1165 W Nolte Dr, Colorado Springs, CO 80916 Page 1 of 9 Burnside Enterprises, LLC 4030 Zurich Drive Colorado Springs, CO 80920 Phone: 719-596-4656 Website: www.LeadPaintColorado.com Email: [email protected]LIMITED ASBESTOS BUILDING INSPECTION Prepared for : City of Colorado Springs Housing Development Division 30 S Nevada Ave, Suite 604 Colorado Springs, CO 80903 Rosemary Dominguez 1165 W Nolte Dr Colorado Springs, CO 80916 Property Address: 1165 W Nolte Dr Colorado Springs, CO 80916 Inspection performed by: John Burnside Colorado Asbestos Building Inspector # 21520 Burnside Enterprises, LLC Asbestos Consulting Firm license # ACF-21529 Inspection performed on June 2, 2015
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1165 W Nolte Dr, Colorado Springs, CO 80916 Page 1 of 9
Attn: John BurnsideBurnside Enterprises4030 Zurich Dr.Colorado Springs, CO 80920
Received: 06/03/15 8:30 AM
1165 W Nolte, Colo Spgs
Fax: (719) 596-4656Phone: (719) 596-4656
Project:
6/4/2015Analysis Date:6/2/2015Collected:
Sample Description Appearance % Type
AsbestosNon-Asbestos
% Fibrous % Non-Fibrous
Test Report: Asbestos Analysis of Bulk Materials via EPA 600/R-93/116 Method using Polarized Light Microscopy
DW-01-Texture
221503106-0001
Drywall Compound White None Detected
HA: 1
Non-FibrousHomogeneous
Non-fibrous (other)100%
DW-01-Tape
221503106-0001A
Drywall Compound White None Detected
HA: 1
FibrousHomogeneous
Cellulose95% Non-fibrous (other)5%
DW-01-Joint Compound221503106-0001B
Drywall Compound White None Detected
HA: 1
Non-Fibrous
Homogeneous
Non-fibrous (other)100%
DW-02
221503106-0002
Drywall Compound White None Detected
HA: 1
Non-FibrousHomogeneous
Non-fibrous (other)100%
DW-03-Texture
221503106-0003
Drywall Compound White None Detected
HA: 1
Non-FibrousHomogeneous
Non-fibrous (other)100%
DW-03-Drywall
221503106-0003A
Drywall Compound Brown/White None Detected
HA: 1
FibrousHomogeneous
Cellulose10% Gypsum50%Non-fibrous (other)40%
DW-04
221503106-0004
Drywall Compound White None Detected
HA: 2
Non-FibrousHomogeneous
Non-fibrous (other)100%
1Test Report PLM-7.28.9 Printed: 6/4/2015 8:52:00 AM
Barbara Shepherd, Laboratory Manageror other approved signatory
Analyst(s)
EMSL maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced, except in full, without written approval by EMSL. EMSL bears no responsibility for sample collection activities or analytical method limitations. Interpretation and use of test results are the responsibility of the client. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST or any agency of the federal government. Non-friable organically bound materials present a problem matrix and therefore EMSL recommends gravimetric reduction prior to analysis. Samples received in good condition unless otherwise noted. Estimated accuracy, precision and uncertainty data available upon request. Unless requested by the client, building materials manufactured with multiple layers (i.e. linoleum, wallboard, etc.) are reported as a single sample. Reporting limit is 1%Samples analyzed by EMSL Analytical, Inc. Denver, CO NVLAP Lab Code 200828-0
2Test Report PLM-7.28.9 Printed: 6/4/2015 8:52:00 AM
Barbara Shepherd, Laboratory Manageror other approved signatory
Analyst(s)
EMSL maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced, except in full, without written approval by EMSL. EMSL bears no responsibility for sample collection activities or analytical method limitations. Interpretation and use of test results are the responsibility of the client. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST or any agency of the federal government. Non-friable organically bound materials present a problem matrix and therefore EMSL recommends gravimetric reduction prior to analysis. Samples received in good condition unless otherwise noted. Estimated accuracy, precision and uncertainty data available upon request. Unless requested by the client, building materials manufactured with multiple layers (i.e. linoleum, wallboard, etc.) are reported as a single sample. Reporting limit is 1%Samples analyzed by EMSL Analytical, Inc. Denver, CO NVLAP Lab Code 200828-0
3THIS IS THE LAST PAGE OF THE REPORT.Test Report PLM-7.28.9 Printed: 6/4/2015 8:52:00 AM
Barbara Shepherd, Laboratory Manageror other approved signatory
Analyst(s)
EMSL maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced, except in full, without written approval by EMSL. EMSL bears no responsibility for sample collection activities or analytical method limitations. Interpretation and use of test results are the responsibility of the client. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST or any agency of the federal government. Non-friable organically bound materials present a problem matrix and therefore EMSL recommends gravimetric reduction prior to analysis. Samples received in good condition unless otherwise noted. Estimated accuracy, precision and uncertainty data available upon request. Unless requested by the client, building materials manufactured with multiple layers (i.e. linoleum, wallboard, etc.) are reported as a single sample. Reporting limit is 1%Samples analyzed by EMSL Analytical, Inc. Denver, CO NVLAP Lab Code 200828-0