www.OldStateCapitol.org www.BuildYourOwnMainStreet.org Left End B C E Right End www.Lincoln200.net www.illinois-history.gov www.LookingforLincoln.com B C F 1 Back Wall Glue Back Roof to this Tab C D Shastid Cabin, Pittsfield, IL Front Wall Glue Front Roof to this Tab A B G I H J Photo of complete model Printed image Fold red lines and letters forward Fold green lines and letters backward Lightly score then fold black dotted lines Basic Directions: www.Lincoln200.net www.illinois-history.gov www.LookingforLincoln.com www.OldStateCapitol.org www.BuildYourOwnMainStreet.org BUILD YOUR OWN LINCOLN SITES PAGE of 2 SHASTID CABIN PITTSFIELD, ILLINOIS
2
Embed
BUILD YOUR OWN LINCOLN SITES - Model Train Set Building ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
1. Cut out the Front and Back Roof pieces. Cut thru the Roof pieces at the white lines for the chimney later. Fold all dotted lines.2. Glue the Back roof to the Sides using tabs G thru J and to the Back wall tab. 3. Glue the Front Roof to the Sides, using tabs E and F, to theFront wall tab, and to the back roof tab. The Front Roof top edge will project over the ridge 1/16th inch approximately. 4.
5. Glue the Chimney to the Roofs by inserting the tab in the slots.
Cut out the Chimney and glue up into a box using tab K andthe blank tab under the chimney top.
To Add Sides and Back:
1. Cut out the Side and Back pieces. Fold all dotted lines. 2. Glue the Front onto the Left and Right Sides using tabs A and B.3. .4. Glue the corners of all bottom tabs to create a base.
Glue the Back onto the sides using tabs C and D
2
Bottom edge of Back Roof
Fold this tab down about 30 deg. to fit pitch of roof. The top of the Front roof will be glued to here.