Butterfly Valves | Choke Valves | Plug Valves - DChel Valves

Dchel ValvesBrass (C3771)
Gray cast iron (FC200,FC300) Ductile iron castings (FCD-S) Carbon steel castings for high temperature/pressure service (SCPH 2)
Butterfly Valves Manufacturers:- advantages-
Stainless steel body and stem design Sizes from 1 1/2" - 12"
Designed with RTFE coated stainless steel bushings
Stem sealing by utilizing the seat as a primary seal
Check Valves Manufacturers:- advantages-
Metal or soft seated options. Renewable nickel alloy seat. Integral elastomeric seat.
Variety of flange configurations. Spring loaded hinge.
External spring adjustment.
Compact one-piece body. Easy MaintenanceI
Pipe end connections
Choke body materials can be of forged Robust cartridge trim
Dump tube/sparger (only for bypass to condenser)
Brick stopper anti-collapse trim available
Choose from a wide range of actuator options
Needle Valves Manufacturers:- advantages-
Needle valves are smaller in size. So, there is not an issue of space during its installation
Throttling even with less volume of fluid is possible with this valve Flow rates can be adjusted precisely Its operation is easier
Gate Valves Have a Wide Application Range
Gate Valves are Bidirectional
Back Flow Safety Valve(Size range: DN10mm – 600 mm)
High Temperature Safety Valve High Pressure Safety Valv(Size: DN10mm – 600 mm)
Spring Loaded Safety Valve With Lever
Safety Valve Manufacturers:- Specification -
Size - 1 1/4 Inch 25 to 200 mm Temp Max - 180°F (80°C)
Pressure Max - 250 PSI
-304L/S.S. 316L6
They are efficient and reliable for many years
Available in many materials They can be used in a wide range of sizes
Their characteristics are well known and predictable