Bulletin: Liberty Mutual ® & Safeco ® Profile Setup for CCC ONE ® Claims Management Introduction This bulletin outlines the setup of Liberty Mutual (LM) and Safeco (SA) claim office profiles in CCC ONE (for GRN and IAs). This bulletin also includes UpdatePlus configuration instructions (for GRN). Claim Office Profile Setup Ste p #1: Save (or cut and paste) the LM and/or SA Profiles.zip(s) (located to the right) to a folder on your computer. Copy profiles out of ZIP folder to a new folder. Step #2: Identify and Import the appropriate initial profile into CCC ONE using the following guidelines/directions: Initial profile for Liberty Mutual : - Use 0359 for New Jersey and Illinois - Use 0897 for West Virginia - Use 0275 for all states other than NJ, WV, and IL Initial profile for Safeco : - Use PLOC for New Jersey and Illinois - Use PLPE for West Virginia - Use PLSA for all states other than NJ, WV, and IL To Import the initial profile Into CCC ONE: 1. In CCC ONE, go to Configure>Profiles; select Import Profiles. 2. Browse to the folder on your computer with the saved LM /SA profiles. 3. Select the appropriate initial claim office profile per Step #2. 4. Import LM or SA initial profile into CCC ONE. Step #3: Open the ‘Profile Setup’ job aid (right) to complete LM/SA profile setup for: taxes and labor rates, 2 and 4 wheel alignment prices, zip code search coverage, and the total loss IDs. For Step #1 For Step #3 For Steps #4&5 1 Copyright 2016. CCC Information Services Inc. All rights reserved. CCC ONE ® Estimating is a trademark of CCC Information Services Inc. Important! Click View on the Word Doc Ribbon at the top of the screen and select Edit prior to saving the