www.metalmont.it • Bearings temperature probes. • Anti-clogging device on elevator head. • Belt misalignment control device on the head. • Belt misalignment control device on the foot. • Dust suction fitting between elevator legs (standard for ET-150/200/250). • Steel or stainless steel buckets. • Self-extinguishing and food-grade belts. • Execution in painted steel or in stainless steel. • Explosion proof execution according to the ATEX directive. • Additional feeding hopper. • Two or three inlets hopper. • Service platforms, rest platforms, ladders. AVAILABLE ACCESSORIES AND SPECIAL VERSIONS ET SERIES ET SERIES Via Guglielmo Marconi, 92 31020 Revine Lago - Treviso - Italy tel +39 0438 562028 BUCKET ELEVATORS TECHNICAL DATA Data and features are not binding. The company reserves the right to make changes without notice. Technical Data / Model ET-040 ET-060 ET-120 ET-150 ET-200 ET-250 Capacity* t/h 40 60 120 150 200 250 Belt speed m/s 2,9 2,9 2,9 2,9 2,9 2,9 Buckets width/Belt width mm 140/160 180/220 240/270 280/320 300/330 330/360 Belt type Antistatic and oil resistant black rubber N. of buckets/m n. 9 6 6,5 5,5 5 5,5 Buckets material Polyethylene Legs thickness mm 2 2 2 2,5 2,5 2,5 Wear plate on the head (polyethylene) mm 8 8 8 8 8 8 Dimensions / Model ET-040 ET-060 ET-120 ET-150 ET-200 ET-250 A - Height of the head mm 940 1204 1240 1511 1511 1511 B - Height of the foot mm 911 1031 1281 1524 1524 1524 C - Frontal width of the legs mm 190 268 336 445 445 445 D - Lateral width of the legs mm 180 228 278 345 345 345 H - Standard legs heights mm 500/1000/1500/2000 Q - Size of the square inlet/outlet mm 210 210 300 300 350 350 *Capacity based on wheat S.G. 0,78 t/m3; moisture 15%; Impurities 2%; machine horizontal B 1500 - ISPEZIONE H=500-1000-1500-2000 A Q Q D C Q DX bucket elevators The highest performances in the agroindustrial sector