This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
2
Contents Login and Menu Path ...................................................................................................... 3
Create a New Folder and Change your Default Data Panel view .................................... 4
Review the InfoAssist interface components ................................................................... 6
Exercise 1: Create a Basic Summary Report with InfoAssist ......................................... 7
Exercise 2: Edit an Existing Report with InfoAssist ...................................................... 14
Exercise 3: Create a Chart Report ............................................................................... 16
Exercise 4: Create a Summary Report with a User-Defined Summary (Compute) Field, Prompted Filter and Format Output ............................................................................... 22
Exercise 5: Create a Detailed Report with a User-Defined Detail (Define) Field and Conditional Formatting with Output to Excel ................................................................. 29
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
4
Create a New Folder and Change your Default Data Pa nel view Follow the steps below to create a new folder and to change your default view in the data panel from a “Logical” view to a “Structured” one, which is recommended by LeanLogistics. The structured view makes visible those fields that are indexed (at least one filter based on an indexed field is required in every report) as well as provides a categorical view of the data elements.
1. View the Domain Tree by clicking on the Tree link in the upper right corner.
2. Right-click the “Standard Reports” folder, then left-click the “New Folder” option.
3. Name the folder (we recommend using your first/last initials followed by ‘Reports’) by typing into the “Folder Name” text field, then click “Save”.
4. Right-click on the “Reports” folder and select InfoAssist.
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
10
7. Add SCAC as a BY field by dragging and dropping it into the interactive design view (as it is the first field, it will automatically be added as a BY field).
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
11
8. Add Load Number as a SUM field by dragging and dropping it into the interactive design view, to the right of SCAC until you view a red line, then choose “Drop as Sum” in the pop-up. HINT: If the pop-up appears and you are unable to select an option by left-clicking your mouse, you can use the arrow keys and the spacebar on your keyboard to select. This is applicable to all menu options and is a “known issue” within InfoAssist.
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
12
9. Left-click on Load Number in the interactive design view so it is highlighted, then on the “Field – Load Number” menu path, click on the “Aggregation” option and select “Count”.
10. Save the report by clicking on the save button ( icon), then name the report “Exercise 1” in the pop-up and click “OK”.
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
13
11. Run the report by clicking run ( icon); when the report is finished running, you will see an output in the interactive design view of a load count per carrier within the specified tender date range in the filter.
12. Close the report by clicking on the Main Menu ( icon) and select “Close”.
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
15
2. Add Trans Mode as a BY field by dragging and dropping it into the interactive design view, in between SCAC and Load Number until you view a red line, then choose “Drop as Sort” in the pop-up.
3. Run the report by clicking run ( icon); when the report is finished running, you will see an output in the interactive design view of a load count per carrier and mode within the specified tender date range in the filter.
4. Save the report by clicking on the save button ( icon).
5. Close the Close the report by clicking on the Main Menu ( icon) and select “Close”.
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
16
Exercise 3: Create a Chart Report
1. Open the Exercise 1 report by clicking on the Main Menu ( icon) and select Open, then select the report in the pop-up window and click “OK”.
2. Click the Home menu item to view the Home ribbon, then select the Chart option. This will convert the existing tabular report into a chart (the default is a bar chart).
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
18
6. Run the report by clicking run ( icon); when the report is finished running, you will then see a load count (bar) for each mode, per carrier within the specified tender date range in the filter.
5. Select the “Interactive” tab at the bottom left corner of the screen to return to the interactive
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
21
8. Save the report by clicking on the Main Menu ( icon) and select “Save As”, then in the pop-up window name the report ‘Exercise 1 Graph’ and click “OK”.
9. Close the Close the report by clicking on the Main Menu ( icon) and select “Close”.
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
23
4. In the Summary Field (COMPUTE) pop-up, create a user-defined field that calculates cost per pound by doing the following:
a. In the Field Name, enter ‘CostPerPound’.
b. Click on the Format button ( icon); in the pop-up, click the “Floating Currency (M) checkbox, then click “OK”.
c. You should now see , which is a 12-digit numeric value up to two decimal places, in a currency format.
d. Click in the Expression section (the large field) and do the following:
i. Double-click Payable Total from the field tree at the right. ii. After the name of the field is automatically inserted, type enter the ‘/’character iii. Double-click Weight from the field tree at the right. The end result should look like
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
25
8. To add a small bar chart next to records for the ‘CostPerPound’ field, use the Data Bar option by right-clicking on the field, then select Data Bars � On.
9. Next, add a prompted filter that the user will enter when running the report by doing the following: a. Select Load Group from the Field Tree and drag it into the Filter Area. b. In the Filter pop-up, click on the Prompt button and select “Prompt using Selection
(Static)”.
c. In the Prompt Field, enter ‘Load Group:’ (this is the text that the end-user will see when running the report).
d. Now click the Values button and select ‘Fetch All Values from Source’ (this may take up to a few minutes, as it is attempting to retrieve all the possible Load Group values)
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
27
10. Run the report by clicking run ( icon). You will now be prompted to make a Load Group selection; choose one or all Load Groups, then click “Run”.
11. When the report is finished running, you will then see a PDF document with load count and cost per pound for each mode, per carrier within the specified tender date range and Load Group in the filter.
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
33
10. Now drag and drop the following fields into the interactive design view, into their appropriate groupings (either BY or PRINT): HINT: You can hold down the Ctrl key to select multiple fields
BY Fields: a. Carrier
PRINT Fields: b. Load Number c. Weight d. Last Drop Plan Date Start e. Last Drop Arrival Date
11. Click the Data menu to view the Data ribbon, then click on the Detail (Define) button.
12. In the Detail Field (DEFINE) pop-up, create a user-defined field that calculates calculate on-time delivery by comparing the Last Drop’s Plan Date Start to its Arrival (“Actual”) Date, where “late” is considered as the Arrival date being anything greater than the same day as the Plan Date Start:
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
34
b. Click on the Format button ( icon); in the pop-up, choose “Alphanumeric” and enter a length of 5, then click “OK”.
c. You should now see , which is a 5-character Alphanumeric value.
d. Click in the Expression section (the large field) and do the following:
i. Type the following text: IF ABS(HDIFF(LOAD_PERFORMANCE.DROP_DATES.LPC_LAST_DROP_PLAN_START_DATE, LOAD_PERFORMANCE.DROP_DATES.LPC_LAST_DROP_ACTUAL_DATE, 'DAY', 'I4')) GT 1 THEN 'NO' ELSE 'YES' HINT: If you attempt to copy and paste the expression above, be aware that because of formatting issues, you may receive an error – if this happens, you can try deleting and re-typing in all of the single quotations
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
38
14. Run the report by clicking run ( icon); when the report is finished running, you will then see a list of weight, last drop plan date, last drop arrival date and on-time status for each load, per carrier within the specified tender date range in the filter.
15. Save the report by clicking on the Main Menu ( icon) and select “Save As”, then in the pop-up window name the report ‘Exercise 4’ and click “OK”.
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
40
Exercise 6: Dashboard Setup
1. On the Reporting Portal screen, go to menu path: Personalize � Content.
2. Click “Add Page” to create a blank tab in the portal.
3. Rename the tab by entering ‘Dashboard’ in the Page Description field, then click “Update”.
4. Click on the button to add a content block to this new tab.
5. Leave the “Block Type” as “Launch”, then expand the “Standard Reports” section of the tree and select the “Exercise 1” report to display in this content block; enter a value in the “Block Name” (optional), then click “Save”.
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
43
Exercise 7: Schedule a Report
1. Close the InfoAssist window to return to the portal view. From the Domain Tree, right-click on the “Exercise 4” report and select “Schedule”. This will display ReportCaster, the scheduling interface.
2. Click on the “Distribution” tab, change the distribution option to “Email Address(es)” and enter your email address; enter “Test” into the Message field, then change the Description and Subject (both optional).
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
44
3. Click on the “Task” tab, then under the “Parameter Name”, click “Load Group:”; on the pop-up, choose one or more values (this was a prompted filter, so you must select at least one value), then click “OK”.
4. Click on the “Frequency” tab, leave the Run Interval at “Once” and change the “Start Schedule”
date/time to be 5 minutes from now.
5. Click the button then click “OK” to the pop-up message; click the button to close the schedule. You will now be able to see the newly created schedule.
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
46
Exercise 8: “Burst” a Report Instead of distributing an entire report, you can use the ReportCaster (the scheduling piece in the BI Tool) to “burst” or break a report into sections to be distributed separately by means of the Address Book/Distribution List options. Bursting enables you to target relevant sections of a report to individual users. Each report section is saved as a separate file. You can send several report sections to one recipient by specifying that recipient's destination (e-mail addresses, FTP files, or printers) for each section you want to send. You can send several report sections to one destination, or you can send one report section to several destinations. The burst values you specify in the Distribution List must exist in the output of the report you are scheduling. 1. From the main portal view, click on the “Schedules” tab.
2. Click on the “Address Book” tab, then click “New” to create a new Distribution List.
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
47
3. In the pop-up window, enter a Name for the list, then enter in Burst Value/Email Address combination. You will be scheduling the “Exercise 1” Report, so the Burst Value is based on the SCAC field – so choose a SCAC that you know will appear in the report, then enter your own email address. Now click “Save”.
HINT: - The Burst Values are based on the FIRST "BY" Field in your report - To distribute separate e-mails for each address, specify the e-mail addresses on separate lines within the distribution list. - To add more rows, double-click in one of the "Address" records and hit the 'Enter' key on your keyboard. - When creating a schedule or distribution list, you can specify multiple e-mail addresses within a single field, row, or record. - When creating a schedule or distribution list, you can separate each e-mail address with a comma or a semicolon. - The multiple e-mail addresses will appear in the 'To' line of a single e-mail when the scheduled output is distributed.
4. Click “OK” to the pop-up message, then click the button. You will now see the newly created Distribution List.
information intended for use by the recipient for consideration of services offered and may not be redistributed, copied,
or disseminated without the express written permission of LeanLogistics, Inc.
49
7. Now click on the “Task” tab and enter a Description, choose the “Exercise 1” and check the “Burst Report” checkbox.
8. Now click on the “Frequency” tab, leave the Run Interval at “Once” and change the “Start
Schedule” date/time to be 5 minutes from now.
9. Click the button then click “OK” to the pop-up message; click the button to close the schedule. You will now be able to see the newly created schedule.
10. Wait 5 minutes then check your email and you should receive an email from
[email protected] with an .htm file attached containing the “Exercise 1” report, with only the section based on the SCAC that was entered in the Distribution List.