-58IRS68H3-34IRS68H3-78IRS68H4IRS68H4-18IRS68H4-14IRS68H4-38IRS68H4-12

3/4” 13/16” 7/8” 15/16” 1” 1-1/16” 1-1/8” 1-3/16” 1-1/4” 1-5/16” 1-3/8” 1-7/16” 1-1/2” 1-9/16” 1-5/8” 1-11/16” 1-3/4” 1-13/16” 1-7/8” 1-15/16” 2” 2-1/16” 2-1/8” 2-3/16” 2-1/4” 2-5/16” 2-3/8”2-7/16” 2-1/2” 2-9/16” 2-5/8” 2-11/16” 2-3/4” 2-13/16” 2-7/8” 2-15/16” 3” 3-1/8” 3-1/4” 3-3/8” 3-1/2” 3-5/8” 3-3/4” 3-7/8” 4” 4-1/8” 4-1/4”4-3/8”4-1/2”

IRS68H34LIRS68H1316LIRS68H78LIRS68H1516LIRS68H1LIRS68H1-116LIRS68H1-18LIRS68H1-316LIRS68H1-14LIRS68H1-516LIRS68H1-38LIRS68H1-716LIRS68H1-12LIRS68H1-916LIRS68H1-58LIRS68H1-1116LIRS68H1-34LIRS68H1-1316LIRS68H1-78LIRS68H1-1516LIRS68H2LIRS68H2-116LIRS68H2-18LIRS68H2-316LIRS68H2-14LIRS68H2-516LIRS68H2-38LIRS68H2-716LIRS68H2-12LIRS68H2-916LIRS68H2-58LIRS68H2-1116LIRS68H2-34LIRS68H2-1316LIRS68H2-78LIRS68H2-1516LIRS68H3LIRS68H3-18LIRS68H3-14LIRS68H3-38LIRS68H3-12LIRS68H3-58LIRS68H3-34LIRS68H3-78LIRS68H4LIRS68H4-18LIRS68H4-14LIRS68H4-38LIRS68H4-12L

17MM S66M1718MM S66M1819MM S66M1920MM S66M2021MM S66M2122MM S66M2223MM S66M2324MM S66M2425MM S66M2526MM S66M2627MM S66M2728MM S66M2829MM S66M2930MM S66M3031MM S66M3132MM S66M3233MM S66M3334MM S66M3435MM S66M3536MM S66M3637MM S66M3738MM S66M3840MM S66M4041MM S66M4142MM S66M4243MM S66M4344MM S66M4446MM S66M4650MM S66M50

3/4” individual impact sockets 3/4” REGULAR/ IMPACT

1/2” -----------9/16” WR68185/8” WR682011/16” WR68223/4” WR682413/16” WR68267/8” WR682815/16” WR68301” WR68321-1/16” WR68341-1/8” WR68361-3/16” WR68381-1/4” WR68401-5/16” WR68421-3/8” WR68441-7/16” WR68461-1/2” WR68481-9/16” WR68501-5/8” WR68521-11/16” WR68541-3/4” WR68561-13/16” WR68581-7/8” WR68601-15/16” WR68622” WR68642-1/16” WR68902-1/8” WR68922-3/16” WR68942-1/4” WR68962-3/8” WR6898

--------- 21.56 22.03 22.03 22.32 22.32 22.74 23.00 23.62 25.39 25.85 27.17 27.17 29.9431.8532.6932.6934.9935.21 36.43 37.67 37.67 42.23 44.21 51.5752.6157.8863.7170.1177.11

3/4” DEEP/ IMPACT

1/2” ----------9/16” WR69185/8” WR692011/16” WR69223/4” WR692413/16” WR69267/8” WR692815/16” WR69301” WR69321-1/16” WR69341-1/8” WR69361-3/16” WR69381-1/4” WR69401-5/16” WR69421-3/8” WR69441-7/16” WR69461-1/2” WR69481-9/16” WR69501-5/8” WR69521-11/16” WR69541-3/4” WR69561-13/16” WR69581-7/8” WR69601-15/16” WR69622” WR69642-1/8” WR6968

17 WR68-17 18 WR68-1819 WR68-1920 WR68-2021 WR68-2122 WR68-2223 WR68-2324 WR68-2426 WR68-2627 WR68-2728 WR68-2829 WR68-2930 WR68-3031 WR68-3132 WR68-3233 WR68-3334 WR68-3435 WR68-3536 WR68-3638 WR68-3840 WR68-4041 WR68-4142 WR68-4243 WR68-4346 WR68-4650 WR68-50

22.32 21.66 22.32 22.74 22.74 22.74 23.62 23.62 23.62 25.39 25.39 25.85 25.85 26.20 27.17 29.94 30.88 31.85 32.25 32.69 34.21 35.21 36.42 36.42 37.67 51.57

3/4” METRIC IMPACT REGULAR

19 WR69-1921 WR69-2122 WR69-2223 WR69-2324 WR69-2426 WR69-2627 WR69-2730 WR69-3031 WR69-3132 WR69-3233 WR69-3334 WR69-3435 WR69-3536 WR69-3638 WR69-3841 WR69-4143 WR69-4346 WR69-4650 WR69-50

3/4” METRIC DEEP IMPACT SOCKETS

SIZE PART PRICE

wright usa1/2” GP3016R9/16” GP3018R5/8” GP3020R11/16” GP3022R3/4” GP3024R13/16” GP3026R7/8” GP3028R15/16” GP3030R1” GP3032R1-1/16” GP3034R1-1/8” GP3036R1-3/16” GP3038R1-1/4” GP3040R1-5/16” GP3042R1-3/8” GP3044R1-7/16” GP3046R1-1/2” GP3048R1-9/16” GP3050R1-5/8” GP3052R1-11/16” GP3054R1-3/4” GP3056R1-13/16” GP3058R1-7/8” GP3060R1-15/16” GP3062R2” GP3064R2-1/16” GP3066R2-1/8” GP3068R2-3/16 GP3070R2-1/4” GP3072R2-5/16” GP3074R2-3/8” GP3076R2-7/16” GP3078R2-1/2” GP3080R

SIZE PART PRICE

greY gp sockets

SIZE PART PRICE

wright usaSIZE PART PRICE

greY gp sockets 31.16 31.16 31.16 31.55 31.77 32.09 32.33 32.55 34.08 34.21 41.27 41.34 45.65 51.06 51.06 54.48 54.48 55.59 55.75 56.41 56.41 61.80 62.30 62.46 65.34

1/2” GP3016D9/16” GP3018D5/8” GP3020D11/16” GP3022D3/4” GP3024D13/16” GP3026D7/8” GP3028D15/16” GP3030D1” GP3032D1-1/16 GP3034D1-1/8” GP3036D1-3/16” GP3038D1-1/4” GP3040D1-5/16” GP3042D1-3/8” GP3044D1-7/16” GP3046D1-1/2” GP3048D1-9/16” GP3050D1-5/8” GP3052D1-11/16” GP3054D1-3/4 “ GP3056D1-13/16” GP3058D1-7/8” GP3060D1-15/16” GP3062D2” GP3064D2-1/16” GP3066D2-1/8” GP3068D2-3/16” GP3070D2-1/4” GP3072D2-5/16” GP3074D2-3/8” GP3076D2-7/16” GP3078D2-1/2” GP3080D

15.7615.7615.7615.7615.7615.7615.7615.7615.8916.8716.8716.8717.7220.9821.1521.4824.4425.3126.1828.6029.8031.6231.5634.1134.3548.9052.4158.2459.5064.8872.0673.4675.81

17 -----------19 GP3019M20 GP3020M21 GP3021M22 GP3022M23 GP3023M24 GP3024M25 GP3025M26 GP3026M27 GP3027M28 GP3028M29 GP3029M30 GP3030M31 GP3031M32 GP3032M33 GP3033M34 GP3034M35 GP3035M36 GP3036M38 GP3038M40 GP3040M41 GP3041M42 GP3042M43 GP3043M44 GP3044M46 GP3046M50 GP3050M

--------10.6410.6410.6410.6410.6410.6410.6410.6410.6410.6411.8011.8211.8212.2112.8612.9313.5813.6213.8018.6721.1322.5023.7426.0328.8629.97

19 GP3019MD20 GP3020MD21 GP3021MD22 GP3022MD23 GP3023MD24 GP3024MD25 GP3025MD26 GP3026MD27 GP3027MD28 GP3028MD29 GP3029MD30 GP3030MD31 GP3031MD32 GP3032MD33 GP3033MD34 GP3034MD35 GP3035MD36 GP3036MD38 GP3038MD40 GP3040MD41 GP3041MD42 GP3042MD43 GP3043MD44 GP3044MD46 GP3046MD50 GP3050MD

16.8716.8716.8716.8716.8716.8716.8717.4817.9118.0718.6718.6718.6721.6322.1622.1622.5523.0323.5527.1227.4929.6232.9333.4334.8543.01

sets on page #

24800-821-2932

Buzzard gulch inc

s-k impact sockets

also availaBle


1/2” S66H129/16” S66H9165/8” S66H5811/16” S66H11163/4” S66H3413/16” S66H13167/8” S66H7815/16” S66H15161” S66H11-1/16” S66H1-1161-1/8” S66H1-181-3/16” S66H1-3161-1/4” S66H1-141-5/16” S66H1-5161-3/8” S66H1-381-7/16” S66H1-7161-1/2” S66H1-121-9/16” S66H1-9161-5/8” S66H1-581-11/16” S66H1-11161-3/4” S66H1-341-13/16” S66H1-13161-7/8” S66H1-781-15/16” S66H1-15162” S66H22-1/16” S66H2-1162-1/8” S66H2-182-3/16” S66H2-3162-1/4” S66H2-142-5/16” S66H2-5162-3/8” S66H2-382-7/16” S66H2-7162-1/2” S66H2-12

12.03 12.03 12.03 12.03 12.95 12.95 12.95 12.95 12.95 12.95 12.95 12.95 13.88 14.80 15.73 16.65 16.65 19.43 22.20 26.83 26.83 28.68 29.60 29.60 32.38 37.00 37.93 40.70 42.55 44.40 48.10 48.10 49.95

SIZE PART PRICE

ingersol rand1/2” S66H12L9/16” S66H916L5/8” S66H58L11/16” S66H1116L3/4” S66H34L13/16” S66H1316L7/8” S66H78L15/16” S66H1516L1” S66H1L1-1/16” S66H1-116L1-1/8” S66H1-18L1-3/16” S66H1-316L1-1/4” S66H1-14L1-5/16” S66H1-516L1-3/8” S66H1-38L1-7/16” S66H1-716L1-1/2” S66H1-12L1-9/16” S66H1-916L1-5/8” S66H1-58L1-11/16” S66H1-1116L1-3/4” S66H1-34L1-13/16” S66H1-1316L1-7/8” S66H1-78L1-15/16” S66H1-1516L2” S66H2L2-1/16” S66H2-116L2-1/8” S66H2-18L2-3/16” S66H2-316L2-1/4” S66H2-14L2-5/16” S66H2-516L2-3/8” S66H2-38L2-7/16” S66H2-716L2-1/2” S66H2-12L

17.5817.5817.5817.5817.5817.5817.5817.5818.5018.5018.5018.5018.5021.2822.2022.2024.0526.8327.7530.5333.3035.1535.1537.9338.8562.9071.2376.7885.1087.8894.3599.90

106.38

ingersol rand

SIZE PART PRICE

SIZE PART PRICE

wright usa greY gp sockets

12.0312.0312.0312.0312.0312.0312.0312.0312.0312.0312.0312.0313.8813.8813.8813.8814.8014.8015.7315.7315.7315.7320.3522.2023.1325.9027.7529.6033.30

ingersol rand wright usa greY gp sockets ingersol rand

17MM S66M17L19MM S66M19L20MM S66M20L21MM S66M21L22MM S66M22L23MM S66M23L24MM S66M24L25MM S66M25L26MM S66M26L27MM S66M27L28MM S66M28L29MM S66M29L30MM S66M30L31MM S66M31L32MM S66M32L33MM S66M33L34MM S66M34L35MM S66M35L36MM S66M36L38MM S66M38L40MM S66M40L41MM S66M41L42MM S66M42L43MM S66M43L44MM S66M44L46MM S66M46L50MM S66M50L

18.5018.5018.5018.5018.5018.5018.5018.5019.4319.4320.3520.3520.3520.3520.3521.2821.2821.2822.2022.2028.6828.6832.3837.0037.9338.8539.78

SIZE PART PRICE SIZE PART PRICE SIZE PART PRICE SIZE PART PRICE SIZE PART PRICE

NEW REDUCING ADAPTORS. LOW PROFILE SLEEVE TYPE

Magnetic Retenion Device Keeps the Adaptor Attached to the Socket. Adaptors can be stacked if addition drive reduction is needed. Designed for impact or hand tools.Includes: 938RA 1/4”-3/8” 1138RA 3/8”-1/2” 2238RA 1/2”-3/4”

GP103RA

$21.94

GP3009RAGP2238RAGP1138RAGP938RAGP912RA

3/4” F - 1” M1/2” F - 3/4”M3/8” F - 1/2”M1/4” F - 3/8”M1/4” F - 1/2”M

Part # Impact/Socket Cost$19.33$12.88$ 6.90$ 6.90$ 6.90

10.64 10.64 10.64 10.64 11.16 11.16 11.16 11.16 11.16 11.16 11.16 11.16 11.95 13.25 13.78 14.50 14.78 20.00 21.26 24.55 25.35 26.90 27.44 28.43 30.67 34.78 36.37 39.05 40.59 42.68 46.36 46.36 47.84

34.36 34.36 34.36 34.36 34.36 36.34 38.92 41.64 43.46 44.76 44.76 46.84 48.25 52.53 59.34 59.34 59.34 59.34 59.34

1/2” Individual IMPACT SOCKETS And ACCESSORIES

S64H516S64H38S64H716S64H12S64H916S64H58S64H1116S64H34S64H1316S64H78S64H1516S64H1S64H1-116S64H1-18S64H1-316S64H1-14S64H1-516S64H1-38S64H1-716S64H1-12

IR 1/2” 6 PTREGULAR/IMPACT

IR 1/2” 6 PTDEEP/IMPACT

SX=Sunex Lifetime Warranty

IR= INGERSOLL RAND LIFETIME WARRANTY

WR=WRIGHT INDUSTRIAL LIFETIME

WARRANTY USA MADE

SocketSize

WRIGHT 1/2” 6 PTREGULAR/IMPACT

------------9.019.019.159.179.67

10.23 10.56 11.03 12.29 13.59 14.33 17.78 19.54 20.26 21.24 22.76 24.79 26.33 28.23

SUNEX 1/2” 6 PTREGULAR/IMPACT

3.703.703.703.703.704.63 4.634.635.555.556.486.488.339.259.25

10.1812.9513.8813.8814.80

2.15 3.00 3.33 3.33 3.33 3.90 3.96 4.05 4.18 4.81 5.49 6.14 6.79 7.34 7.73 7.86 8.16 9.07 9.60 10.18

WRIGHT 1/2” 6 PTDEEP/IMPACT

----------15.4215.9515.9516.7416.7416.7417.8817.8819.7520.2222.2625.3929.5129.7931.7333.0934.5737.2139.19

GP2010DGP2012DGP2014DGP2016DGP2018DGP2020DGP2022DGP2024DGP2026DGP2028DGP2030DGP2032DGP2034DGP2036DGP2038DGP2040DGP2042DGP2044DGP2046DGP2048D

SUNEX 1/2” 6 PTDEEP/IMPACT

5/163/87/161/29/165/811/163/413/167/815/1611-1/161-1/81-3/161-1/41-5/161-3/81-7/161-1/2

7.057.057.057.057.337.298.478.499.429.92

11.9112.8814.2614.3415.3016.6516.7117.7217.7018.67

3.76 5.22 5.35 5.25 5.51 5.61 6.05 6.59 7.16 7.23 9.18 9.31 9.62 11.17 11.38 12.56 13.86 14.26 14.37 17.02

SUNEX 1/2” MM6 PT REG/IMPACT

GP2010RGP2012R GP2014RGP2016RGP2018RGP2020RGP2022RGP2024RGP2026RGP2028RGP2030RGP2032RGP2034RGP2036RGP2038RGP2040RGP2042RGP2044RGP2046RGP2048R

__ __ 9.74 9.93 9.93 10.05 10.05 10.23 10.59 10.59 11.03 11.85 12.95 14.65 15.76 15.76 16.48 16.78 17.34 19.80 19.69 17.19 20.65 __ 22.30 __ __ __ 27.27

____

15.7615.7616.2516.3516.6516.8617.6418.9119.0619.1619.8820.4120.4120.8622.9823.3323.3325.0123.3325.4726.3926.9827.7330.1034.0834.1935.79

N/A3.943.133.293.073.153.203.814.053.903.963.874.054.094.274.615.466.686.426.426.706.777.017.037.107.718.44

10.4510.56

89 101112131415161718192021222324252627282930313233343536

N/AN/AWR49-10MMWR49-11MMWR49-12MMWR49-13MMWR49-14MMWR49-15MMWR49-16MMWR49-17MMWR49-18MMWR49-19MMWR49-20MMWR49-21MMWR49-22MMWR49-23MMWR49-24MMSK34275MMSK34276MMWR49-27MMSK34278MMWR49-29MMWR49-30MMWR49-31MMWR49-32MMSK34283MMWR49-34MMWR49-35MMWR49-36MM

SUNEX 1/2” MM6PT DEEP/IMPACT

N/ASX209MDSX210MDSX211MDSX212MDSX213MDSX214MDSX215MDSX216MDSX217MDSX218MDSX219MDSX220MDSX221MDSX222MDSX223MDSX224MDSX225MDSX226MDSX227MDSX228MDSX229MDSX230MDSX231MDSX232MDSX233MDSX234MDSX235MDSX236MD


WRIGHT 1/2” MM6 PT REG/IMPACT

S64H516LS64H38LS64H716LS64H12LS64H916LS64H58LS64H1116LS64H34LS64H1316LS64H78LS64H1516LS64H1LS64H1-116LS64H1-18LS64H1-316LS64H1-14LS64H1-516LS64H1-38LS64H1-716LS64H1-12L

5/163/87/161/29/165/811/163/413/167/815/1611-1/161-1/81-3/161-1/41-5/161-3/81-7/161-1/2

N/AWR4912WR4914WR4916WR4918WR4920WR4922WR4924WR4926WR4928WR4930WR4932WR4934WR4936WR4938WR4940WR4942WR4944WR4946WR4948

N/AN/AWR48-10MMWR48-11MMWR48-12MMWR48-13MMWR48-14MMWR48-15MMWR48-16MMWR48-17MMWR48-18MMWR48-19MMWR48-20MMWR48-21MMWR48-22MMWR48-23MMWR48-24MMWR48-25MMWR48-26MMWR48-27MMWR48-28MMSK34079WR48-30MMN/AWR48-32MMN/AN/AN/AWR48-36MM

__5.555.355.495.575.575.596.486.606.686.556.737.387.227.297.608.949.819.82

10.0610.1010.4912.1512.6512.9915.7316.3717.2817.32

WRIGHT 1/2” MM6PT DEEP/IMPACT

N/ASX209MSX210MSX211MSX212MSX213MSX214MSX215MSX216MSX217MSX218MSX219MSX220MSX221MSX222MSX223MSX224MSX225MSX226MSX227M SX228M SX229MSX230MSX231MSX232MSX233MSX234MSX235MSX236M

GP - GREY LIFETIME

WARRANTY

WR4800 UNIVERSALSX2300 UNIVERSALGP2229UJ UNIVERSAL

50.0717.5421.90

WR4903WR4905WR4909SX2503SX2505SX2510GP2243EGP2245EGP2247EGP2210E

23.6021.3425.426.058.7917.787.79

11.2518.4323.53

1/2” IMPACT INCREASERS **no warranty

WR4902SX2302GP2238AGP2238AL

1/2” IMPACT REDUCERS ** no warranty

16.376.467.90

10.14

WR4900SX2301GP2228AGP2228AL

1/2” IMPACT UNIVERSAL JOINT

22.088.75

10.9312.95

GP 6PT 1/2 REG/IMPACT

GP 6PT 1/2 DW/IMPACT

N/AWR4812WR4814WR4816WR4818WR4820WR4822WR4824WR4826WR4828WR4830WR4832WR4834WR4836WR4838WR4840WR4842WR4844WR4846WR4848

4.054.054.054.054.055.335.495.335.385.517.187.228.148.588.849.089.34

10.7511.1613.39

SX0210SX0212SX0214SX0216SX0218SX0220SX0222SX0224SX0226SX0228SX0230SX0232SX0234SX0236SX0238SX0240SX0242SX0244SX0246SX0248

SX210DSX212DSX214DSX216DSX218DSX220DSX222DSX224DSX226DSX228DSX230DSX232DSX234DSX236DSX238DSX240DSX242DSX244DSX246D SX248D

6.486.486.486.487.407.407.408.339.25

10.1811.1012.0313.8814.8014.8015.7317.5820.3524.0525.90

SocketSize

1/2”F x 3/4”M 1/2”F x 3/4”M 1/2”F x 3/4”M BALL1/2”F x 3/4”M PIN

1/2”F x 3/8”M1/2”F x 3/8”M1/2”F x3/8”M BALL1/2”F x 3/8”M PIN

IMPACT ACCESSORIES

1/2” X 3”1/2” X 5”1/2” X 10”1/2” X 3”1/2” X 5”1/2” X 10”1/2” X 3”1/2” X 5”1/2” X 7”1/2” X 10”

mm GP2008MGP2009MGP2010MGP2011MGP2012MGP2013MGP2014MGP2015MGP2016MGP2017MGP2018MGP2019MGP2020MGP2021MGP2022MGP2023MGP2024MGP2025MGP2026MGP2027MGP2028MGP2029MGP2030MN/AGP2032MGP2033MGP2034MGP2035MGP2036M

GP 6PT 1/2 MMREG/IMPACT

4.05 4.054.054.054.054.054.055.245.355.355.355.335.385.385.515.487.187.228.148.168.368.588.84

__9.089.349.609.62

11.19

GP2008MDGP2009MDGP2010MDGP2011MDGP2012MDGP2013MDGP2014MDGP2015MDGP2016MDGP2017MDGP2018MDGP2019MDGP2020MDGP2021MDGP2022MDGP2023MDGP2024MDGP2025MDGP2026MDGP2027MDGP2028MDGP2029MDGP2030MDN/AGP2032MDGP2033MDGP2034MDGP2035MDGP2036MD

GP 1/2 MM6 PT DEEP/IMPACT

7.077.077.057.057.057.337.338.498.578.498.578.499.429.429.929.92

11.9112.7813.3614.2614.3414.3415.30

__16.6516.7117.2417.7217.70

SocketSize

METRIC IMPACT SINGLE SOCKETS 6 POINT SHALLOW AND DEEP

GP1311SD11 Pc 1/2” Drive 8 PointDeep Impact Socket Set

$137.62

Includes:GP2516SDGP2518SDGP2520SDGP2522SDGP2524SD

GP2526SDGP2528SDGP2530SDGP2532SDGP2534SDGP2536SD

1/2”9/16”5/8”11/16”3/4”

13/16”7/8”15/16”1”1-1/16”1-1/8”

8 Pt Sockets are also known as

double square or railroad sockets

7.62 8.08 8.99 9.93 14.25

14.74 19.94 21.28 22.53 22.76 26.49

1/2” IMPACT EXTENSIONS

3/8” IMPACT EXTENSIONS


3/8” IMPACT INCREASERS And REDUCERS

12.867.406.598.216.18

WR3899SX3300GP1138AGP1138ALGP1128A

GP1140ESX3503WR3903GP1143EGP1146EWR3906WR3908 GP1152E

6.205.74

17.676.209.45

20.9423.1923.22

GP = GREY - LIFETIME Warranty IR- INGERSOLL RAND LIFETIME Warranty

1/2” - 3/8” REDUCERS-EXTENSIONS-SETS

3/8”F x 1/2”M Ball3/8”F x 1/2”M Ball3/8”F x 1/2”M Ball3/8”F X 1/2”M PIN3/8”F X 1/4” M Ball

IncreaserIncreaserIncreaserIncreaserReducer

3/8” IMPACT UNIVERSAL JOINT

37.1313.8815.39

WR3800SX3301GP1129UJ

WRIGHTSUNEXGP - GREY

BALL STYLEBALL STYLEBALL STYLE

3/8” X 1-3/4”3/8” X 3”3/8” X 3”3/8” X 3”3/8” X 6”3/8” X 6”3/8” X 12”3/8” X 12”

GreySunexWrightGreyGreyWrightWrightGrey

NO WARRANTY

GP11006 Pc 3/8”Adapter

Extension Set

$34.61Includes:3/8” F - 1/4” M3/8” F - 1/2” M3/8” Universal JointExtension: 1-3/4”,3” ,6”

GP22006 Pc 1/2”

Adapter Exten-sion Set

$56.00

Includes:1/2” F - 3/8” M1/2” F - 3/4” M1/2” Universal JointExtension: 3”, 5”, 7”

GP1512DM1/2” SAE/MM 30 Pc

DEEP IMPACT

$151.07

SET INCLUDES:

1/2” Deep Sockets 7/16” - 1-1/4”1/2” Deep MM Sockets 10,11,12,13,14, 15,16,17,18,19,21,22,26,27mmFip Sockets: 3/4 x 13/16 & 19mm x 21mmExtension: 3”

Plastic Carrying Case

GP1328RD28 Pc 1/2” SAE

REG/DW IMPACT

$134.61

SET INCLUDES:

1/2” Deep Sockets: 7/16” - 1-1/4”1/2” Shallow Sockets: 7/16 - 1-1/4”1/2” Universal Joint3” Extension


GP1430MRD1/2” MM 30 Pc

REG/DW IMPACT

$129.98SET INCLUDES:

1/2” Deep MM Sockets 10,11,12,13,14, 15,16,17,18,19,20,21,22,24mm1/2” Shallow MM Sockets: 10,11,12,13, 14,15,16,17,18,19,20,21,22,24mm1/2” Universal SocketExtension: 3”


PIPE PLUG- X-LONG AND OTHER IMPACT SETSWR=WRIGHT INDUSTRIAL LIFETIME WARRANTY SX=Sunex Lifetime Warranty

9 Pc 1” to 2” 8 Pc. 7/8” to 1-1/2 8 Pc. 7/8” to 1-1/213 Pc. 3/4” to 1-1/2”21 Pc. 3/4” to 2”8 Pc. 1-9/16” to 2”8 Pc. 2-1/16” to 2-1/2”16 Pc. 2-1/16” to 3”

7 Pc. 27mm to 41mm10 Pc. 27mm to 50mm 8 Pc. 27mm to 41mm 4 Pc. 27mm to 33mm26 Pc. 19mm to 44mm22 Pc. 28mm to 50mm

$123.75$281.84$152.46$148.49$399.93$242.06 $377.85 $856.65 $519.44 $553.32

IRSK8H8GPC9013RSX5699GP9159GP9021GPC9008RGPC9908RGP9016

GP9026MGPC9022M

8 Pc. 7/8” to 1-1/2 13 Pc. 3/4” to 1-1/2”9 Pc. 1” to 2”9 Pc. 1” to 2”21 Pc. 3/4” to 2”8 Pc. 1-9/16” to 2”8 Pc. 2-1/16” to 2-1/2”16 Pc. 2-1/16” to 3”

26 Pc. 19mm-44mm22 Pc. 28mm to 50mm

6 point1” Deep Impact

SAE and Metric Socket Set

BG101DIRSK8H8LSX5681GPC9013DGP9021DGPC9008DGPC9908DGP9016D

SX5697MBG101DMGP9109DIRSK8M4LGP9026MDGPC9022MD

$149.95$160.05$148.50$372.39$575.09$323.00$515.721236.84 $146.85 $169.95 $168.26 $112.20 $677.96 $720.89

8 Pc. Set is 7/8,15/16,1,1-1/16,1-1/8,1-3/16,1-1/4,1-1/2

8 Pc. Jumbo set: (GPC9008D) 1-9/16”,1-5/8”,1-11/16”,1-3/4”,1-13/16”,1-7/8”,1-15/16”, 2”

9 Pc. -- 1,1-1/8,1-1/4,1-3/8,1-1/2,1-5/8,1-3/4,1-7/8,2

13 Pc. Set (GPC9013R -C9013D) 3/4”,13/16”,7/8”,15/16”,1”,1-1/16”,1-1/8”,1-3/16”,1-1/4”,1-5/16,1-3/8”,1-7/16”,1-1/2”

8 Pc. XL Jumbo Set: (GPC9908D) 2-1/16”,2-1/8”,2-3/16”,2-1/4”,2-5/16”,2-3/8”,2-7/16”,2-1/2”

21 Pc. (GP9021-9021D) 3/4”,13/16”,7/8”,15/16”,1”,1-1/16”,1-1/8”,1-3/16”,1-1/4”,1-5/16”,1-3/8”,1-7/16”,1-1/2”,1-9/16”,1-5/8”,1-11/16”,1-3/4”,1-13/16”,1-7/8”,1-15/16”,2”

16 Pc Set: (GP9016 & 9016D) 2-1/16”,2-1/8”,2-3/16”,2-1/4”,2-5/16”,2-3/8”,2-7/16”,2-1/2”,2-9/16”, 2-5/8”,2-11/16”,2-3/4”,2-13/16”,2-7/8”,2-15/16”,3”

7Pc. Metric has 27,33,35,36,41 and 17, & 21 sq

8 Pc. Metric has 27,30,32,33,35,36,38,4110 Pc. set includes 27,29,32,35,36,38,41,46,504 Pc. set includes 27, 30, 32, 3326 Pc Set: (GP9026M & 9026MD) 19mm - 44mm no skips.

22 Pc. Jumbo Set: 28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,50

1” DRIVE6 POINT TRUCK

SERVICE SOCKET SET

IRSK8H9TSX5690AGP9151IRSK8C5T

9 Pc. Set 10 Pc. Set 10 Pc. Set5 Pc. Set

9 Pc. Set is 13/16 sq, 7/8,15/16,1,1-3/16,1-1/2,DW is 1-1/16,1-1/8,1-1/4

5 Pc Set is 13/16 sq, 33mm, 1-1/2” Deep, 1-1/8 and 1-1/4” Deep thin

10 Pc. Set: DEEP 1”, 1-3/16,1-1/2”,1-3/4,& 33mm--Thin Deep,1-1/16,1-1/8,1-1/4-- 4 Pt Square 13/16,15/16

166.65209.55215.45112.20

SX=SunexLifetime Warranty

Buzzard Gulch Inc IR=Ingersoll Rand

Lifetime Warranty


LIFETIME WARRANTYAMERICAN MADE

BG= Best Import We could find1 Yr. Warranty

GP=GREY Pneumatic

Lifetime Warranty

6 Point1” Drive Shallow

SAE & Metric Socket Set GPC9908R

Import-metal boxIR- metal boxSX- metal boxGP-metal boxGP-plastic boxGP-metal boxGP-plastic boxGP-plastic box

SX-metal boxImport-metal boxGP-plastic boxIR-plastic boxGP-plastic boxGP-metal box

IR-plastic boxSX-metal boxGP-plastic boxIR-pastic box

IR-PlasticGP MetalSX-MetalGP-PlasticGP-PlasticGP-MetalGP-MetalGP-Plastic

GP-PlasticGP-Metal

11 Pc 3/8” Drive 4 Point Pipe Plug

Socket Set

GP1211P

MALE SIZESGP1006PPGP1008PPGP1009PPGP1010PPGP1011PPGP1012PP

FEMALE SIZESGP1008FPGP1009FPGP1010FPGP1011FPGP1012FP

3/161/4

9/32 5/16

11/323/8

1/49/32 5/16

11/323/8

4.424.424.424.424.42

5.515.515.515.515.515.51

$37.98 8 Pc 1/2” Drive 4 Point Male Pipe Plug Socket Set

GP1308P

MALE SIZESGP2008PPGP2009PPGP2010PPGP2012PP

MALE SIZESGP2014PPGP2016PPGP2018PPGP2020P

1/49/32 5/163/8

7/161/2

9/165/8

8.058.058.059.71

6.466.466.466.46

$41.21

1/2” Drive Deep Length Extra-Thin

Wall Combo Impact Set

GP1500DW$92.12

GP2024DTGP2026DTGP2028DTGP2032DTGP2034DTGP2146DT

GP2017MDTGP2019MDTGP2021MDTGP2022MDTGP2023MDTGP2192DT

3/413/16

7/81

1-1/163/4 X 13/16

17MM19MM21MM22MM23MM19 X 21

10.12 10.18 11.16 12.89 13.97 9.45

10.18 11.16 12.89 13.89 16.56 9.45

13 PC 9 PT EXTRA DEEP 1/2” IMPACT SOCKET SET

GP1313XD$210.78

GP2016XDGP2018XDGP2020XDGP2022XDGP2024XDGP2026XDGP2028XD

GP2030XDGP2032XDGP2034XDGP2036XDGP2040XDGP2042XD

1/29/165/8

11/163/4

13/167/8

15/161

1-1/161-1/81-1/4

1-5/16

22.7626.0727.5128.9031.7132.21

16.6116.5816.5817.5818.5219.9121.28

EXTRA THIN WALL NOT COV-ERED UNDER WARRANTY

79.45 74.16 75.90 89.93 482.78 365.43 121.41 536.57 157.05 228.39 333.35

3/4” Deep SAE6 point Impact Socket

BG34DWSAEGP8034DSX4681IRSK6H8LSK87914SK87920WR608GP8038DGP8029DGPC8013DGPC8008DGPC8908D

8 Pc. 1” to 1-1/2”8 Pc. 1” to 1-1/2”8 Pc. 1” to 1-1/2”8 Pc. 1” to 1-1/2”14 Pc. 5/8” to 1-5/8”20 Pc. 5/8” to 2”8 Pc. 7/8” to 1-1/2”14 Pc. 3/4” to 1-5/8”29 Pc. 3/4” to 2-1/2”13 Pc. 3/4” to 1-1/2”8 Pc 1-9/16” - 2”8 Pc 2-1/16” - 2-1/2”

3/4” TRUCK SERVICEShallow & Deep 6 point Impact Socket Sets

SX4011M Sunex#SX4070M Sunex#SX4050 Sunex#IRSK6M6L IR-#GP8007 GP-#

11 Pc. Truck Service 7 Pc. Deep Truck Wheel5 Pc Wheel Service SAE6 Pc. 24mm to 36mm7 PC TRUCK SERVICE

SX4011 has Deep 27,30,32,33,35,3638,41,sq-17,20,dbl sq 21

Sx4070 has Deep 27,30,33,35,41,sq17,21SX4050 has DW33, 1-1/16”,1-1/4,1-1/2, sq 13/16

6 Pc includes: 24mm, 27mm, 30mm, 33mm, 32mm, 36mm

7 Pc Truck Service: 1” DW, 1-1/16”, 1-1/8”,1-1/4” Thin Wall Deep, 33m DW, 1-1/2” DW, 13/16 4 Pt




American Made





GP=GREY Pneumatic

Lifetime Warranty

161.70 108.90 80.85 123.75 123.02

3/4” METRICShallow & Deep 6 point Impact Socket Sets

GP8134MGP8134MDGP8026MGP8026MDGPC8009MGPC8009MD

8 Pc. 26mm to 38mm8 Pc. 26mm to 38mm26 Pc. 19mm to 50mm26 Pc. DW 19 to 50mm9 Pc. 36mm to 50mm9 Pc. 36mm to 50mm

8 Pc. GP: 26,27,29,30,32,35,36,38

26 Pc. GP Adds: 19,20,21, 22,23,24,25,28,31,33,34, 40,41,42,43,44,46,50

9 Pc. 36,38,40,41,42,43,44,46,50

72.02 122.96 317.60 479.10 190.13 252.35

GP-#GP-Deep-#GP-#GP-Deep-#GP*GP-Deep*

Generic*GP-#Sunex-#IR-#S-K-#S-KWrightGP-#GP-#GP-*GP-*GP-*

*Metal Box #Plastic Box @ Rail

BG34REGSAEGP8034SX4680IRSK6H8SK84420WR610GP8038GP8029GPC8013RGPC8008RGPC8908R

8 Pc. 1” to 1-1/2”8 Pc. 1” to 1-1/2”8 Pc. 1” to 1-1/2”8 Pc. 1” to 1-1/2”20 Pc. 5/8” to 2”14 Pc. 3/4” to 1-5/8”14 Pc. 3/4” to 1-5/8”29 Pc. 3/4” to 2-1/2”13 Pc. 3/4” to 1-1/2”8 Pc 1-9/16” - 2”8 Pc 2-1/16” - 2-1/2”

Generic-#GP-#Sunex-#IR-#S-KWright-*GP-#GP-#GP-*GP-*GP-*

8 Pc. Set contains: 1,1-1/16,1-1/8,1-1/4,1-5/16,1-3/8,1-7/16,1-1/2

14 pc Set contains: 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-5/8”

SK 20 Pc. set has 5/8”, 3/4”,13/16,7/8”,15/16’,1”,1-1/16”,1-1/8”,1-1/4”,1-5/16”,1-3/8”,1-7/16”,1-1/2”, 1-5/8”,1-11/16”,1-3/4”,1-13/16”, 1-7/8”,1-15/16”, 2”

29 Pc. Set same as above 3/4” to 2-1/2” no skips

13 Pc. GP 3/4”,13/16”,7/8”,15/16”,1”,1-1/16”,1-1/8”,1-3/16”, 1-1/4”,1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”

8 Pc. Jumbo: 1-9/16”,1-5/8”,1-11/16”,1-3/4”,1-13/16”,1-7/8”,1-15/16”,2”

8 PC. XL JUMBO: 2-1/16”,2-1/8”,2-3/16”,2-1/4”,2-5/16”,2-3/8”,2-7/16”,2-1/2”

3/4” Shallow SAE6 point Impact Socket

8 Pc. Set contains: 1,1-1/16,1-1/8,1-1/4,1-5/16,1-3/8,1-7/16,1-1/2

WR 8 Pc. has 7/8,15/16,1,1-1/16,1-1/8,1-1/4,1-5/16,1-1/2”

S-K 14 Pc adds 5/8,3/4,13/16,7/8,15/16,1-5/8

GP 14 pc same as SK but adds 1-3/16” no 5/8”

SK 20 Pc. set has 5/8”, 3/4”,13/16,7/8”,15/16’,1”,1-1/16”,1-1/8”,1-1/4”,1-5/16”,1-3/8”1-7/16”,1-1/2”, 1-5/8”,1-11/16”,1-3/4”,1-13/16”, 1-7/8”,1-15/16”,2

29 Pc. Set same as above 3/4” to 2-1/2” no skips

13 Pc. GP 3/4”,13/16”,7/8”,15/16”,1”,1-1/16”,1-1/8”,1-3/16”, 1-1/4”,1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”

8 Pc. Jumbo: 1-9/16”,1-5/8”,1-11/16”,1-3/4”,1-13/16”,1-7/8”,1-15/16”,2”

8 PC. XL JUMBO: 2-1/16”,2-1/8”,2-3/16”,2-1/4”,2-5/16”,2-3/8”,2-7/16”,2-1/2”

PICTURE IS NOT EXACT



64.75 105.03 103.13 129.53 442.54 663.82 273.77 176.87 754.01 220.14 255.89 469.71

6 Point 1/2“ SAE

SHALLOW IMPACT SOCKET SETS

BG12SAE ImportSX2650 SunexIRSK4H13 IR SK4035 (rail) S-KSK4039 (rail) S-KWR415 WrightGP1312 GPGP1319 GP

13 Pc. 7/16” to 1-1/4”13 Pc. 7/16” to 1-1/4”13 Pc. 7/16” to 1-1/4”15 Pc. 3/8” to 1-1/4”19 Pc. 3/8” to 1-1/2”13 Pc. 7/16” to 1-1/4”13 Pc. 7/16” to 1-1/4”19 Pc. 3/8” to 1-1-1/2”

17.61 43.56 45.38 116.65 193.12 164.72 41.00 77.93

13 pc Set contains: 7/16”1/2,9/16,5/8,11/16,3/4,13/16,7/8,15/16,1,1-1/16,1-1/8,1-1/4

15 Pc. Set adds 3/8,1-3/16

19 Pc. Set also adds 1-5/16,1-3/8,1-7/16,1-1/2

BG12DWSAE Import SX2651 SunexIRSK4H13L IRSK4045 (rail) S-KSK4049 (rail) S-KWR407 WrightGP1312D GPGP1319D GP

13 Pc. 7/16” to 1-1/4”13 Pc. 7/16” to 1-1/4”13 Pc. 7/16” to 1-1/4”15 Pc. 3/8” to 1-1/4”19 Pc. 3/8” to 1-1/2”14 Pc. 3/8” to 1-1/4”13 Pc. 7/16” to 1-1/4”19 Pc. 3/8” to 1-1/2”

13 pc Set contains: 7/16”1/2,9/16,5/8,11/16,3/4,13/16,7/8,15/16,1,1-1/16,1-1/8,1-1/4

14 Pc. adds 3/8

15 Pc. Set adds 1-3/16

19 Pc. Set also adds 1-5/16,1-3/8,1-7/16,1-1/2

34.50 69.30 74.25 168.88 261.49 267.54 68.66 140.81

6 Point1/2” SAE DEEP

IMPACT SOCKET SETS

6 Point1/2” METRIC

SHALLOW IMPACT SOCKET SETS

BG12MM Import SX2652 SunexIRSK4M14 IRSK4036 (rail) S-KSK4037 (rail) S-KWR466 WrightGP1412M GPGP1326M GPIRSK4M18 IR

14 Pc. 10 to 27 mm14 Pc. 10 to 27 mm14 Pc. 10 to 27 mm17 Pc. 8 to 24 mm 25 Pc. 8 to 36 mm16 Pc. 10 to 27 mm14 Pc. 10 to 27mm26 Pc. 10 to 36mm18 Pc. 10 to 24 mm

18.95 42.08 46.20 114.02 209.19 194.84 41.00 98.24 91.58

14 Pc. Set contains: 10,11,12,13,14,15,16,17,18,19,21,22,26,27

17 Pc. adds: 8,9,20,23 but stops at 2425 Pc. has 8-30 no skips add 32,3616 Pc. has 10-24 no skips add 27

26 Pc. has 10 to 30 no skips add 32,33,34,35,36 (no 31) plastic box 18 Pc. has Standard:10, 11, 13, 14, 17, 19, 21, 22, 24mm. Deep:13, 14, 21, 24mm. Deep Thin Wall:17, 19, 21mm. and 125mm extenison, Univeral joint.

6 Point1/2” METRIC DEEP

IMPACT SOCKET SETS

BG12DWMM Import SX2653 SunexIRSK4M14L IRSK4048 S-K

WR467 WrightGP1412MD GPGP1326MD GPIRSK4M5L IRIRSK4M3L IR

14 Pc. 10 to 27 mm14 Pc. 10 to 27 mm14 Pc. 10 to 27 mm15 Pc. 10 to 24 mm

16 Pc. 10 to 27 mm14 Pc. 10 to 27mm26 Pc. 10 to 36mm5 Pc. 17mm to 24mm3 Pc. 17mm to 21mm

39.95 70.95 79.20 160.93 286.44 68.06 180.02 45.38 32.18

14 Pc. Set contains: 10,11,12,13,14,15,16,17,18,19,21,22,26,27

15 Pc. is 10-24 no skips

16 Pc. has 10-24 no skips add 27

26 Pc. has 10 to 30 no skips add 32,33,34,35,36 (skips 31) plastic box

5 pc. includes: 17, 19, 21, 22, 24 mm3 Pc. has 17mm, 19mm, and 21mm



American Made





6 Point1/2” UNIVERSALIMPACT SOCKET

SAEIRSK4H7U IRSK34301 S-KGP1314U GPGP1314UD GP Deep

METRICIRSK4M7U IRSK34351 S-KGP1313UM GPGP1313UMD GP Deep

IRSK4LNR IR

SAE7 Pc. 1/2” to 7/8”8 Pc. 1/2” to 15/16”14 Pc. 7/16” to 1-1/4”14 Pc. 7/16” to 1-1/4”

METRIC7 Pc. 13 mm to 22 mm10 Pc. 10 mm to 19 mm13 Pc. 12mm to 24mm13 Pc. 12mm to 24mm

8 Pc. 1/2” Drive Metric Lug Nut Removel set

7 Pc. Set contains: 1/2,9/16,5/8,11/16,3/4,13/16,7/88 Pc. Set adds 15/16”14 Pc. Set adds 7/16”,1”,1-1/6”,1-1/8”, 1-3/16”, 1-1/4

7 Pc. Set contains: 13,14,15, 17,19, 21,2213 Pc. Set adds 12-16-18-20-23-2410 Pc. is 10-19 no skips

Lug nut removal set: 17, 18.5, 20, 21.5, 23, 24.5, 26, 27.5 mm.

Buzzard Gulch, Inc. 800-821-2932 Catalog T Page #25

GP=GREY Pneumatic

Lifetime Warranty

DUO Socket Sets on Page 27




I-R & GP COMBINATION SETS 3/8” AND 1/2” SHALLOW AND DEEP SAE & METRIC SET CAN BE SEEN ON PAGE # 23 & 27

SEE PAGE 23

SEE PAGE 27

98.18 185.82 197.78 212.01 98.18 209.19 166.68 185.72 108.08

7 Pc. 3/8” to 3/4”12 Pc. 5/16” to 1”12 Pc. 5/16” to 1”7 Pc. 10 to 19 mm10 Pc. 10 to19mm10 Pc. 10 to19 DW

$87.45132.23149.63$87.45108.89118.34


American Made

IR=Ingersoll Rand Lifetime Warranty

WR=WRIGHT INDUSTRIALLIFETIME WARRANTY

AMERICAN MADE

3/8” SAE SHALLOW IMPACT SOCKET SETS

6 POINT

SX3360 SunexIRSK3H8 IRSK4058 (rail) S-K WR313 WrightGP1213 GP

12 Pc. 5/16” to 1”8 Pc. 5/16” to 3/4”8 Pc. 5/16” to 3/4”8 Pc. 5/16” to 3/4”12 Pc. 5/16” to 1”

12 Pc. Set includes: 5/16”,3/8”, 7/16”, 1/2” 9/16”, 5/8”, 11/16”, 3/4”, 13/16” 7/8”, 15/16”, 1” and box

8 Pc. Set Includes: 5/16”, 3/8”,7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4” and box

$39.60$21.45$47.25$68.12$30.51

3/8” SAE DEEPWALL IMPACT SOCKET SETS

6 POINT

SX3361 SunexGP1213D GPIRSK3H8L IRSK4078 (rail) S-K WR314 Wright

12 Pc. 5/16” to 1”12 Pc. 5/16” to 1”8 Pc. 5/16” to 3/4”8 Pc. 5/16” to 3/4”8 Pc. 5/16” to 3/4”

$52.97$41.78$29.70$54.05$78.82

12 Pc. Set includes: 5/16”,3/8”, 7/16”, 1/2” 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1” and box

8 Pc. Set Includes: 5/16”, 3/8”,7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4” and box

28 Pc. 3/8” Deep Metric & SAE 6 Point Impact Socket Set

Includes: 5/16” to 1” Deep 8mm to 22mm Deep and 21x22mm, 3” extension 1/2 m to 3/8f adapter plastic box

3/8” UNIVERSAL IM-PACT SOCKETS SET

6 POINT

IRSK3H7U IRGP1212U GPGP1212UD GP DEEPIRSK3M7U IR/MMGP1210UM GPGP1210UMD GP

7 Pc. Set is complete: 3/8”,7/16”,1/2”,9/16”,5/8”,11/16”,3/4”

12 Pc. Add: 5/16”, 13/16”, 7/8”,

15/16”, 1”

7 Pc. 10,11,12,13,14,17,19

3/8” METRIC DEEPWALL IMPACT SOCKET SETS

6 POINT

SX3359 SunexGP1213MD GPIRSK3M8L IRSK4082 (rail) S-K WR357 Wright

13 Pc. 7mm to 19mm13 Pc. 7mm to 19mm8 Pc. 9mm to 19mm12 Pc 8mm to 19mm12 Pc 8mm to 19mm

$39.60$36.63$33.00$84.45117.76

8 Pc. Set includes: 9,10,11,13,14,15,17,19

12 Pc. and 13 Pc. sets do not skip any numbers between their starting and ending number.

3/8” METRIC SHALLOW IMPACT SOCKET SETS

6 POINT

SX3358 SunexGP1213M GPIRSK3M8 IRSK4062 (raiL) S-K WR356 WrightIRSK3M10 IR

13 Pc. 7mm to 19mm13 Pc. 7mm to 19mm8 Pc. 9mm to 19mm12 Pc 8mm to 19mm12 Pc 8mm to 19mm10 Pc 9mm to 19mm

$24.75$24.81$21.45$69.20111.93$36.30

8 Pc. Set includes: 9,10,11,13,14,15,17,1912 Pc. and 13 Pc. sets do not skip any numbers between their starting and ending number.10 Pc. includes: 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, and19mm.


$104.78


GP=GREYLifetime Warranty

1/4” SAE/ MM SHALLOW IMPACT

SOCKET SETS6 POINT

SX1810 SunexGP9710 GPSX1809 SunexGP9714M GPIRSK2M12 IR

10 Pc. 3/16” to 9/16”10 PC. 3/16” TO 9/16”9 PC. 5.5mm to 13mm14 Pc. 4mm to 15mm12 Pc. 6mm to 14mm

10 Pc. Set Includes: 3/16”,7/32”,1/4”,9/32”,5/16”,

11/32”,3/8”,7/16”,1/2”,9/16”9 Pc. MM includes: 5.5,6,7,8,9,10,11,12,1314Pc. MM adds 4,4.5,5,14,1512Pc. MM 6mm,7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 50mm extension, 100mm extension, 3/8”F to 1/4”M adapter.

$26.07$18.29$25.16$25.49$35.48

1/4” SAE/MM DEEPWALL IMPACT SOCKET SETS

6 POINT

SX1811 SunexGP9710D GPSX1812 SunexGP9714MD GP

10 Pc. 3/16” to 9/16”10 Pc. 3/16” to 9/16”9 Pc. 5.5mm to 13mm14 Pc. 4mm to 15mm

$29.70$25.22$33.00$35.63

10 Pc. Set Includes: 3/16”,7/32”,1/4”,9/32”,5/16”,11/32”,3/8”,7/16”,1/2”,9/16”

9 Pc. MM includes: 5.5,6,7,8,9,10,11,12,13

14Pc. MM adds 4,4.5,5,14,15

10 Pc. Set is complete with no skips 10-19

SX3360DD


1/4

” ---1

/4” -

--1/4

”---1

/4”

COMBO SETS SEE BELOW / DUO SOCKET SETS ON PAGE 27

COMBO SETS SEE BELOW / DUO SOCKET SETS ON PAGE 27







3/8

”---3

/8”--

-3/8

”----3

/8”--

-3/8

”----3

/8”--

--3/8

”----3

/8”--

-3/8

”---3

/8”--

-3/8

”---3

/8”

48 PC. REGULAR & DEEP, METRIC & SAE 6 POINT IMPACT

1/4” DRIVE SOCKET SETGP9748

Includes:3/16 - 9/16 reg. & deep• 4mm - 15mm reg & deep•

42 PC. REGULAR & DEEP, METRIC & SAE 6 POINT IMPACT

3/8” DRIVE SOCKET SETGP1242RD

Includes: 5/16 -3/4 reg. & deep• 8mm - 19mm reg & deep•

$106.56 $111.71

GP89653CRD53 Pc. 1/4” Drive

6 Point Standard and Deep Fractional and Metric Socket Set

EACH Set Contains:3/16” to 9/16” Standard•3/16” to 9/16” Deep•4mm to 15mm Standard•4mm to 15mm Deep•2”-4”-6” Wobble Extension•Wobble Spinner Handle•1/4” X 5.5” Ratchet•Blow Molded Box•


6 Point Standard and Deep Fractional and Metric

Socket Set

Each Set Contains:5/16” to 1” Standard•5/16” to 1” Deep•7mm to 22mm •Standard7mm to 22mm Deep•3”-6” Wobble Extension•3/8” X 7.75” Ratchet•Blow Molded Box•

GP8262222 Pc. 1/2” Drive

6 Point Standard Length Fractional Duo-Socket Set

Each Set Contains:3/8” to 1-1/2” •Standard3” Wobble Extension•6” Wobble Extension•1/2” x 9.75” Ratchet•Blow Molded Box•

GP82622D22 Pc. 1/2” Drive

6 Point Deep Length Fractional Duo-Socket Set

Each Set Contains:3/8” to 1-1/2” Deep•3” Wobble Extension •6” Wobble Extension•1/2” x 9.75” Ratchet•Blow Molded Box•

GP82629M29 Pc. 1/2” Drive

6 Point Standard LengthMetric Duo-Socket Set

Each Set Contains:10mm to 36mm •Standard (Skips only 31)3” Wobble Extension•6” Wobble Extension•1/2” x 9.75” Ratchet•Blow Molded Box•

GP82629MD29 Pc. 1/2” Drive

6 Point Deep Length Metric Set

Each Set Contains:10mm to 36mm Deep •(Skips only 31)3” Wobble Extension•6” Wobble Extension•1/2” x 9.75” Ratchet•Blow Molded Box•

The Duo Sockets shown here have dual capability, being able to be used as impact or chrome sockets.

Similar to thin-wall impact sockets.The GP Precision Drive Ratchet provides unmatched performance and duribility.

Lowprofile,RecessedQuickReleaseButtonandmore.Allsetsfeaturewobbleextensionswhichprovide15degreeofdeflectionandcanalsobelockedstraightfornormaluse.


12 Point Standard and Deep Fractional and Metric Socket Set

CHOICE 6 PT OR 12 PT$170.78


12 Point Standard and Deep Fractional and

Metric Socket Set


GP8222222 Pc. 1/2” Drive

12 Point Standard Length Fractional Set

GP82222D22 Pc. 1/2” Drive

12 Point Deep LengthFractional Set



GP82229M29 Pc. 1/2” Drive

12 Point Standard LengthMetric Duo-Socket Set


GP82229MD29 Pc. 1/2” Drive

12 Point Deep Length Metric Set


GP81627RD27 Pc. 3/8” Drive

6 Point Standard and Deep Fractional Socket Set

Each Set Contains:5/16” to 1” Standard•5/16” to 1” Deep•3”-6” Wobble •Extension3/8” X 7.75” Ratchet•Blow Molded Box•

$131.19

GP81635MRD35 Pc. 3/8” Drive

6 Point Standard and Deep Metric Socket Set

Each Set Contains:7mm to 22mm Standard•7mm to 22mm Deep•3”-6” Wobble Extension•3/8” X 7.75” Ratchet•Blow Molded Box•

$143.54


COMPLETE MASTER IMPACT SOCKET SETS NOT DUO

IRSK34C8686 PC 3/8” AND 1/2” I-R

IMPACT SOCKET SET

SET INCLUDES:3/8” Standard Sockets •5/16” - 3/4”3/8” Standard MM Sockets •9mm - 19mm3/8” Deep Sockets •5/16” - 3/4”3/8” Deep MM Sockets •9mm - 19mm1/2” Standard Sockets •7/16” - 1-1/4”1/2” Standard MM Sockets •10-19,21,22,26,27 1/2” Deep Sockets •7/16” - 1-1/4”1/2” Deep MM Sockets •10-19, 21,22,26,27mmPlastic Carrying Case•

$314.33

Set includes Shallow & Deep Metric sizes 7mm to •22mm (no skipsfractional sizes 5/16 •TO 1”Standard Universal Sock-•ets 5/16” to 1”Standard Metric Universal •Sockets 9mm to 19mm3” x 3/8” Extension•3/8” Universal Joint•1/4” shank to 3/8” hex •adapterSet comes complete in a •lowprofileblowmoldedstorage caseCoveredbylifetime•warranty which doesn't includeabuseormisuse

GP128181 Pc 3/8” Master

IMPACT SOCKET SET

$402.04


48 Piece 1/4" Drive 6 Point Standard and Deep Fractional and

Metric Socket Set with Universal Joint

SK91848

4.5” Pro Ratchet•2”, 6” Extensions •3/16”,- 9/16” Standard Sockets•1/4” - 9/16” Deep Sockets •4mm -15mm Standard Sockets•6mm - 15mm Deep Sockets•Molded plastic case•Thumbwheel ratchet•1/4”F to 3/8”M drive adapter•3/8”F to 1/4”M drive adapter•1/4” drive universal joint•

$194.03SK91844-1241 Piece 1/4" Drive 12 Point Standard

and Deep Fractional and Metric Socket Set

4.5" Pro Ratchet•2", 6" Extensions•3/16" - 9/16" Standard Sockets•1/4" - 9/16" Deep Sockets•5mm - 14mm Standard Sockets•6mm - 14mm Deep Sockets•Molded plastic case•

$204.46SK91860


Metric Socket SetUniversal Joint•1/4”F - 3/8”M•3/8”F - 1/4” M Adapters•2” and 6” Extensions•Pro Ratchet•1/8” - 5/8” Standard•1/8” - 9/16” Deep Sockets•4m-16m Standard •.4m-15m Deep•Packaged in a plastic molded case•

$281.06

S-K LIFETIME WARRANTY

SK94547-12

7-1/2-inch pro ratchet •3- and 6-inch extensions•1/4” - 7/8” standard sockets•3/8” - 7/8-inch deep sockets•6mm - 19mm standard sockets•10mm - 19mm deep sockets•Molded Plastic Case•

47 Piece 3/8" Drive 12 Point Standard


$238.65SK94549


Metric Socket Set7.1/2" Pro Ratchet•1-1/2” Pro Thumbwheel Ratchet•3/8” Universal Joint•3", 6" Extensions•1/4" - 7/8" Standard Sockets•3/8" - 7/8" Deep Sockets•6mm - 19mm Standard Sockets•10mm - 19mm Deep Sockets•Molded plastic case•

$225.60

SK472525 Piece 3/4" Drive 12 Point

Socket Set7/8" - 2-1/4" Standard Sockets•3/4" drive Pro Ratchet - 18"•3/4" drive sliding T-handle - 18"•3/4" drive extensions - • 3", 8", 16"•Blow molded case•

$826.17

SK4147-647 Piece 1/2" Drive

6 Point Standard and Deep Fractional and

Metric Socket Set10.3" Pro Ratchet•2", 5" Extensions•1/2" - 1-1/8" Standard Sockets•1/2" - 15/16" Deep Sockets•10mm - 24mm Standard Sockets•10MM - 19MM Deep Sockets•Molded plastic case•

$401.55SK4147

47 Piece 1/2" Drive 12 Point Standard


10.3" Pro Ratchet•2", 5" Extensions•1/2" - 1-1/8" Standard Sockets•1/2" - 15/16" Deep Sockets•10mm - 24mm Standard Sockets•10MM - 19MM Deep Sockets•Molded plastic case•

$401.55

Ratchets and Extensions are now on page # 30

SK1959$176.6519 Piece 1/2"

Drive 6 Point Reg Metric Socket SetSet Contains•

10mm, 11mm, 12mm, 13mm, •14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm. 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm, 28mm on a rail

SK1947$287.76

21 Piece 1/2" Drive 6 Point Deep Metric Socket SetSet Contains•

10mm, 11mm, 12mm, 13mm, •14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm. 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm, 28mm, 30mm, 32mm on a rail

SK13S$71.7413 Piece 3/8" Drive 6 Point Reg Metric Socket SetSet Contains•

7mm, 8mm, 9mm, 10mm, 11mm, •12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, on a rail

SK1854

$115.89

14 Piece 3/8" Drive 6 Point Deep Metric Socket Set

Set Contains•6mm, 7mm, 8mm, 9mm, 10mm, •11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, on a rail

SK4413

$110.36

13 Piece 3/8" Drive 6 Point

Deep Fractional Socket Set

Set Contains•1/4”, 5/16”, 3/8”, 7/16”, 1/2”, •9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1” on a rail

SK4613$77.15


Reg Fractional Socket Set

Set Contains•1/4”, 5/16”, 3/8”, 7/16”, 1/2”, •9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1” on a rail

SK4815-6

$215.31


Deep Fractional Socket Set

Set Contains• 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, •11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4” on a rail

SK4113-6

$113.95


Reg Fractional Socket SetSet Contains•

7/16”, 1/2”, 9/16”, 5/8”, 11/16”, •3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-1/4”, on a rail

$150.85 $282.02$225.34 $386.22SK4921 SK4532SK4116 SK4128-6

21 Piece 1/4” Drive 6 Point 3/16” to 1/2” Standard and

Deep Socket Set

32 Piece 3/8” Drive 6 Point Standard and

Deep Socket Set

16 Piece 1/2” Drive 6 Point and 12 Point

7/16” to 1-1/4” Socket Set

28 Piece 1/2” Drive 6 Point

3/8” to 1-1/4” Standard Socket

Set

Set Contains•4-1/2” Pro Ratchet•6” Spinner Handle•2” and 6” Extensions•Universal Joint•3/16”, 7/32”, 1/4”, 9/32”, 5/16”, •11/32”, 3/8”, 7/16”, 1/2” Standard Sockets1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, •1/2” Deep Sockets

Set Contains•3/8” Pro Ratchet•3/8” Drive Flex Handle•3/8” Drive Extensions•Universal Joint•1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, •5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1” Standard Sockets1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, •5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1” Deep SocketsSpark Plug Socket•

Set Contains•10.3” Pro Ratchet•16” Flex Handle•5” Extension•7/16”, 1/2”, 9/16” 6 point Stan-•dard Sockets5/8”, 11/16”, 3/4”, 13/16”, 7/8”, •15/16”, 1”, 1-1/16”, 1-1/8”, 1-1/4” 12 point Standard Sockets

Set Contains•1/2” Drive Pro Ratchet•1/2” Drive Flex Handle•2” and 5” Drive Extensions•Universal Joint•3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, •3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-1/4” Standard Sockets1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, •7/8”, 15/16”, 1” Deep Sockets

Individual Sockets Available Call for Quote 800-821-2932

WR4312 3/8”WR4314 7/16”WR4316 1/2”WR4318 9/16”WR4320 5/8”WR4322 11/16”WR4324 3/4”WR4326 13/16”WR4328 7/8”WR4330 15/16”WR4332 1”WR4334 1-1/16”WR4336 1-1/8”WR4340 1-1/4”

WR37911 Pc. 3/8” Drive 8 point Sockets Chrome Shallow

1/4” to 7/8”$127.31

WRIGHT INDUSTRIAL USA8 POINT SOCKETS (SQUARE) SOCKETS

WR45013 Pc. 1/2”

Drive 8 point Sockets Chrome Shal-low

7/16” to 1-1/4”$287.26

WR3308 1/4”WR3310 5/16”WR3312 3/8”WR3314 7/16”WR3316 1/2”WR3318 9/16”WR3320 5/8”WR3322 11/16”WR3324 3/4”WR3326 13/16”WR3328 7/8”

LIFETIMEWARRANTY

15.2215.22 15.50 15.50 15.90 16.30 17.67 21.59 26.45 27.26 29.65 33.30 33.72 36.85

10.73 10.73 11.03 11.14 11.27 11.55 12.29 12.40 12.61 13.35 14.08

1/2” 8 PT REG/REG 3/8” 8 PT REG/REG

8 POINT INDIVIDUAL SOCKETS


TE93211USA 3/8” 11 Pc.

Standard Sockets 1/4” to 7/8”

$14.25

TE93410USA 3/8” 10 Pc. Deep Sockets 5/16” TO 7/8”

$31.29

TE942141/2” 14 Pc. Standard

Sockets 3/8” to 1-1/4”

$43.75

TE94216MUSA 1/2” 16 Pc. Metric Sockets

10mm to 32mm$49.95

TE93217M/hjm3813M3/8” 13Pc.

Standard Sockets 7MM TO 19MM

$19.08

TE93412M/hjmd38133/8” 13 Pc.

Deep Sockets 7MM TO 19MM

$24.95

OTC1901OTC1920OTC1902OTC1903OTC1921OTC1904OTC1922OTC1923OTC1937OTC1932OTC1933OTC1906

2-3/32” 2-1/4”2-3/8” 2-3/8”8 pt2-1/2”2-9/16”2-5/8”2-3/4”2-3/4” 8pt2-7/8”2-7/8” 8pt3”

OTC1908OTC1909OTC1910OTC1911OTC1925OTC1926OTC1927OTC1912OTC1913OTC1914OTC1915OTC1940

3-1/4” 3-1/4” 8 pt3-1/2”3-1/2” 8 pt3-3/4” 8 pt3-3/4”3-13/16 8 pt3-7/8”3-7/8” 8 pt4”4-1/8”4-1/8” 8 pt

OTC (USA Made) Locknut Sockets 6 Point and 8 Point

TE944123/8” 12 Pc.

Deep Sockets 1/2” TO 1-1/4”

$59.95

TE94415M1/2” 15 Pc.

Deep Sockets 12mm to 27mm

$69.95

Metal Box

Metal Box

14 Pc. Jumbo 1/2” Drive Metric Open-End Crowfoot

Wrench SetDrop Forged, heat treated, with polished black phosphate finish

SIZES27,29,30,32,33,34,35,36, 38,41,43,46,48, & 50 MM

BGCF14J14 Pc. Jumbo Crowfeet

1-1/16”,1-1/8”,1-13/16”, -1 1/4”,1-5/16”,1-3/8”,1-7/16”,

1-1/2”,1-5/8”,1-11/16”,1-3/4”,1-13/16”,1-7/8”,2”

$69.95

BGCF14MM$149.95

$30.06$29.10$30.06$30.06$29.10$29.10$28.12$29.10$32.01$29.10$32.01$30.06

$29.10$27.16$28.12$30.06$31.04$32.01$32.01$32.99$32.01$31.04$30.06$47.55

SX9708Sunnex 8 Pc. 3/8” Drive

Flare Crowfoot Wrench Set3/8”,7/16”,1/2”, 9/16”, 5/8”,11/16”, 3/4”, 7/8”

$24.75


Crowfoot Wrench Set1”, 1-1/16”, 1-1/8”, 1-3/16”,

1-1/4”, 1-3/8”, 1-1/2”

$56.70


Crowfoot Wrench Set1-5/8”, 1-3/4”, 1-7/8”,

2”, 2-1/8”, 2-1/4”

$80.03

SX9710M3/8” Drive 10 PC Metric Flare

Crowfoot Wrench Set10mm, 11mm, 12mm, 13mm, 14,mm, 15mm, 16mm, 17mm,

18mm, 19mm

$31.35

SX97301/2” Drive 8 PC Metric Crowfoot

Wrench Set24mm, 25mm, 26mm, 27mm, 28mm, 29mm, 30mm, 32mm

$51.48

SX97401/2” Drive 7 PC Metric Crowfoot Wrench Set

34mm, 35mm, 36mm, 38mm, 41mm, 42mm,

46mm

$72.60

SK450810 Pc. 3/8” SAE Flare Nut Crowfoot

Wrench Set3/8” to 1”$151.77

SK451111 Pc. 3/8” Metric Flare Nut

Crowfoot Wrench Set9mm to 19mm

$151.77

SK4236510 Pc. 3/8” Drive Metric Open End

Crowfoot Set10mm to 19mm

$142.56

SK4226511 Pc. 3/8” Drive SAE Open End

Crowfoot Set3/8” to 1”$154.52

4.25” 9.5”

8.38”7”

10”7.88”5.5”

10.5”5.5”18”7.6”

10.3”11”

9-13”7.75”

8”

283.25403.8144.12

160.53101.97183.79294.34112.7322.20

52.4373.3962.9480.5099.2088.2966.2290.1056.1528.0339.7734.0449.8912.95

26.3436.9140.0212.9515.7322.1727.1016.1619.2037.465.42

RatchetBlack Ratchet

Ratchet

30” 42”26”

1” 1” 1”

WrightWrightImport

WR8400WR8425BGSRN8-26

TeardropCushion GripFlex Teardrop

RatchetRatchet

Open HeadRatchetRatchet

XLG Flex HeadXL Offset

ExtendableExtendable

Quick ReleaseRatchet

KD81304FKD81303FKD81306FWR4400WR4425WR4480SK42470SK40170TI11072TI12046TI12073TI12074GP21024BRQBGSRN4-10

GearWrenchGearWrenchGearWrench

WrightWrightWright

SKSK

TitanTitanTitanTitanGP

Import

1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”1/2”1/2” 1/2”1/2”1/2”1/2”1/2”

11”12” 17”10” 15”10”

10.5”15”24”15”

18-24”12-17”9.75”10”

TeardropCushion Grip

RegularStubby

RatchetSwivel Head

XLG FlexheadFlex Stubby Extendable


5.13” 6.88”4.5” 5.5” 7.5”

5.78”12”6”

6-8”5.8”6”

3/8”3/8”3/8”3/8”3/8”3/8”

3/8”-1/2”3/8”-1/2”

3/8”3/8”3/8”3/8”3/8”3/8”3/8” 3/8”

1/4”1/4”1/4”

1/4”-3/8”1/4”-3/8”

1/4” 1/4”

1/4”-3/8”1/4” 1/4” 1/4”

GearWrenchGearWrench

S-KTitanTitanTitanTitanTitanTitanGP

Import

KD81011FKD81007FSK40970TI11050TI11057TI11066TI11074TI11350TI12075GP9572BRQBGSRN2-6

RATCHETS

GearWrenchGearWrench GearWrench

WrightWrightWrightTitanTitanTitanTitanSK SK

TitanTitanGP

Import

GearWrench Extensions

DriveBreaker BarBreaker BarBreaker BarBreaker BarBreaker BarBreaker BarBreaker BarBreaker BarRatcheting Breaker BarRatchetingBreaker BarBreaker BarBreaker BarBreaker BarBreaker BarBreaker BarBreaker BarBreaker BarBreaker Bar

1/4”1/4”3/8”3/8” 1/2”1/2”1/2” 1/2” 1/2” 1/2”1/2” 1/2”1/2”3/4”3/4” 3/4”3/4”3/4”3/4”

1”

5.4”5.5”10”12”9”

15”16”24”18”24”24” 18”25”19”19”21”40”18”40”25”

SKGearWrench

SKGearWrench

SKGearWrench

SKGearWrench

TitanSK

TitanImportImport

SKGearWrench

WrightTitan

ImportImport

Industrial

RatchetTeardropRatchet

Black RatchetExtendable

Ratchet

18”19”24”42”

19-30”18”

Part #

Individual Ratchets, Breaker Bars and ExtensionsWRIGHT USA INDUSTRIAL RATCHETS AND BREAKER BARS GEARWRENCH RATCHETS AND BREAKER BARS AND EXTENSIONS

40.9267.3648.1058.2279.3868.6213.2319.5823.2431.7350.1668.4021.9922.2443.667.51

-----Wobble

-----Wobble

-----Wobble

-----Wobble

-----Wobble

-----

Wobble-----

Wobble-----

Wobble-----

Wobble

---------------

5.868.057.189.849.16

11.169.53

14.7410.5816.43

8.0312.1513.3214.5816.1318.8924.3824.96

22.8528.4741.03


1/4” Dr. x 12”,3/8” Dr. x 18” 1/2” Dr. x 24”

*Extra-long flex-head Ratchet*Contoured cushion grip handles

TITAN RATCHETS AND BREAKER BARS

Brand Drive Length Description Price

SK47170KD81400WR6400WR6425TI12072BGSRN6-18

3/4”3/4” 3/4” 3/4” 3/4”3/4”

SKGearWrench

WrightWrightTitan

Import

Part # Brand Price24.1517.1930.0829.1941.0238.9154.1548.6440.7785.2542.8810.7921.2488.2344.57

113.0982.8121.7055.50

288.02

Description

Breaker Bars

Part # Drive Length Description PriceKD81240KD81245KD81241KD81246KD81242KD81247KD81243KD81248KD81244KD81249 KD81340KD81344KD81341KD81345KD81342KD81346KD81343KD81347

KD81411KD81412KD81413

3/8” 3/8” 3/8”3/8” 3/8” 3/8”3/8” 3/8” 3/8” 3/8”

1/2”1/2” 1/2”1/2” 1/2” 1/2” 1/2” 1/2”

3/4” 3/4” 3/4”

1-1/2”1-1/2”

3”3” 6”6”

10”10” 12”12”

3”3” 5”5”

10”10” 15”15”

5”8”

16”

Length

$91.08

KD81209FKD81208FKD81211FWR3400WR3425WR3480TI12051TI11058TI11067TI11073SK45170SK45179TI12045TI12070GP1872BRQBGSRN3-8

TeardropCushion Grip

TeardropRatchetRatchet

Open HeadStubby

RatchetSwivel Head

XLG FlexheadRegularRegular

XL OffestExtendable


Picture

Cushion Grip Ratchet #2

Teardrop Ratchet #3

Flex-Teardrop Ratchet #4

Open Head Ratchet #5

Offset Ratchet #7

Stubby Ratchet #8

Swivel Head Ratchet #10

XLG Flex Head #11

Flex Stubby Ratchet #12

XL Offset Ratchet #13

Extendable Ratchet #14

Quick Release Ratchet#15

Regular Ratchet #1

#3#2#3#1#1#5#8#1

#10#11#1#1

#13#14#15#1

#3#2#1#8#1

#10#11#12#13#15#1

#3#2#4#1#1#5#1#1

#11#13#14#14#15#1

#1#3#1#6

#14#1

#1#6#1

SK40952KD81013SK45152KD81221SK41650KD81307SK41652KD81308D TI12018SK41654TI12024 BGBB4-18BGBB4-25SK47155KD81404WR6435TI12048BGBB6-18BGBB6-40WR8435

Flex Head Ratchet #9

TI11075

Black Ratchet #6

OTHER S-K SINGLE EXTENSIONS AND SETS AVAILABLE--CALL FOR QUOTE

SK45143/8” Drive

4 Pc. Extension Set1.5”-3”-6”-12”

$47.85SK4114

1/2” Drive3 Pc. Extension Set

5”-10”-20”

$66.88SK4916T

1/4” Drive6 Pc. Extension Set2”-3”-6”-8”-10”-14”

$62.71MIT1608

1/4” Drive3 Pc. Extension Set

12”-15”-18”

$14.75

MIT16103/8” Drive

3 Pc. Extension Set15”-18”-24”

MIT16151/2”” Drive

3 Pc. Extension Set15”-18”-24”

$16.04 $19.04

1.44---------1.50---------1.671.942.052.292.633.093.484.224.644.965.686.647.346.798.518.259.34

14.1411.0416.1014.1515.8717.0818.9422.70

33.4338.1342.0546.19

88408------------ 88410------------ 8841288414 88416 88418 88420 88422 8842488426 88428 88430

NEED WRENCHES?WRENCH

SizeS-K SUPER KROME1/2” Down 12PT

S-K SUPER KROMELONG PATTERN 12 PT

CHEAPEST WE COULD FIND

N/AN/A N/AN/ASX991512SX991514SX991516SX991518SX991520SX991522SX991524SX991526SX991528SX991530SX991532SX991534SX991536N/ASX991538SX942SX944N/ASX948SX952N/ASX956N/ASX960SX964N/ASX968SX972SX976SX980

SUNEXV-NOTCHED 3/8”-1 1/4”

---------------------------------------3.183.244.164.634.986.486.817.389.259.82

11.7813.6016.22N/A

20.1316.1117.58----------24.0525.90----------27.75----------37.0044.40----------59.2066.6070.3077.70

BGC14N/ABGC516N/ABGC38BGC716BGC12BGC916BGC58BGC1116BGC34BGC1316BGC78BGC1516BGC1BGC1-116BGC1-18BGC1-316BGC1-14BGC1-516BGC1-38BGC1-716BGC1-12BGC1-58BGC1-1116BGC1-34BGC1-1316BGC1-78BGC2

BGC2-18BGC2-14BGC2-38BGC2-12

18.02-----------18.02----------18.0220.4420.4421.6125.1628.8832.4733.6137.3040.89

14.8914.8914.8914.8914.8918.3218.3219.4619.4621.7924.0725.2233.2340.1342.4051.6060.7765.3472.2186.0194.02111.19114.66150.48150.48184.09185.35211.81222.67239.54268.03293.43361.14376.73

SK88208SK88209SK88210SK88211SK88212 SK88214 SK88216 SK88218 SK88220 SK88222 SK88224 SK88226 SK88228 SK88230 SK88232 SK88234 SK88236 SK88238 SK88240 SK88242 SK88244 SK88246 SK88248SC52C54C56C58C60C64C66C68C72C76C80

1/4”9/32”5/16”11/32”3/8”7/16”1/2”9/16”5/8”11/16”3/4”13/16”7/8”15/16”1”1-1/16”1-1/8”1-3/16”1-1/4”1-5/16”1-3/8”1-7/16”1-1/2”1-5/8”1-11/16”1-3/4”1-13/16”1-7/8”2”2-1/16”2-1/8”2-1/4”2-3/8”2-1/2”

18.0218.0218.0219.1719.1720.4420.4421.6124.0125.1626.4627.6028.8832.4733.6136.0237.3039.6140.89

88506885078850888509885108851188512885138851488515885168851788518885198852088521885228852388524

88306883078830888309 88310 883118831288313 88314 88315 88316 88317 88318 8831988320 8832188322 88323 88324883258832688327N/A883298833088332

6mm7mm8mm9mm10mm11mm12mm13mm14mm15mm16mm17mm18mm19mm20mm21mm22mm23mm24mm25mm26mm27mm28mm29mm30mm31mm32mm33mm34mm36mm38mm41mm46mm50mm

1.501.501.571.741.852.072.072.072.222.502.613.003.203.424.094.314.664.814.889.019.019.0111.4311.4313.8814.3414.80

S-K SUPER KROMEMETRIC 12PT

S-K SUPER KROMELONG PATTERN 12PT

CHEAPEST WE COULD FIND

SUNEXV-NOTCHED

N/AN/A SX991708MSX991709MSX991710MSX991711MSX991712MSX991713MSX991714MSX991715MSX991716MSX991717MSX991718MSX991719MSX991820MSX991821MSX991822MSX991823MSX991824MSX991925MSX991926MSX991927MSX991928MSX991929MSX991930MSX991931MSX991932MSX933SX934SX936SX938SX941SX946SX950

-----------------2.312.312.312.312.662.782.964.014.034.035.165.386.726.726.556.556.81

12.5812.4515.3020.3520.3520.3524.0524.0514.8016.6518.5420.3522.1831.4537.00

14.8914.8914.8914.8914.8916.7416.7417.1719.4619.4619.4621.7621.7625.2225.1625.2232.0832.4739.6142.0342.0351.74

60.1667.3473.33

BGC6MBGC7MBGC8MBGC9MBGC10MBGC11MBGC12MBGC13MBGC14MBGC15MBGC16MBGC17MBGC18MBGC19MBGC20MBGC21MBGC22MBGC23MBGC24MBGC25MBGC26MBGC27MBGC28MBGC29MBGC30MBGC31MBGC32M

WRENCHSize

1-5/8” and bigger areS-K R

AISED PAN

EL


Lifetime Warranty Lifetime Warranty Lifetime Warranty Lifetime Warranty

1 Year Warranty

1 Year Warranty

RAISED

PANEL

RAISED

PANEL

STA86-831N/ASTA86-832N/ASTA86-833STA86-834STA86-835STA86-836STA86-837STA86-838STA86-839STA86-840STA86-841STA86-842STA86-843STA86-844STA86-845N/ASTA86-846STA89-715STA89-716STA89-717STA89-718STA89-719N/ASTA89-720STA89-711STA89-712STA89-713

1/4”9/32”5/16”11/32”3/8”7/16”1/2”9/16”5/8”11/16”3/4”13/16”7/8”15/16”1”1-1/16”1-1/8”1-3/16”1-1/4”1-5/16”1-3/8”1-7/16”1-1/2”1-5/8”1-11/16”1-3/4”1-13/16”1-7/8”2”

$2.39-----------$2.58-----------$2.69$2.88$3.14$3.44$3.75$4.27$4.99$5.54$6.19$7.09$9.07$10.69$11.31-----------$13.50$19.62$21.56$26.05$29.56$37..98-----------$46.16$53.53$60.90$61.17

STANLEY12 POINT

WRENCHSize

TORQUE WRENCHES / MULTIPLIERS

KD85070KD85071

SK75002KDS85050SK75025KDS85051SK75100KDS85052SK75150KDS85053SK75250KDS85054SK75600KDS85055

3/8”1/2”

1/4”1/4”3/8”3/8”3/8”3/8”1/2”1/2”1/2” 1/2”3/4”3/4”

10-100 Ft Lb25-250 Ft lbs

20-100 In Lbs30-200 In Lbs50-250 In Lbs25-250 In Lbs10-100 Ft Lbs10-100 Ft Lbs20-150 Ft Lbs20-150 Ft Lbs25-250 Ft Lbs20-250 Ft Lbs100-600 Ft100-600 Ft

ELECTRONIC ELECTRONIC

RatchetingRatchetingRatchetingRatchetingRatchetingRatchetingRatchetingRatchetingRatchetingRatchetingRatchetingRatcheting

329.24 367.55

256.28 159.41168.38153.83172.50155.93180.25159.03197.45174.70892.50716.50

KD85070

KD85055

KD = GearWrench

SK40109 Pc SK 1/2’ Drive

Adapter Set

$154.46Includes:1/4” Chrome Universal3/8” Chrome Universal3/8” Impact Universal1/2” Impact Universal1/4”F-3/8”M Chrome Increaser3/8”F-1/2”M Chrome Increaser1/2”F-3/4”M Chrome Increaser3/8”F-1/4”M Chrome Reducer1/2’F-3/8”M Chrome ReducerPlastic Box

SK45065 Pc SK 1/2” Drive

Adapter Set

$42.25Includes:1/4”F-3/8”M Chrome Increaser3/8”F-1/2”M Chrome Increaser1/2”F-3/4”M Chrome Increaser3/8”F-1/4”M Chrome Reducer1/2’F-3/8”M Chrome ReducerOn a Rail

SK45188 Pc SK

1/2” Drive Adapter Set$104.24

Includes:1/4” Chrome •Universal3/8” Chrome •Universal1/2” Chrome •Universal1/4”F-3/8”M •Chrome Increaser3/8”F-1/2”M •Chrome Increaser1/2”F-3/4”M •Chrome Increaser3/8”F-1/4”M •Chrome Reducer1/2’F-3/8”M •Chrome ReducerOn a Rail•

Lifetime Warranty

SK75002

SK86017 SKSTA85-990 StanleyBGWCS-14 ImportTI17329 Titan SX9714 SunexSK86255 SKSK86014 SK

BGWCS-4S Import

13 Pc. 1/4” - 1”14 Pc. 3/8” - 1-1/4”14 Pc. 3/8” - 1-1/4”14 Pc. 3/8” - 1-1/4”14 Pc. 3/8” - 1-1/4”15 Pc. 1/4” - 1”16 Pc. 1/4” - 1-1/4”

4 Pc. 1-5/16” - 1-1/2”

14 PC. Set: 3/8”,7/16”,1/2”,9/16”,5/8”,11/16”,3/4”,13/16”,7/8”,15/16”,1”,1-1/16”, 1-1/8”, 1-1/4”

SK86265 SKSK86224 SKBGWCS-9 Wisdom BGWCS-13 WisdomSX9715 SunexTI17330 TitanSX9605M SunexSK86226 SKSX9606M SunexSX9707M SunexBGWJ11MM GRIP

15 Pc. 8mm - 22mm19 Pc. 6mm - 24mm11 Pc. 9mm - 19mm13 Pc. 20mm - 32mm14 Pc. 6mm - 19mm16 Pc. 10mm - 32mm5 Pc. 20mm - 24mm6 Pc. 25mm - 32mm6 Pc. 25mm - 32mm7 Pc. 33mm - 50mm11 Pc. 34mm - 50mm

5 Pc. Set Contains: 20-24 no skips6 Pc. Set Contains: 25,26,27,29,30,3211 pc Set contains: 9-19 no skips13 Pc. Set Contains: 20-32 no skips14 Pc. Set Contains: 6-19 no skips15 Pc. Set Contains: 8-22 no skips16 Pc. Set Contains: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 25, 30, 3219 Pc. Set Contains: 6mm to 24mm no skips7 Pc. Jumbo Set: 33,34,36,38,41,46,5011 Pc. Jumbo Set: 34,35,36,38,40,41,42,44, 46,48,50


TI=Titan90 Day Warranty



SAE Combination Wrench Sets

METRIC Combination Wrench Sets

SK1790 SKBGWJ6C ImportBGWJ7 ImportSX9707 SunexBGWJ10 ImportBGWCS-4 ImportSX9604 Sunex

6 Pc. 1-5/8 - 2”6 Pc. 1-3/8 - 2”7 Pc. 1-5/16” - 2”7 Pc. 1-5/16” - 2”10 Pc. 1-3/8” - 2”4 Pc. 2-1/8” - 2-1/2”4 Pc. 2-1/8” - 2-1/2”

6 PC Set: 1-3/8”,1-1/2”,1-5/8,1-3/4”, 1-7/8”,2”

7 PC Set: Same as 6 Pc. But add the 1-5/16”

10 PC Set: Same as 6 Pc. But add the 1-5/16”, 1-7/16”,1-11/16”,1-13/16”

4 PC Jumbo Set: 2-1/8”,2-3/8”,2-1/4”,2-1/2”

BGWCS-14A ImportSX9914 Sunex SX9916 Sunex

14 Pc. 3/8” to 1-1/4”14 Pc. 3/8” to 1-1/4”6 Pc. 1-3/8” to 2”

14 PC. Set: 3/8”,7/16”,1/2”,9/16”,5/8”,11/16”,3/4”,13/16”,7/8”,15/16”,1”,1-1/16”, 1-1/8”, 1-1/4”

ANGLE HEAD

WRENCHSETS SX9914M Sunex

SX9926 SunexSX9927 Sunex

14 Pc. 6mm - 19mm6 Pc. 20mm - 25mm7 Pc. 26mm - 32mm

6 PC Set: 1-3/8”,1-1/2”,1-5/8”,1-3/4”, 1-7/8”,2

14 PC Set: 6-19mm no skips



FULL POLISHED LONG PATTERN WRENCHES

SK86018 SKSX9915 * SunexBGWCS-14W Wisdom

16 Pc. 1/4” - 1-1/4”14 Pc. 3/8” - 1-1/4”14 Pc. 3/8” - 1-1/4”

14 PC. Set: 3/8”,7/16”,1/2”,9/16”,5/8”,11/16”,3/4”,13/16”,7/8”,15/16”,1”,1-1/16”, 1-1/8”, 1-1/4”

SX9917M * SunexSK86127 6 pt SKSX9918M * SunexSX9919M * SunexSK86037 SKSX9917MPR * Sunex

12 Pc. 8mm - 19mm13 Pc. 7mm - 19mm5 Pc. 20mm - 24mm8 Pc. 25mm - 32mm19 Pc. 6mm - 24mm25 Pc. 8mm - 32mm

12 PC Set: 8mm - 19mm no skips

5 Pc. Set: 20-24mm no skips

8 Pc. Set: 25mm - 32mm no skips


16 Pc. Set: same as 14 but adds 1/4” & 5/16”

4 PC Mini Jumbo Set: 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”

SK=SKLifetime Warranty

STA=StanleyLifetime Warranty

STUBBY WRENCH

SETS

SK86237 SKSX9930 Sunex

SK86247 SKSX9930M Sunex

7 Pc. 3/8” to 3/4”11 Pc. 3/8” to 1”

7 Pc. 10mm - 18mm10 Pc. 10mm -19mm

70.38 36.30 71.65 29.70

7 PC Set: 3/8”,7/16”,1/2”,9/16”,5/8”,11/16”, 3/4”

11 PC. Set: 3/8”,7/16”,1/2”,9/16”,5/8”,11/16”,3/4”,13/16”,7/8”,15/16”,1”,


FLARE NUT

WRENCH SETS

SK386 (15 de offset) SKSK381 SK

SX9809 Sunex

SK378 (15 de offset) SK

5 Pc. 1/4” - 7/8” 5 Pc. 1/4” - 7/8”

9 PC. 1/4’ -11/16” & 8mm - 21mm

6 Pc. 9mm - 21mm

78.81 79.09 37.13 96.59

5 Pc. 1/4” x 5/16”, 3/8” x 7/16”, 1/2” x 9/16”,5/8” x 11/16”, 3/4” x 7/8”

9 Pc. 1/4” x 5/16”, 3/8” x 7/16”,1/2” x 9/16”, 5/8” x 11/16”, 8 x 9mm,10 x 12mm, 13 x 14mm, 15 x 17mm,19 x 21mm

6 Pc. 9 x 11mm, 10 x 12mm, 13 x 14mm15 x 17mm, 16 x 18mm, 19 x 21mm

53.30 42.90 74.25

33.69 66.83 121.44


400.12 69.30 49.95

*V-Notched

36.30 202.06 36.30 89.10 340.34 151.80


278.08 275.94 24.95 66.50 39.60 40.99 26.40 248.33 51.15 116.33 144.25

16 PC Set: Same as 14 but add 1/4”, 5/16”

753.34 59.95 69.95 117.98 99.21 105.88 221.10

202.10 75.92 31.25 35.89 54.45 203.22 354.14 37.99

13 PC. Set: 1/4”,5/16”,3/8”,7/16”,1/2”,9/16”,5/8”,11/16”,3/4”,13/16”,7/8”,15/16”,1”

SK---6 PC Set: 1-5/8”,1-11/16”,1-3/4”, 1-13/16”,1-7/8”,2”

15 Pc. Set: 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”

7 PC Set: 10,12,13,14,15,17,18mm

SLEDGE HAMMER

BGN34-3.3FG3.3 LB. Sledge With Fiberglass Handle

$13.90

BGN32-3.3FG3.3 LB. Cross Pein

With Fiberglass Handle

$13.95

BGN31-3.3FG3.3 LB. Drilling Hammer With

Fiberglass Handle13.95

BGSS-211” 21 Pc. Socket Set

1-5/8” to 3-1/8”Ratchet-Extension-

Sliding- T$269.95

BGSS6-99 Pc. 3/4” Jumbo

Socket Set2-1/16” to 2-1/2”

$64.55

BGSS-343/4” 21 Pc. Socket Set

7/8” to 2”Ratchet-Extensions-

Sliding- T$88.80

BGSS4-17CV17 Pc. 1/2” Socket Set

7/16” to 1-1/4”, Ratchet, Flex,

Extensions$45.66

BGSS3-21CV21 Pc. 3/8” Socket SetShallow And Deep Wall, Ratchet and Extensions

$34.50

BGSS2-22CV22 Pc. 1/4” 1/4” to 1/2”

shallow & deep wall sockets ratchet -spinner-

extensions$26.95

BGSS4-17CVMM17 Pc. 1/2” Socket Set

10mm to 24mm, Ratchet, Flex,

Extensions$45.66

BGSS3-21CVMM21 Pc. 3/8” Socket SetShallow And Deep Wall, Ratchet and Extensions

$34.50

BGTD45045 Pc. Tap & Die Set

1/4” to 1” Course and Fine

$89.95

BGTD450MM45 Pc. Metric Tap & Die Set

6MM to 24MMCourse and Fine

$89.95


BGMSS-88 Pc. Screwdriver

Set

$5.95

BGNBPW-5Heavy Duty

5 Pc. Ball Pein w/fiberglass handles

$26.95

BG81326 16 1BG81327 24 1.5BG83228 32 2BG83222 40 2.5BG83229 48 3BG83230 64 4

dead blow hammer ShoT

loaded NoN marrING head

PART # OZ LB PRICE

BGCL-3311016 OZ. Claw Hammer

With Fiberglass Handle

$5.95

BGMIT756045 Pc. Tap & Die Set

1/4” to 1” Course and Fine

$99.95

BGMIT756145 Pc. Tap & Die Set

6mm- 24mmCourse and Fine

$99.95

BGSS-353/4” 21 Pc. Socket Set

19, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 41, 42, 45, 46, 48, 50mm

Ratchet-Extensions- Sliding- T$82.95

BGSS2-22CVMM22 Pc. 1/4” 4mm to

11mm shallow and deep wall sockets

ratchet-spinner- extensions

$26.95

BGTD40M40 Pc. Tap & Die Set

3mm to 12mmCourse and Fine

18.86

PTM71345 Pc Ballpein Hammer Set

8-12-16-24-32 OzFiberglass Handles

$53.54

PEFORMANCE TOOL HAMMERS

DEAD BLOW

HI VIZ

PTM7216 1 LbPTM7224 1-1/2 LbPTM7232 2 LbPTM7248 3 LbPTM7264 4 Lb

$9.95 12.03 14.58 15.30 18.72

CROSS PEIN HAMMER

PTM7100 3 LbPTM7101 4 LbPTM7102 6 Lb

14.52 16.59 33.10

PTM7104 3 Lb $15.37

TITAN BALL PEIN HAMMERSTI63024 32ozTI63016 24ozTI63316 16ozTI63312 12ozTI63308 8oz

14.31 12.85 12.71 $8.95 $7.21

$8.95 11.66 12.41 15.52 17.06 18.62

BGLS36 Pc. Letter & Number

Stamp set 1/8”$18.95

BGIPD-41/2” Impact Driver

w/4 bits $10.79

SLUGGING HAMMERS

MECH/LOC REPLACEMENT 6 - 16 LB SLEDGE HAMMER HANDLES

$19.98$21.70

$14.88$14.13

NUPLA USA HAMMERS

MECH/LOC REPLACEMENT 6 - 10 LB SLUGGING HAMMER HANDLES

NU10015 1 LbNU10025 2 LbNU10035 3 LbNU10045 4 Lb

NU07505 5 LB 20” W/3” FACENU07508 8 LB 30” W/4” FACENU07512 12 LB 36” W/4” FACE

NU10027 2 Lb 1 Steel FaceNU10022 2 Lb 1 Brass Face

$29.44$34.56$44.85$57.97

119.64 388.92469.00

$35.69$37.12

NU21008 8 Oz NU21012 12 OzNU21016 16 OzNU21020 20 OzNU21024 24 OzNU21032 32 OzNU21040 40 OzNU21048 48 Oz

NU17016 16 Oz ClawNU17020 20 Oz Claw

NU19016 16 Oz RippingNU19020 20 Oz Ripping

NU28525 2 Lb 8” HdlNU28535 3 Lb 8” HdlNU28545 4 Lb 8” Hdl


NU29135 3 Lb 12” HdlNU29145 4 Lb 12” Hdl

NU29020 2 Lb 14” HdlNU29035 3 Lb 14” HdlNU29033 3 Lb 15” HdlNU29045 4 Lb 14” Hdl



NU27806 6 Lb 32” HdlNU27808 8 Lb 32” HdlNU27810 10 Lb 32” HdlNU27812 12 Lb 32” HdlNU27816 16 Lb 32” HdlNU27818 16 Lb 36” HdlNU27820 20 Lb 32” HdlNU27822 20 Lb 36” Hdl

NU30515 1.5 LbNU30525 2 Lb NU30540 4 Lb

NU11225 12 Oz Med/TuffNU11235 16 Oz Med/TuffNU11275 32 Oz Med/Tuff

NU13110 1 Lb NU13120 2 Lb

DEAD BLOW

BALLPEIN

CLAW OR RIPPING

DRILLING HAMMER

CROSS PEIN

BRASS HAMMERS

LONG HANDLE SLEDGE

RUBBER MALLET

SOFT FACE HAMMERS

STRIKE PRO DEAD BLOW

$17.42$17.42$19.60$19.60

NU10135 16 Oz YellowNU10235 16 Oz OrangeNU10175 24 Oz YellowNU10275 24 Oz Orange

$20.02$21.36$23.57$25.42$28.17$32.13$42.08$47.39

$34.53$36.81

$34.95$37.10

$27.80$29.32$30.52

$31.06$32.68$34.66

$32.92$35.90

$32.82$36.28$35.09$38.79

$42.95$49.81$60.40

$26.91$30.41$33.04

$47.99$54.07$60.76$75.06$91.76$93.68119.45122.64

$21.22$28.33

$39.57$60.08$104.59

$22.04$23.63$31.48

NU59800 32” FiberglassNU59801 36” Fiberglass

REQUIRES NO EPOXY

MECH/LOC REPLACEMENT 2 - 4 LB SLEDGE HAMMER HANDLES

NU59987 14” FiberglassNU59989 16” Fiberglass

REQUIRES NO EPOXY

NU59780 16” FiberglassREQUIRES NO EPOXY

$16.22


LIFETIME FIBERGLASS

HANDLES

LIFETIME FIBERGLASS HANDLES


LIFE-TIME

FIBER-GLASS HAN-DLES


LIFETIME FIBER-GLASS

HANDLES

LIFE-TIME

FIBER-GLASS HAN-DLES




LIFETIME FIBERGLASS

HANDLES


DOUBLE FACE SLEDGE HAMMERS 3 lb. to 16 lb. have drop forged, heat treated and tempered carbon steel sledge heads with dual machined striking faces and chamfers. Shock absorbing American hickory handle, lacquer finished, has a contoured grip style for secure handling during hard blows. Head is chemically bonded and wedged for safety and performance making a secure head-handle connection. Ideal head-to-handle weight distribution for perfect balance.

Hickory Handle Sledge Hammers, Cross Pein & DrillingPart # Weight Handle Length DescriptionNU06105 3 LB 15" 3Lb Cross Pein HammerNU06110 4LB 16" 4Lb Sledge HammerNU06111 6 lb 32" 6 lb Sledge HammerNU06112 8LB 32" 8Lb Sledge HammerNU06113 10LB 32" 10Lb Sledge HammerNU06114 10LB 36" 10Lb Sledge HammerNU06115 12LB 32" 12LB Sledge HammerNU06116 16LB 32" 16Lb Sledge HammerNU06117 16LB 36" 16Lb Sledge HammerNU06118 12LB 36" 12LB Sledge HammerNU06119 2LB 16" 2Lb Sledge HammerNU06120 3 LB 10.5 3Lb Drilling HammerNU06121 8LB 36" 8Lb Sledge Hammer

Hickory Replacement HandlesPart # Handle Lgth DescriptionNU06150 36” 36" Replacement Handle Kit, Hickory Fits 6-16Lb SledgeNU06151 16” 16" Replacement Handle Kit, Hickory Fits 2-4Lb HammersNU06157 10.5" 10.5" Replacement Handle Kit,Hickory, Fits 3lb Hand DrillingNU06158 32" 32" Replacement Handle Kit, Hickory,Fits 6-16LB Sledge

23.54 24.21 42.86 46.60 55.92 60.59 60.59 68.60 70.36 68.05 21.08 23.72 47.09

11.00 11.43 11.43 11.00

3” and 4” Replaceable Tips

Hanson/Irwin Bolt Extractors

13 PC SET1/4” TO 3/4”

3/8” Dr.

$142.61

5 PC Bolt Extractor Set3/4”- 1” 1/2” Dr

$97.20

Hanson/Irwin Screw Extractors

HANSON/Irwin Multi-Spline Extrac-tor is designed to remove broken studs, bolts, socket screws, and fittings. Hex shank designed to be used with socket or flat wrench

HA5322610 PC SET

1/8” through 13/32”

$28.76

HA5322815 PC SET

1/8” through 9/16”

$42.16

HA5322725 PC SET

1/8” through 7/8”

$74.04

Hanson /Irwin Tap & Die Sets

HA9760666 Pc. SAE

Hex 1/4” to 1” NC & NF Tap & Die Set in Plastic Case

Includes HA24606 listed below

HA1420HA1423HA1427HA1429HA1434HA1436HA1439HA1440HA1444HA1445HA1448HA1449HA1452HA1454HA1458HA1460HA1461HA1463HA1465HA1467

HA2464053 Pc. Hex SAE NC-NF Set

1/4” to 3/4”

HA2460641 Pc. Hex SAE NC-NF

Set1/4” to

1/2”$162.66

HA97312 66 Pc. Metric

Hex 3mm to 24mm NC & NF Tap & Die Set in Plastic CaseIncludes 26317 listed below

HA2639453 Pc. Hex Metric NC-NF Set

3mm to 18mm

HA2631741 Pc. Hex

Metric NC-NF Set

3mm to 12mm

$162.66

1/4-20 NC1/4-28 NF5/16-18 NC5/16” - 24 NF3/8 - 16 NC3/8 - 24 NF7/16 - 14 NC7/16 - 20 NF1/2 - 13 NC1/2 - 20 NF9/16 - 12 NC9/16 - 18 NF5/8 - 11 NC5/8 - 18 NF3/4 - 10 NC3/4 - 16 NF7/8 - 9 NC7/8 - 14 NF1 - 8 NC1 - 14 NS

$2.63$2.63$3.29$3.29$4.16$4.16$4.55$4.55$5.20$5.20$7.53$7.53$8.95$8.95$11.80$11.80$15.69$15.69$19.33$19.33

PRICE PLUG TAP SIZE


HEX DIE

3.373.373.37 3.373.373.37 3.373.373.373.378.718.718.71 8.718.718.7119.2819.28 19.2819.28IN

DIV

IDUA

L M

ULTI

- SC

REW

EXT

RAC

TOR

S

1/8”5/32”3/16”7/32”1/4”9/32”5/16”11/32”3/8”13/32”7/16”15/32”1/2”17/32”9/16”19/32”5/8”21/32”11/16”23/32”3/4”25/32”13/16”27/32”7/8”

2.812.812.812.812.812.812.812.812.812.813.113.113.113.223.223.223.223.423.423.423.424.074.074.074.07

SPLINE SIZE PRICE

$302.26 $325.83

$539.24 $539.24

HA53201HA53202HA53203HA53204HA53205HA53206HA53207HA53208HA53209HA53210HA53211HA53212HA53213HA53214HA53215HA53216HA53217HA53218HA53219HA53220HA53221HA53222HA53223HA53224HA53225

Catalog T Buzzard Gulch, Inc. 800-821-2932 Page # 35

INDIVIDUAL TAP & DIE

PART #

HA1902HA1903HA1904HA1905HA1906HA1907HA1908HA1909HA1910

COST

4.095.467.7915.8921.8135.0944.4664.8489.08

HA1921ZR6 Pc Pipe Tap Set

Includes1/8”, 1/4”,3/8”,

1/2”3/4”,1

HA1922ZR6 Pc

Re-threading Hexagon Taper

Pipe Die Set1/8”, 1/4”, 3/8”,

1/2”, 3/4”, 1

SIZE1/8-271/4-183/8-18 1/2-143/4-141-11.5

PART #HA7402 HA7403 HA7404HA7405HA7406HA7407

COST 11.1412.3817.0824.7230.5459.13

IRWIN PIPE TAPS

$138.22

HA394001Hansen’s 5 most popular Bolt Extrac-

tors in Kit Box5/8”,9/16”,1/2”,7/16”,& 3/8”

(11,14,16MM)$36.40

HA394002Hansen’s Next 5 most popular Bolt Extractors

that will fit in the 394001 box with them5/16”,8,10,13,11/16”,3/4”,19

$31.85

HA540099 PC Bolt Extractor

1/4” to 3/4”3/8” Drive$99.38

HA54125

HA54113

SIZE

1/8-271/4-183/8-181/2-143/4-141-11.51-1/4-11.51-1/2-11.52-11.5

Metric on Page 36

Singles Listed Below



IRWIN PIPE DIE

HA30950012 Pc Tap

Adjustable Tap Adapter Set Can Use On Tap From #6 to 1/2” - 3/8 sq.

drive

$27.03

$101.18


1/4-20 NC1/4-28 NF5/16-18 NC5/16” - 24 NF3/8 - 16 NC3/8 - 24 NF7/16 - 14 NC7/16 - 20 NF1/2 - 13 NC1/2 - 20 NF9/16 - 12 NC9/16 - 18 NF5/8 - 11 NC5/8 - 18 NF3/4 - 10 NC3/4 - 16 NF7/8 - 9 NC7/8 - 14 NF1 - 8 NC1 - 14 NS

$2.63$2.63$3.29$3.29$4.16$4.16$4.55$4.55$5.20$5.20$7.53$7.53$8.95$8.95$11.80$11.80$15.69$15.69$19.33$19.33

PRICE TAPER TAP SIZE PRICE

HA1712ZRHA1713ZRHA1717ZRHA1718ZRHA1722ZRHA1723ZR

HA1727HA1729ZRHA1731ZRHA1733ZRHA1734ZR

HA1735HA1736HA1737HA1738HA1739

HA1740ZRHA1741ZRHA1742ZRHA1743ZRHA1744ZRHA1749ZR

HA1750HA1752ZRHA1754ZRHA1755ZRHA1756ZRHA1759ZRHA1761ZRHA1764ZRHA1765ZRHA1768ZRHA1769ZR

$2.71$2.71$2.86$2.86$2.95$2.95$3.12$3.12$3.46$3.65$3.65$4.43$4.43$4.43$4.85$4.85$4.85$5.13$6.12$6.12$6.12$8.15$8.15$8.15$9.32$9.59$9.59

$12.11$12.11$15.58$14.95$19.95$18.30

PRICE$3.59$3.50$3.59$3.59$3.59$3.59$3.59$3.50$3.59$3.59$3.59$3.59$3.59$3.59$3.59$3.59 $3.59$3.59$3.59$3.59$3.59$8.70$9.49$9.49$9.21$9.49$9.49$9.49$9.49

$19.83$19.83$19.83$19.83

HA6612ZRHA6613HA6617HA6618HA6622HA6623HA6627HA6629HA6631

HA6633ZRHA6634HA6635HA6636HA6637HA6638HA6639HA6640HA6641

HA6642ZRHA6643HA6644

HA6949ZRHA6950ZR

HA6952HA6954

HA6955ZRHA6956HA6959

HA6961ZRHA8564ZRHA8565ZR

HA8568HA8569

3mm-0.503mm-0.604mm-0.704mm-0.755mm-0.805mm-0.906mm-1.00

6.3mm-1.007mm-1.008mm-1.008mm-1.259mm-0.759mm-1.009mm-1.25

10mm-1.0010mm-1.2510mm-1.5011mm-1.5012mm-1.2512mm-1.5012mm-1.7514mm-1.2514mm-1.5014mm-2.0016mm-1.0016mm-1.5016mm-2.0018mm-1.5018mm-2.5020mm-2.5022mm-1.5024mm-2.0024mm-3.00


PART #CGAC14CGAT14CGAC16CGAT16CGAC18CGAT18CGAC110CGAT110CGAC112CGAT112CGAC115CGAC118CGAC124

SIZE4”4”6”6”8”8”10”10”12”12”15”18”24”

JAW1/2”1/2”15/16”15/16”1-1/8”1-1/8”1-5/16”1-5/16”1-1/2”1-1/2”1-11/16”2-1/6”2-7/16”

FINISHCHROMEBLACKCHROMEBLACKCHROMEBLACKCHROMEBLACKCHROMEBLACKCHROMECHROMECHROME

PRICE$24.18$20.00$25.07$20.33$25.53$23.62$34.60$29.14$50.06$41.70$78.85$134.01$229.16

V2078606 Handle GripV2078608 Handle GripV2078610 Handle GripV2078612 Handle GripV2078615 No Handle GripV2078618 No Handle GripV2078624 No Handle Grip

6”8”10”12”15”18”24”

1”1-1/8”1-1/4”1-1/2”1-13/16”2-1/42-5/8

13.6314.9317.5224.0244.3777.67149.79

PART # Size Capacity Price

ADJUSTABLE WRENCHES

CHANNELLOCK ADJUSTABLESPART #CH804CH804NCH806WCH806NWCH808WCH808NWCH810WCH810NWCH812WCH812NWCH815NCH815CH818CH818NCH824

CH806WCBCH808WCBCH810WCBCH812WCBCH6WCBCH8WCB

SIZE CAP4” 1/2”4” 1/2”6” 15/16”6” 15/16”8” 1-1/8”8” 1-1/8”10” 1-3/8”10” 1-3/8”12” 1-1/2”12” 1-1/2”15” 1-11/16”15” 1-11/16”18” 2-1/8”18” 2-1/8”24” 2-3/8”

6“ 15-16”8” 1-1/8”10” 1-3/8”12” 1-1/2”6” 1-3/8”8” 1-1/2”

FINISH CHROMEBLACKCHROMEBLACKCHROMEBLACKCHROMEBLACKCHROMEBLACKBLACKCHROMECHORMEBLACKCHROME

Code BlueCode BlueCode BlueCode BlueCode BlueCode Blue

PRICE$12.82$11.84$13.64$12.98$15.05$14.25$18.31$17.72$26.29$25.28$40.42$43.27$82.80$80.85$160.40

$16.16$18.83$22.92$31.93$21.71$23.37

CODE BLUE

BGWA-06 6”BGWA-08 8”BGWA-10 10”BGWA-12 12”BGWA-15 15”BGWA-18 18”BGWA-24 24”

4.34 5.79 7.24 8.69 20.83 27.53 46.51

ADJUSTABLE WRENCHES

BGWA-315”,18” 24”

3 Pc. Adjustable Wench Set

$68.38

BGWA-56”,8”,10”,12”,15”


$38.94

BGWA-76”,8”,10”,12”,15”18”,24”


$90.45

NES-2 (02000)11/16” to 1-1/2” RETHREADER OR 17MM TO 38MM

EXTERNAL UNIVERSAL

THREAD RESTORER

EXTERNAL UNIVERSAL THREAD

RESTORER

NES-3 (03000)1-1/4” TO 5”

RETHREADER OR 32MM TO 128MM

NES-21 (07210)5/16” TO 7/16”

INTERNAL RETHREADER 8MM TO 11MM$74.31

NES-1A (06000)1/4” TO 3/4”

RETHREADER OR 6MM TO 19MM

$66.87

ADJUSTABLE RE-THREADING TAP

INTERNAL

NES-22 (07220)1/2” TO 5/8”

INTERNAL RETHREADER 12MM TO 16MM

$74.31

ADJUSTABLE RE-THREADING TAP INTERNAL

NES-23 (07230)11/16” TO 13/16”


$81.00


NES-24 (07240)7/8” TO 1-1/4”


$107.79


COMBINATION SET

External 1External 2Internal 21Internal 22Internal 23Internal 24

Kit Box

NES EXTERNAL SETNES External 1

External 2External 3

Kit Box

NES 123 (01300)

EXTERNAL UNIVERSAL THREAD RESTORER$97.56 $273.61

NES 1025 $442.94

PLUG TAP SIZE HEX DIE PRICE

IRWIN HANSENINDIVIDUAL METRIC TAP & DIE

USA

$433.33

IRWIN ADJUSTABLES

13.3613.3613.3614.5015.5817.8518.9621.1622.3124.5530.4730.4733.2133.2339.8739.8748.2351.7651.76

KD9008 1/4”KD9010D 5/16”KD9011D 11/32”KD9012D 3/8”KD9014 7/16”KD9016D 1/2”KD9018D 9/16”KD9020 5/8”KD9022 11/16”KD9024 3/4”KD9026D 13/16”KD9028D 7/8”KD9030 15/16”KD9032 1”KD9034 1-1/16”KD9036 1-1/8”KD9038D 1-1/4”KD9060D 1-5/16”KD9062D 1-3/8”

THE ORIGINAL GEAR WRENCH BRANDKD9317 7 Pc. 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, & 3/4”KD9308D 8 Pc. same plus 11/16”KD9309D 4 Pc. 13/16”, 7/8”, 15/16”, & 1”KD9312 13 Pc. same as 9308 plus 9309 and add 1/4”KD9412 12 Pc. 8,9,10,11,12,13,14,15,16,17,18, & 19KD9417 7 Pc. 8,10,12,13,14,15 & 18KD9413 4 Pc. 21,22,24, & 25KD9416 16 Pc. 8,9,10,11,12,13,14,15,16,17,18,19,20,21,22 & 24

KD9040 1-7/16”KD9042 1-1/2”KD9044 1-9/16”KD9046D 1-5/8”KD9048D 1-11/16”KD9050D 1-3/4”KD9052D 1-13/16”KD9054D 1-7/8”KD9056D 2”

KD9106 6MMKD9107 7MMKD9108D 8MMKD9109 9MMKD9110D 10MMKD9111 11MMKD9112 12MMKD9113D 13MM

KD9114D 14MMKD9115D 15MMKD9116D 16MMKD9117D 17MMKD9118D 18MMKD9119 19MMKD9120 20MMKD9121 21MMKD9122 22MMKD9124 24MMKD9125D 25MMKD9127D 27MMKD9130D 30MMKD9132 32MMKD9134D 34MMKD9136 36MMKD9141D 41MMKD9146D 46MMKD9150 50MM

KD9533N 8 Pc. 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16” & 3/4”KD9509N 13 Pc. all SAE 5/16” to 1”KD9545N 4 Pc. 13/16”,7/8”,15/16”,1KD9601N 4 Pc. 21mm, 22mm, 24mm, 25mmKD9620N 12 Pc. 8,9,10,11,12,13,14,15,16,17,18, & 19KD9602N 16 Pc. 8,9,10,11,12,13,14,15,16,17,18,19,21,22,24,25

KD9525ND 5/16”KD9521ND 11/32”KD9526ND 3/8”KD9527N 7/16”KD9528N 1/2”KD9529N 9/16”KD9530ND 5/8”KD9531ND 11/16”KD9532N 3/4”KD9534N 13/16”

KD9538N 7/8”KD9539N 15/16”KD9540N 1”

KD9608N 8MMKD9609N 9MMKD9610N 10MMKD9611N 11MMKD9612N 12MMKD9613N 13MM

KD9614N 14MMKD9615N 15MMKD9616N 16MMKD9617N 17MMKD9618N 18MMKD9619N 19MMKD9621N 21MMKD9622N 22MMKD9624N 24MMKD9625N 25MM

STUBBY COMBINATION GEAR WRENCHESKD9507D 7 Pc. 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16” & 3/4”KD9520D 10 Pc. 10,11,12,13,14,15,16,17,18, & 19

KD9500DD 3/8”KD9501DD 7/16”KD9502D 1/2”KD9503D 9/16”KD9504D 5/8”KD9505D 11/16”

KD9506D 3/4”KD9510DD 10MMKD9511D 11MMKD9512D 12MMKD9513D 13MMKD9514D 14MM

KD9515D 15MMKD9516D 16MMKD9517D 17MMKD9518D 18MMKD9519D 19MM

$75.19$99.28

$113.42$218.53$147.06$75.19

$112.70$255.04

74.91 74.91 89.91 89.91 107.89 107.89 129.46 129.46 155.36

13.36 14.56 13.36 13.36 14.50 15.58 16.72 17.85

16.4317.6517.7619.1821.9423.2526.0327.3830.1636.52

36.5242.8542.85

16.4316.4317.7619.1820.5421.94

14.5015.5817.8518.9621.1622.31

24.5514.5015.5816.7217.8518.96

20.0921.1622.3124.5524.55

$95.98 $139.69

$117.27$269.02$135.05$135.05$184.65$326.07


23.2524.6626.0327.3830.1630.1636.5136.5142.8542.85

REVERSIBLE COMBINATION GEAR WRENCHES

18.96 20.09 21.16 22.31 24.55 24.55 30.47 30.47 30.47 33.23 33.23 39.87 43.85 48.23 53.06 74.91 89.91 129.46 155.36

ER960Greg’s Drip Free Oil Filter Funnel Orange

ER6014M40 Tool “Space Saver”

Wrench Rail Kit w/Mag Red

ER6015M40 Tool “Space

Saver” Wrench Rail Kit w/Mag Black

KD9700 7 Pc. 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, & 3/4”KD9701 8 Pc. 5/16”,3/8”,7/16”,1/2”,9/16”,5/8”,11/16”, & 3/4”KD9702D 13 Pc. 5/16”,11/32”,3/8”,7/16”,1/2”,9/16”,5/8”,11/16”,3/4”,13/16”,7/8”,15/16”,1”KD9703 4 Pc. 13/16”,7/8”,15/16”,1”

KD9900D 7 Pc. 10,12,13,14,15,17, & 19KD9901D 12 Pc. 8,9,10,11,12,13,14,15,16,17,18 & 19KD9902D 16 Pc. 8,9,10,11,12,13,14,15,16,17,18,19,21,22,24 & 25KD9903D 4 Pc. 21,22,24,25

$132.08$166.62$327.71$150.23

$132.08$226.68$393.23$150.23

KD9704D 11/32”KD9705 5/16”KD9706 3/8”KD9707 7/16”KD9708 1/2”KD9709 9/16”KD9710 5/8”KD9711 11/16”KD9712 3/4”KD9713 13/16”

K-D FLEX GEAR WRENCH

KD9714D 7/8”KD9715D 15/16”KD9716D 1”

KD9908D 8MMKD9909D 9MMKD9910D 10MMKD9911D 11MMKD9912D 12MMKD9913D 13MM

KD9914D 14MMKD9915D 15MMKD9916D 16MMKD9917 17MMKD9918 18MMKD9919D 19MMKD9921D 21MMKD9922D 22MMKD9924D 24MMKD9925D 25MM

26.9525.8127.1428.5129.8431.2332.5833.9735.3248.90

48.9058.5358.53

24.4025.1825.8127.1427.8828.51

29.8431.2332.5833.9735.3236.6948.9048.9058.5358.53

Page 38 Catalog T Buzzard Gulch, Inc. 800-821-2932

K-D X-LONG GEAR WRENCH (20% Longer)KD85198 8 Pc. 5/16”,3/8”,7/16”,1/2”,9/16”,5/8”,11/16”, & 3/4”KD85199 13 Pc. 1/4”,5/16”,3/8”,7/16”,1/2”,9/16”,5/8”,11/16”,3/4”,13/16”,7/8”,15/16”,1”

KD85098 12 Pc. 8,9,10,11,12,13,14,15,16,17,18, & 19KD85099 16 Pc. 8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,& 24

$123.11$270.98

$182.36$316.22

KD85108 1/4”KD85110 5/16”KD85112 3/8”KD85114 7/16”KD85116 1/2”KD85118 9/16”KD85120D 5/8”KD85122D 11/16”KD85124D 3/4”KD85126 13/16”KD85128 7/8”

KD85130 15/16” KD85132 1”

KD85007 7MMKD85008D 8MMKD85009 9MMKD85010 10MMKD85011 11MMKD85012 12MMKD85013D 13MM

KD85014 14MM KD85015 15MMKD85016 16MMKD85017 17MMKD85018 18MM KD85019 19MMKD85020 20MMKD85021 21MMKD85022 22MMKD85024D 24MM

17.5417.5418.7219.3520.8521.4423.5725.0927.8131.4531.45

37.4837.48

15.9317.5418.1318.7219.3519.9420.85

21.4422.3723.5725.0926.2727.8131.4531.4531.4537.48

ERNST TOOL ORGANIZERS/SHOP SOLUTIONS$22.68 ER8450

3 Rail Universal Twist Lock Socket

Tray Red Rails 1/4”, 3/8” & 1/2”

ER84513 Rail Universal

Twist Lock Socket Tray Blue Rails 1/4”,

3/8” & 1/2”

$22.68 ER84532 Rail Universal

Twist Lock Socket Tray Red

Rails 3/8”

$16.80

ER8419M13” Magnetic

Socket Organizer and 11 Twist Lock

Clips Blue 1/2”

$15.95 ER8412M8” Magnetic

Socket Organizer and 7 Socket Clips

Red 1/2”

$15.11 ER8409M8” Magnetic

Socket Organizer and 7 Socket Clips

Blue 1/2”

$15.11 ER841613” Socket

Organizer and 11 Twist Lock Clips

Red 1/2”

$6.70

ER604014 Tool No-Slip

Low-Profile Screw-driver Rail Set Red

$10.06

ER531010 Tool Screwdriver

Gripper Red

$6.70

$16.80 $16.80 ER523030 Tool Wrench Tool Tower Red

$16.80

$16.80


Nylon Socket Rails - Printed w/ size IDEach holder has a

recessed spring ball to hold the socket

and is marked with the size that goes

there.

CTA9720CTA9725CTA9730CTA9735CTA9750CTA9755

PART #

1/4” SAE1/4” MM3/8” SAE3/8” MM1/2” SAE1/2” MM

1/8” - 5/8”4MM - 15MM1/4” - 1”8MM - 20MM3/8” - 1-1/4”8MM - 24MM

131313131517

DESCRIPTION SOCKET SIZES # OF HOLD-ERS

$5.25$5.25$5.25$5.25$9.25$9.25

PRICE

L401201/4” 26 Pc. Magnetic Socket

Tool Holder Holds Up to 5/8” or 15mm

Red in color

$18.07


Tool Holder Holds Up to 5/8” or 15mm

Black in color

$18.07


Tool Holder Holds Up to 1” or 24mm

Red in color

$22.59


Tool Holder Holds Up to 1” or 24mm

Black in color

$22.59


Tool Holder Holds Up to 1-1/8” or 27mm

Red in color

$29.82


Tool Holder Holds Up to 1-1/8” or 27mm

Black in color

$29.82

SS-1414 Pc. WRENCH POUCH

3/8” TO 1-1/4”

Cordura fiber, Lightweight, extremely durable, abrasion resis-tant, unaffected by rot or mildew

CHOICE $29.56

HG1401HG1402HG3801HG3802HG1201HG1202HG92000

PART #

1/4” SAE1/4” MM3/8” SAE3/8” MM1/2” SAE1/2” MM1 OF EACH

3/16” - 5/8”4.5MM - 15MM1/4” - 1”6MM - 20MM3/8” - 1-1/4”10MM - 27MMALL THE ABOVE

222626302834166

DESCRIPTION SOCKET SIZES # OF HOLD-ERS

$9.95$9.95$9.95$9.9511.9511.9559.99

PRICE

SAE TRAYS ARE RED IN COLORMETRIC TRAYS ARE GREY IN COLOR

SS-MMMETRIC WRENCH POUCH

7MM TO 24MM

PR4010PR4011PR4020PR4021PR4041PR4040PR4030PR4031PR2041PR2040PR2021PR2020PR2011PR2010

PART #15PC15PC15 PC15 PC 15 PC15 PC15 PC15 PC12 PC12 PC12 PC12 PC12 PC12 PC

1/4” TO 1-1/4” OR 6mm to 30mm1/4” TO 1-1/4” OR 6mm to 30mm1/4” TO 1-1/4” OR 6mm to 30mm1/4” TO 1-1/4” OR 6mm to 30mm1/4” TO 1-1/4” OR 6mm to 30mm1/4” TO 1-1/4” OR 6mm to 30mm1/4” TO 1-1/4” OR 6mm to 30mm1/4” TO 1-1/4” OR 6mm to 30mm1/4” TO 1” OR 6mm to 24mm1/4” TO 1” OR 6mm to 24mm1/4” TO 1” OR 6mm to 24mm1/4” TO 1” OR 6mm to 24mm1/4” TO 1” OR 6mm to 24mm1/4” TO 1” OR 6mm to 24mm

NON MAGMAGNETICNON MAGMAGNETICMAGNETICNON MAGNON MAGMAGNETICMAGNETICNON MAGMAGNETICNON MAGMAGNETICNON MAG

REVERSEREVERSEREVERSEREVERSEREVERSEREVERSEREVERSEREVERSEREVERSEREVERSEREVERSEREVERSEREVERSEREVERSE

BLACKBLACKREDREDGREENGREENYELLOWYELLOWGREENGREENREDREDBLACKBLACK

• Reversible Wrench Rack saves space in your tool storage area! • Reverse the direction of the wrenches so now the longest wrenches are on the bottom and not the top allowing the user to put the Wrench Rack next to the Stan-dard Wrench Rack and still see the size of the wrench! • Organize your wrenches quickly and easily • Easy to store or remove wrenches from Wrench Rack • Superior design fits most wrenches (Wrench sizes fitting Wrench Rack will vary by manufacturer) • Easily mountable on wall • Holds a 1” combination wrench in a drawer with a height of 2” • Made from high density plastic mate-rial for durability, impact resistant and longevity

PR3010PR3040PR3041PR3030PR3031PR3020PR3021PR3011PR1021PR1040

15 PC 15 PC15 PC15 PC15 PC15 PC15 PC15 PC12 PC12 PC

1/4” TO 1-1/4” OR 6mm to 30mm1/4” TO 1-1/4” OR 6mm to 30mm1/4” TO 1-1/4” OR 6mm to 30mm1/4” TO 1-1/4” OR 6mm to 30mm1/4” TO 1-1/4” OR 6mm to 30mm1/4” TO 1-1/4” OR 6mm to 30mm1/4” TO 1-1/4” OR 6mm to 30mm1/4” TO 1-1/4” OR 6mm to 30mm1/4” TO 1” OR 6mm to 24mm1/4” TO 1” OR 6mm to 24mm

NON MAGNON MAGMAGNETICNON MAGMAGNETICNON MAGMAGNETICMAGNETICMAGNETICNON MAG

REGULARREGULARREGULARREGULARREGULARREGULARREGULARREGULARREGULARREGULAR

BLACKGREENGREENYELLOWYELLOWREDREDBLACKREDGREEN

$8.05

8.05 14.26

8.0514.26

8.0514.2614.2612.08

7.29

8.05 14.26

8.0514.2614.26

8.058.05

14.2612.08

7.2912.08

7.2912.08

7.29

WRENCH RACKS MAGNETIC / NON MAGNETIC

PR4030-30302 PC SET - YELLOW

15 PC RACKS 1 EA STANDARD

(4030) & REVERSE (3030) *call about

other colors available

PR4031-30312 PC SET - YELLOW15 PC MAGNETIC

RACKS 1 EA STANDARD

(4031) & REVERSE (3031) *call about

other colors available

$25.44save $3.08

$14.36save $1.74

AN ORGANIZED SYSTEM FOR STORING WRENCHESWrench Racks are a slick, convenient way to keep box and open end wrenches ready for instant access. Molded of ABS plastic, racks arrange wrenches by size and display those sizes in easy to read, white grease resistant ink. The fractional and metric sizes feature a triangular, side-by-side shape to take up minimum drawer space. Racks also have a molded-in carry handle, pegboard slots and are oil, grease & solvent resistant.

Organizes 13 wrenches by size, fractional or metric.

Angled wrench slots assure clearance in 2-inch deep toolbox drawers.

Made in U.S.A. of tough ABS plastic. Wrenches not included.

HG5301SAE

1/4” - 15/16”

$5.02HG5302METRIC

6mm - 18mm

$5.02

L40460Pliers/Wrench Rack is BlackHolds 13 Tools2 different size slots (tools not

included)

L40490Pliers/Wrench

Rack is RedHolds 13 Tools2 different size slots (tools not

included)

$18.07 $18.07

ORGANIZE YOUR SHELF,

TOOL BOX, WORK SPACE

16 Pc. Mayhew Hollow Punch Kit15 Punch Sizes: 1/8”, 3/16”,

1/4” 5/16”, 3/8” 7/16”, 1/2”, 9/16”, 5/8”, 3/4” 7/8”, 1”, 1-1/16”, 1-1/8”, 1-3/16”

with handle

MAY62060/480K8 Pc. Short Knurled Pin

Punch Set

1/16”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16” all knurled handle and 4” long

2 year warranty

$33.41

MAYHEW INDIVIDUAL PUNCHES, CHISELS

MAY25000MAY25001MAY25002MAY25003MAY25004MAY25005MAY25006MAY25007MAY25008MAY25009MAY25010MAY25011MAY25015MAY25016MAY25017MAY25019MAY25021MAY25023MAY25027MAY25029

1/16”5/64”3/32”1/8”5/32”3/16”7/32”1/4”5/16”3/8”7/16”1/2”2mm 2.5mm3mm4mm5mm6mm7mm8mm

NUMBER SIZE

MAYHEW PILOT/ROLL PIN PUNCHES

MAY24000MAY24001MAY24002MAY24003MAY24004

1/4”5/16”3/8”1/2”5/8”

NUMBER SIZE

MAYHEW CENTER PUNCHES MAYHEW SOLID PUNCHES

MAY20004MAY20000MAY20001MAY20005MAY20002MAY20003MAY20105MAY20301

1/16”3/32”1/8”5/32”3/16” 1/4”5/16”3/8”

NUMBER SIZEMAYHEW LINE UP PUNCHES

MAY22021MAY22010MAY22000MAY22011MAY22012MAY22025MAY22003MAY22005MAY22013MAY22017MAY22024MAY22006MAY22007MAY22008

3/32”1/8”5/32”5/32”3/16”7/32”1/4”1/4”5/16”3/8”1/2”3/16”1/4”5/16”

NUMBER SIZE LNG

888910101215121518121416

COST5.855.956.836.187.938.2710.9615.3010.4416.2328.069.0311.5415.06

LNG

55555566.5

COST

3.974.294.384.384.385.446.108.45

LNG

44.5566.25

COST

3.563.744.115.316.76

LNG2.753.253.544.54.555.566663.253.544.54.55.566

COST

4.664.885.215.366.056.187.118.028.789.5910.8712.225.956.466.466.568.658.658.659.87

MAYHEW COLD CHISELSREGULAR AND EXTRA LONG

1/4”5/16”3/8”7/16”1/2”1/2”1/2”5/8”5/8”3/4”3/4”3/4”7/8”7/8”7/8”1”1”1”

NUMBER SIZE LNG

555.5669126.512712187.5121881218

COST

4.484.594.885.465.936.868.706.168.977.7010.5413.7910.0913.9418.6913.1314.5519.36

MAYHEW EXTRA LONG PIN PUNCHES

MAY21500MAY21501MAY21502MAY21503MAY21504MAY21505MAY21506

1/8”3/16”1/4”5/16”3/8”7/32”5/32”

NUMBER SIZE LNG

8” 8”8”8”8”8”8”

COST

6.566.917.187.217.217.166.91


MAYHEW PRICKPUNCHES

NUMBER SIZE LNG COST

MAYHEW RIVIT BUSTER

MAYHEW RIVIT SET TOOL

MAYHEW PIN PUNCHES

MAY21000MAY21001MAY21002MAY21003MAY21004MAY21005MAY21011MAY21019MAY21100MAY21103MAY21104MAY21105MAY21302MAY21401

1/16”3/32”1/8”5/32”3/16”1/4”7/32”5/16”3/16”1/4”5/16”3/8”3/8”1/2”

NUMBER SIZE LNG

44.54.7555.255.755.566666810

COST

4.344.444.444.454.714.744.745.085.715.635.715.687.689.87

1/4”5/16”3/8”1/2”

MAY23000MAY23001MAY23002MAY23003

44.556

3.623.844.245.76

MAY10200 MAY10201MAY10202MMAY10204MAY10205MAY10206MAY10207MAY10209MAY10210MAY10212MAY10213MAY10215MAY10216MAY10217MAY10219MAY10220MAY10221MAY10222

MAYHEW HAND GUARDED COLD CHISELS

MAY85213MAY85220MAY85221MAY85212

3/4”1”1”3/4”

NUMBER SIZE COST

12.7616.3813.6411.24

121287

106001060110602M106031060410605M

1/8”3/16”1/4”5/16”3/8”1/2”

$6.35$6.86$7.41$8.47$9.87$11.84

216002160121602

1/16”5/64”3/32”

2170121702217032170421705217062170721708

1/16”3/32”1/8”5/32”3/16”7/32”1/4”5/16”

$3.44$3.61$3.61

$3.71$3.72$3.72$3.81$3.81$3.91$3.91$4.61

Knurled Pin Punch

Mini Knurled Pin Punch

Diamond Point Chisel

3/4”MAY11300 6.25 8.75

20900 8.355/8” 5”

MAY66000 $207.96 MAYHEW CAPE CHISELS

NUMBER

MAY10402mMAY10403MAY10404MAY10405

SIZE

1/4”5/16”3/8”1/2”

LNG

5.6256.2578

COST

8.358.609.9712.44

2 yr. warranty

2 yr.warranty

2 yr. warranty

28 Pc. Mayhew Hollow Punch Kit

25 Hollow Punches Rang-ing from 1/8” to 2”

Mandrel and Center Point

MAY66080 $486.40

MAY62030/4106K

6 Pc. Punch Kit

Center 5/16”Prick 3/8”

Solid 1/8”, 3/16”Pin 3/16”, 1/4”

$28.02

MAYHEW PRO LIFETIME WARRANTY & MAYHEW SELECT 2 YR WARRANTY

MAY61005/751K6 Pc. Punch & Chisel

SetPin Punch 1/8, 3/16”

Center Punch 3/8”Solid Punch 3/16”Chisels 1/2”, 5/8”

$34.09

2 YR WARRANTYMAY61025/754K

8 Pc. Punch & Chisel SetPin Punch1/8,3/16”,1/4”

Center Punch 3/8”Solid Punch 3/16”

Chisels 3/8”, 5/8”,1/2”

$37.19

MAY61044/7014K14 Pc. Punch & Chisel Set

Center Punch 3/8”Solid Punch 1/8”,

3/16”Pin Punch 3/32”,

1/8”, 5/32”, 3/16”, 1/4”

Line Up 1/8”Chisel 1/4”, 3/8”,

1/2”, 5/8”, 3/4”

$77.26

MAY61050/7024K24 Pc. Punch & Chisel

SetPrick Punch 5/16”

Center Punch 3/8”, 1/2”Cape Chisel 1/4”

Round Pt Chisel 1/4”Diamond Pt Chisel 1/4”Pin Punch 3/32”, 1/8”,

5/32”, 3/16”, 1/4”, 5/16”

Solid Punch 1/4”, 3/16”, 5/32”, 1/8”, 3/32”,

5/16”Chisel 1/4”, 5/16”, 3/8”,

1/2”, 5/8”, 3/4”

$137.28

MAY90002Baltimore by

Mayhew

5Pc. Chisel Set

1/4”, 3/8”, 1/2”, 5/8”,

3/4”2 yr warranty

$25.81

MAY62230/123K

3 Pc. Long Line Up Punch Set3/16” x 12”1/4” x 14”

5/16” x 16”

$37.76

MAY613603 Pc. Brass Drift Punch Kit Knurled

3/8” x 6”1/2” x 7”3/4” x 8”

$38.43

MAY76235/125K4 Pc. Long Line Up Punch Set

1/8” x 8”5/32” x 9”

3/16” x 10”1/4” x 12”

$30.85

MAY622774 Pc. Brass Punch

Kit KnurledDrift 3/8” x 6”Pin 1/4” x 4”Pin 3/8” x 6”

Solid 1/4” x 6”

$33.47

MAY62020/4105K5 Pc. Punch Kit

Solid 3/16” x 5”

Pin 1/8” x 4-3/4, 5/32” x 5”,

3/16” x 5-1/4” 1/4” x 5-3/4”

$25.25

MAY76065/446K2 year warranty

5 Pc. Long Pin Punch Kit

All are 8” Long1/8”, 3/16”, 1/4”, 5/16”,

3/8”

$31.21

MAY62250/106K6 Pc. Pilot/Roll Pin

Punch Set1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”

$45.28

MAY62252/109K9 Pc. Pilot/Roll Pin

Punch Set1/16”, 5/64”,

3/32” 1/8”, 5/32”, 3/16”, 7/32”, 1/4”,

5/16”

$60.93

MAY62254/112K12 Pc. Pilot/Roll

Pin Punch Set1/16”, 5/64”, 3/32” 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”

$92.86

MAY62214/706LK

5 Pc. Center Punch Kit

3/32”, 5/32”, 3/16”, 5/16”,

3/8”

$25.90Buzzard Gulch, Inc. 800-821-2932 Catalog T Page # 41

MAY6104012 Pc. Punch &

Chisel Set3/8” Center Punch, 3/8” Prick Punch, 1/8” Solid

Punch, 3/32” Pin Punch, 1/8” Pin Punch, 5/32” Pin Punch, 3/16” Pin Punch, 1/4” Pin Punch, 5/32”

Line Up Punch, 1/4”, Cold Chisel, 3/8” Cold Chisel,

5/8” Cold Chisel 2 year warranty

$40.74

MAY662506 Pc. Pilot/Roll Pin Punch Set

Metric

3mm, 4mm, 5mm, 6mm, 7mm, 8mm

$45.28

MAY600014 Pc. Heavy Duty Carbon Scraper Set

- 1/2” x 10” - 3/4” x 10”- 1” x 10”- 1-1/2” x 10”

$46.41

3 Pc. Line Up Pry Bar Set

14” & 20” Line-Up 16” Rolling Head

MAYEW DOMINATOR FULL SHANKPRY BARS


MAY60137MAY60140MAY60144MAY60146MAY60148

MAY40138MAY40139MAY40160MAY40162MAY40164MAY40166

5” Curved end7” Curved end12” Curved end18” Curved end24” Curved end

36” Curved end42” Curved end48” Curved end58” Curved end44” Curved end45” Curved end

10”12”17”25”31”

36”42”48”58”44”45”

17.0217.1318.0728.0933.18

64.9671.5197.46

105.93107.50125.73

PART # BLADE LENGTHOVERALLLENGTH PRICE

MAYHEW DOMINATOR FULL SHANK STRAIGHT SCREWDRIVER

MAY60141MAY60143MAY60145MAY60147

MAY40128MAY40129

7” Straight12” Straight18” Straight24” Straight

36” Straight42” Straight

12”17”25”31”

36”42”

16.4017.8027.4432.38

65.9372.56

PART # BLADE LENGTH PRICE

MAYHEW SCREWDRIVERS, PRY BARS, HOOK & PICK & SCRAPERS

MAYHEW LINE UP PRY BARS

MAY40000MAY40001MAY40002MAY40003MAY75004MAY40022MAY40023MAY40024

14”16”20”24”30”38”42”60”

13.3116.3221.1623.4130.2434.7740.4546.99

PART # SIZE OAL PRICENO.

1/2”5/8”3/4”3/4”7/8”3/4”7/8”7/8”

MAYHEW PINCH BARS

MAY75125MAY75126MAY75127

468-S469-S471-S

14”16”20”

11.2915.4518.74

PART # SIZE OAL PRICE

MAYPINCH 3 Pc. Set 14”,16”,20”$41.00

NO.

1/2’5/8”3/4”

MAYHEW ROLLING HEAD PRY BARS

MAY40100MAY40101MAY40102MAY40104

481482483484

9”16”18”22”

10.9713.4616.4023.76

SIZE OAL PRICENO.

3/8”1/2”5/8”3/4”

MAYHEW GOOSENECK WRECKING BAR

MAY41001MAY41002MAY41003MAY41004

705710715717

18”24”30”36”

8.1515.5517.3323.11

PART # SIZE OAL PRICENO.

5/8”3/4”3/4”3/4”

MAYHEW LADYFOOT PRY BARSWITH 90 DEGREE HOOK

MAY40150MAY40152MAY40154

424426428

12”16”21”

20.5422.2130.03

PART # SIZE OAL PRICENO.7/16”9/16”11/16

MAY600004 Pc. Dominator Heavy Duty Hook & Pick Set

- 10” Scratch Awl- 90 Degree Hook- 10” Complex Hook- 10” Curved Hook

$43.15

5 Pc. Pry Bar

Set5”-7”-12”-

18”-24”in a tray

MAY61366$106.83

Save $6.66

MAY61306

MAY42000MAY42001MAY42003MAY42002M

11.3211.3211.3211.32

HOOKS & PICKS SEPERATELYFrom MAY60000

MAY42004MAY42005MAY42006MAY42007

11.8711.8712.0211.87

CARBON SCRAPERS SEPERATELYFrom 60001

- C Hook- 15 Degree Hook- 45 Degree Hook- 45 Degree Long Hook- 60 Degree Long Hook- 90 Degree Long Hook

This set makes reaching radiator hoses, clips, washers and seals an easy taskMAY60002

MAYHEW LONG PICK SET

PART #

468469471472473474475476

MAYHEW PRO IS A LIFETIME WARRANTY MAYHEW SELECT IS A 2 YEAR WARRANTY

Mayhew 18” Die Separating Bar

MAY4128013.91

Mayhew 30” Die Separating Bar

MAY4128520.29

OVERALL LENGTH

OVERALL LENGTH

OVERALLLENGTH

$49.77

MAY60150 3 PC. SET $72.81

2 year warranty

2 yr. warranty

$102.71

8” Index Pry Bar Single Joint





TI171024 Pc. Pry Bar Set

Sizes: 8”, 12”, 18”, & 24”$26.37

MAY66302

4 PC. PRY BAR SET

8”45006$6.55

12”45007$8.98

18”45008$15.26

24”45009$18.00

Pry Bar Sets and Individuals


Set 42.82Save $6.97

MAY66305$34.22 Save 4.56

2 Pc. Cats Paw Flex Driver SetTips flex into position for hard to reach fasteners.

45016 1/4 Bit driver 19.3945017 1/4 Socket driver 19.39

MAY45044Magnetic Telescope

Flashlight Pickup Tool

$24.38

Lighted Magnetic Pen

Pickup Tool

MAY4504516.07

With a capped end and ergonomic de-sign handle for striking, the Dominator®

offers superior comfort and control. Cut sizes include 1/2", 3/4", 1" and 1-1/2".

MAY60004$66.19

Indexible to 180 degress for greater leverage14 Locking Positions for unmatched access

Grooved profile on foot for added traction• Exceeds ANSI requirements•

KD82208

KD82210

KD82216

KD82224

KD82233

$39.13

$42.27

$57.92

$89.24

109.61

Extending Pry Bars

OTC ROLLING HEAD PRY BAR (Lifetime Warranty))

PART #OTC7162 OTC7163OTC7164 OTC7165

LNGT6” 12”16”18”

PRICE$23.27$27.16$29.10$32.99

OTC LONG JIMMY BARS (Lifetime Warranty)

OTC7166OTC7167OTC7168OTC7420OTC7421

SHAFT LENGTH

5/8” X 18”3/4” X 24”7/8” X 30”7/8” X 46”1” X 54”

$25.22$29.10$32.99$78.63$98.05

PART #KD82220KD82248

EXTENDS18”-29”19”-48”

PRICE$ 109.61$ 184.37

with Knurled grip and grooved profile

MAY620154 PC. BEARING RACE PUNCH SET

7/16”, 1/2”, 5/8”, 9/16”

$77.39

MAY28650Cable Op/Ratcheting

Hose Clamp Pliers$102.12

BGPB-4S4 Pc Pry bar With Handle

8”,12”,18”,24”$15.95

BGPB-44 Pc Heal bar With

Handle6”,12”,18”,19.5”

14.31

MAY286552 PC. HOSE CLAMP

PLIER SETSet Includes:

Cable Op/Ratcheting Hose Clamp Pliers,

Hose Clamp Pliers, Easy Access

$175.28

MAY45650HOSE CLAMP

PLIERS$56.93

KD82301D3 Pc, Indexing Pry Bar Set

8”, 10” AND 16” $121.19

Save $18.13




OTC7172

OTC7173

OTC7174

$27.16

$29.10

$38.81

OTC71753 Pc Index Pry Bar Set

$86.59 Save $8.48

TI172244 PC. Titan Jumbo

Pick Set1-Straight1- 90 degree1- Offset1- CurvedBlade is 6” OL is 10”

TI172088 Pc. Screwdriver Set

TI110106-1 Screwdriver

#1 Phillips#2 Phillips

3/16” slotted1/4” slotted

1/4” Nut Driver5/16” Nut Driver

6 Pc. Taper Drift Punch Drift Set

Contains: 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”, Taper Drift

Punches

TE 8256$36.77

TE 8294$58.06

TE 8412$58.28

TEJ8247$47.18

7 Pc. Long Pin Punch Set

Contains: 3/32”, 1/8”,

5/32”, 3/16”, 7/32”, 1/4”,

5/16”, Long Pin Punches Sup-plied in sturdy

vinyl wallet.

TEJ8910$49.65

10 Pc. Roll Pin Punch Set Contains: 3/32”, 1/8”,

5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”Roll

Pin Vinyl Wrap

12 Pc. Punch & Chisel Set

Pin Punches: 1/8”, 3/16”, 7/32”, 1/4” Prick Punch: 3/16”

Lg Taper Punch: 1/8”, 3/16”, 1/4” Cold Chisel: 3/8”,

1/2”, 3/4” Center Punch: 3/16”

Vinyl Wrap

$23.54

TI17710 4 Pc. Mini Pick Set

Curved90 Degree

OffsetStraight

4 pc. Extra Long Taper Punch SetContains: 3/16”,

7/32”, 1/4”, 5/16”

Extra Long Taper Punches, Vinyl

Wallet

SLOTTED6” x 5/16”4” x 1/4”3” x 3/16”stubby 3/16”

PHILLIPS6” x #34” x #23” x #1Stubby # 1

$30.69

3/32” TO 1/2” Transfer Punch set

BGTP28 $15.95

1/2” to 1” Transfer Punch Set

BGTP33$116.00


4-1/2” to 6” long$29.95


5” to 10” long

4 Pc. Extra Long Taper Punch 8”, 12”, 12”,

14 3/4”

BGPC-4B $16.95

BGPC-14$19.95

BGPC-16

$46.21Save

$1.77

MAY66300

Mayhew Select 6 Pc.

Screwdriver Set

MAY6630610 Pc. Mayhew Select

Screwdriver Set

$71.53(SAVE $6.46)

MAY600034Pc Mini Dominator

Hook & Pick Set $14.58

MAY45000 #1 X 3 PhillipsMAY45001 #2 X 4 PhillipsMAY45002 #3 X 6 PhillipsMAY45003 7/32” X 4 SlottedMAY45004 1/4” X 6 SlottedMAY45005 5/16” X 7 SlotMAY45018 #2 X 6 PhillipsMAY45019 #2 x 1.5 PhillipsMAY45020 3/8” X 8 SlottedMAY45021 1/4” x 1-1/2 Slotted

$6.86$7.18$9.02$7.08$7.95$9.89$8.92$4.6611.72$4.71

MAYHEW SINGLESCREWDRIVERS

Contains:may45000•may45001•may45002•may45003•may45004•may45005•

$3.66$6.29


SK86006S-K 9 Piece

Screwdriver Set$91.96

L30280Lisle Automatic Center

Punch5-1/2” Adjustable Pressure Punch

$16.26

Slotted Phillips1/4” x 2-1/4” #0 x 3”1/4” x 4” #1 x 4”5/16”x 6” #2 x 2-1/4”3/8” x 8” #2 x 4”3/8” x 12”

PTW80006$9.09

Perfor-mance

Tool 6 Pc. Torx

Screw-driver SetIncludes

sizes T-10, T-15, T-20, T-25, T-27 and T-30

PTW30900$19.11

Performance Tool 8 Pc.

SAE Nutdriver Set

Includes3/16”,

7/32”, 1/4”5/16”,

11/32”, 3/8”, 7/16”,

1/2”

PTW30901$19.11

Performance Tool 8 Pc.

Metric Nutdriver Set

Includes:5mm, 6mm, 7mm, 8mm,

9mm, 10mm, 11mm, 12mm

PART NUMBER SIZE PIPE CAPACITY COST


RID89435 14” 2”RID89440 18” 2-1/2”RID89445 24” 3”

RID31090 10” 1-1/2”RID47057 12” 2”RID31095 14” 2”RID31100 18” 2-1/2”RID31105 24” 3”RID31110 36” 5”RID31115 48” 6”

RID31120 14” 2”RID31125 18” 2-1/2”RID31130 24” 3”

22.67 29.97 34.53 38.70 55.95 88.50 189.77 294.68 433.47

68.30 102.44 159.68

82.67 111.74 171.54

PIPE WRENCHES

RIDGID ALUMINUM ANGLE PIPE WRENCH

RIDGID ALUMINUM REGULAR PIPE WRENCH

RIDGID STEEL ANGLE PIPE WRENCH


V274101V274102V274103V274104V274105V274106V274107V274108

10” 14” 18” 24” 8” 12” 36” 48”

1-1/2”2”2-1/2”3”1”2”5”6”

PART # SIZE

$22.22$29.05$36.46$52.52$21.37$28.17$107.97$161.96

PRICE

RID31005 8” 1”RID31010 10” 1-1/2”RID31015 12” 2”RID31020 14” 2”RID31025 18” 2-1/2”RID31030 24” 3”RID31035 36” 5”RID31040 48” 6”RID31045 60” 8”

MX00109 10” 1-1/2”MX00110 14” 2”MX00111 18” 2-1/2”

MX00112 10” 1-1/2”MX00114 14” 2”MX00115 18” 2-1/2”MX00116 24” 3”MX00117 36” 5”MX00289 48” 6”

SPARE PARTS AVAILABLE

MX00118 14” 2”MX00119 18” 2-1/2”MX00120 24” 3”

11.5014.3017.9023.3033.8049.50102.10177.00

20.3031.5045.60

21.6031.2049.7072.40141.50280.80

40.4054.8085.80

CAST IRON PIPE WRENCHES

ALUMINUM ANGLE PIPE WRENCH

ALUMINUM STRAIGHT PIPE WRENCH

END CAST IRON PIPE WRENCH

MX00101 8” 1”MX00102 10” 1-1/2”MX00103 12” 2”MX00104 14” 2”MX00105 18” 2-1/2”MX00106 24” 3”MX00107 36” 5”MX00108 48” 6”

SPARE PARTS AVAILABLE

BGWP-08 8” BGWP-10 10”BGWP-14 14”BGWP-18 18”BGWP-24 24”BGWP-36 36”BGWP-48 48”

$6.75$8.50$13.28$17.22$24.50$43.75$90.32

STEEL PIPE WRENCH

BGWP-48”,10”,14”,24”

4 Pc. Steel Pipe Wrench Set

$39.95

BGWP-14A 14”BGWP-18A 18”BGWP-24A 24”BGWP-36A 36”BGWP-48A 48”

15.1324.7537.3875.63

175.95

ALUMINUM PIPE WRENCH

$70.63

BGWP-3A14”,18” 24” 3 Pc.

Aluminum Pipe Wrench Set

BGWP-4A14”,18” 24”,36”4 Pc.

Aluminum Pipe Wrench Set

$137.60

BG = Cheapest We Can Find

CB = New ISO-9001 Certified --Made in China-Lifetime Warranty

V = Irwin Made in China-Lifetime WarrantyRID = Made in the USA

Lifetime Warranty

BGWP-3D3 Pc. Dipped Handle

Pipe Wrench Set14”-18”-24”

$49.95

V2074110V2074114V2074118V2074124

V2074112V2074136V2074148

PART #

$36.98$52.25$65.49$101.65N/A$50.19$164.82$322.81

PRICE

10” 14” 18” 24” 8”12” 36” 48”

SIZECAPACITY

CAST IRON ALUMINUM







QUICK ADJUSTING PIPE WRENCH

11” CAST ALUMINUM VJAW CAPACITY 0-2”

(Same as 14” Pipe wrench)

$29.18

V274001SM

46.50 56.19 63.15 78.75 125.75 222.78 443.22

WHILE SUPPLY LASTS

RID3128020” Straight Hex Wrench

$111.17

C B TOOLS/MAX POWER

WIRING TOOls

IRWIN HAND TOOLSGROOVE LOCK

PLIERSV-JAW

V4935351V2078108V2078110V2078112V2078116V2078120

6”8”10”12”16”20”

1-1/8” 1-3/4”2-1/4”2-3/4”4-1/2”6”

111316192125

n/a1”1-1/2”2”3-3/4”4-1/2”

PART # Size Model Capacity Positions Pipe Price

GROOVE JOINT PLIERSV-JAW

V2078506V2078508V2078510V2078512V2078516

6”8”10”12”16”

1”1-1/2”2”2-1/4”4-1/2”

45779

1”1”2” 2-1/2”4”

8.9010.7913.3415.8522.77

PART # Size Capacity Positions Pipe Price

LONG NOSE PLIERS

With Wire Cutters

V2078216V2078218

6”8”

1-25/32”2-5/16”

23/32”15/16”

7/16”15/32”

13.9915.85

PART # Size Jaw Length Width Thick Price

BENT NOSE PLIERS

With Wire Cutters

V2078226V2078228

6”8”

1-9/16”2”

23/32”15/16”

7/16”15/32”

15.2417.15



V4935095V4935096V4935097V4935098V4935099

8”10”10”12” 12”

17.1920.6321.6524.7525.99

GROOVE LOCK PLIERSSTRAIGHT-JAW

V1773618V4935318V4935317V4935320V4935319V4935321V2078500V4935322V4935323

4-1/2”6”6”8”8”10”10”12”12”

8.018.909.3210.7911.3213.3414.0015.8516.65

PART # Size Jaw Price

GROOVE JOINT PLIERSSTRAIGHT-JAW

StraightStraightSmoothStraightSmoothStraightSmoothStraightSmooth

StraightStraightSmoothStraightSmooth

Same as V-Jaw, Just with Straight Jaw Instead of V.

Same as V-Jaw, Just with Straight Jaw

Instead of V.

V2078406V2078408

6”8”

6.978.25

SLIP JOINT PLIERS WITH WIRE CUTTERS

Part # Size Price

V1773584V1773389V1773388V1773582V1773390V1773583V1773387

11”11”11”11”11”11” 11”

22.2222.2223.9224.0324.2224.4224.62

PART # Size Jaw PriceLong NoseDiagonalFlat NoseNeedle Nose20 de bent nose45 de bent nose90 de bent nose

LONG REACH PLIERSW/O Side Cutters

STEEL HANDLED SLIP JOINT PLIERS

WITH WIRE CUTTERS

Part # Size Price

V1773617V1773616

6”8”

6.647.84

V17736278” Hose Clamp

Pliers

$16.08

Part #CH317CH318CH326CH386

CH5410CH738

CH318CB

Length 8”

8-3/8”6”

5-3/4”10”8”

Codeblue8-3/8”

Price$19.95$25.20$19.44$19.77$16.80$18.05

$31.80

LONG NOSE PLIERS

Part #CH526CH516CH537CH546CH548CH528

Size 6-1/2”6-1/2”7-5/8”6-5/8”8”8”

Price $9.69$15.20$27.77$13.93$15.91$9.97

SLIP JOINT PLIERS

OIL FILTER PLIER

Part #CH212CH215

Length 12”

15.5”

Capacity4.25”5.5”

Price $21.43$25.72

CH8510.5” Fence Plier Staple Starter,

Hammer, 2 staple pullers, Wire Stretcher, Wire

splicer, & 2 wire cutters $28.84

Part #CH909CH908CH909CB

Size 10-2210-2210-22

Price $21.42$17.29$28.02

FENCING TOOL

CH908 Wire Stripper

CH909 and CH909CB Crimper/Cutter

Special FeaturesW/Wire CutterThin NoseW/Fine Side CutterW/Wire Cutting ShearW/Wire Cutting ShearW/Wire Cutter

Special FeaturesW/Side CutterW/Side CutterW/Side CutterW/Bent NoseW/Wire CutterW/Cross Hatch no Side CutterW/Side Cutter

Channellock Pliers

GV6GV8GV10GV12GV16GV20

Press & Slide Button to adjust 1. lower jawMulti Groove Ratcheting 2. System for precise positionng and twice the groove positions

GV8GV10GV10SGV12 GV12S

PART # Model Size Jaw Price

15.0817.1920.6324.7547.4363.29

TONGUE & GROOVEGROOVE JOINT PLIERS


LINESMAN PLIERS

Part # CH424CH426CH428CH420CH430CH440CH460CH480

CH420CBCH430CB

Length 4-1/2”6-1/2”8”9.5”10”12”16”20.25”Codeblue9-1/2”10”

Capacity1/2” 7/8” 1-1/2” 1-1/2”2” cap2-1/4”4-1/4”5-1/2”

1-1/2”2”

Price $13.76$11.90$14.22$14.36$14.93$16.93$28.12$55.06

20.9421.53

Part # CH422CH442CH463CH483

Length 9.5”12”16”20.25”

Capacity1-1/2”2-1/4”4-1/4”5-1/2”

Price $14.55$16.34$31.35$57.52 Part #

CH347CH348

Length 7”8.5”

Capacity1-1/16”1-1/4”

Price$24.35$25.62

Part # CH307CH410CH414

Length 7”

9.5”14”

Capacity1/4 to 5/8”

1-1/8”2”

V-JAW

Price $14.98$16.40$26.70

CHMD-7CB7 pc. MM Code Blue

5m, 6m, 7m, 8m, 9m, 10m, 11m

CHND-7CB7 pc. SAE Code Blue

3/16”, 1/4”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”

NUT DRIVER SET

$37.77

NUTBUSTER-PARROT NOSE

Part # CHN316CB CHN140CBCHN516CBCHN132CBCHN380CBCHN716CBCHN120CB

Size 3/16”1/4”

5/16”11/32”

3/8”7/16”1/2”

Price $5.72$5.72$5.72$5.72$5.72$5.72$5.72

Handle Type

CBCBCBCBCB CBCB

$37.77

Individual Drivers

CUTTING PLIERSPART #CH435CH437CH337CH338CH447CH911

SIZE5”7”7”8”

7.75”9.5”- Cable Cutter

PRICE$20.91$19.37$17.95$19.64$22.97$25.99

CODE BLUEPART#CH338CBCH911CB

SIZE8” CUT PLIER9.5” CABLE CUTTER

PRICE$26.24$32.59

WIL7G6-3/4” Wilde Angle Nose

Slip Joint PlierChrome Handle

$15.70

WILG251B6-3/4” Wilde Angle Nose Slip Joint Plier

Red Handle

$12.21

WILG705B10” Compound Leverage Lock

Ring Plier$31.10

PART #CGH26NCGH28N

SIZE6”8”

PRICE$7.99$8.55

PART#CGCW12HCGCW15CGCW24

SIZE CAP12” 4”15” 5”24” 6”

PRICE$39.09$60.46$80.49

KN8701150 6” KN8701180 7”KN8701250 10”KN8701300 12”KN8701400 16”KN8701560 22”

Part # SIZE COST$38.95$40.99$43.42$59.68$102.50$151.62

KN8603180 7”KN8603250 10”KN8603300 12”

KN71012008” Lever Action Center Cut Mini

Bolt CutterInduction hardened jaws

$65.49

$64.42$72.06$89.58

Bolt End Cutting Nippers

KN6101200$79.94

CEE-TEEPLIERS

CB is Blue and Red Grips for Durabillity and Comfort

KNIPEX PLIER WRENCHGripping, Holding & Bending-13

Adjustments

KNIPEX COBRA PUSH BUTTON STYLE

CB is Blue and Red Grips for Durabillity

and Comfort

CB is Blue and Red Grips for Durabillity

and Comfort

CB is Blue and Red Grips for Durabillity and Comfort

linesman pliersside cutter (diagonal) pliers

SK150166” Diagonal Cutting

Pliers$22.89


3-1/2” to 7”Snap Ring Plier

HI14653 Pc. Quick Change

Lang Snap Ring Plier SetLifetime Warranty

Contains1421S-1434-75

$101.52

HI1421New Quick Change USA

1/8” TO 1” Snap Ring Plier

HI1434USA New Quick Change

1/4” TO 2” Snap Ring Plier

HI75New Quick Change

1-1/2” TO 4” Snap Ring Plier

$54.69

USA

HI87$96.18

A & E LANG USA SNAP RING PLIERS

BGSJP916USA Slip joint plier

with 1/2” wrench on one handle and 9/16” wrench on the other

handle

$22.20

CLC767Leather pliers Holster for narrow tools up to

10” longPliers not included

No Snap

$5.24

CLC768Leather Pliers Holster for

narrow tools up to 10” long Pliers Not Included

with snap

$5.83

Same as the CTA10500 but has the plier pouch included

$14.26

CTA 105504-1 FARMERS

PLIER IN POUCH

CTA886010 Pc. Snap Ring

Pliers SetConverts from internal to

external with a thumb-screw.

$102.81

SK7617Internal Snap

Ring Pliers 0.120 Tip 15.5” Long$85.78

SK7618External

Snap Ring Pliers

0.120 Tip 15.5” Long

$85.78

BGSJP-06 6” 2.85BGSJP-08 8” 3.55BGSJP-10 10” 4.63

slip joint pliers

BGPO2-6 6” 3.37BGPO2- 7 7” 3.96BGPO2-8 8” 4.40

BGPO4-6 6” 3.02BGPO4- 7 7” 4.01BGPO4-8 8” 5.95

BGPO3-6 6” 2.98BGP03-8 8” 4.02

long nose pliers

SK76359” Lock Ring Pliers

$28.57SK76369” Angle Lock Ring

Pliers$28.57

$22.81 $25.88

HI349512 PC. Internal/External

Snap Ring Plier Set

$96.51

HI3483HI3484HI3485HI3486HI3487HI3488HI3489HI3490HI3491HI3492HI3493HI3494

.038”

.038”

.038”

.047”

.047”

.047”

.070”

.070”

.070”

.090”

.090”

.090”

0-degree45-degree90-degree0-degree45-degree90-degree0-degree45-degree90-degree0-degree45-degree90-degree

$9.08 $9.08 $9.08 $9.08 $9.08 $9.08 $10.53 $10.53 $10.53 $14.34 $14.34 $14.34

PART # SIZE ANGLE COST

HI34976 PC. Internal/External

Snap Ring Plier Set

$55.65Includes HI3483, HI3485, HI3486, HI3488, HI3489, HI3491 (Below)

LANG Fixed Tip Snap Ring Pliers

Pliers are convertabible •for use on internal or external snap ringsPliers have a knurled •center screw with spring for easy changing and secure holdSets are in plastic blow •molded caseMade in the USA with •lifetime warranty

CTA10500 4-1 FARMER’S PLIER

Slip Joint Pliers With Wire Cutter and Adjustable

Wrench on One Handle and Pry Bar/Screwdriver

on the other Handle

$9.21

SK7603Hose Pinch Pliers

2 1/2”$48.39

SK7602Mini Hose Pinch

Pliers 1 1/4”$26.27

SK77158 pc. Wire Twister

Pliers Set$281.74

Fast Release CURVED JAW PLIERS W/Wire Cutter

CURVED JAW PLIER W/WIRE CUTTER

10”7”5”4”

$14.82$14.56$14.19$12.69

STRAIGHT JAW LOCKING PLIER

V102L3-10RV302L3-7R

10”7”

$14.82$14.56

CURVED JAW LOCKING PLIER w/o Wire Cutter

$14.82$14.56$14.19

10”7”5

V2-10LWV4-7LWV8-4LW

LOCKING WRENCH WITH WIRE CUTTER

10”7”4”

$19.41$15.26$13.25

V1502L3-9LNV1402L3-6LNV1602L3-4LN

LONG NOSE W/ WIRE CUTTER

9”6”4”

$18.30$15.26$14.37

V12LC/L3

LARGE JAW LOCKING PLIER

12” $22.40

LOCKING “C” CLAMPS

6”11”18”24”

4”6”9”11”18”24”

$13.41$15.32$19.20$24.72$34.56$43.16

V23-8R

LOCKING SHEET METAL

TOOL8” $21.55

V25ZR-9R

LOCKING WELDING CLAMP

9” $25.66

LOCKING PINCH OFF TOOLV29-RR 7” $17.45

V251-9ACLOCKING PANEL CLAMP

9”

$25.03

V211ZR-18DR 9.5” THROAT 0-7 1/2” Jaw Adj. $37.67

V30-9DR 4.75” THROAT 0-4 1/2” Jaw Adj. $18.24


1 1/2”2 5/8”9 1/5” 15 1/2”

1.25 Throat1.50 Throat4.75 Throat2-5/8 Throat9.5 Throat15.5 Throat

V5T-10WRV7T-7WRV9T-5WR

10”7”5”

$16.28$16.02$15.60

Fast Release Long Nose Pliers W/Wire Cutter

Fast Release Locking C-Clamps

V19T-11R 11” 2-5/8” Throat $25.27

0-2 1/8”0-3 3/8”0-8”0-10”

Jaw Adjustment PriceThroat SizeSize

V11T-10CRV13T-7CRV4935581-5CR

10”7”5”

$16.28$16.02$15.60

Fast Release STRAIGHT JAW LOCKING PLIER

V1T-10RV3T-7R

10”7”

$16.28$16.02

V14T-6LN 6” $16.80V15T-9LN 9” $20.13

Fast Release CURVED JAW LOCKING PLIER w/o Wire Cutter

V4935576-10CRV4935578-7CRV4935579-5CR

V502L3-10WRV702L3-7WRV902L3-5WRV1002L3-4WR

LOCKING “C”CLAMPS W/ SELF-LEVELING SWIVAL PADS EXTRA Deep Throat

V37 The Original Locking

Pliers Set 1 EA. 10WR AND 5WR

5 Pc Locking Plier Tool Bag SetContains: 1 ea

10R, 10WR, 7CR, 5WR, 6LN

V1078TRAYCONTAINS: 1 EACH OF

10R, 10CR,7R, 7WR, 7CR, 5WR, 6LN, 9LN, 6R, & 11R

$140.56

V37$24.55

V2077704$65.65

V2078318

8” END CUTTING PLIERS

Jaw Length: 1/2”Jaw Thickness: 1-1/8”Jaw Width: 1-21/32”

With Wire Cutter

$19.67

10” Forged Crimper PliersJaw Length: 1-3/16”Jaw Width: 1-9/32”

Jaw Thickness: 3/16”Designed for crimping

insulated and non-insulated connections & terminals on 10-22 AWG wire

V2078310$23.88

10-1/4” Fencing PliersJaw Length: 13/16”

Jaw Thickness: 19/32”Jaw Width: 3-3/16

Nickel chromium steel construction for overall strength and durability

V2078901

$21.70

8” CABLE CUTTING PLIERS

Jaw Length: 13/16”Jaw Width: 1-1/4”Jaw Thickness: 19/32”Type of Wire: Soft Wire, Copper,

& Aluminum

$20.94

V2078306V2078307V2078308

6”7”8”

13/16”13/16”7/8”

27/32”1-5/32”1-1/8”

13/321/2”3/32”

$13.99$15.85$18.41


DIAGONAL CUTTING PLIERS

With Wire Cutters

V2078328

V2078208V2078209

8” 9-1/2’

1-15/32”1-9/16”

1-3/16”1-1/4”

9/16”5/8”

$15.85$18.41


North American Linesman PliersWith Wire Cutter

V17-6RV19-11RV21-18RV275-24R

Part Number

V17T-6R 6” 1.5” Throat $14.99

V165-4SPV18-6SPV31-9SPV20-11SPV22-18SPV28-24SP

LOCKING “C”CLAMPS W/ SELF-LEVELING SWIVAL PADS

$13.62$22.96$33.63$41.44

104/204Description1. Cage 3 Jaw1. Cage 2 Jaw2. Jaw 5-1/4” Long3. Jaw Head Assembly3. Jaw Head Assembly4. Pin5. T-Handle6. Center Bolt (Dia. 9/16”)”x10”7. Snap Ring8. Tip Protector

PART #

104532045310454104552045510456104571045810459P4

PRICE # 41.35 39.52 28.49 77.18 72.59 5.51 22.05 51.45 4.60 10.12

106/206Description1. Cage 3 Jaw1. Cage 2 Jaw2. Jaw 7” Long3. Jaw Head Assembly3. Jaw Head Assembly4. Pin5. T-Handle6. Center Bolt (Dia 5/8”) x 13”7. Snap Ring8. Transmission Jaw (Optional) ea9. Slide Hammer Adapter (Opt) ea10. Tip Protector

PART #

10653206531065410655206551065610657106581065910654T10661P6

PRICE 51.45 49.61 34.91 100.15 96.48 7.35 26.65 54.13 5.51 36.75 57.89 11.03

108/208Description1. Cage 3 Jaw1. Cage 2 Jaw2. Jaw 9” Long3. Jaw Head Assembly3. Jaw Head Assembly4. Pin5. T-Handle6. Center Bolt (Dia 3/4”)”x16-1/2”7. Snap Ring8. Long Jaw (Optional)9. Extra Long Jaw (Optional) ea10. Transmission Jaw (Optional) ea11. Tip protector

PART #

1085320853108541085520855110561105710858110591105411054L11054TP10

PRICE 77.18 55.13 45.03 131.39 119.44 8.28 32.17 73.50 7.35 48.70 183.75 58.80 13.79

110/210Description1. Cage 3 Jaw1. Cage 2 Jaw2. Jaw 11” Long3. Jaw Head Assembly3. Jaw Head Assembly4. Pin5. T-Handle6. Center Bolt (Dia 3/4”) x 19-1/4”7. Snap Ring8. Long Jaw (Optional) ea9. Transmission Jaw (Optional) ea10. Tip Protector

PART #

11053210531105411055210551105611057110581105911054L11054TP10

PRICE 77.18 65.24 48.70 128.65 122.20 8.28 32.17 83.62 7.35 183.75 58.80 13.79


2

1

6

57

43

2

6

5

7

4

3

All pullers are drop forged •from alloy, heat treated steelwithfine-threadedboltsforextrapullingpower.Jawsareadjustableand/•orreversibletobroadenapplicationsMost3-JawPullersCan•alsobeconvertedto2jawpullers

PART#CTA8000BCTA8005BCTA8010BCTA8020CTA8030

PART#CTA8035BCTA8040BCTA8045BCTA8050BCTA8057

2JAW4”6”7”10”15”

3JAW4”7”8”10”14”

TON2TON5TON5TON7TON13TON

TON2TON5TON5TON7TON13TON

COST$25.22 $40.37 $48.78 $90.87151.48

COST $37.00 $48.78 $68.14 109.39 158.21

CTA030600COMPLETE10PCSETWITHPLASTICDISPLAY

ANDPEGHOOKS

$694.07

Knife-likeedgeson•splitterstominimizedamage to partsScrewtypePullersfor•tight access areasPushPulerforusewith•BearingSplitters

PART#CTA8060CTA8065CTA8150CTA8155 PART#CTA8070CTA8077CTA8092CTA8099

SPLITTERSUPTO2-1/4”UPTO4-1/4”UPTO6”UPTO8”

PULLERSScrewType3LbSlideHammer5LbSlideHammerPushPuller

COST$32.78 $69.82 143.06 239.91

COST$47.62$58.89$80.77$75.72

CTA031900COMPLETE8PCSETWITHPLASTICDISPLAY

ANDPEGHOOKS

$668.93

L313302 Jaw or 3 Jaw Reversible and Adjustable

5 Ton Puller5-1/2” Reach 7” Spread 5 tons

$66.03L41670

2 Jaw 2 Ton Puller3-1/2” Reach

4” Spread$19.87

L416902 Jaw Reversible and Adjustable

5 Ton Puller5-1/2” Reach 6” Spread 5 tons

$56.07L41700

2 Jaw Adjustable 5 Ton Puller5-1/2” Reach

6” Spread 5 tons

$32.10

L313203 Jaw 2 Ton Puller

3-1/2” Reach4” Spread

$24.40

OTC92710 Ton Capacity Push Puller

Reach 8-1/4”Spread 2-1/8” to 7-14”

$169.92

CTA8600SMALL ADJUSTABLE GLAND NUT

WRENCHGland Nuts 1” TO 3.75”

$28.58OTC1124

1/2” to 5-3/4” OTCBEARING SPLITTERScrew size 5/8” - 18

$203.93OTC1123

1/2” to 4-5/8” OTCBEARING SPLITTERScrew size 5/8” - 18

$92.22

OTC7463ADJUSTABLE GLAND NUT WRENCH

Gland Nuts 1” to 3.75”1/2” Drive

$54.35

MANYOTHEROTCPULLERS,PUSHPULLERSAND

BEARINGSPLITTERS.CALLFORMOREINFORMATION

CTA8605SMALL ADJUSTABLE GLAND NUT

WRENCH 3/4” DriveGland Nuts 2” TO 6”

$46.25

CHECK WITH US

FOR OTHER PARTS

10 TON HYDRAULIC GEAR PULLER BEARING

SEPARATOR

4” 6” 8” Pullers2 Jaw/3 Jaw

Centre Adapter EXTENSION ROD 1”X2” EXTENSION ROD 1”X4”

2 pc MAIN ROD 8”X1.75P 2 pc MAIN ROD 8”X1.75P

BEARING SEPARATOR 3” - 4-1/4” BEAM

HIGH IMPACT CASE INCLUDED


Mini Puller-Small EnginePO102

3 Jaw 1 Ton2-1/4” Reach

1/4” to 3-1/4” Spread

5/16-24 x 5 1/2 Bolt

$101.60


3 Jaw 1 Ton3” Reach

1/4” to 4-1/2” Spread

3/8- 24 x 7 Bolt

$111.83Mini Puller-Small Engine

PO2022 Jaw 1 Ton2-1/4” Reach

1/4” to 3-1/4” Spread$75.60


1 Jaw 2 Ton3” Reach

1/4” to 4-1/2” Spread$85.85

PO1044” Puller

3 Jaw5 Ton

4” Reach1/2” to 5” Spread

9/16-16 x 9 11/16 Bolt

$172.47

PO1066” Puller

3 Jaw10 Ton

6” Reach

1/2” to 7” Spread5/8-14 x 12-3/4

Bolt

$227.60

PO1088” Puller

3 Jaw17 Ton

8” Reach

3/4” to 12” Spread3/4-14 x 16 1/4

Bolt

$289.80

PO11010” Puller

3 Jaw20 Ton

9.6” Reach1” to 15” Spread3/4-14 x 19 1/4

Bolt

$318.95

PO11312” Puller

3 Jaw30 Ton

12” Reach2-1/2” to 18”

Spread1 1/8-14 x 26 Bolt

$702.45

PO2044” Puller

2 Jaw2 Ton

4” Reach1/2” to 5” Spread0.539-16 x 10-1/5

Bolt

$147.27

PO2066” Puller

2 Jaw6 Ton

6” Reach1/2” to 7” Spread2/3-14 x 12 7/8

Bolt

$193.73

PO2088” Puller

2 Jaw12 Ton

8” Reach

3/4” to 12” Spread0.766-14 x 16 3/5

Bolt

$232.32

PO21010” Puller

2 Jaw14 Ton

9.6” Reach 1” to 15”

Spread3/4-14 x 19 1/4

Bolt

$260.67

PO21312” Puller

2 Jaw25 Ton

12” Reach 2-1/2” to

18’ Spread

$559.92

The Monster PullerPO216

14” Puller2 Jaw

35 Ton - Wgt 57 lbs

14” Reach 3” to 25” Spread

The Monster PullerPO11614” Puller

3 Jaw40 Ton - Wgt 68 lbs

14” Reach 3” to 25” Spread

1.231-14 x 32 Bolt

$885.15

6 TON TO 20 TON CAPACITY- PO106 3 Jaw 6” 10 Ton- PO206 2 Jaw 6” 6 ton- PO110 3 Jaw 10” 20 Ton- PO 210 2 Jaw 10” 14 Ton- 2- 6” Tip protectors- 2- 10” Tip Protectors- 1 Board and Accessories

$693.00

Cage to guide jaws for fast set up, solid contact and superior safety

Center bolt threads de-signed for less effort to apply high torque

Slim tapered jaws allow for easier gripping and better access to tighter spots

Leverage up front for vise like power and no slippage

T-handle locks jaw open-ing precisely where you set it

Nut recessed to avoid mush-rooming and disfiguration from impact HARDENED TIP

POPHS-108 HYDRAULIC PULLER12 Tons of Pulling Force• Self-Contained Hydraulic Pump and Cylinder• Easy hand-pumping hydraulic action• Swiveling adjustable length handle• T-Handle clamps jaws securely• Forged and heat-treated jaws for superior strength• Patented Safety Cage prevents jaws from slipping off work surface• 3.3 in. Ram stroke•

Set includes: Self-contained pump/cylinder with handle, Puller assembly with standard length jaws, Pusher with centering Tip, 1.9” pusher, 2.9” pusher x 2

$1222.88

POSILOCK GEAR & BEARING PULLERS

POPM4L$950.52

Save- $100.07

6 TON TO 20 TON CAPACITY- PO104 3 Jaw 4” 2 Ton- PO106 3 Jaw 6” 10 Ton- PO204 2 Jaw 4” 2 Ton- PO206 2 Jaw 6” 6 Ton- PO110 3 Jaw 10” 20 Ton- PO 210 2 Jaw 10” 14 Ton- Tip Protectors 2 ea. 4”, 6”, and 10”- 2 Boards and Accessories

POPM6$1254.50

Save- $136.07

ATE40014$206.91

FILTER WRENCHES AND CLEANERS

L532504-1/8 TO 4-1/2” Filter

Wrench

$9.92

L535003-1/2” to 3-7/8”

Filter Wrench

$8.84

L537002-7/8” to 3-1/4”

Filter Wrench

$8.84

L507502-1/4” to 4”

Filter Wrench Plier

$32.54

L509503-5/8” to 6”

Truck and TractorCase,Cat,John Deere,etc

Filter Wrench Plier$45.68

L534003” Tight Spot

Use 3/8” Ratchet Filter Wrench

$7.94

L635006” Tight Spot Filter

StrapUse 1/2” Ratchet or

3/4” Wrench$9.01

L532004-3/4” to 5-3/16”

For John Deere, IH/CaseFilter Wrench

$12.64

4-5/16” to 4-3/4”For Diesel Truck Detroit/

CumminsFilter Wrench

$12.64

L543005-1/4” to 5-3/4”

Caterpillar EnginesFilter Wrench

$13.10

L28500Strap Wrench1” to 6-5/8”

1350 psi tensile$22.59

L54200

Swivel Gripper - No Slip Filter Wrench - Large 4.125” to

$14.91


Thoroughly cleans from the inside out Focused high-pressure output 5x the volume Long reach 90 degree multi-port air flow Access hard-to-reach areas Industries: Agriculture, construction, automotive, industrialGreat for all air filters Use one radiators and condensers Extend filter life

IPA8050IPA8051IPA8052IPA8053

12” Long2’ Long3’ Long4’ Long

AIR COMB FILTER/RADIATOR CLEANER

$29.25$33.95$43.65$48.50

Radiator Blow Out/Wash Out Kit, Air & Water Wands

RG1002$32.95

FeaturesExtends the life of your machines by keeping them clean and cool. A patented, trademarked product. 2 years field tested under extreme working conditions. Air wand for blowing out debris. Water wand for washing out debris. Infinite adjustable pressure. Specially designed fan head to increase working width. Special sized tube for access to close, confined areas. Special sized opening to increase pressure. A tested length that works best, even on 4 wheel drives. Special sized bend on fan head to go in through cowl and between fan blades

and blow directly through radiator fins. Air adapter is standard milton industrial size sold everywhere. Rust Proof Overall Wand Length 22.5" Nozzle Length 17"

DIAMOND GRIP TERMINAL CLEANERS

FOR ELECTRICAL CONNECTORS

• The 3-Piece Diamond Grip Terminal Cleaners set feature highly-durable and abrasive coat-ings for cleaning small spade pin electrical connectors. • The Diamond Grip Terminal Cleaners reduce diagnostic guesswork and increase overall harness life. • For flat and spade style terminals • Works on both male and female connectors • Highly-durable abrasive coating • Includes: • 3-Piece set for most common automotive, commercial and AG connectors • Leather styled pouch with magnetic clasp, small, medium and large cleaners

NEWIPA8040

SALE$33.95

DIESEL AIR FILTER CLEANERClean Savings Starts Here!Save money and extend filter life.

The Diesel Air Filter Cleaner is designed to help you save fuel, thus saving you money. The patented design of the Diesel Air Filter Cleaner makes cleaning your diesel filters easier and

saves you money by increasing your fuel flow. Package Includes:

- Entire Unit (Including Multiple Size Lid) - 3″ & 6″ Rotary Nozzle

- 30″ Shaft - Quick Connect For Your Air Compressor and Valve

The "Diesel Air Filter Cleaner" can save 3-5 gallons of fuel an hour for any large diesel vehicle. Now when you think of it, when you have multiple vehicles out in a field for 15 hours a day, that's a whole lot of savings! up to 225 gallons a day, if your running 3 combines for

15 hour harvest days, with diesel fuel reaching roughly around $3.75 a gallon that's $843.75 savings a day! And if you have a semi, or even multiple semis out 8 hours a day every day the

savings will sky rocket! So if you really wanna get the most out of your yearly income this product is a MUST!!!

DAFC$329.95

L80380$35.48

5 Pc Lisle Hose Remover Set

Longest is 13”Long and Short

Standard and Offset

L302001/2” Sq

Drive Impact Driver

w/200 ft lbs torque w/5 pc bit

set $33.07

LISLE SPECIALTY TOOLS

L921322” Wheel for contour plas-

tic creeper Pop In $4.83

L96422Old Style Wheel for flat plastic creeper Bolt On

$5.31

Nylon roller with bracket

Wheel size 2-3/4”bracket

1-9/16” x 2-1/4”

SX85032-1/2” Replacement Caster

AssemblyContains 2-1/2” caster2 inserts 2 lock washers

$7.40

SX85022” Replacement Caster AssemblyContains 2” caster2 inserts 2 lock washers

$6.48

L19200One Man Brake Bleederw/3 adapters to fit com-

mon bleeder screws$10.19

L29500Checks low voltage and spark

plug wires.AC/DC to 28 volts

High side checks spark plugs

$10.82

L32250Flexible Flashlight

High intensity bulb fits into tight spots

$18.07


2” Replacement wheel for low profile steel

creepers 2” diameter 2-1/2” overall

L96132$5.31 L99802

$4.83

L20610INLINE SPARK TESTERVisual Check of Ignition

System$13.54

L965724” Wheel for NEW con-

tour plastic creeper$10.66 $25.31 $23.50

L44500L44480

L70500

$33.87

Ideal for use when a

T-handle won’t fit

-Fits 2-1/4”.-Relieves spring pressure.-Tighten knurled knob by hand.

-Fits 1-1/2”.-Relieves spring pressure.-Tighten knurled knob by hand.

HO

SE C

LAM

P VI

SE

HO

SE C

LAM

P VI

SE

TAP SOCKET SET

L292003/8” Sq Drive Impact Driver w/200 ft lbs

torque w/5 pc bit set $33.07

L31800Lisle Scribe

Ideal for Marking Most Metal and Softer Material

Surfaces.$4.96

L56150

Combination Flaring ToolNot for Stanless SteelWorks for Single and Double Flares, Also ISO (Bubble) Flares

$113.83

L81000LISLE TORX PLUS SOCKETS

1/4” & 3/8” DriveTP10 - TP50

$32.26

SK197044 Pc 3/8” & 1/2”

Triple Square Bit Socket Set (On Rail)

$62.45

S-K INDIVIDUAL TRIPLE SQUARE SOCKETS

COST16.7816.78

SIZE6MM8MM”

PART #SK45436SK45438

COST21.0321.03

SIZE10MM12MM

PART #SK41420SK41422

3/8” DRIVE

1/2” DRIVE

LISLE TORX PLUSINDIVIDUAL SOCKETS

COST4.504.504.504.504.504.506.756.756.75

SIZETP10TP15TP20TP25TP27TP30TP40TP45TP50

PART #L81010L81020L81030L81040L81050L81060L81070L81080L81090

SK84232SK TORX PLUS SOCKETS1/4” , 3/8”, & 1/2” Drive

11 Pc. T10 TO T60

$140.22

S-K TORX PLUSINDIVIDUAL SOCKETS

COST12.8012.8012.8012.8012.8012.8012.80

16.3016.3018.1318.13

24.49

SIZET8T10T15T20T25T27T30

T40T45T50T55

T60

PART #SK42938SK42940SK42941SK42942SK42943SK42944SK42945

SK45570SK45571SK45572SK45573

SK45574

1/4” DRIVE

3/8” DRIVE

1/2” DRIVE

SK84229SK TORX PLUS SOCKETS

1/4” & 3/8” Drive9 Pc T10 TO T50

$104.03

Torx Plus Bits will not fit on Standard Torx

Fasteners

LISLE IMPACT DRIVERPARTS

COST4.962.052.054.752.522.022.24

SIZE3/8 HOLDER#3 PHILLIPS#1 PHILLIPS1/2 HOLDER3/8 BLADE#2 PHILLIPS#4 PHILLIPS

PART #L29520L29550L29630L30150L30170L30180L30190

L709403 Larger 1/2” Drive Tap

Sockets5/8” - 3/4” (16-18mm)

$26.20

L60850LISLE 9 PC MASTER TRIPLE

SQUARE BIT SET4MM - 16MM

$38.71

LISLE TRIPLE SQUARE INDIVIDUAL BITS

COST4.504.505.405.405.405.665.666.317.22

SIZE4MM5MM6MM8MM10MM12MM14MM16MM 18MM

PART #L60710L60720L60760L60770L60780L60790L60860L60870L60880

FITS BOTH LISLE 30200 AND 29200

Lisle Individual 33850 Hex bits

Lisle Individual 26550 Torx Bits

S-K INDIVIDUAL HEX SOCKETS

S-K INDIVIDUAL HEX SOCKETS

1/4”9/32”5/16”/8mm3/8”7/16”1/2”

6mm7mm10mm12mm14mm15mm17mm18mmplastic case

GP1598HC$123.12

18 PC 1/2” IMPACT HEX DRIVER SAE AND METRIC

GP1398H$65.72

10 PC 1/2”IMPACT HEX DRIVER SAE

9/16”5/8”/16mm11/16”3/4”

6mm7mm8mm/5/16”10mm12mm14mm15mm

GP1498MH$65.72

10 PC 1/2”IMPACT HEX DRIVER MM

17mm18mm19mm

1/4”9/32”5/16”/8mm3/8”7/16”1/2”9/16”5/8”/16mm11/16”3/4”

T30T40T45T47T50T55T60T70

GP1300T$73.68

8 PC 1/2”IMPACT INTER-

NAL TORX

T20 T25 T27T30T40T45T47T50T55

GP1200T$60.29

9 PC 3/8”IMPACT INTER-

NAL TORX

SAVE$9.15


PriceSizeL26560L26570L26580L26590L26600L26610L26620L26630L26500L26640L26650L26520

Bit

L136007 Pc. 3/8” Drive

Hex Bit Set1/8” to 3/8”

$19.75

L338507 Pc. 3/8” Drive

Metric Hex Bit Set3mm to 10mm

$19.34

L265509 Pc. 1/4-3/8”

Torx Bit Socket Set T-10 to T50

$24.85

L2720012 Pc. 1/4”-3/8”


$31.05

L376009 Pc. 1/4”-3/8”

Torx PLUS Bit Socket SetT-10 to T50

$29.43

L260007 Pc. 1/4” Tamper Resistant


$16.12

L267507 Pc. 1/4”-3/8”

Torx Socket Set for External Torx BoltsE6 to E16$19.34

L26280MASTER TORX SOCKET

SET E-5 to E-20For external Torx Bolts

$30.64

L2645034 PC. MASTER TORX SETTorx Bits, Tamper Resistant

Torx, and Torx Sockets in stor-age box$85.52

T10T15T20T25T27T30T40T45T47T50T55T60

$3.22 $3.22 $3.22 $3.22 $3.22 $3.22 $4.31 $4.31 $4.31 $4.31 $4.31 $6.75

L33860L33870L33880L33890L33900L33910L33920

Bit3mm4mm5mm6mm7mm8mm

10mm

Size $3.27 $3.27 $3.27 $3.27 $3.40 $3.40 $3.59

Price

800-821-2932Buzzard

Gulch Inc.

3/8 DRIVE BALL END HEX BIT SOCKET SET

Sizes: 5/32”, 7/32”, 1/4”, 5/16”, and 3/8”

on a Rail

SK19766 $65.99

SK19756 $65.99

3/8 DRIVE BALL END HEX BIT SOCKET SET

Sizes: 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm

on a Rail

9 Pc. 3/8” & 1/2” Drive Hex Bit Socket Set

3/8 = 5/32” - 3/8”1/2” = 1/2” - 5/8”

9 Pc. 3/8” & 1/2” Drive Hex Bit Socket Set

3/8 = 4mm - 10 mm1/2” = 12mm - 17mm

11 Pc. Pipe Plug Socket Set

3/8” Drive Male Sockets 3/16” to

3/8”Female Sockets

1/4” to 3/8”

COST11.6911.6911.6911.6914.0414.0422.2722.2723.38

SIZE5/32”3/16”7/32”1/4”5/16”3/8”1/2”9/16”5/8”

PART #412074120841209412104121141212412164121841220

COST11.6911.6911.6915.1915.1915.1922.2624.4924.49

SIZE4mm5mm6mm7mm8mm10mm12mm14mm17mm

PART #414034140441405414064140741409414124141441417

SK19733$99.14

SK19734$112.08

SK19781$112.17

TI161306 Pc 1/2” Dr. SAE Hex Bit

Socket Set9/16”, 5/8”, 11/16”, 3/4”,

13/16”, 7/8”

$37.13

TI161316 Pc 1/2” Dr. Metric Hex

Bit Socket Set13mm, 14mm, 15mm, 17mm,

19mm, 21mm, 22mm

$38.78

TI161328 Pc 1/2” Dr. SAE/Metric

Hex Bit Socket Set9/16”, 5/8”, 11/16”, 3/4”,

14mm, 15mm, 17mm, 19mm

$42.50

Lisle Individual 37600 Torx Bits

PriceSizeL37610L37620L37630L37640L37650L37660L37670L37680L37690L37700L37710L37720

BitT10T15T20T25T27T30T40T45T47T50T55T60

$3.87 $3.87 $3.87 $3.87 $3.87 $3.87 $5.53 $5.53 $5.53 $5.53 $7.66 $10.19

PriceL13610L13620L13630L13640L13650L13660L13670

Bit1/8”

5/32”3/16”7/32”1/4”

5/16”3/8”

$3.27$3.27$3.27$3.27$3.59$3.59$3.87

SizeLisle Individual 13600 Hex Bits

BUZZARD GULCH INC800-821-2932

FAX 660-439-2720E-mail [email protected].

com

6 Pc. 3mm to 10mm7 Pc. 1.5mm to 6mm7 Pc. 2mm to 8mm8 pc. 2mm to 8mm

BALL END5 Pc. 4mm to 10mm6 Pc. 2mm to 6mm

Buzzard Gulch, Inc 800-821-2932 Catalog T Page 55

EK20811EK20812EK20911EK20912EK20511

8 Pc. .050 to 5/32”3/32 to 1/4” Longer9 Pc. 5/64” to 1/4” 60 oz9 Pc. .050 to 3/16”5 Pc. 3/16” to 3/8”

$4.03$8.15$6.23$4.91$8.78

saesae

EK21171EK21172EK21151

7 Pc. 1.5 to 6mm7 Pc. 2 to 8mm6 Pc. 3 to 10mm

$5.08$6.71$9.33

metric metric

EK22572EK22571

7 Pc. T6 to T207 Pc. T10 to T40

$12.10$12.10

torx torx

EK50160EK50190EK56168EK56198

EK60914EK60814

10 Pc. 3/32” TO 3/8” 6” LONG SAME BUT 9” LONG8 Pc. 2MM TO 10MM 6” LONGSAME BUT 9” LONG

13 PC. 5/64” TO 3/8” 9” LONGSAME BUT BALL END

$44.02$48.02$40.57$43.72

$59.46$68.26

EK15500EK15501EK15502EK15503EK15504EK15505EK15506EK15507EK15508EK15509EK15510EK15511EK15512EK15514EK15516EK15518EK15520EK15522EK15524EK15528EK15534EK15538EK15544EK15548

.7

.91.31.522.533.544.555.567891011121417192224

$0.28$0.30$0.16$0.24$0.28$0.32$0.40$0.46$0.46$0.58$0.58$0.84$0.84$1.12$1.38$1.86$2.28$4.08$4.08$5.84$7.76$12.94 $17.62$25.38

EK18602EK18603EK18604EK18605EK18606EK18607EK18608EK18609EK18610EK18611EK18612EK18614EK18616EK18618EK18620EK18622EK18624EK18628EK18634EK18638EK18644EK18648

$1.14$1.14$1.14$1.18$1.26$1.54$1.54$1.82$1.82$2.32$2.32$4.66$4.08$7.74$6.04$15.32$15.32$21.88$29.44$42.40$76.46$96.88

BALL END

EK1321313 Pc. Long SAE .050” to

3/8” Ball End L Key Set $19.49

10 Pc. Long Metric

1.3mm to 10mm in

Metal Index Ball End L Key Set

ERGONOMIC SLIP-RESISTANT GRIP HANDLE

STAND CAN BE

AT-TACHED

TO WALL , BENCH

OR EACH

OTHER

EK25911EK25912EK25611

EK25519 EK25919

9 Pc. 5/64” to 1/4”9 Pc. .050 to 3/16”6 Pc. 5/32” to 3/8”

Ball End5 Pc. 3/16” to 3/8”9 Pc. 5/64” to 1/4”

$ 7.69$ 6.61$ 10.97

$ 14.33$ 12.08sae

MetricEK25161EK25171EK25172EK25181

EK25159EK25169

$ 10.97$ 6.61$ 8.80$ 9.91

$14.33$ 9.91

PART # SIZE COST

PART # SIZE COST

EK136099 Pc.

Long Metric 1.5mm to

10mm Ball End L Key Set$16.20

EK13610$34.96EK10609

9 Pc. Long Metric

1.5mm to 10mm

L Key Set$10.23

EK1021313 Pc. Long SAE .050” to

3/8” L Key Set

$10.66

12 Pc. Hex Key set In Clip Heat Treated

050 - 5/16”

9 Pc Metric Hex Key In Clip Heat Treated 1.5mm to 10mm

L4250012 Pc. Long Hex Key Set In Clip Heat

Treated050 - 5/16”

$8.04

L426509Pc. Long Hex

Key Set In Clip Heat

Treated1.5mm to

10mm$8.70

L42150$7.07

L42300$7.93

LOOP HANDLE FOR EXTRA STRENGTH

T-HANDLE SETS6” AND 9”


.028

.035

.0501/165/643/327/641/89/645/323/167/321/45/163/87/161/29/165/83/47/81

$0.28$0.30$0.16$0.18$0.20$0.22$0.22$0.22$0.24$0.26$0.32$0.50$0.58$0.94$1.46$3.08$3.76$5.42$7.22$11.18$16.72$25.38

LONG


.028

.035

.0501/165/643/327/641/89/645/323/167/321/45/163/87/161/29/165/83/47/81

$0.54$0.48$0.20$0.22$0.24$0.26$0.32$0.40$0.40$0.44$0.48$0.76$1.00$1.60$2.42$4.70$5.40$7.26$11.74$16.68$25.16$33.66

EK18203EK18204EK18205EK18206EK18207EK18208EK18209EK18210EK18212EK18214EK18216EK18220EK18224EK18228EK18232EK18236EK18240EK18248EK18256EK18264

.0501/165/643/327/641/89/645/323/167/321/45/163/87/161/29/165/83/47/81

$1.14$1.14$1.14$1.14$1.26$1.26$1.30$1.48$1.72$1.94$2.24$3.74$5.56$12.70$15.88$21.98$28.80$41.62$72.62$96.88

BALL ENDregularPART # SIZE COST PART # SIZE COST

PART # SIZE COST

SAE HEX KEYS METRIC HEX KEYSregular

PART # SIZE COSTLONG

EK15600EK15601EK15602EK15603EK15604EK15605EK15606EK15607EK15608EK15609EK15610EK15611EK15612EK15614EK15616EK15618EK15620EK15622EK15624EK15628EK15634EK15638EK15644EK15648

.7

.91.31.522.533.544.555.567891011121417192224

$0.54$0.42$0.42$0.42$0.42$0.50$0.54$0.58$0.58$0.76$0.76$1.18$1.18$1.40$1.86$2.30$3.04$5.62$5.62$7.72$12.58$17.58$26.40$33.66

1.31.522.533.544.555.567891011121417192224

LEGENDARY BESSEY SLIDING CLAMPJM2400J-12

5.5” Throat 12” Arm2660 Pressure

$144.94

3- 3/8X 3-3/83-3/8 X 3-3/86-1/8 X 3-3/83-3/4 X 4-3/83-3/4 X 4-3/88 X 8

Catalog-Length Pressure Throat Price

Catalog-Length Pressure Throat PriceJM1800-S8JM1800-S12

JM2400S-8JM2400S-12JM2400S-16JM2400S-20JM2400S-24JM2400S-36JM2400S-48 JM2400S-60

JM4800S-12JM4800S-18JM4800S-24 JM4800S-36JM4800S-48JM4800S-60

18001800

266026602660266026602660 26602660

4880488048804880 48804880

4.75”4.75”

5.5”5.5”5.5”5.5”5.5”5.5” 5.5”5.5”

7”7”7”7”7”7”

114.96121.20

121.57137.06152.84172.41193.67243.66281.14318.63

243.66 272.40 298.63 329.88 358.62 406.10

heavier sizes available

JMSQ-4JMSQ-8JMSQ-12 JMSQ-16JMSQ-20 JMSQ-24

JMSTB12JMSTB18JMSTB24JMSTB36

133026602660266026602660

4880488048804880

4.75”5.5”5.5”5.5”5.5”5.5”

7”7” 7”7”

38.73 69.96 96.84 108.70 121.20 148.69 184.93 213.04 228.04 244.90

ALL STEEL INDUSTRIAL CLAMPS

JM1200-S8JM1200-S12JM1200-S18JM1200-S24

1200120012001200

5.5”5.5”5.5”5.5”

61.21 64.96 68.72 72.46

LIGHT TO MEDIUM SLIDING CLAMP

One Hand operationHolds, fixes and aligns at 90

de angleholds pipe and sq tubingbrass screw

JMWSM-9Jaw Height 1.5”Jaw Length 4”

3-1/2” Miter Joints

$228.07JMWSM-12

Jaw Height 2.5”Jaw Length 4.5”

4-3/4” Miter Joints

$349.87

MULTI PURPOSE MAGNETIC SQUARES

JMWMS-1JMWMS-3JMWMS-4JMWMS-5JMCMS-1JMBDMS-1

66 55 110 112 100 100

18.19 9.70 19.41 23.06 47.32 109.07

CAT NO. WIDE X HGT THICK # PULL

3/4”5/8”5/8”3/4”1-1/2”1-5/8”

WELDER’S MAGNETIC GROUND CLAMP

JMMGC-1JMMGC-2

5555

$30.87$37.40

CAT NO. AMP HEIGHT # PULL PRICE

250800

2”2-1/2”



STEP OVER CLAMPS

JM4800J-205.5” Throat 20” Arm

4880 Pressure$293.63

Welders Angle

Clamps

4800SSERIES

SQ4SERIES STB12

SERIES1200SSERIES

1800SSERIES

2400SSERIES

JMLC4JMLC8JMLC12JMLC20JM1800L-12

400 660 1200 1200 1800

2-3/8”4” 5-1/2”4-3/4”5-1/2”

61.21 71.22 97.46 107.44 202.73


LEVER CLAMPS

Large tilting pressure plate Patented rail profile offers more clamp force. Trigger pro-tection means fewer pinched fingers Secure ratchet mechansim. New u-shaped sliding arm offers straight line power transmission. Great stability.

JMJ18-84.75” Throat

8” Arm$107.44

JSERIES

MAGNETIC TOOL HOLDERSPull of over 20 lbs per inch

BGTF343/4” x 520” Teflon tape

$7.50 (10 pk)

3/4” x 60’ PVC Black Electrical

Tape


MX00162MX00163MX00164MX00165MX00166MX00167MX00168

25.00 28.00 34.10 46.60 65.80 80.60 117.30

PART LENGTH HARD SOFT COSTBGBC-18 1/4” 18”BGBC-24T 5/16” 24”BGBC-30T 3/8” 30”BGBC-36T 7/16” 36”

PART NUMBER BOLT SIZE LENGTH COST17.85 26.75 33.90 35.82

MAXPOWER BOLT CUTTERS HIGH TENSILE STANDARD DUTY BOLT CUTTERS

1/8”3/16”1/4”5/16”3/8”7/16”1/2”

1/4”5/16”3/8”7/16”1/2”9/16”5/8”

12”14”18”24”30”36”42”

Harened Alloy Steel-Jaws 60 HRc

Exceeds Gov-ernment Specs GGG-C-740D

Rubber Grip

Handles

BG33-CL60$7.25 (pk 10)

BGTF12

1/2” X 260” Teflon tape

$6.48 (10 pk)

2” X 60 YDCloth Backed HD Duct Tape

BGDT

$5.95

CDF402CDF403CDF404CDF406CDF408CDF410CDF412

2” X 2”3” X 2-3/8”4” X 2-3/4”6” X 3-5/8”8” X 4-1/2”10” X 5-3/8”12” X 5-3/4”

3300350041005400590062009500

20.6526.1230.3638.8850.4368.0482.62

C-CLAMPSBG2223BG2230BG2240BG2260BG2280

220012200222003220042200522006220072200822009

540A-2.5540A-3 540A-4 540A-5 540A-6 540A-8 540A-10 540A-12 540A-14

1-3/4”1-7/8”2-1/16”2-1/2”2-3/4”3-1/4”3-5/8”3-5/8”3-3/4”

1/2”1/2”5/8”5/8”5/8”3/4”7/8”7/8”7/8”

1,1101,8002,1502,2502,4502,7502,8502,8502,850

$12.49$14.34$19.89$23.59$30.53$39.78$47.18$59.20$75.85

STOCK# CAT # OPENING THROAT SPINDLE TEST LBS PRICE0-2.5”0-3”0-4”0-5”0-6”0-8”0-10”0-12”0-14”

WILTON CARRIAGE C-CLAMPSMade from High Strength ductile • Iron Castings.Sliding Pin Handle, Acme Thread-• ed Rolled Spindle with Oscillating Ball and Socket Tip.Lifetime Warranty•

CAT # OPENING x THROAT TEST LBS PRICE

2”3”4”6”8”

$3.98$5.09$5.86$9.1413.14

DROP FORGED C-CLAMPS

CAT # SIZE PRICE

CASTC-CLAMPS

BGPANIC7/8” X 4-1/2” Panic Snap w/

Swivel Ring

$4.95BG3142/

H6026-19197/8” Round Eye

4” LongBull Snap with

Swivel Ring

$3.09 eaBG5025/

H6026-18171/2” X 2-3/4” Bolt Snap w/ Swivel Ring

$0.75 eaBG6026/

H6026-24183/4” X 3-1/4” Spring Snap

w/ Swivel Ring

$1.39 ea

CLOSEOUT ON

H.D. SNAPSV225101V225102V225103V225104V225105V225106V225108V225123V225134

2.012.885.92

10.1612.8215.4022.129.20

13.68

1”2”3”4”5”6”8”2”3”

1-3/16”1-5/16”2-1/4”3”3-1/4”3-1/2”4”3-1/2”4-1/2”

IRWIN C-CLAMPS

QUICK RELEASE PICKUP MAGNETS (The good ones are back)

Picks Up 14 lbs of 1/2” steelEZ-1EZ-2EZ-X1EZ-X2

8” OVERALL 14 lb28” OVERALL 148” OVERALL 28 lb28” OVERALL 28

$ 23.93$ 29.51$ 40.66$ 46.11

MM7561 24” Black $17.28MM7562 24” Chrome $18.87

BGPARTS6” ROUND MAGNETIC

PARTS TRAY

$4.95

50 Lb. Pickup 36” Long3” round magnetic head

BGPA696” X 9” Rectangle

Magnetic Parts Tray$7.95

10” X 10” Rectangle Magnetic Parts Tray

BGMMPU$13.95

BGPA1010$13.75

BGPA6146” X 14” Rectangle Mag-

netic Parts Tray$12.95

BGPAMINIS2” X 4” Rectangle Magnetic

Parts Tray$2.95

BGPAMINIR4” ROUND MINI

MAGNETIC PARTS TRAY

$2.95


L126007 Pc. Bearing Race &

Seal Driver Set1.565” to 2.555”

$33.87

L1298010 Pc. Bearing Race & Seal Driver Set in Case

1.565” to 3.180”$70.98

L2480017 Pc. Bearing Race & Seal Driver

Set with Special Adapter for Shielded seals up to 3-3/8” poly

$40.33

L56750Seal Puller

For Oil and Grease Seals2 Size tips

$9.92

L65250Universal Bearing

PackerCone Diameter is

4-1/2”

$9.75

L34550Handy Packer - Bearing

PackerWorks on bearings up to

3-1/2” OD$24.86

L14160Removes rust, scale, paint,

and solder from metal surfaces. 5-1/2” of densely

packed wire bristles w/ wood handle. Overall length 14”

$6.57

L14180Removes rust, scale, paint,

and solder from metal surfaces. 4-1/2” of densely

packed wire bristles with wood handle. Length 9-1/2”

$6.57

L32050Telescoping Mirrors

2-1/4” Diameter Mirror that extends

from 10” to 14”

$9.92

L31250Pickup Magnet

Total Length 9-1/2”$7.66

L66500Telescoping Mag-net from 4-1/2”

to 16-1/4”

$6.31

SG27000Lifetime Heavy Duty

Circuit TesterBest for 6 & 12 V Sys-

tems5’ of tough, flexible rub-

ber wire$8.84

L28400 Heavy Duty Circuit TesterTest Low

Voltage up to 28 Volts. Comes with a strain relief spring on cord

$12.91

L25600 Handy Hooker Circuit TesterHooded Probe protects your fingers and automatically centers the wire up to 28

Volts

$14.00

Master Pneumatic Bearing Race & Seal Driver Set Same as L12980 but add 2 handles

109.58

- Easily removes most oil and grease seals.- Adjust the head to 5 different positions.

16.26

$53.23

Complete set of

disconnect-ing tools for A/C & Fuel

lines.

L12800

L39900

L56650

L55000Extra Pair of Hands

When Soldering. Clip and Base Are

Magnetic

$16.72

Lighted Mag-netic Pickup

Telescopes from 7-3/4 to 32-3/4 . Textured handle provides sure grip.

L30120

Master Plus Disconnect Set

Disconnect tools for A/C, Fuel, transmission, Air Lines, and Oil Cooler

L39800

$124.76

$16.26

T & E Deluxe Bushing/Bearing/Seal Drivers51-Pc. Set in Plastic Case

3/4” - 2-15/16”

TE9013 $429.95

T & E JUMBO Bushing/Bearing/Seal Driver 19-Pc. Set In Plastic Case

2-3/4” - 6”

TE9012 $397.50

L31000Pickup Magnet

Telescopes from

14-1/2”- 23-1/4”$13.36

L28440REPLACEMENT BULB

& SPRING

$1.91

MAY3734510 PC SCREW EXTRACTOR SET

*Hardened Steel with fluted edges makes for easy removal of damaged screws *Heavy Duty case with space available to store your drill bits along with the extractors

MAY600284 PC O-RING - SEAL REMOVER SETROUNDED TIPS FOR EASY DAMAGE FREE REMOVAL• SOLVENT RESISTANT HANDLES• 2 TIP AND 2 BLADE LENGTHS FOR MOST APPLICATIONS•

$18.30

MAY600262 Pc Dominator HD Scraper Set

• 2” Blade x 14.5” Long -- 1/2” Steel• 3” Blade x 17” Long -- 5/8” Steel•

$67.58

MAY600274 Pc Dominator Extra Long Hook & Set

20-1/2” Overall Length• Includes: C-Hook, Complex Hook, 90 Degree Hook and • Cotter Pin Puller

MAY29895STUD EXTRACTORFits 3/8” Impact Wrench

Will Remove: Threaded, stripped,rusted, broken and smooth studsFits studs from 1/4” to 1/2”

(6mm to 12mm)Can be used to insert StudsFully Warranted

$71.762 yr. warranty

L60260SEIZED FASTENER

REMOVER

Low Profile, Heat Treated Sockets center the pneumatic driver on the frozen bolt. The Hex Shaped Socket float on the driver allowing a turning wrench to be used while impacting the bolt head. Sizes 5-16” to 9/16” including 6mm to 12mm$49.73

L61900Fits Class 8 and Over Road

Trucks, Trailers and Some Medium Duty Trucks

From 3-43/64” to 6” (6 Drivers)2 Pc. Handle Included

3696136962369633696436965

D1/8”, S1/4”-5/16D3/16”, S3/8”D15/64 , S7/16”D5/16”, $1/2 - 9/16”D3/8”, S5/8”

3696636967369683696939529

D15/32”, S3/4”D9/16”, S 7/8”D21/32”, S1-1/8”D13/16”, S1-3/8”1-1/16”

INCLUDES$3.92$4.14$4.36$4.36$4.46

$6.90$7.60$9.2211.2917.75

$93.56

$79.21

$201.73

48-22-35226” Torque Lock Lock-

ing C-Clamp Swivel Jaws

$17.58


ing C-Clamp Swivel Jaws

$27.75


ing C-Clamp Regular Jaws

$26.36


ing C-Clamp Regular Jaws

$16.19

48-22-34099” Torque Lock

Long Nose Locking Pliers

$21.28

48-22-34066”Torque Lock

Long Nose Locking Pliers

$18.50

V20R/27ZR18” Locking Chain Clamp

$32.58V40EXT $16.45V40REP $16.45


TI1090625’ TITAN TAPE MEASURE

Tough Impact• Resistant Plastic •Case Comfortable Rubber •Sleeve for better grip•Quick Read Tape Markings•

$16.58set

TI109024 Pc Tape Measure Set

12’-16’- 25’-33’High Impact Plastic Cases

BGX100610’ Tape Measure

$2.66

$5.40

KD206METAL HOUSING

BATTERY TERMINAL CLEANER$10.45

KD21733 WAY BATTERY TOOLSHARP STEEL BLADES

$10.05

KD2228 METRIC .075 TO 3MMKD2229 11 TO 24 PitchKD2249 9-32 PITCH

RESTORE EXTERNAL THREADS BY FILING. FILES BOTH RIGHT

AND LEFT HAND THREADSCHOICE $12.93 EA

BLUE POLYETHYLENE TARPS AND TARP STRAPS

BGTA68 6 X 8BGTA810 8 X 10BGTA1012 10X12BGTA1020 10X20BGTA1216 12X16BGTA1620 16X20BGTA1824 18X24BGTA3030 30X30BGTA2040 20X40BGTA3040 30X40

2.26 3.77 5.66 10.49 10.10 15.10 20.39 42.46 37.74 56.51WATERPROOF-TEAR RESISTANT-LIGHT-

WEIGHT

PART SIZE COST

CG8095110” General Purpose

$13.89

Nicholson HACKSAW FRAMES CG80956

12” High Tension

$27.84

12” NicholsonBi Metal Alloy Blades

CG62723 12” x 18 teethCG62749 12” x 24 teethCG62776 12” x 32 teeth

CHOICE OF TEETH$ 17.95 Pack of 10

10” NicholsonBi Metal Alloy Blades

CG62635 10” x 18 teethCG62659 10” x 24 teeth

CHOICE OF TEETH$ 16.82 Pack of 10

MISSOURI MADE HAMMER HANDLES

HH183636” WOODEN

SLEDGE HAMMER HANDLE (10-16 lb)

$9.75

HH153636” WOODENDOUBLE BIT AXE HANDLE

$11.38

HH163636” WOODENSINGLE BIT

AXE HANDLE

$11.38

HH21616” WOODEN

BALLPEIN HAMMER HANDLES (24 oz)

$3.95

HH21818” WOODEN

BALLPEIN HAMMER HANDLES (32 oz)

$3.95

HH183232” WOODEN

SLEDGE HAMMER HANDLE (8 lb)

$9.25

HH2348CFH48” BENT SHOVEL

CHUCKED HANDLE

$11.03

HH203636” RAILROAD PICK

HANDLE

$14.26

HH51414” WOODEN

SLEDGE OR CROSSPEIN HAMMER HANDLES (2 LB)

$3.95

HH51616” WOODEN

SLEDGE OR CROSSPEIN HAMMER HANDLES (3-4 LB)

$3.95 TI22400TITAN HEAT GUN

500 WATT750 WATT

Plastic Welding, shring tubing, paint stripping

3 position rocker switch

$19.95

QUESTIONS?BUZZARD

GULCH INC800-821-2932

48-22-342010” Torque

Lock Curved Jaw

Locking Pliers

$15.73

48-22-3510 10” Torque

Lock Straight Jaw Locking

Pliers$15.73

48-22-512525’

Magnetic Tape

Measure$32.38

48-22-3102(2) Inkzall

Jobsite Medium

Point Black Markers$4.63

48-22-1902Fastback II Flip Utility Knife with Storage$21.28

48-22-195350 PC

Drywall Utility Knife Blades with Dispenser

$24.98

48-22-34022PC Torque Lock Curved Jaw Locking

Pliers Set 7” & 10”$28.88

48-22-30697 1/2” 6in1 Combon-

ation Pliers$38.85

48-22-321010” Tongue & Groove Pliers

$26.83

48-22-33099” 6in1 Lineman’s

Pliers $38.85

48-22-41077” 6in1 Diagonal

Pliers$26.68

48-22-30688” 6in1 Long Nose

Pliers$32.38

48-22-31088” Quick

Adjust Ream-ing Pliers$24.05

48-22-35077” Torque

Lock Straight Jaw Locking

Pliers$14.80

3/8” Reduced Shank Sets

TIN THUNDERBIT 135 DEGREE

triumph twist drill bit sets and 1/2” shank single drill bits

T19 (90519) 13 Pc. 118 Degree PointAluminum & Wood High Speed Steel

1/16” TO 1/4” by 64th$15.84

T19M (90547) 13 Pc. 3 Flat Shank

135 Degree Split Point, Iron, Steel, Stainless Steel, &

Wood, Black & Bronze Oxide Finish

1/16” TO 1/4” by 64th$20.76

GENERAL PURPOSE

GENERAL PURPOSE

T18 (90518) 15 Pc.118 Degree Point

Aluminum & WoodHigh Speed Steel

1/16” TO 1/2” by 32nds$47.24

T18M (90551)15 Pc. 3 Flat Shank

135 Degree Split Point,Iron, Steel, Stainless Steel, & Wood Black & Bronze Oxide

Finish1/16” TO 1/2” by 32nds

$57.85

COLBALTT18C (99826) 15 Pc.

135 Degree Split Point For Steel & Stainless Steel

Bronze Oxide1/16” TO 1/2” by 32nds

$97.47

T18HD (99857) 15 Pc.135 Degree Split Point For Iron, Steel Stainless

Steel, & WoodBlack & Bronze Oxide

1/16” TO 1/2” by 32nds$63.97

GENERAL PURPOSE

T17 (90517) 29 Pc.118 Degree Point

Aluminum & WoodHigh Speed Steel

1/16” TO 1/2” by 64nds$89.46

T17M (90552) 29 Pc. 3 Flat Shank

135 Degree Split Point,Iron, Steel, Stainless Steel, & Wood

Black & Bronze Oxide Finish1/16” TO 1/2” by 64ths

$108.03

T17HD (99856) 29 Pc.135 Degree Split Point For Iron, Steel Stainless

Steel, & WoodBlack & Bronze Oxide

1/16” TO 1/2” by 64ths$114.44

COLBALT

T17C (99822) 29 Pc.135 Degree Split Point

For Steel & Stainless SteelBronze Oxide

1/16” TO 1/2” by 64ths$186.57

TIN THUNDERBIT

T17HDG (93700) 29 Pc.135 Degree Split Point

For Iron, Steel & Tough Alloys

Titanium Nitride Coat1/16” TO 1/2” by 64ths

$199.49

SIZE

1/16”5/64”3/32”7/64”1/8”9/64”5/32”11/643/16”13/647/3215/641/417/649/3219/645/1621/6411/3223/643/825/6413/3227/647/1629/6415/3231/641/2

PART #

1100411005110061100711008110091101011011110121101311014110151101611017110181101911020110211102211023110241102511026110271102811029110301103111032

COST

.80

.80

.83

.83

.911.021.441.151.331.541.671.792.042.332.853.093.153.554.034.514.515.205.315.886.207.317.367.867.71

GENERAL PURPOSE 118 DEGREE TRI-NADO 135 DEGREE

SIZE

1/16”5/64”3/32”7/64”1/8”9/64”5/32”11/643/16”13/647/3215/641/417/649/3219/645/1621/6411/3223/643/825/6413/3227/647/1629/6415/3231/641/2

PART #

3330433305333063330733308333093331033311333123331333314333153331633317333183331933320333213332233323333243332533326333273332833329333303333133332

COST

1.091.111.201.201.351.391.521.611.812.092.242.392.653.203.744.004.054.555.115.755.796.626.817.518.089.409.479.909.92

SIZE

1/16”5/64”3/32”7/64”1/8”9/64”5/32”11/643/16”13/647/3215/641/417/649/3219/645/1621/6411/3223/643/825/6413/3227/647/1629/6415/3231/641/2

PART #

1250412505125061250712508125091251012511125121251312514125151251612517125181251912520125211252212523125241252512526125271252812529125301253112532

COST

1.091.091.171.171.331.331.461.551.761.912.092.262.412.963.333.633.724.144.645.295.426.126.296.967.498.628.719.189.32

THUNDERBIT 135 DEGREE

COST

1.631.631.631.722.052.202.332.442.793.593.854.184.614.965.336.256.727.298.539.71

10.1810.6411.2912.0312.4715.0215.2415.6916.15

SIZE

1/16”5/64”3/32”7/64”1/8”9/64”5/32”11/643/16”13/647/3215/641/417/649/3219/645/1621/6411/3223/643/825/6413/3227/647/1629/6415/3231/641/2

PART #

1150411505115061150711508115091151011511115121151311514115151151611517115181151911520115211152211523115241152511526115271152811529115301153111532

COLBALT 135 DEGREE

COST

2.072.092.202.222.332.392.502.612.784.134.244.464.616.707.107.497.428.078.58

11.3411.1713.0613.1013.9714.1315.8715.8016.3716.13

SIZE

1/16”5/64”3/32”7/64”1/8”9/64”5/32”11/643/16”13/647/3215/641/417/649/3219/645/1621/6411/3223/643/825/6413/3227/647/1629/6415/3231/641/2

PART #

1280412805128061280712808128091281012811128121281312814128151281612817128181281912820128211282212823128241282512826128271282812829128301283112832

T9093829 Pc. Plastic

Drill Index GaugeFractional Sizes 1/16” to 1/2”

$1.25T90939

29 Pc. Metal Drill Index GaugeFractional Sizes 1/16” to 1/2”

$2.00

T17X (090917)29 Pc. Index Only

$9.36T18X (090918)

15 Pc. Index Only $8.03


T815 (090815)15 Pc. 1/16” to 1/2” by 32nd

$53.74T829 (090829)29 Pc. 1/16” - 1/2” by 64th$93.84T829M (090550)Same as above only flat shank

$113.78

DW196929PC Gold Pilot Point

1/16”-11/64” Split Point3/16”-1/2” Pilot PointAluminum, Wood, PVC

$90.88

1 Year Warranty for All Triumph Drill Bits

HA6014829 Pc. HSS 118 Degree Bright

Finish Drill Bit Set 3/8” Shank

1/16” to 1/2” by 64ths

DE341-50L15 Pc. Desco

Left Hand Drill Bit Set

118 Degree Point

1/16” to 1/2” by 32nds$250.02

IRWIN TURO MAX POINTGENERAL PURPOSE 118 DEGREE

SIZE1/16”5/64”3/32”7/64”1/8”

9/64”5/32”11/643/16”13/647/32

15/641/4

17/649/32

19/645/16

21/6411/3223/64

3/825/6413/3227/647/16

29/6415/3231/64

1/2

PART #310-04L 310-05L310-06L 310-07L 310-08L 310-09L 310-10L 310-11L 310-12L 310-13L 310-14L 310-15L 310-16L 310-17L 310-18L 310-19L 310-20L 310-21L 310-22L 310-23L 310-24L 310-25L 310-26L 310-27L310-28L 310-29L 310-30L310-31L 310-32L

COST5.805.926.016.396.236.577.228.569.029.529.02

13.1812.4913.9213.6415.7515.9018.0719.5924.0923.9327.6827.2832.4632.1238.6938.9743.4341.11

DESCO GENERAL PURPOSE LEFT HAND

DRILL BITS 118

5 Pc. Desco Left Hand Drill Bit Set

Stub Length118 Degree Point

1/8”, 3/16”, 1/4”, 5/16” 3/8”

Silver & Deming 1/2” Reduced Shank

8 Pc. Bit Set9/16”,5/8”,11/16”,3/4”,13/16”,7/8”,

15/16”,1”3 Side Flat shank

118 degree, 6” overall

HA7313715 Pc. Turbomax Drill

Bit Set 1/16” to 1/2 by 32nds

Jet Point Tip and flattened shank on 3/16” and

larger. Coated for longer life


Bit Set 1/2” Shank 1/16” to

1/2” by 64ths Jet Point Tip and flattened shank

on 3/16” and larger. Coated for longer life


Bit Set 1/16” to 3/8” by 64nds

Jet Point Tip and flattened shank on 3/16” and

larger. Coated for longer life

HA7313613 Pc. Hanson

Turbomax Drill Bit Set 1/8” to 1/4

by 64thsJet Point Tip

$22.14 $72.98$64.91 $142.54

HA6013613 Pc. HSS 118

degree Bright Finish Drill Bit Set

1/8” to 1/4 by 64ths

HA6013715 Pc. HSS 118

Degree Bright Finish Drill Bit Set 1/2”

Shank1/16” to 1/2 by

32nds

HA60221ZR21 Pc. HSS 118

Degree Bright Finish Drill Bit Set

1/16” to 3/8” by 64ths

HA6013829 Pc. HSS 118

Degree Bright Fin-ish Drill Bit Set 1/2”

Shank 1/16” to 1/2” by

64ths

HA6014715 Pc. HSS 118 Degree

Bright Finish Drill Bit Set 3/8” Shank1/16” to 1/2 by 32nds

$98.79$94.40$43.89$49.29$16.70

$50.64SIZE

1/16”5/64”3/32”7/64”1/8”9/64”5/32”11/64”3/16”13/64”7/32”15/64”1/4”17/64”9/32”19/64”5/16”21/64”11/32”23/64”3/8”25/64”13/32”27/64”7/16”29/64”15/32”31/64”1/2”

PART #

60504 60505 60506 60507 60508 60509 60510ZR 60511 60512 60513 60514 60515 60516 60517 60518 60519 60520 60521 60522 60523 60524 60525 60526 60527 60528 60529 60530 60531 60532

COST

1.171.201.371.411.501.281.301.411.591.761.912.042.262.663.073.293.393.704.224.724.755.385.406.016.367.477.537.997.92

SIZE

1/16”5/64”3/32”7/64”1/8”9/64”5/32”11/643/16”13/647/3215/641/417/649/3219/645/1621/6411/3223/643/825/6413/3227/647/1629/6415/3231/641/2

PART #

73304 73305 73306 73307 73308 73309 73310 73311 73312 73313 73314 73315 73316 73317 73318ZR 73319 73320 73321 73322 73323 73324 73325 73326 73327 73328 73329 73330 73331 73332

COST

3.443.443.503.503.592.092.152.312.482.923.053.443.554.594.925.485.666.606.607.607.799.669.66

11.4911.4912.8212.8214.7614.87

HA90108$210.66

SIZE

9/16”5/8”11/16”3/4”13/16”7/8”15/16”1”

PART #

9113691140911449114891152911569116091164

COST

16.4118.3020.4122.1325.3127.0730.9535.02

1/2” REDUCED SHANK

IRWIN IS A LIFETIME WARRANTY PRODUCT

A FAMILY OF FAMOUS BRANDS


HA301800229 Pc. COLBALT M35

Steel Drill Bit Set 1/2” Shank 1/16” to

1/2” by 64ths135 degree point

New removable Cartridges

$134.97

IRWIN INDIVIDUAL DRILL BITS

DE342-70$29.94

LEFT HAND STUB LENGTH INDIVIDUAL BITS

PART#DE31308LDE31312LDE31316LDE31320LDE31324L

SIZE1/8”

3/16”1/4”

5/16”3/8”

PRICE$1.67$2.11$2.45$3.44$5.15

DRILL BITS -- SCREW EXTRACTORS -- THREADING SYSTEMS

T98F (90596)8 Pc. 1/2” 3 Side Flat

Shank Bit Set 118 Degree Point

9/16”, 5/8”,11/16”,3/4”, 13/16”7/8”, 15/16” & 1”

$191.55

T98FHD (90595)8 Pc. 1/2” 3 Side Flat

Shank Bit Set 118 Degree Split Point Black & Bronze9/16”, 5/8”,11/16”,3/4”, 13/16”7/8”, 15/16” & 1”

$230.29

GENERAL PURPOSE 118 DEGREE

SIZE

9/16”5/8”11/16”3/4”13/16”7/8”15/16”1”

PART #

9413694140941449414894152941569416094164

118 Degree Thunderbit

T123 (90560)115 Pc. Set

General Purpose 118 degree point

1/16-1/2 by 64ths, 1-60, A-Z266.72

T123HD (99862)115 Pc. Set

Thunderbit 135 degree split point

1/16-1/2 by 64ths, 160, A-Z$345.72

T123C (99831)115 Pc. Set

Colbalt 135 degree split point

1/16-1/2 by 64ths, 1-60, A-Z$522.65DE34125

General Purpose118 Degree Point

15 Pc. Bit Pak3 ea of 1/16”, 5/64”,3/32”,7/64”, 1/8”$16.80


HA11135ZR35 Pc Screw Extractor/Drill

Bit Set by Hansen/IrwinChart showing which drill bits and screw extractors to use. 13-1/8” to 1/2” screw extractors and 16 left hand Cobalt drill bits

5/64” to 1/2” along with Six spiral screw extractors Ex-1

through Ex-6

$209.55

HA1111910 PC SET

Left Hand Cobalt Bits5/64” through

19/64” EX-1 through EX-5

$45.29

HA536456 Pc. Straight Flute Screw Extractor SetST-1 through ST-6

$19.90

Replacement Parts for

Extractor Spiral

HA52401HA52402HA52403HA52404HA52405HA52406HA52407

$1.74$1.98$2.07$2.35$3.13$6.68$12.75

IRWIN SCREW EXTRACTOR SETS

L629005 Pc. Extractor Set for both Right/Left Hand Threads

1/4” to 1/2”

$14.11

PART #9283392834928359283692837928389283992840928419284292843928449284592846928479284892849928509285192852928539285492855928569285792858928599286092861928629286392864928669286892870928729287492876928789288092884928889289292896

COST17.8716.9519.0217.8920.1319.7621.2619.9622.4021.5523.4622.2624.5323.6225.7024.1426.9425.9428.8027.4730.1928.8031.1029.5132.6231.6935.2433.6038.1837.1140.2637.8356.8754.7862.1858.4664.3863.7971.0268.0177.5085.0899.51

101.60

HA30505ZRHA30507HA30508HA30510HA30512ZRHA30514HA30516HA30518ZRHA30519HA31520HA30522HA30524HA30526ZRHA30528HA30530HA30532

5/64” 7/64” 1/8”5/32” 3/16”7/32”1/4” 9/32”19/64”5/16”11/323/8”13/32”7/16”15/32”1/2”

$3.24$3.44$4.20$4.74 $5.37$7.49$8.66$9.95$10.30$11.14$11.41$13.56$15.71$18.54$20.68$22.87

Replacement Parts for Left Hand Colbalt Bits

Straight Extractor

STIST2ST3ST4ST5ST6ST7

$2.16$2.31$2.59 $3.05$4.50$6.68$8.12

HA52601HA52602HA52603HA52604HA52605HA52606HA52607

SIZE33/64”17/32”35/64”9/16”37/64”19/32”39/64”5/8”41/64”21/32”43/64”11/16”45/64”23/32”47/64”3/4”49/64”25/32”51/64”13/16”53/64”27/32”55/64”7/8”57/64”29/32”59/64”15/16”61/64”31/32”63/64”1”1-1/32”1-1/16”1-3/32”1-1/8”1-5/32”1-3/16”1-7/32”1-1/4”1-5/16”1-3/8”1-7/16”1-1/2”

#1#2#3#4#5#6#7

Perfomance Threading System Drive Tool Drive with a die stock,

3/8” ratchet or t-handle Drive w/adjustable jaw

Die adapter accommodates standard 1”hex dies

$78.11HA4935055

Performance Threading System Self Aligning Taps 4 to 1/2”

$75.44HA4935352

SAE Alignment Dies 4 to 1/2-Inch with NC & NF Thread Pitches

HA4935058$75.44

GATSTD500NPGATMTG500NP

Choice$26.95 Ea.

STANDARD AND METRIC V-TAP GUIDE

Standard guide does 0-80 to 5/8 - 18 •taps.Metric Guide does 1.6mm to 16mm•Insures straight tap holes•

COST

19.8521.9024.2426.3729.5831.7136.0840.22

DRILL BIT SHARPENERS

DAR750X$139.95

DAR350X

$49.95


JA30246D3/8” Professional

Chuck and key 3/8-24 thread

JA31052D1/2”

Professional Chuck and key1/2-20 thread

The 350X is ideal for any home or workshop On Chuck alignment , eliminates alignment port for simpli-

fied sharpening Sharpens from 3/32” to 1/2” bits. Sharpening time 30-90 secondsSharpens High Speed Steel, Carbide, TIN coated and

masonry bitsUser replaceable sharpening stone available

The 750X is ideal for any ProfessionalOn Chuck alignment , eliminates alignment port for simplified

sharpening (Push Stop design for the split point tip) Sharpens from 3/32” to 3/4” bits. Can Sharpen Left Hand Bits with optional left hand chuck

to 1/2”Sharpens High Speed Steel, Carbide, TIN coated and Ma-

sonry bitsUser replaceable sharpening stone available

The 500X is ideal for any Professional On Chuck alignment , eliminates alignment port for simplified

sharpening Sharpens from 3/32” to 1/2” bits. Can sharpen Left Hand bits with optional left hand chuck to

1/2”Sharpens High Speed Steel, Carbide, TIN coated and

masonry bitsUser replaceable sharpening stone available

ACCESSORIESNEW STYLE DRILL DOCTOR

DARSA31120PA3/32” TO 1/2” CHUCK ADAPTER

$29.95DAR

350X

CHUC

K

DARSA02100PA3/32” TO 1/2” CHUCK

ADAPTER

$29.95DAR

500X

CHUC

K

DARDA70100PF3/32” TO 3/4” CHUCK

ADAPTER$39.95

DAR

750X

CHUC

K

DARDA02105PF3/32” TO 1/2”

LEFT HAND CHUCK ADAPTER (Left Hand Bits)

$39.95DAR

750x

OR

500

xCH

UCK $40.52

DAR 500X $99.95

$45.18 $45.18$29.36

JA303543/8” HandTite Keyless Chuck3/8-24 thread

JA31038D1/2”

Hand-Tite Keyless Chuck1/2-20 thread

UNIBIT STEP DRILL

V10231V10232V10233V10234V10235

1/8” to 1/2”3/16” to 1/2”1/4” to 3/4”3/16” to 7/8”1/4” to 1-3/8

V94312V94332V94352V94372

1/4”5/16”3/8”7/16”

2.552.663.704.44

MAGNETIC FRACTION-AL NUTSETTERS 1/4” SHANK 2-9/16 LONG

V92073ZRV92075ZRV92077

#1#2#3

.59

.59

.59

INSERT BITS 1-1/4” LONG 5/16” SHANK

26.8326.8348.3657.13

101.29

V93784V93787V93793

2”3”6”

2.874.277.94

V10502High Speed Steel

SetContains #1, 2,

and 3 Unibit Step Drill Bits

$88.25

3/8 DRIVE IRWIN SOCKET EXTENSION

UNIVERSAL CHUCK KEYS

BGCK381/4” - 3/8” SIZE

$3.95

BGCK123/8” - 1/2”

- 3/4” SIZES

$5.95

DAR

750x

OR

500

xST

ON

ES

DARDA31325GFDARDA31320GF

100 GRIT180 GRIT

CHOICE$24.95

REPLACEMENTS CHUCKS FOR DRILLS

V93795V93797

2”3”

3.985.70

1/2” DRIVE IRWIN SOCKET EXTENSION

V92025V92027V92035

V92135V92139V92141

#1#2#3

4-56-88-10

.43

.43

.43

.59

.59

.59

INSERT BITS 1-1/2” LONG 1/4” SHANK

CALL FOR QUOTES ON

PKS OF 50 OR MORE

4-11/16” Magnetic Screw Guide with Retracting Sleeves

Magnetic for better fastener • retention Reduces fastener slipping • and wobble

V93553$3.31

DRILL ACCESSORIES

GP1414HAGP1438HAGP1412HA

1/4 x 2 Hex3/8 x 2 Hex1/2 x 2 Hex

$6.928.019.92

GREY PNEUMATIC - 1/4” HEX TOSQUARE DRIVE DRILL

CHUCK ADAPTER

TITAN3PC. SOCKET ADAPTER SET

MILWAUKEE35PC. SHOCKWAVE DRILLING

AND DRIVING BIT SET

TI12082 $3.31

MIL48-32-4402 $27.00

ELECTRIC METAL WORKING ANGLE GRINDERS

MIL6146-30MIL6130-33METWP820-115METW8-115QMETWP8-115QDWD28402

MIL6117-33DWD28144METWE14-150QMIL6161-30

DWE4517METW24-180MIL6088-30MIL6066-6

DWE4559N

MILWAUKEEMILWAUKEEMETABOMETABOMETABODEWALT

MILWAUKEEDEWALTMETABOMILWAUKEE

DEWALTMETABOMILWAUKEEMILWAUKEE

DEWALT

11 A7 A7.5 A8 A8 A10 A

13 A13 A12 A13 A

15 A15 A15 A15 A

15 A

11,000 rpm11,000 rpm11,000 rpm10,000 rpm10,000 rpm11,000 rpm

11,000 rpm9,000 rpm9,000 rpm9,000 rpm

8,500 rpm8,500 rpm6,000 rpm6,000 rpm

6,000 rpm

5/8 - 115/8 - 115/8 - 115/8 - 115/8 - 115/8 - 11

5/8 - 115/8 - 115/8 - 115/8 - 11

5/8 - 115/8 - 115/8 - 115/8 - 11

5/8 - 11

PaddleSlidePaddleSlidePaddlePaddle

Paddle w/ lockPaddle w/ lockSlidePaddle w/lock

TriggerTriggerTriggerTrigger

Trigger

$111.80$ 67.60$ 86.36$155.96$160.80$112.19

$141.70$214.68$256.31$154.70

$198.45$253.29$177.45$205.40

$251.02

4-1/2”4-1/2”4-1/2”4-1/2”4-1/2”4-1/2”

5”5”/6”6”6”

7”7”7”/9”7”/9”

9”

WrenchWrenchWrenchQuick ChangeQuick ChangeWrench

WrenchWrenchQuick ChangeWrench

WrenchWrenchWrenchHub w/lock

Wrench

MIL6146-30 DWD28114 METWE14-115Q

CHOP SAWS & DRY CUT SAWSDWD28715DWD28710MIL6177-20METCS23-355

DW872

DEWALTDEWALTMILWAUKEEMETABO

DEWALT

15 A15 A15 A15 A

15A

4,000 RPM3,800 rpm3,900 rpm4,000 rpm

1,300 rpm

1”1”1”1”

1”

5.5 hp4 hp4 hp?

4 hp

$239.43$216.40$179.08$273.23

$603.38

14”14”14”14”

14”

3936.545.637

47 DW872


ELECTRIC DRILLS-SAWS-IMPACTSMIL0370-20MIL0233-20DWD112

MILWAUKEEMILWAUKEEDEWALT

KEYED DRILLKEYLESS DRILLKEYLESS DRILL

45 DE ANGLEPISTOLPISTOL

3.5 AMP5.5 AMP7 AMP

$137.80$109.14$ 75.24

3/8”3/8”3/8”

MIL0299-20MIL0234-6DW235GMIL1663-20MIL1660-6DW130V

MILWAUKEEMILWAUKEEDEWALTMILWAUKEEMILWAUKEEDEWALT

KEYED DRILLKEYED DRILLKEYED DRILLKEYED DRILLKEYED DRILLKEYED DRILL

PISTOLPISTOLPISTOLSPADESPADESPADE

8 AMP5.5 AMP7.8 AMP7 AMP7 AMP9 AMP

$128.70$161.85$121.03$331.50$249.60$209.76

1/2”1/2”1/2”1/2”1/2”1/2”

MIL5387-22MIL5378-20

MILWAUKEEMILWAUKEE

HAMMER DRILLHAMMER DRILL

PISTOLPISTOL

8.5 AMP7.5 AMP

$216.45$155.35

1/2”1/2”

0-1000/0-2500 rpm0-2500 rpm

MIL6232-21MIL6390-20MIL6577-20MIL6370-21MIL6370-20

MILWAUKEEMILWAUKEEMILWAUKEEMILWAUKEEMILWAUKEE

BAND SAWWOOD SAWWORM SAWMETAL SAW KITMETAL SAW

10.5 AMP15 AMP15 AMP13 AMP13 AMP

$336.20$156.00$205.40$325.00$312.00

44-7/87-1/47-1/48”8”

0-420 SPM5800 RPM4400 RPM3700 RPM3700 RPM

MIL9070-20MIL9071-20DW292DW293MIL9072-20MIL9075-20

MILWAUKEEMILWAUKEEDEWALTDEWALTMILWAUKEEMILWAUKEE

IMPACTIMPACTIMPACTIMPACTIMPACTIMPACT

DETENTHOG RINGDETENTHOG RNGDETENTDETENT

7 AMP7 AMP7.5 AMP7.5 AMP7 AMP7 AMP

$188.50$188.50$218.92$218.92$208.00$296.40

1/2”1/2”1/2”1/2”1/2”3/4”

300 FT LBS300 FT LBS345 FT LBS345 FT LBS0-300 FT LBS380 FT LBS

MIL0370-20

MIL0234-6

DW130VMIL1663-20

MIL6509-31MIL6536-21

MILWAUKEEMILWAUKEE

SAWZALLSAWZALL

12 AMP13 AMP

$140.40$206.70

0-2800 spm0-3000 spm


PIVOT HEAD FLASHLIGHTS

DW904DW906DW908

12 V14.4 V18 V

$30.60$37.80$36.35

FLASHLIGHT BULBS2 PER PACK

DW9043DW9063DW9083

12 V14.4 V18 V

$9.35$10.15$10.93

PIVOT HEAD FLASHLIGHTS

49-24-0185 28 V $33.57

MILWAUKEE Lithium-Ion Batteries Old Style Slide not “M” Series

FLASHLIGHT BULBS49-81-002049-81-003049-81-0040

12 V14.4 V18 V

$7.25$7.25$8.70

Extra bright xenon bulb

M12-M18 PIVOT HEADLED FLASHLIGHTS W/magnet 49-24-0146MIL2735-20 49-24-0171

M12M18 V M18

$46.40$56.55 $45.24

MILWAUKEE M12-M18 Batteries

48-11-184048-11-182848-11-181548-11-240248-11-240148-11-2830

M18XCM18XCM18 M12XC M12M28

155.15120.35$81.20$80.59$46.40172.55

48-11-1828

M12XCM28

FLASHLIGHTS

COMES IN A 2 PK

BATTERIES / CHARGERS / FLASHLIGHTS FOR CORDLESS TOOLS

Any M18 MilwaukeeAny M18 MilwaukeeAny M18 MilwaukeeAny M12 MilwaukeeAny M12 MilwaukeeAny 28 V Milwaukee

Red Lithium High CapacityRed Lithium High Capacity Compact Red LithiumRed Lithium High CapacityCompact Red LithiumLithium-Ion

3 Year3 Year2 Year3 Year2 Year3 Year

1.6 Lbs1.6 Lbs.95 Lb.9 Lb.4 Lb

4 Amp HR3 Amp Hr1.5 Amp Hr3 Amp Hr1.5 Amp Hr

48-11-1815 48-11-2402 48-11-2401

M12M18XC M18

48-11-2830

48-11-183048-11-223048-11-102448-11-2440

18 Volt18 Volt14.4 Volt12 Volt

130.50101.50$87.00$92.08

V18 Milwaukee Tools18 Volt NiCad Tools 14.4 Volt NiCad ToolsM12 Volt Lithium Tools

Lithium Ion NiCadNiCadLithium Ion

2 Years1 Year1 Year3 Year

1.8 Lb2.7 Lb1.8 Lb1 lb

3 Amp Hr2.4 Amp Hr2.4 Amp Hr4 Amp Hr

48-11-2230

48-11-1830 48-11-1024

MILWAUKEE CHARGERS

48-59-181248-59-2401MIL2510-20MIL2710-2048-59-0255

18-12 Volt12 Volt12 Volt18 Volt12-18 Volt

$60.90$53.65$92.08108.03$60.90

Any M18-M12M12 OnlyM12 Only 12 VoltM18 Only 18 Volt12V-18V NiCad

Lithium Lithium 12 onlyLithium 12 onlyLithium 18 onlyNiCad 12-18 Volt

5 Years5 Years5 Years5 Years5 Years

Wall ChargerWall ChargerComb wall/CigaretteComb wall/CigaretteWall Charger

48-59-0255MIL2710-2048-59-2401

48-59-181248-59-1801

DEWALT BATTERIES

DC9096DC9091DC9071DC9180DCB200DCB204

18 Volt14.4 Volt12 Volt18 Volt20 Volt20 Volt

107.78$87.94$79.79164.15130.57149.23

18 VOLT DEWALT14.4 VOLT DEWALT12 VOLT DEWALT18 VOLT DEWALT20 VOLT DEWALT20 VOLT DEWALT

NiCad XRPNiCad XRPNiCad XRPLithium IonLithium Ion MaxLithium Ion Max

2 Years2 Years2 Years3 Years3 Years3 Years

2.6 Lb1.8 Lb1.5 Lb3.12 Lb1.52 Lb1.52 Lb

2.4 Amp Hr1.7 Amp Hr1.7 Amp Hr2.4 Amp Hr3 Amp Hr4 Amp Hr

DC9071DC9096

DCB200

DEWALT CHARGERS

DC9310DC9319DCB101DCB119

7.2 - 187.2 - 1812 - 2012 - 20

$88.52131.31$88.73129.57

7.2-18 VOLT DEWALT7.8-18 VOLT DEWALT12V MAX - 20V MAX12V MAX - 20V MAX

All NiCad & Lithium IonAll NiCad BatteriesMAX Lithium IonMAX Lithium Ion

1 Year1 Year1 Years1 Year

Wall ChargerCigarette LighterWall ChargerCigarette Lighter

DC9310

DC9319

DCB101

DCB119

NEW 20 VOLT INGERSOLL RAND BATTERIES AND CHARGERS

IRBL2005IRBL2010IRBC1120

202020

108.75165.30$94.25

20V Ingersoll Lithium20V Ingersoll Lithium20V Ingersoll Lithium

20 Volt Lithium Battery20 Volt Lithium Battery20 Volt Lithium Wall Charger

1-2-31-2-31-2-3

IRBL2010

MIL2510-20

L5110 Has an impact-resistant housing to protect against corrosive fluids, chemicals and repeated drops.The versatile work light has a multi-position head, hands-free standing base and hang hook to light work spaces from any angle — high or low. The L5110 cord-less work light includes a power-ful white LED light that casts 180 lumens and lasts up to 20,000 hours. Works with battery and charger from the New W7150 Series 20V Impact Tools

IRL5110

20V

$86.78

DC9091

1.5 AMP3 AMP

IRBL2005 IRBC1120

CORDLESS IMPACT KITS

MIL2653-22MIL2654-22DC823KAIRW5130-K2IRW7150-K2DW059HK-2DW059K-2DCF889M2MIL2763-22MIL2664-22

FUEL MILWAFUEL MILWADEWALTI-RI-RDEWALTDEWALTDEWALTMILWAUKEEMILWAUKEE

1/4”3/8”3/8”3/8”1/2”1/2”1/2”1/2”1/2”3/4”

200 In Lbs200 Ft Lbs125 Ft Lbs190 Ft Lbs780 Ft Lbs300 Ft Lbs300 Ft Lbs300 Ft Lbs700 Ft Lbs525 Ft Lbs

2 Lithium 42 Lithium 42 Nicad2 Lithium2 Lithium2 NiCad2 NiCad2 Lithium2 Lithium2 Lithium

48-11-184048-11-1840DC9091BL2010BL2010DC9096DC9096DCB204 48-11-184048-11-1828

$343.20$377.00$306.62$408.20$527.96$408.01$408.01$416.14$474.50$513.50

CORDLESS IMPACT BARE TOOLS

18181820201818201818

3.83.84.66.86.87.557.556.756.86.8

Hog RingHog RingHog RingD-TentD-TentHog RingD-TentD-TentFrictionFriction

48-59-181248-59-1812DC9310IRBC1120IRBC1120DC9310DC9310DCB10148-59-181248-59-1812

DC825BMIL2653-20

DC823BMIL2654-20MIL2655B-20

DCF889BIRW7150DW059HBMIL2663-20MIL2662-20MIL2763-20MIL2664-20

DEWALTFUEL MILWA

DEWALTCOMP FUEL MILCOMP FUEL MIL

DEWALTI-RDEWALTMILWAUKEEMILWAUKEEMILWAUKEEMILWAUKEE

1/41/4”

3/8”3/8”1/2

1/2”1/2”1/2”1/21/2”1/2”3/4”

110 Ft Lbs100 FT Lbs

125 Ft Lbs200 Ft Lbs210 Ft Lbs

300 Ft Lbs780 Ft Lbs300 Ft Lbs450 Ft Lbs450 Ft Lbs700 Ft Lbs525 Ft Lbs

BARE TOOLBARE TOOL

BARE TOOLBARE TOOLBARE TOOL

BARE TOOLBARE TOOLBARE TOOLBARE TOOLBARE TOOLBARE TOOLBARE TOOL

DC909648-11-1840

DC909648-11-184048-11-1840

DCB204BL2010DC909648-11-182848-11-182848-11-184048-11-1828

$116.00$137.80

$136.50$169.00$169.00

$174.76$316.16$167.90$180.05$180.05$227.00$254.80

1818

181818

20201818181818

2.2

2.22.32.4

6.756.87.556.76.76.76.8

HexHex

Hog RingHog RingFriction

DetentDetentHog RingHog RingDetentHog RingHog Ring

DC931048-59-1812

DC931048-59-181248-59-1812

DCB101BL1120DC931048-59-181248-59-181248-59-181248-59-1812


MIL2603-22MIL2604-22DCD940KXDCD980M2IRD5140-K2

FUEL MILWAFUEL MILWADEWALTDEWALTINGERSOLL

1/2” DRILL1/2” HAMMER1/2” DRILL1/2 DRILL1/2” DRILL

48-11-184048-11-1840DC9096DCB200BL2010

$319.80$343.20$335.88$323.96$448.92

1818182020

56.255.25.4

2 sp 7252 sp 7253 sp3 SP2 SP 700

48-59-181248-59-1812DC9310DBC101BL1120

CORDLESS DRILL KITS

2 Lithium 2 Lithium2 NiCad2 Max Lith2 Lithium

PART # VOLT BRAND SIZE TORQUE BATTERIES WITH BAT# WITH CHGR # ANVIL WGT COST

PART # VOLT BRAND TYPE BATTERIES WITH BAT # WITH CHGR # SPEED WGT COST

PART # VOLT BRAND SIZE TOQURE IN THE BOX USE BAT # USE CHGR # ANVIL WGT COST

Price$137.80$158.60$105.30$126.25$105.30$144.30$146.82204.75

$237.90$341.90$159.25$137.80$105.30$206.70$128.05

$212.55$127.21$105.30$127.40

$136.50$191.10$208.10$149.95$182.50

$175.50$116.00$142.16

1/2” Fuel Drill/Driver1/2” Fuel Hammer Drill/Driver1/2” Drill/Driver Compact1/2” Hammer Drill CompactLithium Ion Right Angle Drill1/2” Driver Drill1/2” Driver Drill1/2” Driver Drill

7-1/4” Fuel Circular SawFuel Band Saw (Deep Cut)5 3/8” Metal SawJig SawHackzall Recip SawFuel SawZallSawZall

Caulk and Adhesive GunContractor RadioWet/Dry VacMultitool

Grease GunGrease GunGrease GunGrease GunGrease Gun

4 1/2” to 5” Fuel Grinder4 1/2” Grinder4 1/2” Grinder


OTHER BARE TOOLS THAT WILL FIT YOUR SYSTEM

IRIQV20-204$695.31

DCGG570K$263.16

18V Cordless Grease Gun Kit9,000 Max psi * 5 oz/min42” extra long flexable hose1 Battery, 1 Charger, Case

20 V Lithium Ion Grease Gun10,000Max psi * 5 oz/min16 cartridges per charge42” extra long flexable hose1 Battery, 1 Charger, Case

DCGG571M1$299.21Includes:

W7150 (1/2” Impact Wrench), W5130 (3/8” Impact), 2

BL2010 (20V Lithium Batteries), BL2005 (20 V Lithium Ion Bat-

tery), BC1120 (Charger)

INCLUDES: W7150 (1/2” Impact Wrench),

D5140 (1/2” Drill Driver), 2 BL2010

(20V Lithium Batteries), BC1120 (Charger)

IRIQV20-201$655.17

MIL2603-20MIL2604-20MIL2606-20MIL2607-20MIL2615-20DCD940BDCD980BIRD5140

MIL2731-20MIL2729-20MIL2682-20MIL2645-20MIL2625-20MIL2720-20DC385B

MIL2641-20MIL2790-20MIL0880-20MIL2626-20

MIL2446-20MIL2646-20IRLUB5130DCGG570BDCGG571B

MIL2780-20DC411BDCG412B

1818181818182020

18181818181818

1812-28

1818

1218201820

181820

48-11-184048-11-184048-11-181548-11-182848-11-1828

DC9096DCB200BL2010

48-11-184048-11-184048-11-182848-11-182848-11-182848-11-1828

DC9096

48-11-1815AC/DC Versatile

48-11-182848-11-1828

48-11-240248-11-1815

BL2005DC9096DCB200

48-11-1840DC9096DCB204

48-59-181248-59-181248-59-181248-59-181248-59-1812

DC9310DBC101BL1120

48-59-181248-59-181248-59-181248-59-181248-59-181248-59-1812

DC9310

48-59-1812Outlet

48-59-181248-59-1812

48-59-240148-59-1812

BC1120DC9310DBC101

48-59-1812DC9310DCB101

Part # Tool Type Battery # Charger #Volt

IRLUB5130-K1$357.50

Includes:LUB5130 (Grease Gun), BL2005

(20V Li-Ion Battery), BC1120 (20V Li-Ion Battery Charger),

Case

MILWAUKEEMILWAUKEEMILWAUKEEMILWAUKEEMILWAUKEEDEWALT NICADDEWALT LITHINGERSOLL RAND

MILWAUKEEMILWAUKEEMILWAUKEEMILWAUKEEMILWAUKEEMILWAUKEEDEWALT

MILWAUKEEMILWAUKEEMILWAUKEEMILWAUKEE

MILWAUKEEMILWAUKEEINGERSOLL RANDDEWALTDEWALT

MILWAUKEEDEWALTDEWALT

Brand4

4.12.933

6.255.25.2

7.5154.37.24.47.46.4

4.916.49.4

2.65

7.27.6988

5.84.65.1

WGT

W123766” Knot brush

5/8” - 11 6600 rpm, .023 WIRE

$65.77ME189050

6” Knot brush 5/8” - 11

6,500 rpm, .035 WIRE$21.16

7” - 9” ANGLE GRINDER BRUSHES

ME1890406” Knot brush

5/8” - 11 6500 rpm, .014 WIRE

$19.09

ME1890304” Knot brush

5/8” - 11 9000 rpm, .020 WIRE

$10.506” STRINGER BEAD WIRE BRUSH NARROW FACE

9,000 rpm .020 WIREME186030

5/8” - 11 Thread, $18.39

4”4”4”4”4”4”4”

4”

3-1/2”3-1/2”3-1/2”3-1/2”3-1/2”3-1/2”

3-1/2”3-1/2”3-1/2”3-1/2”3-1/2”3-1/2”

20,000 rpm20,000 rpm20,000 rpm20,000 rpm20,000 rpm20,000 rpm20,000 rpm

20,000 rpm



4” - 4-1/2” - 5” ANGLE GRINDER BRUSHES

W13150W13151W13152W13153W13155W13156

Weiler/Mercer Knot Brush Weiler- .023 Mercer- .020

M10 X 1.25M10 X 1.5M14 X 23/8” - 241/2” - 135/8” - 11

$24.95$24.95$24.95$24.95$24.95$20.50

Weiler/Mercer Crimp Brush Weiler- .014 Mercer- .020

W13175W13176W13177W13178W13180W13181

$23.81$23.81$23.81$23.81$23.81$20.50

M10 X 1.25M10 X 1.5M14 X 23/8” - 241/2” - 135/8” - 11

Weiler/Mercer Stringer Bead Twist Brush .020 WIRE

W130255/8” -11 Arbor

14,000 rpm$22.76

W13020M14 x 2 Arbor

$22.76

W132455/8” -11 Arbor

14,000 rpm$20.26

W13242M14 X 2 Arbor

$20.26

W13125W13126W13127W13128W13130W13131ME186010STAINLESSME186020

M10 X 1.25M10 X 1.50M14 X 23/8” - 24”1/2” - 13”5/8” - 11”5/8” - 11”

5/8” - 11”

$19.36$19.36$19.36$19.36$19.36$19.36$13.72

$21.40

Weiler/Mercer Crimp Flat Brush .014 WIRE

W13076W13077W13078W13081ME187010

M10 X 1.5M14 X 23/8” - 24”5/8” - 11”5/8” - 11”

$18.36 $18.36 $18.36 $18.36 $5.95

2-3/4” KNOT.014 WIRE 3” CRIMP

.014 WIRE

Weiler Crimp Wire Bevel Brush

W130955/8” -11

Arbor 12,500 rpm

$18.58

W13091M10 x 1.25

Arbor$18.58

3-3/8” BEVEL.0118 WIRE

Change a 5/8-11 arbor

to the size you need

W07771 Makita

M10x1.25$6.32

W07772Dewalt (B-D)

M10x1.5 Arbor$6.17

W142165” Crimp brush

5/8” - 11 8000 rpm, .020 WIRE

$37.67

W140364” Crimp brush

5/8” - 11 9000 rpm, .020 WIRE

$27.77

W123164” Knot brush

5/8” - 11 9000 rpm, .023 WIRE

$32.72

W127664” Double Row Knot

brush 5/8” - 11 9000 rpm, .020 WIRE

$41.08W12556

6” Double Row Knot Brush 5/8” - 11

6600 rpm, .023 WIRE$91.62

6” STRINGER BEAD TWIST WIRE BRUSH NARROW FACE 12,500 rpm 24 Knots

W087765/8” - 11 Thread, .023 WIRE

$25.99

6-7/8” ROUGHNECK WIRE BRUSH NARROW FACE 9000 rpm 56 Knots

W090005/8” - 11 Thread, .020 WIRE

$29.56

6” ROUGHNECK WIRE BRUSH NARROW FACE 12,500 rpm 56 Knots

W094005/8” - 11 Thread, .020 WIRE

$28.99

OTHER BRUSHES AVAILABLE.CALL FOR

SPECIAL QUANTITY PRICES OR OTHER TYPES THAT CAN

BE SPECIAL ORDERED

ARBOR ADAPTERS


14,000 rpm14,000 rpm14,000 rpm14,000 rpm12,500 rpm

4”4”4”4”4”

ME1880406” Crimp brush

5/8” - 11 6,500 rpm, .014 WIRE

$13.77

ME1880304” Crimp brush

5/8” - 11 9,000 rpm, .014 WIRE

$7.42

6” STAINLESS STEEL STRINGER BEAD WIRE BRUSH NARROW FACE 9,000 rpm .020 WIRE

ME1860405/8” - 11 Thread

$30.71

2-3/4”

2-3/4”

14,000 rpm

14,000 rpm

ME189010STAINLESSME189020

5/8” - 11

5/8” - 11

$ 8.05

$12.08

2-3/4”

2-3/4”

12,500 rpm

12,500 rpm

ME188010STAINLESSME188020

$ 7.30

$10.27

5/8” - 11

5/8” - 11

COST$39.41$57.14

$64.54

$59.26$85.75

$95.73$143.82

$117.92$185.01

RPM6,000 6,000

6,000

4,0004,000

3,6004,000

3,6003,000

RPM 6,000 6,0004,5004,5006,0006,0004,500

RPM9,0009,0006,0008,5004,500

COST$27.88$11.85$50.57$13.51

$228.57

WIDTH AT PLATE9/16”1/2”1/2”5/8”

1-7/8”

FACE WIDTH3/8”------

1/2”------

1-3/4”

TRIM LENGTH1-3/8”

------1-5/8”

------1-3/4”

ARBOR1/2” - 5/8”1/2” - 5/8”

5/8”1/2” - 5/8”

2”

PART # - SZW08565 6”ME184010 6”W08615 8”ME184020 8”W94008 10”

COST $23.43 $29.11 $9.43 $7.82 $28.84 $33.94 $12.41

WIDTH AT PLATE

1/2”7/8”3/4”1/2”1/2”7/8”3/4”

PART # - SZW02325 6”W06645 6”ME183010 6”ME183030B 6”W02335 7”W06655 7”ME183020 8”

ARBOR1/2” - 5/8”1/2” - 5/8”1/2” - 5/8”1/2” - 5/8”

5/8”5/8”

1/2” - 5/8”

TRIM LENGTH1-1/16”1-1/8”

------------

1-9/16”1-5/8”

------

FACE WIDTH5/8”7/8”------------

3/4”7/8”------

BENCH GRINDER BRUSHES AND STONES

PART # - SZW06080 6”W03070 6”

W03100 7”

W06110 8”W03150 8”

W06160 10”W03200 10”

W06190 12”W03230 12”

ARBOR2”2”

2”

2”2”

2”2”

2”2”

FACE WIDTH

1”1-1/4”

1-1/4”

1”1-1/2”

1-1/8”1-5/8”

1-1/4”1-5/8”

TRIM LENGTH

1-1/8”1-1/8”

1-5/8”

1-3/8”1-3/8”

2”1-7/8”

3”2-7/8”

WIDTH AT PLATE

15/16”1”

1”

1”1-3/8”

1”1-5/8”

1”1-9/16”

Grinding Wheel Dresser

Use on Wheels to 10” and 2” FaceKT5-7100

$27.88

Set of Replacement

Cutters for Wheel DressersKT5-7105$4.22 SET


6” 1/2” 4,138 --------- 28003 ---------- 28004 28005 $17.54

6” 3/4” 4,138 ---------- 655401 ---------- 655402 655403 $17.27

6” 1” 4,138 655405 655406 ---------- 655407 655408 $19.62

7” 3/4” 3,600 ---------- 28010 ---------- 28011 28012 $25.99

7” 1” 3,600 655410 655411 ---------- 655412 655413 $23.75

8” 3/4” 3,600 ---------- 28020 ---------- 28021 28022 $32.06

8” 1” 3,600 655414 655415 ---------- 655416 655417 $29.94

10” 1” 2,483 655419 655420 28043 655421 28042 $53.43

10” 1-1/2” 2,483 ---------- 655423 ---------- 655424 28052 $73.32

12” 2” 2,069 655425 655426 28061 655427 --------- $119.18

14” 2” 1,773 655428 655429 28071 655430 ---------- $166.16

SIZE WIDTH RPM 24 36 46 60 80 COST

BENCH GRINDER STONES

Reusable Metal AdaptersFor all 2” I.D. Wheels

Sold In PairsPart #W03809

W03810

W03811

W03824

W03812

W03813

W03814

Price $1.87

$1.87

$1.87

$1.87

$1.87

$1.87

$2.26

SIZE 1/2 5/8”

3/4” 7/8” 1” 1-1/4” 1-1/2”

With Reducing Arbor

DW7566” Bench Grinder4 amp 3450 rpm

5/8 Hp, 1/2” Arbor

DW7588” Bench Grinder

4.2 amp 3600 rpm3/4 Hp, 5/8” Arbor

$113.10 $154.70

BENCH GRINDERS AND ACCESSORIES

METDS1757” Bench Grinder

3.7 amp 3570 rpm1” Arbor 32 LBS

$229.71

METDS2008” Bench Grinder

4.8 amp 3570 rpm1-1/4” Arbor 41 LBS

$313.13

METDSD25010” Bench Grinder7.5 amp 1780 rpm

1-1/4” Arbor 74 LBS

$483.60

DW850014” Dewalt

Diamond Edge Chop Saw Blade14” x 7/64” x 1”

4300 rpm

$218.40 Each

DW8026DW8027

DW8024DW8025

12” X 1/8” X 1” 12” X 1/8” X 20MM

14” X 5/32” X 1”14” X 5/32” X 20MM

DEWALTDEWALT DEWALTDEWALT

6400 RPM 6400 RPM 5500 RPM5500 RPM

Box of 1062.1062.10

100.00100.00

Each6.906.90

11.1111.11

Box of 1062.1062.10

91.4091.40

Each6.906.90

10.1510.15

6400 RPM6400 RPM

5500 RPM5500 RPM

DEWALTDEWALT

DEWALTDEWALT

12’ X 1/8” X 1”12” X 1/8” X 20MM

14” X 1/8” X 1”14” X 1/8” X 20MM

12” & 14” CHOP SAW BLADESDW8001

14” Dewalt General Purpose Chop Saw Blade14” x 7/64” x 1”

4300 rpm$6.25 eaDW8001-10

Box of 10$56.30

DW800214” Dewalt Bar Cutter Chop Saw

BladeWorks best in 1/4” & Heavier Steel

Applications. 3 x’s long but will glaze over in light gage steel14” x 7/64” x 1”

4300 rpm$6.25 EA.

DW8002-10 Box of 10 $56.30

MET61633814” Metabo General

Purpose Chop Saw Blade14” x 3/32” x 1”

4300 rpm$7.47 EA

MET616338-10Box of 10 $67.20

BG24CW14764P14” HIT

General Purpose Chop Saw Blade

14” x 1/8” x 1”4400 rpm

$5.41 EABG24-CW14764P-10

Box of 10 $48.70

12” CHOP SAW BLADES LOW RPMDW8004

12” Dewalt General Purpose Chop Saw Blade12” x 7/64” x 1”

5000 rpm

$6.11DW8004-10

Box of 10 $55.00

16” CHOP SAW BLADES LOW RPMDW8010

16” DEWALT GENERAL PURPOSE16” x 7/64” x 1”

3800 rpm$11.27 EA

DW8010-10Box of 10 $101.40

MET616337

12” Metabo General Purpose Chop Saw Blade12” x 3/32” x 1”

5100 rpm

$5.44 EAMET616337-10

Box of 10 $49.00

DW8022 DW8023

DW8020DW8021

Metal High Speed Chop Saw Blades for Hand Held

Saws

MASONARY High Speed Chop Saw Blades for Hand Held Saws

MULTICUTTER SAWDRY CUT BLADES

SBF-120060SBF-120100

SBF-140080SBF-140120

DWA7747

MIL48404505MIL48404510

12” 60 TEETH12” 100 TEETH


14” 70 TEETH


1,800 RPM1,800 RPM

1,500 RPM1,500 RPM

1,800 RPM

1,800 RPM1,800 RPM

$ 68.45$ 75.85

$ 83.25$ 90.65

$ 130.03

$ 162.12$ 181.30


MET616215016” Metabo

General Purpose Chop Saw Blade16” x 3/32” x 1”

3820 rpm$11.73 EA

MET616215-10Box of 10 $105.60

STEEL CUTTING CIRCULAR SAW BLADES

SBF-065048SBF-067540SBF-072536SBF-08004848-40-452048-40-4515

6-1/2” 48 Teeth 5/8 dia6-3/4” 40 Teeth7-1/4” 36 Teeth 5/8 dia8” 48 Teeth 5/8 Dia8” 50 Teeth8” 42 Teeth

FitsMilwaukeeDewalt 20mm

Milwaukee MilwaukeeMilwaukee

Each$ 24.51$ 23.59$ 22.66$ 27.75$ 59.57$ 52.92

For Low RPM Saws

High Quality steel cutting saw blades have been designed with C-6 carbide tips and a triple chip grind to cut though all types of mild steel/ferous metals such as steel studs, piping, tubing, channel, flat stock, rebar and more. Carbide resist breakage and last much longer than abrasive discs. These blades last anywhere between 5 and 40 times longer than abrasive discs. They also leave a cleaner cut without sharp burrs.

STEEL & FERROUS CUTTING BLADES

48-40-4530 8” 60 Teeth .082 Milwaukee $ 49.63BLADES TO CUT NON FERROUS METALS

Used Only On Low RPM Saws

ME602020General Purpose Chop

Saw Blade14” x 3/32” x 1”

4400 rpm

$6.13 EA

ME602020-10Box of 10 $55.20

ALUMINUM OXIDE FIBER DISC FOR GRINDERS ALUMINUM OXIDE FLAP DISC FOR GRINDERS


24 GRIT (5 PC.)36 GRIT (5 PC.)60 GRIT (5 PC.)80 GRIT (5 PC.)16 GRIT (25 PC.)24 GRIT (25 PC.)36 GRIT (25 PC)50 GRIT (25 PC)60 GRIT (25 PC)80 GRIT (25 PC)100 GRIT (25 PC)120 GRIT (25 PC)

$6.27$6.27$5.83$5.62

$31.98$29.36$29.36$27.96$27.48$27.30$27.30$27.30

DW8306DW8308DW8309DW8310

36 GRIT (EACH)60 GRIT (EACH)80 GRIT (EACH)120 GRIT (EA)

$6.23$6.23$6.23$6.23

DW8321DW8323DW8324DW8325

36 GRIT (EACH)60 GRIT (EACH)80 GRIT (EACH)120 GRIT (EA)

$12.93$12.93$12.93$12.93

4-1/2”4-1/2”4-1/2”4-1/2”

7”7”7”7”

DARB1G0205DARB1G0305 DARB1G0605DARB1G0805

ME304016ME304024ME304036ME304050ME304060ME304080ME304100ME304120

4-1/2”4-1/2” 4-1/2” 4-1/2”

7”7”7”7”7”7”7”7”

ANGLE GRINDER ABRASIVES

GRINDING WHEELS FOR ANGLE GRINDERS

4” X 1/4” X 5/8”4” X 1/4” X 5/8”4” X 1/4” X 5/8”

4-1/2” X 1/4” X 7/8”4-1/2” X 1/4” X 7/8”4-1/2” X 1/4” X 5/8-114-1/2” X 1/4” X 7/8”4-1/2” X 1/4” X 5/8-11

5” X 1/4” X 7/8”5” X 1/4” X 7/8”5” X 1/4” X 7/8”

6” X 1/4” X 7/8”

7” X 1/4” X 5/8-117” X 1/4 X 7/8”7” X 1/4” X 5/8-117” X 1/4” X 7/8”7” X 1/4” X 5/8-117” X 1/4” X 7/8”7” X 1/4” X 5/8-11

9” X 1/4” X 5/8-119” X 1/4” X 7/8”9” X 1/4” X 5/8-119” X 1/4” X 7/8”9” X 1/4” X 5/8-119” X 1/4” X 5/8-11

$1.18$1.79$1.79

$1.70$1.98$3.40$1.86$3.61

$1.70$2.94$2.96

$3.47

$5.24$2.70$5.57$4.03$5.95$3.69

$10.22

$8.16$4.68$7.22$6.18$8.63

$13.37

BG24DCGW4-2DW4419MET616745

BG24DCGW141DW4514ZDW4523ZMET616307MET655307

BG24DCGW5-2DW4619MET616308

MET616319

BG24DCGW7HBG24DCGW7-2DW4999DW4719MET655782MET616782MET655788

BG24DCGW9HBG24DCGW9-2DW4954DW4949MET655784MET655789

4”4” 4”

4-1/2”4-1/2”4-1/2”4-1/2”4-1/2”

5”5”5”

6”

7”7”7”7”7”7”7”

9”9”9”9”9”9”

HITDEWALTMETABO

HITDEWALTDEWALTMETABOMETABO

HITDEWALTMETABO

METABO

HITHITDEWALTDEWALTMETABOMETABOMETABO-Z

HITHITDEWALTDEWALTMETABOMETABO-Z

CUT OFF WHEELS FOR ANGLE GRINDERS

4” X 1/16” X 5/8”4” X .040” X 5/8”

4-1/2” X 1/16” X 7/8”4-1/2” X .045” X 7/8”4-1/2” X .040” X 7/84-1/2” X 1/16” X 7/8”4-1/2” X .045” X 7/8”

5” X .040” X 7/8”

6” X .040” X 7/8”6” X .040” X 7/8”

$0.75$1.33

$0.95$1.81$1.37$1.52$1.52

$1.72

$1.89$2.26

OLY57-426MET655324

BG24CCW12P2DW8062ZMET655331MET655332MET655346

MET655334

MET655339DW8725Z

4”4”

4-1/2”4-1/2”4-1/2”4-1/2”4-1/2”

5”

6”6”

HITMETABO

HITDEWALTMETABOMETABOMETABO-D

METABO

METABODEWALT

MIL6146-30

METWE14-115Q

SIZE PART # BRAND SIZE-THICK-HOLE EACHBG24DCGW4-2-25DW4419-25MET616745-25

BG24DCGW141-25DW4514Z-25DW4523Z-25MET616307-25MET655307-25

BG24DCGW5-2-25DW4619-25MET616308-25

MET616319-25

BG24DCGW7H-10BG24DCGW7-2-10DW4999-10DW4719-10MET655782-10MET616782-10MET655788-10

BG24DCGW9H-10BG24DCGW9-2-10DW4954-10DW4949-10MET655784-10MET655789-10

CASE PART #252525

2525102525

252525

25

10101010101010

10 1010101010

CASE QTY$1.06$1.61$1.61

$1.51$1.78$3.06$1.67$3.25

$1.51$2.65$2.66

$3.12

$4.72$2.43$5.01$3.63$5.36$3.32$9.20

$7.34$4.21$6.50$5.56$7.77

$12.03

COST EA

OLY57-426-50MET655324-50

BG24CCW12P2-100DW8062Z-25MET655331-100MET655332-100 MET655346-100

MET655334-50

MET655339-50DW8725Z-25

5050

10025100100100

50

5025

$0.68$1.20

$0.86$1.63$1.23$1.40$1.40

$1.60

$1.75$2.14

SIZE PART # BRAND SIZE-THICK-HOLE EACH CASE PART # CASE QTY COST EA

DWD28114N

$26.50$40.30$40.25

$37.75$44.50$30.60$41.75$81.25

$37.75$66.25$66.50

$78.00

$47.20$24.30$50.10$36.30$53.60$33.20$92.00

$73.40$42.10$65.00$55.60$77.70

$120.30

CASE TOTAL

$34.00$60.00

$86.00$40.75

$123.00$140.00$140.00

$80.00

$87.50$53.50

CASE TOTAL

Milwaukee Ice Hardend Hole Saw Kits

Best suited For

SUPER SAWZALL BLADES MILWAUKEE

MILWAUKEE METAL CUTTING BLADES

MILWAUKEE GENERAL PURPOSE CUTTING BLADES

48-00-518148-00-518248-00-5187

48-00-518348-00-518448-00-518848-00-5189

48-00-518548-00-5186

141414

18181818

2424

4 x 3/46 x 3/49 x 3/4

4 x 3/46 x 3/49 x 3/412 x 3/4

4 x 3/46 x 3/4

8.7912.03 14.80

9.8012.03 16.3720.44

8.79 12.03

3/16-1/4 tube channelmore flexible 1/8-3/16

more flexible1/8-3/16

less than 1/8

Catalog number5 pk

Teeth per Inch

Length by Width

Cost per 5 Pk

Best suited For

Catalog number5 pk

Teeth per Inch

Length by Width

Cost per 5 Pk

48-00-509048-00-5092

48-00-509148-00-509348-00-5094

48-00-519348-00-5194

1010

8/128/128/12

10/1410/14

4 x 3/46 x 3/4

6 x 3/48 x 3/412 x 3/4

8 x 5/812 x 5/8

8.7912.03

12.03 15.54

23.50

14.80 21.37

Wood

WoodsNon Ferrous Metals

Woods,Non FerrousMetals and Aluminum

MILWAUKEE FAST CUTTING WOOD BLADESBest suited

ForCatalog number

5 pkTeeth per Inch

Length by Width

Cost per 5 Pk

48-00-503548-00-503648-00-503748-00-5041

6664/6

6 X 3/49 X 3/412 X 3/46 X 1/2

14.2518.7821.3715.54

Very Fast Cutting wood and general ruffing in.

49-56-001249-56-001749-56-002349-56-002749-56-003249-56-003749-56-004349-56-004749-56-005249-56-005749-56-006249-56-006749-56-007249-56-007749-56-008249-56-008749-56-009249-56-009749-56-010249-56-010749-56-011249-56-011749-56-012249-56-012749-56-013249-56-013749-56-014249-56-014749-56-015349-56-015849-56-016349-56-016749-56-017349-56-017749-56-018349-56-018749-56-019349-56-019749-56-020349-56-020749-56-021349-56-021749-56-022349-56-022749-56-023349-56-023749-56-024349-56-024749-56-0253

5/8”11/16”3/4”13/16”7/8”15/16”1”1-1/16”1-1/8”1-3/16”1-1/4”1-5/16”1-3/8” 1-7/16”1-1/2” 1-9/16”1-5/8” 1-11/16”1-3/4” 1-13/16”1-7/8”2”2-1/16”2-1/8”2-1/4” 2-5/162-3/8”2-1/2”2-9/16”2-5/8”2-3/4”2-7/8”3”3-1/8”3-1/4”3-3/8”3-1/2”3-5/8”3-3/4”3-7/8”4”4-1/8”4-1/4”4-3/8”4-1/2”4-3/4”5”5-1/2”6”

6.70 6.70 6.70 6.70 6.70 6.70 7.07 7.07 7.07 7.07 7.07 7.07 7.46 7.46 7.46 7.46 7.46 7.46 9.36 9.36 9.36 9.36 11.49 11.49 11.49 11.49 11.49 12.32 12.32 12.32 12.32 12.32 12.62 12.62 12.62 12.62 12.62 13.69 16.78 17.48 18.52 19.81 26.21 30.8836.3340.3344.8353.7462.68

Part # SIZE Each

48-39-0551 10/14 teeth48-39-0501 10 teeth48-39-0511 14 teeth48-39-0521 18 teeth48-39-0531 24 teeth48-39-0560 14/18 teeth

3 Pk $20.35


TOUGHEST NAIL/WOOD

BLADE MILWAUKEE

Best suited For

Catalog number5 pk

Teeth per

Length by Width

Cost per 5 Pk

48-00-502148-00-5026

5/85/8

17.86 23.13

Demolition and remodeling

6 x 19 x 1

TOUGHEST DEMOLITION MILWAUKEE BLADE

Best suited For

Catalog number5 pk

Teeth per Inch

Length by Width

Cost per 5 Pk

48-00-578248-00-5784

48-00-578748-00-5788

1418

1418

6 X 16 X 1

9 x 19 x 1

16.65 16.65

22.11 22.11

pipe, conduit, angle iron, steel and other hard metals

MILWAUKEE PORTABLE BAND

SAW BLADE 44-7/8”

49-56-7240 Arbor 7/16 Shank for 1/2” Drill or Larger for 1-1/4” or Larger Hole Saws 49-56-8000 included

17.4849-56-7150 Arbor 3/8” Shank for 3/8” Drill or Larger for 1-1/4” or Larger Hole Saws

$13.88

BUZZARD GULCH INC800-821-2932

49-22-417515 PC. Ice Hardened

Hole Saw Kit$125.82

Kit Includes:3/4”,7/8”,1”,1-1/8”, 1-3/8”,1-1/2”,1-3/4”,2”, 2-1/8”, 2-1/4”, 2-1/2”2 Arbors, 2 Bits, Adaptor, Spacer, Box


Hole Saw Kit$179.82

Kit Includes:3/4”,7/8”,1-1/8”, 1-3/8”, 1-1/2”,1-3/4”, 2-1/4”, 2-5/8”,3” ,3-1/2”,4”,4-1/4”, 4-1/2” 2 Ar-bors, 3 Bits, Adaptor, Spacer, Box


Hole Saw Kit$172.32

Kit Includes:3/4”,7/8”,1-1/8”, 1-3/8”, 1-1/2”,1-3/4”,2”, 2-1/4”, 2-1/2” 2-5/8”,3” ,3-5/8”,4-1/8”, 4-3/4” 2 Arbors, 3 Bits, Adaptor, Spacer, Box

Ice Hardened Hole Saws Lasts up to 50% Longer, Optimized tooth form for up to 2x faster cutting, Matrix II bi-metal teeth for greater durability. Has a hardening process that hardens to the core of the metal for more hard metal. It does not wear away as quickly.

MILWAUKEE HOLE SAW ARBORS

HOLE SAW QUICK CHANGE ARBORS

49-56-69501/4” round shank for 9/16” to 1-3/16” hole saws. Comes with 49-56-8000 bit

$6.2949-56-70103/8” hex shank for 9/16” to 1-3/16” hole saws. Comes with 49-56-8000 bit

$8.0549-56-70007/16” hex shank for 9/16” to 1-3/16” hole saws. Comes with 49-56-8000 bit

$8.7949-56-91007/16” HEX shank for 1-3/6” to 6” hole saws. Comes with bit

$17.48

49-56-8000-General Wood and metaluse with 49-56-6950 & 7000 $2.96

49-56-8002-Light gauge metal

use with 49-56-6950,7000, & 7140 $2.96

49-56-8010-Wood and MetalUse with 49-56-7010 & 7150 $2.87

Milwaukee 49-22-4095 Electricians

Ice Hardened Hole Saw Kit,

10-Piece

$74.85

AX

7/8”, 1-1/8”, 1-3/8”, 1-3/4”

2”, 2-1/2”

2 Arbors 2 Bits

Adaptor and Spacer, Box

35-3/8” x 1/2” x .0248-39-0519 14 teeth48-39-0529 18 teeth48-39-0539 24 teeth

3 Pk$20.18

The Vaper Non-Aerosol Spot Sprayer is an eco-friendly pressurized sprayer that does not require the use of harmful or dangerous propel-lants. Plus, there are no aerosol disposal issues to deal with. Not for use with paint products.Features + Benefits

80–150 PSI operating pressure 200 PSI max. pressure Refillable Maximum capacity: 32 oz. Not for use with paint products Do not use with flammable propellants

EST-67W/Case

$80.80

TWIN Laswer-58 TO 1112 F

DEGREES

6 & 12 V Battery Tester - 12 & • 24 V Charging System Tester. Guided test sequence covers • - battery, cranking volts and charging system. Battery test results include • Diagnosis of battery condition also displayed. 2 line LCD display in 7 • languages. Tests discharged batteries • down to 1.5VCCA Test range: 40-2000 CCA • Rating Systems: SAE, DIN, • EN, IEC Temperature Compensation •

ES725Battery &

Starting Tester$303.19

500 amp adjustable load carbon pile•Tests batteries rated as high as 1000 CCA or 160 •Amp hour15 second test with audible tone•Can also test alternators, regulators, and starters•500 amp side terminal clamps and heavy duty •stranded copper cablesMeters are color coded for simple pass or fail •diagnosticIncludes temperatures compensations chart•

ES333$123.99

#332 is the ideal tool for easy and accurate mea-surement of RPM in almost any environment. Sim-plyaimthelaserbeamatareflectivemarkplacedon a rotating device, push the button and the RPM reading is immediately displayed. No contact with the shaft or wheel is necessary. The laser beam is not affected by shop light and can detect RPM from longer distances of up to 6 feet away. The #332 can measure up to 99,999 RPM in 1 RPM increments. It can be used to measure RPM on coil-on-plug and diesel engines, where conventional inductive tachometers can not be used. Other uses include generators, compressors, industrial engines, fans, gears and more. Zipperedcase,reflectivetape,instructions&9Vbattery included. TEST RANGE: RPM 0-99,999 RPM

Features: Memory function saves maximum and

minimum RPM readings Great tool for easy and accurate measure-

ment of RPM

Reflectivetapeincluded

FEATURES:Build in Laser PointerC/F Switchable ButtonBacklitLCDDisplayData HoldAuto Power Off+ / - 2% degree ac-

curacy1 Yr Warranty

USES:Fluids on equipmentBearing TemperatureSickAnimalsRadiatorsHeatersGrain

ES LAZER PHOTO TACH

ES-700Battery Tester

120 Amp Load CapacityTestBatteryVoltage,Starter Current Draw,

Charging VoltageandBattery

Condition

$47.72

ES-706Digital Battery Tester

120 Amp Load Capacity

Only Digital availableShowsOK,Weak

or Bad

$79.07


EST-65W/Case

$80.80

-58 TO 1022 F

DEGREES

EST-75W/Case

$191.07

-58 TO 1832 F

DEGREES

ES65410 pc

ReflectiveStripTapes

$10.95

ES-332$95.52

LaserlikeES332orContact

Tachometer Range: 0 to 99,999 RPM

Accuracy: + 0.05% + 1 digit

Memory: Min/Max/Avg Stores 10 RecordsDisplay: 5 digit LCD w/backlighting

8-1 Ratio

12-1 Ratio

12-1 Ratio

INFARED THERMOMETERS

Laser/Contact/

Non-Contact/Ta-chometer

ES Battery Testers

ES710500 Amp Load Tester

$131.34

SUREM2400Anodized Aluminum Sprayer

Can (Silver Color)24 oz. can be used with water sol-•vent and oil based materialsModel M uses the same nozzles and •extenstions as Model A sparyerMax Pressure 200 psi•Adjustablefromextrafinetopin•stream

$81.75

SURE1000ASteel Pressurized Spray Can (Green

color)1 Qt. Can (32 oz) can be used with •most oil or solvent materialsFill 2/3 full with product•Pressurize 80-150 psi•Comes with multi purpose nozzel set •for regular mist

$54.82

TI19419$31.43

TI19420-SPRAYER REPAIR KIT FOR 19419. $10.95

MODEL M

NEW

MIK5Partial Repair Kit

108, 110, 114, 116, 120, 121, 302, 309

$15.60

MILK10Complete Repair Kit

Contains K5 Plus 111, 115, 117, 118, 307

$22.40

301302 305 325 335 330 156118

SOLID PIN STREAM JETSPRAY REGULARSPRAY FINE6” RIGID PIPE12” BENDABLE BRASS12” FLEX TEFLON TUBETEFLON FILLER CAP120-121-122

$3.40 $4.6010.40$7.40 $8.80 14.20 11.20$9.40

MODELA

SURE SHOT BRAND

PARTS ONLY

55 LED Task Light55 High Intensity LED Lamps Push On/Off Switch in Handle Top and Bottom Bumpers Ergonomic Finger Grips Dual Hanging Hooks Rotate 360° 15 ft Cord

PROKTL5515

30 LED Cordless Task Light30 High Intensity LED Lamps Operated on 3 Replaceable "AA" Batteries Dual Brightness Levels 3 Position Push Switch in Handle Top and Bottom Bumpers Ergonomic Finger Grips Stand-Up Base Dual Hanging Hooks Rotate 360°

PROKTB3000PROKTP3001

PROKTP30R

$28.16 $66.74$45.41

$22.8430 High Intensity LED Lamps 1 Watt Luxeon© LED Top Spot Lamp Dual Brightness level Side Lights Operated on Rechargable battery pack 4 postions On/off swith in handle Top nadn Bottom bumpers Ergonomic Finger GripsStand-Up Base Dual Hanging Hooks Rotate 360°

280 Lumen Rechargable

Task Light3 CREE LED’s Dual Brightness levels Includes 2 Quick Change Battery Packs Charging Cradle uses 120V A/C Automotive Accessory Plug Low Battery Indicator Light Two Folding Swivel Hooks Rotation Removable Magnet Mount Stand Up Base

30 LED COMBO

TASK LIGHT

PROLER48CRECHARGEABLE Battery

Powered Task Light Push Button for Hi/LowOn/Off SwitchBattery Charger 7.2 Volt2-Folding Swivel HooksHolster Style Carrying

PRO8050AQ26 Watt CFL fluorescent lamp• 16-3-50’ 9 Amp Cord • Grounded outlet built into handle • Shatterproof lens and housing • No Tool Bulb Replacement•

COXPC13-5012BHeavy Industrial Use12-3 50’ Quad Outlet Extension Cord Reel

$455.91


COXPC13-5012AHeavy Industrial Use

12-3 50’ Single Outlet Extension Cord Reel

$396.76

PROLER24CRECHARGEABLE Battery

Powered Task Light 24 High Intensity LED lampsOn/Off SwitchBattery ChargerFolding Swivel HookHolster Style Carrying Case

24 LED

LAMPS

PROLE30-1530 High Intensity LED

lampsOn/Off SwitchSwivel Hanging Hook

PROLE60-1560 High Intensity LED

lampsOn/Off SwitchSwivel Hanging Hook

30 LED 60 LED

PRO920LS20 Led Lamps

Retractable Cord Reel18/2 20’ cordOn/Off switch in handle

PRO8040T-P3 Outlet Extension Cord Reel12-3-40’ 15 AmpINDUSTRIAL GRADEEpoxy Coated Steel Housing3 Grounded Outlets w/resettable

circuit breaker

PRO8050M-P3 Outlet Extension Cord Reel• 14-3-50’ 13 Amp• INDUSTRIAL GRADE• Epoxy Coated Steel Housing• 3 Grounded Outlets w/resettable • circuit breaket

$21.30

$32.52

$31.75

$109.26$104.54

PRO8050M-WWork Light with Built in Circuit

breaker14-3-50’ 13 Amp Cord• Magnetic Clip• Quick Release Bracket•

$119.50

48 LED

LAMPS$60.86

PRO LEC60-1512 Volt DC Automotive LED task light with 60 high intensity LEDs Recessed On/Off switch 12 V DC accessory plug Hanging hook rotates 360° or will lay flat on surfaces to project light up Slim ergonomic design soft finger grips 15 ft Cord LED’s Operate in freezing tempera-tures

PRO LEC30-1512 Volt DC Automotive LED

task light with 30 high intensity LEDs

12 V DC accessory plug Hanging hook rotates 360° or

will lay flat on surfaces to project light up

15 ft Cord LED’s Operate in freezing

temperatures

LIN9102850FT Medium Duty Retractable Reel

with60 LED Light

14 Gauge• 18 AWG• 1 year warranty•

LIN9102950ft Medium Duty Re-

tractable Reelwith

Triple Tap14 Guage• 4 ft. 3 Prong pwr cord• 1 year warranty•

$165.70

PRO5050LLRetractable 50 ft cord reel

with rugged powder coated steel housing reel

55 LED $71.56

$38.90

$38.86 $26.61

$115.42

$194.40

PRO5030AH500 Lumin LED Work Light Grounded Outlet in Handle

16-3 30’ CordPower On Indicator Light in

Handle$77.63

PRO8040T-PS3 Outlet Extension Cord Reel

12-3-40’ 15 AmpCold Weather Cord

Epoxy Coated Steel Housing3 Grounded Outlets w/reset-

table circut breaker$114.28

100 LED Corded Flood LightFlood Light with 100 High Inten-

sity LED Lamps Unit Tilts 360° on Base that can

be Mounted to a Tripod Wall or Ceiling Mount Capabil-

ity; Hardware Included Convenient On/Off Switch Rain Proof - UL Approved 120 Volt AC 15 ft SJTOW Cold Weather Cord Energy Efficient LED Light

Source, only 8 Watts Stays Cool in use

PROLEP100$64.06

COXPC13-5016DHeavy Duty Industrial

16 GA. 50’ Angle Fluorescent

Trouble lightCord Reel

$348.53

COXPC13-5016CHeavy Duty Industrial

16 GA. 50’ Fluorescent Trouble light

Cord Reel

$339.43

Two Hanging HooksEasy On/Off SwitchUL Approved Charger 120 V 60 HZ78 Pc. 14000 MCD L.E.D.High Impact ABS Housing with Soft Spray GripRecharge Time: 3 HoursWorks for up to 5 Hours on a Single ChargeSolid State L.E.D.’s. Do not Burn Out. Typical Lifetime 10+ YearsRemovable Magnetic Clamp and Mounting Bracket Included115 Volt Wall Charger

BG28040$34.50

PRORTL-3030 High Intensity LED Lamps

110 Lumens Turns any Incandescent Trouble Light

into a LED Light Top Hang Hook Rotates 360° Allowing Light to Rotate 360*

$17.46

ALERT/PROLIGHT ELECTRICAL PRODUCTS

PROUPL-25G16-3-25’ 13 AMP

Fluorescent TROUBLE LIGHT ON/OFF SWITCH IN HANDLEGrounded Outlet in Handle

360 degree mounted magnet

PRO13RF-30GR16-3-30’ 10 AMP

Fluorescent Trouble LightMetal Housing

ON/OFF Switch in HandleGrounded Outlet in Handle

360 degree mounted magnet and 360 degree adjustable hanging hook

PRO5000-40PL-SS18-2-40’ 13 Watt

Fluorescent Trouble Light, Metal HousingAutomatic Switching FeatureMade for commercial garages

360 degree adjustable hanging hook Compact Size

PRO15RF-4018-2-40’ 15 Watt

Fluorescent Trouble Light ON/OFF Switch in Handle

Metal Housing360 degree mounted magnet and

360 degree adjustable hanging hook

PRO13RPL-4018-2-40’ 13 Watt

Fluorescent Angle HeadTrouble Light, Metal Housing

ON/OFF Switch in Handle 360 degree adjustable

hanging hook

PRO5000A-30G-CB16-3-30’ 10 AMP

Fluorescent Trouble Light ON/OFF Switch in Handle

Outlet in side of Handle 360 degree adjustable hanging hook,

Metal Housing

PRO5000M-30GF-CB3 Outlet Extension Cord Reel

14-3-30’ 13 AmpEpoxy Coated Steel Housing

Power Block with resettable circuit breaker, Metal Housing

PROHR-1518-2-15’

Bright Halogen Direct Beam Light with 90 degree swivel headON/OFF Switch in Handle

PROHC-2018-2-20’ Auto Plug

Bright Halogen Direct Beam Light with 90 degree swivel headON/OFF Switch in Handle

PRO5000-50G-CB18-3-50’ 7 AMP

Fluorescent Trouble LightMetal Housing

ON/OFF Switch in Handle 360 degree adjustable

hanging hook

PROCST-25T12-3-25’ Outside Extension Cord

15 amp Triple Outletwith Resettable Circuit

Breaker

PROCST-50T12-3-50’ Outside Extension Cord

15 amp Triple Outletwith Resettable Circuit

Breaker

PROCST-100T12-3-100’ Outside

Extension Cord15 amp Triple Outlet

with Resettable Circuit Breaker

PRO7000WRPortable Reel Stores up to 100’ of 12-3 cord, 150’ of 16-3 cordMay be mounted on wall with brackets included, suitable for

rope or air hose etc

$18.44 $27.81 $45.27

$55.23$10.26

$24.04

$28.23

$56.18 $51.99 $57.45 $55.90$56.76

$64.06

$28.83 $53.94 $102.61$26.08

PROUPL-50G16-3-50’ 13 AMP

Fluorescent TROUBLE LIGHT ON/OFF SWITCH IN HANDLEGrounded Outlet in Handle

360 degree mounted magnet

$40.80


PRO7080MPowder Coated Steel Reel

with 4 Circuit Breaker Outlets.

Comes with 80’ of 14-3 Cord

$85.40

$17.21

PROHTL-50M-CB14-3-50’ 13 AMP

Heavy DutyMetal Trouble Light

ON/OFF SWITCHGrounded side outlet circuit breaker

PRO15F-2518-2-25’ Fluorescent Work Light

On/Off Switch in HandleHorizontal and Vertical

Plug in ballast

PROTL-25GM-CB16-3-25’ 13 AMP

Metal TROUBLE LIGHTON/OFF SWITCH IN HANDLE

Grounded side outlet circuit breaker

PROHTL-25M-CB14-3-25’ 13 AMP

Heavy DutyMetal Trouble Light

ON/OFF SWITCHGrounded side outlet circuit breaker

50 LED Corded Task Lightwith outletTask Light with 50 High •

Intensity LED Lamps •On/Off Switch •Grounded Outlet Built into •Handle with Power "On" Indicator Light Adjustable/Removable •Magnetic Mount Rotates 180° Folding Hanging Hook •Swivels 360°

PROLET50-15G

$41.47

PRO5000A-30GT-CB

$80.85

50 LED Cord Reel Task Light

Retractable 30 ft. cord reel with rugged powder coated steel reel housing. 50 high intensity LED lamps. On/Off switch built into handle. LED Power on indicator. Adjustable removable magnet clip. Hanging hook rotates 360*. Includes reel hanging hardware.

PRORTL-10S5 Watt LED Screw in Module

110 Lumens Turns any Incandescent Trouble

Light into a LED Light Top Hang Hook Rotates 320° Allowing Light to Rotate 360*

Clam Shell Package

$30.54


5000 LB10” TravelTop Wind

Tube Mount

FX100101$37.19

FX100104$45.27


Bracket Mount

5000 LB10” TravelSide Wind

Tube Mount

5000 LB10” Travel

Side Wind BracketMount


Tube Mount


Bracket Mount

BGJACK$29.95

6 Way Pin Style to 4 Way Flat

Adapter

7 Way Blade Style to 6 Pin

Round Adapter

FLAT MOLDED TRAILER

CONNECTORS4 Wire 12”

M & F

7 CONTACT ROUND40 AMP TRAILERConnector

MITC7F7 CONTACT ROUND

40 AMP TRK COUPLER

$11.76

BGJACK-1$31.00

ES220TRAILER BUDDY 4/5 Pin -

One Man Trailer Wiring Tester: Tests 4 & 5 Pin Flat connec-

tor wiringGreatly reduces time spent

verifying vehicle trailer wiringVery simple & easy to use -

saves time!

$28.51

6 CONTACT ROUND

MALE END

FEMALE END

ROUND PIN

J-5024-WH25’ Four Way Flat Connector Trailer

Harness

WIRING HARNESS

J-5025-WH25’ Five Way Flat

Connector Trailer Harness $12.03

WIRING HARNESS

J-5525-WH35’ Five Way Flat Connector Trailer

Harness

J-5324-WH30’ Four Way Flat Connector Trailer

HarnessWISHBONE WISHBONE

WISHBONEWISHBONE

J-AGM-WH35’ Main Har-

ness w/ 7-Way Ag Plug

Tractor to Imple-ment

$37.00

J-AGW-WHRear Wishbone

Harness20’ Harness For

implement$29.60

FLAT MOLD-ED TRAILER

CONNECTORS4 Wire 48”

M & F

MITC6-4$5.55

MITC7RV-6AUX$7.12

MITC7M$10.88

FX100102$40.83


Tube Mount


Bracket MountFX100103

$46.16

FX100202$47.43

FX100204$54.63

FX100201 $43.29

FX100203$53.61

2000 lb10” TravelTop Wind

Bracket Mount

2000 lb10” TravelTop Wind

Pipe Mount with Wheel

BGDB66” Drop Ball Mount

$22.75MITC6F$10.88

MITC6M$10.36


$13.75


$17.95

$10.64

WIRING HARNESS

$13.14

WIRING HARNESS

$15.82

MIFMT4$2.44

MIFMT448$5.95

MIBHP-4-99-S4 Ga/2 Com-plete Plugs$36.00 pr

MIBHP-2-99-S2 GA/2 Com-plete Plugs $36.00 pr

QUICK START BOOSTER CABLESWITH PLUG ENDS

MIWTLP-416MIWTLP-420

MIWTLP-220

4 Ga. x 16’ with Quick Plug4 Ga. x 20’ with Quick Plug

2 Ga. x 20’ with Quick Plug

110.47 130.66 171.70

PROFESSIONAL BOOSTER CABLES

MIWTL-412MIWTL-416MIWTL-420MIWTL-425

MIWTL-212MIWTL-216MIWTL-220MIWTL-225

MIWTL020TMIWTL025TMIWTL030T

4 Ga. x 12’ with CROC ends4 Ga. x 16’ with CROC ends4 Ga. x 20’ with CROC ends4 Ga. x 25’ with CROC ends

2 Ga. x 12’ with CROC ends2 Ga. x 16’ with CROC ends2 Ga. x 20’ with CROC ends2 Ga. x 25’ with CROC ends

1/0 GA X 20’ With CROC2/0 GA x 25’ With CROC2/0 GA x 30’ With CROC

84.59 107.94 116.66 145.80

109.90 121.57 153.47 180.08

286.21466.20559.49

MIBH700BBLACK CROC

JUMPER CABLE END

$4.75 EA

MIBH700RRED CROC

JUMPER CABLE END

$4.75 EA

Simply Turn One Plug Up-

side Down to Match

Positive to Positive to make the

Set

HARNESS KIT FROM BATTERY TO GRILLE

MISTMH-4 4 GA - 4ft $47.90

MISTMH-2 2 GA - 4ft

$57.80

MIBT444Lead 4 gauge - 2 gauge wire

Card of 10Cars & Pickup

Trucks$19.50 card

MIT444Lead 1 gauge

4/0 gauge wire Card of 10Heavy Duty

Trucks$27.16 card

MIBQD-SQuick Disconnect

TerminalSimply twist the knob and cut off

power $2.95 each

Bench Style LugCrimper

MIBSLC$44.75

STOCK GREYSPECIAL

ORDER BLUE

THESE HAVE GREY PLUGS

3.5 AMP PRO LOGIC BATTERY

MAINTAINER

6 & 12 V Charging1. Multiple Battery 2. Types including deep cycleFully Automatic3. Smart Clamp 4. Technology

ASSOCIATED WHEELED CHARGER 6/12/24 Volt

100/80/50/40 amp1. 400 Crank Assist2. 725A Boost3. 5 Yr warranty4. Automatic timer5. 7” Wheels6. 300 amp cranking assist7. 10’ cord 14-38. 8’ lead9. Weight: 70 lbs10.


ASSOCIATED6/12 VOLT

WHEELED CHARGER100/75 amp•375 Crank Assist•625 amp boost•5 Yr warranty•Automatic timer•10’ cord 14-3 wire•8’ lead•Weight: 58 lbs.•

12 Volt TRUCK PAC

3000 Peak Amps 1. 800 cranking as-2. sist amps54” 4 ga cables3. DC Outlet to power 4. other 12 V acces-sories1 year warranty5. Weight: 38 lbs6.

BATTERY CHARGERS / JUMP STARTERS / INVERTERS

CLES6000$278.41

12/24 Volt TRUCK PAC

3000/750 Peak 1. Amps in 12 V1500/370 Peak 2. Amps in 24V60” 2 ga cables3. DC Outlet to power 4. other 12 V acces-sories1 year warranty5. Weight: 45 lbs6.

CLES1224$422.63

12 Volt JUMP STARTER

2000 Peak 1. Amps 925 cranking 2. assist amps46” 2 ga 3. cablesDC Outlet to 4. power other 12 V accessories1 year warranty5. Weight: 34 lbs6.

CLJNC950$288.98

CLPL2135$59.98

6/12 Volt INTELLIGENT

BATTRY CHARGER MAINTAINER

10/6/2 AMP1. Fully Automatic2. 72” 12 ga cables3. 1 year warranty4. Weight: 4.3 lbs5.

CLPL2310$64.81


BATTRY CHARGER MAINTAINER

20/10/2 AMP1. 20A Fast Charge 2. for larger bat-teriesFully Automatic3. 72” 12 ga 4. cables1 year warranty5. Weight: 4.7 lbs6.

CLPL2320$84.36


WHEELED CHARGER W/ENGINE START

60/40/15/5 amp1. 275 Amp Engine Starting Assistance2. Fully Automatic3. Enhanced Maintance Mode for Long 4. Term Storage72” 12 ga cables5. 2 year warranty6. Weight: 51 lbs7.

CLPL3730$361.53

6/12/24 Volt INTELLIGENT

WHEELED CHARGER W/ENGINE START

60/40/15/5 amp1. 250 Amp Engine Starting Assistance2. Fully Automatic3. Enhanced Maintance Mode for Long 4. Term Storage72” 12 ga cables5. 2 year warranty6. Weight: 54 lbs7.

CLPL3750$468.65

AE6002B$823.47

AE6001A$716.27

1500 Watt Power Inverter3000 Watts Peak3 AC OutletsPower Display

CLPI15000X$274.98

PRO9100HT

$102.15

Heavy-Duty Portable Cord Reel

15 amp Circuit BreakerTubular Steel ConstructionAccepts 15amp or 20amp plugsHolds 100’ of 12/3 or 10/3 cord

PRO7100HD

$88.26

Heavy-Duty Portable Cord Reel

15 amp Circuit BreakerTubular Steel ConstructionAdjustable Clutch Nut for Friction dragHolds 100’ of 12/3

CENTURY WIRE AND CABLE EXTENSION CORDS

CEND19912025CEND19912050CEND19912100CEND10914004

12/312/312/314/3

25’50’100’2’

ORANGEORANGEORANGEASSORTED

22.39 42.01 81.22 6.29

CLJNC241 ChargerCLJNC080 Replacement Battery

$19.50$154.50

CLESA217 ChargerCLES1240 Replacement Battery

$18.50$199.95

TRACTOR AND TRAILER LIGHTING


HIDHIGH DENSITY DISCHARGE

3000-5000 Hr Bulb Life3 Amp Draw / 12 Volt 35 Watt

Available in Flood, Spot, & Trapezoidal Lens

LEDLIGHT EMITING DIODE

30,000 - 50,000 Hr Diode Life3 Amp Draw / 12 Volt 60 WattAvailable in Flood or Spot Lens

HALOGENH3 Halogen Bulb 55 Watt

500 Hr. Bulb Life6 amp Draw / 12 Volt 55 Watt

Available in Flood, Spot, & Trapezoidal Lens

JPL-512JPL-712JPL845JPL-732

3200320040003100/6200

PART # LUMINS3” X 3”4.5” X 4.5”3” x 3”5.25” x 3.4”

LENS SIZEHIDHIDHIDHID

TYPEFloodFloodFloodFlood/Flood

TYPE

J14610J14603-FJ14603-SJ14110J14630-FJ14630-SJ14660-FJ14660-S

4800100010005002000200040004000

5.25” X 3.5”4.125” ROUND4.125” ROUND2” X 2”

LEDLEDLEDLEDLED LEDLEDLED

FloodFloodSpotFlood/Spot TrapFloodSpotFloodSpot

COST

294.9549.9549.9569.9572.5072.50

179.95179.95

35 watt-12V35 watt-12V45 watt-12VDual 35 watt

BULB

6- 10 Watt Dio6- 3 Watt Diod6- 3 Watt Diod1- 10 Watt10-3 Watt10-3 Watt6-10 Watt6-10 Watt

J14300 4 1/2”ROUNDHALOGEN Trapezoid 55 Watt

STOP - TAIL - TURN LIGHTS

J-4512-AJ-4512-CJ-4512-R

4” ROUND4” ROUND4” ROUND

PART # SIZELEDLEDLED

TYPE121212

BULBAMBERCLEARRED

LENS COSTJ-60-WHJ-60-WHJ-60-WH

PIGTAILJ-40-GMJ-40-GMJ-40-GM

GROMMET

J-66-AJ-66-CJ-66-R

6” OVAL6” OVAL6” OVAL

LEDLEDLED

10 10 10

AMBERCLEARRED

J-60-WHJ-60-WHJ-60-WH

J-60-GMJ-60-GMJ-60-GM

Universal 2 StudIncandescent Light Kit with 25’

Harness 5 Way Plug

Submersible LED Combination Lamp Kit for OVER 80" Trailers - Fully potted circuitry with gasketed lenses and housing. 10 Diode configu-ration each lamp.Includes:

Right and Left Lamps • (2) • 2-1/4 x 1-1/4” Clearance Lights • 25’ 4 Way with Harness Bracket•

Wiring: Self Grounding with 14" blunt cut lead wires Mount: 2 Bolts on 2" centersLens Color: Red

J20445KCD$43.75

Submersible LED Combination Lamp Kit for UNDER 80" Trailers - Fully potted circuitry with gasketed lenses and housing. 10 Diode configuration each lamp.Includes:

Right and Left Lamps • (2) • 2-1/4 x 1-1/4” Clearance Lights • 25’ 4 Way with HarnessBracket•

Wiring: Self Grounding with 14" blunt cut lead wires Mount: 2 Bolts on 2" centersLens Color: Red

J24245KC$44.10

10.95

$99.95 99.95 199.95 329.95

$17.85 17.85 17.85

$13.25 13.25 13.25

JPL-732

JPL-512

J14610

F14603F

J-4512-A

J-66-A

J-40-GM4” Round Grommet

$0.70 ea

J-60-GM6” Oval Grommet

$0.70 ea

J-60-WH9” 3 Wire Harness

for J-40 & J-60

Lights$0.80

ea

GROMMETTS (RINGS) FOR ABOVE

J2024KCD$24.15

PRICED

BELOW

PRICED

BELOW

STOP - TAIL - TURN OR MARKER

Styleside LED Lightbar with 11 Diode Configuration.

15-1/2" L, 1-5/8" H, 3/4" D

CHOICE$22.60

RANGE400X200400X200600X260400/400

JPL-612FJPL-612-SJPL645-SJPL-645-F

3200320040004000

4-3/4” X 2-7/84-3/4’ X 2-7/84-3/4” X 2-7/84-3/4 X 2-7/8

HIDHIDHIDHID

FloodSpotSpotFlood

35 watt-12V35 watt-12V45 watt-12V45 watt-12V

$129.95 129.95 169.95 169.95

800X90800X901100X90600X200

JPL-612JPL-645

J-535-RJ-535-CJ-535-RC

REDCLEARCLEAR

CLEARCLEARRED

BULBPART # LENS

LED Lighting Kit for Over 80" Wide Boat Trailers. 6-1/8" x 3-5/8" size submersible tail lights have marine grade tinned wire, triple sealed electronics and 8" pre-attached leads for use on regular and marine trailers. Curbside (right) lamp has 18 Diodes. Streetside (left) light has 24 diodes, including license lamp diodes. Fits Karavan, ShoreLand'r, Continental and similar Dry Launch Style lamp applications with 2-Bolt industry standard mounting for easy replace-ment or upgrade. Included lighting meets all DOT/SAE standards.

J-72-KC$54.51

J14110 Includes: Flood, Spot, & Trapazoid LensJ14630

J14660

J-755-AALED Dual Face Pedestal

Lamp Amber/Amber Warning Light

$32.65

J-755-RBLED Single Face Pedestal Lamp. Stop / Tail/ TurnModel. Red Lens - Black

Back

$17.35


J-PGT-7Y150’ X 2” Roll 10 year

Premium Grade Conspicuity Tape 7” White/ 11” Red

$106.06

CLEARANCE / MARKER LIGHTS

J-25-AJ-25-R

2-1/2” ROUND2-1/2” ROUND

PART # SIZELEDLED

TYPE44

BULBAMBERRED

LENS COSTJ-10-WHJ-10-WH

PIGTAILJ-20-GMJ-20-GM

GROMMET

J-15-AJ-15-R

2” ROUND2” ROUND

LEDLED

44

AMBERRED

J-10-WHJ-10-WH

J-10-GMJ-10-GM

$4.24 $4.24

$4.01 $4.01

PRICED

BELOW

J-325-AJ-325-CJ-325-R

4” X 2”4” X 2”4” X 2”

LEDLEDLED

6 DIODE SNAPOFF BULLS-EYE

AMBERCLEARRED

ATTACHED6” LEAD

SELF CONTAINED

$8.12 $8.12 $8.12

PRICED

BELOW

J-55-AJ-55-RJ-55-CJ-55-BCJ-55-GC

3/4”3/4”3/4”3/4”3/4”

LEDLEDLEDLEDLED

Single DiodeMarker Lamp

AMBERREDCLEARBLUEGREEN

ATTACHED6” LEAD

SELF CONTAINED

$4.68 $4.68 $4.68 $4.68 $4.68

J-755-ARLED Dual Face Pedestal

Lamp Amber/Red lens Stop / Tail / Turn Model.

$32.65

TRAILER TAPE

J-20-GM2-1/2” Round Grommet

$0.72 ea

J-10-WH6” 2 Wire Harness

for J-15 & J-25 Lights$0.50 ea

GROMMETTS (RINGS) FOR ABOVE

J-BRTK $31.17

Trailer Breakaway System

with 5 AH battery, charger, plastic clamshell battery box,

and breakaway switch.Mount: Bolt on

J-BBKL $31.17

Trailer Breakaway System with 5 AH battery, black powder

coated mounting plate, removable plastic battery box, and breakaway

switch. LED Test ButtonMount: Bolt or Weld

J-515-AJ-515-RJ-515-ACJ-515-RC

2.5” oval2.5” oval2.5” oval2.5” oval

2 Diode2 Diode2 Diode2 Diode

AMBERREDCLEAR/AMBERCLEAR/RED

ATTACHED6” LEAD

SELF CONTAINED

$2.99 2.99 2.99 2.99

J-485-AJ-485-R

4” x 2”4” x 2”

LEDLED

2 Diode2 Diode

AMBERRED

ATTACHED6” LEAD

SELF CONTAINED

$4.39 4.39

LEDLEDLEDLED

Colored Bulb-Clear

Lens

BLUE Bulb-Clear LensGREEN Bulb-Clear Lens

Includes: J-AC2-L4, J-AC2-R4, J-AMG-WH, J-AGW-WH4, and J-AEM-48

LED 4-Wire AG Lighting Kit

J-AC2-WH4K 4-Wire Packard

$217.39

J-AC2-WH3K 3-Wire Packard

$169.28J-AMK Optional Magnets for Above Kits Include: 4 Magnets $18.41

J-10-GM2” Round Grommet

$0.52 ea


Ratchet Style Binderthat installs in half the time and stores in half the space----3

Position Pawl for choice of ratchet extension, ratchet take-up, or a “free-spin” setting for fast adjustment in either direction

SCCH5125-0858

3/8” Transport1/2”High Test12000 Lb WLL

61.90

BGCP8000X8000 LB ( 4 ton) DOUBLE

GEAR 3 HOOK$44.95

SCCH3226-5220S7 Chain Assembly w/Clevis

Grab Hooks5/16” x 20’

4700 lb working limit$ 52.46


Grab Hooks 3/8” x 20’6600 lb working limit

$68.72

SCCH3226-6220S7 Chain Assembly

w/Clevis Grab Hooks 1/2” x 20’11,300 lb working limit

$ 136.92


Grab Hooks3/8” x 16’

6600 lb working limit$ 56.20

DOT APPROVED

DOT APPROVED

BGCP12004000 LB( 2 ton) SINGLE GEAR Come Along

$16.95

SCCH5125-0658

5/16” Transport3/8”High Test5400 Lb WLL

$51.70

SCCH5123-4152Fits 3/8” High Test & 5/16”

Transport Chain

5,400 Load Limit

DOT Approved

$40.25

SCCH5123-4052

Fits 1/4” High Test & 5/16”

Transport Chain3,900 Load

LimitDOT Approved

$27.97

SCCH5123-4252

Fits 1/2” High Test &

3/8” Transport Chain

9,200 Load Limit

DOT Approved

$44.46

RATCHETING

RATCHETING

RATCHETING

SCCH5023-4052


Transport Chain

2,600 Load Limit

DOT Approved

$19.18

LEVER

SCCH5023-4152


Transport Chain

5,400 Load Limit

DOT Approved

$28.04

LEVERSCCH5023-4252

Fits 1/2” High Test & 3/8” Transport

Chain9,200 Load

LimitDOT Approved

$43.14

LEVER

BGCP80008000 LB ( 4 ton)

DOUBLE GEAR 3 HOOK ALLIED

Come Along$101.16

SCCH5250-4152Fits 3/8” High Test & 5/16”

Transport Chain5,400 Load Limit

DOT Approved

$44.56

NEW SAFETY RELEASE LEVER BINDER

Part number

SCCH7826-0520SCCH7826-0620SCCH7826-0820

Size

5/163/81/2

Work Load (lbs.)5,4007,500

12,500

Price

$6.25$7.93

$17.46

Part number

SCCH7726-0520SCC H7726-0620SCC H7726-0820

Size

5/163/81/2

Work Load(lbs.) 4,3005,2509,000

Price

$7.96$11.45$23.64

SYS70 Clevis Grab Hooks

SYS70 Clevis Slip Hooks With Latch

Clevis Slip HooksPart numberBGCSH516BGCSH38BGCSH12

Size 5/163/81/2

Work Load (lbs.) 4,3005,2509,000

Price$3.49$4.83$10.16

Part numberBGCGH516BGCGH38BGCGH12

Size 5/163/81/2

Work Load (lbs.)5,4007,500

12,500

Price$2.50$3.25$6.80

Clevis Grab Hooks

CALL FOR QUANITY PRICING OR BULK CHAIN PRICES

CAR TRAILER TIE DOWNS / TRACTOR

QUANITY QUOTES OR SPECIAL ORDERS AVAILABLE

AXLE STRAPS

2” X 8’ 5000 LB Ratchet Tie Down with Snap Hook on Both Ends.

Use With Axle straps over Axle Then you don’t have to replace the expensive ratchet strap

each time you cut the axle strap.

USA REPLACEMENT WEBBING WITH FLAT HOOK (NO RATCHET)

2” WEBBING WIDE HANDLE RATCHET TIE DOWN WITH DOUBLE WIRE “J” HOOKS

TRUCK TRAILER WEBBING AND BOLT ON--WELD ON WINCHES

TRAILER AND TRUCK RATCHET TIE DOWNS

WEBBING WITH FLAT HOOK (NO RATCHET)

Winch Sold Below

SAFH4X274” X 27’ Webbing with Flat Hook

15000 LB Break

$14.95


15000 LB Break

$17.50SAFH4X27-2$28.00 PAIR

SAFH4X30-2$34.00 PAIR


15000 LB Break$15.75


15000 LB Break$19.95



SAFH2X27F 27’ yellow 10,000 lb BreakSAFH2X32F 32’ blue 10,000 lb Break

$9.95$12.16

USA REPLACEMENT WEBBING WITH “J” HOOK (NO RATCHET)

SAFH2X27J 27’ yellow 10,000 lb BreakSAFH2X32J 32’ blue 10,000 lb Break

$9.95$12.16

Wide HANDLE RATCHET TIE DOWN WITH CHAIN AND GRAB HOOKS


SA10X27CG2” X 27’ 10,000 LB

BREAK$34.91 each

SA10X27CG-2Two for $68.08

2” WEBBING WIDE HANDLE RATCHETTIE DOWN WITH FLAT HOOKS

CARFH10R272” X 27’$15.14

CARFH10R27-2

$29.00PAIR

CARFH10R32 Blue/Orange

2” X 32’$25.81

CARFH10R32-2

$49.00 PAIR

CARJH10R272” X 27’$13.95

CARJH10R27-2$26.00 PAIR

CARJH10R322” X 32’$26.16

CARJH10R32-2$50.00 PAIR

SA16P4” Portable Winch (weld on or bolt on)

$18.90 EA

ATV / SMALL RATCHET STRAPS

CAR520J2” x 20’ 5,000 lb. Heavy Duty

Ratchet Tie Down (Blue in Color)

$12.69

CAR315S1” x 15’ 1,500 lb. Heavy Duty Ratchet Tie Down

(Blue in Color)$8.49

CAR315S-2USA WEB 1” X 15’ 1500LB

HD Ratchet Tie Down Two for $16.00

CAR520J-2USA WEB 2” X 20’ 5000LB

HD Ratchet Tie Down Two for $24.00

21” 5000 LB Rated Axle Strap w/ HD D-Rings

SAAX-21 $7.26

31” 5000 LB Rated Strap w/

HD D-RingsSAAX31 $7.95 ea

8’ CAR TIE DOWNS

SAX8SP$24.06

50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS 50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS50 YDS

ME380060ME380080ME380100ME380120ME380150ME380180ME380220ME380240ME380320ME380400ME381060ME381080ME381100ME381120ME381150ME381180ME381220ME381240ME381320ME381400ME382040ME382050ME382060ME382080ME382100ME382120ME382150ME382180ME382220ME382240ME382320ME382400

$16.28$15.59 $15.16$15.16 $15.16$15.16 $15.16 $15.16 $15.16 $15.16$21.98$20.76$20.18$20.18$20.18$20.18$20.18$20.18$20.18$20.18$32.56$30.71$28.42$26.27$24.52$24.52$24.52$24.52$24.52$24.52$24.52$24.52

6080

1001201501802202403204006080

10012015018022024032040040506080

100120150180220240320400

1”1”1”1”1”1”1”1”1”1”

1-1/2” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 1-1/2”

2”2”2”2”2”2”2”2”2”2”2”2”

EMORY CLOTH ROLLS

$24.83$17.22 $15.12 $45.24 $36.96 $32.32

80GR 120GR150GR180GR240GR320GR80GR

120GR180GR

PAE1-80PAE1-120PAE1-150PAE1-180PAE1-240PAE1-320PAE2-80PAE2-120 PAE2-180

$25.11$26.11$26.11$26.11$26.11$26.11$35.11$35.28$35.28

1” X 50 YD1” X 50 YD1” X 50 YD1” X 50 YD1” X 50 YD1” X 50 YD

1-1/2” X 50 YD1-1/2” X 50 YD1-1/2” X 50 YD

PART # SIZE GRIT COSTFLEXIBLE CLEANING & DEBURRING METAL

EMORY CLOTH

NYLON TIES ARE HEREMINT4 4” Plain White 18 Lb 100 PkMINT4K 4” Plain White 18 Lb 1000 PkMINT4-50 4” Plain Black 18 Lb 100 PkMINT4-50K 4” Plain Black 18 Lb 1000 Pk

MINT7 7-8” Plain White 50 Lb 100 PkMINT7K 7-8” Plain White 50 Lb 1000 PkMINT7-50 7-8” Plain Black 50 Lb 100 PkMINT7-50K 7-8” Plain Black 50 Lb 1000 Pk

MINT11 11” Plain White 50 Lb 100 PkMINT11K 11” Plain White 50 Lb 1000 PkMINT11-50 11” Plain Black 50 Lb 100 PkMINT11-50K 11” Plain Black 50 Lb 1000 Pk

MINT14 14” Plain White 50 Lb 100 PkMINT14W 14” Plain White 120 Lb 100 PkMINT14K 14” Plain White 50 Lb 1000 PkMINT14-50 14” Plain Black 50 Lb 100 PkMINT14W-5014 Plain Black 120 Lb 100 PkMINT14-50K 14” Plain Black 50 Lb 1000Pk

MINT21W 21” Plain White 175 Lb 100 PkMINT21W-50 21” Plain Black 175 Lb 100 PkMINT30W 30” Plain White 175 Lb 100 PkMINT30W-50 30” Plain Black 175 Lb 100 Pk

PART SIZE END COLOR TENSIL PACKED COST

$0.99 pk $ 8.95pk $1.09 pk $9.95 pk

$3.25 pk $27.25 pk $3.50 pk $32.95 pk

$5.70 pk $49.95 pk $6.25 pk $56.95 pk

MK82750125’ of 7/16” Rubber Rope to cut any length

No Hooks

$159.69

MK8370-0100 Hooks

$40.95

Resist Sunlight-Oxidation-Heat & Cold. Stretches 1-1/2 times length

CHEAPER TARP STRAPS

BGTS-15 15”BGTS-21 21”BGTS-31 31” BGTS-41 41”

.77 1.00 1.21 1.49

NYLON STRETCH CORDS (BUNJI)

BGES-12 12”BGES-18 18”BGES-24 24”BGES-36 36”BGES-48 48”BGES-72 72”

.64

.74

.84

.99 1.19 2.20

USA MADE TARP STRAPS & ROPE

PROFLEX NEON POLY TARP STRAPS GUARANTEED TO RETURN TO ORIGINAL SIZE

COLOR CHOICES:BLACK •BLUE•RED •YELLOW•

$6.50 pk $11.95 pk $59.95 pk $7.95 pk $13.95 pk $65.95 pk

$30.95 pk $32.95 pk $31.95 pk $35.95 pk


SAITSCREEN ROLLS LONG LIFE

PART # LGTH GRIT WITH EACH

1-1/2”1-1/2”1-1/2”1-1/2”1-1/2”1-1/2”

10 YDS10 YDS10 YDS25 YDS25 YDS25 YDS

UA84090UA84093UA84096UA84091UA84094UA84097

8012018080120180

PAS1-80 1 X 25 YD 80 GR PAS1-100 1 X 25 YD 100 GR PAS1-120 1 X 25 YD 120 GRPAS1-180 1 X 25 YD 180 GRPAS1-320 1 X 25 YD 320 GR PAS2-80 1-1/2 X 25 YD 80 GRPAS2-100 1-1/2 X 25 YD 100 GRPAS2-120 1-1/2 X 25 YD 120 GRPAS2-180 1-1/2 X 25 YD 180 GRSA

ND

SCR

EEN $27.03

$26.03$26.03$26.03$26.03

$35.02$33.02$33.02$33.02

PART # SIZE GRIT COSTSAND SCREEN

SIC OPEN MESH FOR CLEANING,

DEBURRING, DESCALING

AND DRYWALLAPPLICATIONS

PF12FPF18FPF24FPF36F

12” Flat18” Flat24” Flat36” Flat

$5.57$7.08$8.25$9.83

MK8519-0MK8524-0

10 PK10 PK

$23.50$29.60

8mm x 50’ Bunji Roll

PR53945$9.95 RollColors Available

Yellow-Blue-Red-Green

PR59812-CD2 PK HOOKS$0.99 (2 pk)

STRAP

1”, 1-1/2” - 2” WIDE MERCER ALUMINUM-OXIDE CLOTH

SHOP ROLLS

PART # WIDTH LGTH GRIT EACH

SHOP ROLLS

$33.76$39.31$20.07$26.83$30.95$63.14$88.52$21.78$40.67

2 PLY 2x102 PLY 2x122 PLY 2X32 PLY 2x62 PLY 2x82 PLY 2x202 PLY 4x161 PLY 2x81 PLY 4x6

VERTICAL CHOKER BASKETNYLON SLINGS

NYLON TOW ROPES3/4”

1”1”

1-1/4”1-1/4”1-1/2”

2”2-1/2”

3”

20 FT20 FT30FT. 20 FT30 FT25 FT30 FT25 FT25 FT

14200250002500037500 375005300092000140,000200,000

T2420T3220T3230T4020T4030T4825

N/AN/AN/A

$61.89$135.63$167.29$208.11$237.91$316.32

---------

T2420ET3220ET323OET4020ET4030ET4825ET6430ET8025ET9625E

$46.56$81.84

$124.39$125.00$167.81$195.15$413.66$541.33$771.57

$54.24$108.74

---$166.57

------------

SIZE CUT LENGTH BREAK W/HOOKS PRICE W/LOOPS PRICE HOOK & LOOP PRICE

Other Lengths Available Call For Quote800-821-2932

NYLON TOW STRAPS

2”3”4”6”

20FT25FT30 FT 30 FT

20,00030,00040,000 54,000

SCC2001---------

$36.32---------

SCC2002SCC2004SCC2005S19230E

$32.21$56.13$93.33

$222.78

SIZE CUT LENGTH

BREAK W/HOOKS

PRICE W/LOOPS PRICE

Part NumberSCC8058105SCC8058205SCC8058305SCC8058405SCC8059205SCC8058505SCC8058605

Size3/16”1/4”

5/16”3/8”

7/16”1/2”5/8”

SCREW PIN SHACKLES

7/8” X 19’ Finished Length Tow Rope 1 Hook and 1 Loop in Car-ring Case 18,900 Breaking Strength

$86.77

Buzzard Gulch Inc. 800-821-2932 Catalog T Page # 83

EE2-102x10EE2-102x12EE2-102X3EE2-102x6EE2-102x8EE2-102x20EE2-104x16EE1-102x8EE1-104x6

T2420HET3220HE----T4020HE------------

ALLT2819HE-F

Pin Diameter1/4”

5/16”3/8”

7/16”1/2”5/8”3/4”

Holds.33 TON.5 TON.75 TON1 TON1.5 TON2 TON3.25 TON

Price$1.03$1.14$1.41$2.14$2.48$3.34$6.30

SCC8058705SCC8058805SCC8058905SCC8058005SCC8059005SCC8059105

3/4”7/8”

1”1-1/8”1-1/4”1-1/2”

7/8”1”

1-1/8”1-1/4”1-3/8”1-5/8”

4.75 TON6.5 TON8.5 TON9.5 TON12 TON17 TON

$9.37$14.15$19.67$29.82$40.52$75.99

640064006400640064006400

1150032006400

500050005000500050005000920025005000

128001280012800128001280012800230006400

12800

25% Stronger Than Grade 2

110 Pc. Wire Nut Assortment Kit

10 Gauge to 22 gauge

MIIBCR22-16 GARED100 PK

MIIBCB16-14 GABLUE100 PK

MIIBCY10-12 GAYELLOW

100 PK

$6.95PACK

$6.95PACK

$10.95

PACK

VINYL BUTT CONNECTORS HEAT SHRINK BUTT CONNECTORS

$6.50 PACK

$6.50 PACK

$10.95PACK

TAP IN CONNECTOR(Insert Hot Line and

close)

PI1560PK of 50 fold over

connectors

175 Pc. Vinyl Terminal Assortment

(16 sizes)360 Pc. Vinyl Terminal Assortment (18 sizes)

40 Pc. Heat Shrink Butt Terminal Assortment

(3 sizes)

150 Pc. Vinyl Butt Terminal Assortment

(3 sizes)


MITP400USA MADE

HEAVY DUTY TERMINAL

PLIERS

$17.50

PI0380TRatchet

Crimping ToolCrimps

22-18, 16-14 & 12-10 gauge

terminals in 3 separate

crimping nests. Makes perfect crimps each

time

PI0390TSelf

Adjusting Wire Stripper.

Cuts and strips 26-10

AWG wire and crimps

insulated and uninsulated terminals

$23.95

14.95

MISBCR22-16 GARED25 PK

MISBCB16-14 GABLUE25 PK

MISBCY10-12 GAYELOW

25 PK

$6.95 PACK

MITK175$10.95

MITK360$19.95

MITKB150$39.95

MI002HS$19.95

MIWNA110$10.50

BENT HITCH

PIN ZINC PLATED

CHOICE$1.95

1/2” X 3” 5/8” X 3”

FXP70924 -10 FXP70925 -10 FXP70927 -10

1/8” X 2” For 1/2-3/4” 5/32 X 3” For 5/8” - 1” 3/16” X 3-3/4 For 7/8” to 1-1/4”

$0.32 $2.88 $0.40 $3.60

LYNCH PIN

ZINCPLATED

FXP70938 -10 FXP70940 -10

1/4” x 1-3/4” PACK OF 10 5/16 x 2-1/4 PACK OF 10

$0.86 $7.75 $0.76 $6.85

PTO LOCKING PINS - ROUND LOOP

FXP700532FXP700542FXP700552 FXP700553FXP700562FXP700572FXP700573FXP700582FXP700583

3/4” X 6-1/2” 9-1/2”7/8” X 6-1/2” 9-1/2”1” X 7-1/2” 10” 1” x 12” 15”1-1/8” X 8-1/2” 11-1/2”1-1/4” X 8-1/2” 11-1/2”1-1/4” X 12” 15”1-1/2” X 8-1/2” 11-1/2”1-1/2” X 13” 15”

FXP700832 FXP700842 FXP700852 FXP700862 FXP700872 FXP700882

$7.28$8.92$12.82$14.90$20.22$27.20

5.126.508.4614.4612.2414.5822.2222.0032.22

FXP70901 -10 FXP7094 -10

FXP71111 FXP71112

GRADE 5 FORGED RED HEAD HITCH PIN

7/16” X 2” PACK OF 10 1/4” X 2-1/8 PACK OF 10

$0.12 Ea10 for $1.10 $0.20 Ea 10 for $1.85 $0.34 Ea 10 for $3.15

GRADE 8 FORGED BLUE HEAD HITCH PINS

FXP700432 FXP700442 FXP700452 FXP700462 FXP700472 FXP700492

3/4” X 6” 7/8” X 6” 1” X 6” 1-1/8” X 7” 1-1/4” X 7 1-1/2” X 8”

19.8022.3625.8630.5632.9235.26

SPEECO DOUBLE LOCKING GRADE 5

HITCH PIN

PART # FXP71032C FXP71042C FXP71052C

SIZE OVERALL3/4” X 6-1/4” 7-3/4” 7/8” X 6-1/4” 7-3/4” 1” X 6-1/4” 7-3/4”

COST $3.64$4.66$5.50

SWIVEL HANDLE FORGED

HITCH PINS

FXS160871 FXS160872 FXS160874

BLACK VINYL COATED KNOB WITH CHROME PLATED BASERED VINYL COATED KNOB WITH CHROME PLATED BASEGREEN VINYL COATED KNOB WITH CHROME PLATED BASE

$9.18$9.18$9.18

STEERING WHEEL SPINNERS

FITS MOST TRACTORS AND TRUCKS

TRACTOR DRAWBAR GRAB HOOK

FOR ALL DRAWBARS UP TO 1-5/8” THICK. USE 5/16” TO 1/2” CHAIN

FX490516 $14.90 BGHB100608

2” TRAILER BALLCHOME WITH 1” BOLT X 2-1/8” LONG

$10.88

BGHB100705 2-5/16” TRAILER

BALLCHOME WITH 1-3/8” BOLT X 2-31/64” LONG

$21.08

3/4” X 6-1/2” 9-1/2”7/8”X 6-1/2” 9-1/2”1” X 7-1/2” 10”1-1/8”X 8-1/2” 10”1-1/4”X 8-1/2” 11-1/2”1-1/2”X 8-1/2” 11-1/2”

SizeUsable Length

Overall Length

Size Usable Length Overall Length

MIATCF4040 Pc. ATC Flat Style Fuses (7

sizes)

$9.99

MIAGCF6060 Pc. AGCF Round

Old Style Fuses (6 sizes)

$14.89

MIATFUSE120 Pc. ATC Flat

Style Fuses (6 sizes)

$6.95

JESTS99SELF TAPPING SCREW

ASSORTMENT400 Pc. 11 sizes

$34.60

JESA99460 Pc. SHOP ASSORTMENT

6 Sizes Woodruff keys, 6 sizes roll pins, 4 sizes Snap

Rings, 2 sizes “E” Clips

$45.99

JEAS99200 Pc. ALLEN

HEAD SET SCREW ASSORTMENT

12 sizes

$36.85

JEAHS99106 Pc. ALLEN HEAD SOCKET CAP SCREW

ASSORTMENT

$41.75

JEEC99300 Pc. E-Clip Assortment

9 Sizes

$34.26


BG555555 Pc. Cotter Pin

Assortment1/16” to 5/32”

$6.95

MAU51665 Pc. Cotter Pin

Assortment5/32” To 5/16”

$13.88

BG150150 Pc. Hitch Pin Clip


$6.95

MAU52048 Pc. Hitch Pin Clip

Assortment1/8” TO 3/8” (even bigger)

$13.88

BG315315 Pc. Roll Pin


$12.95

MAU53190 Pc. Roll Pin

Assortment1/8” TO 3/8”

$19.74

BG300300 Pc.

External / Internal Snap Ring Assortment1/8” to 1-1/4”

$7.95

BG225225 Pc. Internal Snap

Ring Assortment7/16” to 1-1/4”

$6.95

PI0001N44 Pc. Nylon

Clamp Kit9 different sizes

$6.95

PI0003RC51 Pc Rubber

Clamp Set6 sizes 1/4” ID to 1” ID

$21.37

MIZA100100 Pc Zerk Assortment7 different sizes / styles

$18.50

MIZAM100100 Pc Metric Zerk

Assortment9 different sizes / styles

$18.50

BG407407 Pc. SAE

O-Ring Assortment1/8”-2”

$12.99

BGZA100110 Pc Zerk Assortment6 different sizes / styles

$14.95

BG10001000 PC. Rivit Kit

Most Popular Sizes

$14.95

BGCP6060 PC. Clevis Pins

$10.95

BG419MM419 Pc. Metric

O-Ring Assortment

$15.41

BGZA100MM110 Pc Zerk Assortment

6 metric sizes / styles

$13.95

MIZ400A100 PC. OF 1/4 - 28

STRAIGHT ZERK

$11.77 BXMIZ800-A

100 PC. OF 1/8 P.T. STRAIGHT ZERK

$14.05 BX

MIATCMF4040 Pc Mini

Fuse Assort-ment

$14.39

BGATFMINI100 Pc Mini Fuse Assort-

ment

5.95

L568104 PC Relay Test

Jumper KitRed- Blue-Yellow-Green

$64.53

BGHC3434 Pc. Hose Clamp

Assortment1-1/16” to 2-3/4”

$7.75

ESC10106Dual Tractor Tire Bead

Breaker* Heavy Duty - 10 Tons of

force to break the tough-est beads

* Breaks inside bead on outside dual

* Requires just 3” opening space* Use with 10,000 psi air/

hydraulic pump* No need to remove

outside wheel to change tire on outside dual

$539.50

tractor tIrE cHaNGING EQUIPMENt

ESC10101“Combi”

Bead Breaker (needs pump and hoses)

* For all agriculture, construction and trucks

* Works on Single, 2 Pc. and 3 Pc. rims

* Operates off any 10,000 psi air/hydraulic pump

* Breaks the toughest tire beads in seconds (inside & outside)

* No screws, bolting or attach-ments. Simply hold to rim and activate pump

* Will not damage tire* Lightweight but rugged construc-

tion

$760.27

ESC10592* Air Hydraulic Pump * 5 Qt Oil Capacity* Rugged Metal * Reservoir* Air Inlet Filter* All Metal Air Motor

$520.87

Save$79.95 ESC10202Bead Breaker Complete Kit

Set of 10101 and 10592 with the hose to connect

together

$1210.52


AIR/HYDRAULICBEAD BREAKER

AIR/HYDRAULICBEAD BREAKER

ACCESSORY

CHEETAH BEAD SEATING TOOL

5 Gallon*This portable unit easily seats the toughest beads from ATV to large 24.5 truck tires.*6 gallon ASME approved tank made of steel*Gauge on tank measures available air 160 lb relief valve.Weight: 28 lbsTSI-CH-5

$232.50TSI-CH13AL

$613.50


13 Gallon AlunimumThis portable unit easily

seats the toughest beads from 24” TO 54”

Tractor and heavy equipment tires

Gauge on tank measures available air 160 lb relief valve.

Aluminum tank makes this larger one 50% lighter

Weight 32 lbs


5 GallonSame as the CH-5 above

except Alunimum Tank

Weight: 18 lbs.

TSI-CH-5AL$291.00


10 GallonASME certified tank will seat the bead on all trucks and small tractor tires. A 2” tank openining allows use of the Optional Mag-num II barrel giving added “spread” of the discharge. This extends tghe power of the CH-10 for seating even the mot difficult beads on

larger wheels. 42 lbs.TSI-CH-10$291.00

CHEETAH BEAD SEAT-ING TOOL

Same as the CH-10 above except Aluni-mum Tank

Weight: 28 lbs.

TSI-CH-10AL$387.00

The Cheetah® Magnum I Barrel is designed to in-crease the impact power of the CH-5 Cheetah® Bead Seater by 2 to 3 times over the standard barrel. The Cheetah® Magnum I Bar spreads the air discharge over a larger area to provide optimum air dispersion. The Cheetah® Magnum I Barrel is easy to install and installs in only minutes

TSI-02.106$115.00

5 GALLON STEELBEAD SEATING TANK

*This portable unit easily seats the toughest beads from ATV to large 24.5 truck tires.*6 gallon ASME approved tank made of steel*Gauge on tank *Ball Valve instead of cheaper onemeasures available air 160 lb relief valve.Weight: 28 lbs

ENT-5$129.95

Esco Yellow Jacket Hydraulic Bead Breaker Kit breaks even tough beads in seconds with 10,000 lbs. of force. Typical Application: Single, two, three-piece truck tires and rims, Max. PSI: 10,000, Length (in.): 3.75.

Works on single, two- or three-piece truck tires and rims, including some new style wheels

Hydraulically clamps on wheel Pump operates on air pressure of 80—125 PSI 3.75 stroke Includes bead breaker, pump and hose with coupler

ESC10821$572.01

Gaither Tools GAIBB6L Bead Bazooka BeadSeater

Gaither s Bead Bazooka combines the most powerful Automatic Rapid Air Release System and

easiest-to-handle tank for seating tubeless tire beads. Simply fill the tank and FIRE! The instantaneous blast of air from the 6 Liter tank

will work on truck (including super singles) passenger motorcycle ATV and small AG tires. Most powerful release mechanism on any bead-seating tool. Half the weight of

other bead-seating tools - only 14 lbs.!. Push-button trigger allows users to keep both hands on the tank for more control. Fits in the side box of tire service trucks for

protection from damage and theft. CE and TUV certification.

9 Liter is for larger tires when you need more air.

GAIBB6L6 LITER BAZOOKA

$278.95

GAIBB9L9 LITER BAZOOKA

$359.95

GAIBBH-01BAZOOKA STAND

$97.07Allows technicians to store the Bead Bazooka near the working area without leaving it on the floor.Allows technicians to fill the tank while in the holster and offers a direct view of the pressure gauge.Protects toos from dropping , being kicked, broken components, etc.

ken tool - ken tool - ken tool - ken tool - ken toolKEN33220

(T20A)30” Curved Tire Spoon

11/16” x 30”

$32.95

KEN32120(T20)

24” Curved Tire Spoon

11/16” x 24”

$29.56

KEN32121(T21R)

18” Drop Cen-ter Tire Iron

11/16” x 18”

$23.85

KEN33219(T19A)

30” Straight Tire Spoon

11/16” x 30”

$32.95

KEN32119(T19)

24” Straight Tire Spoon

11/16” x 24”

$29.56

KEN33238(T38)

30” Straight Tire Spoon7/8” x 30”

$44.25

KEN32123(T23)

24” Lock Ring Tool

11/16” x 24”

$30.06

KEN33223(T23A)

30” Lock Ring Tool

11/16” x 30”

$32.11

KEN32125(T25)

5 Degree Rim Lock Tool

11/16” x 18”

$28.99

KEN34647(T45HD)

Heavy Duty Tubeless Truck

Tire Iron7/8” X 41”

$89.34

KEN34644(T45A2000K)Rim Grabber Heavy Duty

Tubeless Truck Tire Iron

3/4” X 38”

$80.31

KEN34847(T47A)


Tire Iron1” X 52”

$169.98

KEN34122(T21HD)

30” Drop Cen-ter Tire Iron7/8” X 30”

$45.14

KEN30609(TX9)

BUD NUT WRENCHHolds outer cap while

turning inner nut

$21.79 Buzzard Gulch, Inc. 800-821-2932 Catalog T Page # 87

KEN35429(TG11E)

PROFESSIONAL BEAD BREAK-ING HAMMER FIBERGLASS

HANDLE9.1 LBS

32” LONG

$126.85

KEN35229(TG11EH)

FIBERGLASS HANDLE

ONLY FOR TG11E

32” LONG

$57.83

KEN35129(T11EH)

HICKORY HANDLE

ONLY FOR T11E

30” LONG

$29.21

KEN35329(T11E)

PROFESSIONAL BEAD BREAK-ING HAMMER US HICKORY

HANDLE9.2 LBS

30” LONG

$110.02

KEN30620(TX50)

Combination Cap Nut Wrench

41MM & 1-1/2”

$42.77

KEN30618(TX200)1-1/2”

Heavy Duty Cap Nut Wrench Will not slip

$48.47

KEN34645(T45A)


Tire Iron3/4” X 37”

$69.82

KEN35427(TG11D)PROFES-

SIONAL BEAD BREAKING HAMMER

FIBERGLASS HANDLE 18”

LONG

KEN35449(T2001)

TIRE DEMOUNT TOOL FOR

SUPER SINGLES AND OTHER

LARGE TIRESLength: 39” Stock: 3/4”

$212.18

KEN35450(T2002)

TIRE MOUNT TOOL FOR

SUPER SINGLES AND OTHER LARGE

TIRESLength 38” Stock:

11/16”

49.56

KEN31710Made of solid brass, holds the bead in place against the wheel when mounting the tire on to wheel. Do not use to pry.

$42.11

Bead Holding Device

$108.00

KEN35425(TG36)

Heavy Duty Tire Hammer

18” Long6 lbs

$123.91

Size Part# 17mm x 55 ft/lbs 28202 17mm x 80 ft/lbs 28206 19mm-3/4’’ x 65 ft/lbs 2821019mm-3/4’’ x 80 ft/lbs 2821419mm-3/4’’ x 100 ft/lbs 28218 13/16’’ x 100 ft/lbs 28222 21mm x 80 ft/lbs 2823022mm-7/8’’ x 120 ft/lbs 2824222mm-7/8’’ x 140 ft/lbs 28246 24mm-15/16’’ x 140 ft/lbs 28250

This set contains the most popular items to service the majority of passenger and light trucks.

Includes:17mm x 55 ft/lbs•17mm x 80 ft/lbs•19mm-3/4” x 65 ft/lbs•19mm03/4” x 80 ft/lbs•19mm-3/4” x 100 ft/lbs•13/16” x 100 ft/lbs•21mm x 80 ft/lbs•22mm - 7/8” x 120 ft/lbs•22mm-7/8” x 140 ft/lbs•

24mm-15/16” x 140 ft/lbs•

GP44000 $384.231’’ Drive Torque Limiting Socket Set

Save $83.12

GP28200 $282.14

1/2’’ Drive Torque Limiting

Socket SetSave $65.83

Sizes include: 33mm x 475 ft/lbs 1–1/4’’ x 250 ft/lbs 1–1/2’’ x 475 ft/lbs13/16’’ square x 650 ft/lbs.

1/2” Torque Limiting Individual Sockets

ColorGreenRedYellowBlueGreyBrownLt BrownWhiteTurquoiseLt Green

Size Torque Part # Price 3/4 x 10-1/2” 250 33250 $81.70 3/4 x 10-1/2” 475 33475 $81.70 1” x 11” 250 44250 $106.17 1” x 11” 475 44475 $106.17

ColorRedYellowRedYellow

Cost$33.04 $33.04$34.02$34.02$34.02$34.02$34.02$36.46$36.46$38.87

Torque55806580

10010080

120140140

3/4” and 1” Torque Limiting Extensions

This set contains the most popular items to service themajority of HD Trucks

PARTGP44033GP44040GP44048GP44313

COST $114.85 114.85 114.85 122.80

ESC20406Bead Keep for Tractor

Trailer Tires (Pair)$89.10

ESC20397Bead Wedge/Tire Drop

Center Tool

$43.48

KEN34645C(T45AC)

Classic Style Tubeless Tire

Iron3/4” X 37”

$80.64

TIRE CHANGING EQUIPMENT


Demount tubeless truck tires in seconds. Never lift tire to demount rear or bottom bead.Eliminates bead damage. Handles all tubeless truck tire 16.5” - 24.5” diam-eter and some super single “floats”. No damage to aluminum or painted wheels.

ESC70100 $318.99

Demounting Tool for Tubeless Truck Tires- Use this durable steel tool to demount nearly any 22.5” or 24.5” tubeless truck tire.- Allows demounting of the tire without lifting the entire wheel and tire off the ground - reduces back injuries- Solid steel Cobra head is press-fit into the steel handle - no fasteners to loosen or fall out- Aluminum bead support to grab the top of bead of Super Single and Super Wide tires

This set contains all the tools you need to change most 22.5” & 24.5” tubeless truck tires quickly and easily.

The Set Contains:-Blue Cobra Truck Tire Demount Tool (35440) - $269.95-T45C Classic Tubeless Tire Iron (34645C) - $80.64- Double-End Tire Spoon (33050) - $35.78- 8” Bucket Euro Paste Lube (35848) - $27.16- Euro-Style Lube Applicator Brush (30512) - $18.41- (2) Aluminum C-Lok Bead Holder (31713) - $.22.88ea.- Leather Rim Protector (31810) - $25.64

BLUE COBRA TRUCK TIRE SERVICE SETKEN35442

$359.95

Loosens the bead from the rim with leverage. Excellent for removing the tire

without removing the wheel from the tractor.

Manual Only

ESC70160$176.40

BEAD-CHEATA by SpeecoBead Breaker

FX05500$206.13

Dismounting and mounting tires quickand • easyApplies up to 10 tons of pressure on the bead• Small enough to fit into a tool box• Simple to operate• Farm uses: Tractor tires (front and rear)• All vehicles including ATV, fork lifts, wheel • barrows & moreSuggested Manual Only•

KEN35924(T24B)

IMPACT BEAD BREAKER46” LONG

WGT 13.5 LBS.

$143.52

KEN35926(T26B)

HEAVY DUTYIMPACT BEAD

BREAKER50” LONG

WGT 23 LBS.

$215.31

24 LB SLIDE HAMMERBreaks the most stubborn beads with

ease. Reduces user fatigue with spring action design. The wedge

foot is forced between the bead and rimflange,deliveringblowdirectly

to the tip

ESC70150

$124.92

Handles 38” and 42” 14 ply tires

EASCO MANUALBead Breaker

Description: Newly Designed "Pneumatic" Bead Breaker Loosens tire bead from the rim with leverage. Excellent for working on the tire without removing the

wheel. Newly designed hook is reversible to work on a larger

rang of rim/flanges. Will handle much wider range of tire from automotive

tires and up. Operates with impact wrench and or air ratchet wrench. 5" Stroke

ESC20429-N$653.52

USE AIR IMPACT

TOOL

KEN35440$269.95

ESC90518-100-1 $292.50 ESC90518-100-KIT $399.95

ESC90518-200M $119.95

Removes both top and bottom bead from short side - no need to flip tire/rim.Demount all tubless tire 17.5” through 24.5” & Super Singles up through 315/22.5”Including most radial and bias ply tires.Demounts tire in 8 seconds. * Weight: 22 lbs. (10 kg)

Kit Includes:ESC90518-100-1ESC90518-200M

Kit Weight: 33 lbs

Mount all tubless tire 17.5” through 24.5”Mounts tire in 20 secondsWeight: 11 lbs. (5 kg)

MOUNTING TOOL

MOUNTING TOOL

DISMOUNTING TOOL

DISMOUNTING TOOL

*For Tubeless Truck Tires*

S982 10-160 PSI Regular Extension Service Gage (Large Bore with DH Chuck)

S986 10-160 PSI Regular Extension Service Gage with straight foot for newer style inner duals

S976 10-160 PSI Regular Exten-sion Service Gage w/ DH Chuck

SERVICE GAGES MILTON

$29.91

$18.78


S921 - Radial and Conventional Passenger Tire Gage. 5 to 50 PSI in 1 lb increments.

S928--Tractor Tire Gage (for use on air/water filled tires. 5 to 50 PSI in 1 lb units.

S925-Tire gage for Bicycles, RV’s & Trucks. 20 to 120 PSI in 2 lb increments

S917 Low pressure gage 2 to 20 lbs. in 1 lb units. Ideal for us on ATV, Golf Carts, air springs etc

$5.61

$7.96

$5.83

$6.73

$8.51

PENCIL TYPE GAGES MILTON

WINDOW INFLATOR GAGE (Bubble Scale)

S503 Gage Compete, Chuck Clip with Single Head Chuck (Full Swivel), 3’ hose

S506 Gage Complete, Dual Head Chuck (Full Swivel)

S516 Gage Complete, Dual Head Straight Foot Chuck for inner duals with lock on threads (both ends) (Full Swivel)

$53.20

S522 Bayonet Gage with Dual Head (Truck) Chuck

$42.86

S690 Dual Head Air Chuck $6.86

S693 Dual Head Straight Foot Chuck w/lock on both ends

$9.81

S691 Straight Head Air

Chuck

S699Female

Air Chuck$2.26

S698Chuck clip with Fe-

male Air Chuck$7.51

S696Lock- ONKwik-Grip Safety Air

Chuck 1/4”$8.94

S14701/4” Lock On

ChuckLarge Bore

$23.18

S14961/4” Lock On

Chuck for Large Bore

$46.10

S14711/4” female NPT Long Handle Air Chuck. Straight

push-on type with 5-1/8” handle

Large Bore

$45.71

LARGE BORE AIR CHUCKS

$45.97$51.02

$7.77

TIRE CHUCKS AND GUAGES

S923-Straight Chuck Passanger Car Tire Gauge. 5 to 50 PSI in 1 Lb units $6.01

S927--Dual Chuck Truck Tire Gage, 20 to 120 PSI in 2 lb increments.

$22.14

Long Chrome Truck Tire Gauge “10-150 psi w/Chrome Slide

BJGA-232$17.98

S690-12 12” Dual Head Air Chuck

$12.95

S693-12 12” Dual Head Straight Foot Chuck

w/lock on both ends

$15.73

Features:Lightweight aluminum body with brass

calibration bar and o-ring seals Calibrated 10-120psi in 2 lb. increments Precise inflation/deflation control 1/4" Hose, matches up with component

sizes Comes with "Clip On" Chuck

ESC10950N$72.72

Inflation/Deflation Tire

Gauge with 6’ HoseOSHA Compliant



sizes Comes with "Clip On" Chuck

ESC10951N$108.41





sizes Comes with "Lock On" Chuck

ESC10952N$79.27





sizes Comes with "Lock On" Chuck

ESC10953N$111.57



S920 - Radial and Conventional Passenger Tire Gage. 10 to 70 PSI in 2 lb increments. $6.70

S697-2Easy-On Style Air Chuck with Grip

Chuck Clip$12.17

S932Dial Tire Guage

0-60 psi$21.83

S936Dual Head Chuck

Dial Gauge12” Hose* 0-160 psi

$38.59S951

12” Dual Head Straight Foot Dial Gauge * 0-160 psi

$55.41

Page 90 Buzzard Gulch, Inc. 800-8212932 Catalog T

Detecto Mist Air Leak Locator

Concentrated formula dilutes

with water. Spray on tire to instantly

detect leaks.1 Quart

BeadEze Tire Lubricant

Lubricates tire and rim for

easy mountingWorks for leak detector when

diluted1 Gallon

KEN35847(T147A)$18.09

KEN35805(D105A)$11.17

BJSW900Straight Swab Bucket(Quart)

Red Plastic

$14.58

BJSW79114-1/2” Bead

Lubricant Swab$7.86

BJSW79011-1/2” Bead

Lubricant Swab$7.09

2” eff lgth .625” metal side1-1/2” eff lgth, .625” metal side4-3/4” eff. lgth 90 de angle bend5-1/2” eff lgth 90 de angle bend3-1/8” eff lgth .625” metal side3-3/8” eff lgth .625” metal side3-3/4” eff lgth .625” metal side4-3/8” eff lgth .625” metal side5” eff lgth .625” metal side1-1/8” eff lgth .625” metal side

BJCR338BJCR339BJVC337BJVC340BJVE341BJVE342BJVE343

Standard Tire Valve CoreHigh Heat Tire Valve CoreChrome Valve CapPlastic Valve cap3/4” Plastic Valve Extensio1-1/4” Plastic Valve Extention 1-1/2” Plastic Valve Extension

200 200 100 100 100 100 100

$16.95$27.71$16.19$3.42$17.98$23.03$27.53

BRASS TRUCK & BUS VALVES STEMSComes with Heavy Duty Rubber Grommet for demountable and non-demountable rims with standard .625” side valve hole

VALVE CORES, CAPS & EXTENSIONS

PART #valve Cores for regular and high-temp pas-senger use. Tough metal & plastic valve caps

bxCost

per Box

BJST399BJST398BJRE940BJRE945BJBS228BJLD232BJLD216

BALL BEARING STITCHER w/wood handleSTAINLESS STEEL BUFFER/STITCHER4” LG Diameter Chemical Cure Repair Refill4” Small Diameter Chemical Cure Repair Refill1 QT Bead Sealer W/Brush in cap (Thick black)32 oz. Leak Detector Pinpoint16 oz. Leak Detector Concentrate

$11.01 $ 4.07 $32.19 $26.46 $18.43 $ 9.45 $ 6.75

BLACK JACK CHEMICALS AND TOOLSPART # DESCRIPTION COST

TIRES - TIRES - TIRES - TIRES - TIRES - TIRES - TIRES - TIRES

$20.72$20.91$36.11$36.11$23.09$22.61$24.42$29.75$31.08$19.98

$1.91$2.15$3.59$2.28$8.99$7.20$6.88

Cost per Box

Cost per Box

10 10 10 10 10 10 10 10 10 10

5 5 5 5 40 25 20

bx

bx

BJVS500-10BJVS501-10BJVS509-10BJVS510-10BJVS570-10BJVS571-10BJVS572-10BJVS573-10BJVS574-10BJVS575-10

BJCR338-5BJCR339-5BJVC337-5BJVC340-5BJVE341-40BJVE342-25BJVE343-20

PART #

PART #

BJSW910Angle Swab Bucket(Quart)

Red Plastic

$14.58

BJST399BJST398

RE940

BJLD216

BJRE945

BJBS228

WHEEL BUBBLE BALANCER

RUGGED DIE-CAST ALUMINUM HEAD

CONE. EASY TO USE SELF-LEVELING

STAND. NO NEED FOR LEVELING LEGS

BUILT IN WEIGHT STORAGE

BJWW900 $130.35

BJVT-117ANGLED HEAD VALVE STEM REMOVER -

INSTALLER

$7.20

BJVT-119EASY PULL TUBELESS

VALVE PULL TOOL

$10.18

BJCT-1032 IN 1

VALVE CORE REMOVER / DEFLATOR

IN THE SAME TOOL$3.55

BJCT-106Small Bore

Tube Deflator Quickly

removes air from tire

tubes$9.56

BJVT-116Easy Pull Valve Stem Remover/

Installer$11.06

S449TIRE VALVEINSERTION

TOOL$8.81

WHITE LIGHTNING

WHITE WALL CLEANER

GALLON

TIRES - TIRES - TIRES - TIRES - TIRES - TIRES - TIRES - TIRES

BJKT335TRUCK

TIRE PLUG STARTER KITwith Chrome Tools and 15 Large 6” and 20

small 6”

$64.23

BJKT340TIRE REPAIR KIT

WITH CHROME TOOLS AND 20----4” Large

AND 20----4” Small

$62.70

BJKT20S

ATV TIRE PLUG STARTER KITwith Plastic Tools and

20 plugs for small diameter tires(ATV, lawnmower etc)

$37.68

BEST ROUND - OVAL TUBE PATCHTUBE REPAIRS

BEST FOR SMALL PUNCTURES WITHOUT STRUCTURAL DAMAGE. (BX OF 30)


ROUND ALL PURPOSE OR BIAS TIRE PATCHES

BJRE460BOX OF 60 4” AUTO PLUGS$23.99 BOX

BJRE640BOX OF 40 6”

TRUCK PLUGS$23.99 BOX

Lg DIA

FLAMMABLE PATCH CEMENT

8 OZ. CAN

BJCE508

$9.10BJCE708

$9.34

RUBBER BUFFER CLEANER

32 OZ. CAN

BJRB125$14.74

BJOR812BJOR813BJOR814BJOR815BJOR816BJOR817BJOR818

3” X 4”4” X 6”5-1/2” X 7-3/4”7” X 9-3/4”9” X 11-3/4”10” x 14”12” x 15”

10 10 10 10 5 2 2

$27.97$37.44$77.11117.96$63.57$48.17$56.37

PART # OVAL AG BOOT bx Cost per Box BJOR852

BJOR853BJOR854BJOR855BJOR856

5-1/4” X 7-1/4”6-1/4” X 10”7-1/2” X 13-1/4”10-1/2” X 15”12” X 18”

5 5 5 2 2

$34.13$56.35$69.45$35.91$41.66

PART # SIDE WALLAG BOOTS

bx Cost per Box

Pk. 5 ofValve Cores

$1.59

Hi Perfor-mance

Tire Valve

$4.01

S4365 PK Brass Dome Cap

$1.54

5 Pk. Plastic Dome Cap

$.74

Valve Core Tool

$3.24

Valve Fishing Tool

$3.55

S445Valve Repair

Tool$1.61

Tube Deflator and

Core Remover

$1.52

4 PK 1-1/4” Valve

Extension

$4.92

S447 S444S404 S446

S409S442

BJRE480BOX OF 80 4”

SM AUTO PLUGS

$23.99 BOX

BJLB2000 8 Lb pailBJLB2005 25 Lb pailBJLB2008 40 Lb pail

$18.35$48.71$73.94

PART #

BLACKJACK Bead Lube Paste

COST

BJRE645Box of 45 Truck

Plugs sm diameter

$23.99

OFFROAD

L14100Valve Core Tool

Removes and Installs Valve Cores and Valve Core Caps

(works on inside duals)$13.82

L18810Valve Core Torque ToolProperly Installs Valve

Cores, helps prevent valve core leaks$21.68

BJTP506BJTP507BJTP508

BJTP206BJTP207BJTP208

1-3/4” SMALL ROUND2-3/8” MEDIUM ROUND3-1/8” LARGE ROUND

1-7/16” X 2-1/4” OVAL1-7/8” X 3-7/8” OVAL2-3/8” X 4-1/8” OVAL BJTP208 IS BOX OF 20

$7.36 9.86 20.59 $12.23 19.54 15.67

REINFORCED RADIAL REPAIR PATCHES 1 PLY

BJRA-010BJRA-012BJRA-020BJRA-554

1-3/4” X 3” SMALL2-7/8” X 4-5/8” MEDIUM3” X 5” LARGE4” ROUND LARGE

$26.62 36.69 45.79 28.64

15 15 10 20

BJAP-110BJAP-111BJAP-113

1-3/4” MINI ROUND2-3/8” SMALL ROUND3-1/8” MED ROUND

$6.64 10.71 21.37

20 20 20

FLAMMABLE PATCH CEMENT

32 OZ. CAN

BJCE532

$22.09

NON-FLAMMABLE PXLIQUID PATCH

CEMENT 32 OZ.

BJWC501$20.68

BJRN234 Replacement needle w/eye 4” $3.13BJRN250 Replacement probe $6.79



S439

OMEGA - OMEGA - OMEGA - OMEGA - OMEGA - OMEGA - OMEGA - OMEGA - OMEGA - OMEGA - OMEGA

PL18124C12Ton Air/Hydraulic Bottle Jack

*Min Height 9.5”* Max Height 18 1/2”

*3 1/2” screwWgt 29 lbs

Forged Base

PL18204C20 Ton Air/Hydraulic

Bottle Jack* Min Height 9-3/4”* Max Height 18.75”* 3-7/8” screw Wgt 40 lbs

Forged Base

PL1020020 Ton Hydraulic Inline Bottle Jack

* Min Height 9.5”* Max Height 18-5/8”* 3-1/8” screw* Wgt 28 lbs

PL1030030 Ton Hydraulic Bottle Jack

* Min Height 11”* Max Height 18”* Wgt 55 lbs.

PL1050050 Ton Hydraulic Bottle

Jack* Min Height 9-1/2”* Max Height 13-7/8”

Wgt 104 lbs

20 Ton Short Inline Bottle Jack* 6.5” Height* 11.25” Max Height* 1-5/8” Screw

$160.41

12 Ton Short Bottle Jack* 6.” Height* 10.75” Max Height* 1-5/8” Screw

12 Ton Bottle Jack* 9.5” Height* 18-5/8” Max Height* 3-1/8” Screw

PL10065B6 Ton Bottle Jack

* 8.5” Height* 16-7/8” Max Height* 3-1/8” Screw


$40.44PL10085B

8 Ton Bottle Jack* 8-7/8” Height* 17-5/8” Max Height* 2-3/4” Screw* 14 Lbs.

$96.39$102.45

PL18126C12Ton Air/Hydraulic

Bottle Jack (Cast Base)* Min Height 9-5/8”* Max Height 18-7/8”* 3 1/8” screw* Wgt 27 lbs* Return Springs

SIDE PUMP

SIDE PUMP$56.39

20 Ton Low Profile Air Bottle Jack Welded Base

* Minimum Height of 8-1/8”* Maximum Height of 15-1/2”* Screw- 3-3/8”* Weight- 37 Ibs

PL18209$390.09

20 Ton Omni Vertical or Horizontal Bottle Jack

* Minimum Height of 9-1/2”* Maximum Height of 18-5/8”* Screw-3-1/8”* Weight- 28 Ibs

PL16203B$143.43

$356.72$320.20 $1022.42 $338.90$165.58

$222.91

REPAIR KITSHydraulic A1906S-047 $16.87

Air A27-3-9903-101 $34.98

REPAIR KITSHYD A1206S-046 $15.26

Air A27-3-9903-101 $34.98

REPAIR KIT 248-3-9900-106 $81.20

REPAIR KIT B3000S-034 $40.53 REPAIR KIT

B20AOS-36 $16.87

REPAIR KIT HYD A24060-000 $14.30

Air Kit A27-3-9903-101 $34.98

REPAIR KIT B12AOS-035 $18.87 .

REPAIR KIT B12ASS-034 $16.87 .

REPAIR KIT B20ASS-034 23.51

REPAIR KIT B20607-0001 $11.38

REPAIR KIT B20807-0001 $23.70 .

REPAIR KIT HYD A1906S-047 $16.87

Air Kit A27-3-9903-101 $34.98

PL10120 PL10208

Hose and Handle Valve

A20060-0005

$52.30

PL18206C20 Ton Air/Hydraulic Bottle Jack (Cast Base)* Min Height 9-3/4”* Max Height 18-3/4”* 3-7/8” screw* Wgt 40 lbs* Return Spring

$298.52REPAIR KIT

Hyd Kit A20060-000 $17.24Air Kit A27-3-9903-101 $34.98

PLBH2219$298.52

PLBH2200B$118.81

PLBH2120B$73.33

BG20B$159.95

20 Ton Air Actuated Bottle Jack

Min Height: 9-5/8”Max Height: 18-7/8”Weight: 39 Lbs

20 Ton Side Pump Bottle Jack

Min Height: 9-7/8”Max Height: 18-7/8”Weight: 28 Lbs

12 Ton Side Pump Bottle Jack

Min Height: 9-5/8”Max Height: 18-5/8”Weight 19 Lbs

Welded base and cylinder to assure strength and eliminates leaks. Chrome-plated pump, piston, and ram for added rust resistance. Extension screw gives added height when necessary. Meets ANSI/ASME PALD standards & CE/GS.

Specifications: Min. Height - 9 5/8" Max. Height - 18 3/4"

20 Ton Air/Hydraulic

Jack

ESC10450$199.95

20 Ton Air/Manual Hydraulic Bottle Jack

Min Height: 10-3/8”Max Height: 20”3” Screw

PL10128

JACK STANDS FOR ALL JOBSJACKS FOR HIGH WHEEL EQUIPMENT

HW935033 Ton Hein-Werner

Jack Stands12” Min Height19” Max Height5/8” IntervalsBase size 7-1/2” x 9”Saddle Size 1” x 4-1/2”19 Lbs.

HW935066 Ton Hein-Werner

Jack Stands16-3/8” Min Height25-3/8” Max Height5/8” IntervalsBase size 10-1/2” x 13”Saddle Size 1” x 5”42 Lbs.

7 TON Cap9.5” to 14.25”

10 Ton High Lift Pin Style 27-7/8” to 47-3/8”

22 Ton Cap Truck Pin Type

12-1/8” to 19-7/8”


$116.75 $174.09

PL32225B$284.14

PAIR

PL32075B$182.41

PAIR

PL32107B$523.13

PAIR

BGSL-13Slide Hammer Puller Set

8 Function: Internal/External. 3 Jaw Puller

Internal/External 2 Jaw Set in Metal Carrying Case

$69.95

SX3911Professional Slide Hammer Puller Set

w/ 5 lb hammer8 Function internal/external 3 jaw

puller, internal/external 2 jaw puller, puller hook, rear axle puller, dent

puller, special grip wrench adapter$101.75

OmegaPL42000C$831.93

1 Ton Transmission JackMinimum Height- 7-7/8”

Max Height- 33-1/2”

Saddle- 14-1/4 x 8”---198lbsOther Jacks and Styles available

PL32125B12 TON JACK STANDS

17.5” TO 27.5”

$159.60 PR

BGJS-66 TON JACK STANDS

14” TO 23”

BGJS-33 TON JACK STANDS

11.75” TO 16.75”

$56.95pair

$29.95pair

22 TON PIN JACK STANDS11.8” TO 19.7”

HEIGHT INTERVALS 3” X 3.1”

10 TON PIN JACK STANDS28.1” TO 46.5”

HEIGHT INTERVALS 10” X 2”

SX1410$394.15

SX1522$212.75

PL34100$999.95

10 TON PORTABLE AIR JACK and SUPPORT STAND

Low Height: 17.5”Maximum: 51”

comes with 10” hose190 Lbs

OmegaPL42003

$1,957.401 Ton Telescoping Transmission Jack

Minimum Height: 48 5/8”Max Height: 77 3/8”

Saddle: 15 1/2 x 12 5/8”306 Lbs

10 TON PORTABLE AIR JACK

Low Height: 17.5”Maximum: 49”

Weight: 187 Lbs. 8” Wheels

Air Valve Provides Speed ControlSX6710$969.50

PL32065B6 TON HEAVY DUTY

OMEGA JACK STANDS15 3/8 to 24 1/4”

$89.34 PR

12 TON MAJIC LIFT OMEGA JACK STANDS

Lifts without pulling up the arm

PL32126$332.89

PL93200$872.13

20 TON TRUCK RAMPS

Steel Wheels for Extra Durability

Sold Only in Pairs

BGFJ06710 Ton Floor Jack

Lift 6.5 to 23”Weight 330 lbs

$834.50

BGFJ0655 Ton Floor JackLift 6.5 to 23”

Weight 280 lbs

$699.95

BG20-8F8 TON FLAT BOTTOM

LONG RAM JACK

$59.95

BG20-8R8 TON RING ON

BOTTOM LONG RAM JACK

$59.95

BGBV7875 3” VISEBGBV7880 4” VISEBGBV7886 5” VISEBGBV7888 6” VISE

$49.95$59.95$89.95$99.95

OPENINGBGBVF-4 4” VISE 4”BGBVF-5 5” VISE 5”BGBVF-6 6” VISE 5.5”

PRICE$21.95$24.50$39.95

SX5041BSUNEX 4 TON FLAT BOTTOM

LONG RAM JACK

$105.45

SX5040BSUNEX 4 TON RING BOTTOM

LONG RAM JACK

$105.45

PL449404 Ton Omega

Flat Bottom Long Ram Jack

$117.23

PL449808 Ton Omega

Flat Bottom Long Ram Jack

$153.18V226340

4” Irwin Drill Press Vice4” Jaw Width,

1/2” Throat Depth, 4-1/2” Jaw Capacity

16 Sp. Floor Drill PressHeavy Duty 3/4 Hp MotorTable rotates 360 degress and pivots 45 degress on each side. Replacable

5/8”chuck. 200 to 3850 rpm. 3-1/8”

spindle stroke. 2-3/4” column. 11-1/2” table. Height 62” Shipping Weight 146lbs

$30.64

FLAT DRILL PRESS VISE

SX5000A$654.59

PL449818 Ton Omega Air/ManualFlat Bottom

Long Ram Jack

$390.13

CROSS VISE

SIZE PRICE

SX5085CONVERT FLAT BOT-TOM JACKS TO PIVOT RING BOTTOM JACKS

(bolts included)

$16.65

Welded base and cylinder to assure strength and eliminate leaks.

Chrome-plated pump, piston, and ram for added rust resistance.

Self-retracting. Meets ANSI/ASME PALD standards & CE/GS. Specifications; Min. Height - 8 1/4" Max. Height - 20 3/4"

ESC1044822 Ton Air/Hydraulic Jack $639.08


SX5081BSUNEX 8 TON FLAT BOTTOM

LONG RAM JACK

$138.75

PL250373 Ton Magic Lift SUV

Service Jack4” Min Height

23” Max Height--138 lbs

5 Ton Service Jack7” Min Height - 27” Max Height- 6-1/2” Saddle,

42-5/8” HDL 233 lbs

10 Ton Service Jack7” Min Height - 27” Max Height- 7-3/8”

Saddle, 42-5/8” HDL 427 lbs

PL22100C

$940.52

PL22050C

PL270252-1/2 Ton Magic Lift

Service Jack4” Min Height

20-1/4” Max Height--109lbs

$332.89

$516.48

$1694.16

DRILL PRESS VISES

HW936523 Ton SUV Service jackHeavy Duty Frame for rugged

applicationsLonger ChassisOne Piece T-HandleFoam handle pad protects the

vehicleU-Joint Release for load control5” Min Height23-1/2” Max Height (18-1/2”

Power Raise)6-3/4” Saddle107lbs

HW936422 Ton USA Service JackRemovable 1 pc handleFlanged side plates increase

strengthFull swivel rear castersSealed hydraulic pumpAutomatic valve to prevent over-

loadingCast Iron Lift armU-Joint release mechanism for

precise load control4-1/2” Min Height20-1/2” Max Height (15-3/4”

Power Raise)6-3/4” Saddle90 Lb Weight

PL23221C22Ton Air/Hydraulic

Axle Jack* Min Height 9-3/4”* Max Height 23-5/8”* 3-7/8” screw

Wgt 100 lbs

$780.81

3 Ton Service Jack

5-1/4” Min Height-19” Max Height 5” Saddle, 87 lbs.

42-1/8” Handle

PL21030B

PL250333 Ton Floor Jack* Minimum Height of

5-1/4”* Maximum Height of 20-

7/8”* Saddle- 5”* 98 Ibs

$282.50free pair of 3 ton Jack stands

included. (PL32035)

$255.10

REPAIR KIT G-93M00-0000 $17.41

SX66033 Ton Service Jack

Service Jack4-1.2” Min Height

19” Max Height--91 lbs

$199.80

$771.43

$556.59

6” Jaw Opening, 3-1/2” Throat Heavy Duty 25,000 psi casting for

strength and durability. 360 Degree Swivel Base

45.65 lbs

WLT63302WS6

$235.95

8” Jaw Opening 4” ThroatHeavy Duty 25,000 psi casting for

strength and durability. 360 Degree Swivel Base

70.4 lbs

WLT63304WS8

$353.10

4-1/2” Jaw Width 4” Jaw Opening, 2-5/8” Throat

Heavy Duty 30,000 PSI casting for strength

and durability 180 Degree Swivel Base 19.4 lbs

WLT11126674

$115.50




WLT11127675

$145.20

6-1/2” Jaw Width 5-1/2” Jaw Opening, 3-13/16” Throat


and durability 180 Degree Swivel Base 43 lbs

WLT11128676

$198.00

8” Jaw Width 7-1/2” Jaw Opening, 4-1/2” Throat



WLT11800648HD

$371.25


60,000 PSI ductile iron 360 Degree Swivel Base

41.2 lbs

WLT631991745



51.55 lbs

6-1/2” Jaw Width 6-1/2” Jaw Opening, 4” Throat


71 lbs

8” Jaw Width 7” Jaw Opening, 4-3/4” Throat

Industrial 111 lbs 60,000 PSI ductile iron

360 Degree Swivel Base

ATV ALL-TERRAIN VISEFits a standard 2” hitch and includes a hitch pin for security.

Can be mounted on a bench or trailer for great versatility with the included mounting bracket.

Lightweight with an integrated carrying handle.Patented 360 degree locking handle

Lifetime Warranty

WLT10010

6” Jaw Width 8-3/4” Jaw Opening,

3-3/8” Throat Heavy Duty Shop Vice

Swivel Base

V226306ZR

6” Jaw Width 6” Jaw Opening, 4-3/16”

Throat Heavy Duty 30,000 PSI casting for strength and durability

180 Degree Swivel Base 64.1 lbs

WLT00191656HD

$264.00

$140.02


Professional Reversible Mechanics Vice

6-1/2” Jaw Width7-10” Jaw Opening3-3/4 Throat Depth

1/8” to 3” pipe capacity50 lbs

Professional Reversible Mechanics Vice

8” Jaw Width8-11” Jaw Opening4-3/4 Throat Depth

1/8” to 3” pipe capacity74 lbs

KEN64650$311.40

KEN64800$396.94

$1072.50$643.50$528.00

WILTON 60,000 TENSILE5 YEAR WARRANTY

WILTON 30,000 TENSILE1 YEAR WARRANTY

IRWINLIFETIME WARRANTY

ALL OTHERS1 YEAR WARRANTY

8” HYDRAULIC BENCH VISEFEATURES:5 Tons of clamping powerHands Free Operation with Foot Pump ControlAir Conrol Valve for Variable Speed and added safety52,600 PSI TensilOperates as a Press Vertically or Horizontally8” Jaw FaceReplaceable Jaw PlatesHydraulic Pressure Closes JawsSpring Return Opens Jaws

8” HYDRAULIC BENCH VISE

POPHV859A

$1395.00With pump unit

MADE IN USAMADE IN USA

LIFETIME WARRANTY

MADE IN USA

LIFETIME WARRANTY LIFETIME WARRANTY LIFETIME WARRANTY

$231.00V4935505

5” Multi-purpose vise 5” Jaw Opening

3” Throat, Mechanics Shop Vise

Swival Base

$143.39

MADE IN USA$717.75

POHE-3Magnetic Clamps for vise jaws. Works on any brand or size of

Vise.

$18.46 pair

BG14-V40SHBG14-V50SHBG14-V60SH

$154.00$206.80$298.10

4”5”6”

Stock# Price

HIT STEEL VISERugged cast steel construction and steel channel beam with serrated jaws. Built-in horizontal pipe jaws. 360 degrees swivel base with double swivel lock-down. Large flat anvil surface with curved horn. Ideal for plumbing,work shop and professional user.

BG14-SV4BG14-SV5BG14-SV6BG14-SV8BG14-SV10

4”5”6”8”

10”

$112.00$141.00$161.00$225.00$327.00

4”5”6”8”

10”

Stock# Jaw Width

MAXOPEN Price

ROTARY BENCH VISEDurable cast steel construction,powerful clamping and holding power. Removable V-shaped pipe jaws and large anvil. 360 degrees swivel with scale. Chrome plated slid-ing T-bar handle.

2-1/2”2-5/8”

3”3-1/2”

4”

ThroatDepth

3”3-1/4”3-3/8”

Jaw Width

MAXOPEN3-1/2”4-1/2”5-1/2”

ThroatDepth

WLT632001755

WLT632011765

WLT632021780A

6”” Jaw Width 5-3/4” Jaw Opening, 4-1/8” Throat

Heavy Duty and durability 360 Degree Swivel Base

69.35 lbs

WLT21500746

$371.25



91.5 lbs

WLT21800748A

$536.25

5-1/2” Reversible Mechanics Vise9-3/4” Jaw Width when reversed

6” Jaw Opening, 3-3/4” Throat Heavy Duty (2 anvil work spaces)


WLT145004500

$222.75



52.8 lbs

WLT21400745

$288.75

BACRK-01Air/Water Tight 12” to

14” rod keeperHolds 10 lbs of Rod

$9.59 each

BACRB-01Bracket to hang 3 of the Rod Keepers on the wall

$11.32


BGMAG-MMEDIUM WELDING MAGNET4-1/2” side

to side3” Tall

Holds ups to 25 lbs

$1.25

BGMAG-LLARGE WELD-ING MAGNET

6” side to side

4” TallHolds up to

50 lbs.

$4.09

BGMAG-JJUMBO

WELDING MAGNET

7” side to side5” Tall

Holds up to 75 lbs.

$5.83

KT3-7412KT3-7418

KT3-7460KT3-7490

3/16” X 25’3/16” X 50’

1/4” X 25’1/4” X 50’

28.3550.91

32.5355.58

KT5-0040TIP DRILL

Contains 12 High speed drill bits (even no’s 52-

74) all aluminum collet.

$5.31

KT5-0070STANDARD TIP CLEANER KITRecommended use with all brands of standard cutting

tips and welding tips. Stainless steel wires

$3.69

KT5-0075LONG TIP CLEANER KIT

Recommended use with all brands of standard cutting tips

and welding tips. Stainless steel wires

$4.34

KT5-1200SINGLE FLINT STRIKER

High Tinsel Steel & 3/8” round wire

$3.05

KT5-1205Fits most standard Single Flint Strikers

5 Per card$1.59

KT5-1300THREE FLINT STRIKER

1/2” Wide Steel FrameRotating 3 flint head

$3.24

KT5-1305Replaces rotating 3 way renewals. Fits most 3 way strikers

$3.24

KT5-0065STAINLESS STEEL FLAT

SOAP STONE HOLDER

$2.39

KT5-00805 PK Flat Soap Stones #

1 White

$1.55

KT5-0066STAINLESS

STEEL ROUND SOAP STONE

HOLDER

$2.92

KT5-00855 PK Round Soap Stones

# 1 White

$1.55

KT5-1000SPRING HANDLE

CHIPPING HAMMER

$5.81

KT5-1090DUAL PURPOSE CHIP-

PING HAMMER

$9.47

ELECTRODEHOLDERSKT2-2140

400 AMP

$16.96

KT2-2290500 AMP

$13.23

KT4-2476RATCHETING FACESHIELD

HEADGEAR27 sizes$13.32

KT4-2477CLEAR FACESHIELD

KT4-2478TINTED FACESHIELD

CHOICE $5.50

TWIN HOSE OXYGEN ACCY HOSE

IMPORT AUTO REWIND OXY REELS

BGAR36841/4” X 50’ REEL

$169.95

200 PSI1/4” Plate Steel

Support Double support

points to the center shaft

1” self-lubricating bearing

Solid 1” steel cen-ter support shaft

8 Position locking ratchet

18” Inlet hose as-sembly standard

COX “SHW” Spring Driven Welding Reels

COXSHWN1501/4” X 50’ REEL

$390.39

COXSHWN1751/4” X 75’

$475.02

COX112W-1-100MANUAL OXYGEN/AC-

CYLENE REEL HOLDS 100’ OF HOSE (Not Included)

$389.48COXPWC17-5002

AUTO REWIND WELDING CABLE REEL

Designed for Electrode and Welding Cable LeadsEach Lead requires

it’s own reel50’ 2 GAUGE

600 volt 225 ampWeight 56 lbs.

$748.93

Many sizes availableCall for quote

ELECTRODEHOLDERS

KT2-2120 200 AMP

$14.95

STEEL GROUND CLAMP

KT2-2260 300 AMP

$7.51

BGSLIDE10SLIDE HAMMER LOCKING PLIER SET. THE PLIER CAN BE REPLACED WITH A VISE GRIP BRAND WHEN NECESSARY.

$29.95

Multi Purpose Razor Scraper- Great for decals- Accepts any standard single edge blade

TI115081-1/4” Stainless

Steel OFFSET Scraper

- Go through blade- Metal capped handle

$7.55

TI11500

3” Stainless Steel Scraper OFFSET

- Metal capped handle

$9.74

TI11504

TI170001-1/4” Rigid Scraper1-1/4” Putty Knife3” Putty Knife

$21.07

TI11030

$7.21

TI11038Replacement

Blades for TI11030$5.40 100 PK

V1774106

Protouch Retractable Utility Knife

4 point $15.15

V2082101Standard Retractable Util-

ity Knife

$5.03

V208430050 Pack Irwin Bi Metal

Blades w/dispenser

$18.30

V2089100Irwin Folding Utility Knife

Compact and rugged disignQuick-Change button for easy changeWire Stripper notch for build in ConvenienceExtended thumb ledge provides sup-port and leverage while cuttingAnchored belt clip for convenient access

$14.78

$6.63

V208420020 Pack Irwin Bi Metal Blades

w/dispenser$7.66

Hi Vis Retractable Utility Knife

Includes 3 blades

V2082300

KD3121D5 Pc. Hook & Pick Set.

Magnetic Handle and 4 picks

$12.79

BGFT10.510-1/2” Fence Tool

Cut-Drive-Stretch Wire

$11.48

TIE ROD FORKFORK OPENING 5/8”

Length 12”

$6.17

BALL JOINT FORKFORK OPENING 15/16”

Length 12”

$6.17

BGTIEBGBALLKD3369F 2-3/4” TO 3-1/8”KD3508D 2” TO 5”

$26.39

$37.00

1-1/4” Stainless Steel Scraper

STRAIGHT- Go through

blade- Metal capped

handle$7.40

TI1601310 PC. Screw Extractor Set

With Left Hand Bits

$14.783 Pc. Internal Pipe

Wrench Set3/8”, 1/2”, 3/4”

Remove broken, threaded ends of pipe, pipe plugs, and

fittings

TI11498$16.33


BGPR1010 Ton Pull Back

Ram26” Long

$64.50

AES80416Ram Half Coupling

for 4 Ton and 10 Ton Porta Power

AES80442 Hose Half Coupling for 4 Ton and 10 Ton

Porta Power

AES8100210 Ton Ram with

2-1/4” Stroke

$108.10

AES804072 Ton Ram

with 3” Stroke

AES804044 Ton Ram with

5/8” Stroke

$68.17

$13.01

$12.54

$79.57

AES80460Overhaul Kit for 4 Ton

Porta Power$19.48

AES81060Overhaul Kit for

10 Ton Porta Power$24.90

BGPP-044 TON PORTA POWER KITPARTS INTER-CHANGE WITH MOST PORTA

POWER PARTS3 Heads, 2 toes

complete kit

$119.95

BGPP-1010 TON PORTA

POWER KIT Parts interchange with most porta

power replacement parts. 3 Heads, 2 toes and much

more

$199.95

PL500404 TON BODY REPAIR KIT

8000-10,000 PSI PUMP

Pushing, Spreading & Pressing

3 heads, 2 toes and all the parts you need

$268.49

PL5010010 TON BODY REPAIR KIT

8000-10,000 PSI PUMP

Pushing, Spreading & Pressing

3 heads, 2 toes and all the parts you need

$420.49

AES651451/2 Ton

Spreader Ram

$53.51

PLB69477Ram Half Coupling

for 4 Ton and 10 Ton Porta Power

PLB69478 Hose

Half Coupling for 4 Ton

and 10 Ton Porta Power

$14.91$16.45

Extreme all weather flexability -40 to 150 degreesNo memory-lies flatKink rsisistant - 3/4” GHT fittings both ends150 psi working, 500 burst

LGHFZG5100YW

$74.525/8” X 100’


LGHFZG550YW

$47.725/8” X 50’


LGHFZG575YW

$61.435/8” X 75’

PRESSURE WASHER REELS

COXMP-N-3503/8” X 50’ Automatic Reel for

Pressure Washers3000 psi•250 F•Dim: 8-1/4” x 21-•1/4” x 19-1/2” Weight: 53 Lbs•

$460.46

OTHER SIZES AVAILABLE

COXSMK202Pivot Base Bracket for Wall Mount with

8 Position Lock $65.07

COXSM1231003/8” X 100’ Hand Crank Reel for

Pressure WashersHose not included

4000 psi•300 F•Dim: 19” x 13-1/2” x 12” •Weight: 53 Lbs•

$167.44

Picture Shows Side Mount Bracket COXSMK-202

LGHFZPW3425M

$54.391/4” X 25’

Cold Water OnlyExtreme Flexibility under pressureM22 Brass Connectors3500 psi

LGHFZPW3450M

$99.721/4” X 50’

HAND CRANK HOSE REELS FOR WATER SOLD ON

PAGE #4

COXPMP-N-3253/8” X 25’ Automatic Reel for Pressure

Washers3000 psi•250 F•Dim: 7” X 18-5/8 x 7-1/8”•Weight: 49 Lbs•

$315.77

FLEXZILLA GARDEN HOSE 500 BURST

FLEXZILLA WATER HOSE 900 BURST

Black Stripe MarkingExtreme all weather flexability -40 to 150 degreesNo memory-lies flatKink rsisistant - 3/4” GHT fittings both ends200 psi working, 900 burst

LGHFZW58100YW34

$133.055/8” X 100’


LGHFZWP575

$94.335/8” X 75’


LGHFZWP550

$68.605/8” X 50’

PRESSURE WASHER HOSE

Cold Water OnlyExtreme Flexibility under pressureM22 Brass Connectors3500 psi


LGHFZG503YW

$9.435/8” X 3’

GARDEN HOSE WHIP

Picture not exact

Page #98 Catalog T Buzzard Gulch, Inc. 800-821-2932

STR65018STR65024STR65050

Stylus Flashlight Uses 3AAAA batteries with 10 hr runtime and

12,000 CandlepowerBlack Shell/White Light Gold Shell/White LightBlue Shell/White Light

Choice $17.59

Hand operated Hydraulic with up to 3800 lbs of

power. Sets aluminum, stainless, and steel rivets

to 1/4”

Air/HydraulicUp to 3500 lbs of pulling power. Sets aluminum, stainless, and steel rivets From 1/8” to 1/4”

MAR39010BIG DADDY 1/4” RIVETER

Sets 1/8” to 1/4” rivets.

$162.41

4 Nosepieces 3/32”, 5/32”, 1/8”, 3/16”4 sizes of rivits includedCarrying case

AP1432

$24.47MAR39000

MARSON RIVETER

Sets up to 3/16” rivets.

$30.46

AP14261/4” Hand Riviter

Sets from 1/8” to 1/4”20” Long

$33.40

MARSONMARSON

HKAK175A$353.84

HK150A$231.41

Astro Pneumatc

Mercer Abrasive Ear Muffs (Adjustable Headband)Lightweight only 5 Oz.

$8.10

MED40001

Latex and powder free XLarge gloves comes in box of 90.

$12.36

ME074LAXNP Nitrile Gloves Powder Free Size: XLargeBox of 100

$16.50

ME074NITXBUZZARD GULCH, INC.

800-821-2932www.buzzardgulch.com

[email protected] 660-439-2720ME074LALNP

SAME ONLY SIZE LARGE (BOX OF 100)ME074NITL

SAME ONLY SIZE LARGE (BOX OF 100)

CRTK130Red/White/Blue Frame Toma-

hawkClear Lens

MOST POPULAR CLEAR LENS GLASSES FOR THE MONEY

CRTK132Red/White/Blue Frame Toma-

hawkGray Lens

MOST POPULAR SHADED LENS GLASSES FOR THE MONEY

CRST110Storm Ratcheting TemplesClear Lens Black Frame

CRST112Storm

Ratcheting Temples

Grey LensBlack Frame

CRST114Storm

Ratcheting Temples

Amber LensBlack Frame

CRST117Storm

Ratcheting TemplesSilver Mirror Lens

Black Frame$4.75 ea

CRST128Storm Ratcheting

TemplesBlue Mirror Lens

Navy Frame$7.09$7.07

CR2230RChemical Splash Goggles

$2.39$2.76 $3.29

$5.79

$5.25 $4.44

HVLP Gravity Feed Spray Gun

1.7mm Needle1000 mL (Quart) Metal CupSpray Pattern Control knobAir Inlet: 1/4”Operating Pressure: 15-45 PSIAvg. Air Consumption: 7-9 CFM

TI19117$68.98 TI19018

$47.41

TI192204 Pc. HVLP Gravity Feed

Spray Gun1.0 mm nozzle1.4mm nozzle1.7mm nozzle

Locking pressure regulator with gauge

$118.73

HVLP Gravity Feed Spray

Gun1.8mm NeedlePlastic 600 cc (Pint) CupBrass Fluid & Air NozzleAir Consumption: 7-9 CFMAir Inlet: 1/4”

TI19418Siphon Feed

Production Srpay Gun1.8 mm nozzle

$31.05

TI196102 Qt Spray Gun Kit

Includes: gun with tip, 2 hoses, 2 Qt pot with

regulator

$89.95

For Primers and Heavy Materials2.3 nozzlePlastic Cup20.25 oz

TI19023$47.50

POST DRIVING WITH POWERRevolutionize your fencing procedures with the

air drivenPICKET POST DRIVER

Designed and manufactured in AustraliaBuild long stretches of fences in record time.

Drive T posts through shale, black soil surfaces, rocky ground, ironstone and caliche rock.

Adaptable to drive a variety of other steel, wood, and fiber-glass posts.

www.powerpostdriver.com$1,949.95


GAS PUMA COMPRESSORS

CAST IRON PUMP5.5 HP HONDA GAS ENGINE12.5 CFM @ 40 PSI10.5 CFM @ 90 PSI150 Maximum pressure

LARGE ELECTRIC PUMA COMPRESSORS

100% CAST IRON CONSTRUCTIONCENTRIFUGAL UNLOADERLG HD INLET FILTER/SILENCERNEEDLE BEARING ON WRIST PINCONTINUAL RUN ON START/STOPWITH WIRED MAG STARTERCOMES WITH OIL INCLUDED

TK5080HMTK5080VM

5 Hp 80 Gallon Specify Horizontal Or Vertical19.2 cfm @100 PSI18 cfm @ 175 PSI175 PSI

TK7580HMTK7580VM

7.5 Hp 80 Gallon Specify Horizontal Or Vertical24.8 cfm @100 PSI22.8 cfm @ 175 PSI175 PSI

LIQUID GUAGE8 GALLON TWIN TANKSCENTER WHEEL190 LBSENGINE IDLES

NUTUE-8008GECALL FOR QUOTE

CALL FOR QUOTE

CALL FOR QUOTE

SHIPPING PREPAID ON ORDERS OVER $250

NCLA-5706115 Volt Mini Compressor

PUMA 150 PSI1.5 Horsepower Air CompressorOil-Less CompressorCompact, Light Weight3.4 CFM @ 40 PSI3 CFM @ 90 PSI115 Volt1.5 Gal Capacity34 lbs Weight

LIQUID GUAGE2--4 Gal Tanks to make

8 GallonsCenter Wheel250 LBSEngine Idles

CAST IRON PUMP8 HP HONDA GAS

ENGINE15.6 CFM @ 40 PSI12.5 CFM @ 90 PSI175 Max pressureElectric Start

$169.95

NCPD-100612 Volt Mini Compressor

PUMA 135 PSI1 Horsepower Air CompressorOil-Less Compressor3.4 CFM @ 40 PSI3 CFM @ 90 PSI12 Volt (no hookups)1.5 Gal CapacityPressure SwitchWeight 34 lbs.

$269.95

TLR-1Magnetic Holder that

holds 6 different air tool chucks, or small air tools and keeps them off the

bench and floor and always ready for use

Attaches to any steel tool box, air com-

pressor frame, steel bench, etc

$21.25

NC5508GCALL FOR QUOTE

NCPD-102112 Volt Mini Compressor

PUMA 135 PSI1 Horsepower Air CompressorOil-Less CompressorCompact, Light Weight3.4 CFM @ 40 PSI3 CFM @ 90 PSI12 Volt (no hookups)2 Gal CapacityPressure SwitchWeight 42 lbs. $299.95

PRESSURE SWITCHESLF10-L1LF10-L4LF10-H1LF10-H4LF-17-L1LF-17-H1

95-125 PSI95-125 PSI140-175 PSI140-175 PSI105-135 PSI140-175 PSI

SINGLE PORT4 PORTSINGLE PORT4 PORTSINGLE PORT 20 AMPSINGLE PORT 20 AMP

UNLOADERUNLOADERUNLOADERUNLOADERUNLOADERUNLOADER

ON/OFFON/OFFON/OFFON/OFFNO ON/OFFNO ON/OFF

$19.95 $19.95 $19.95 $19.95 $29.95 $29.95

CALL FOR OTHER COMPRESSORS, COMPRESSOR PARTS, AND QUESTIONS

AIR HOSES ARE ON PAGE # 5 AND

Automatic Hose Reels on Page # 3

Milton Air Tank Conversion KitFiller Valve, Gauge, 4’ Air Hose

Assemby, Manifold & Chuck

S682$27.58

FARMEX / SPEECO ROLLER CHAIN BREAKER

TOOLFX05050 BREAKER #25 TO # 60 CHAIN

$18.74FX05051 BREAKER #60 TO #100 CHAIN

$35.17FX05053 REPLACEMENT 05050 $1.00FX05054 REPLACMENT 05051 $1.25

FXS06351 35 10 3/8 12.82 FXS06603 60-H 10 3/4 27.47

FXS06355 35 50 3/8 66.06 FXS06801 80 10 1 46.08

FXS06352 35-2 10 3/8 26.46 FXS06805 80 50 1 219.48

FXS06411 41 10 1/2 11.19 FXS06802 80-2 10 1 91.21

FXS06415 41 50 1/2 57.54 FXS06803 80-H 10 1 52.56

FXS06401 40 10 1/2 13.01 FXS06100 100 10 1-1/4 76.24

FXS06405 40 50 1/2 65.64 FXS06120 120 10 1-1/2 119.70

FXS06501 50 10 5/8 20.07 FXS06241 A2040 10 1 13.08

FXS06505 50 50 5/8 103.38 FXS06245 A2040 50 1 68.10

FXS06502 50-2 10 5/8 44.59 FXS06251 A2050 10 1-1/4 19.00

FXS06601 60 10 3/4 24.83 FXS06255 A2050 50 1-1/4 98.92

FXS06605 60 50 3/4 127.71 FXS06261 A2060 10 1-1/2 23.40

FXS06602 60-2 10 3/4 51.08 FXS06551 CA550 10 1-41/64 44.55

SPEECO /FARMEX

ROLLER CHAINANSI SPEC•PRESTRETCHED•WELDED BUSH-•INGSSolid Rollers•Shot-Peened •Parts

Part # Chain Ft Pitch Cost Part # Chain Ft Pitch Cost

FXS66351 35 4 PK 3/8 .76 FXS76351 35 4 PK 3/8 1.48

FXS66352 35-2 4 PK 3/8 1.48 FXS76352 35-2 4 PK 3/8 3.00

FXS66411 41 4 PK 1/2 .76 FXS76411 41 4 PK 1/2 1.48

FXS66401 40 4 PK 1/2 .76 FXS76401 40 4 PK 1/2 1.48

FXS66501 50 4 PK 5/8 1.46 FXS76501 50 4 PK 5/8 2.94

FXS66502 50-2 4 PK 5/8 1.59 FXS76503 50-2 4 PK 5/8 5.24

FXS66601 60 3 PK 3/4 1.67 FXS76601 60 3 PK 3/4 3.07

FXS66602 60-2 3 PK 3/4 3.44 FXS76602 60-2 3 PK 3/4 6.20

FXS66603 60-H 3 PK 3/4 1.83 FXS76603 60-H 3 PK 3/4 3.39

FXS66801 80 2 PK 1 1.91 FXS76801 80 2 PK 1 3.39

FXS66802 80-2 2 PK 1 3.39 FXS76802 80-2 2 PK 1 6.72

FXS66803 80-H 2 PK 1 5.35 FXS76803 80-H 2 PK 1 4.20

FARMEX CONNECTING LINKS FARMEX OFFSET LINKS

SPEECO / FARMEXCONNECTING AND

OFFSET LINKS(OTHER SIZES AVAILABLE)

COSTCOST

Features and Benefits:Evacuates or dispenses at the

push of a button Convenient manual pump opera-

tion Integrated 2.3 gallon capacity

reservoir Large base with foot stabilizer Durable, chemical resistant poly-

ethylene constructionAt the push of a button, this versatile unit changes from vacuum to pressure for evacuating or dispensing fluids. This functionality makes it ideal for draining tanks or reservoirs then pumping the used fluid back out for easy disposal. Multiple units work great, simply evacuate used fluids with one unit, and then quickly refill with new fluid from a second. For superior mobility, the 7201 utilizes a manual pump, so compressed air or electricity is not required. Acces-sories are included for draining engine oil or transmission fluid directly through the dipstick tubes. Automatic overflow prevention. Quick drain pour spout.

MV7201FLUID

EVACUATOR PLUS

$99.95

Features and Benefits:Convenient manual pump opera-

tion Integrated 1.9 gallon capacity

reservoir Large base with foot stabilizer Durable, chemical resistant poly-

ethylene construction Automatic overflow protection

Quick-drain pour spout. Vacuum is cre-ated quickly and efficiently by manual pump operation, offering superior mobility by eliminating the need for electricity or compressed air. The 7400 is ideal for draining fluids from reservoir on boats, RVs, ATVs, snowmo-biles, farm equipment or motorcycles. Includes accessories for draining engine oil or transmission fluid directly through the dipstick tubes.

MV7400FLUID EVACUATOR

$69.95 Features and Benefits:Economical, accurate and simple method to

find common causes of overheating Pinpoints external leaks caused by loose

clamps or leaky hoses, connectors, water pumps or radiators

Diagnoses internal leaks caused by a blown head gasket or damaged block or head

Test radiator and coolant bottle caps to ensure they are maintaining the correct pressure

Contains adapters to test the cooling system and caps of most US and Asian manufactured cars

Includes:Mityvac Selectline hand pressure pump w/

2” (50 mm) diameter gauge Small Bayonet Test Adapter, Deep Small Bayonet Test Adapter, Shallow Large Bayonet Test Adapter GM/Ford Test Adapter Small Bayonet Cap Test Adapter Large Bayonet/GM/Ford Cap Test Adapter Connection Hose Compression Nut User Manual (English, French, Spanish

MV4560COOLING SYSTEM PRESSURE TEST

$45.36Features and Benefits:

Produces vacuum or pressure at the turn of a switch Comfortable ergonomic design One-finger trigger vacuum / pressure release Has durable, accurate diaphragm style compound

pressure / vacuum gauge Includes everything for performing hundred of

automotive diagnostic and mechanical test, and one person brake bleeding

This new pump is capable of producing either vacuum or pressure with equal precision and convenience. The pump is powerful enough to produce a near perfect vacuum or up to 30 psi (4 bar) of pressure. The combination of dual-vacuum/pressure capability and powerful performance expands the applications of the pump to include turbo- and super-charger diagnostics, fluid transfer, windshield repair, cooling system pressure testing, and pres-sure brake bleeding. In addition to performance improvements, the look and feel of the pump has been updated. It fits more comfortably in the user’s hand, and both vacuum and pressure are created on the squeeze stroke for one-handed operation

MV8500VACUMN PUMP/PRESSURE PUMP

$66.18

Includes:Silverline Elite hand vacuum/pressure pump with 2” (50

mm) compound gauge with rubber boot 4.5 oz. (135 ml) fluid reservoir bottle with fluid transfer

and storage lids 4 Tapered adapters for connecting to tubing from .09” (2.3

mm) to .50” (13 mm) ID 2 Tapered manifold plugs 4 Universal bleed screw adapters 12 Vacuum cap plugs Vacuum line T-adapter (2) ¼” (6.4 mm) ID x 24” (610 mm) long connection tubes 5/32” (4 mm) ID x ¼” (6.4 mm) ID tubing adapter 3 Connection tubes Rubber cupped adapter Master Cylinder Refill Kit (model no. MVA6825) Custom Molded Case User’s Manual (English, French, Spanish, German



This versatile tool can be made into any shape of draining or pouring funnel, pan, tube, channel, or scoop that you can think of. It's flexible, yet it firmly stays in whatever shape you bend it or curl it. Your imagination is the only limit!

PIG18509PIG18609PIG18611PIG18714

FORM THIS FUNNEL TO ANY SHAPE $11.95$27.69$39.83$39.67

9” X 4-3/4”14-1/2” X 6-1/2”29” X 5”22” x 8-3/4”

CFI428GR1-1/2 QT Bowl13-1/4” OL Length1-1/8” Diameter SpoutGreen Color

CFI4151-1/2 QT Bowl17” OL Length9/16” Diameter SpoutBright Red Color

CFI438R1-2/3 QT Bowl14-1/4” OL Length1-3/8” Diameter SpoutDark Red Color

CFI420Y1-1/2 QT Bowl14-1/4” OL Length3/4” Diameter SpoutYellow Color

CFI1151 Pint Bowl8-3/4” OL Length9/16” Diameter SpoutOrange Color

Caps on top and bottom to keep it dirt free

$7.95

$7.95


$7.95


$7.95


$7.95



$7.95CFI315B1-1/4 QT Bowl13-1/2” OL Length9/16” Dia SpoutBlue Color

LD81026110” Diameter Drain funnel screws

securely into 2” drum or tank open-ing. 3.5 Quart capacity

$29.36

Lisle Spill Free Funnel

4 adapters fit most cars and light trucks

L24610$27.12

Galvanized steel offset funnel 6 quart capacity Has a rolled edge, high, and splash-proof rim A grooved spout for air-venting Spout opening 1-1/8 inches Comes complete with stainless steel strainer

LX1706$19.23

CREEPERS AND SERVICE CARTS

OIL FUNNELLS AND ABSORBENT MATS

L93032 Yellow L92032 Red

PLASTIC CREEPERNow with 4” Pop In

Wheels for smooth ride on ruff surfaces

$108.38 Each42” Padded Low

Profile Steel Creeper

1” Rugged steel tube constructionOversize frame for added comfort Tapered frame and head rest for extra clearance in tight areas 3-1/2” Heavy duty chrome finished casters with rubber tread 5- Position stick shift headrest adjustment system

$194.25

Deluxe CreeperSX8515

A fully padded creeper on a 42” tubular steel frame. Pad is made of heavy-duty vinyl and offers maximum comfort. Comes with four 2” ball bearing wheels.

L96302 $86.33

40” Plastic Creeper 6 caster

BGW85008Hydraulic Rolling

Creeper Seat

$43.89

$90.65SX8511

$33.75BGW85007

Z-FRAME CREEPER SEATWITH 11-1/2 X 12-1/2

TOOL TRAY

Side Work BenchEasily attaches to the side shelf of

any cart or tool boxFolds down when not in use

Work area is 14” x 16”

SX8004 $30.53 SX8003SC

Economy Service Cart350 Lbs capacity

4” Wheels3” Deep Shelves

Wgt 37.5 lbs

$101.78

Service Cart350 Lbs capacity

4” Wheels3” Deep Shelves

Wgt 43 lbs

$135.05SX8005SC

Steel frame construction Extra thick seat cushion 3 drawer toolbox Front & back tool trays Four 3 in. polyvinyl chloride, oil resistant,

full bearing casters for easy movement

U.S. design patent No.D586,132Specifications: Capacity: 450 lb. Dimensions (L x W x H): 18-1/4 x 14-1/8-18-7/8 in.

Omega PL92450 450 Lb Capacity Tool Box Creeper

$105.82

100% American! Huge 5" wheels go where other

creeper seats can't! Huge 29" x 32" base

keeps you from tipping over! 350 lb capac-

ity Best warranty in the creeper industry! (Lim-ited lifetime on wheels, limited 1 year on body):

BRCR5031

$159.95

TAIL BONE MECHANICS SEAT12” between floor and seat • 5 1/8” diameter wheels • 350 lb. capacity • Stable tripod base•

BONE RUFF RIDER CREEPER

100% American! Huge 5” wheels go where other creepers can’t! Lowest

creeper on the market! Will not tip you over! 400 lb ca-pacity Best warranty in the creeper industry! (Limited lifetime on wheels, limited

1 year on body):

BRCR7031$189.95

BONE CREEPER

BRCR60315” Wheels that Roll Over Everything 300

Lb Capacity

$159.95

Service Cart w/Locking Top & Locking Drawer-Red

350 Lbs capacity 3” Deep Shelves

4” Wheels2 Locking 2 Standard

Chrome 16 Guage Steel FrameShipping Weight 70 Lbs.

SX8013A

$246.05

FR901Meter Kit for AC

and DC Pump Products6 to 40 gpm•4 wheel resetable •totalizer999.9 Gallons•1” Inlet - Outlet•

$247.23

FR1210G12 V DC Rotary Vane

Pump 15 Gal per minute2 year warranty1/4 Hp Motor20 amp draw1” Inlet - 3/4” OutletTelescope pipe 22” to 40”3/4” x 12’ hose18’ Battery Cable

FR4210G12 V DC High Flow Pump

20 Gal per minute1/4 Hp Motor22 amp draw1” Inlet - 1” Outlet30 Minute Duty Cycle1” x 12’ hose18’ Battery CableTelescoping Steel Suction

Tube2 Year Warranty

FR700V115 V High Flow

Pump20 gal per minute

1/3 Hp Motor3/4” x 12’ hose

1” Inlet - 3/4” outletSuction Tube Not

Included2 Year warranty

$541.36

FRSD602G115 V Standard Pump

13 gal per minute1/4 Hp Motor1.5 amp3/4” x 10’ hose1” Inlet - 3/4” outletPolymer Suction Tube1 Year Warranty

$332.41

FR807CMKMeter Kit for AC and DC

Pump Products5 to 20 gpm3 wheel resetable totalizer99.9 Gallons

3/4” Inlet - Outlet

$187.17

FRSD1202G1/4 HP13 GAL PER MINUTE30 Minute duty cycle1” x 28” Barrel Pipe1” In / 3/4” Out3/4” x 10’ hose15’ Battery Cable

FR610G115 V Standard

Pump15 gal per minute1/4 Hp Motor22-42” pipe3/4” x 12’ hose1” Inlet - 3/4” outletTelescoping Steel Suction Tube2 Year Warranty

$388.34

RED FILL RITE AUTOMATIC NOZZLESFRN075UAU10 FOR

3/4” LOW FLOW PUMPS$73.59

GREEN FILL RITE AUTOMATIC NOZZLESFRN100DAU10 FOR

1” HIGH FLOW PUMPS

$89.89

12 VOLT FUEL TRANSFER FILL RITE PUMPS

115 Volt Fuel Transfer Pumps

$286.83

FR310VN115/230 VOLT

Pump only35 Gallons per Minute3/4 Hp MotorCast Iron ConstructionSelf Priming2” thread bung for tank openings

DIESEL FUEL ONLY

$972.99

EXTRA HI FLOW PUMPS

FR4210GBFQ12V

High Flow16.6 gal per minute1/4 Hp Motor22 amp20’x1” Hose1” Inlet -1” OutletOutperformsmosthigh-flowfuel transfer pumpsbattery cable for proper grounding and safe fueling. 1in. steel telescoping suction pipe. Fuel tank not included

$731.29


Quick Fill Pump

2 Year Warranty

FR311VN115/230 VOLT

Pump and liter meter only30 Gallons per Minute3/4 Hp MotorHeavy duty Cast Iron ConstructionSelf Priming2” thread bung for tank openings

DIESEL FUEL ONLY

$1116.54

$339.44

FR1200KTF7018Particulate Filter Kit (Includes Filter Head,

Filter Canister, 3/4” x 7” Galvanized Nipple) 3/4” Street Elbow NPT

FITS ALL PRODUCTS WITH 3/4” OUTLET

$44.24

FRF1810PM0Particulate Filter Canister 18 GPM 10

MICRON

Fitstheabovefilter$15.28

FRF1810PC1Particulate Filter Kit w/Drain Valve

Includes Filter Head, Canister, and Filter

FITS ALL PRODUCTS WITH 1” OUTLET

$51.41

FR1200R9146Replacement Element for

FRF1810PC1

$13.00

$418.30

2 Year Warranty 2 Year Warranty

FR3210B12 V DC High Flow Pump

25 Gal per minute1/2 Hp MotorUltra High Flow Nozzle1-1/4” Inlet - 1” Outlet30 Minute Duty Cycle1” x 18’ hose20’ 10 GA Battery Cable2 Year WarrantySelf Priming up to 2’ lift Diesel, Gas, Kerosene, E15,

Bio Diesel up to B20

$783.35

1” ULTRA HI-FLOW NOZZLEFRN100DAU13 FOR

1” HIGH FLOW PUMPS

$116.62

FR1118A10In-Line Digital Meter

Flow Rate 2-25 gpm * 1” InletMax 50 psi * +/- 1% accuracy

Five-didgit readout with resettable totalizer

Install either in line or at the end of the delivery hose

*Diesel or Kerosene Only*

$99.00


DIESEL FUEL TRANSER--GAS REQUIRES STATIC HOSESCOXREELS DEF Series are equipped with a stainless steel external flow swivel and chemical resistant Vition seals to provide a safe, reliable Diesal Exhaust Fluid (DEF) dispensing solution. The swivel is easy to access for simple seal maintenance and fast DEF dispencer hose instal-lation. The supreame-duty dual pedestal (T Series) configuration’s versatile design is outfitted with Coxreels’ origional Super Hub dual axle support system to increase stability and reduce vibration during operation.

COXTSHN550DFBBX 3/4” x 50ft 91 Lbs. 300ITEM NUMBER HOSE SIZE WEIGHT PSI PRICE

$965.51

DEF-T SERIES MODEL

FUEL HOSE SH SERIES

COXREELS Fuel Dispencing Reels are designed to handle various non-aromatic fuel applications including diesel, kerosene, fuel oil and heating oil. Coxreels professional fuel dispencing reels are avalible in heavy-duty single pedestal (SH Series), supreme-duty dual pedestal (T Series) or box-style frame (SP Series) configurations. These fuel reels are an essential component found in utility, ground support, and bulk liquid handling transport services mounted on fuel storage & dispencing sys-tems, fuel/lube trucks, aircraft refuelers, and tank trucks. The convenient uncoiling systems with the added hose control allow the operator to efficently handle fuel transfers.

COXSHFN525 3/4” x 25ft 57 Lbs. 300 $455.91

FUEL HOSE T SERIES

COXTSHFN550 3/4” x 50ft 91 Lbs. 300300300300

$692.51$952.77$769.86$889.07

105 Lbs.95 Lbs.

101 Lbs.

3/4” x 75ft1” x 35ft1” x 50ft

COXTSHFN575COXTSHFN635COXTSHFN650

FUEL HOSE SP SERIES

COXSLPF550COXSLPF650

3/4” x 50ft1” x 50ft

107 Lbs.142 Lbs.

300300

$799.89$1,008.28

DEF & FUELING SERIES REEL SPECIFICATIONS

DEF SERIES SWIVELNon-corrosive stainless steel 90 degrees full flow NPT swivel for Diesel Exhaust Fluid (DEF) dispencing applications.Swivel seals: VitonDEF SERIES HOSEDEF dispencing hose designed to convey the high-purity, aqueous urea solution DEF. Temperature Range: -40 F to +257 FFUEL SERIES SWIVELMachined from solid brass 90degrees full-flow NPT swivel inlet for fuel dispencing applica-tions. Electroless nickel plated steel swivel on 1” modelsSwivel seals: NitrileFUEL SERIES HOSEFuel dispencing hose designed to convey non-aromatic fuels including diesel, kerosene, fuel oil & heating oil.Temperature Range: -20 F to +190 F

Each one of these reels is built of their standard series with their own unique features & benifits

DESIGN & STRUCTURE

SIGNATURE FEATURESProfessional grade heavy duty steel constructionDurable propriety CPC powder coat processRolled edges & ribbed discs provide strength & safteyLeading 2-year manufacturer’s limited warrantyMade in the USA-Sold & Supported WorldwidePOSSIBLE FIELDS OF APPLICATIONVehicle RefuelingTank TrucksFuel/Lube TrucksFuel Storage & Dispensing Systems

DEF Storage & Dispencing SystemsAircraft RefuelingMarine/Ship Refueling/Offshore

ITEM NUMBER HOSE SIZE WEIGHT PSI PRICE



Deminsions COXTSHN550DFBBX=9 7/8” W, 25 1/2” H, 24”L COXSHFN525= 9 3/8” W, 25 1/2” H, 19 1/2”L

Deminsions COXTSHFN550=9 7/8” W, 25 1/2” H, 24”L

COXTSHFN575=12” W, 25 1/2” H, 24” L COXTSHFN635=10” W, 25 1/2” H, 24” L COXTSHFN650=12” W, 25 1/2” H, 24” L

Deminsions COXSLPF550=19 5/8” W, 20 1/2” H, 22 7/8” L

COXSLPF650= 19 5/8” W, 24 1/2” H, 26 3/8” L

OIL TRANSFER

COXTMP-N-4501/2” X 50’ High Pressure

reel with oil hose

$551.46

COXTMP-N-475same only 75’ long

other sizes available

$679.77

GUARDIAN/LINCOLN FLEX-IBLE OIL SPOUT CAN

Thumb operated valveflip action locks valve open14” flexible spoutrecessed bottom drains fully

G524 4 QTSG525 5 QTSG528 8 QTS

$26.40$29.37$31.02


OIL PUMP TRANSFER SYSTEMTYPE: AIR OPERATED• AIR MOTOR SIZE (IN.): 2.5• PUMP RATIO: 5:1• OUNCES PER STROKE: 2.08• CONTAINER SIZE: 250/275 GAL.• CONSUMPTION @ 100 PSI: 14 CFM• WORKING FLOW MAX. (GPM): 6• MIN. AIR INLET PRESSURE: 40• MAX. AIR INLET PSI: 200• OUTLET PRESSUER MAX. (PSI): 1000• AIR INLET (IN.): 1/4 NPT• OUTLET SIZE: 1/2” NPT• FLUID INLET THREAD (IN.): 1 NPT•

PUMP FOR MULTIPLE OUTLETS: YES•

INCLUDES: BUNG BUSHING, UNIVERSAL • SUCTION TUBE WITH FOOT VALVE, OIL HOSE REEL WITH CONNECTING HOSE AND ELECTRONIC METER

Compact, high flow, dual ac-tion design delivers up to 20

GPM per 100 strokes. Ideal for oil, gasoline, etc 3/4” x 8’ Hose

2” Tank AdapterPump May Be Padlocked

$159.87

FR152

Close tolerance pump uses brass piston that resists wear. Pumps motor oil,

transmission fluid, gear oil, engine cool-ant and other non corrosive.

16 to 55 gal telescoping tube with 2” bung hole. Provides 8.5 fluid oz per stroke. Internal check valve for con-

stant prime. Includes 6’ delivery hose with nozzle, hose hanger and manual.

$69.30LIN1335

LING401LEVER ACTION BARREL PUMP

Lever Pump for Mo-tor oil, oils, soaps, solvents, thinners5-30 GAL DRUM.

10 OZ PER STROKE with bung adapter

LING402ROTARY BARREL

PUMPRotary Pump for

diesel fuel, thinner, motor oil, transmis-

sion fluid1 GAL PER 18 REVOLUTIONLING400

Lever Action Bucket PumpFits 25-50 Lb container 12” drum cover and 4’ delivery hose. Perfect for transmis-sion fluid, oils, or heavier

fluids.$60.89$30.53

LIN94354Heavy Duty Medium Pressure

1/2” x 50’ Oil Hose Reel

$542.85Great for mobile service ap-plications. Medium pressure fully ported swivel provides unrestricked flow for higher vol-umes of fluid. Top of the line

LX1524 1 QT 15.87LX1526 2 QT 17.10LX1528 4 QT 19.74

GalvanizedCan with flex spout

18 Gallon Capacity• Preset air regulator• 14” -- 2-1/2” Gallon • BowlTelescopes 45” to • 72”Includes Safety • ValveAll Steel Design• Reinforced axles•

LIN3601$199.95

LIN1340Lever Action Barrel PumpExtended pump body improves top-of-barrel clearance while excellent flow per stroke

For Antifreeze and thin-• ner solvents 14.0 FL Oz per strokeRemovable non drip • spout allow for threaded hose connectionTelescoping pickup tube • for 16 to 55 gal drumsFits both Bucket or • Barrel bung holes.

$47.19

OIL PUMP TRANSFER SYSTEMTYPE: AIR-OPERATED• AIR MOTOR SIZE (IN.): 2• PUMP RATIO: 3:1• OUNCES PER STROKE: 2.08• CONTAINER SIZE: 250/275 GAL• CONSUMPTION @ 100 PSI: 11CFM• WORKING FLOW MAS. (GPM): 6• MIN. AIR INLET PRESSURE: 40• MAX. AIR INLET PSI: 200• OUTLET PRESSURE MAX (PSI): 600• AIR INLET (IN.): 1/4 NPT• OUTLET SIZE: 1/2” NPT• FLUID INLET THREAD (IN.): 1 NPT• PUMP FOR MULTIPLE OUTLETS: YES• INCLUDES: UNIVERSAL SUCTION TUBE • KIT, AIR/LUBRICANT HOSE AND BUNG BUSHING WEIGHT: 29.00•

LIN4283 $1707.94

LIN284168

$779.37

$34.16

USED OIL RECEIVER

LIN3614$499.95

PRESSURIZED USED OIL RECEIVER

20 Gallon Capacity• Preset air regulator• 18” Offset Bowl• Telescopes 44” to • 72” Bowl HeightIncludes Safety • ValveHeavy Gauge Steel • ConstructionSite gauge •

50:1 Air Operated•Double Action Grease Pump•25TO50LBRefineryContaineror•BucketIncludes cover,follower •plate,7’ hose,nipple,740 valve,coupler,swivel, & universal swivelBUCKETandBaseNOTINCLUDED•

40:1 Air Operated •Single Action Grease Pump•25to50Lb.RefineryContaineror•bucketIncludes cover, 7’ hose, hose con-•nector, nipple, HP valve, coupler and swivel.

LIN6917$719.74

For 120 Lb drum

50:1 Air Operated •Double Action Grease Pump•45 oz grease per min at 150 psi•Height 43-1/8” with 120 lb drum•Includes cover & 17” base w/wheels •follower plate,7’ hose,nipple,740 valve, coupler, swivel, & universal swivelDrum not included.•

LIN4489$645.62

FOLLOWERPLATEINCLUDED

Buzzard Gulch,Inc. 800-821-2932 Catalog T Page #105

LIN917$941.08For 120 Lb

Drum

LD95000855 Gallon 420 Lb Drum

Dolly$108.98

LIN81387Universal High

Pressure Swivel1/2”-27NPT(m)X

1/4”NPT(m)$61.38

LIN83594Universal High

Pressure Swivel1/4”NPT(m)X1/4”NPT(m)$73.89

LD12072THeavyDutyHighPressure•Nozzle7500 psi max pressure•Inlet 1/4” npt•Outlet 1/8” npt•

$76.78

GREASEGUNFILLERPUMPFORBULKFILLINGGREASEGUNS

FITS25-50LBBUCKETS.INCLUDESFOLLOWERPLATE,COVER

ANDADAPTER

LING404$57.63BUCKET

GREASE

1/4”X50’High•Pressure Auto Rewind Hose Reel For •grease5000 psi•9-1/4Wide,21-3/16”tallx19-5/8”•Hose Included•Weight64lbs•

COXHPN-150$495.95

Other Sizes Available

50:1 Air Operated •Double Action Grease Pump•80Cuinperminute•Includescover&17”dollyw/wheels•follower plate,7’ hose,nipple,740 valve, coupler, swivel, & universal swivelDrum not included•

GreaseSystem,120lb.Stationarywith Jumper Hose and Filter Regulator60:1Pump

DrumCoverFollower Plate 1/4"x6'HighPressureHose3/8"x6'AirHoseFilter Regulator w/ gauge

LD13062T-S1$659.40

For 120 Lb Drum

BUCKET

50:1 Air Operated •80Cuinperminat150psi•Includes: drum cover, follower •plate, 7’ hose, nipple, control valve, coupler, straight swivel, & universal swivel

LIN9989$808.36

For 25-50 Lb Portable

LIN989$838.32

LD9500075 Gallon 35 LbBucketDolly

$49.21

LGGCB-12GREASETUBEANDCAULKSTORAGEBOX

$21.61

LIN740HeavyDutyHighPressure•Nozzle7500 psi max pressure•Inlet 1/4” npt•outlet 1/8” npt•

$119.63

HIGHPRESSUREPUMPFITS25-50LBBUCKETS.

2500 PSI5’ Hose

Follower Plate.303 Oz/per stroke

INCLUDESFOLLOWERPLATE,COVERANDADAPTER

LIN1292$252.98

NEWALEMITEGREASEFITTING/JOINTCLEANER

Opens clogged grease fittingsandjointsCleansandreplenishesoldanddrygreasefittingsSaves the time and expense ofreplacingacloggedfittingand / or bearing

ALE339841$54.91

CleansGreaseFittings

1. Put solventintocylinder2. Replace Piston Place Tool on Fitting3. Tap Piston

GB-1 $34.50GREASE BUSTER

MADE IN THE USA

LIN5805IMPACT FITTING CLEANER

$35.97••

Clearshardenedgreasefromfittingsandjoints•Eliminatestheneedtotakeapartorreplacefittings•Forceslightoilthroughcloggedlubepoints•

Includes:SteelDriveCylinder•HardenedPiston•Safetyshield•High-PressureHoseforHardtoaccessfittings•Sparedriveseals•Lincoln5852Coupler•

BUZZARDGULCHINC

[email protected].

com

1/4”X50’High•High Pressure Auto Rewind Hose Reel •For grease5000 psi•6.59”Wide,20.69”tall•Hose Included•

LIN94552$511.56

Other Sizes Available

HOSES AND COUPLERS ARE LISTED ON PAGE

#107

LINCOLN

Lincoln BatteriesLIN1201LIN1401LIN1801LIN1861LIN1871

12 V Nicad14.4 V Nicad18 V Nicad18 V Lithium Ion20 V Lithium Ion

ALE339804ALE339992

12 V Nicad14.4 V Nicad

110 V WALL CHARGER

LIN1210LIN1410LIN1410LIN1850LIN1870

ALE339803ALE339989

12 V14.4 V

$48.99$48.99

12 Volt CIGARETTE CHARGER

LIN1215LIN1815ALIN1815ALIN1855A

ALE339997ALE339998

12 V14.4 V

$45.69$46.71

CORDLESS GREASE GUN ACCESSORIES - PARTS

ALE340916ALE340916ALE343154ALE343289

12 V14.4 V18 V20 V

$45.69$45.69$51.13$48.11

ALE340913ALE340913ALE343152ALE343290

12 V14.4 V18 V 20 V

$48.05$48.05$67.32$43.66

Batteries (Current Style) Top Post

ALE340911ALE340912ALE343151ALE343291

12 V NICAD14.4 V NICAD18 V LITHIUM-ION20 V

$86.25$106.76$148.10$79.65

MILWAUKEE ALEMITE

12 Volt Milwaukee Grease GunM2446-20

Requires M12 System. Chargers and Batteries are shown

on page # 65. You can choose what amp Hr battery or which

charger you want as long as it is M12. Over 40 tools are available with this system. Call for quotes

on any you do not find on page 66


1 YearWarranty

Ni Cd Batteries (Old Style) Side Post

$86.25 $108.82

Wall Charger (Current Style)

Wall Charger (Old Style)

Chargers (Current Styles)(Cigarette Lighter)

Chargers (Old Style)(Cigarette Lighter)

1 YearWarranty

$76.73$77.55$80.85

$135.30$80.85

12 V Nicad14.4 V Nicad18 V Nicad18 V Lithium Ion20 V Lithium Ion

$44.83$47.07$47.07$65.70$47.82

12 V Nicad14.4 V Nicad18 V Nicad18 V Lithium Ion

$40.26 $46.86 $46.86 $57.75

PARTS THAT FIT ALL LINCOLNCORDLESS GREASE GUNS

LIN93485LIN271882LIN260337LIN271885

Follower AssemblyComplete grease tubePlunger - In blockCheck Ball Kit

$11.58 $32.58

$1.98 $8.95

PARTS FOR LINCOLN 1200 SERIES ONLY

LIN260327LIN260331LIN260316LIN260317LIN260332LIN260339LIN271883

Right HandleLeft HandleMotor Housing Cover12 Volt Motor OnlyTrigger OnlyComplete Gear SetRelief Valve Kit

$4.14 $4.14 $5.88 $33.56 $14.25 $49.32 $30.06

ALEMITE * NEW STYLESHave a -1 behind Model # on 12V & 14.4V - NICAD

18 Volt Milwaukee Grease GunM2646-20

Requires M18 System. Chargers and Batteries are shown

on page # 65. You can choose what amp Hr battery or which

charger you want as long as it is M18

Over 100 M18 tools are avail-able to use with this M18 System including the new Fuel brushless

series. Call for quote on ones that your cannot find on page # 66


LIN286095LIN286103LIN286404

Trigger KitMotor w/PlatePump with Handles

$6.80 $23.86 $93.00

14.4 Handles Only--requires Series A,B, or C To order correct housing


LIN286215LIN286221LIN286404

Trigger KitMotor w/PlatePump with Handles

$6.80 $23.86 $93.00

PARTS FOR ALEMITE 14.4 SERIES ONLY

ALE393756-2ALE393756-17ALE393756-16

Trigger KitMotor w/ClipsHandles

$7.99 $47.21 $35.99800-821-2932

LINCOLN * For parts we need Model # & Series #

on 12V-14.4V & 18V NICAD

LIN5858 Flexible & Rigid Extension Adapter. 5000 psi. Allows operator to switch from flexible to rigid exten-sion with one hand.

13” long


MI12MI18MI24MI36

12” Hose H.D.18” Hose H.D.24” Hose H.D.36” Hose H.D.

$9.56$11.10$12.25$15.26

LIN58487500 PSI

360 degree swivel8-45 degree positions

$46.47

LIN5849 LIN5848 swivel with 2” extension tube and

locking sleeve

$50.58

LIN5803 Use for flush type or hard to reach hydraulic fittings

$10.23

LING905Tapping & Removal of

1/8” Zerks

$12.21

LING904Tapping & Removal of

1/4-24” Zerks

$11.90

LX1404Silver 90 Degree Grease Coupler

$12.20

LIN11485 Straight Zerk Driver

$19.20

LING902Seal Off Adapter w/Rubber Tip

$5.49

LUB05-050180 Degree Angle

Coupler. Lock onto any angle up to 180 degrees. 3000 psi,

8” long $18.13

LING901

4” Needle Nozzle

For those hard to reach

places on equipment

etc.

$12.64

LING160Grease Gun Holder

$6.35

LIN588390 Degree Angle

CouplerProvides access to dif-ficult to reach fittings

$7.77

Lincoln’s 7 Pc. Heavy Duty Lube

Accessory KitLIN58000

Press On 90 Degree couplerStraight Extension (U-Joints)12” Hose ExtensionSlide on 90 Degree Coupler (locks on)Rubber Tip Nozzle (grease plugs)Needle Nozzle (Hydraulic type fittings)360 Degree Coupler (full swivel 2” tube)

$98.67

ALE34006736” Grease Hose

Assembly for 12 V & 144 Volt Alemite Cordless

$35.93

LIN1100CLRClear Grease tube for posi-• tive grease identificationFits all Lincoln• Shows air pockets and • how much grease is left in tube

$36.19

LIN816061/8” X 1/8” Lin-coln 360 Degree 4500 psi Swival

$16.74

LIN911081/8” NPT(M)

Filler Nipple use with LIN80133

5.00

LX1406Silver 360 Degree

Swivel Grease Coupler

$14.11

$33.12

Filler Socket Assembly

LIN80133Use with

LIN91108 for bulk filling

3/8” NPT(F)

$36.56

LIN5807$9.81

Flexible-Line, Quick-Connect Grease Injection

14-37-030036” 8000 psi Cordless Mil-

waukee 12/18V Hose

$21.0349-16-2647

48” 10,000 psi for 12/18V

$30.53

ALE339820Alemite Canister12v - 14.4v - 18v

$19.02

ALEB3067401/8” Out Loader

Fitting12v - 14.4v - 18v

$5.90

ALEB3226101/4” Out Loader

Fitting12v - 14.4v - 18v

$7.66

ALE306741Loader Coupler 3/8” for Loader Pump

$24.03

LIN1218LIN1224LIN1230LIN1236

18” Hose H.D.24” Hose H.D.30” Hose H.D.36” Hose H.D.

27.23 31.14 32.56 37.00

LIN5852LIN5852-5LIN5852-54ALE308730ALE308730ALING300MIGG701BCMIGG701BC-5LGL2010CTA7760

LINCOLNLINCOLNLINCOLNALEMITEALEMITEGUARDIANMIZEMIZELEGACYCTA

6000 6000 6000 10,000 10,000 6,000 6,000 6,000 6,000 3,000

3 333334444

$5.46 $18.74 $172.44 $7.83 $8.10 $3.83 $6.60 $25.00 $3.33 $2.48

LIN5845ALE6304-BLING310LGL2015

LINCOLNALEMITEGUARDIANLEGACY

6,00010,0006,00010,000

3 3 3 4

$11.29 $12.21 $5.49 $6.36

STANDARD SIZE GREASE GUN COUPLERS FOR ALL GREASE GUNS 1/8” NPT

PART # BRAND PSI JAW COST1 5 54 1 1 1 1 5 1 1

PACK

PART # BRAND PSI JAW COSTPACK1111

HEAVY DUTY GREASE GUN COUPLERS FOR ALL GREASE GUNS 1/8” NPT

42-90-070049-16-2649

MILWAUKEEMILWAUKEE

8,00010,000

4 4

$4.22 $12.95

PART # BRAND PSI JAW COSTPACK12

MILWAUKEE BRAND GREASE GUN COUPLER FOR MILWAUKEE CORDLESS GREASE GUNS

REPLACEMENT HOSES FOR LINCOLN CORDLESS

GREASE

REPLACEMENT RUBBER HOSES FOR MANUAL GREASE GUNS

Batteries---Chargers---Parts Sold on page 106

LINCOLN -- LINCOLN INDUSTRIAL -- LINCOLN

LIN 1244TWO 12 Volt Batteries

1 HOUR CHARGER•30” GREASE GUN HOSE•1 YEAR WARRANTY•IN PLASTIC CASE•6000 PSI PRESSURE•1/2 TO 3 TUBES •PER CHARGE•

$189.95

14.4 VOLT LINCOLN

$239.95LIN 1444

TWO 14.4 Volt Batteries1 HOUR CHARGER•30” GREASE GUN HOSE•1 YEAR WARRANTY•IN PLASTIC CASE•10,000 PSI PRESSURE (7500 •Working)3-6 TUBES PER CHARGE•

COMES WITH CASE-CHARGER-BATTERY-

GUN-HOSE

COMES WITH CASE-CHARGER-

BATERY-GUN-HOSE

LIN 1242ONE 12 Volt Battery

1 HOUR CHARGER•30” GREASE GUN HOSE•1 YEAR WARRANTY•IN PLASTIC CASE•6000 PSI PRESSURE•1/2 TO 3 TUBES •PER CHARGE•

$159.95

LIN 1442ONE 14.4 Volt Battery

1 HOUR CHARGER•30” GREASE GUN HOSE•1 YEAR WARRANTY•IN PLASTIC CASE•10,000 PSI PRESSURE (7500 •Working)3-6 TUBES PER CHARGE•


2 speed with faster grease delivery and yet pulses for accuracy


1 HOUR CHARGER•30” GREASE GUN HOSE•1 YEAR WARRANTY•IN PLASTIC CASE•10,000 PSI PRESSURE (7500 •Working)8-10 TUBES PER CHARGE •

$259.95

LIN 1842ONE 18 Volt Battery

1 HOUR CHARGER•30” GREASE GUN HOSE•1 YEAR WARRANTY•IN PLASTIC CASE•10,000 PSI PRESSURE (7500 •Working)8-10 TUBES PER CHARGE•

$219.95


LIN 1862 Specifications:

36” hose with spring guard •LED - lights up when under equip-•ment or shaded areas Dual Motor Protection includes •self-resetting thermocoupler Two-speed design delivers out-•standingflowandpressureLCDFlowMeterDisplays:Grease•Output, Grease Cartridge Level, Battery Charge Level 18 Volt high-amperage lithium •ion battery provides outstanding run time Includes a Heavy Duty Carrying •Case One hour fast charger rapidly •charges the 3.0 amp batteries. 7,500 psi working output pres-•sure 9 oz /min. grease output @ •1,000 psi

This product contains 1 lithium ion battery

$289.95

LIN 1864 Specifications:

36” hose with spring guard •LED - lights up when under •equipment or shaded areas Dual Motor Protection includes •self-resetting thermocoupler Two-speed design delivers out-•standingflowandpressureLCDFlowMeterDisplays:Grease•Output, Grease Cartridge Level, Battery Charge Level 18 Volt high-amperage lithium •ion battery provides outstanding run time Includes a Heavy Duty Carrying •Case One hour fast charger rapidly •charges the 3.0 amp batteries. 7,500 psi working output •pressure 9 oz /min. grease output @ •1,000 psi

This product contains 2 lithium ion batteries

$339.95


LIN 1882ONE 20 Volt Battery1 HOUR CHARGER•36” GREASE GUN •HOSE1 YEAR WARRANTY•IN PLASTIC CASE•10,000 PSI PRESSURE •(7500 Working)8-10 TUBES PER •CHARGE

$249.95


1 HOUR CHARGER•36” GREASE GUN •HOSE1 YEAR WARRANTY•IN PLASTIC CASE•10,000 PSI PRESSURE •(7500 Working)8-10 TUBES PER •CHARGE

$289.95CHECK FOR SALE PRICES AS THESE ARE ALWAYS ON SALE

$209.95

MOST REQUESTED ALEMITE ACCESSORIES

6,500 psi3 Way Loading

3’ Hose5.6 oz / min @ 1000 psi delivery stroke

1 Hour ChargerDelivers up to 3 Cartridges of Grease

1 Year Warranty

CORDLESS ALEMITE GREASE GUNS


ALE575B-112 Volt Alemite

Case/Charger/2 BatteriesGun & 36” Hose

$239.95


3’ Hose5.6 oz / min @ 1000 psi delivery stroke


1 Year Warranty

BATTERIES AND

CHARGERS SOLD ON

PAGE # 106

ALE575A-112 Volt Alemite

Case/Charger/1 BatteryGun & 36” Hose

$189.95

CALL FOR SALE

PRICES ON CORDLESS ALEMITE

ALE595B18 V Alemite

Case/Charger2 Lithium- IonBatteries

Gun & 36” Hose

$399.95

ALE595A18 V Alemite

Case/Charger1 Lithium- IonBattery

Gun & 36” Hose

$349.95

ALE585A-114.4 Volt AlemiteCase/Charger/1 Battery

Gun & 36” Hose

$209.95

ALE585B-114.4 Volt AlemiteCase/Charger/2 Batteries

Gun & 36” Hose

$259.95

ALE340338Relief Valve For Alemite Grease Guns

12v - 14.4v - 18v$28.45

ALE393756-6Check Valve Repair Kit

12v - 14.4v - 18v$7.79

ALE339812Shoulder Carrying Strap

12v - 14.4v - 18v$11.99


3’ Hose6 oz / min @ 1000 psi delivery stroke


1 Year Warranty

ALE596A20 V Alemite

Case/Charger1 Lithium- IonBattery

Gun & 36” Hose

$249.95

ALE596B20 V Alemite

Case/Charger2 Lithium- IonBatteries

Gun & 36” Hose

$289.95


3’ Hose2 Speed: High 6 oz, Low 4 oz


1 Year Warranty

MILWAUKEE CORDLESS GREASE GUNS

M12 Lithium-Ion Cordless Grease Gun

8000 psi Operating Pressure•Up to 7 cartridges per charge•3 Way loading (cartridge, bulk or •suction)14 Oz cartridges or 16 Oz bulk•36” Hose•Superior handle balance and ergo-•nomicsWeight 7.2 lbs•Compatable with over 20 M12 •tools5 Year Warranty•

Contains:12 Volt Grease Gun•1 - 12 volt Battery 48-11-2402 •3 Yr warranty 3 amp hrCharger 48-59-2401 (wall 115 v)•Case•

MIL2446-21XC$229.95

42-90-0700 COUPLER FITS 1/8” NPT49-16-2649 2PK COUPER FITS 1/8” NPT14-37-0300 36” HOSE FITS ONLY MILWAUKEE GREASE GUNS49-16-2647 48” HOSE FITS ONLY MILWAUKEE GREASE GUNS

MIL2446-20Grease Gun Only

$136.50

M18 Lithium-Ion Cordless Grease Gun

10,000 psi Operating Pressure•2 speed for max pressure and •speedPresent Grease Counter-Shut Off•14 Oz cartridges or 16 Oz bulk•48” Hose•Lock On Lock Off Trigger•Weight 8.5 lbs•Compatable with over 40 M18 •tools5 Year Warranty•

MIL2646-20Grease Gun Only

$191.10

$4.22 $12.95 $21.03 $30.53

2646-202646-21CT2646-22CT2646-21XX2646-21XY2646-21CX

BARE TOOTHIN BAT2 THINTHICK BAT2 THICK1 EACH

NO BATTERIES48-11-181548-11-181548-11-182848-11-18281828-1815

NONE1.5 AMP1.5 AMP3 AMP3 AMP1.5 AMP

MIL2646-22CT18 Volt Grease Gun 2646-20•2 - 18 volt Battery 48-11-1815 •2 Yr warranty 1.5 amp hrCharger 48-59-1812 (wall 115 v)•Case•


$191.10$275.60$331.50$341.90$481.00$414.70

CHOOSE YOUR KIT WISELY. THIS UNIT USES ALL M18 BATTERIES, BUT WHICH DO YOU NEED FOR YOUR OTHER TOOLS? CHECK OUT PAGE 65 AND PAGE 66

TO CHOOSE THE BATTERIES YOU REALLY WANT

LIN1013Lever Lincoln Grease Gun

Full Pressure on Short Strokes Full Pressure on 1/4” Stroke

3 Way Loading

$40.76

LIN1133Pistol Lincoln Grease Gun

6000 psiI oz per 33 strokes18” whip hose and

coupler

$42.49

LIN11347500 psi vari stroke high

pressure, high volume

pistol grease gun

$46.45

Both Metal and Flex

Hose


I oz per 33 strokes6” Metal extension with coupler

$26.86


I oz per 33 strokesVar stroke/var pressure

short stroke high pressurelow stroke low pressure

6” Metal extension with coupler

$34.17

LIN1162 Lincoln Air Grease Gun

40:1 Pressure ratio

60-150 psiContinuous pump

$97.85

AIR

LING100Lever Lincoln-Guardian Economy Grease Gun

$14.22

LING112Pistol Lincoln-Guardian Economy Grease Gun

$20.78

NEW LOCK & LOAD THREADLESS QUICK CONNECT BARREL

12” Flexible hose4 Jaw Coupler

Automatic BleederVari Stroke

LGL1175L$40.62

NEW LOCK & LOAD THREADLESS QUICK CONNECT BARREL

10,000 PSIDUAL PISTON

Volume mode= 20% more grease (normal greasing)

Boost Mode for High Pressure needs (10,000 psi)

Automatic Bleeder

LGL1185L$127.31

Lock -n- Load Barrel

(Threadless Quick Connect barrel)

10,000 psiVariable Stroke3 Way Loading

1 Oz per 21 strokes18” Rubber Hose


1 Oz per 33 strokes6” Metal Hose


1 Oz per 33 strokes18” Rubber Hose

ALE500E$32.84

ALE555$45.93

ALE555E$49.75

BUZZARD GULCH, INC COMPANY POLICY

13925 W US HWY 136NEW HAMPTON, MO

64471

TERMS: NET 10 DAYS TO ESTABLISHED CUSTOMERS COD ALL MAJOR CREDIT CARDS PAYPAL @ www.paypal.com

PRICES AND We make every effort to assurePRODUCTS that our prices and products are advertised accurately. However in the event of error and price increases we reserve the right to correct it. Manufactures part numbers and pricing change daily.

WARRANTY We honor all Manufacturers warranties

RETURNS: Please call before return (Helps with the paperwork.

TELEPHONE:

FAX ORDERS:

MAIL IN ORDERS:

WEB SITE:

EMAIL:

TIMELY SHIP-MENT:

800-821-2932 8AM TO 6PM Central Time

660-439-2720 7 days a week 24 hrs a day

Order Form Below. Please use shipping chart

www.buzzardgulch.com

[email protected] checked often

Same day service if ordered by noon central time. Shipped via UPS or mail.

Credit Card Number___________________________________Expiration Date__________________ 3 Digit # Back _____Signature_______________________________________________Mastercard, Visa, Discover and American Express

1._________________________________________________________________________________________________________

2._________________________________________________________________________________________________________

3._________________________________________________________________________________________________________

4._________________________________________________________________________________________________________

5._________________________________________________________________________________________________________

Subtotal___________________________

Shipping___________________________

MO Tax_____________________________

Total________________________________

Missouri Residents

Only Tax of 5.475%

QTY ITEM NO.

Page NO. Description Each Total

Name______________________________

Address___________________________

City______________ST______ZIP_____

Phone_____________________________

BUZZARD GULCH, INC. ORDER BLANKSHIP TO IF DIFFERENT

Name______________________________

Address___________________________

City______________ST______ZIP_____

SHIPPING COST IF TOTAL ORDER

$0.00 to $24.99 $25.00 to $99.99$100 to $174.99

$175.00 to $249.99over $250.00

COST$6.82

$10.25$11.75$14.50FREE


800-821-2932BUZZARD GULCH

CATALOG # T


BUZZARD GULCH INCPRSRT STD US POSTAGE

PAIDCOLUMBIA, MO permit No 353

CATALOG T

13925 W US HWY 136NEW HAMPTON MO 64471 800-821-2932FAX 660-439-2720www.buzzardgulch.comemail [email protected] 660-439-2785

King Tony A4103PRBust-A-Bolt 1/2" Drive Ratchet,

Extension Bar and Handle

Take on repairs and projects with this 1/2" Drive Ratchet, Exten-sion Bar and Handle with Foam (A4103PR) from King Tony. At 10" long, the ratchet has a quick re-lease knurl handle.

King Tony KTA2505CR44-Piece SAE-Metric 6PT

1/4" DR Socket Set

44 Piece SAE - Metric 6PT 1/4" DR Socket Set (A2505CR) from King Tony

Kit includes 1/4"Drive Standard Sockets 6pt. 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16"; Standard Sockets 6pt. 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15mm; Deep Sockets 6pt. 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16"; Deep Sockets 6pt. 6, 7, 8, 9, 10, 11, 12, 13, 14, 15mm; Reversible Ratchet 5-1/2"; Extension Bars 2" & 6".

King Tony KTA3005CR47 Piece SAE - Metric 12PT

3/8” Socket Set

47 Piece 3/8" SAE - Metric 12PT Socket Set (A3005CR) from King Tony

KIt includes 3/8"Drive Standard Sockets 12pt1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8"; Standard Sockets 12pt. 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm; Deep Sockets 12pt, 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8"; Deep Sockets 12pt. 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm; Revers-ible Ratchet 8"; Extension Bars 3" & 6".

King Tony KTA4005CR47-Piece SAE - METRIC 12PT

1/2” Socket Set

47-Piece 1/2" SAE + METRIC 12PT Socket Set (A4005CR) from King Tony

KIt includes 1/2" Drive Standard Sockets 12pt. 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8"; Standard Sockets 12pt. 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24mm; Deep Sockets 12pt. 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16"; Deep Sock-ets 12pt. 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm; Reversible Ratchet 10"; Exten-sion Bars 2" and 5".

KTANC4236Q1/2” HEAVY DUTY M7

AIR IMPACT1000 FT LBS TORQUE

0-700 WORKING TOQUETWIN HAMMER

WGT 5.7 LBS2 YEAR WARRANTY

245.70


AIR IMPACT1200 FT LBS TORQUE

200-900 WORKING TOQUE

TWIN HAMMERWGT 5.9 LBS

2 YEAR WARRANTY

$293.80


MINI AIR IMPACT500 FT LBS TORQUE200-350 WORKING

TOQUEWGT 3.3 LBS

2 YEAR WARRANTY

149.50

KTANC83511” HEAVY DUTY M7 AIR IMPACT WITH

8” ANVIL1800 FT LBS TORQUE200-1600 WORKING

TORQUEPINLESS IMPACT

WGT 27.6 LBS

$604.50

51.26

74.95 99.95 189.95COLOR CODED

RED STRIPE--SAE BLUE STRIPE--

METRIC

COLOR CODED RED STRIPE--SAE

BLUE STRIPE--METRIC

COLOR CODED RED STRIPE--SAE

BLUE STRIPE--METRIC

BUZZARD GULCH INC

Documents