Description and Use TM PS-100 High Performance Sealant: StructureSeal PS-100 is a highly elastic super adhesion polyether moisture cure sealant that cures quickly to form a soft rubber seal. Struc- tureSeal is designed to be a weatherproofing sealant for use on roofs, walls, flashings, expan- sion joints, windows, and doors. StructureSeal is compatible for use with many building materi- als including: coated metals, glass, EIFS, galva- nized steel, masonry, and many other common building materials. Advantages Features: • Strong adhesion to Kynar coated metals • Excellent adhesion flexibility • 100% VOC compliant • Solvent free - 100% solids will not shrink • Non-slump, applies vertically and over- head • 30 minute skin over • +/- 50% joint movement • Unaffected by UV light • Can be applied at temperatures as low as 30 degrees • Paintable within 24 hours Regulatory Compliance: • Conforms to OTC Rule for Sealants • Conforms to USDA Requirements for Non- food Contact • Meets requirements of California Regs: CARB, BAAQMD and SCAQMD • Conforms to California Proposition 65 Building Products GroupTM / Product Guide Building Products Group TM A AGroup Subsidiary Green Standards: • LEED 2.2 for New Construction and Major Renovations: Low Emitting Ma- terials (Section 4.1) 1 Point • NAHB Model Green Home Building Guidelines: 5 Global Impact Points • VOC Content: less than 19 grahms/li- ter ASTM D2369 EPA Method 24 Product Details: • 10.1 oz (300 ml) cartridges - 24 car- tridges/carton, 45 cartons/pallet • Color - Neutral gray • Quantity discounts available • Made in Michigan Refer to the Material Safety Data Sheet and product label prior to using this product. TM StructureSeal PS-100 high performance sealant. DNA Matters...Designed for Performance www.structuretecbpg.com • (855) 2USE BPG • (855) 287-3274 Group - Solutions for the Built Environment