Building Ssr 2013-14

1

GOVERNMENT OF ANDHRA PRADESH

BUILDINGS SoR: 2013-2014

COMMITTEE OF CHIEF ENGINEERS

2

SCHEDULE OF RATES

FOR BUILDING WORKS

FOR THE YEAR 2013-2014 (Effective from 1st June, 2013)

ALL ENGINEERING

DEPARTMENTS

Proceedings Buildings SoR: 2013-14

3

Office of the Chief Engineer (R&B) Buildings Convener-Member,

Committee of Chief Engineers-Buildings-SoR

Procs.No. CEB/TA8/AEE3/B-SoR: 2013-14 Dt: 05-08-2013.

Sub:- Printing of Buildings-SoR for all the Engineering Departments specific to the functioning of Building works

Buildings-SoR:2013-14 Communication of Buildings-SoR Reg., Ref:- 1. G.O.Rt.No.471, T,R&B (R.1) Dept., dt:20-04-2007. 2. Minutes of Committee of Chief Engineers meetings for finalizing the Building-SoRs held on Dt: 25-07-2013

and 05-08-2013. * * * * *

The Government of Andhra Pradesh have constituted a Committee of Chief Engineers of Engineering departments

dealing with Building works for finalizing and communicating Buildings-SoR (Civil & Electrical) vide G.O. 1st

cited. In

accordance therewith the Committee of Chief Engineers has finalized and approved the Buildings-SoR: 2013-14 in the

Minutes of Meeting held on 05-08-2013.

The rates for the Building items (Civil, Water Supply & Sanitary and Electrical items) are to be followed henceforth

by all the concerned departments for building works. The rates of Labour Rates, Common Material & Work items, Public

Health items, Conveyance Rates of Materials & Hire charges of Common SoR-2013-14 remain unchanged. No other items

other than the items communicated in this Buildings-SoR shall be introduced.

The Heads of Departments mentioned below are authorized to print the Buildings-SoR: 2013-14. The unauthorized

printing & selling of the Buildings-SoR is strictly prohibited.

The revised rates will come into force with immediate effect. The receipt of the proceedings may please be acknowledged. Enclosed: Buildings SoR: 2013-14-CD as above

Sri. G. Ramakrishna Kumar Chief Engineer (R&B) Buildings

Convener-Member, Committee of Chief Engineers-Buildings-SoR

To 1. Engineer-in-Chief (NH), Roads & Buildings Department, Errummanzil, Hyderabad-82. 2. Engineer-in-Chief (IW)I&CAD, Irrigation Department, Errummanzil, Hyderabad-82. 3. Engineer-in-Chief (State Roads), Roads & Buildings Department, Errummanzil, Hyderabad-82. 4. Engineer-in-Chief (Rural Roads) R&B Department, Errummanzil, Hyderabad-82. 5. Chief Engineer (QC), R&B Department, Errummanzil, Hyderabad-82. 6. Chief Engineer (R&B) (Designs), R&B Department, Errummanzil, Hyderabad-82. 7. Chief Engineer (R&B) (Electrical), R&B Department, Errummanzil, Hyderabad-82 8. Engineer-in-Chief, P.H.. Department, A,C, Guards, Hyderabad-4. 9. Engineer-in-Chief (P.R.), Panchayat Raj Department, Errummanzil, Hyderabad-82. 10. Engineer-in-Chief, Tribal Welfare & Social Welfare Department, DSS Bhavan, Masab tank, Hyderabad. 11. Engineer-in-Chief, Greater Hyderabad Hyderabad Corporation (GHMC), CC Complex,Tankbund Rd., Hyderabad 12. Chief Engineer (AP Housing Board) Gruhakalpa, Nampally, Hyderabad 13. Chief Engineer (Housing Corporation) Urdugally, Himayatnagar, Hyderabad 14. Chief Engineer(APSRTC), RTC X Roads, Musheerabad, Hyderabad. 15. Chief Engineer(APMSIDC), IIIrd Floor, DM&HS Campus, Sultanbazar, Koti, Hyderabad. 16. Chief Engineer (AP Police Housing & Welfare Corporation), Lakdi-ka-pool, Hyderabad. 17. Superintending Engineer (R&B), Head Quarters Circle, Khairatabad, Hyderabad 18. Superintending Engineer (R&B), Electrical Circle, Errummanzil, Hyderabad-82.

Index Buildings SoR: 2013-14

4

INDEX FOR BUILDINGS SoR: 2013-14

Sl.

No: DESCRIPTION Page No:

From To

BUILDINGS SoR:2013-14

1 Index for Building Civil Items 5 5

2 Preamble of Buildings-SoR-2013-14 6 11

3 Building Civil Items - Buildings-SoR-2013-14 12 111

4 Water Supply & Sanitary Items - Buildings-SoR-2013-14 112 167

5 Electrical Items Buildings-SoR-2013-14 168 295

6 Common SoR:2012-13 Preamble 296 301

7 Labour Rates 302 306

8 Basic Input Data for work items 307 333

9 Public Health Items 334 348

10 Conveyance Charges of Materials 349 353

11 Hire Charges of Plant & Machinery 354 357

12 Seigniorage Charges 358 361

Index Buildings SoR: 2013-14

5

BUILDINGS SoR:2013-14

INDEX FOR BUILIDNG CIVIL ITEMS

Sl No

SECTION SECTION CODE DESCRIPTION Pages

from to

1

PREAMBLE 6 11

2 SECTION - A BMT - A 01 to 21 BRICKS & BUILDING BLOCKS 12 14

3 SECTION - B BMT - B 01 to 16 NATURAL FLOORING STONES 14 15

4 SECTION - C BMT - C 01 to 53 WALL & FLOOR TILES 15 18

5 SECTION - D BMT - D 01 to 18 PAVING & INTERLOCKING TILES 18 20

6 SECTION - E BMT - E 01 to 20 TIMBER & ROOFING MATERIALS 20 20

7 SECTION - F BMT - F 01 to 33 MILD, GALVANISED & STAINLESS STEEL 21 23

8 SECTION - G BMT - G 01 to 79 FIXTURES FOR DOORS & WINDOWS 23 26

9 SECTION - H BMT - H 01 to 108 WATER PROOFING CHEMICALS & ADMIXTURES 26 33

10 SECTION - I BMT - I 01 to 21 GLASS 33 34

11 SECTION - J BMT - J 01 to 51 PAINTS & POLISHES 34 35

12 SECTION - K BMT - K 1 to 124 PARTICLE BOARDS 35 38

13 SECTION - L BMT - L 01 to 20 PLYWOOD 38 39

14 SECTION - M BMT - M 01 to 116 CEILINGS, WALL PARTITIONS & WALL LININGS 39 52

15 SECTION - N BMT - N 01 to 88 DOORS 52 74

16 SECTION - P BMT - P 01 to 112 WINDOWS 75 94

17 SECTION - Q BMT - Q 01 to 15 STRUCTURAL GLAZING 94 97

18 SECTION S BMT - S 01 to 15 DISMANTLING 97 97

19 SECTION - T BMT - T 01 to 05 READY MIX CONCRETE 97 97

20 SECTION - U BMT - U 01 to 11 EXPANSION JOINT FILLERS 97 98

21 SECTION - V BMM - V 01 to 24 LABOUR CHARGES 98 99

22 SECTION - W BMS - W 01 to 68 MISCELLANEOUS ITEMS 100 104

23 SECTION - X BMC - X 01 to 12 MACHINERY CHARGES, HIRE CHARGES FOR CENTRING

104 104

24 LIST OF APPROVED BRANDS/ NAMES OF APPROVED MANUFACTURERS/ SUPPLIERS 105 105

25 CENTRING & SCAFFOLDING CHARGES 106 111

Preamble Buildings SoR: 2013-14

6

PREAMBLE


7

1.0 INTRODUCTION

The Government have issued orders vide G.O. Rt. No: 471 TR&B (R-1) Dept., Dt. 20.4.2007

constituting a Committee comprising of Chief Engineers of departments in-charge of execution

of building works for finalization of Standard Schedule of Rates for Buildings (Electrical & Civil).

The 5th meeting of the above SoR Committee for Buildings (Civil & Electrical) was convened

on 25-07-2013 and 05.08.2013 with an objective to finalize and release the Buildings-SoR:

2013-14.

2.0 APPLICABILITY OF COMMON SoR 2013-14

The rates of labour, common materials & work items, Public Health items, conveyance rates of

materials &hire charges approved and published in Common SoR-2013-14 remain applicable.

The specifications, stipulations & all other conditions of Common-SoR other than those

specified in this context remain applicable.

3.0 OVERHEADS & CONTRACTORS PROFIT

a. The provision of Over Heads and Contractors Profit @ 14% as approved by the BoCEs in

Common SoR-2013-14 is applicable for the building works also.

b. It is reiterated that the provision of Over Heads and Contractors Profit is a part of the AP.

Revised standard data approved by the Government in G.O.Ms.No.49 I&CAD (PW-

Reforms) Dept., dated: 02-03-2009 and this component shall be operative on all the data

items of the estimates and rates of the finished items published in Buildings SoR for

original works subjected to the fulfillment of the conditions given below:

i. Site accommodation, setting up plant, access road, water supply, electricity and

general site arrangements.

ii. Office furniture, equipment and communications.

iii. Expenditure on:

a) Corporate office of contractor.

b) Technical agents for site supervision. (Reimbursement to the technical

agents provision is dispensed with where over heads and contractors

profit provision is included in the data rates)

c) Documentation and as built drawings.


8

d) Mobilization/ de-mobilization of resources. (Payment of mobilization

advances shall be dispensed with where over heads and contractors profit

provision is included in the data rates)

e) Labour camps with minimum amenities and transportation to work sites.

f) Light vehicles for site supervision including administrative and managerial

requirements.

g) Laboratory equipment and quality control including field and laboratory

testing. (For all the works costing more than Rs. 2.00 Crores contractors

have to establish Quality Control laboratory)

h) Minor T & P and survey instruments and setting outworks, including

verification of line, dimensions, etc.

i) Watch and ward.

j) Traffic management/ Safety management during construction.

k) Expenditure on safeguarding environment.

iv. Sundries.

v. Financing Expenditure.

vi. Sales/ Turn overtax. (This is a material VAT component only, however the provision

towards Works Contract Value Added Tax at 5% on the finished work items as

defined in APVAT Act-2005 shall be added in the estimates)

vii. Work Insurance/ compensation(Reimbursement to the work insurance provision is

dispensed with where over heads and contractors profit provision is included in

the data rates)

4.0 OTHER GUIDELINES

1. Municipal Area Allowance, Agency or Tribal area allowance or any such allowance on the

labour components of civil, water supply & sanitary items of building works shall be

allowed wherever applicable as per the guidelines and preamble of Common SoR: 2013-14.

2. The rates of the Ready Mix Concrete (RMC) are deleted as the rate analysis is appended in

the A.P. Revised Standard Data-2009.

3. Wherever the concrete pump is used in the data, 8 working hours per day can be

considered for rate analysis purpose.

4. For the structures where the Standard and High Strength Concretes vide IS: 456-2000 is

required, mix design shall be carried out and rates may be arrived as per the design mixes.

5. The finished rates of the wall painting with spray plaster/ synthetic textures from BMT-J.32

to BMT-J.51 are deleted with retrospective effect as the rate analysis for similar painting

items is included the A.P. Revised Standard Data-2009.


9

6. The rates of Hire charges for centering & scaffolding for the SHEAR WALLS, RCC WALLS,

WATER TANK WALLS are deleted from the Buildings SoR with retrospective effect as the

same are included in the Public Health section of Common SoR.

7. The increase in the supply of SWG Pipes, bends, fittings and other related items as

proposed by the Engineer-in-Chief (PH), has been finalized in the Buildings SoR-2013-14.

8. The rates for the Manholes and inspection chambers are finalized based on the detailed

rate analysis.

9. The rates of CI Pipes and fittings have been fixed based on the price lists obtained from the

dealers & manufacturers and based on the Wholesale Price Indices published by the

Government of India.

10. Similarly the Vitreous china ware, porcelain, taps & faucets, G.I Pipes, valves & fittings and

PVC Pipes & fittings have been finalized based on the Wholesale Price Indices published

by the Government of India.

11. The specifications of the aggregates for sizes and gradation and its adoption shall be as per

IS 383-1970 and IS 2386 (Part 1 to Part 8).

12. No allowance towards Labour Importation & Labour Amenities shall be added to the datas

as they are included in the provision of Over heads and contractors profit.

13. For sand, gravel , murum, stones , course aggregates etc, the basic rates are for delivery at

site, excluding seigniorage (royalty) charges, unloading charges by machinery / manual

means and idle hire charges of machinery shall be allowed (as per table under chapter

conveyance or lead and lift charges) as applicable.

14. For all the materials, the basic rates given in the Buildings SoR are landing prices at the

site, except where mentioned specifically.

15. For the materials where the basic rates are mentioned as quarry rates in the Buildings

SoR, which includes initial lead of 1.0 km, lead charges are to be added for the lead

distances from the approved quarries as applicable.

16. The basic item rates provided in the schedule of rates include 50 m (conveyance by manual

means) or 1 km (conveyance by mechanical means) as initial lead and no lead charges shall

be allowed where the source of material is within the initial lead specified in item rate.

Additional lead charges shall be allowed for the lead exceeding initial lead specified in the

item rate.


10

17. The lead charges per unit quantity for conveyance of the materials are worked out, and

included in the schedule of rates in increment of 50 m for head load and in increment of 1

km for mechanical mode.

18. The rates for lead charges by head load up to 150 meters and by machinery up to 5 km shall

be cumulative and inclusive of lead charges for preceding lead.

19. For building works taken up in the hill areas where the materials are conveyed on ghat

roads, the lead distance may be taken as 1.5 times the existing length of the road for the

purpose of leads only for conveyance of materials based on the certificate for the Ghat

Road given by the Superintending Engineer concerned.

20. Loading and unloading charges are not payable for conveyance by head load.

21. Loading and unloading charges are not payable for conveyance by mechanical means, for

disposal of excavated material unless specified.

22. The rates for unloading of materials except earth, sand, gravel, coarse aggregate, rubble,

size stone and cut stone, are inclusive of stacking wherever applicable.

23. Unless otherwise specified, all material rates shall be inclusive of all taxes, duties, levies,

royalty/seigniorage, transportation and handling costs up to project area, but excluding

Works Contract Tax (VAT).

24. As envisaged by the High Level Committee in the SSR Guidelines appended to the

G.O.Ms.No.49 I&CAD (PW-Reforms) Dept., dt: 02-03-2009, a special software ACES is

developed for the revised standard data for Building items, which shall be adopted for

standardization and uniform rates.

25. Any errors, omissions, corrections or suggestions shall be brought to the notice of the

COMMITTEE OF THE CHIEF ENGINEERS (Buildings SoR) for corrective action.

26. For any new items to be included in the Schedule of Rates, recommendations with specific

remarks of the respective departments should reach the Committee of Chief Engineers

well in advance.

27. The CWC (Ministry of Irrigation) has recommended that where standard or schedule of

rates are revised or where is necessary to do so, the primary guiding principle should be

escalation in labour and material cost and not on trend of rates quoted by the contractors.

The Committee of Chief engineers (Buildings SoR) have considered the practicality and

adoptability of the Buildings-SoR in construction of the building projects in finalizing the

Buildings-SoR.


11

28. Wherever feasible, more emphasis is given to the technical specifications for the SoR items

by removing the brand names of the manufacturers from the specification and list of

approved brands in the respective category for the products is grouped and appended at

the end of the SoR so as to bring to an end of encouraging a particular brand.

29. The estimate preparing authorities are advised to specify the brand names/ manufacturers

in the contract documents as per the requirement.

30. The technical specifications, brand names and the corresponding rates given in the water

proofing and chemical admixtures section are for the guidance only. The estimate

preparing authorities are requested to obtain literature for usage / application of

construction / water proofing materials, epoxies etc, from the manufacturers or authorized

suppliers in the contract documents as per the requirement.

5.0 CONCLUSION

1. The Committee of Chief Engineers on Buildings-SoR: 2013-14 (Civil & Electrical) has met in

the chambers of Chief Engineer (R&B) Buildings, on 05-08-2013 at 3.00 P.M., and approved

the Buildings SoR:2013-14. The increase in rates of certain materials of items is considered

based on the Whole Sale Price Indices published by the Economic Advisor, Government of

India.

2. SSR Rates for Sanitary & water supply items are purely for the guidance of the officers in

preparation of estimates vide Para 113 of APPWD code. Authority who prepares the

estimate is however responsible for proper rates as envisaged in Para 45 of APPWD code.

3. The rates published in the Buildings SoR are ceiling rates and the estimate preparing

authorities are responsible for the correctness and reasonableness of the rates and

technical specifications adopted in the estimates.

Building Items Buildings SoR: 2013-14

12

BUILDING ITEMS

Civil Items Buildings SoR: 2013-14

13

Sl. No Item Code Description of item Unit SS RATE

FOR 2013-14

1 2 3 4 5

A BRICKS & BUILDING BLOCKS

1 BMT-A.01 Common burnt clay bricks of class as per Table-1 of IS:1077-1992 Non-Modular or traditional size 23 x 11 x 7 cm (ex-quarry price - excluding cost of conveyance, loading & unloading)

1000 Nos 3,707.00

2 BMT-A.02 Common burnt clay bricks of class as per Table-1 of IS:1077-1992 Modular or traditional size 19 x 9 x 9 cm (ex-quarry price - excluding cost of conveyance, loading & unloading)

1000 Nos 5,005.00

3 BMT-A.03 Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5 (ex-quarry price - excluding cost of conveyance, loading & unloading) 290 x 225 x 140 mm

Each 23.00


Each 20.00


Each 15.00

6 BMT-A.06 Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5 (ex-quarry price - excluding cost of conveyance, loading & unloading) 290 x 112/100 x 140 mm

Each 13.00


Each 6.00


Each 14.00


Each 11.00

10 BMT-A.10 Fly ash cement/ lime solid blocks with compressive strength of 50 kg/sq.cm - IS:12894-1990 - CLASS - 5 (ex-quarry price - excluding cost of conveyance, loading & unloading) 290 x 225 x 140 mm

Each 19.00


Each 16.00


Each 12.00


14


FOR 2013-14

1 2 3 4 5

13 BMT-A.13 Fly ash cement/ lime solid blocks with compressive strength of 50 kg/sq.cm - IS:12894-1990 - CLASS - 5 (ex-quarry price - excluding cost of conveyance, loading & unloading) 290 x 112/100 x 140 mm

Each 10.00


Each 5.00


Each 11.00


Each 9.00

17 BMT-A.17 Supply of well burnt cinder aggregates as per IS: 2686-1977 1 Cum 529.00

18 BMT-A.18 Supply of Aerated (Cellular) Autoclaved Concrete Blocks conforming to IS:2185 (Part-3) - 1984 and IS:6441-1972 of Compressive strength 3 N/mm2 of Aerocon / Airolite or equivalent products (landing cost - including cost of conveyance, loading & unloading) 600 x 200 x 100 mm

Each 90.00


Each 124.00


Each 166.00


Each 191.00

B NATURAL FLOORING STONES (ex-quarry price - excluding cost of conveyance, loading & unloading)

22 BMT-B.01 Kadapa slab 40 mm thick and size not less than 0.457 M x 0.457 M

1 Sqm 90.00

23 BMT-B.02 Kadapa slab 50 mm thick and size not less than 0.457 M x 0.457 M

1 Sqm 103.00

24 BMT-B.03 Shahabad /Tandur Rough Stone slabs of minimum of 25 mm thick

10 Sqm 897.00

25 BMT-B.04 Shahabad / Tandur Rough Stone slabs of minimum 40 mm thick 10 Sqm 1,157.00

26 BMT-B.05 Polished Shahabad/ Tandur stone slabs of 15 to 18 mm thick (0.457x0.304) or any other size as specified

10 Sqm 1,544.00


15


FOR 2013-14

1 2 3 4 5

27 BMT-B.06 Polished black Kadapa slabs minimum of 15 mm thick (0.457x0.457M)

10 Sqm 1,287.00

28 BMT-B.07 Polished Bethamcherla pure (marble type) white stone minimum 25 mm thick (0.254Mx0.254M)

10 Sqm 3,603.00

29 BMT-B.08 Polished Bethamcherla coloured stone minimum 25 mm thick (0.254M x0.254M)

10 Sqm 2,573.00

30 BMT-B.09 High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black/ premium colours

1 Sqm 2,751.00

31 BMT-B.10 High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black and regular colours

1 Sqm 2,392.00

32 BMT-B.11 High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) black

1 Sqm 2,033.00

33 BMT-B.12 Polished Marble slabs of any variety (Such as Dongari/ Adanga/ Marodh/ Rajganpur etc) 16 mm to 20 mm (average) thick (size 0.457 M x 0.457 M) / (0.6M x 0.6M)

1 sqm 681.00

34 BMT-B.13 Polished Marble slabs of any variety (Such as Dongari/ Adanga/ Marodh/ Rajganpur etc) polished 16 mm to 20 mm (average) thick 0.305 M x 0.305 M

1 sqm 550.00

35 BMT-B.14 Polished Marble slabs of any variety and gang saw cut (Such as Dongari/ Adanga/ Marodh/ Rajganpur etc) 16 mm to 20 mm (average) thick ( 0.610 M width of any length)

1 sqm 933.00

36 BMT-B.15 Polished Marble Tiles 8 mm thick of all sizes and varieties 1 sqm 444.00

37 BMT-B.16 Granite stone tiles 8 mm thick (mirror polished of all shades) 1 sqm 933.00

C WALL & FLOOR TILES (landing cost - including cost of conveyance, loading & unloading)

38 BMT-C.01 Supply of Ceramic floor tiles of not less than 7.3mm thick 1st quality in all shades and designs

1 sqm 447.00

39 BMT-C.02 Supply of Edge Cut - Rectified Ceramic floor tiles of not less than 8 mm thick 1st quality in all shades and designs

1 sqm 538.00

40 BMT-C.03 Supply of decorated white background glazed wall tiles of any size and of 5 to 7 mm thick

1 sqm 549.00

41 BMT-C.04 Supply of screen printed, decorated coloured background glazed wall tiles of any size and of 5 to 7 mm thick

1 sqm 612.00

42 BMT-C.05 Supply of decorated coloured background glazed wall tiles of any size and of 5 to 7 mm thick

1 sqm 580.00

43 BMT-C.06 Supply of Ist quality, plain white glazed wall tiles of any size and of 5 to 7 mm thick

1 sqm 335.00

44 BMT-C.07 Supply of Ist Quality, glazed plain coloured wall tiles of any size and of 5 to 7 mm thick

1 sqm 397.00

45 BMT-C.08 Supply of precast terrazzo tiles 20 mm thick of medium shades 1 sqm 285.00

46 BMT-C.09 Supply of precast terrazzo tiles 20 mm thick of dark shades 1 Sqm 277.00

47 BMT-C.10 Supply of coloured precast terrazzo tiles of 20 mm thick 1 Sqm 299.00

48 BMT-C.11 Supply of white/ plain precast terrazzo tiles of 20 mm thick 1 Sqm 232.00

49 BMT-C.12 Supply of grey precast terrazzo tiles of 20 mm thick 1 Sqm 150.00

50 BMT-C.13 Supply of vitrified polished floor tiles of size not less than 900 x 900 x 10 mm thickness regular finish and normal colours

1 Sqm 1,225.00

51 BMT-C.14 Supply of vitrified polished floor tiles of size not less than 795 x 1 Sqm 1,080.00


16


FOR 2013-14

1 2 3 4 5

795 mm x 8 mm thickness regular finish and normal colours

52 BMT-C.15 Supply of vitrified polished floor tiles of size not less than 598 x 598 mm x 8 mm thickness glossy finish premium colours

1 Sqm 1,008.00

53 BMT-C.16 Supply of vitrified polished floor tiles of size not less than 598 x 598 mm x 8 mm thickness regular finish and normal colours

1 Sqm 607.00

54 BMT-C.17 Supply of vitrified polished floor tiles of size not less than 400 x 400 x7mm thickness normal colours

1 Sqm 648.00

55 BMT-C.18 Supply of glass mosaic tiles 1st quality of size 20x20x4 mm thick

1 Sqm 1,368.00

56 BMT-C.19 Providing of Vitrified/ Ceramic Tile flooring for required areas using different sizes, approved colour and make fixing with synthetic/ epoxy adhesive in specified thickness without joint including all taxes excluding cost of tiles 600 x 600 mm and above sizes tiles.

1 Sqm 148.00

57 BMT-C.20 Providing of Vitrified/ Ceramic Tile flooring for required areas using different sizes, approved colour and make fixing with synthetic/ epoxy adhesive in specified thickness without joint including all taxes excluding cost of tiles 400 x 400 mm and below size tiles

1 Sqm 119.00

58 BMT-C.21 Providing tile flooring with synthetic/ epoxy adhesive in specified thick and pointing specified colour cement based polymer grout mixed with grout admix including all taxes excluding cost of tiles: 600 x 600 mm tiles with 3 mm joints width

1 Sqm 169.00

59 BMT-C.22 Providing tile flooring with synthetic/ epoxy adhesive in specified thick and pointing specified colour cement based polymer grout mixed with grout admix including all taxes excluding cost of tiles:600 x 600 mm tiles with 4 mm joints width

1 Sqm 177.00


1 Sqm 170.00


1 Sqm 180.00


1 Sqm 177.00


17


FOR 2013-14

1 2 3 4 5


1 Sqm 192.00


1 Sqm 186.00


1 Sqm 203.00

66 BMT-C.29 Providing Glass Mosaic tiles using specified pattern fixing with grout and approved colour of joint filling with admix cement grouting including all taxes excluding cost of tiles

1 Sqm 295.00

67 BMT-C.30 Providing tile flooring with synthetic/ epoxy adhesive in specified thick and pointing with specified colour epoxy grout excluding cost of tiles:600 x 600 mm tiles with 4 mm joints width

1 Sqm 342.00


1 Sqm 281.00


1 Sqm 336.00


1 Sqm 336.00


1 Sqm 408.00


1 Sqm 346.00


1 Sqm 420.00

74 BMT-C.37 Providing Glass Mosaic tiles using specified pattern fixing with epoxy grout and approved colour of joint filling with admix

1 Sqm 283.00


18


FOR 2013-14

1 2 3 4 5

cement grouting including all taxes excluding cost of tiles

75 BMT-C.38 Providing Glass Mosaic tiles using specified pattern fixing with epoxy grout and approved colour cement admix grout including all taxes excluding cost of tiles

1 Sqm 1,260.00

76 BMT-C.39 Supply of design wall tiles of any colour and size other than highlighters and of thickness 8 to 10 mm including all taxes

1 Sqm 419.00

77 BMT-C.40 Supply of design highlighters wall tiles of any colour and size and of thickness 8 to 10 mm including all taxes

1 Sqm 478.00

78 BMT-C.41 Supply of design highlighters wall tiles of premium / radium colours and of any size and of thickness 8 to 10 mm including all taxes

1 Sqm 538.00

79 BMT-C.42 Supply of plain exterior wall tiles of thickness 20 mm of any size for wall claddings

1 Sqm 430.00

80 BMT-C.43 Supply of exterior design wall tiles of thickness 20 mm of any size for wall claddings

1 Sqm 550.00

81 BMT-C.44 Supply of Plain design floor and wall tiles set with floor tiles of thickness 15 mm and wall tiles of thickness 9 mm

1 Sqm 618.00

82 BMT-C.45 Supply of textured design floor and wall tiles set with floor tiles of thickness 15 mm and wall tiles of thickness 9 mm

1 Sqm 664.00

83 BMT-C.46 Supply of premium plain design floor and wall tiles set with floor tiles of thickness 15 mm and wall tiles of thickness 9 mm

1 Sqm 894.00

84 BMT-C.47 Supply of premium textured design floor and wall tiles set with floor tiles of thickness 15 mm and wall tiles of thickness 9 mm

1 Sqm 929.00

85 BMT-C.48 Supply of premium plain design highlighter combination floor and wall tiles set with floor tiles of thickness 15 mm and wall tiles of thickness 9 mm but excluding highlighters

1 Sqm 1,166.00

86 BMT-C.49 Supply of premium plain design highlighter combination floor and wall tiles set with floor tiles of thickness 15 mm and wall tiles of thickness 9 mm but including highlighters

1 Sqm 1,195.00

87 BMT-C.50 Vitrified polished floor tiles of size not less than 1000 x 1000 x 10 mm thickness with nano technology printing and high glossy finish/ premium colours

1 Sqm 1,680.00

88 BMT-C.51 Vitrified polished floor tiles of size not less than 795 x 795 mm x 8 mm thickness with nano technology printing and high glossy finish/ premium colours special series

1 Sqm 1,484.00

89 BMT-C.52 Vitrified polished floor tiles of size not less than 598 x 598 mm x 8 mm thickness with nano technology printing and glossy finish premium colours high glossy finish/ premium colours special series

1 Sqm 1,214.00

90 BMT-C.53 Vitrified polished floor tiles of size not less than 900 x 900 mm x 10 mm thickness with nano technology printing and glossy finish premium colours high glossy finish/ premium colours special series

1 Sqm 1,344.00

D PAVING & INTERLOCKING TILES (landing cost - including cost of conveyance, loading & unloading)

91 BMT-D.01 Chequered Terrazzo tiles of 22 mm thick (Medium shade) 0.254 M x 0.406 M

1 sqm 273.00


19


FOR 2013-14

1 2 3 4 5

92 BMT-D.02 Chequered Terrazzo tiles of 22 mm thick (Dark shade) 0.254 M x 0.406 M

1 sqm 250.00

93 BMT-D.03 Chequered Terrazzo tiles of 30 mm thick ( Light shade) 0.305 M x 0.305 M

1 sqm 250.00

94 BMT-D.04 Chequered Terrazzo tiles of 30 mm thick (Dark shade) 0.305 M x 0.305 M

1 sqm 266.00

95 BMT-D.05 Chequered Terrazzo tiles of 30 mm thick ( medium shade) 0.305 M x 0.305 M

1 sqm 235.00

96 BMT-D.06 Supply, laying & fixing of 60 mm thick cement Mosaic reflective concrete pavers of grade M-40 and above including labour charges, loading & unloading, laying to desired lines and levels complete excluding cost of cement, sand, water, electricity etc

1 Sqm. 531.00

97 BMT-D.07 Supply, laying & fixing of 30 mm thick cement Mosaic reflective concrete pavers of grade M-40 and above including labour charges, loading & unloading, laying to desired lines and levels complete excluding cost of cement, sand, water, electricity etc

1 Sqm. 549.00

98 BMT-D.08 Supply of high strength Cement Concrete Designer Tiles of 30 mm thickness of M- 40 Grade of which top 12 mm thick shall be for colour pigmentation with imported colours and white cement to get required reflective glazing inclusive of all taxes

1 Sqm 484.00

99 BMT-D.09 Supply of high strength Cement Concrete interlocking Designer Pavers of 60 mm thickness of M- 40 Grade of which top 12 mm thick shall be for colour pigmentation with imported colours and white cement to get required reflective glazing inclusive of all taxes

1 Sqm 533.00

100 BMT-D.10 Supply of high strength Cement Concrete interlocking Designer Pavers of 80 mm thickness of M- 40 Grade of which top 12 mm thick shall be for colour pigmentation with imported colours and white cement to get required reflective glazing inclusive of all taxes

1 Sqm 606.00

101 BMT-D.11 Supply of high strength Cement Concrete interlocking Regular Pavers of 60 mm thickness of M- 40 Grade of which top 12 mm thick shall be for colour pigmentation with imported colours and white cement to get required reflective glazing inclusive of all taxes

1 Sqm 291.00

102 BMT-D.12 Supply of high strength Cement Concrete interlocking Regular Pavers of 80 mm thickness of M- 40 Grade of which top 12 mm thick shall be for colour pigmentation with imported colours and white cement to get required reflective glazing inclusive of all taxes

1 Sqm 315.00

103 BMT-D.13 Supply of high strength Cement Concrete pre-polished ready to lay floor tiles of any colour, design and any size with 22 mm thickness including all taxes with compressive strength not less than 450 Kg/cm conforming to IS 516

1 Sqm 485.00

104 BMT-D.14 Supply of high strength Cement Concrete Step tiles of regular colour, design and of 25 mm thickness including all taxes

1 Sqm 555.00


20


FOR 2013-14

1 2 3 4 5

105 BMT-D.15 Supply of high strength Cement Concrete pre-polished Step tiles of any premium colour, design and of 25 mm thickness including all taxes

1 Sqm 619.00

106 BMT-D.16 Supply of Cement Concrete interlocking Pavers of 60 mm thickness and dumbbell, zig-zag, I-block shapes etc., inclusive of all taxes

1 Sqm 400.00


1 Sqm 440.00


1 Sqm 480.00

E TIMBER & ROOFING MATERIALS (landing cost - including cost of conveyance, loading & unloading)

Note: Before proposing the Teak Wood Items, the estimating authorities shall obtain prior approval from the competent authority

109 BMT-E.01 Medium Teak Wood scantlings: up to 2.0 M 1 cum 63,567.00

110 BMT-E.02 Medium Teak Wood scantlings: 2.0 to 3.0 M 1 cum 70,630.00

111 BMT-E.03 Medium Teak Wood scantlings: above 3.0 M 1 cum 77,693.00

112 BMT-E.04 Medium Teak Wood Plancks: any thickness 1 cum 1,27,134.00

113 BMT-E.05 Best Teak Wood scantlings: up to 2.0 M 1 cum 1,09,477.00

114 BMT-E.06 Best Teak Wood scantlings: 2.0 to 3.0 M 1 cum 1,16,540.00

115 BMT-E.07 Best Teak Wood scantlings: above 3.0 M 1 cum 1,23,603.00

116 BMT-E.08 Best Teak Wood Plancks: any thickness 1 cum 1,37,729.00

117 BMT-E.09 Burma Teak Wood scantlings: up to 2.0 M 1 cum 1,27,311.00

118 BMT-E.10 Burma Teak Wood scantlings: 2.0 to 3.0 M 1 cum 1,30,948.00

119 BMT-E.11 Burma Teak Wood scantlings: above 3.0 M 1 cum 1,37,729.00

120 BMT-E.12 Burma Teak Wood Plancks: any thickness 1 cum 1,49,137.00

121 BMT-E.13 Assam Teak Wood scantlings: any length 1 cum 45,180.00

122 BMT-E.14 Assam Teak Wood Plancks: any thickness 1 cum 65,512.00

123 BMT-E.15 Sal Wood scantlings: any length 1 cum 48,543.00

124 BMT-E.16 Sal Wood Plancks: any thickness 1 cum 64,725.00

125 BMT-E.17 A.C sheet Corrugated 6 mm thick 1 sqm 207.00

126 BMT-E.18 A.C sheet plain 4 m thick 1 sqm 148.00

127 BMT-E.19 A.C sheet plain 6 m thick 1 sqm 154.00

128 BMT-E.20 Plain or Corrugated Galvanized iron sheets as per IS 277 (0.1 mm to 0.8 mm thickness)

1 kg 56.00

F MILD, GALVANIZED & STAINLESS STEEL (landing cost - including cost of conveyance, loading & unloading)


21


FOR 2013-14

1 2 3 4 5

129 BMT-F.01 Mild Steel Hallow single rebate general purpose door frames manufactured using cold roll formed process steel sheet of 1.25 mm thick bright (Cold Rolled Close Annealed (CRCA) and profile-B of size 105 x 60 mm conforming to IS 4351 - 2003 including pretreatment, phosphating with butt hinges, Base Ties, Holdfast Lugs, Mortar Guards, shock absorbers and provision for Tower Bolts, Aldrops, Lock & Strike plates etc. for both single and double shutter doors

1 Rm 302.00

130 BMT-F.02 Country Nails 1 Kg 57.00

131 BMT-F.03 Wire Nails 1 Kg 57.00

132 BMT-F.04 Mild Steel Tubes & pipes of all diameters as per IS-1161 1 Kg 57.00

133 BMT-F.05 Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & diameters - 202 Grade

1 Kg 187.00

134 BMT-F.06 Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & diameters for - 304 Grade

1 Kg 309.00

135 BMT-F.07 Supplying Galvanized Steel Barbed wire conforming to IS 278 - 1978 : Type A - IOWA Type Designation as per standard specification

1 Kg 77.00

136 BMT-F.08 Supplying Galvanized Steel Barbed wire conforming to IS 278 - 1978 : Type B - Glidden Type Designation as per standard specification

1 Kg 77.00

137 BMT-F.09 Expanded metal sheets as per IS-412-1962- Light Weight-25 mm(SWM)x75 mm (LWM)3.25 mm Wide and 1.25 mm thick

1 Sqm 136.00

138 BMT-F.10 Expanded metal sheets as per IS-412-1962- Light Weight-20 mm(SWM)x60 mm(LWM) 2.50 mm Wide and 1.25 mm thick

1 Sqm 136.00

139 BMT-F.11 Expanded metal sheets as per IS-412-1962- Light Weight-20 mm(SWM)x50 mm(LWM) 2.50 mm Wide and 1.25 mm thick

1 Sqm 136.00

140 BMT-F.12 Expanded metal sheets as per IS-412-1962- Medium Weight-25 mm(SWM)x75 mm(LWM) 3.25 mm Wide and 1.60 mm thick

1 Sqm 187.00


1 Sqm 187.00


1 Sqm 187.00

143 BMT-F.15 Expanded metal sheets as per IS-412-1962- Heavy Weight-25 mm(SWM)x75 mm(LWM) 3.25 mm Wide and 2.24 mm thick

1 Sqm 213.00


1 Sqm 213.00


1 Sqm 213.00

146 BMT-F.18 Galvanized Iron fly proof wire mesh of not less than 20 gauge 1 Sqm 203.00

147 BMT-F.19 Stainless steel fly proof wire mesh of not less than 20 gauge 1 Sqm 492.00

148 BMT-F.20 Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979: 2"x2" (50 mm x 50 mm) - 8 Gauge

1 Sqm 445.00


1 Sqm 353.00


1 Sqm 301.00

151 BMT-F.23 Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm) 1 Sqm 223.00


22


FOR 2013-14

1 2 3 4 5

as per IS: 2721-1979: 4"x4" (102 mm x 102 mm) - 8 Gauge

152 BMT-F.24 Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979 - PVC Coated - 2"x2" (50 mm x 50 mm) - 8 Gauge

1 Sqm 537.00


1 Sqm 445.00


1 Sqm 367.00


1 Sqm 287.00

156 BMT-F.28 Rabbit wire mesh (chicken mesh) of not less than 30 gauge 1 Sqm 16.00

157 BMT-F.29 Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108

1 Sqm 2,500.00

158 BMT-F.30 Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm centre ,Bracers with flat iron 40x40x6 mm with 38 mm dia steel pulleys, the top, bottom and side vertical frames of the collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for the pulleys to guide and fixed with necessary hold fasts, bolts, nuts, rivets, locking arrangements, stoppers, handles, all accessories all fixtures and painted with one coat of approved steel primer etc., complete for finished item of work as per special spn 1105

1 Sqm 2,187.00

159 BMT-F.31 Powder Coated Mild Steel Hallow single rebate door frames manufactured using cold roll formed process steel sheet of 1.25 mm thick bright (Cold Rolled Close Annealed (CRCA) and profile size of 105 x 60 mm conforming to IS 4351 - 2003 including pre-treatment, Galvanized as per IS:277, zinc phosphating finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 60 65 microns(Dry film thickness)Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame with Hinges, Base Ties, Holdfast Lugs, Mortar Guards, shock absorbers and provision for Tower Bolts, Aldrops, Lock & Strike plates etc. for both single and double shutter doors

1 RM 650.00


23


FOR 2013-14

1 2 3 4 5

160 BMT-F.32 Supply and Fixing Door Frames made of Skin pass galvanized Iron Sheet ( conform to Base Steel as per IS 513 D Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 grams/ Sq.mtr) with pure polyester powder coating of 60 - 65 Microns (Dry Film thickness) manufactured from 1.2 mm thick galvanized steel sheet formed to single rebate profile of size 100 mm x 58 mm fitted with TEE anchors and supplied to knock down /welded form with Miter Joint for Bolted Assembly at site, cleaned and coated with Polyurethane powder coating of thickness 65 75 microns (Dry Film Thickness) & Oven Baked at 200 Degree Centigrade for Wood Grain finish, Stainless Steel Ball Bearing Butt Hinges of 102 x 76 x 3mm thick fixed flush to the frame

1 RM 735.00

161 BMT-F.33 Supply and Fixing Door Frames made of Skin pass galvanized Iron Sheet ( conform to Base Steel as per IS 513 D Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 grams/ Sq.mtr) with pure polyester powder coating of 60 - 65 Microns (Dry Film thickness) manufactured from 1.2 mm thick galvanized steel sheet formed to double rebate profile of size 148 mm x 58 mm fitted with TEE anchors and supplied to knock down /welded form with Miter Joint for Bolted Assembly at site, cleaned and coated with Polyurethane powder coating of thickness 65 75 microns (Dry Film Thickness) & Oven Baked at 200 Degree Centigrade for Wood Grain finish, Stainless Steel Ball Bearing Butt Hinges of 102 x 76 x 3mm thick fixed flush to the frame

1 RM 804.00

G FIXTURES FOR DOORS & WINDOWS

162 BMT-G.01 Brass Tower Bolt-10 mm Bolt (IS:204) 100 mm Long Each 101.00





167 BMT-G.06 Aluminium Tower Bolt-10 mm Bolt (IS:204) 75 mm Long Each 62.00








175 BMT-G.14 MS-Powder Coated Tower Bolt-10 mm Bolt (IS:204) 100 mm Long

Each 23.00


Each 35.00


Each 50.00


24


FOR 2013-14

1 2 3 4 5


Each 68.00


Each 84.00

180 BMT-G.19 Brass Butt hinges (IS:205)- 75 mm Long Each 42.00




184 BMT-G.23 Aluminium Butt hinges (IS:205)- 75 mm Long Each 89.00




188 BMT-G.27 MS-Powder Coated Butt hinges (IS:205)- 75 mm Long Each 11.00




192 BMT-G.31 Aluminium Door Handles (IS:208) 75 mm Long Each 60.00




196 BMT-G.35 MS-Powder Coated Door Handles (IS:208) 125 mm Long Each 31.00

197 BMT-G.36 MS-Powder Coated Door Handles (IS:208) 150 mm Long Each 46.00

198 BMT-G.37 Brass Aldrops (IS:2681) 300 mm long Each 891.00

199 BMT-G.38 Brass Aldrops (IS:2681) 350 mm long Each 1,715.00

200 BMT-G.39 Brass Aldrops (IS:2681) 450 mm long Each 2,442.00

201 BMT-G.40 Aluminium Aldrops (IS:2681) 200 mm long Each 264.00



204 BMT-G.43 MS-Powder Coated Aldrops (IS:2681) 200 mm long Each 105.00



207 BMT-G.46 Brass Door Stoppers Each 179.00

208 BMT-G.47 Brass Windows Stay Each 203.00

209 BMT-G.48 Aluminium Flat Latches: 200 mm long Each 127.00



212 BMT-G.51 MS-Powder Coated Flat Latches: 250 mm long Each 52.00

213 BMT-G.52 MS-Powder Coated Flat Latches: 300 mm long Each 66.00

214 BMT-G.53 MS-Powder Coated - Door Stoppers Each 46.00

215 BMT-G.54 Supply & fixing drapery rods (25.4 mm) 1" x 21 G Powder coated with PVC rings

RM 116.00

216 BMT-G.55 Supply & fixing drapery bracket - brass powder coated pair 409.00

217 BMT-G.56 Deluxe window stay Aluminium Each 116.00

218 BMT-G.57 Heavy duty Aluminium Door stopper Each 50.00

219 BMT-G.58 Brass fancy handles 150 mm Each 303.00




25


FOR 2013-14

1 2 3 4 5


223 BMT-G.62 Brass fancy handles 450 mm Each 1,482.00

224 BMT-G.63 Providing and fixing Cast Iron Body Bottle Type Hydraulic Door Closer (IS: 3564) with double speed adjustment, with necessary accessories and screws etc. complete

Each 938.00

225 BMT-G.64 Double action Stainless steel cover plate and cast body iron floor spring (IS 6315- Table-1)

Each 1,280.00

226 BMT-G.65 Double action Brass cover plate and cast brass body floor spring (IS 6315- Table-1)

Each 3,037.00

227 BMT-G.66 Heavy duty mortise lock 6/7 levers (IS:2209) with PC or CP handles complete set

Each 626.00

228 BMT-G.67 Heavy duty mortise lock 6/7 levers (IS:2209) with brass heavy handles

Each 2,180.00

229 BMT-G.68 Brass latch heavy 300 mm Each 521.00



232 BMT-G.71 Friction stay hinges for windows Each 97.00

233 BMT-G.72 Keyless lockset for toilet doors with CP or PC knob handles (complete set)

Each 282.00

234 BMT-G.73 Keyless lock set for toilet doors with brass knob handles Each 745.00

235 BMT-G.74 Providing and fixing Aluminium Extruded Section Body Tubular Type Hydraulic Door Closer (IS: 3564) with double speed adjustment with necessary accessories and screws etc. complete (Type-1: for width of doors up to 700 mm)

Each 1,011.00

236 BMT-G.75 Providing and fixing Aluminium Extruded Section Body Tubular Type Hydraulic Door Closer (IS: 3564) with double speed adjustment with necessary accessories and screws etc. complete (Type-2: for width of doors 701 to 850 mm)

Each 1,083.00

237 BMT-G.76 Providing and fixing Aluminium Extruded Section Body Tubular Type Hydraulic Door Closer (IS: 3564) with double speed adjustment with necessary accessories and screws etc. complete (Type-3: for width of doors 851 to 1000 mm)

Each 1,136.00

238 BMT-G.77 Providing and fixing double action brass cast hydraulic floor spring (IS:6315-Table 1) for doors including cost of cutting floors as required, embedding in floors and S.S./ Brass cover plates with brass pivot and single piece M.S. Sheet outer box with slide plate etc. complete (door weight capacity up to 130 kgs)

Each 3,198.00

239 BMT-G.78 Providing and fixing double action brass cast hydraulic floor spring (IS:6315-Table 1) for doors including cost of cutting floors as required, embedding in floors and S.S. cover plates with brass pivot and single piece M.S. Sheet outer box with slide plate etc. complete (door weight capacity up to 80 kgs)

Each 2,377.00


26


FOR 2013-14

1 2 3 4 5

240 BMT-G.79 Providing of brass cast body Floor Spring IS: 6315 sleek in size with the S.S. / Brass Cover plates of Length 320 mm x Breadth 130 mm size along with the Top Patch, Bottom Patch, Door Lock and Pivot with Double Cylinder etc. complete for Heavy duty Glass doors.

Each 10,564.00

H WATER PROOFING CHEMICALS & ADMIXTURES

Literature for usage / application of construction / water proofing materials, epoxies etc, may be obtained from manufacturers.

241 BMT-H.01 Supply of cement based Impervious Water Proofing powder compound

kg 24.00

242 BMT-H.02 Providing Tar felting roof repairs with Rainseal Felt/ Zori-felt BT or equivalent duly applying one coat of appropriate grade of bitumen in hot condition @ 0.2 Kg/1Sqm of roof area, fixing tar felt (Manufactures to IS 1322/1972 specification), applying second coat of appropriate grade of hot bitumen at 0.20 Kg/1Sqm of roof area and spreading course aggregate (sand) at 0.063 cum per 1 Sqm of roof area finished item

1 Sqm 228.00

243 BMT-H.03 Providing waterproofing treatment by supplying and applying Rainseal HDP 1500 /ROOFSHIELD-1500 OR ZORISHIELD-1500 equivalent (1.50 mm thickness, 2.25Kg per Sq. Mt and 20 X1 Mtr. roll with a centre core of 90 micron thickness HMHDPE film) Water Proofing Membrane. A) apply one coat of Bituminous Emulsion, first coat of bituminous grade 85/25, fix "Rainseal HDP 1500/ROOFSHIELD-1500 OR equivalent " water proofing membrane, apply second coat of Bitumen grade 90/15 after sealing all the joints and abutments with a Gas torch and apply one coat of Rainseal SAP- BITUMINOUS ALUMINIUM PAINT for heat resistance for finished item

1 Sqm. 247.00

244 BMT-H.04 Providing chemical waterproof treatment with Brick bat coba & chemical cement mortars to exposed RCC roof slab surfaces to required slopes mixed with Conproof NO.1/ Rain Proof No 1/Zoriproof (100 ml Per Bag of 50 Kgs Cement) waterproofing chemical compound, laid over roof slab and brickbat coba treatment in chemical cement mortar 100 mm thick at the centre and 80 mm thick at the edges finished smooth with a floating coat of chemical mixed cement mortar as per the manufacturer specification including cost and conveyance of all materials like sand, chemicalConproof NO.1/ Rain Proof No 1 Zoriproof (100 ml Per Bag of 50 Kgs Cement) waterproofing compound, water etc., to site, including seigniorage charges and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth curing including rounding off junctions of wall and slab etc., complete for finished item of work (with a guarantee of 10 years)

1 Sqm 812.00


27


FOR 2013-14

1 2 3 4 5

245 BMT-H.05 Providing chemical waterproof treatment with Brick bat coba & chemical cement mortars to exposed RCC roof slab surfaces to required slopes mixed with Conproof NO.1/ Rain Proof No 1/Zoriproof (100 ML Per Bag of 50 Kgs Cement) waterproofing chemical compound, laid over roof slab and brickbat coba treatment in chemical cement mortar 80 mm thick at the centre and 60 mm thick at the edges finished smooth with a floating coat of chemical mixed cement mortar as per the manufacturer specification including cost and conveyance of all materials like sand, chemical Conproof NO.1/ Rain Proof No 1/Zoriproof (100 ml Per Bag of 50 Kgs Cement) waterproofing compound, water etc., to site, including seigniorage charges and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth curing including rounding off junctions of wall and slab etc., complete for finished item of work (with a guarantee of 10 years)

1 Sqm 675.00

246 BMT-H.06 Construction Chemicals, Epoxy & Admixtures - Chloride free water reducing and plasticizing admixture : Consplax/ Conflow SNP1 Zoriplast (Dosage : 20 ml Per Bag of 50 Kgs Cement) or equivalent

1 litre 129.00

247 BMT-H.07 High strength Acrylic blended platicizer and Water reducing agent - Roofplast HS 100/ Conflow SNP20 or Zoriplast HS (Dosage : 400 ml to 500 ml Per Bag of 50 Kgs Cement)

1 litre 150.00

248 BMT-H.08 Quick setting, rapid hardening and water proofing compound - : Rapidstrong QS/Conflow SNPA or ZorirapidR or Equivalent (Dosage : 1 to 3 Litres per bag of 50 Kgs Cement depending on the setting time required).

1 litre 75.00

249 BMT-H.09 Chloride free super plasticizer for high range water reducing admixture : Roofplast SP 35/Conflow SNS I or Zoriplast SP 350 (Dosage: 200 ml to 500 ml per bag of 50 Kgs Cement) or equivalent.

Litre 68.00

250 BMT-H.10 Chloride free super plasticizer for high early strength and high range water reducing admixture: Roofplast SP 45/Conflow SNS 2 or Zoriplast SP 450 (Dosage: 200 ml to 500 ml per bag of 50 Kgs Cement) or equivalent.

Litre 75.00

251 BMT-H.11 Set accelerator and plasticizer: Roofplast SCA/ Conflow SNA or Zoriset or Equivalent (Dosage:1 Kg to 3 Kgs per bag of 50 Kgs Cement depending on the setting time required )

Kgs 70.00

252 BMT-H.12 Chloride free High power slump retaining and retarding plasticizer: Roofplast RT5/Conflow SNR or Zoriplast RT5 (Dosage: 15ml to 40 ml per bag of 50 Kgs Cement) or Equivalent.

Litre 140.00

253 BMT-H.13 Air Entraining Agent: Roofplast AEA/ Conflow SNE or Zoriplast AEA (Dosage : 5ml to 25 ml per bag of 50 Kgs Cement) or Equivalent (Dosage : 15ml per Bag of 50 Kgs Cement)

Litre 130.00


28


FOR 2013-14

1 2 3 4 5

254 BMT-H.14 Chloride free super plasticizer, high range water reducing and retarding admixture - Roofplast SR5/Conflow SNS-3 SPL or Zoriplast SRT5 (Dosage : 300 ml to 400 ml per bag of 50 Kgs Cement) or equivalent

Litre 88.00

255 BMT-H.15 Retarding super plasticizer: Conflow SNS-3 or Accelerating Plasticizers: Roofplast SA/ Zoriplast AC (Dosage: 500 ml to 1 Litre per bag of 50 Kgs Cement) or Equivalent.

Litre 72.00

256 BMT-H.16 Waterproof Cement Mortar Plasticizer: Roofpalst MP/ Morflow SN 1 or Zoriplast MP (Dosage: 100 ml per bag of 50 Kgs Cement) or Equivalent.

Litre 135.00

257 BMT-H.17 Integral Cement Waterproofing Compound : Conproof No.1/ Rainproof No.1/Conflow SNW1 or Zoriproof (Liquid Form) (Dosage : 100 ml Per Bag of 50 Kgs Cement)

Litre 150.00

258 BMT-H.18 Integral Cement Waterproofing Compound: Conproof No.1/ Rainproof No.1/Conflow SNW2 or Zoriproof (Powder Form) (Dosage: 500 Grams per bag of 50 Kgs Cement) or Equivalent.

Kg 23.00

259 BMT-H.19 High plasticizing cement waterproofing liquid based on naphthalene formaldehyde: Conproof LW 200/ Rainproof LW SPL/Conflow SNW2 - 750 Grams or Zorishield 200 or Equivalent. (Dosage:200 ml per Bag of 50 Kgs Cement)

Litre 90.00

260 BMT-H.20 Block Admixture: Roofplast BA/ Conflow SNB or Zoriplast BA (Dosage: 20 ml to 25ml per bag of 50 Kgs Cement) or Equivalent.

Litre 135.00

261 BMT-H.21 Sprayed Concrete Accelerator: Shotset SN1 or Roofplast SA/ Zoriset SCA or Equivalent (Dosage: 500 ml 2.5 Litres/bag of Cement).

Kg 68.00

262 BMT-H.22 Surface treatment water Based high power curing compounds: Curaid SN1 or Roofexcure WB/Zoricure WB (Coverage: 5-6 Sq. Mtrs / Litre / Coat) or Equivalent.

Litre 65.00

263 BMT-H.23 Concrete wax based pigmented curing compound: Curaid SN2 or Roofexcure WX/ Zoricure SB or Equivalent. (Coverage : 4-5 Sq. Mtrs / Litre / Coat )

Litre 130.00

264 BMT-H.24 Formwork & Mould Treatment: Roofcare MRA/ Shutterol SNU or Zorislip or Equivalent. (Coverage: 1 Litre Zorislip will cover approx 20 to 30 m2 on method and material of the form )

Litre 135.00

265 BMT-H.25 Cleaning and acid etching agents: Tilex Kleen AC/ Uniklen SN1 or Zorikleen AC or Equivalent.

Litre 70.00

266 BMT-H.26 Ready to use universal degreasing and cleaning agents: Tilex Kleen DA/ Uniklen SN2 or Zorikleen DA or Equivalent.

Litre 75.00

267 BMT-H.27 Liquid Cleaning Agent: Tilex Kleen LC/ Uniklen SN3 or Zorikleen LC or Equivalent.

Litre 120.00

268 BMT-H.28 Non-shrink Free flow high strength injection grout: Rapidstrong Grout GP2/ Expacrete SN50 or Zorigrout GP 2 or Equivalent. (Yield 13.5 Litres Per 25 Kgs Bag).

Kg 32.00

269 BMT-H.29 Non-shrink Free flow grout: Rapidstrong Grout GP3/Expacrete SN70 or Zorigrout GP 3

Kg 34.00


29


FOR 2013-14

1 2 3 4 5

270 BMT-H.30 Non-shrink Free flow grout: Rapidstrong Grout GP4/ Expacrete SN90 or Zorigrout GP 4

Kg 36.00

271 BMT-H.31 High strength cementitious non-shrink Free flow grout: Rapidstrong Grout Admix/ Expacem SN2 or Zorigrout GP 1 or Equivalent. (250 Grams per Bag of 50 Kgs Cement).

1 Kg pack 33.00

272 BMT-H.32 Low viscosity Epoxy resin injection grout (Two parts) :Rapidstrong Grout EP/Expacrete SNE 1 or Zorigrout EP or Equivalent.(Density 1.07 Kg Per Litre )

Kg 745.00

273 BMT-H.33 Epoxy Resin Grouts: Rapidstrong Grout EP3/ Expacrete SNE 3 or Zorigrout EP 3 or Equivalent.

Kg 158.00

274 BMT-H.34 High Power Polyester Resin Anchor Grout: Rapidstrong Grout AG/Anchoret SN1 or Zorifix or Equivalent. (Yield 0.5 Litres / 1 Kg Pack )

Kg 253.00

275 BMT-H.35 High strength, high polyester resin grouts Rapidstrong AG Pride/Anchoret SN2 or Zorifix XL or Equivalent. ( Yield 0.5 Litres / 1 Kg Pack )

Kg 470.00

276 BMT-H.36 Non-metallic Floor Hardeners: Rapidstrong NH/Flortop SNC or Zorifloor DH or Equivalent. (Coverage: May be applied at rate 3.5 Kgs /m2 over green concrete for normal traffic & 6-12 Kg / M2 for heavy traffic. Higher application rates yield better abrasion resistance)

Kg 35.00

277 BMT-H.37 None oxidizing, heavy duty metallic Floor Hardeners: Rapidstrong FM/ Flortop SNS or Zorifloor NH or Equivalent.

Kg 28.00

278 BMT-H.38 Epoxy Floor coating: Procoat SNF or Food neutral Epoxy waterproof / damp proof coating: Roofcare EP/ Zoricoat EP or Equivalent. (Coverage : 70 to 80 SFT / Per Litre / coat)

Kg 491.00

279 BMT-H.39 Polysulphide modified epoxy coatings: Procoat SNS or Roofcare EPS/Zoricoat EPS or Equivalent (Coverage : 250 to 300 Grams / M2 and forms a DFT of 175 to 200 Micron)

Kg 492.00

280 BMT-H.40 Essen putty SNE or Epoxy putty - Roofcrete Putty EP/ Zoriputty EP or Equivalent

Kg 290.00

281 BMT-H.41 Zincrich epoxy resin primer - Roofguard ZP/Procoat SNZ or Zoriguard ZP or Equivalent (Coverage : 4-5 Sq.Mtr. /Litre / Coat)

Kg 428.00

282 BMT-H.42 Chemical resistance, fungus resistance water based polyurethane sterile coating : Roofcare PU/ Procoat SNL or Zoristerile or Equivalent ( Coverage : 60 to 65 SFT / 2 Coats / Litre)

Pack 750.00

283 BMT-H.43 Solvent free chemical resistant Epoxy self levelling (for food and pharmaceutical industry) Flooring system: Armstrong FL-SL/Flortop SNSL or Zorifloor SL or Equivalent. ( 8.25 to 0.30 M2 / Kg mix with 2mm thickness )

Kg 293.00

284 BMT-H.44 Self levelling self smoothing water based epoxy floor topping : Armstrong FL-SLW/Flortop SNSL-SPL or ZORIFLOOR SLW - 1.5- 3mm or Equivalent (Coverage : 4.5m2 / 17 Kg Pack @ 2mm thickness depending on the substrate)

Kg 297.00


30


FOR 2013-14

1 2 3 4 5

285 BMT-H.45 High build heavy duty epoxy resin floor coating: Armstrong HBF/ Flortop SNM or Zorifloor HB or Equivalent. (Coverage : Base coat 10- 12 m2/ 5 Kg @ 250 microns DFT )

Kg 314.00

286 BMT-H.46 Epoxy based repair mortar / concrete: Roofcrete EP/ Flortop SNFM or Zoricrete EP or Equivalent.

Litre 398.00

287 BMT-H.47 Solvent free Epoxy resin primer for floor coatings: Florcoat SNP or Roofbond EP Primer/ Zoriprime EP or Equivalent. (Coverage: 3 Kg unit covers about 13m2 for DFT of about 120 micron.)

Pack 475.00

288 BMT-H.48 Solvent free epoxy resin primer for protective coatings Procoat SNC or Roofbond EPF Primer/ Zoriprime EPF or Equivalent (Coverage : 3 Kg unit covers about 13m2 for DFT of about 120 micron.)

Pack 495.00

289 BMT-H.49 Epoxy Primer for floor coatings and protective coatings - Procoat SNP or Roofbond EFC Primer/ Zoriprime EFC or Equivalent.

Pack 550.00

290 BMT-H.50 Epoxy primer for Hibond floor & protective coatings : Procoat SNP2 or Roofbond EFC2 Primer/ Zoriprime EFC 2

Pack 725.00

291 BMT-H.51 Cementitious Micro concrete Repair products: Repcrete SNC or Roofcrete MC/Zoricrete MC or Equivalent.

Kg 34.00

292 BMT-H.52 Repair Products:Repcrete SNE1 or Epoxy mortar - Roofcrete EP/Zoricrete EPM or Equivalent

Kg 500.00

293 BMT-H.53 Under water epoxy resin system for repair products: Repcrete SNW or Roofcrete EUW/Zoricrete EUW or Equivalent. Kg 878.00

294 BMT-H.54 Under water epoxy resin system mortar Repcrete SNW Mortar or Roofcrete EUW/Zoricrete EMU

Kg 850.00

295 BMT-H.55 Fast setting cement based plugging compound - Uniplug SN or Wonderseal Plug/Zoriplug or Equivalent ( Powder Form : mix with water direct application )

Kg 80.00

296 BMT-H.56 High durable cementitious acrylic based two pack Waterproofing systems: Aqua coat SNF or Roofbond RFX/Zoricoat RX or Equivalent. (12 14 m2 in two coats to achieve 1mm thickness )

Kg 125.00

297 BMT-H.57 Water Repellents: Aquarepel SN1 or Water based silicon water repellent, Nano technology - Rain care WR/ Zoripel WB or Equivalent

Litre 675.00

298 BMT-H.58 Tile Adhesives: Tilegrip SNU or Tilex/ Zorimix or Equivalent. (At 3mm thickness 7-9 Sqm / 25 Kgs )

Kg 17.00

299 BMT-H.59 Acrylic based Bonding Adhesives: Conbond SNA or Roofbond PB/ Zoribond PB or Equivalent. (Mix: 1:1 ratio of cement 50 SFT / Litre /coat depending on the substrate)

Litre 140.00

300 BMT-H.60 Epoxy based Bonding adhesive: Conbond SNE or Roofbond EP/Zoribond EP or Equivalent. (Coverage : 20 25 SFT / Kg /Coat)

Pack 825.00


31


FOR 2013-14

1 2 3 4 5

301 BMT-H.61 Supply of anti-corrosion admixture inhibitor liquid as per Central Electro Chemical Research Institute developed specification of Concare or Concare Plus or Roofplax SP 300/ Zoriplast AC Equivalent (200 ml to 500 ml per Bag of 50 Kgs Cement)

Litre 187.00

302 BMT-H.62 HI-BOND: Concrete Plasticizers: HI-PLAST 01 or Roofbond High plast ( Dosage : 100 ml Per Bag of 50 Kgs Cement)

Litre 150.00

303 BMT-H.63 Concrete Plasticizers: HI-PLAST 02 or Roofbond High plast 2 (Dosage : 200 ml per bag of 50 Kgs Cement)

Litre 100.00

304 BMT-H.64 Concrete Plasticizers: HI-PLAST PA or Roofbond AC Litre 102.00

305 BMT-H.65 Super Plasticizers: HI-PLAST SP or Roofbond SP 30 Litre 82.00

306 BMT-H.66 Super Plasticizers: HI-PLAST SP AR or Roofbond SP 40 Litre 102.00

307 BMT-H.67 Accelerating Plasticizers: HI-PLAST AR or Concrete plasticizing, water reducing and accelerating admixture - Roofbond PA (Dosage: 500 ml to 1000 ml Per Bag of 50 Kgs Cement) or Equivalent.

Litre 82.00

308 BMT-H.68 Retarding Plasticizers: HI-PLAST RT or Roofbond RT 30 Litre 80.00

309 BMT-H.69 Air Entraining Agents: HI-PLAST A.E or Roofbond AEA Litre 150.00

310 BMT-H.70 Retarding Super Plasticizers: HI-PLAST SP RT or Roofbond SR 30

Litre 100.00

311 BMT-H.71 HI-PLAST RSP or Roofbond SR 40 or Equivalent. Litre 110.00

312 BMT-H.72 Mortar Plasticizers: HI-PLAST MP or Roofbond MP ( Dosage : 100 ml Per Bag of 50 Kgs Cement)

Litre 160.00

313 BMT-H.73 Integral Water Proofing compounds: HI-PROOF (L) or Liquid Concentrated Micronized Cement Waterproofing Compound: Roofguard 500/Roofbond 500 (Dosage: 500 ml per bag of 50 Kgs Cement) or Equivalent.

Litre 90.00

314 BMT-H.74 HI-PROOF (P) or Conproof P/Roofbond - P or Equivalent (Dosage: 1 Kg Per Bag of 50 Kgs Cement).

Kg 25.00

315 BMT-H.75 or Roofbond 750 or Equivalent Litre 70.00

316 BMT-H.76 Block Admixtures: HI-ADMIX or Roofbond BA or Equivalent ( Dosage : 20 ml Per bag of 50 Kgs Cement)

Litre 22.00

317 BMT-H.77 Sprayed Concrete Accelerators: HI-ACCEL or Roofbond SA or Equivalent. ( Dosage : 50 Grams to 1 Kg Per Bag of 50 Kgs Cement)

Kg 60.00

318 BMT-H.78 Surface Treatments curing compounds: HI-CURE 01 or Roofex WB /Roofcoat/ Zoricoat

Litre 475.00

319 BMT-H.79 Surface Treatments Polyurethane curing compounds: HI-CURE 02 or Roofex WXB/ Roofcare PU/ Zoricoat PU

Litre 300.00

320 BMT-H.80 Surface Treatments Crystalline Repair Products: HI-CRM or Roofex GP2 or Zoripex Equivalent

Kg 32.00

321 BMT-H.81 Polyurethane Sealant - Roof seal PU/ Zoriseal PUHI-CRM EX or Roofex EC or Equivalent

Kg 687.00

322 BMT-H.82 Polyurethane Sealant - Roof seal PS/ Zoriseal PS/HI-CRM EXW or Roofex EW or Equivalent.

Kg 625.00

323 BMT-H.83 HI-CRM EX M or Structural graded polymer modified reinstatement concrete / mortar Roofcrete AR/ Zoricrete CMG or Equivalent

Kg 78.00


32


FOR 2013-14

1 2 3 4 5

324 BMT-H.84 Water Proofing: HI-SHIELD or Liquid applied single component, elastomeric waterproofing membrane coating with -Rain seal/ Zoricoat XL or Equivalent. (Coverage : 50 to 60 SFT Per Litre / Coat ) ( for brush / spray application add 20% water per Litre ) As a primer coat application dilute with water @ of 1: 1 ratio recommended.

Litre 350.00

325 BMT-H.85 Water Repellents: HI-REPEL or Solvent based silicon water repellent compound - Roofcare WR/Zoripel SB or Equivalent. (Direct application )

Litre 325.00

326 BMT-H.86 Tile Adhesives: HI-ADHESIVE or High strength tile adhesive (tile on tile): Tilex Grout Hi- Grip/ Zorimix Hi-Grip or Equivalent. ( At 3mm thickness 7-9 Sqm / 25 Kgs )

Kg 22.00

327 BMT-H.87 Supply of Concare-XL Anti Corrosion and leak proof Crack Proof ,Water Proof ,Concrete Hardener Admixture liquid Dosage (200 ml to 250 ml per Bag of Cement

Litre 275.00

328 BMT-H.88 HI-FIX HFE or Epoxy tile mortar - Tilex EH/ Zorimix EH or Equivalent

Pack 130.00

329 BMT-H.89 HI-BOND Wall Putty Normal or Grey cement based Gypsum Plaster Wall strong GP/Zoritek GP or Equivalent (Coverage : 35 to 40 SFT per bag of 40 Kgs Pack)

Kg 13.00

330 BMT-H.90 HI-BOND Wall Putty Fine or Portland cement based plaster finish surface for interior Wall strong PC/ Zoritek PC or Equivalent.

Kg 14.00

331 BMT-H.91 HI-BOND Wall Putty Super Fine or Acrylic based ready to use surface (white / off white) -Wall strong WC/ Zoritek WC or Equivalent. (At 1.5 to 2mm thickness 100 - 125 SFT Per Bag of 25 Kgs Pack )

Kg 15.00

332 BMT-H.92 HI-BOND Wall Putty Super Fine (Water Resistant) or Smooth crack free, water resistant finish plaster Wall strong WP/ Zoritek WP or Equivalent

Kg 39.00

333 BMT-H.93 POLY-SULPHIDE, BITUMINOUS HOT SEALING COMPOUND: Grade 'A' I.S.I excluding ST or Rainseal BS/ Zoriseal BS Grade A or Equivalent

1 Kg 90.00

334 BMT-H.94 Bitumen solution primer of approved quality: Rainseal BT primer/ Zoriprime BT or Equivalent.

1 Kg 80.00

335 BMT-H.95 Tarfelt Rainseal Felt/ Zorifelt BT Type : 2 Grade : 1 or Equivalent

1 sqm 120.00

336 BMT-H.96 Supply and application of Liquid admixture for concrete with high resistance against water ingress and having surface active agents & refined lignosulphonate Rheomac 707 of BASF

1 Litre 92.00

337 BMT-H.97 Supply and application of two component acrylic modified cementitious system for forming coating to waterproof and resurface concrete, masonry and other construction materials waterproof and flexible coating MASTERSEAL 550 GREY of BASF

1 Kg 69.00


33


FOR 2013-14

1 2 3 4 5

338 BMT-H.98 Supply and application of Elastomeric flexible two component polymers modified cementitious system for forming waterproof coating on concrete, masonry & other construction material up to 2mm thick MS550 EL membrane and reinforced with 100% virgin polypropylene woven fabric MASTERSEAL 550 EL of BASF

1 Kg 82.00

339 BMT-H.99 Supply and application of grey cementitious powder polymer additive and cement-based adhesive for fixing ceramic & vitrified wall and floor tiles, quarry tiles and similar materials MASTERTILE 25 of BASF

1 Kg 21.00

340 BMT-H.100 Supply and application of premixed, non-metallic, ready to use powder, designed for application as a dry shake over freshly floated concrete floors or floor screeds to obtain a monolithic floor with enhanced abrasion resistance MASTERTOP 100 (GREY) of BASF

1 Kg 21.00

341 BMT-H.101 Supply and application of synthetic polymers to impart rheoplastic qualities to concrete RHEOBUILD 920 (SH) of BASF

1 Kg 63.00

342 BMT-H.102 Supply of Concare-Plus Admixture Anti Corrosion and leak proof Weather Proof, Concrete Hardener Admixture. Dosage (200 ml to 250 ml per Bag of Cement )

1 Litre 250.00

343 BMT-H.103 Supply of Concare-LP polymer based, leak proof, Admixture liquid, dosage (250 ml to 300 ml per Bag of Cement )

1 Litre 180.00

344 BMT-H.104 Supply Con- life Water Proof, Leak Proof, Concrete Hardener, Rust Proof, Admixture Liquid Dosage (200 ml to 250 ml per Bag of Cement )

1 Litre 270.00

345 BMT-H.105 Supply of Contech 2000 bio Product (Powder) Anti Corrosion leak proof, Crack Proof, Chemical Resistant, whether proof, inhibitor liquid. Dosage (5 to 10% of cement weight Cement ) and 15% in serve environmental Condition like marine structures / coastal structures and chemical structures, Godowns, effect

1 Kg 290.00

346 BMT-H.106 Supply of Con Cura Self Curing Agent Admixture for Concrete. Dosage (100 ml 250ml per bag (50kgs) of cement depending on the atmospheric temperature and humidity)

1 Litre 1,200.00

347 BMT-H.107 Supply of Con Grout Epoxy Pourable Crack / Gap Filling Grout System. Dosage (Varies with climate, Site / Substrate Status. Average density is 1.20 Kg / Ltr (System)

1 Kg 3,300.00

348 BMT-H.108 Supply of Con Mix XL Liquid super Plasticizer And Waterproofing With Anti Corrosive properties. Dosage (100 Ml 1ltr Per bag (50Kg)of Cement) Dosage Should be finalized after initial site trials

1 Litre 450.00

I GLASS

349 BMT-I.01 Plain Float Glass 4 mm thick 1 sqm 412.00

350 BMT-I.02 Plain Float Glass 5 mm thick 1 sqm 521.00

351 BMT-I.03 Plain Float Glass 6 mm thick 1 Sqm 647.00





34


FOR 2013-14

1 2 3 4 5

355 BMT-I.07 Tinted - Bronze/ Green Glass 4 mm thick 1 sqm 481.00

356 BMT-I.08 Tinted - Bronze/ Green Glass 5 mm thick 1 sqm 601.00

357 BMT-I.09 Tinted - Bronze/ Green Glass 6 mm thick 1 Sqm 721.00




361 BMT-I.13 Pin headed Glass 4 mm thick 1 sqm 309.00

362 BMT-I.14 Pin headed Glass 5 mm thick 1 sqm 401.00

363 BMT-I.15 Frosted / Ground Glass 4 mm thick 1 sqm 555.00

364 BMT-I.16 Frosted / Ground Glass 5 mm thick 1 sqm 697.00

365 BMT-I.17 Toughened Plain Glass 5 mm (including Glass) 1 sqm 836.00





J PAINTS & POLISHES

370 BMT-J.01 Supply of water based Cement Primer of Interior Grade- 1 1 Kg 134.00

371 BMT-J.02 Supply of water based Cement Primer of Exterior Grade- 2 1 Kg 80.00

372 BMT-J.03 Supply of Red Oxide Primer Paint for iron works of Grade -1 1 Litre 121.00

373 BMT-J.04 Supply of Zinc Chromate Yellow Oxide Primer paint for iron works

1 Litre 175.00

374 BMT-J.05 Supply of Wood Primer 1 Litre 135.00

375 BMT-J.06 Supply of Metal paste (Putty) for steel works 1 Kg 135.00

376 BMT-J.07 Supply of Putty for wood work 1 Kg 135.00

377 BMT-J.08 Supply of White Lead 1 Kg 97.00

378 BMT-J.09 Supply of Synthetic clear Varnish 1 Litre 135.00

379 BMT-J.10 Supply of Spirit 1 Litre 95.00

380 BMT-J.11 Supply of Linseed Oil 1 Litre 54.00

381 BMT-J.12 Supply of thinner for melamine polish/ French polish 1 Litre 125.00

382 BMT-J.13 Supply of thinner for Polyurethane polish 1 Litre 256.00

383 BMT-J.14 Supply of French Polish 1 Litre 177.00

384 BMT-J.15 Supply of readymade Wax Polish 1 Kg 540.00

385 BMT-J.16 Supply of Melamine Polish 1 Litre 299.00

386 BMT-J.17 Supply of Interior Grade Polyurethane Polish 1 Litre 608.00

387 BMT-J.18 Supply of Exterior Grade Polyurethane Polish 1 Litre 743.00

388 BMT-J.19 Supply of wood adhesive compound 1 Kg 211.00

389 BMT-J.20 Supply of Dry Powder Distemper 1 Kg 40.00

390 BMT-J.21 Supply of acrylic based Oil Bound washable Distemper having VOC (Volatile Organic Compound ) content less than 50 grams/ litre

1 Kg 81.00

391 BMT-J.22 Supply of synthetic polymer plastic emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ litre. 1 Litre 244.00

392 BMT-J.23 Supply of synthetic polymer luxury plastic emulsion paint of superior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre.

1 Litre 405.00

393 BMT-J.24 Supply of Water proof Cement paint 1 Kg 47.00


35


FOR 2013-14

1 2 3 4 5

394 BMT-J.25 Supply of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ litre.

1 Litre 183.00

395 BMT-J.26 Supply of water proof Cement paint pack 25 Kg 1,106.00

396 BMT-J.27 Supply of paint grade white lime for wash 25 Kg 515.00

397 BMT-J.28 Supply of anti-corrosive grade - 1 bitumen paint of black colour 1 Litre 487.00

398 BMT-J.29 Supply of grade-1 aluminium paint 1 Litre 244.00

399 BMT-J.30 Supply of ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound) content less than 50 grams/ litre.

1 Litre 230.00

400 BMT-J.31 Supply of ready mixed Synthetic Enamel paints in all shades Grade - II having VOC (Volatile Organic Compound) content less than 50 grams/ litre.

1 Litre 175.00

401 BMT-J.32 Deleted








409 BMT-J.40 Supply of wall putty of White Cement or Polymer or Cement based

20 Kg 650.00

410 BMT-J.41 Altek / PMCC or Equivalent top coat high UV resistant exterior paint

25 Kg 1,464.00

411 BMT-J.42 Altek / PMCC / Deco orient base or Equivalent exterior Texture. 25 Kg 631.00

412 BMT-J.43 Altek / PMCC or Equivalent Gold line Exterior Texture 25 Kg 1,112.00

413 BMT-J.44 Deleted 1 Sqm Deleted








K PARTICLE BOARDS

421 BMT-K.01 Plain Particle Board: Interior Grade - 6 mm thick 1 Sqm 243.00

422 BMT-K.02 Plain Particle Board: Interior Grade - 8 mm thick 1 Sqm 261.00

423 BMT-K.03 Plain

Building Ssr 2013-14

Documents