Build your own LEGO® Raspberry Pi case Inspirational ideas The footprint of your Raspberry Pi case should be a minimum of 13x9. The sides are built using 1 dot width bricks. If you want to use the wider 2 dot you need to make your base larger accordingly. It is a good idea to raise the Raspberry Pi with the radiator grillle bricks. Leave spaces for all your connectors/ ports. You could add doors/shutters/ hinges etc. Use the smooth top bricks to finish the sides. Finally make a lid for your base. ferret boy Roo Reynolds LEGO, the LEGO logo and the Minifigure are trademarks of the LEGO Group. ©2015 The LEGO Group. © 2015 The University of Edinburgh. Some rights reserved. This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-sa/4.0/. Created by the Interactive Content Service, The University of Edinburgh. http://www.ed.ac.uk/is/interactive-content Joel Adria